* Adds a new auto-interval date histogram
This change adds a new type of histogram aggregation called `auto_date_histogram` where you can specify the target number of buckets you require and it will find an appropriate interval for the returned buckets. The aggregation works by first collecting documents in buckets at second interval, when it has created more than the target number of buckets it merges these buckets into minute interval bucket and continues collecting until it reaches the target number of buckets again. It will keep merging buckets when it exceeds the target until either collection is finished or the highest interval (currently years) is reached. A similar process happens at reduce time.
This aggregation intentionally does not support min_doc_count, offest and extended_bounds to keep the already complex logic from becoming more complex. The aggregation accepts sub-aggregations but will always operate in `breadth_first` mode deferring the computation of sub-aggregations until the final buckets from the shard are known. min_doc_count is effectively hard-coded to zero meaning that we will insert empty buckets where necessary.
Closes#9572
* Adds documentation
* Added sub aggregator test
* Fixes failing docs test
* Brings branch up to date with master changes
* trying to get tests to pass again
* Fixes multiBucketConsumer accounting
* Collects more buckets than needed on shards
This gives us more options at reduce time in terms of how we do the
final merge of the buckeets to produce the final result
* Revert "Collects more buckets than needed on shards"
This reverts commit 993c782d117892af9a3c86a51921cdee630a3ac5.
* Adds ability to merge within a rounding
* Fixes nonn-timezone doc test failure
* Fix time zone tests
* iterates on tests
* Adds test case and documentation changes
Added some notes in the documentation about the intervals that can bbe
returned.
Also added a test case that utilises the merging of conseecutive buckets
* Fixes performance bug
The bug meant that getAppropriate rounding look a huge amount of time
if the range of the data was large but also sparsely populated. In
these situations the rounding would be very low so iterating through
the rounding values from the min key to the max keey look a long time
(~120 seconds in one test).
The solution is to add a rough estimate first which chooses the
rounding based just on the long values of the min and max keeys alone
but selects the rounding one lower than the one it thinks is
appropriate so the accurate method can choose the final rounding taking
into account the fact that intervals are not always fixed length.
Thee commit also adds more tests
* Changes to only do complex reduction on final reduce
* merge latest with master
* correct tests and add a new test case for 10k buckets
* refactor to perform bucket number check in innerBuild
* correctly derive bucket setting, update tests to increase bucket threshold
* fix checkstyle
* address code review comments
* add documentation for default buckets
* fix typo
Because this is a static method on a public API, and one that we encourage
plugin authors to use, the method with the typo is deprecated in 6.x
rather than just renamed.
With this commit we introduce a new circuit-breaking strategy to the parent
circuit breaker. Contrary to the current implementation which only accounts for
memory reserved via child circuit breakers, the new strategy measures real heap
memory usage at the time of reservation. This allows us to be much more
aggressive with the circuit breaker limit so we bump it to 95% by default. The
new strategy is turned on by default and can be controlled with the new cluster
setting `indices.breaker.total.userealmemory`.
Note that we turn it off for all integration tests with an internal test cluster
because it leads to spurious test failures which are of no value (we cannot
fully control heap memory usage in tests). All REST tests, however, will make
use of the real memory circuit breaker.
Relates #31767
Forces fetch tasks to queue even in the event that the queue is
already full. The reasoning is that fetch tasks may only be follow-up
to query tasks, so the number of additional fetch tasks that may enter
the threadpool is expected to be reasonable.
Closes#29442
This test produced different implementations of joda time classes,
depending on if the data was serialized or not (DateTime vs
MutableDateTime). This now uses a common base class to extract the
milliseconds from the data.
Closes#31992
* Added lenient flag for synonym-tokenfilter.
Relates to #30968
* added docs for synonym-graph-tokenfilter
-- Also made lenient final
-- changed from !lenient to lenient == false
* Changes after review (1)
-- Renamed to ElasticsearchSynonymParser
-- Added explanation for ElasticsearchSynonymParser::add method
-- Changed ElasticsearchSynonymParser::logger instance to static
* Added lenient option for WordnetSynonymParser
-- also added more documentation
* Added additional documentation
* Improved documentation
The initial check will never be true, because of the special semantics of NaN,
where no value is equal to Nan, including NaN. Thus, x == Double.NaN always
evaluates to false. The method still works correct because later computations
will also return NaN if the avg argument is NaN, but the intended shortcut
doesn't work.
A newly added class called DateFormatters now contains java.time based
builders for dates, which also intends to be fully backwards compatible,
when the name based date formatters are picked. Also a new class named
CompoundDateTimeFormatter for being able to parse multiple different
formats has been added.
A duelling test class has been added that ensures the same dates when
parsing java or joda time formatted dates for the name based dates.
Note, that java.time and joda time are not fully backwards compatible,
which also means that old formats will currently not work with this
setup.
* add support for is_write_index in put-alias body parsing
The Rest Put-Alias Action does separate parsing of the alias body
to construct the IndicesAliasesRequest. This extra parsing
was missed in #30703.
* test flag was not just ignored by the parser
* disable backcompat tests
* Handle missing values in painless
Throw an exception for `doc['field'].value`
if this document is missing a value for the `field`.
For 7.0:
This is the default behaviour from 7.0
For 6.x:
To enable this behavior from 6.x, a user can set a jvm.option:
`-Des.script.exception_for_missing_value=true` on a node.
If a user does not enable this behavior, a deprecation warning is logged on start up.
Closes#29286
If a get alias api call requests a specific alias pattern then
indices not having any matching aliases should not be included in the response.
This is a second attempt to fix this (first attempt was #28294).
The reason that the first attempt was reverted is because when xpack
security is enabled then index expression (like * or _all) are resolved
prior to when a request is processed in the get aliases transport action,
then `MetaData#findAliases` can't know whether requested all where
requested since it was already expanded in concrete alias names. This
change replaces aliases(...) replaceAliases(...) method on AliasesRequests
class and leave the aliases(...) method on subclasses. So there is a distinction
between when xpack security replaces aliases and a user setting aliases via
the transport or high level http client.
Closes#27763
This is a followup to #31537. It makes a number of changes requested by
a review that came after the PR was merged. These are mostly cleanups
and doc improvements.
Fixes 2 issues that together cause errors during index creation
with geo_shapes that use the term strategy. The term strategy changes
the default for points_only parameter, but this wasn't taken into
account during serialization. So, setting the term strategy would add
`"points_only": true` to serialization. At the same time if the term
strategy would also cause the `points_only` setting to be not marked as
a processed element during parsing, which would cause index creation to
fail with the error: `Mapping definition for [location] has unsupported`
`parameters: [points_only : true]`.
