This commit parallelizes some parts of the test
and its remove an unnecessary refresh call.
On my local machine it shaves off about 15 seconds
for a test execution time of ~64s (down from ~80s).
This test is still slow but progress over perfection.
Relates #37339
The ScheduledEvent class has never preserved the time
zone so it makes more sense for it to store the start and
end time using Instant rather than ZonedDateTime.
Closes#38620
The assertBusy() that waits the default 10 seconds for a
datafeed to complete very occasionally times out on slow
machines. This commit increases the timeout to 60 seconds.
It will almost never actually take this long, but it's
better to have a timeout that will prevent time being
wasted looking at spurious test failures.
This test failed once in a very long time with the assertion
that there is no document for the `non_existing_job` in the
state index. I could not see how that is possible and I cannot
reproduce. With this commit the failure message will reveal
some examples of the left behind docs which might shed a light
about what could go wrong.
The ML memory tracker does searches against ML results
and config indices. These searches can be asynchronous,
and if they are running while the node is closing then
they can cause problems for other components.
This change adds a stop() method to the MlMemoryTracker
that waits for in-flight searches to complete. Once
stop() has returned the MlMemoryTracker will not kick
off any new searches.
The MlLifeCycleService now calls MlMemoryTracker.stop()
before stopping stopping the node.
Fixes#37117
These two changes are interlinked.
Before this change unsetting ML upgrade mode would wait for all
datafeeds to be assigned and not waiting for their corresponding
jobs to initialise. However, this could be inappropriate, if
there was a reason other that upgrade mode why one job was unable
to be assigned or slow to start up. Unsetting of upgrade mode
would hang in this case.
This change relaxes the condition for considering upgrade mode to
be unset to simply that an assignment attempt has been made for
each ML persistent task that did not fail because upgrade mode
was enabled. Thus after unsetting upgrade mode there is no
guarantee that every ML persistent task is assigned, just that
each is not unassigned due to upgrade mode.
In order to make setting upgrade mode work immediately after
unsetting upgrade mode it was then also necessary to make it
possible to stop a datafeed that was not assigned. There was
no particularly good reason why this was not allowed in the past.
It is trivial to stop an unassigned datafeed because it just
involves removing the persistent task.
The .ml-annotations index is created asynchronously when
some other ML index exists. This can interfere with the
post-test index deletion, as the .ml-annotations index
can be created after all other indices have been deleted.
This change adds an ML specific post-test cleanup step
that runs before the main cleanup and:
1. Checks if any ML indices exist
2. If so, waits for the .ml-annotations index to exist
3. Deletes the other ML indices found in step 1.
4. Calls the super class cleanup
This means that by the time the main post-test index
cleanup code runs:
1. The only ML index it has to delete will be the
.ml-annotations index
2. No other ML indices will exist that could trigger
recreation of the .ml-annotations index
Fixes#38952
* Fix#38623 remove xpack namespace REST API
Except for xpack.usage and xpack.info API's, this moves the last remaining API's out of the xpack namespace
* rename xpack api's inside inside the files as well
* updated yaml tests references to xpack namespaces api's
* update callsApi calls in the IT subclasses
* make sure docs testing does not use xpack namespaced api's
* fix leftover xpack namespaced method names in docs/build.gradle
* found another leftover reference
(cherry picked from commit ccb5d934363c37506b76119ac050a254fa80b5e7)
* ML: update set_upgrade_mode, add logging
* Attempt to fix datafeed isolation
Also renamed a few methods/variables for clarity and added
some comments
Elasticsearch has long [supported](https://www.elastic.co/guide/en/elasticsearch/reference/current/docs-index_.html#index-versioning) compare and set (a.k.a optimistic concurrency control) operations using internal document versioning. Sadly that approach is flawed and can sometime do the wrong thing. Here's the relevant excerpt from the resiliency status page:
> When a primary has been partitioned away from the cluster there is a short period of time until it detects this. During that time it will continue indexing writes locally, thereby updating document versions. When it tries to replicate the operation, however, it will discover that it is partitioned away. It won’t acknowledge the write and will wait until the partition is resolved to negotiate with the master on how to proceed. The master will decide to either fail any replicas which failed to index the operations on the primary or tell the primary that it has to step down because a new primary has been chosen in the meantime. Since the old primary has already written documents, clients may already have read from the old primary before it shuts itself down. The version numbers of these reads may not be unique if the new primary has already accepted writes for the same document
We recently [introduced](https://www.elastic.co/guide/en/elasticsearch/reference/6.x/optimistic-concurrency-control.html) a new sequence number based approach that doesn't suffer from this dirty reads problem.
