This commit moves many features of individual distro tests into the base
class so that other test cases can utilize them. It also standardizes
the pattern for tests adding assumptions for the particular
distributions to test.
Most of our CLI tools use the Terminal class, which previously did not provide methods for writing to standard output. When all output goes to standard out, there are two basic problems. First, errors and warnings are "swallowed" in pipelines, making it hard for a user to know when something's gone wrong. Second, errors and warnings are intermingled with legitimate output, making it difficult to pass the results of interactive scripts to other tools.
This commit adds a second set of print commands to Terminal for printing to standard error, with errorPrint corresponding to print and errorPrintln corresponding to println. This leaves it to developers to decide which output should go where. It also adjusts existing commands to send errors and warnings to stderr.
Usage is printed to standard output when it's correctly requested (e.g., bin/elasticsearch-keystore --help) but goes to standard error when a command is invoked incorrectly (e.g. bin/elasticsearch-keystore list-with-a-typo | sort).
The java based distribution tests currently have a single Tests class
which encapsulates all of the tests for a particular distribution. The
test task in gradle then depends on all distributions being built, and
each individual tests class looks for the particular distribution it is
trying to test. This means that reproducing a single test failure
triggers all the distributions to be built, even though only one is
needed for the test.
This commit reworks the java distribution tests to pass in a particular
distribution to be tested, and changes the base test classes to be
actual test classes which have assumptions around which distributions
they operate on. For example, the archives tests will be skipped when
run with an rpm distribution, and vice versa for the package tests. This
makes reproduction much more granular. It also also better splitting up
tests around a particular use case. For example, all tests for systemd
behavior can be in one test class, and run independently of all tests
against rpm/deb distributions.
This commit addresses an issue when trying to using Elasticsearch on
systems with Sys V init and the bundled JDK was not being used. Instead,
we were still inadvertently trying to fallback on the path. This commit
removes that fallback as that is against our intentions for 7.x where we
only support the bundled JDK or an explicit JDK via JAVA_HOME.
The system level tests for our distributions have historically be run in
vagrant, and thus the name of the gradle project has been "vagrant".
However, as we move to running these tests in other environments (eg
GCP) the name vagrant no longer makes sense. This commit renames the
project to "os" (short for operating system), since these tests ensure
all of our distributions run correctly on our supported operating
systems.
The bats tests currently require many additional artifacts to be built.
In addition to the current distributions, they need all the plugins to
be installed, as well as a randomly chosen bwc distribution. This commit
splits these two cases into their own bats task, so the dependencies do
not slow down other tasks like distroTests which do not need them.
The distro test plugin was originally designed to be applied within each
subproject, per operating system we run in a VM with vagrant. However,
for efficiency, and also ease of having a single task to run in CI when
launching within individual OS VMs, having the "destructive" tasks in a
single place is more convenient. This commit reworks the distro test
plugin to be applied to the qa/vagrant project, which now creates only
the wrapper tasks in each of the subprojects for each vagrant VM.
The vagrant based tests currently reside in a single project, creating
dozens of tasks to manage starting and stopping the vagrant VM along
with running java and bats tests within each image. This all-in-one
pattern makes parallelizing packaging tests difficult.
This commit rewrites the vagrant testing infrastructure to be
independent of the actual test runners, thus allowing each platform to
be handled in a separate subproject. Additionally, the java and bats
tests are changed to be run through a "destructive" gradle task, which
is run inside the VM. The combination of these will allow
parallelization both locally (through running several VMs at once) as
well as running the destructive tasks in CI machines dedicated to each
platform (thus removing the need for vagrant in CI).
* Restrict which tasks can use testclusters
This PR fixes a problem between the interaction of test-clusters and
build cache.
Before this any task could have used a cluster without tracking it as
input.
With this change a new interface is introduced to track the tasks that
can use clusters and we do consider the cluster as input for all of
them.
This commit applies a normalization process to environment paths, both
in how they are stored internally, also their settings values. This
normalization is done via two means:
- we make the paths absolute
- we remove redundant name elements from the path (what Java calls
"normalization")
This change ensures that when we compare and refer to these paths within
the system, we are using a common ground. For example, prior to the
change if the data path was relative, we would not compare it correctly
to paths from disk usage. This is because the paths in disk usage were
being made absolute.
Today we recover a replica by copying operations from the primary's translog.
However we also retain some historical operations in the index itself, as long
as soft-deletes are enabled. This commit adjusts peer recovery to use the
operations in the index for recovery rather than those in the translog, and
ensures that the replication group retains enough history for use in peer
recovery by means of retention leases.
