This gets the tar and tar_plugins tests working in gradle. It does so by
adding a subproject, qa/vagrant, which adds the following tasks:
Verification
------------
checkPackages - Check the packages against a representative sample of the
linux distributions we have in our Vagrantfile
checkPackagesAllDistros - Check the packages against all the linux
distributions we have in our Vagrantfile
Package Verification
--------------------
checkCentos6 - Run packaging tests against centos-6
checkCentos7 - Run packaging tests against centos-7
checkDebian8 - Run packaging tests against debian-8
checkFedora22 - Run packaging tests against fedora-22
checkOel7 - Run packaging tests against oel-7
checkOpensuse13 - Run packaging tests against opensuse-13
checkSles12 - Run packaging tests against sles-12
checkUbuntu1204 - Run packaging tests against ubuntu-1204
checkUbuntu1404 - Run packaging tests against ubuntu-1404
checkUbuntu1504 - Run packaging tests against ubuntu-1504
Vagrant
-------
smokeTestCentos6 - Smoke test the centos-6 VM
smokeTestCentos7 - Smoke test the centos-7 VM
smokeTestDebian8 - Smoke test the debian-8 VM
smokeTestFedora22 - Smoke test the fedora-22 VM
smokeTestOel7 - Smoke test the oel-7 VM
smokeTestOpensuse13 - Smoke test the opensuse-13 VM
smokeTestSles12 - Smoke test the sles-12 VM
smokeTestUbuntu1204 - Smoke test the ubuntu-1204 VM
smokeTestUbuntu1404 - Smoke test the ubuntu-1404 VM
smokeTestUbuntu1504 - Smoke test the ubuntu-1504 VM
vagrantHaltCentos6 - Shutdown the vagrant VM running centos-6
vagrantHaltCentos7 - Shutdown the vagrant VM running centos-7
vagrantHaltDebian8 - Shutdown the vagrant VM running debian-8
vagrantHaltFedora22 - Shutdown the vagrant VM running fedora-22
vagrantHaltOel7 - Shutdown the vagrant VM running oel-7
vagrantHaltOpensuse13 - Shutdown the vagrant VM running opensuse-13
vagrantHaltSles12 - Shutdown the vagrant VM running sles-12
vagrantHaltUbuntu1204 - Shutdown the vagrant VM running ubuntu-1204
vagrantHaltUbuntu1404 - Shutdown the vagrant VM running ubuntu-1404
vagrantHaltUbuntu1504 - Shutdown the vagrant VM running ubuntu-1504
vagrantSmokeTest - Smoke test some representative distros from the Vagrantfile
vagrantSmokeTestAllDistros - Smoke test all distros from the Vagrantfile
vagrantUpCentos6 - Startup a vagrant VM running centos-6
vagrantUpCentos7 - Startup a vagrant VM running centos-7
vagrantUpDebian8 - Startup a vagrant VM running debian-8
vagrantUpFedora22 - Startup a vagrant VM running fedora-22
vagrantUpOel7 - Startup a vagrant VM running oel-7
vagrantUpOpensuse13 - Startup a vagrant VM running opensuse-13
vagrantUpSles12 - Startup a vagrant VM running sles-12
vagrantUpUbuntu1204 - Startup a vagrant VM running ubuntu-1204
vagrantUpUbuntu1404 - Startup a vagrant VM running ubuntu-1404
vagrantUpUbuntu1504 - Startup a vagrant VM running ubuntu-1504
It does not make the "check" task depend on "checkPackages" so running the
vagrant tests is still optional. They are slow and depend on vagrant and
virtualbox.
The Package Verification tasks are useful for testing individual distros.
The Vagrant tasks are listed in `gradle tasks` primarily for discoverability.
This change removes the leftover pom files. A couple files were left for
reference, namely in qa tests that have not yet been migrated (vagrant
and multinode). The deb and rpm assemblies also still exist for
reference when finishing their setup in gradle.
See #13930
There are three ways `@Test` was used. Way one:
```java
@Test
public void flubTheBlort() {
```
This way was always replaced with:
```java
public void testFlubTheBlort() {
```
Or, maybe with a better method name if I was feeling generous.
Way two:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
methodThatThrows();
}
```
This way of using `@Test` is actually pretty OK, but to get the tools to ban
`@Test` entirely it can't be used. Instead:
```java
public void testFoo() {
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
This is longer but tests more than the old ways and is much more precise.
