The HTTPClient in watcher always appended a question mark at the end of
an URL, regardless if parameters were used or not. This commit adds a
check to only pass valid parameters to the URI construction.
Original commit: elastic/x-pack-elasticsearch@184f8f441c
When running SQL REST queries, a client can ask (through Accept header) for
the data to be returned in CSV or TSV format in addition to plain text,
json & co.
Original commit: elastic/x-pack-elasticsearch@12d87b3033
In order to deal with the most anticipated scenario, when datafeed
frequency is greater than the query_delay, we add the query_delay
to the frequency in order to determine the next time we will trigger
a real-time run. For example, if frequency is 10s and query_delay 1s,
we make sure to trigger the real-time run at a 10s + 1s = 11s offset.
However, this is not correct in the case the frequency is less or
equal to the query_delay. For example, if frequency is 1s and
query_delay is 10s. we would also end up triggering at 11s offset.
But the right behaviour would be to trigger every second while
ensuring we are searching for up to 10seconds ago.
This commit fixes this issue.
relates elastic/x-pack-elasticsearch#4167
Original commit: elastic/x-pack-elasticsearch@f605885167
If a user specifies an 'Authorization' header in an HTTPRequest we,
which might be needed instead of using HTTP Basic Auth due to using
Bearer Authentication, then in case of an failure, the request gets
logged including that Authorization header.
In addition, each implementation of a sent message for jira/hipchat/slack filters
out special fields when a HTTP request is written in case of a failed
response in order to not leak secret data.
Relates elastic/x-pack-elasticsearch#3800
Original commit: elastic/x-pack-elasticsearch@66efdd9b36
This change disables security for trial licenses unless security is
explicitly enabled in the settings. This is done to facilitate users
getting started and not having to deal with some of the complexities
involved in getting security configured. In order to do this and avoid
disabling security for existing users that have gold or platinum
licenses, we have to disable security after cluster formation so that
the license can be retrieved.
relates elastic/x-pack-elasticsearch#4078
Original commit: elastic/x-pack-elasticsearch@96bdb889fc
This commit moves the dev key into core and renames to make it clear it
is for snapshots, and makes the production key a required parameter of
release builds.
Original commit: elastic/x-pack-elasticsearch@ea299bd5a2
Changes are done in SetupPasswordTool to load the keystore
and set security settings to load password protected keys in SSL configuration.
Check for the verification mode and appropriately use hostname verifier.
Close the keystore after setup-password is complete.
Unit test for CommandLineHttpClient
TODO: TLS documentation needs to be fixed, which will be taken up as a separate
fix due to documentation refactoring in progress.
relates elastic/x-pack-elasticsearch#3760
Original commit: elastic/x-pack-elasticsearch@72e8666e21
Aggregations may return `NaN`, and the comparison code would return `true` if this result was passed to a `gte` or `lte` condition.
Original commit: elastic/x-pack-elasticsearch@3b16ae6675
SAML is only available on a Platinum license. If you try and use SAML
on a Gold license, then the error message is misleading - it gives the
equivalent of "cannot find saml realm".
This change adds a standard license error of
"current license is non-compliant for [saml]"
if SAML rest actions are used when SAML is not licensed.
Original commit: elastic/x-pack-elasticsearch@7c0e26d58e
Trying to setup passwords on a red cluster (or a cluster that cannot
reach a quorum) is generally not a good idea.
This commit:
- Adds a check for RED cluster status
- Prompts to confirm execution if the cluster is red
- Prints out the reason/type is an error response is received
- Increases the HTTP read timeout so that master election failures are
reported correctly.
Original commit: elastic/x-pack-elasticsearch@4ffbda23db
This creates a new "beats_system" user and role with the same
privileges as the existing "logstash_system" user/role.
The "beat_system" user is also added as a managed user within
the "setup-passwords" command.