Reverts #38904 and #42211
Relates #41536
Backport of #45136 to 7.x.
Deprecation logger was filtering log entries by key, that means that if two log messages with the same key are logged from different users, then the second log messages will be filtered.
This change allows to log deprecation message with the same key by different users.
relates #41354
backport #44587
* Mute failing test
tracked in #44552
* mute EvilSecurityTests
tracking in #44558
* Fix line endings in ESJsonLayoutTests
* Mute failing ForecastIT test on windows
Tracking in #44609
* mute BasicRenormalizationIT.testDefaultRenormalization
tracked in #44613
* fix mute testDefaultRenormalization
* Increase busyWait timeout windows is slow
* Mute failure unconfigured node name
* mute x-pack internal cluster test windows
tracking #44610
* Mute JvmErgonomicsTests on windows
Tracking #44669
* mute SharedClusterSnapshotRestoreIT testParallelRestoreOperationsFromSingleSnapshot
Tracking #44671
* Mute NodeTests on Windows
Tracking #44256
In https://github.com/elastic/elasticsearch/pull/41913 setting up the
temp dir for ES was moved from the env script to individual cli scripts.
However, moving it to the windows service cli was missed. This commit
restores setting up the temp dir for the windows service control script.
Test clusters currently has its own set of logic for dealing with
finding different versions of Elasticsearch, downloading them, and
extracting them. This commit converts testclusters to use the
DistributionDownloadPlugin.
This is a refactor to current JSON logging to make it more open for extensions
and support for custom ES log messages used inDeprecationLogger IndexingSlowLog , SearchSLowLog
We want to include x-opaque-id in deprecation logs. The easiest way to have this as an additional JSON field instead of part of the message is to create a custom DeprecatedMessage (extends ESLogMEssage)
These messages are regular log4j messages with a text, but also carry a map of fields which can then populate the log pattern. The logic for this lives in ESJsonLayout and ESMessageFieldConverter.
Similar approach can be used to refactor IndexingSlowLog and SearchSlowLog JSON logs to contain fields previously only present as escaped JSON string in a message field.
closes#41350
backport #41354
* Testclusters: Convert additional projects
Found some more that were not using testclusters from elasticsearch-ci/1
* Allow IOException too
* Make the client more resilient
This test is likely to kill the server in the middle of writing logs. This means that we can end up with logs with partially written json log lines and standard json parsers would fail on this.
This fix is to use regular expressions on json logs.(just like the previous approach on plain text logs)
closes#43413
In hamcrest 2.1 warnings for unchecked varargs were fixed by hamcrest using @SafeVarargs for those matchers where this warning occurred.
This PR is aimed to remove these annotations when Matchers.contains ,Matchers.containsInAnyOrder or Matchers.hasItems was used
backport #41528
We had this as a dependency for legacy dependencies that still needed
the Log4j 1.2 API. This appears to no longer be necessary, so this
commit removes this artifact as a dependency.
To remove this dependency, we had to fix a few places where we were
accidentally relying on Log4j 1.2 instead of Log4j 2 (easy to do, since
both APIs were on the compile-time classpath).
Finally, we can remove our custom Netty logger factory. This was needed
when we were on Log4j 1.2 and handled logging in our own unique
way. When we migrated to Log4j 2 we could have dropped this
dependency. However, even then Netty would still pick up Log4j 1.2 since
it was on the classpath, thus the advantage to removing this as a
dependency now.
ES does not accept doc type starting with underscore until 6.2.0. We
have to use "doc" instead of "_doc" in FullClusterRestartIT if we are
upgrading from a 6.2.0- cluster.
Closes#42581
This change verifies and aborts recovery if source and target have the
same syncId but different sequenceId. This commit also adds an upgrade
test to ensure that we always utilize syncId.
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
This commit adds deletion of the bin directory to postrm cleanup. While
the package's bin files are cleaned up by the package manager, plugins
may have created subdirectories under bin. We already cleanup plugins,
but not the extra bin dirs their installation created.
closes#18109
The deb package has been updated several times in the past to contain
overrides in order to pass lintian inspection. However, there have never
been any tests to ensure we do not fallback to failure. This commit
updates the overrides file given things that have changed since 2.x like
adding ML and bundling the jdk.
closes#17185
We have faked some Ivy repositories on a few artifact locations. Today
when Gradle attempts to resolve these artifacts, it follows its default
strategy to search for Gradle metadata, then Maven POM files, then Ivy
descriptors, and finally will fallback to looking directly for the
artifact. This wastes times on remote network calls that will 404 anyway
since these metadata resources will not exist for these fake Ivy
repositories. This commit overrides the Gradle strategy to look directly
for artifacts.