Compare:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
methodThatThrows();
code(); // <---- This was left here by mistake and is never called
}
```
to:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
The final use of test is:
```java
@Test(timeout=1000)
public void testFoo() {
methodThatWasSlow();
}
```
This is the most insidious use of `@Test` because its tempting but tragically
flawed. Its flaws are:
1. Hard and fast timeouts can look like they are asserting that something is
faster and even do an ok job of it when you compare the timings on the same
machine but as soon as you take them to another machine they start to be
invalid. On a slow VM both the new and old methods fail. On a super-fast
machine the slower and faster ways succeed.
2. Tests often contain slow `assert` calls so the performance of tests isn't
sure to predict the performance of non-test code.
3. These timeouts are rude to debuggers because the test just drops out from
under it after the timeout.
Confusingly, timeouts are useful in tests because it'd be rude for a broken
test to cause CI to abort the whole build after it hits a global timeout. But
those timeouts should be very very long "backstop" timeouts and aren't useful
assertions about speed.
For all its flaws `@Test(timeout=1000)` doesn't have a good replacement __in__
__tests__. Nightly benchmarks like http://benchmarks.elasticsearch.org/ are
useful here because they run on the same machine but they aren't quick to check
and it takes lots of time to figure out the regressions. Sometimes its useful
to compare dueling implementations but that requires keeping both
implementations around. All and all we don't have a satisfactory answer to the
question "what do you replace `@Test(timeout=1000)`" with. So we handle each
occurrence on a case by case basis.
For files with `@Test` this also:
1. Removes excess blank lines. They don't help anything.
2. Removes underscores from method names. Those would fail any code style
checks we ever care to run and don't add to readability. Since I did this manually
I didn't do it consistently.
3. Make sure all test method names start with `test`. Some used to end in `Test` or start
with `verify` or `check` and they were picked up using the annotation. Without the
annotation they always need to start with `test`.
4. Organizes imports using the rules we generate for Eclipse. For the most part
this just removes `*` imports which is a win all on its own. It was "required"
to quickly remove `@Test`.
5. Removes unneeded casts. This is just a setting I have enabled in Eclipse and
forgot to turn off before I did this work. It probably isn't hurting anything.
6. Removes trailing whitespace. Again, another Eclipse setting I forgot to turn
off that doesn't hurt anything. Hopefully.
7. Swaps some tests override superclass tests to make them empty with
`assumeTrue` so that the reasoning for the skips is logged in the test run and
it doesn't "look like" that thing is being tested when it isn't.
8. Adds an oxford comma to an error message.
The total test count doesn't change. I know. I counted.
```bash
git checkout master && mvn clean && mvn install | tee with_test
git no_test_annotation master && mvn clean && mvn install | tee not_test
grep 'Tests summary' with_test > with_test_summary
grep 'Tests summary' not_test > not_test_summary
diff with_test_summary not_test_summary
```
These differ somewhat because some tests are skipped based on the random seed.
The total shouldn't differ. But it does!
```
1c1
< [INFO] Tests summary: 564 suites (1 ignored), 3171 tests, 31 ignored (31 assumptions)
---
> [INFO] Tests summary: 564 suites (1 ignored), 3167 tests, 17 ignored (17 assumptions)
```
These are the core unit tests. So we dig further:
```bash
cat with_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > with_test_suites
cat not_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > not_test_suites
diff <(sort with_test_suites) <(sort not_test_suites)
```
The four tests with lower test numbers are all extend `AbstractQueryTestCase`
and all have a method that looks like this:
```java
@Override
public void testToQuery() throws IOException {
assumeTrue("test runs only when at least a type is registered", getCurrentTypes().length > 0);
super.testToQuery();
}
```
It looks like this method was being double counted on master and isn't anymore.
Closes#14028
This commit makes sure that the plugin script looks at user, group and permissions of the elasticsearch bin dir and copies them over to the plugin bin subdirectory, whatever they are, so that they get properly setup depending on how elasticsearch was installed. We also make sure that execute permissions are added for files (we already did this before).