Fixes#31707
Removes support for storing scripts without the usual json around the
script. So You can no longer do:
```
POST _scripts/<templatename>
{
"query": {
"match": {
"title": "{{query_string}}"
}
}
}
```
and must instead do:
```
POST _scripts/<templatename>
{
"script": {
"lang": "mustache",
"source": {
"query": {
"match": {
"title": "{{query_string}}"
}
}
}
}
}
```
This improves error reporting when you attempt to store a script but don't
quite get the syntax right. Before, there was a good chance that we'd
think of it as a "raw" template and just store it. Now we won't do that.
Nice.
Today TransportService is tightly coupled with Transport since it
requires an instance of TransportService in order to receive responses
and send requests. This is mainly due to the Request and Response handlers
being maintained in TransportService but also because of the lack of a proper
callback interface.
This change moves request handler registry and response handler registration into
Transport and adds all necessary methods to `TransportConnectionListener` in order
to remove the `TransportService` dependency from `Transport`
Transport now accepts one or more `TransportConnectionListener` instances that are
executed sequentially in a blocking fashion.
The Rectangle constructor validates bounds before coerce has a chance
to normalize coordinates so it cannot be used as intermittent storage.
This commit removes the Rectangle as an intermittent storage for the
bounding box coordinates.
Fixes#31718
AWS supports the creation and use of credentials that are only valid for a
fixed period of time. These credentials comprise three parts: the usual access
key and secret key, together with a session token. This commit adds support for
these three-part credentials to the EC2 discovery plugin and the S3 repository
plugin.
Note that session tokens are only valid for a limited period of time and yet
there is no mechanism for refreshing or rotating them when they expire without
restarting Elasticsearch. Nonetheless, this feature is already useful for
nodes that need only run for a few days, such as for training, testing or
evaluation. #29135 tracks the work towards allowing these credentials to be
refreshed at runtime.
Resolves#16428
This PR does the server side work for adding the Get Index API to the REST
high-level-client, namely moving resolving default settings to the
transport action. A follow up would be the client side changes.
So far the in-flight request circuit breaker has only accounted for the
on-the-wire representation of a request. However, we convert the raw
request into XContent internally which increases the overhead.
Therefore, we increase the value of the corresponding setting
`network.breaker.inflight_requests.overhead` from one to two. While this
value is still rather conservative (we assume that the representation as
structured objects has no overhead compared to the byte[]), it is closer
to reality than the current value.
Relates #31613
`MemoryCircuitBreakerTests` conflates two test aspects: It tests
individual circuit breakers as well as the circuit breaker hierarchy.
With this commit we split those two aspects into two test classes:
* Tests for individual circuit breakers stay in the current class
* Other tests are moved to `HierarchyCircuitBreakerServiceTests`
Adds a new parameter to the BlobContainer#write*Blob methods to specify whether the existing file
should be overridden or not. For some metadata files in the repository, we actually want to replace
the current file. This is currently implemented through an explicit blob delete and then a fresh write.
In case of using a cloud provider (S3, GCS, Azure), this results in 2 API requests instead of just 1.
This change will therefore allow us to achieve the same functionality using less API requests.
Before deleting a repository index generation file, BlobStoreRepository
checks for the existence of the file and then deletes it. We can save
a request here by using BlobContainer.deleteBlobIgnoringIfNotExists()
which ignores error when deleting a file that does not exist.
Since there is no way with S3 to know if a non versioned file existed
before being deleted, this pull request also changes S3BlobContainer so
that it now implements deleteBlobIgnoringIfNotExists(). It will now save
one more request (blobExist?) when appropriate. The tests and fixture
have been modified to conform the S3 API that always returns a 204/NO
CONTENT HTTP response on deletions.
Make password hashing algorithm/cost configurable for the
stored passwords of users for the realms that this applies
(native, reserved). Replaces predefined choice of bcrypt with
cost factor 10.
This also introduces PBKDF2 with configurable cost
(number of iterations) as an algorithm option for password hashing
both for storing passwords and for the user cache.
Password hash validation algorithm selection takes into
consideration the stored hash prefix and only a specific number
of algorithnm and cost factor options for brypt and pbkdf2 are
whitelisted and can be selected in the relevant setting.
The TaskManager and TaskAwareRequest could return null when registering
a task according to their javadocs, but no implementations ever actually
did that. This commit removes that wording from the javadocs and ensures
null is no longer allowed.
* Remove deprecation warnings to prepare for Gradle 5
Gradle replaced `project.sourceSets.main.output.classesDir` of type
`File` with `project.sourceSets.main.output.classesDirs` of type
`FileCollection`
(see [SourceSetOutput](https://github.com/gradle/gradle/blob/master/subprojects/plugins/src/main/java/org/gradle/api/tasks/SourceSetOutput.java))
Build output is now stored on a per language folder.
There are a few places where we use that, here's these and how it's
fixed:
- Randomized Test execution
- look in all test folders ( pass the multi dir configuration to the
ant runner )
- DRY the task configuration by introducing `basedOn` for
`RandomizedTestingTask` DSL
- Extend the naming convention test to support passing in multiple
directories
- Fix the standalon test plugin, the dires were not passed trough,
checked with a debuger and the statement had no affect due to a
missing `=`.
Closes#30354
* Only check Java tests, PR feedback
- Name checker was ran for Groovy tests that don't adhere to the same
convections causing the check to fail
- implement PR feedback
* Replace `add` with `addAll`
This worked because the list is passed to `project.files` that does the
right thing.
* Revert "Only check Java tests, PR feedback"
This reverts commit 9bd9389875d8b88aadb50df57a45cd0d2b073241.
* Remove `basedOn` helper
* Bring some changes back
Previus revert accidentally reverted too much
* Fix negation
* add back public
* revert name check changes
* Revert "revert name check changes"
This reverts commit a2800c0b363168339ea65e2a79ec8256e5883e6d.
* Pass all dirs to name check
Only run on Java for build-tools, this is safe because it's a self test.
It needs more work before we could pass in the Groovy classes as well as
these inherit from `GroovyTestCase`
* remove self tests from name check
The self complicates the task setup and disable real checks on
build-tools.
With this change there are no more self tests, and the build-tools tests
adhere to the conventions.
The self test will be replaced by gradle test kit, thus the addition of
the Gradle plugin builder plugin.