Users who upgrade from an earlier version of Elasticsearch/X-Pack
will need to manually set a password for the beats_system user via
the change password API (or Kibana UI)
Original commit: elastic/x-pack-elasticsearch@6087d3a18e
If a watch is not active, it should still be executed, if it is called
via the execute watch API.
This commit adds an additional method to the execution context to check
for this, which returns true for a manual execution context but checks
the watch status for the triggered one.
Original commit: elastic/x-pack-elasticsearch@18f3f9e84b
This commit fixes the Javadoc build for MonitoringTemplateUtils after
changes to core removed the string and bytes methods from
XContentBuilder.
Original commit: elastic/x-pack-elasticsearch@49f3b95b22
This ensures that the per watch stats in the trigger service are
properly cleared, when execution is paused.
Original commit: elastic/x-pack-elasticsearch@f5119e4072
Add realm name to all authz audit events: accessDenied, accessGranted,
runAsDenied and runAsGranted.
These event types receive the following attributes: realm,
run_by_realm and run_as_realm to go along with with the existing
attributes: principal, run_by_principal and run_as_principal. The
'effective realm name' (run_as_realm or run_by_realm) is certainly
filterable by ignore policies.
Original commit: elastic/x-pack-elasticsearch@cb3801e197
Audit trail filter policies can now be updated by the cluster update
settings API. Previously, policies were static inside the conf file.
This is helpful because, in practice, coming up with a reasonable
policy set is an iterative process, adding and changing policies to
shave off yet another pesky audit event.
Original commit: elastic/x-pack-elasticsearch@e8a670c427
This commit adds a Samba4 test fixture that acts as a domain controller
and has the same contents as the cloud active directory instance that
we previously used for tests.
The tests also support reading information from environment variables
so that they can be run against a real active directory instance in our
CI builds.
In addition, this commit also fixes a few issues that surfaced when
making this change. The first is a change in the base DN that is
searched when performing down-level authentication. The base DN is
now the configuration object instead of the domain DN. This change was
required due to the original producing unnecessary referrals, which we
cannot easily follow when running against this test figure. Referrals
cannot easily be followed as they are returned by the ldap server with
an unresolvable DNS name unless the host points to the samba4 instance
for DNS. The port returned in the referral url is the one samba is bound
to, which differs from the port that is forwarded to the host by the
test fixture.
The other issue that is resolved by this change is the addition of
settings that allow specifying non-standard ports for active directory.
This is needed for down-level authentication as we may need to query
the regular port of active directory instead of the global catalog
port as the configuration object is not replicated to the global
catalog.
relates elastic/x-pack-elasticsearch#185
Relates elastic/x-pack-elasticsearch#3800
Original commit: elastic/x-pack-elasticsearch@883c742fba
This stops providing the "hkey" (hash) of the license now that the
Monitoring UI no longer uses it (6.3+).
Original commit: elastic/x-pack-elasticsearch@235402fa92
This adds an indicator to Monitoring's portion of X-Pack usage whether or
not collection is actually enabled. It's no longer enough to have an
exporter defined by default to know if monitoring is actually running.
Original commit: elastic/x-pack-elasticsearch@b2eb881d61
This adds a minimum compatible version to the model snapshot.
Nodes with a version earlier than that version cannot read
that model snapshot. Thus, such jobs are not assigned to
incompatible nodes.
relates elastic/x-pack-elasticsearch#4077
Original commit: elastic/x-pack-elasticsearch@2ffa6adce0
This adds back usage stats by pickybacking on the watcher stats, which
are already running distributed in order to collect and merge watcher
statistics.