This commit removes support for internal versioning as a concurrency control mechanism in favor of the sequence number approach.
Relates to #1078
With this change we no longer support pluggable discovery implementations. No
known implementations of `DiscoveryPlugin` actually override this method, so in
practice this should have no effect on the wider world. However, we were using
this rather extensively in tests to provide the `test-zen` discovery type. We
no longer need a separate discovery type for tests as we no longer need to
customise its behaviour.
Relates #38410
If a job cannot be assigned to a node because an index it
requires is unavailable and there are lazy ML nodes then
index unavailable should be reported as the assignment
explanation rather than waiting for a lazy ML node.
X-Pack security supports built-in authentication service
`token-service` that allows access tokens to be used to
access Elasticsearch without using Basic authentication.
The tokens are generated by `token-service` based on
OAuth2 spec. The access token is a short-lived token
(defaults to 20m) and refresh token with a lifetime of 24 hours,
making them unsuitable for long-lived or recurring tasks where
the system might go offline thereby failing refresh of tokens.
This commit introduces a built-in authentication service
`api-key-service` that adds support for long-lived tokens aka API
keys to access Elasticsearch. The `api-key-service` is consulted
after `token-service` in the authentication chain. By default,
if TLS is enabled then `api-key-service` is also enabled.
The service can be disabled using the configuration setting.
The API keys:-
- by default do not have an expiration but expiration can be
configured where the API keys need to be expired after a
certain amount of time.
- when generated will keep authentication information of the user that
generated them.
- can be defined with a role describing the privileges for accessing
Elasticsearch and will be limited by the role of the user that
generated them
- can be invalidated via invalidation API
- information can be retrieved via a get API
- that have been expired or invalidated will be retained for 1 week
before being deleted. The expired API keys remover task handles this.
Following are the API key management APIs:-
1. Create API Key - `PUT/POST /_security/api_key`
2. Get API key(s) - `GET /_security/api_key`
3. Invalidate API Key(s) `DELETE /_security/api_key`
The API keys can be used to access Elasticsearch using `Authorization`
header, where the auth scheme is `ApiKey` and the credentials, is the
base64 encoding of API key Id and API key separated by a colon.
Example:-
```
curl -H "Authorization: ApiKey YXBpLWtleS1pZDphcGkta2V5" http://localhost:9200/_cluster/health
```
Closes#34383
The explanation so far can be invaluable for troubleshooting
as incorrect decisions made early on in the structure analysis
can result in seemingly crazy decisions or timeouts later on.
Relates elastic/kibana#29821
Today the following settings in the `discovery.zen` namespace are still used:
- `discovery.zen.no_master_block`
- `discovery.zen.hosts_provider`
- `discovery.zen.ping.unicast.concurrent_connects`
- `discovery.zen.ping.unicast.hosts.resolve_timeout`
- `discovery.zen.ping.unicast.hosts`
This commit deprecates all other settings in this namespace so that they can be
removed in the next major version.
In 7.x Java timestamp formats are the default timestamp format and
there is no need to prefix them with "8". (The "8" prefix was used
in 6.7 to distinguish Java timestamp formats from Joda timestamp
formats.)
This change removes the "8" prefixes from timestamp formats in the
output of the ML file structure finder.
Scheduler.schedule(...) would previously assume that caller handles
exception by calling get() on the returned ScheduledFuture.
schedule() now returns a ScheduledCancellable that no longer gives
access to the exception. Instead, any exception thrown out of a
scheduled Runnable is logged as a warning.
This is a continuation of #28667, #36137 and also fixes#37708.
Doc-value fields now return a value that is based on the mappings rather than
the script implementation by default.