* First test to run a Gradle build
* Add tests that replace the name check self test
* Clean up integ test base class
* Always run tests
* Align with test naming conventions
* Make integ. test case inherit from unit test case
The check requires this
* Remove `import static org.junit.Assert.*`
* Move to Gradle 4.8 RC1
* Use latest version of plugin
The current does not work with Gradle 4.8 RC1
* Switch to Gradle GA
* Add and configure build compare plugin
* add work-around for https://github.com/gradle/gradle/issues/5692
* work around https://github.com/gradle/gradle/issues/5696
* Make use of Gradle build compare with reference project
* Make the manifest more compare friendly
* Clear the manifest in compare friendly mode
* Remove animalsniffer from buildscript classpath
* Fix javadoc errors
* Fix doc issues
* reference Gradle issues in comments
* Conditionally configure build compare
* Fix some more doclint issues
* fix typo in build script
* Add sanity check to make sure the test task was replaced
Relates to #31324. It seems like Gradle has an inconsistent behavior and
the taks is not always replaced.
* Include number of non conforming tasks in the exception.
* No longer replace test task, create implicit instead
Closes#31324. The issue has full context in comments.
With this change the `test` task becomes nothing more than an alias for `utest`.
Some of the stand alone tests that had a `test` task now have `integTest`, and a
few of them that used to have `integTest` to run multiple tests now only
have `check`.
This will also help separarate unit/micro tests from integration tests.
* Revert "No longer replace test task, create implicit instead"
This reverts commit f1ebaf7d93e4a0a19e751109bf620477dc35023c.
* Fix replacement of the test task
Based on information from gradle/gradle#5730 replace the task taking
into account the task providres.
Closes#31324.
* Only apply build comapare plugin if needed
* Make sure test runs before integTest
* Fix doclint aftter merge
* PR review comments
* Switch to Gradle 4.8.1 and remove workaround
* PR review comments
* Consolidate task ordering
With PR #31574 we now ensure that connections are established under the proper
thread context. There is a test in RemoteClusterConnectionTests, however,
that shuts down the service while connecting. With the above change, a new kind
of exception can occur that the test is unaware of.
Added support to the high-level rest client for the create snapshot API call. This required
several changes to toXContent which may need to be cleaned up in a later PR. Also
added several parsers for fromXContent to be able to retrieve appropriate responses
along with tests.
Establishing remote cluster connections uses a queue to coordinate multiple concurrent connect
attempts. Connect attempts can be initiated by user triggered searches as well as by system events
(e.g. when nodes disconnect). Multiple such concurrent events can lead to the connectListener of
one event to be called under the thread context of another connect attempt. This can lead to the
situation as seen in #31462 where the connect listener is executed under the system context, which
breaks when fetching the search shards from the remote cluster.
Closes#31462
Currently RandomObjects::addFields can potentially generate a large number of fields This commit decreases the chances that a new object or array is added as a new branch of an object, which lowers the probability of ending up with very big documents generated. It also reduces the number of documents generated for the SimulatePipelineResponseTests from 10 to 5 to reduce the testing time required for parsing.
This commit enhances the assertion message when de-duplicating values on
a thread context header so that if this assertion trips we can see the
values and their correpsonding unique values to understand why this
assertion might trip.
AliasOrIndex.Alias#writeIndex was returning a write index when
an alias was pointing to only one index, regardless whether `is_write_index` was
set to `false`. This fixes that so that there is no write index in such a case
that an alias points to only one index with `is_write_index=false`.
* Migrate scripted metric aggregation scripts to ScriptContext design #29328
* Rename new script context container class and add clarifying comments to remaining references to params._agg(s)
* Misc cleanup: make mock metric agg script inner classes static
* Move _score to an accessor rather than an arg for scripted metric agg scripts
This causes the score to be evaluated only when it's used.
* Documentation changes for params._agg -> agg
* Migration doc addition for scripted metric aggs _agg object change
* Rename "agg" Scripted Metric Aggregation script context variable to "state"
* Rename a private base class from ...Agg to ...State that I missed in my last commit
* Clean up imports after merge
TransportAction currently contains 2 doExecute methods, one which takes
a the task, and one that does not. The latter is what some subclasses
implement, while the first one just calls the latter, dropping the given
task. This commit combines these methods, in favor of just always
assuming a task is present.
TransportRequestHandler currently contains 2 messageReceived methods,
one which takes a Task, and one that does not. The first just delegates
to the second. This commit changes all existing implementors of
TransportRequestHandler to implement the version which takes Task, thus
allowing the class to be a functional interface, and eliminating the
need to throw exceptions when a task needs to be ensured.
Introduces support for multiple host providers, which allows the settings based hosts resolver to be
treated just as any other UnicastHostsProvider. Also introduces the notion of a HostsResolver so
that plugins such as FileBasedDiscovery do not need to create their own thread pool for resolving
hosts, making it easier to add new similar kind of plugins.
Get Mapping currently throws index not found exception (and returns
404 status code) from the REST layer whenever an index was specified
and no indices have been returned. We should not have this logic in the
REST layer though as only our index resolver should decide whether we
need to throw exceptions or not based on provided indices and corresponding
indices options.
Closes#31485
Most transport actions don't need the node ThreadPool. This commit
removes the ThreadPool as a super constructor parameter for
TransportAction. The actions that do need the thread pool then have a
member added to keep it from their own constructor.
We renamed `createNewTranslog` to `fileBasedRecovery` in the
RecoveryTarget but did not do this for RecoverySourceHandler.
This commit makes sure that we a consistent parameter in both
recovery source and target.
With #20695 we removed local transport and there is just TransportAddress now. The
UnicastHostsProvider currently returns DiscoveryNode instances, where, during pinging, we're
actually only making use of the TransportAddress to establish a first connection to the possible new
node. To simplify the interface, we can just return a list of transport addresses instead, which
means that it's not necessary anymore to create fake node objects in each plugin just to return the
address information.
Historically in TcpTransport server channels were represented by the
same channel interface as socket channels. This was necessary as
TcpTransport was parameterized by the channel type. This commit
introduces TcpServerChannel and HttpServerChannel classes. Additionally,
it adds the implementations for the various transports. This allows
server channels to have unique functionality and not implement the
methods they do not support (such as send and getRemoteAddress).
Additionally, with the introduction of HttpServerChannel this commit
extracts some of the storing and closing channel work to the abstract
http server transport.
The QueryCachingPolicy#ALWAYS_CACHE was deprecated in Lucene-7.4 and
will be removed in Lucene-8.0. This change replaces it with QueryCachingPolicy.
This also makes INDEX_QUERY_CACHE_EVERYTHING_SETTING visible in testing only.
The `multiplexer` filter emits multiple tokens at the same position, each
version of the token haivng been passed through a different filter chain.
Identical tokens at the same position are removed.
This allows users to, for example, index lowercase and original-case tokens,
or stemmed and unstemmed versions, in the same field, so that they can search
for a stemmed term within x positions of an unstemmed term.