In order to be able to track statistics, we need to add information for
each watch in an in-memory data structure that is processed whenever a
usage request is coming in. This processing creates a number of counters
for each node, which then are merged together in the usage stats.
relates elastic/x-pack-elasticsearch#4071
Original commit: elastic/x-pack-elasticsearch@c8bfed288f
The toXContent serialization of the transform input was broken, which
could lead to the bad case that a watch could be stored with an invalid
toXContent serialization, that could not be read again, when the watch
should either be executed or even just returned by the Get watch API.
relates elastic/x-pack-elasticsearch#4049
Original commit: elastic/x-pack-elasticsearch@f06ad768b8
`PrintWriter#println` doesn't pay attention to the terminal
configuration that we specify so it breaks tests on Windows. If we
instead always use `PrintWriter#print('\n')` then the tests work
properly on windows *and* the CLI actually works properly on Windows.
relates elastic/x-pack-elasticsearch#4109
Original commit: elastic/x-pack-elasticsearch@ac17e691c8
* Decouple XContentBuilder from BytesReference
This commit handles the removal of all mentions of BytesReference from
XContentBuilder. This is needed so that we can completely decouple the XContent
code and move it into its own dependency.
This is the x-pack side of https://github.com/elastic/elasticsearch/pull/28972
Original commit: elastic/x-pack-elasticsearch@8ba2e97b26
This commit adjusts the invocation of the main response constructor as
these were changed upstream to remove a parameter.
Original commit: elastic/x-pack-elasticsearch@846b33c9e9
This is related to elastic/x-pack-elasticsearch#3877. This commit adds a paramer type to the
start_trial api. This parameter allows the user to pass a type (trial,
gold, or platinum) of license that will be generated. No matter what
type is choosen, you can only generate one per major version.
Original commit: elastic/x-pack-elasticsearch@b42234cbb5
This removes the check for 'requires_keystore' from the plugin output,
which was removed unexpectedly to this test.
Original commit: elastic/x-pack-elasticsearch@80c5c03e20
This commit replaces the usage of Lucene IOUtils with Elasticsearch
IOUtils, the former of which is now forbidden.
Original commit: elastic/x-pack-elasticsearch@8e0554001f
The SQL CLI was being a bit cavalier about `null`, `ctrl-c`, and
`ctrl-d` while reading passwords to the point where it'd halt with
an exception if the user hit `ctrl-d` while typing a password. This
changes it so that the CLI will instead shut down if the user
`ctrl-c`s or `ctrl-d`s while on the password prompt with an
ENOPERM error code.
This also fixes a packaging test failure I caused by a copy and paste
error where the CLI was always enforcing things as though it was reading
a password all the time. This error was causing packaging test failures.
Original commit: elastic/x-pack-elasticsearch@a882c50fc7
This is related to elastic/x-pack-elasticsearch#3877. This commit adds a route /start_basic that
will self generate a basic license. The only validation that is
performed is to check that you do not already have a basic license
installed. Additionally, if you lose features from switching to a basic
license, you must acknowledge the changes.
Original commit: elastic/x-pack-elasticsearch@7b8eeb50b1
This commit adapts the X-Pack packaging tests to the change in
Elasticsearch to create the keystore on package installation.
Original commit: elastic/x-pack-elasticsearch@e86c98fa83
A small bug in the `IndexStatsCollector` can potentially returns
statistics for newly created indices that does not exist yet in the
collector's `ClusterState` local instance.
It happens because an instance of the current `ClusterState` is
captured and passed to all the collectors before they are executed (so
that they all share the same view of the state of the cluster). On
some clusters, if an index is created after the `ClusterState` is
captured but before the `IndicesStatsRequest` is executed then it can
appears in the index stats but have no corresponding entry in the
local cluster state.
This commit changes the IndexStatsCollector so that it only return
statistics for indices that already exist in the cluster state. This
way a consistent view is possible between indices/index/shard stats.
Original commit: elastic/x-pack-elasticsearch@da173ae0b0
SslConfiguration can depend on SecureSettings, so it must be
constructed during the correct lifecycle phase.
For PkiRealmBootstrapCheck, moved the construction of SslConfiguration
objets into the constructor rather than the check method
Original commit: elastic/x-pack-elasticsearch@1a4d147216
This is related to elastic/x-pack-elasticsearch#4095. That test uses the a basic license in a test
of the route put license. Occasionally, that license is extended due to
recent work related to indefinite basic licenses before the test
assertions can be performed. This commit changes the test to use a gold
license.
