Closes#43990. Describe how to change the default GC settings without changing
the default `jvm.options`. Give examples using `jvm.options.d`, and
`ES_JAVA_OPTS` with Docker.
The introductory sections of the reference manual contains some simplified
instructions for adding a node to the cluster. Unfortunately they are a little
too simplified and only really work for clusters running on `localhost`. If you
try and follow these instructions for a distributed cluster then the new node
will, confusingly, auto-bootstrap itself into a distinct one-node cluster.
Multiple nodes running on localhost is a valid config, of course, but we should
spell out that these instructions are really only for experimentation and that
it takes a bit more work to add nodes to a distributed cluster. This commit
does so.
Also, the "important config" instructions for discovery say that you MUST set
`discovery.seed_hosts` whereas in fact it is fine to ignore this setting and
use a dynamic discovery mechanism instead. This commit weakens this statement
and links to the docs for dynamic discovery mechanisms.
Finally, this section is also overloaded with some technical details that are
not important for this context and are adequately covered elsewhere, and
completely fails to note that the default discovery port is 9300. This commit
addresses this.
This commit introduces the ability to override JVM options by adding
custom JVM options files to a jvm.options.d directory. This simplifies
administration of Elasticsearch by not requiring administrators to keep
the root jvm.options file in sync with changes that we make to the root
jvm.options file. Instead, they are not expected to modify this file but
instead supply their own in jvm.options.d. In Docker installations, this
means they can bind mount this directory in. In future versions of
Elasticsearch, we can consider removing the root jvm.options file
(instead, providing all options there as system JVM options).
Backport of #51867.
Tweak the documentation around configuring the heap size when using
Docker, to state that:
- using `ES_JAVA_OPTS` is the preferred method
- Any `ES_JAVA_OPTS` overrides the defaults in `jvm.options`
- It's possible to bind-mount a custom `jvm.options`
* Use standard format for reload settings API
The reload-secure-settings API page was not reorganized for the standard
API format, so this commit is reorganizing the page and adding some
links to the page in related documentation.
* Fix broken links
* Reorder examples to correctly check API response
* Note that only certain settings are reloadable
* [DOCS] Edits layout
* [DOCS] Removes unnecessary callouts
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
Adds a secure and reloadable SECURE_AUTH_PASSWORD setting to allow keystore entries in the form "xpack.monitoring.exporters.*.auth.secure_password" to securely supply passwords for monitoring HTTP exporters. Also deprecates the insecure `AUTH_PASSWORD` setting.
* Reload secure settings with password (#43197)
If a password is not set, we assume an empty string to be
compatible with previous behavior.
Only allow the reload to be broadcast to other nodes if TLS is
enabled for the transport layer.
* Add passphrase support to elasticsearch-keystore (#38498)
This change adds support for keystore passphrases to all subcommands
of the elasticsearch-keystore cli tool and adds a subcommand for
changing the passphrase of an existing keystore.
The work to read the passphrase in Elasticsearch when
loading, which will be addressed in a different PR.
Subcommands of elasticsearch-keystore can handle (open and create)
passphrase protected keystores
When reading a keystore, a user is only prompted for a passphrase
only if the keystore is passphrase protected.
When creating a keystore, a user is allowed (default behavior) to create one with an
empty passphrase
Passphrase can be set to be empty when changing/setting it for an
existing keystore
Relates to: #32691
Supersedes: #37472
* Restore behavior for force parameter (#44847)
Turns out that the behavior of `-f` for the add and add-file sub
commands where it would also forcibly create the keystore if it
didn't exist, was by design - although undocumented.
This change restores that behavior auto-creating a keystore that
is not password protected if the force flag is used. The force
OptionSpec is moved to the BaseKeyStoreCommand as we will presumably
want to maintain the same behavior in any other command that takes
a force option.
* Handle pwd protected keystores in all CLI tools (#45289)
This change ensures that `elasticsearch-setup-passwords` and
`elasticsearch-saml-metadata` can handle a password protected
elasticsearch.keystore.
For setup passwords the user would be prompted to add the
elasticsearch keystore password upon running the tool. There is no
option to pass the password as a parameter as we assume the user is
present in order to enter the desired passwords for the built-in
users.
For saml-metadata, we prompt for the keystore password at all times
even though we'd only need to read something from the keystore when
there is a signing or encryption configuration.
* Modify docs for setup passwords and saml metadata cli (#45797)
Adds a sentence in the documentation of `elasticsearch-setup-passwords`
and `elasticsearch-saml-metadata` to describe that users would be
prompted for the keystore's password when running these CLI tools,
when the keystore is password protected.
Co-Authored-By: Lisa Cawley <lcawley@elastic.co>
* Elasticsearch keystore passphrase for startup scripts (#44775)
This commit allows a user to provide a keystore password on Elasticsearch
startup, but only prompts when the keystore exists and is encrypted.
The entrypoint in Java code is standard input. When the Bootstrap class is
checking for secure keystore settings, it checks whether or not the keystore
is encrypted. If so, we read one line from standard input and use this as the
password. For simplicity's sake, we allow a maximum passphrase length of 128
characters. (This is an arbitrary limit and could be increased or eliminated.
It is also enforced in the keystore tools, so that a user can't create a
password that's too long to enter at startup.)
In order to provide a password on standard input, we have to account for four
different ways of starting Elasticsearch: the bash startup script, the Windows
batch startup script, systemd startup, and docker startup. We use wrapper
scripts to reduce systemd and docker to the bash case: in both cases, a
wrapper script can read a passphrase from the filesystem and pass it to the
bash script.
In order to simplify testing the need for a passphrase, I have added a
has-passwd command to the keystore tool. This command can run silently, and
exit with status 0 when the keystore has a password. It exits with status 1 if
the keystore doesn't exist or exists and is unencrypted.