Currently, DateHistogramAggregationBuilder#rewriteTimeZone uses the aggregation
date math parser and time zone to check whether all values in a read have the
same timezone to speed up computation. However, the upper and lower bounds to
check are retrieved as longs in epoch_millis, so they don't need to get parsed
using a time zone or a parser other than "epoch_millis". This changes this
behaviour that was causing problems when the field type mapping was specifying
only "epoch_millis" as a format but a different timezone than UTC was used.
Closes#31392
Most transport actions don't need to resolve index names. This commit
removes the index name resolver as a super constructor parameter for
TransportAction. The actions that do need the resolver then have a
member added to keep the resolver from their own constructor.
This is a general cleanup of channels and exception handling in http.
This commit introduces a CloseableChannel that is a superclass of
TcpChannel and HttpChannel. This allows us to unify the closing logic
between tcp and http transports. Additionally, the normal http channels
are extracted to the abstract server transport.
Finally, this commit (mostly) unifies the exception handling between nio
and netty4 http server transports.
#31241 changed the cluster state update tasks to run under system context. The context wrapping
did not preserve response headers, though. This has led to a test failure on 6.x #31408, as the
deprecation warnings were not carried back anymore to the caller when creating an index. This
commit changes the restorable context supplier to preserve response headers.
Since #30966, Action no longer has anything but a call to the
GenericAction super constructor. This commit renames GenericAction
into Action, thus eliminating the Action class. Additionally, this
commit removes the Request generic parameter of the class, since
it was unused.
Today if a write replication request fails, we will send a shard-failed
message to the master node to fail that replica. However, if there are
many ongoing write replication requests and the master node is busy, we
might overwhelm the cluster and the master node with many shard-failed
requests.
This commit tries to minimize the shard-failed requests in the above
scenario by caching the ongoing shard-failed requests.
This issue was discussed at
https://discuss.elastic.co/t/half-dead-node-lead-to-cluster-hang/113658/25.
This commit makes it so that cluster state update tasks always run under the system context, only
restoring the original context when the listener that was provided with the task is called. A notable
exception is the clusterStatePublished(...) callback which will still run under system context,
because it's defined on the executor-level, and not the task level, and only called once for the
combined batch of tasks and can therefore not be uniquely identified with a task / thread context.
Relates #30603
The other metric aggregations (min/max/etc) return `null` as their XContent value and string when nothing was computed (due to empty/missing fields). Percentiles and Percentile Ranks, however, return `NaN `which is inconsistent and confusing for the user. This fixes the inconsistency by making the aggs return `null`. This applies to both the numeric value and the "as string" value.
Note: like the metric aggs, this does not change the value if fetched directly from the percentiles object, which will return as `NaN`/`"NaN"`. This only changes the XContent output.
While this is a bugfix, it still breaks bwc in a minor way as the response changes from prior version.
Closes#29066
The following analyzers were moved from server module to analysis-common module:
`greek`, `hindi`, `hungarian`, `indonesian`, `irish`, `italian`, `latvian`,
`lithuanian`, `norwegian`, `persian`, `portuguese`, `romanian`, `russian`,
`sorani`, `spanish`, `swedish`, `turkish` and `thai`.
Relates to #23658
Adds the ability to reread and decrypt the local node keystore.
Commonly, the contents of the keystore, backing the `SecureSettings`,
are not retrievable except during node initialization. This changes that
by adding a new API which broadcasts a password to every node. The
password is used to decrypt the local keystore and use it to populate
a `Settings` object that is passes to all the plugins implementing the
`ReloadablePlugin` interface. The plugin is then responsible to do
whatever "reload" means in his case. When the `reload`handler returns,
the keystore is closed and its contents are no longer retrievable.
Password is never stored persistently on any node.
Plugins that have been moded in this commit are: `repository-azure`,
`repository-s3`, `repository-gcs` and `discovery-ec2`.
If we are running into a race condition between a node being configured
to be a remote node for cross cluster search etc. and that node joining
the cluster we might connect to that node with a remote profile. If that
node now joins the cluster it connected to it as a CCS remote node we use
the wrong profile and can't use bulk connections etc. anymore. This change
uses the remote profile only if we connect to a node that has a different cluster
name than the local cluster. This is not a perfect fix for this situation but
is the safe option while potentially only loose a small optimization of using
less connections per node which is small anyways since we only connect to a
small set of nodes.
Closes#29321
This is related to #28898. This PR implements pooling of bytes arrays
when reading from the wire in the http server transport. In order to do
this, we must integrate with netty reference counting. That manner in
which this PR implements this is making Pages in InboundChannelBuffer
reference counted. When we accessing the underlying page to pass to
netty, we retain the page. When netty releases its bytebuf, it releases
the underlying pages we have passed to it.
This commit adds the is-write-index flag for aliases.
It allows requests to set the flag, and responses to display the flag.
It does not validate and/or affect any indexing/getting/updating behavior
of Elasticsearch -- this will be done in a follow-up PR.
This commit introduces a new property to IndexMetaData called
RolloverInfo. This object contains a map containing the aliases
that were used to rollover the related index, which conditions
were met, and at what time the rollover took place.
much like the `index.creation_date`, it captures the approximate time
that the index was rolled over to a new one.
An expected exception is only thrown when there are documents in the index
created in the test setup. Fixed the test by making sure there is at least one.
Closes#31307
This pull request removes the relationship between the state
of persistent task (as stored in the cluster state) and the status
of the task (as reported by the Task APIs and used in various
places) that have been confusing for some time (#29608).
In order to do that, a new PersistentTaskState interface is added.
This interface represents the persisted state of a persistent task.
The methods used to update the state of persistent tasks are
renamed: updatePersistentStatus() becomes updatePersistentTaskState()
and now takes a PersistentTaskState as a parameter. The
Task.Status type as been changed to PersistentTaskState in all
places were it make sense (in persistent task customs in cluster
state and all other methods that deal with the state of an allocated
persistent task).
This is related to #28898. With the addition of the http nio transport,
we now have two different modules that provide http transports.
Currently most of the http logic lives at the module level. However,
some of this logic can live in server. In particular, some of the
setting of headers, cors, and pipelining. This commit begins this moving
in that direction by introducing lower level abstraction (HttpChannel,
HttpRequest, and HttpResonse) that is implemented by the modules. The
higher level rest request and rest channel work can live entirely in
server.
This commit changes the ack timeout mechanism so that its behavior is closer to the publish
timeout, i.e., it only comes into play after committing a cluster state. This ensures for example that
an index creation request with a low (ack) timeout value does not return before the cluster state
that contains information about the newly created index is even committed.