When Elasticsearch is run from a package installation, the running
process does not have permissions to write to the keystore. This is
because of the root:root ownership of /etc/elasticsearch. This is why we
create the keystore if it does not exist during package installation. If
the keystore needs to be upgraded, that is currently done by the running
Elasticsearch process. Yet, as just mentioned, the Elasticsearch process
would not have permissions to do that during runtime. Instead, this
needs to be done during package upgrade. This commit adds an upgrade
command to the keystore CLI for this purpose, and that is invoked during
package upgrade if the keystore already exists. This ensures that we are
always on the latest keystore format before the Elasticsearch process is
invoked, and therefore no upgrade would be needed then. While this bug
has always existed, we have not heard of reports of it in practice. Yet,
this bug becomes a lot more likely with a recent change to the format of
the keystore to remove the distinction between file and string entries.
hamcrest has some improvements in newer versions, like FileMatchers
that make assertions regarding file exists cleaner. This commit upgrades
to the latest version of hamcrest so we can start using new and improved
matchers.
The pid dir for both systemd and init.d is already managed by those
respective systems (tmpfiles.d and the init script, respectively). Since
the /var/run dir is often mounted as tmpfs, it does not make sense to
have the elasticsearch pid dir added by the package installation. This
commit removes that empty dir from deb and rpm.
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
If the relocation is throttled, the subsequent search request on the
target node (i.e., with preference _only_nodes=target_node) will fail
because some shards have not moved to that node yet. With this change,
we will wait for the relocation happens by busily checking the routing
table of the testing index on the target node.
Closes#34950
* Avoid sharing source directories as it breaks intellij
* Subprojects share main project output classes directory
* Fix jar hell
* Fix sql security with ssl integ tests
* Relax dependency ordering rule so we don't explode on cycles
There were some test failures caused by the background retention lease sync running on a relocated
primary. This commit fixes the situation that triggered the assertion and reactivates the failing test.
Closes#40731
This commit deprecates versions of Java prior to Java 11. This commit
will cause a warning to be printed to standard error when any command
line tool is invoked, or when Elasticsearch is started. Additionally, we
log a deprecation message when Elasticsearch is started.
We recently introduced the option to minimize network roundtrips when
executing cross-cluster search requests. All the changes made around
that are separately unit tested, and there are some yaml tests that
exercise the new code-path which involves multiple coordination steps.
This commit adds new integration tests that compare the output given by
CCS when running the same queries using the two different execution
modes available.
Relates to #32125
On windows, JAVA_HOME is currently resolved when the windows service is started. However, this is contrary to what our documentation states. This commit moves resolution to service install. This has the side effect of making java existence checking optional in elasticsearch-env.bat, since the rest of the service commands do not require java.
closes#30720
With this change, we will dump the recovery state if we fail to get doc
count for a given index with a preference in rolling upgrade tests. We
should have more information to look into why the provided preference is
not valid. I also unmuted `testRelocationWithConcurrentIndexing` in this
change.
Relates #34950
When a node is repurposed to master/no-data or no-master/no-data, v7.x
will not start (see #37748 and #37347). The `elasticsearch repurpose`
tool can fix this by cleaning up the problematic data.
This commit adds cd $ES_HOME to elasticsearch-env and removes it from
elasticsearch. This way, both elasticsearch and elasticsearch-cli are
executed with the working directory set to $ES_HOME. The need for the
fix arose from the following bug:
1. Explicitly set path.data to relative to ES_HOME path in
elasticsearch.yml.
2. Run elasticsearch from any directory. Elasticsearch is able to
correctly start.
3. Stop elasticsearch.
4. Run elasticsearch-node unsafe-bootstrap, not from ES_HOME directory.
It will fail with an exception.
This commit fixes the issue and adds a new test.
This PR fixes the issue and adds a new test.
Also tests >=100 are renamed because alphabetic order does not work for
them.
(cherry picked from commit 2ffc29306ff7366efc598e7b4dd2ce528895cd3a
with fixes by #40083 and #40118)
This commit removes the cluster state size field from the cluster state
response, and drops the backwards compatibility layer added in 6.7.0 to
continue to support this field. As calculation of this field was
expensive and had dubious value, we have elected to remove this field.