Original commit: elastic/x-pack-elasticsearch@bf2550f044
This is related to elastic/x-pack-elasticsearch#3877. It modifies self-generated basic licenses to
(practically) never expire. Specifically, self-generated basic licenses
will be set with an expiration date 1 year before Long.MAX_VALUE
Additionally, basic licenses with a different expiration date will be
replaced with a new self-generated basic licenses at startup.
Original commit: elastic/x-pack-elasticsearch@de8b343089
If the Assertion Consumer Service URL already contained query
parameters, we would incorrectly append an addtional '?' rather than
adding the SAML parameters to the end with '&'
Original commit: elastic/x-pack-elasticsearch@60b6a977d8
This properly registers the `XPackFeatureSetUsage` for Logstash and
it tests it by invoking the Usage API in a Monitoring QA test.
Without those being properly registered, the test will consistently fail.
Original commit: elastic/x-pack-elasticsearch@2e8f2376fd
We had a Usage class before, but weren't registering it with XPack.
Would be nice to add more usage info in the future (like the running
jobs on each node), but unclear the best way to do it since we'd need
to filter through the list of allocated tasks.
Original commit: elastic/x-pack-elasticsearch@5207d2758b
Up to now a job update that reduces the model memory limit
was not allowed. However, there could definitely be cases
where reducing the limit is necessary and reasonable.
This commit makes it possible to decrease the limit as long
as it does not go below the current memory usage. We obtain
the latter from the model size stats.
The conditions under which updating the model_memory_limit
is not allowed are now:
- when the job is open
- latest model_size_stats.model_bytes < new value
relates elastic/x-pack-elasticsearch#2461
Original commit: elastic/x-pack-elasticsearch@5b35923590
This removes the readFrom and writeTo methods from XContentType, instead using
the more generic `readEnum` and `writeEnum` methods. Luckily they are both
encoded exactly the same way, so there is no compatibility layer needed for
backwards compatibility.
This is the x-pack side of https://github.com/elastic/elasticsearch/pull/28927
Original commit: elastic/x-pack-elasticsearch@f1c0928490
This commit fixes the Javadocs for the class o.e.x.r.j.RollupIndexer as
these Javadocs were referring to instance methods on the class
incorrectly (using a this prefix).
Original commit: elastic/x-pack-elasticsearch@fdcc7338f9
This wraps the stream (`.streamInput()`) that is passed to many of the
`createParser` instances in the enclosing (or a new) try-with-resources block.
This ensures the `BytesReference.streamInput()` is closed.
Relates to elastic/x-pack-elasticsearch#28504
Original commit: elastic/x-pack-elasticsearch@7546e3b4d4
This moves the `payload = null;` statement to above the asynchronous
HTTP call. This helps to avoid a race condition relative to `doClose`
asserting that it is `null`.
This is only a realistic situation during a shutdown situation because
the thread responds immediately before it can be nullified and freeable,
which is not a realistic scenario in any other situation.
Original commit: elastic/x-pack-elasticsearch@eb3a6ff118
Remove functions without a backing matrix agg
MatrixAgg works across multiple fields and exposing it directly in SQL
does not work. Instead isolated functions are exposed which get folded
and optimized into one matrix agg per field. Thus not all matrix
functions can be exposed in SQL, at least at this time.
Instead of depending on the plugin directly, depend on the plugin client
jar (matrix-agg-client)
Remove outdated test
Original commit: elastic/x-pack-elasticsearch@ec9b31bf59
The type of BUFFER_LENGTH needs to be an integer (not NULL) and unsigned
indicate the opposite of signed.
Change isSigned from Object to primitive
Since all the consumer of isSigned expect a primitive, an Object is just causing troubles by being null.