Packaging tests are occasionally failing (#30295) because of very slow index
template creation. It looks like the slow part is updating the on-disk cluster
state, and this change will help to confirm this.
We currently have a specific REST action to retrieve all aliaes, which
uses internally the get index API. This doesn't seem to be required
anymore though as the existing RestGetAliaesAction could as well take
the requests with no indices and aliases specified.
This commit removes the RestGetAllAliasesAction in favour of using
RestGetAliasesAction also for requests that don't specify indices nor
aliases. Similar to #31129.
Cross-cluster search selects a subset of nodes for each remote cluster
and sends requests only to them, which will act as a proxy and properly
redirect such requests to the target nodes that hold the relevant data.
What happens today is that every time we send a request to a remote
cluster, it will be sent to the next node in the proxy list
(in round-robin fashion), regardless of whether the target node is
already amongst the ones that we are connected to. In case for instance
we need to send a shard search request to a data node that's also one of
the selected proxy nodes, we may end up sending the request to it
through one of the other proxy nodes.
This commit optimizes this case to make sure that whenever we are
already connected to a remote node, we will send a direct request rather
than using the next proxy node.
There is a side-effect to this, which is that round-robin will be a bit
unbalanced as the data nodes that are also selected as proxies will
receive more requests.
We have some use cases for an index setting to only be manageable by
dedicated APIs rather than be updateable via the update settings
API. This commit adds the notion of an internal index setting. Such
settings can be set on create index requests, they can not be changed
via the update settings API, yet they can be changed by action on behalf
of or triggered by the user via dedicated APIs.
With #29331 we added support for the cluster health API to the
high-level REST client. The transport client does not support the level
parameter, and it always returns all the info needed for shards level
rendering. We have maintained that behaviour when adding support for
cluster health to the high-level REST client, to ease migration, but the
correct thing to do is to default the high-level REST client to
`cluster` level, which is the same default as when going through the
Elasticsearch REST layer.
If the publishing of a cluster state to a node fails, we currently only log it as debug information and
only on the master. This makes it hard to see the cause of (test) failures when logging is set to
default levels. This PR adds a warn level log on the node receiving the cluster state when it fails to
deserialise the cluster state and a warn level log on the master with a list of nodes for which
publication failed.
Today, if GET /_cluster/health?wait_for_active_shards=all does not immediately
succeed then it throws an exception due to an erroneous and unnecessary call to
ActiveShardCount#enoughShardsActive(). This commit fixes this logic.
Fixes#31151
TransportAction has many variants of execute. One of those variants
executes by returning a future, which is then often blocked on by
calling get(). This commit removes this variant of execute, instead
using a helper method for tests that want to block, or having tests
pass in a PlainActionFuture directly as a listener.
Co-authored-by: Simon Willnauer <simonw@apache.org>
Here is the problem: if two threads are racing and one hits a failure
freeing a context and the other succeeded, we can expose the value of
the has failure marker to the succeeding thread before the failing
thread has had a chance to set the failure marker. This is a problem if
the failing thread counted down the expected number of operations, then
be put to sleep by a gentle lullaby from the OS, and then the other
thread could count down to zero. Since the failing thread did not get to
set the failure marker, the succeeding thread would respond that the
clear scroll succeeded and that makes that thread a liar. This commit
addresses by first setting the failure marker before we potentially
expose its value to another thread.
Given the weirdness of the response returned by the get alias API, we went for a client specific response, which allows us to hold the error message, exception and status returned as part of the response together with aliases. See #30536 .
Relates to #27205
This adds a thread interrupter that allows us to encapsulate calls to org.joni.Matcher#search()
This method can hang forever if the regex expression is too complex.
The thread interrupter in the background checks every 3 seconds whether there are threads
execution the org.joni.Matcher#search() method for longer than 5 seconds and
if so interrupts these threads.
Joni has checks that that for every 30k iterations it checks if the current thread is interrupted and
if so returns org.joni.Matcher#INTERRUPTED
Closes#28731
This filesystem needs to be suppressed during these tests because it
adds random files to the directory upon directory creation. That means
that the size of these directories is off from what we expect them to
be. Rather than loosening the assertion which could hide bugs on real
directories, this commit suppresses this file system in this test suite.
This removes the abstract `getTranslog` method in `Engine`, instead leaving it
to the abstract implementations of the other methods that use the translog. This
allows future Engines not to have a Translog, as instead they must implement the
methods that use the translog pieces to return necessary values.
This test was failing from time to time due to a ConcurrentModificationException, which
was triggered due to the primary-replica resync running concurrently with shards being
removed.
Closes#30767
With `max_concurrent_shard_requests` we used to throttle / limit
the number of concurrent shard requests a high level search request
can execute per node. This had several problems since it limited the
number on a global level based on the number of nodes. This change
now throttles the number of concurrent requests per node while still
allowing concurrency across multiple nodes.
Closes#31192
Previously this was called for the combine script only. This change checks for self references for
init, map, and reduce scripts as well, and adds unit test coverage for the init, map, and combine cases.
* Fully encapsulate LocalCheckpointTracker inside of the engine
This makes the Engine interface not expose the `LocalCheckpointTracker`, instead
exposing the pieces needed (like retrieving the local checkpoint) as individual
methods.
* Remove DocumentFieldMappers#simpleMatchToFullName, as it is duplicative of MapperService#simpleMatchToIndexNames.
* Rename MapperService#simpleMatchToIndexNames -> simpleMatchToFullName for consistency.
* Simplify EsIntegTestCase#assertConcreteMappingsOnAll to accept concrete fields instead of wildcard patterns.
The following analyzers were moved from server module to analysis-common module:
`snowball`, `arabic`, `armenian`, `basque`, `bengali`, `brazilian`, `bulgarian`,
`catalan`, `chinese`, `cjk`, `czech`, `danish`, `dutch`, `english`, `finnish`,
`french`, `galician` and `german`.
Relates to #23658
We moved to 1 shard by default which caused some issues in how many
concurrent shard requests we allow by default. For instance searching
a 5 shard index on a single node will now be executed serially per shard
while we want these cases to have a good concurrency out of the box. This
change moves to `numNodes * 5` which corresponds to the default we used to
have in the previous version.
Relates to #30783Closes#30994
* Initial commit of rest high level exposure of cancel task
* fix javadocs
* address some code review comments
* update branch to use tasks namespace instead of cluster
* High-level client: list tasks failure to not lose nodeId
This commit reworks testing for `ListTasksResponse` so that random
fields insertion can be tested and xcontent equivalence can be checked
too. Proper exclusions need to be configured, and failures need to be
tested separately. This helped finding a little problem, whenever there
is a node failure returned, the nodeId was lost as it was never printed
out as part of the exception toXContent.