Relates to #11016Closes#14088
Depending on how elasticsearch is installed, we have two scenarios to take into account that relate to user, group and permissions assigned to the config directory:
1) deb/rpm package: /etc/elasticsearch is root:elasticsearch 750 and the plugin script is run from root user
2) tar/zip archive: es config dir is most likely elasticsearch:elasticsearch and the plugin script is most likely run from elasticsearch user
When the plugin script copies over the plugin config dir within the es config dir, it should take care of setting the proper user, group and permissions, which vary depending on how elasticsearch was installed in the first place. Should be root:elasticsearch 750 if installed from a package, or elasticsearch:elasticsearch if installed from an archive.
This commit makes sure that the plugin script looks at user, group and permissions of the config dir and copies them over to the plugin config subdirectory, whatever they are, so that they get properly setup depending on how elasticsearch was installed in the first place. We also make sure that execute permissions are left untouched for files.
Relates to #11016Closes#14048
When generating the rpm and dep package we now set proper group (elasticsearch) and permissions (750) to the conf dir (default /etc/elasticsearch). Same for the scripts subdirectory.
Expanded the assert_file bash function to also optionally check the group of files, so we can actually test that the group was set correctly.
Relates to #11016Closes#14017
It is rarely used and was not consistently handled by different distributions anyway.
This commit also adds a test for specifying CONF_DIR when installing plugins and
starting elasticsearch.
relates to #12712 and #12954closes#5329closes#13715
package installation creates the plugin directory already so when a plugin
is installed it prints the additional line
Plugins directory [/tmp/elasticsearch/plugins] does not exist. Creating...
Plugin cli tools configures logging with whatever is in the logging.yml.
If a file appender is configured for any of the logs this will cause creation
of an empty log file. If a plugin was for example installed as root it will
create empty logs at es.home/logs.
This is problematic when for example plugins are installed as root and es is run
as service. Logs will then be created in /usr/share/elasticsearch/logs
and can later not be removed by for example dpkg -r or -purge.
To avoid this, configure the logger to use an appender that writes to the same
output that plugin cli tool does. This allows other components that are called
from Plugin cli tool to write to the same terminal that plugin cli tool writes to
by using the logging mechanism already in place.
The logging conf is not read at all pb plugin cli tool.
As a side effect, the loging level for components that are called
from the plugin command such as the jar hell check can now be configured
with -Des.logger.level which makes it easier to debug the jar hell check.
Installs javatana in vivid, emulates its on-login actions when starting
elasticsearch and verifies that elasticsearch turns off javatana.
Relates to #13813
Before this commit he tests always run bin/plugin as root which is somewhat
unrealistic and causes trouble (log files owned by root instead of
elasticsearch). After this commit `bin/plugin` runs as root when elasticsearch
is installed via the repository and as elasticsearch otherwise which is much
more realistic.
This also adds extra timeout to starting elasticsearch which is required
when all the plugins are installed. And it fixes up a problem with logging
elasticsearch's log if elasticsearch doesn't start which came up multiple
time while debugging this problem.
Also adds docs recommending running `bin/plugin` as the user that owns the
Elasticsearch files or root if installed with the packages.
Closes#13557
This adds SuSe Linux Enterprise Server 12 to the list of tested VMs.
SLES 12 is using systemd, so that the current RPM works
out of the box.
SLES12 however is already quite old and does not ship with java8, so this
required adding an opensuse repo.
Fix the vagrant tests after azure was split into 3 plugins. The tests
need to list all the plugins and some dependency so we can make sure the
plugin can be installed and uninstalled.
Until now we had a cloud-azure plugin which is providing 3 distinct features:
* discovery on Azure
* snapshot/restore on Aure
* SMB store
This commit splits the plugin by feature so people can use either one or the other or both features.
Doc is updated accordingly.
Right now we execute some debian-isms in the init.d tests. This switches to
trying both the debian and centos ways to stop services from starting
automatically.
The AWS plugin was broken into discovery-ec2 and repository-s3 so we can't
test the old plugin and must test the new ones.
Fixed some wording issues in test names.
This changes the packaging tests to start Elasticsearch with all plugins
installed and checks `_cat/plugins?h=c` against the list of plugins in
the plugins directory. If the list differs, error! So it proves that the
plugins can be installed using bin/plugin as shipped in the rpm and deb
packages.
Closes#13254
There are two other obvious ways to implement the "packages don't start
elasticsearch" checks but when you work through them they aren't as nice
as the implementation of the checks that we use now. This just adds
documentation to that effect.
Nik Everett
Robert Muir
Ryan Ernst
javanna
Jason Tedor
David Pilato
Britta Weber
Britta Weber
Alexander Reelsen
André Carvalho