This deprecates the special `use_field_mapping` docvalue format which was added
in #29639 only to ease the transition to 7.x and it is not necessary anymore in
7.0.
Runnables can be submitted to
AutodetectProcessManager.AutodetectWorkerExecutorService
without error after it has been shutdown which can lead
to requests timing out as their handlers are never called
by the terminated executor.
This change throws an EsRejectedExecutionException if a
runnable is submitted after after the shutdown and calls
AbstractRunnable.onRejection on any tasks not run.
Closes#37108
This commit moves the auditing of job deletion related errors
to the final listener in the job delete action. This ensures
any error that occurs during job deletion is audited.
* ML: Add MlMetadata.upgrade_mode and API
* Adding tests
* Adding wait conditionals for the upgrade_mode call to return
* Adding tests
* adjusting format and tests
* Adjusting wait conditions for api return and msgs
* adjusting doc tests
* adding upgrade mode tests to black list
We have read and write aliases for the ML results indices. However,
the job still had methods that purported to reliably return the name
of the concrete results index being used by the job. After reindexing
prior to upgrade to 7.x this will be wrong, so the method has been
renamed and the comments made more explicit to say the returned index
name may not be the actual concrete index name for the lifetime of the
job. Additionally, the selection of indices when deleting the job
has been changed so that it works regardless of concrete index names.
All these changes are nice-to-have for 6.7 and 7.0, but will become
critical if we add rolling results indices in the 7.x release stream
as 6.7 and 7.0 nodes may have to operate in a mixed version cluster
that includes a version that can roll results indices.
The ML file structure finder has always reported both Joda
and Java time format strings. This change makes the Java time
format strings the ones that are incorporated into mappings
and ingest pipeline definitions.
The BWC syntax of prepending "8" to these formats is used.
This will need to be removed once Java time format strings
become the default in Elasticsearch.
This commit also removes direct imports of Joda classes in the
structure finder unit tests. Instead the core Joda BWC class
is used.
* Remove empty statements
There are a couple of instances of undocumented empty statements all across the
code base. While they are mostly harmless, they make the code hard to read and
are potentially error-prone. Removing most of these instances and marking blocks
that look empty by intention as such.
* Change test, slightly more verbose but less confusing
When upgrading from 5.4 to 5.5 to 6.7 (inclusive) it was
necessary to ensure there was a mapping for type "doc" on
the ML state index before opening a job. This was because
5.4 created a multi-type ML state index.
In version 7.x we can be sure that any such 5.4 index is no
longer in use. It would have had to be reindexed into the
6.x index format prior to the upgrade to version 7.x.
This commit changes the default for the `track_total_hits` option of the search request
to `10,000`. This means that by default search requests will accurately track the total hit count
up to `10,000` documents, requests that match more than this value will set the `"total.relation"`
to `"gte"` (e.g. greater than or equals) and the `"total.value"` to `10,000` in the search response.
Scroll queries are not impacted, they will continue to count the total hits accurately.
The default is set back to `true` (accurate hit count) if `rest_total_hits_as_int` is set in the search request.
I choose `10,000` as the default because that's also the number we use to limit pagination. This means that users will be able to know how far they can jump (up to 10,000) even if the total number of hits is not accurate.
Closes#33028
* Use ILM for Watcher history deletion
This commit adds an index lifecycle policy for the `.watch-history-*` indices.
This policy is automatically used for all new watch history indices.
This does not yet remove the automatic cleanup that the monitoring plugin does
for the .watch-history indices, and it does not touch the
`xpack.watcher.history.cleaner_service.enabled` setting.
Relates to #32041
This commit moves the aggregation and mapping code from joda time to
java time. This includes field mappers, root object mappers, aggregations with date
histograms, query builders and a lot of changes within tests.
The cut-over to java time is a requirement so that we can support nanoseconds
properly in a future field mapper.
Relates #27330
This change moves the update to the results index mappings
from the open job action to the code that starts the
autodetect process.
When a rolling upgrade is performed we need to update the
mappings for already-open jobs that are reassigned from an
old version node to a new version node, but the open job
action is not called in this case.