* added comment
* merge from master
* re-work CancelTasksResponseTests to separate XContent failure cases from non-failure cases
* remove duplication of logic in parser creation
* code review changes
* refactor TasksClient to support RequestOptions
* add tests for parent task id
* address final PR review comments, mostly formatting and such
This is related to #27260 and #28898. This commit adds the transport-nio
plugin as a random option when running the http smoke tests. As part of
this PR, I identified an issue where cors support was not properly
enabled causing these tests to fail when using transport-nio. This
commit also fixes that issue.
Adds support for `ignore_unmapped` parameter in geo distance sorting,
which is functionally equivalent to specifying an `unmapped_type` in
the field sort.
Closes#28152
Several AcknowledgedResponse implementations only parse the boolean acknowledged
flag and then create an instance of their class using that flag. This can be
simplified by adding this basic parser to the superclass, provide a common
helper method and call the appropriate ctor in the fromXContent methods.
This change moves an integration test that relies on setting
the value of a static variable (boolean max clause count) to
an unit test where we are sure that the same jvm is used to access
the static variable.
By default span_multi query will limit term expansions = boolean max clause.
This will limit high heap usage in case of high cardinality term
expansions. This applies only if top_terms_N is not used in inner multi
query.
This is related to #28898. This commit adds the acceptor thread name to
the method checking if this thread is a transport thread. Additionally,
it modifies the nio http transport to use the same worker name as the
netty4 http server transport.
This is related to #27260. This commit combines the AcceptingSelector
and SocketSelector classes into a single NioSelector. This change
allows the same selector to handle both server and socket channels. This
is valuable as we do not necessarily want a dedicated thread running for
accepting channels.
With this change, this commit removes the configuration for dedicated
accepting selectors for the normal transport class. The accepting
workload for new node connections is likely low, meaning that there is
no need to dedicate a thread to this process.
Currently the engine is initialized with a hardcoded 256MB of RAM. Elasticsearch
may never use more than that for a given shard, `IndexingMemoryController` only
has the power to flush segments to disk earlier in case multiple shards are
actively indexing and use too much memory.
While this amount of memory is enough for an index with few fields and larger
RAM buffers are not expected to improve indexing speed, this might actually be
little for an index that has many fields.
Kudos to @bleskes for finding it out when looking into a user who was reporting
a **much** slower indexing speed when upgrading from 2.x to 5.6 with an index
that has about 20,000 fields.
We currently have a specific REST action to retrieve all indices and types mappings, which used internally the get index API. This doesn't seem to be required anymore though as the existing RestGetMappingAction could as well take the requests with no indices and types specified.
This commit removes the RestGetAllMappingsAction in favour of using RestGetMappingAction also for requests that don't specify indices nor types.
The Index Audit trail allows the override of the template index
settings with settings specified on the conf file.
A bug will manifest when such conf file settings are specified
for templates that need to be upgraded. The bug is an endless
upgrade loop because the upgrade, although successful, is
not reckoned as such by the upgrade service.
move `finger_print`, `pattern` and `standard_html_strip` analyzers
to analysis-common module. (both AnalysisProvider and PreBuiltAnalyzerProvider)
Changed PreBuiltAnalyzerProviderFactory to extend from PreConfiguredAnalysisComponent and
changed to make sure that predefined analyzers are always instantiated with the current
ES version and if an instance is requested for a different version then delegate to PreBuiltCache.
This is similar to the behaviour that exists today in AnalysisRegistry.PreBuiltAnalysis and
PreBuiltAnalyzerProviderFactory. (#31095)
Relates to #23658
This is related to #28898. This commit adds cors support to the nio http
transport. Most of the work is copied directly from the netty module
implementation. Additionally, this commit adds tests for the nio http
channel.
When the last indexing operation is completed, we will fire a global
checkpoint sync. Since a global checkpoint sync request is a replication
request, it will acquire an index shard permit on the primary when
executing. If this happens at the same time while we are issuing the
synced-flush, the synced-flush request will fail as it thinks there are
in-flight operations. We can avoid such situation by retrying another
synced-flush if the current request fails due to ongoing operations on
the primary.
Closes#29392
This commit adds a new writeBlobAtomic() method to the BlobContainer
interface that can be implemented by repository implementations which
support atomic writes operations.
When the BlobContainer implementation does not provide a specific
implementation of writeBlobAtomic(), then the writeBlob() method is used.
Related to #30680
This will be necessary for the `docvalue_fields` option to work correctly once
we use the field's doc-value format to format doc-value fields. Binary values
are formatted as base64-encoded strings.
In spite of the existing caching, I have seen a number of nodes hot threads
where one thread had been spending all its cpu on computing the size of a
directory. I am proposing to move the computation of the size of the directory
to `StoreDirectory` in order to skip recomputing the size of the directory if
no changes have been made. This should help with users that have read-only
indices, which is very common for time-based indices.
Currently this class takes care of moth selecting the relevant value, and
replacing missing values if any. This is fine for sorting, which always needs
to do both at the same time, but we also have a number of aggregations and
script utils that need to retain information about missing values so this change
proposes to decouple selection of the relevant value and replacement of missing
values.
* Fix index prefixes to work with span_multi
Text fields that use `index_prefixes` can rewrite `prefix` queries into
`term` queries internally. This commit fix the handling of this rewriting
in the `span_multi` query.
This change also copies the index options of the text field into the
prefix field in order to be able to run positional queries. This is mandatory
for `span_multi` to work but this could also be useful to optimize `match_phrase_prefix`
queries in a follow up. Note that this change can only be done on indices created
after 6.3 since we set the index options to doc only in this version.
Fixes#31056
ObjectParser should throw XContentParseExceptions, not IAE. A dedicated parsing
exception can includes the place where the error occurred.
Closes#30605
This snapshot includes:
- LUCENE-8341: Record soft deletes in SegmentCommitInfo which will resolve#30851
- LUCENE-8335: Enforce soft-deletes field up-front
When `lenient=false`, attempts to create match phrase queries with custom analyzers against non-text fields will throw an IllegalArgumentException.
Also changes `*Match*QueryBuilderTests` so that it avoids this scenario
Fixes#31061
The majority of Responses inheriting from AcknowledgeResponse implement
the readFrom and writeTo serialization method in the same way. Moving this
as a default into AcknowledgeResponse and letting the few exceptions that
need a slightly different implementation handle this themselves saves a lot
of duplication.
Specifying `index_phrases: true` on a text field mapping will add a subsidiary
[field]._index_phrase field, indexing two-term shingles from the parent field.
The parent analysis chain is re-used, wrapped with a FixedShingleFilter.
At query time, if a phrase match query is executed, the mapping will redirect it
to run against the subsidiary field.