This commit adds a variant for every official distribution that omits
the bundled jdk. The "no-jdk" naming is conveyed through the package
classifier, alongside the platform. Package tests are also added for
each new distribution.
Computing the compressed size of the cluster state on every invocation
of cluster:monitor/state action is expensive, and the value of this
field is dubious anyway. Therefore we want to remove computing this
field. As a first step, we stop computing and return this field by
default. To avoid breaking users, we will give them a system property to
use to tide them over until the next major release when we will actually
remove this field. This comes with a deprecation warning too, and the
backport to the appropriate minor will also include a note in the
migration guide. There will be a follow-up to remove this field in the
next major version.
Executors of type fixed_auto_queue_size (i.e. search / search_throttled) wrap runnables into
TimedRunnable, which is an AbstractRunnable. This is dangerous as it might silently swallow
exceptions, and possibly miss calling a response listener. While this has not triggered any failures in
the tests I have run so far, it might help uncover future problems.
Follow-up to #36137
* Bundle java in distributions
Setting up a jdk is currently a required external step when installing
elasticsearch. This is particularly problematic for the rpm/deb packages
as installing a jdk in the same package installation command does not
guarantee any order, so must be done in separate steps. Additionally,
JAVA_HOME must be set and often causes problems in selecting a correct
jdk when, for example, the system java is an older unsupported version.
This commit bundles platform specific openjdks into each distribution.
In addition to eliminating the issues above, it also presents future
possible improvements like using jlink to build jdk images only
containing modules that elasticsearch uses.
closes#31845
a test was splitting a json log message with a wrong line separator.
Using System.lineSeparator consistently prevents this problem
closes#39829
backport#39830
* Back port build changes from #39102
This back-ports how versions are determined and bwc test are set up from
#39102 without enabling the bwc from current version tests so it's
easier/possible to backmerge future buld changes.
It's expected that the tets are lacking many of the required fixes in
this version to enable them.
Backport support for replicating closed indices (#39499)
Before this change, closed indexes were simply not replicated. It was therefore
possible to close an index and then decommission a data node without knowing
that this data node contained shards of the closed index, potentially leading to
data loss. Shards of closed indices were not completely taken into account when
balancing the shards within the cluster, or automatically replicated through shard
copies, and they were not easily movable from node A to node B using APIs like
Cluster Reroute without being fully reopened and closed again.
This commit changes the logic executed when closing an index, so that its shards
are not just removed and forgotten but are instead reinitialized and reallocated on
data nodes using an engine implementation which does not allow searching or
indexing, which has a low memory overhead (compared with searchable/indexable
opened shards) and which allows shards to be recovered from peer or promoted
as primaries when needed.
This new closing logic is built on top of the new Close Index API introduced in
6.7.0 (#37359). Some pre-closing sanity checks are executed on the shards before
closing them, and closing an index on a 8.0 cluster will reinitialize the index shards
and therefore impact the cluster health.
Some APIs have been adapted to make them work with closed indices:
- Cluster Health API
- Cluster Reroute API
- Cluster Allocation Explain API
- Recovery API
- Cat Indices
- Cat Shards
- Cat Health
- Cat Recovery
This commit contains all the following changes (most recent first):
* c6c42a1 Adapt NoOpEngineTests after #39006
* 3f9993d Wait for shards to be active after closing indices (#38854)
* 5e7a428 Adapt the Cluster Health API to closed indices (#39364)
* 3e61939 Adapt CloseFollowerIndexIT for replicated closed indices (#38767)
* 71f5c34 Recover closed indices after a full cluster restart (#39249)
* 4db7fd9 Adapt the Recovery API for closed indices (#38421)
* 4fd1bb2 Adapt more tests suites to closed indices (#39186)
* 0519016 Add replica to primary promotion test for closed indices (#39110)
* b756f6c Test the Cluster Shard Allocation Explain API with closed indices (#38631)
* c484c66 Remove index routing table of closed indices in mixed versions clusters (#38955)
* 00f1828 Mute CloseFollowerIndexIT.testCloseAndReopenFollowerIndex()
* e845b0a Do not schedule Refresh/Translog/GlobalCheckpoint tasks for closed indices (#38329)
* cf9a015 Adapt testIndexCanChangeCustomDataPath for replicated closed indices (#38327)
* b9becdd Adapt testPendingTasks() for replicated closed indices (#38326)
* 02cc730 Allow shards of closed indices to be replicated as regular shards (#38024)
* e53a9be Fix compilation error in IndexShardIT after merge with master
* cae4155 Relax NoOpEngine constraints (#37413)
* 54d110b [RCI] Adapt NoOpEngine to latest FrozenEngine changes
* c63fd69 [RCI] Add NoOpEngine for closed indices (#33903)
Relates to #33888
Finding java on the path is sometimes confusing for users and
unexpected, as well as leading to a different java being used than a
user expects. This commit adds warning messages when starting
elasticsearch (or any tools like the plugin cli) and using java found
on the PATH instead of via JAVA_HOME.