Update description table
Original commit: elastic/x-pack-elasticsearch@8e1960bdb5
Use AggregatorTestCase's `newIndexSearcher()` instead. Lucene's
version can randomly wrap with IndexReader with things we can't handle
like ParallelCompositeReader
Original commit: elastic/x-pack-elasticsearch@b4c0e9a601
The test job helper randomizes the index name with 1-10 characters,
which can lead to randomized index names to overlap and show fewer
caps than the test expects.
The solution is to just use index names "0"-"24" to ensure none
of the names overlap, and thus the caps don't overlap.
Original commit: elastic/x-pack-elasticsearch@74a6d13213
The arrangement of the final latch meant the latch could countdown,
then the test ends before the await() triggers which caused the
thread to be interrupted and fail. The whole arrangement was incorrect
anyhow.
We need to await the latch before sending the search response as before,
but move the final atomicBoolean to the second time the persistent
task status is updated which is a signal that we are done
and can end the test
If these tests continues to be flaky, we should probably just remove them.
The headers are tested elsewhere and not required to be tested in this
context.
Original commit: elastic/x-pack-elasticsearch@0cf5603972
Analysis limits contain settings that affect the resources
used by ML jobs. Those limits always take place. However,
explictly setting them is not required as they have reasonable
defaults. For a long time those defaults lived on the c++ side.
The job could just not have any explicit limits and that meant
defaults would be used at the c++ side. This has the disadvantage
that it is not obvious to the users what these settings are set to.
Additionally, users might not be aware of the settings existence.
On top of that, since 6.1, the default model_memory_limit was lowered
from 4GB to 1GB. For BWC, this meant that jobs where model_memory_limit
is null, the default of 4GB applies. Jobs that were created from 6.1
onwards, contain an explicit setting for model_memory_limit, which is
1GB unless the user sets it differently. This adds additional confusion.
This commit makes analysis limits an always explicit setting on the job.
Regardless of whether the user sets custom limits or not, the job object
(and response) will contain the full analysis limits values.
The possibilities for interpretation of missing values are:
- the entire analysis_limits is null: this may only happen for jobs
created prior to 6.1. Thus we set the model_memory_limit to 4GB.
- analysis_limits are non-null but model_memory_limit is: this also
may only happen for jobs prior to 6.1. Again, we set memory limit to
4GB.
- model_memory_limit is non-null: this either means the user set an
explicit value or the job was created from 6.1 onwards and it has
the explicit default of 1GB. We simply keep the given value.
For categorization_examples_limit the default has always been 4, so
we fill that in when it's missing.
Finally, note that we still need to handle potential null values
for the situation of a mixed cluster.
Original commit: elastic/x-pack-elasticsearch@5b6994ef75
I'm really really sad to be removing the cli-fixture but I've had
trouble with it leaking recently it is pretty slow. Beyond that, we'd
prefer that our test fixture only fixture things that are external
depndencies.
So, yeah, I'm removing it. So we get faster tests and no chance of
leaking processes. We lose some "realness" in the tests. Instead of
interacting with the CLI like a real user we embed it in the test
process. That means we don't test the forking, we don't test the
executable jar, and we don't test the jLine console detection stuff. On
the other hand we were kind of forcing the jLine console detection stuff
in a funky way with the fixture anyway. And we test the executable jar
in the packaging tests. And that'll have to do.
I haven't renamed `RemoteCli` because it'd bloat this commit with
mechanical changes that'd make it hard to review. I'll rename it in a
followup commit.
This also updates jLine so we can disable blinking to matching
parentheses during testing. I have no clue why, but this wasn't
happening when we used the fixture. The trouble with the blinking is
that it is based on *time* so it slows things down. Worse, it works
inconsistently! Sometimes it spits out sensible ascii codes and
sometimes it, well, spits out weird garbage. When you use it in person
it works fine though. So we keep it on when not testing.