This should trade faster phrase querying for a larger index and longer indexing
times.
Relates to #27049
This commit fixes an issue with
PersistentTasksCustomMetaDataTests#testMinVersionSerialization. There
were two problems here:
- some versions do not have future compatible version (e.g., betas)
- the feature logic was incorrect
With #31020 we introduced the ability for transport clients to indicate what features they support
in order to make sure we don't serialize object to them they don't support. This PR adapts the
serialization logic of persistent tasks to be aware of those features and not serialize tasks that
aren't supported.
Also, a version check is added for the future where we may add new tasks implementations and
need to be able to indicate they shouldn't be serialized both to nodes and clients.
As the implementation relies on the interface of `PersistentTaskParams`, these are no longer
optional. That's acceptable as all current implementation have them and we plan to make
`PersistentTaskParams` more central in the future.
Relates to #30731
We compute a random version and later try to compute the version prior
that random version. If the random version is the earliest version in
our list of versions then it, by definition, does not have a previous
version. Yet trying to find its previous is someting we do and so the
test fails. This commit adds a version check to the randomization so
that we do not select the earliest version in our list.
This is related to #31017. That issue identified that these three http
methods were treated like GET requests. This commit adds them to
RestRequest. This means that these methods will be handled properly and
generate 405s.
This commit introduces the ability for a client to communicate to the
server features that it can support and for these features to be used in
influencing the decisions that the server makes when communicating with
the client. To this end we carry the features from the client to the
underlying stream as we carry the version of the client today. This
enables us to enhance the logic where we make protocol decisions on the
basis of the version on the stream to also make protocol decisions on
the basis of the features on the stream. With such functionality, the
client can communicate to the server if it is a transport client, or if
it has, for example, X-Pack installed. This enables us to support
rolling upgrades from the OSS distribution to the default distribution
without breaking client connectivity as we can now elect to serialize
customs in the cluster state depending on whether or not the client
reports to us using the feature capabilities that it can under these
customs. This means that we would avoid sending a client pieces of the
cluster state that it can not understand. However, we want to take care
and always send the full cluster state during node-to-node communication
as otherwise we would end up with different understanding of what is in
the cluster state across nodes depending on which features they reported
to have. This is why when deciding whether or not to write out a custom
we always send the custom if the client is not a transport client and
otherwise do not send the custom if the client is transport client that
does not report to have the feature required by the custom.
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
With the default distribution changing in 6.3, clusters might now contain custom metadata that a
pure OSS transport client cannot deserialize. As this can break transport clients when accessing
the cluster state or reroute APIs, we've decided to exclude any custom metadata that the transport
client might not be able to deserialize. This will ensure compatibility between a < 6.3 transport
client and a 6.3 default distribution cluster. Note that this PR only covers interoperability with older
clients, another follow-up PR will cover full interoperability for >= 6.3 transport clients where we will
make it possible again to get the custom metadata from the cluster state.
Relates to #30731
This change adds an option named `split_queries_on_whitespace` to the `keyword`
field type. When set to true full text queries (`match`, `multi_match`, `query_string`, ...) that target the field will split the input on whitespace to build the query terms. Defaults to `false`.
Closes#30393
The randomized alias names could contain unicode controll charactes that don't
survive an xContent rendering and parsing roundtrip when using the YAML xContent
type. This fix filters the randomized unicode string for control characters to
avoid this particular problem.
Closes#30911
In case an error is returned when calling search_shards on a remote
cluster, which will lead to throwing an exception in the coordinating
node, we should make sure that the status code returned by the
coordinating node is the same as the one returned by the remote
cluster. Up until now a 500 - Internal Server Error was always
returned. This commit changes this behaviour so that for instance if an
index is not found, which causes an 404, a 404 is also returned by the
coordinating node to the client.
Closes#27461
This commit reworks testing for `ListTasksResponse` so that random
fields insertion can be tested and xcontent equivalence can be checked
too. Proper exclusions need to be configured, and failures need to be
tested separately. This helped finding a little problem, whenever there
is a node failure returned, the nodeId was lost as it was never printed
out as part of the exception toXContent.
This is related to #30141. Right now in the transport client we open a
temporary node connection and take the node information. This node
information is used to open a permanent connection that is used for the
client. However, we continue to use the configured transport address.
If the configured transport address is a load balancer, you might
connect to a different node for the permanent connection. This causes
the handshake validation to fail. This commit removes the handshake
validation for the transport client when it simple node sample mode.
Since master will always communicate with a >=6.4 node, the logic for
checking if the node is 6.4 and conditionally reading and writing based
on that can be removed from master. This logic will stay in 6.x as it is
the bridge to the cleaner response in master. This also unmutes the
failing test due to this bwc change.
Closes#30807
This commit removes the RequestBuilder generic type from Action. It was
needed to be used by the newRequest method, which in turn was used by
client.prepareExecute. Both of these methods are now removed, along with
the existing users of prepareExecute constructing the appropriate
builder directly.
This change deprecates completion queries and documents without context that target a
context enabled completion field. Querying without context degrades the search
performance considerably (even when the number of indexed contexts is low).
This commit targets master but the deprecation will take place in 6.x and the functionality
will be removed in 7 in a follow up.
Closes#29222
This commit adds Verify Repository, the associated docs and tests for
the high level REST API client. A few small changes to the Verify
Repository Response went into the commit as well.
Relates #27205
Currently failures to compile a script usually lead to a ScriptException, which
inherits the 500 INTERNAL_SERVER_ERROR from ElasticsearchException if it does
not contain another root cause. Instead, this should be a 400 Bad Request error.
This PR changes this more generally for script compilation errors by changing
ScriptException to return 400 (bad request) as status code.
Closes#12315
When we are connecting to a remote cluster we should never select
dedicated master nodes as gateway nodes, or we will end up loading them
with requests that should rather go to other type of nodes e.g. data
nodes or coord_only nodes.
This commit adds the selection based on the node role, to the existing
selection based on version and potential node attributes.
Closes#30687
AliasMetaData should be parsed more leniently so that the high-level REST client can support forward compatibility on it. This commit addresses this issue that was found as part of #28799 and adds dedicated XContent tests as well.
With multiple data paths, we write the state files for index metadata to all data paths. We only properly fsync on the first location, though. For other locations, we possibly expose the file before its contents is properly fsynced. This can lead to situations where, after a crash, and where the first data path is not available anymore, ES will see a partially-written state file, preventing the node to start up.
This change adds a new option to the composite aggregation named `missing_bucket`.
This option can be set by source and dictates whether documents without a value for the
source should be ignored. When set to true, documents without a value for a field emits
an explicit `null` value which is then added in the composite bucket.