This test failed on 7.1 when running full cluster restart tests against pre-7.0
clusters (e.g. 6.6 clusters). The fixes the expected type in the
templates after the cluster restart.
Instead of using `WarningsHandler.PERMISSIVE`, we only match warnings
that are due to types removal.
This PR also renames `allowTypeRemovalWarnings` to `allowTypesRemovalWarnings`.
Relates to #37920.
The hardcoded '\n' in string will not work in Windows where there is a
different line separator. A System.lineSeparator should be used to make
it work on all platforms
closes#38705
backport #38771
* Rename integTest to bwcTestSample for bwc test projects
This change renames the `integTest` task to `bwcTestSample` for projects
testing bwc to make it possible to run all the bwc tests that check
would run without running on bwc tests.
This change makes it possible to add a new PR check on backports to make
sure these don't break BWC tests in master.
* Rename task as per PR
This commit adds the 7.1 version constant to the 7.x branch.
Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
We have had various reports of problems caused by the maxRetryTimeout
setting in the low-level REST client. Such setting was initially added
in the attempts to not have requests go through retries if the request
already took longer than the provided timeout.
The implementation was problematic though as such timeout would also
expire in the first request attempt (see #31834), would leave the
request executing after expiration causing memory leaks (see #33342),
and would not take into account the http client internal queuing (see #25951).
Given all these issues, it seems that this custom timeout mechanism
gives little benefits while causing a lot of harm. We should rather rely
on connect and socket timeout exposed by the underlying http client
and accept that a request can overall take longer than the configured
timeout, which is the case even with a single retry anyways.
This commit removes the `maxRetryTimeout` setting and all of its usages.
Instead of logging warnings we now rethrow exceptions thrown inside
scheduled/submitted tasks. This will still log them as warnings in
production but has the added benefit that if they are thrown during
unit/integration test runs, the test will be flagged as an error.
This is a continuation of #38014
Fixed NPE that caused CCR tests (IndexFollowingIT and likely others)
to fail.
schedule could bubble rejected exception to uncaught exception
handler when not using SAME executor if thread pool is terminated.
Now ignore rejected exception silently if executor is shutdown.
Backport PR #38389 for 6.7 produces warnings for rollover test.
This fixes FullClusterRestartIT warning expectations
for rollover request
Relates to #38389
Relax test warning message checking to pre-empt PR 38022 landing in 6.7 with new warning messages.
The relaxed test now just assumes any warning message starting with “[types removal]” is tolerated rather than the precise phrasing used in the 6.7 branch.
We now throw a WarningFailureException instead of ResponseException if
there's any warning in a response. This change leads to the failures of
testSnapshotRestore in the BWC builds for the last two days.
Relates #37247
This PR removes the temporary change we made to the yml test harness in #37285
to automatically set `include_type_name` to `true` in index creation requests
if it's not already specified. This is possible now that the vast majority of
index creation requests were updated to be typeless in #37611. A few additional
tests also needed updating here.
Additionally, this PR updates the test harness to set `include_type_name` to
`false` in index creation requests when communicating with 6.x nodes. This
mirrors the logic added in #37611 to allow for typeless document write requests
in test set-up code. With this update in place, we can remove many references
to `include_type_name: false` from the yml tests.
With #37000 we made sure that fnial reduction is automatically disabled
whenever a localClusterAlias is provided with a SearchRequest.
While working on #37838, we found a scenario where we do need to set a
localClusterAlias yet we would like to perform a final reduction in the
remote cluster: when searching on a single remote cluster.
Relates to #32125
This commit adds support for a separate finalReduce flag to
SearchRequest and makes use of it in TransportSearchAction in case we
are searching against a single remote cluster.
This also makes sure that num_reduce_phases is correct when searching
against a single remote cluster: it makes little sense to return
`num_reduce_phases` set to `2`, which looks especially weird in case
the search was performed against a single remote shard. We should
perform one reduction phase only in this case and `num_reduce_phases`
should reflect that.