Closes#37607
The ML subproject of xpack has a cache for the cpp artifact snapshots
which is checked on each build. The cache is outside of the build dir so
that it is not wiped on a typical clean, as the artifacts can be large
and do not change often. This commit adds a cleanCache task which will
wipe the cache dir, as over time the size of the directory can become
bloated.
This is a continuation of #28667 and has as goal to convert all executors to propagate errors to the
uncaught exception handler. Notable missing ones were the direct executor and the scheduler. This
commit also makes it the property of the executor, not the runnable, to ensure this property. A big
part of this commit also consists of vastly improving the test coverage in this area.
Migrate ml job and datafeed config of open jobs and update
the parameters of the persistent tasks as they become unallocated
during a rolling upgrade. Block allocation of ml persistent tasks
until the configs are migrated.
The test that remote clusters used by ML datafeeds have
a license that allows ML was not accounting for the
possibility that the remote cluster name could be
wildcarded. This change fixes that omission.
Fixes#36228
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
When this message was first added the model debug config was
the only thing that could be updated, but now more aspects of
the config can be updated so the message needs to be more
general.
* ML: Updating .ml-state calls to be able to support > 1 index
* Matching bulk delete behavior with dbq
* Adjusting state name
* refreshing indices before search
* fixing line length
* adjusting index expansion options
This is a reinforcement of #37227. It turns out that
persistent tasks are not made stale if the node they
were running on is restarted and the master node does
not notice this. The main scenario where this happens
is when minimum master nodes is the same as the number
of nodes in the cluster, so the cluster cannot elect a
master node when any node is restarted.
When an ML node restarts we need the datafeeds for any
jobs that were running on that node to not just wait
until the jobs are allocated, but to wait for the
autodetect process of the job to start up. In the case
of reassignment of the job persistent task this was
dealt with by the stale status test. But in the case
where a node restarts but its persistent tasks are not
reassigned we need a deeper test.
Fixes#36810
Added warnings checks to existing tests
Added “defaultTypeIfNull” to DocWriteRequest interface so that Bulk requests can override a null choice of document type with any global custom choice.
Related to #35190
Jobs created in version 6.1 or earlier can have a
null model_memory_limit. If these are parsed from
cluster state following a full cluster restart then
we replace the null with 4096mb to make the meaning
explicit. But if such jobs are streamed from an
old node in a mixed version cluster this does not
happen. Therefore we need to account for the
possibility of a null model_memory_limit in the ML
memory tracker.
* ML: add migrate anomalies assistant
* adjusting failure handling for reindex
* Fixing request and tests
* Adding tests to blacklist
* adjusting test
* test fix: posting data directly to the job instead of relying on datafeed
* adjusting API usage
* adding Todos and adjusting endpoint
* Adding types to reindexRequest
* removing unreliable "live" data test
* adding index refresh to test
* adding index refresh to test
* adding index refresh to yaml test
* fixing bad exists call
* removing todo
* Addressing remove comments
* Adjusting rest endpoint name
* making service have its own logger
* adjusting validity check for newindex names
* fixing typos
* fixing renaming
We already had logic to stop datafeeds running against
jobs that were OPENING, but a job that relocates from
one node to another while OPENED stays OPENED, and this
could cause the datafeed to fail when it sent data to
the OPENED job on its new node before it had a
corresponding autodetect process.
This change extends the check to stop datafeeds running
when their job is OPENING _or_ stale (i.e. has not had
its status reset since relocating to a different node).
Relates #36810
When a 6.1-6.3 job is opened in a later version
we increase the model memory limit by 30% if it's
below 0.5GB. The migration of jobs from cluster
state to the config index changes the job version,
so we need to also do this uplift as part of that
config migration.
Relates #36961
The unused state remover was never adjusted to account for jobs stored
in the config index. The result was that when triggered it removed
state for all jobs stored in the config index.
This commit fixes the issue.
Closes#37109
Changes the feature usage retrieval to use the job manager rather than
directly talking to the cluster state, because jobs can now be either in
cluster state or stored in an index
This is a follow-up of #36702 / #36698
... MlDistributedFailureIT.testLoseDedicatedMasterNode.
An intermittent failure has been observed in
`MlDistributedFailureIT. testLoseDedicatedMasterNode`.