Cleans up some redundancy in when testing CLI errors. Less copy and
paste good.
I was tempted to disable the xterm emulation entirely while working on
this because upgrading jLine changed a few things and it was a real pain
to update. But If we turned that off then we'd have *nothing* testing
the colors and such. That'd be a shame because we use color in the
output to commicate stuff. I like it so I don't want to break it.
While I was there, I replaces the cli connector's `PrintWriter` with a
`BufferedWriter`. The `PrintWriter` was kind of a trap because `println`
would fail to work properly on windows because we force the terminal
into xterm mode and it doesn't know what to do with windows line
endings. Windows.....
Additionally I fixed a race condition between disabling echo when
reading passwords and fast writers. We were disabling the echo shortly
after sending the prompt. A fast enough writer could send us text before
the echo disable kicked in. Now I delegate to `LineReader#readLine`
with a special echo mask that disables echo. This is both easier to test
and doesn't seem to have the race condition. This race condition was
failing the tests because they are so much faster now. Yay!
Original commit: elastic/x-pack-elasticsearch@d0ec027396
Add basic support for catalog parameters in SYS COLUMN
Pass an empty string instead of a null inside the prepared statement
Don't use pattern for catalog in getColumns
Original commit: elastic/x-pack-elasticsearch@17e9e851a0
* foo.bar can mean either: no table field foo.bar or table foo, field bar
The resolution rule has been extended to include the latter case as
fallback.
* Always check field ambiguity
* Since field with dots can create confusion (when not qualified), the
analyzer always now always checks for both qualified and not-qualified
fields and throws an ambiguity message with the potential candidates.
This forces the use of qualifiers or quotes to better indicate the
desired field.
* Add example of aliasing the table to remove ambiguity
Original commit: elastic/x-pack-elasticsearch@8b70b9c4ee
Incorrect latch caused this test to run slowly (until the await
finished), and could probably cause failure due to incorrect ordering
Original commit: elastic/x-pack-elasticsearch@ebeb8655da
The latches were not placed correctly, allowing the aborts
to be set before we checked the state for Indexing the first time.
This was due to using the DelayingIndexer's built in latch, which
isn't placed quite where we needed it.
Original commit: elastic/x-pack-elasticsearch@590cfa07b0
* Pass InputStream when creating XContent parser
Rather than passing the raw `BytesReference` in when creating the xcontent
parser, this passes the StreamInput (which is an InputStream), this allows us to
decouple XContent from BytesReference.
This is the x-pack side of https://github.com/elastic/elasticsearch/pull/28754
* Use the streamInput variant, not sourceAsString
Original commit: elastic/x-pack-elasticsearch@dd5d8b1654
This adds a new Rollup module to XPack, which allows users to configure periodic "rollup jobs" to pre-aggregate data. That data is then available later for search through a special RollupSearch API, which mimics the DSL and functionality of regular search.
Rollups are used to drastically reduce the on-disk footprint of metric-based data (e.g. timestamped document with numeric and keyword fields). It can also be used to speed up aggregations over large datasets, since the rolled data will be considerably smaller and fewer documents to search.
The PR adds seven new endpoints to interact with Rollups; create/get/delete job, start/stop job, a capabilities API similar to field-caps, and a Rollup-enabled search.
Original commit: elastic/x-pack-elasticsearch@dcde91aacf
Dimitris Athanasiou
Alexander Reelsen
Costin Leau
javanna
Zachary Tong
David Kyle
Lee Hinman
Jay Modi
Tim Brooks
Ryan Ernst
Yogesh Gaikwad
Lee Hinman
Alan Woodward
Tim Vernum
jaymode
Jason Tedor
Tanguy Leroux
Albert Zaharovits
Albert Zaharovits
Chris Earle
Chris Earle
Nik Everett
Yannick Welsch
David Roberts
Ioannis Kakavas
Zachary Tong
Shaunak Kashyap
Igor Motov
polyfractal
Luca Cavanna