* line length
This test failed once because the index wasn't fully ready
(ie, engine opened). This commit changes the test so that
it waits for the index to be green before checking the history
UUID.
Closes#34452
Scheduler.schedule(...) would previously assume that caller handles
exception by calling get() on the returned ScheduledFuture.
schedule() now returns a ScheduledCancellable that no longer gives
access to the exception. Instead, any exception thrown out of a
scheduled Runnable is logged as a warning.
This is a continuation of #28667, #36137 and also fixes#37708.
With #37566 we have introduced the ability to merge multiple search responses into one. That makes it possible to expose a new way of executing cross-cluster search requests, that makes CCS much faster whenever there is network latency between the CCS coordinating node and the remote clusters. The coordinating node can now send a single search request to each remote cluster, which gets reduced by each one of them. from + size results are requested to each cluster, and the reduce phase in each cluster is non final (meaning that buckets are not pruned and pipeline aggs are not executed). The CCS coordinating node performs an additional, final reduction, which produces one search response out of the multiple responses received from the different clusters.
This new execution path will be activated by default for any CCS request unless a scroll is provided or inner hits are requested as part of field collapsing. The search API accepts now a new parameter called ccs_minimize_roundtrips that allows to opt-out of the default behaviour.
Relates to #32125
Today we pass `discovery.zen.minimum_master_nodes` to nodes started up in
tests, but for 7.x nodes this setting is not required as it has no effect.
This commit removes this setting so that nodes are started with more realistic
configurations, and deprecates it.
Doc-value fields now return a value that is based on the mappings rather than
the script implementation by default.
This deprecates the special `use_field_mapping` docvalue format which was added
in #29639 only to ease the transition to 7.x and it is not necessary anymore in
7.0.
This commit restores a noop version of the AllFieldMapper that is instanciated only
for indices created in 6x. We need this metadata field mapper to be present in this version
in order to allow the upgrade of indices that explicitly disable _all (enabled: false).
The mapping of these indices contains a reference to the _all field that we cannot remove
in 7 so we'll need to keep this metadata mapper in 7x. Since indices created in 6x will not
be compatible with 8, we'll remove this noop mapper in the next major version.
Closes#37429
The certgen, certutil and saml-metadata tools did not correctly return
their exit code to the calling shell.
These commands now explicitly exit with the code that was returned
from the main(args, terminal) method.
Added deprecation warnings for use of include_type_name in put/get index templates.
HLRC changes:
GetIndexTemplateRequest has a new client-side class which is a copy of server's GetIndexTemplateResponse but modified to be typeless.
PutIndexTemplateRequest has a new client-side counterpart which doesn't use types in the mappings
Relates to #35190
This commit adds classifiers to the distributions indicating the
OS (for archives) and platform. The current OSes are for windows, darwin (ie
macos) and linux. This change will allow future OS/architecture specific
changes to the distributions. Note the docs using distribution links
have been updated, but will be reworked in a followup to make OS
specific instructions for the archives.
In order to support JSON log format, a custom pattern layout was used and its configuration is enclosed in ESJsonLayout. Users are free to use their own patterns, but if smooth Beats integration is needed, they should use ESJsonLayout. EvilLoggerTests are left intact to make sure user's custom log patterns work fine.
To populate additional fields node.id and cluster.uuid which are not available at start time,
a cluster state update will have to be received and the values passed to log4j pattern converter.
A ClusterStateObserver.Listener is used to receive only one ClusteStateUpdate. Once update is received the nodeId and clusterUUid are set in a static field in a NodeAndClusterIdConverter.
Following fields are expected in JSON log lines: type, tiemstamp, level, component, cluster.name, node.name, node.id, cluster.uuid, message, stacktrace
see ESJsonLayout.java for more details and field descriptions
Docker log4j2 configuration is now almost the same as the one use for ES binary.
The only difference is that docker is using console appenders, whereas ES is using file appenders.
relates: #32850
Jason Tedor
Ryan Ernst
William Brafford
Armin Braun
Alpar Torok
David Turner
Przemyslaw Gomulka
Dimitrios Liappis
Henning Andersen
Andrei Stefan
Mark Vieira
Nhat Nguyen
Ignacio Vera
Zachary Tong
Ryan Ernst
Jim Ferenczi
Ioannis Kakavas
Yannick Welsch
Luca Cavanna
Andrey Ershov
Tanguy Leroux
Christoph Büscher
Julie Tibshirani
Martijn van Groningen
Tim Vernum
Mayya Sharipova
markharwood
David Roberts
Adrien Grand
Jim Ferenczi