The test launches a cluster comprised by a dedicated master node
and a data and ML node. It creates a job and datafeed and starts them.
It then shuts down and restarts the master node. Finally, the test asserts
that the two tasks have been reassigned within 10s.
The intermittent failure is due to the assertions that the tasks have been
reassigned failing. Investigating the failure revealed that the `assertBusy`
that performs that assertion times out. Furthermore, it appears that the
job task is not reassigned because the memory tracking info is stale.
Memory tracking info is refreshed asynchronously when a job is attempted
to be reassigned. Tasks are attempted to be reassigned either due to a relevant
cluster state change or periodically. The periodic interval is controlled by a cluster
setting called `cluster.persistent_tasks.allocation.recheck_interval` and defaults to 30s.
What seems to be happening in this test is that if all cluster state changes after the
master node is restarted come through before the async memory info refresh completes,
then the job might take up to 30s until it is attempted to reassigned. Thus the `assertBusy`
times out.
This commit changes the test to reduce the periodic check that reassigns persistent
tasks to `200ms`. If the above theory is correct, this should eradicate those failures.
Closes#36760
This change cleans up a number of ugly BWC
workarounds in the ML code.
7.0 cannot run in a mixed version cluster with
versions prior to 6.7, so code that deals with
these old versions is no longer required.
Closes#29963
Fixes two minor problems reported after merge of #36731:
1. Name the creation method to make clear it only creates
if necessary
2. Avoid multiple simultaneous in-flight creation requests
* ML having delayed data detection create annotations
* adding upsertAsDoc, audit, and changing user
* changing update to just index the doc with the id set
* [ML] Job and datafeed mappings with index template (#32719)
Index mappings for the configuration documents
* [ML] Job config document CRUD operations (#32738)
* [ML] Datafeed config CRUD operations (#32854)
* [ML] Change JobManager to work with Job config in index (#33064)
* [ML] Change Datafeed actions to read config from the config index (#33273)
* [ML] Allocate jobs based on JobParams rather than cluster state config (#33994)
* [ML] Return missing job error when .ml-config is does not exist (#34177)
* [ML] Close job in index (#34217)
* [ML] Adjust finalize job action to work with documents (#34226)
* [ML] Job in index: Datafeed node selector (#34218)
* [ML] Job in Index: Stop and preview datafeed (#34605)
* [ML] Delete job document (#34595)
* [ML] Convert job data remover to work with index configs (#34532)
* [ML] Job in index: Get datafeed and job stats from index (#34645)
* [ML] Job in Index: Convert get calendar events to index docs (#34710)
* [ML] Job in index: delete filter action (#34642)
This changes the delete filter action to search
for jobs using the filter to be deleted in the index
rather than the cluster state.
* [ML] Job in Index: Enable integ tests (#34851)
Enables the ml integration tests excluding the rolling upgrade tests and a lot of fixes to
make the tests pass again.
* [ML] Reimplement established model memory (#35500)
This is the 7.0 implementation of a master node service to
keep track of the native process memory requirement of each ML
job with an associated native process.
The new ML memory tracker service works when the whole cluster
is upgraded to at least version 6.6. For mixed version clusters
the old mechanism of established model memory stored on the job
in cluster state was used. This means that the old (and complex)
code to keep established model memory up to date on the job object
has been removed in 7.0.
Forward port of #35263
* [ML] Need to wait for shards to replicate in distributed test (#35541)
Because the cluster was expanded from 1 node to 3 indices would
initially start off with 0 replicas. If the original node was
killed before auto-expansion to 1 replica was complete then
the test would fail because the indices would be unavailable.
* [ML] DelayedDataCheckConfig index mappings (#35646)
* [ML] JIndex: Restore finalize job action (#35939)
* [ML] Replace Version.CURRENT in streaming functions (#36118)
* [ML] Use 'anomaly-detector' in job config doc name (#36254)
* [ML] Job In Index: Migrate config from the clusterstate (#35834)
Migrate ML configuration from clusterstate to index for closed jobs
only once all nodes are v6.6.0 or higher
* [ML] Check groups against job Ids on update (#36317)
* [ML] Adapt to periodic persistent task refresh (#36633)
* [ML] Adapt to periodic persistent task refresh
If https://github.com/elastic/elasticsearch/pull/36069/files is
merged then the approach for reallocating ML persistent tasks
after refreshing job memory requirements can be simplified.