A good deal of the code-change in this commit has to do with refactoring
packaging tests to cleanly use the same tests for both the "archive" and the
"package" cases. This required not only moving tests around, but also adding
some convenience methods for an abstraction layer over distribution-specific
commands.
* Adjust docs for password protected keystore (#45054)
This commit adds relevant parts in the elasticsearch-keystore
sub-commands reference docs and in the reload secure settings API
doc.
* Fix failing Keystore Passphrase test for feature branch (#50154)
One problem with the passphrase-from-file tests, as written, is that
they would leave a SystemD environment variable set when they failed,
and this setting would cause elasticsearch startup to fail for other
tests as well. By using a try-finally, I hope that these tests will fail
more gracefully.
It appears that our Fedora and Ubuntu environments may be configured to
store journald information under /var rather than under /run, so that it
will persist between boots. Our destructive tests that read from the
journal need to account for this in order to avoid trying to limit the
output we check in tests.
* Run keystore management tests on docker distros (#50610)
* Add Docker handling to PackagingTestCase
Keystore tests need to be able to run in the Docker case. We can do this
by using a DockerShell instead of a plain Shell when Docker is running.
* Improve ES startup check for docker
Previously we were checking truncated output for the packaged JDK as
an indication that Elasticsearch had started. With new preliminary
password checks, we might get a false positive from ES keystore
commands, so we have to check specifically that the Elasticsearch
class from the Bootstrap package is what's running.
* Test password-protected keystore with Docker (#50803)
This commit adds two tests for the case where we mount a
password-protected keystore into a Docker container and provide a
password via a Docker environment variable.
We also fix a logging bug where we were logging the identifier for an
array of strings rather than the contents of that array.
* Add documentation for keystore startup prompting (#50821)
When a keystore is password-protected, Elasticsearch will prompt at
startup. This commit adds documentation for this prompt for the archive,
systemd, and Docker cases.
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
* Warn when unable to upgrade keystore on debian (#51011)
For Red Hat RPM upgrades, we warn if we can't upgrade the keystore. This
commit brings the same logic to the code for Debian packages. See the
posttrans file for gets executed for RPMs.
* Restore handling of string input
Adds tests that were mistakenly removed. One of these tests proved
we were not handling the the stdin (-x) option correctly when no
input was added. This commit restores the original approach of
reading stdin one char at a time until there is no more (-1, \r, \n)
instead of using readline() that might return null
* Apply spotless reformatting
* Use '--since' flag to get recent journal messages
When we get Elasticsearch logs from journald, we want to fetch only log
messages from the last run. There are two reasons for this. First, if
there are many logs, we might get a string that's too large for our
utility methods. Second, when we're looking for a specific message or
error, we almost certainly want to look only at messages from the last
execution.
Previously, we've been trying to do this by clearing out the physical
files under the journald process. But there seems to be some contention
over these directories: if journald writes a log file in between when
our deletion command deletes the file and when it deletes the log
directory, the deletion will fail.
It seems to me that we might be able to use journald's "--since" flag to
retrieve only log messages from the last run, and that this might be
less likely to fail due to race conditions in file deletion.
Unfortunately, it looks as if the "--since" flag has a granularity of
one-second. I've added a two-second sleep to make sure that there's a
sufficient gap between the test that will read from journald and the
test before it.
* Use new journald wrapper pattern
* Update version added in secure settings request
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
Co-authored-by: Ioannis Kakavas <ikakavas@protonmail.com>
Docker bypasses the Uncomplicated Firewall (UFW) on Linux by editing the `iptables` config directly, which leads to the exposure of port 9200, even if you blocked it via UFW.
This adds a warning along with work-arounds to the docs.
Signed-off-by: Kovah <mail@kovah.de>
This commit changes the recommended repository file for rpm based
systems to be disabled by default. This is a safer practice so upgrades
of the system do no accidentally upgrade elasticsearch itself.
closes#30660
This commit clarifies how to override JAVA_HOME from the bundled jdk for
deb and rpm installs, which each have their own file that is sourced
upon service startup.
closes#49068
Fix reference about the uid:gid that Elasticsearch runs as inside
the Docker container and add a packaging test to ensure that bind
mounting a data dir with a random uid and gid:0 works as
expected.
Backport of #49529Closes#47929
Backport of #47573.
Closes#43603. Allow environment variables to be passed to ES in a Docker
container via a file, by setting an environment variable with the `_FILE`
suffix that points to the file with the intended value of the env var.
Clarifies not to set `cluster.initial_master_nodes` on nodes that are joining
an existing cluster.
Co-Authored-By: James Rodewig <james.rodewig@elastic.co>
this field can be present in search slow logs and deprecation logs. The
docs describes how to enable this functionality and what expect in logs.
closes#44851
Removes the suggestion to use IP addresses for `cluster.initial_master_nodes`
in the "important settings" discovery docs, leaving only the suggestion to use
node names.
Relates #41179, #41569
This commit tweaks the docs for secure settings to ensure the user is
aware adding non secure settings to the keystore will result in
elasticsearch not starting.
fixes#43328
Co-Authored-By: James Rodewig <james.rodewig@elastic.co>
Leaf-Lin
Rory Hunter
David Turner
Nik Richers
Jason Tedor
William Brafford
Dan Hermann
Lisa Cawley
Nik Everett
Kevin Woblick
Ryan Ernst
Xiang Dai
glerb
Dimitrios Liappis
István Zoltán Szabó
Arne Welzel
debadair
Przemyslaw Gomulka
AndyHunt66
James Rodewig
David Turner
Ryan Ernst
Travis Steel
David Roberts