The `missing` option that allows to set an explicit value (instead of `null`) is deprecated in this change and will be removed in a follow up (only in 7.x).
This commit also changes how the big arrays are allocated, instead of reserving
the provided `size` for all sources they are created with a small intial size and they grow
depending on the number of buckets created by the aggregation:
Closes#29380
This commit renames methods in the PersistentTasksService, to
make obvious that the methods send requests in order to change
the state of persistent tasks.
Relates to #29608.
* Make sure all instance variables are final.
* Make generateKey a private static method, instead of protected.
* Rename formatter -> format for consistency.
* Serialize bucket keys as strings as opposed to optional strings.
* Pull the stream serialization logic for buckets into the Bucket class.
Currently AbstractHttpServerTransport is in a netty4 module. This is the
incorrect location. This commit moves it out of netty4 module.
Additionally, it moves unit tests that test AbstractHttpServerTransport
logic to server.
We failed to register "aliases" and "version" into the list of keywords
in the IndexTemplateMetaData; then fail to parse the following index
template.
```
{
"aliases": {"log": {}},
"index_patterns": ["pattern-1"]
}
```
This commit registers that missing keywords.
The stored scripts API today accepts malformed requests instead of throwing an exception.
This PR deprecates accepting malformed put stored script requests (requests not using the official script format).
Relates to #27612
This change replaces some existing try-finally statements that close resources
in their finally block with the slightly shorter and safer try-with-resources
pattern.
This commit removes the method AllocatedPersistentTask.getState() that
exposes the internal state of an AllocatedPersistentTask and replaces
it with a new isCompleted() method. Related to #29608.
Include size of snapshot in snapshot metadata
Adds difference of number of files (and file sizes) between prev and current snapshot. Total number/size reflects total number/size of files in snapshot.
Closes#18543
The BWC version was previously at 7.0, because the 6.x backport had not
yet landed. Now that it has landed, this commit replaces the BWC compat
with the real version, 6.4.0.
Relates #30762
We sign our official plugins yet this is not well-advertised and not at
all consumed during plugin installation. For plugins that are installed
over the intertubes, verifying that the downloaded artifact is signed by
our signing key would establish both integrity and validity of the
downloaded artifact. The chain of trust here is simple: our installable
artifacts (archive and package distributions) so that if a user trusts
our packages via their signatures, and our plugin installer (which would
be executing trusted code) verifies the downloaded plugin, then the user
can trust the downloaded plugin too. This commit adds verification of
official plugins downloaded during installation. We do not add
verification for offline plugin installs; a user can download our
signatures and verify the artifacts themselves.
This commit also needs to solve a few interesting challenges. One of
these is that we want the bouncy castle JARs on the classpath only for
the plugin installer, but not for the runtime
Elasticsearch. Additionally, we want these JARs to not be present for
the JAR hell checks. To address this, we shift these JARs into a
sub-directory of lib (lib/tools/plugin-cli) that is only loaded for the
plugin installer, and in the plugin installer we filter any JARs in this
directory from the JAR hell check.
The writeTo method of VerifyRepositoryResponse incorrectly used its
local version to determine what it was receiving, rather than the
sender's version. This fixes a bug that ocassionally happened when a 6.4
master node sent data to a 7.0 client, causing the number of bytes to be
improperly read. This also unmutes the test.
Closes#30807
Currently nio and netty modules use the CompletableFuture class for
managing listeners. This is unfortunate as that class accepts
Throwable. This commit adds a class CompletableContext that wraps
the CompletableFuture but does not accept Throwable. This allows the
modification of netty and nio logic to no longer handle Throwable.
Treats geohashes as grid cells instead of just points when the
geohashes are used to specify the edges in the geo_bounding_box
query. For example, if a geohash is used to specify the top_left
corner, the top left corner of the geohash cell will be used as the
corner of the bounding box.
Closes#25154
This commit reworks the way our realms perform caching in order to
limit each principal to a single ongoing authentication per realm. In
other words, this means that multiple requests made by the same user
will not trigger more that one authentication attempt at a time if no
entry has been stored in the cache. If an entry is present in our
cache, there is no restriction on the number of concurrent
authentications performed for this user.
This change enables us to limit the load we place on an external system
like an LDAP server and also preserve resources such as CPU on
expensive operations such as BCrypt authentication.
Closes#30355
We now have a remote cluster client exposed which can
talk to a given remote cluster and manages reconnects etc.
This makes code more readable than using the transport layer directly.
Persistent tasks was moved from X-Pack to core in #28455.
However, registration of the named writables and named
X-content was left in X-Pack.
This change moves the registration of the named writables
and named X-content into core. Additionally, the persistent
task actions are no longer registered in the X-Pack client
plugin, as they are already registered in ActionModule.
Today, the `ClusterApplier` and `MasterService` both use the
`ClusterStateTaskListener` interface to notify their callers when asynchronous
activities have completed. However, this is not wholly appropriate: none of the
callers into the `ClusterApplier` care about the `ClusterState` arguments that
they receive. This change introduces a dedicated ClusterApplyListener
interface for callers into the `ClusterApplier`, to distinguish these listeners
from the real `ClusterStateTaskListener`s that are waiting for responses from
the `MasterService`.
This change adds a simple header to the transport client
that is present on the servers thread context that ensures
we can detect if a transport client talks to the server in a
specific request. This change also adds a header for xpack
to detect if the client has xpack installed.
This commit reintroduces 31251c9 and 63a5799. These commits introduced a
memory leak and were reverted. This commit brings those commits back
and fixes the memory leak by removing unnecessary retain method calls.
Colin Goodheart-Smithe
Mayya Sharipova
Alan Woodward
Daniel Mitterdorfer
Igor Motov
Alexander Reelsen
James Baiera
Nhat Nguyen
Sohaib Iftikhar
Christoph Büscher
Tal Levy
Jim Ferenczi
Martijn van Groningen
Tim Brooks
Vladimir Dolzhenko
Simon Willnauer
David Turner
Yannick Welsch
Tanguy Leroux
Jack Conradson
Ioannis Kakavas
Ryan Ernst
markharwood
Alpar Torok
Yu
Jason Tedor
Jonathan Little
Vladimir Dolzhenko
Tom Callahan
Adrien Grand
Luca Cavanna
Julie Tibshirani
Zachary Tong
Albert Zaharovits
Albert Zaharovits
Dimitris Athanasiou
Boaz Leskes
Van0SS
olcbean
Lee Hinman
Paul Sanwald
Jim Ferenczi
Nirmal Chidambaram
Daniel Mitterdorfer
Michael Basnight
Jay Modi
David Roberts