This change begins the simplification process.
* Remove AwaitsFix and implement TODO
* [ML] Default search size for configs
* Fix TooManyJobsIT.testMultipleNodes
Two problems:
1. Stack overflow during async iteration when lots of
jobs on same machine
2. Not effectively setting search size in all cases
* Use execute() instead of submit() in MlMemoryTracker
We don't need a Future to wait for completion
* [ML][TEST] Fix NPE in JobManagerTests
* [ML] JIindex: Limit the size of bulk migrations (#36481)
* [ML] Prevent updates and upgrade tests (#36649)
* [FEATURE][ML] Add cluster setting that enables/disables config migration (#36700)
This commit adds a cluster settings called `xpack.ml.enable_config_migration`.
The setting is `true` by default. When set to `false`, no config migration will
be attempted and non-migrated resources (e.g. jobs, datafeeds) will be able
to be updated normally.
Relates #32905
* [ML] Snapshot ml configs before migrating (#36645)
* [FEATURE][ML] Split in batches and migrate all jobs and datafeeds (#36716)
Relates #32905
* SQL: Fix translation of LIKE/RLIKE keywords (#36672)
* SQL: Fix translation of LIKE/RLIKE keywords
Refactor Like/RLike functions to simplify internals and improve query
translation when chained or within a script context.
Fix#36039Fix#36584
* Fixing line length for EnvironmentTests and RecoveryTests (#36657)
Relates #34884
* Add back one line removed by mistake regarding java version check and
COMPAT jvm parameter existence
* Do not resolve addresses in remote connection info (#36671)
The remote connection info API leads to resolving addresses of seed
nodes when invoked. This is problematic because if a hostname fails to
resolve, we would not display any remote connection info. Yet, a
hostname not resolving can happen across remote clusters, especially in
the modern world of cloud services with dynamically chaning
IPs. Instead, the remote connection info API should be providing the
configured seed nodes. This commit changes the remote connection info to
display the configured seed nodes, avoiding a hostname resolution. Note
that care was taken to preserve backwards compatibility with previous
versions that expect the remote connection info to serialize a transport
address instead of a string representing the hostname.
* [Painless] Add boxed type to boxed type casts for method/return (#36571)
This adds implicit boxed type to boxed types casts for non-def types to create asymmetric casting relative to the def type when calling methods or returning values. This means that a user calling a method taking an Integer can call it with a Byte, Short, etc. legally which matches the way def works. This creates consistency in the casting model that did not previously exist.
* SNAPSHOTS: Adjust BwC Versions in Restore Logic (#36718)
* Re-enables bwc tests with adjusted version conditions now that #36397 enables concurrent snapshots in 6.6+
* ingest: fix on_failure with Drop processor (#36686)
This commit allows a document to be dropped when a Drop processor
is used in the on_failure fork of the processor chain.
Fixes#36151
* Initialize startup `CcrRepositories` (#36730)
Currently, the CcrRepositoryManger only listens for settings updates
and installs new repositories. It does not install the repositories that
are in the initial settings. This commit, modifies the manager to
install the initial repositories. Additionally, it modifies the ccr
integration test to configure the remote leader node at startup, instead
of using a settings update.
* [TEST] fix float comparison in RandomObjects#getExpectedParsedValue
This commit fixes a test bug introduced with #36597. This caused some
test failure as stored field values comparisons would not work when CBOR
xcontent type was used.
Closes#29080
* [Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)
This commit exposes lucene's LatLonShape field as the
default type in GeoShapeFieldMapper. To use the new
indexing approach, simply set "type" : "geo_shape" in
the mappings without setting any of the strategy, precision,
tree_levels, or distance_error_pct parameters. Note the
following when using the new indexing approach:
* geo_shape query does not support querying by
MULTIPOINT.
* LINESTRING and MULTILINESTRING queries do not
yet support WITHIN relation.
* CONTAINS relation is not yet supported.
The tree, precision, tree_levels, distance_error_pct,
and points_only parameters are deprecated.
* TESTS:Debug Log. IndexStatsIT#testFilterCacheStats
* ingest: support default pipelines + bulk upserts (#36618)
This commit adds support to enable bulk upserts to use an index's
default pipeline. Bulk upsert, doc_as_upsert, and script_as_upsert
are all supported.
However, bulk script_as_upsert has slightly surprising behavior since
the pipeline is executed _before_ the script is evaluated. This means
that the pipeline only has access the data found in the upsert field
of the script_as_upsert. The non-bulk script_as_upsert (existing behavior)
runs the pipeline _after_ the script is executed. This commit
does _not_ attempt to consolidate the bulk and non-bulk behavior for
script_as_upsert.
This commit also adds additional testing for the non-bulk behavior,
which remains unchanged with this commit.
fixes#36219
* Fix duplicate phrase in shrink/split error message (#36734)
This commit removes a duplicate "must be a" from the shrink/split error
messages.
* Deprecate types in get_source and exist_source (#36426)
This change adds a new untyped endpoint `{index}/_source/{id}` for both the
GET and the HEAD methods to get the source of a document or check for its
existance. It also adds deprecation warnings to RestGetSourceAction that emit
a warning when the old deprecated "type" parameter is still used. Also updating
documentation and tests where appropriate.
Relates to #35190
* Revert "[Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)"
This reverts commit 5bc7822562.
* Enhance Invalidate Token API (#35388)
This change:
- Adds functionality to invalidate all (refresh+access) tokens for all users of a realm
- Adds functionality to invalidate all (refresh+access)tokens for a user in all realms
- Adds functionality to invalidate all (refresh+access) tokens for a user in a specific realm
- Changes the response format for the invalidate token API to contain information about the
number of the invalidated tokens and possible errors that were encountered.
- Updates the API Documentation
After back-porting to 6.x, the `created` field will be removed from master as a field in the
response
Resolves: #35115
Relates: #34556
* Add raw sort values to SearchSortValues transport serialization (#36617)
In order for CCS alternate execution mode (see #32125) to be able to do the final reduction step on the CCS coordinating node, we need to serialize additional info in the transport layer as part of each `SearchHit`. Sort values are already present but they are formatted according to the provided `DocValueFormat` provided. The CCS node needs to be able to reconstruct the lucene `FieldDoc` to include in the `TopFieldDocs` and `CollapseTopFieldDocs` which will feed the `mergeTopDocs` method used to reduce multiple search responses (one per cluster) into one.
This commit adds such information to the `SearchSortValues` and exposes it through a new getter method added to `SearchHit` for retrieval. This info is only serialized at transport and never printed out at REST.
* Watcher: Ensure all internal search requests count hits (#36697)
In previous commits only the stored toXContent version of a search
request was using the old format. However an executed search request was
already disabling hit counts. In 7.0 hit counts will stay enabled by
default to allow for proper migration.
Closes#36177
* [TEST] Ensure shard follow tasks have really stopped.
Relates to #36696
* Ensure MapperService#getAllMetaFields elements order is deterministic (#36739)
MapperService#getAllMetaFields returns an array, which is created out of
an `ObjectHashSet`. Such set does not guarantee deterministic hash
ordering. The array returned by its toArray may be sorted differently
at each run. This caused some repeatability issues in our tests (see #29080)
as we pick random fields from the array of possible metadata fields,
but that won't be repeatable if the input array is sorted differently at
every run. Once setting the tests seed, hppc picks that up and the sorting is
deterministic, but failures don't repeat with the seed that gets printed out
originally (as a seed was not originally set).
See also https://issues.carrot2.org/projects/HPPC/issues/HPPC-173.
With this commit, we simply create a static sorted array that is used for
`getAllMetaFields`. The change is in production code but really affects
only testing as the only production usage of this method was to iterate
through all values when parsing fields in the high-level REST client code.
Anyways, this seems like a good change as returning an array would imply
that it's deterministically sorted.
* Expose Sequence Number based Optimistic Concurrency Control in the rest layer (#36721)
Relates #36148
Relates #10708
* [ML] Mute MlDistributedFailureIT
* Deprecate types in index API
- deprecate type-based constructors of IndexRequest
- update tests to use typeless IndexRequest constructors
- no yaml tests as they have been already added in #35790
Relates to #35190
The ML UI now provides the ability for users to annotate
time periods with arbitrary text to add insight to what
happened.
This change makes the backend create the index for these
annotations, together with read and write aliases to
make future upgrades possible without adding complexity
to the UI.
It also adds read and write permission to the index for
all ML users (not just admins).
The spec for the index is in
https://github.com/elastic/kibana/pull/26034/files#diff-c5c6ac3dbb0e7c91b6d127aa06121b2cR7
Relates #33376
Relates elastic/kibana#26034
The file structure finder has timeout functionality,
but prior to this change it would not interrupt a
single long-running Grok match attempt.
This commit hooks into the ThreadWatchdog facility
provided by the Grok library to interrupt individual
Grok matches that may be running at the time the
file structure finder timeout expires.
Redeprecates the `/_xpack/rollup` endpoints in favor of `/_rollup`.
When we cleanup the rollup in a cluster containing 6.x nodes we need to
use `/_xpack/rollup` instead of `/_rollup` because the 6.x nodes don't
know about `/_rollup`. In those cases we must ignore the deprecation
warnings that the 7.0 node will return for the end point.
Closes#36044
* This commit is part of our plan to deprecate and ultimately remove the use of _xpack in the REST APIs.
- REST API docs
- HLRC docs and doc tests
- Handle REST actions with deprecation warnings
- Changed endpoints in rest-api-spec and relevant file names
This commit makes FormatDateTimeFormatter and DateFormatter apis close
to each other, so that the former can be removed in favor of the latter.
This PR does not change the uses of FormatDateTimeFormatter yet, so that
that future change can be purely mechanical.
The results iterator is consuming and closing the results stream
once it is done. It seems this should not be the responsibility
of the results iterator. It stops the iterator from being reusable
for different processes where closing the stream is not desirable.
This commit is moving the consuming and closing of the results stream
into the autodetect result processor.
This commit moves back to use explicit dependsOn for test tasks on
check. Not all tasks extending RandomizedTestingTask should be run by
check directly.
This commit changes the format of the `hits.total` in the search response to be an object with
a `value` and a `relation`. The `value` indicates the number of hits that match the query and the
`relation` indicates whether the number is accurate (in which case the relation is equals to `eq`)
or a lower bound of the total (in which case it is equals to `gte`).
This change also adds a parameter called `rest_total_hits_as_int` that can be used in the
search APIs to opt out from this change (retrieve the total hits as a number in the rest response).
Note that currently all search responses are accurate (`track_total_hits: true`) or they don't contain
`hits.total` (`track_total_hits: true`). We'll add a way to get a lower bound of the total hits in a
follow up (to allow numbers to be passed to `track_total_hits`).
Relates #33028
Closes#35435
- make it easier to add additional testing tasks with the proper configuration and add some where they were missing.
- mute or fix failing tests
- add a check as part of testing conventions to find classes not included in any testing task.
This commit replaces usages of Streamable with Writeable for the
BaseTasksResponse / TransportTasksAction classes and subclasses of
these classes.
Note that where possible response fields were made final.
Relates to #34389
* Replace Streamable w/ Writeable in BaseTasksRequest and subclasses
This commit replaces usages of Streamable with Writeable for the
BaseTasksRequest / TransportTasksAction classes and subclasses of
these classes.
Relates to #34389
Dimitris Athanasiou
Mehran Koushkebaghi
David Roberts
Benjamin Trent
Martijn Laarman
Boaz Leskes
David Turner
Yogesh Gaikwad
Henning Andersen
Adrien Grand
David Kyle
Henrique Gonçalves
Christoph Büscher
Jim Ferenczi
Lee Hinman
Alexander Reelsen
Ryan Ernst
Yannick Welsch
Hendrik Muhs
Julie Tibshirani
Gordon Brown
markharwood
Armin Braun
Alpar Torok
Mayya Sharipova
Nik Everett
Ioannis Kakavas
Martijn van Groningen