Aggregatable mutli-fields are at the moment wrongly mapped
as normal doc_value fields and thus they support fetching from
source. However, they do not exist in the source. This results
to failure to extract such fields.
This commit fixes this bug. While a fix could be worked out
on top of the existing code, it is evident the extraction logic
has become difficult to understand and maintain. As we also
want to deduplicate multi-fields for data frame analytics,
it seemed appropriate to refactor the code to simplify and
better handle the extraction of multi-fields.
Relates #48756
Backport of #48770
If a job stops right after reindexing is finished but before
we refresh the destination index, we don't refresh at all.
If the job is started again right after, it jumps into the analyzing state.
However, the data is still not searchable.
This is why we were seeing test failures that we start the process
expecting X rows (where X is lower than the expected number of docs)
and we end up getting X+.
We fix this by moving the refresh of the dest index right before
we start the process so it always ensures the data is searchable.
Closes#47612
Backport of #48090
Audit messages are stored with millisecond timestamps. If two
messages have the same millisecond timestamp then asserting on
their order is impossible given the information available.
This PR changes the assertion on audit messages in the native
data frame analytics tests to assert that the expected audit
messages exist in any order.
Fixes#48035
This change adds:
- A new option, allow_lazy_open, to anomaly detection jobs
- A new option, allow_lazy_start, to data frame analytics jobs
Both work in the same way: they allow a job to be
opened/started even if no ML node exists that can
accommodate the job immediately. In this situation
the job waits in the opening/starting state until ML
node capacity is available. (The starting state for data
frame analytics jobs is new in this change.)
Additionally, the ML nightly maintenance tasks now
creates audit warnings for ML jobs that are unassigned.
This means that jobs that cannot be assigned to an ML
node for a very long time will show a yellow warning
triangle in the UI.
A final change is that it is now possible to close a job
that is not assigned to a node without using force.
This is because previously jobs that were open but
not assigned to a node were an aberration, whereas
after this change they'll be relatively common.
Adds a new datafeed config option, max_empty_searches,
that tells a datafeed that has never found any data to stop
itself and close its associated job after a certain number
of real-time searches have returned no data.
Backport of #47922
Adds the following parameters to `outlier_detection`:
- `compute_feature_influence` (boolean): whether to compute or not
feature influence scores
- `outlier_fraction` (double): the proportion of the data set assumed
to be outlying prior to running outlier detection
- `standardization_enabled` (boolean): whether to apply standardization
to the feature values
Backport of #47600
This commit restores the model state if available in data
frame analytics jobs.
In addition, this changes the start API so that a stopped job
can be restarted. As we now store the progress in the state index
when the task is stopped, we can use it to determine what state
the job was in when it got stopped.
Note that in order to be able to distinguish between a job
that runs for the first time and another that is restarting,
we ensure reindexing progress is reported to be at least 1
for a running task.
Backport of #45794 to 7.x. Convert most `awaitBusy` calls to
`assertBusy`, and use asserts where possible. Follows on from #28548 by
@liketic.
There were a small number of places where it didn't make sense to me to
call `assertBusy`, so I kept the existing calls but renamed the method to
`waitUntil`. This was partly to better reflect its usage, and partly so
that anyone trying to add a new call to awaitBusy wouldn't be able to find
it.
I also didn't change the usage in `TransportStopRollupAction` as the
comments state that the local awaitBusy method is a temporary
copy-and-paste.
Other changes:
* Rework `waitForDocs` to scale its timeout. Instead of calling
`assertBusy` in a loop, work out a reasonable overall timeout and await
just once.
* Some tests failed after switching to `assertBusy` and had to be fixed.
* Correct the expect templates in AbstractUpgradeTestCase. The ES
Security team confirmed that they don't use templates any more, so
remove this from the expected templates. Also rewrite how the setup
code checks for templates, in order to give more information.
* Remove an expected ML template from XPackRestTestConstants The ML team
advised that the ML tests shouldn't be waiting for any
`.ml-notifications*` templates, since such checks should happen in the
production code instead.
* Also rework the template checking code in `XPackRestTestHelper` to give
more helpful failure messages.
* Fix issue in `DataFrameSurvivesUpgradeIT` when upgrading from < 7.4
When the ML native multi-node tests use _cat/indices/_all
and the request goes to a non-master node, _all is
translated to a list of concrete indices by the authz layer
on the coordinating node before the request is forwarded
to the master node. Then it is possible for the master
node to return an index_not_found_exception if one of
the concrete indices that was expanded on the
coordinating node has been deleted in the meantime.
(#47159 has been opened to track the underlying problem.)
It has been observed that the index that gets deleted when
the problem affects the ML native multi-node tests is
always the ML notifications index. The tests that fail are
only interested in the presence or absense of ML results
indices. Therefore the workaround is to only _cat indices
that match the ML results index pattern.
Fixes#45652
This commit reuses the same state processor that is used for autodetect
to parse state output from data frame analytics jobs. We then index the
state document into the state index.
Backport of #46804
It is possible for a running analytics job that its config is removed
from the '.ml-config' index (perhaps the user deleted the entire index,
etc.). In that case the task remains without a matching config. I have
raised #46781 to discuss how to deal with this issue.
This commit focuses on `MlMemoryTracker` and changes it so that when
we get the configs for the running tasks we leniently ignore missing ones.
This at least means memory tracking will keep working for other jobs
if one or more are missing.
In addition, this commit makes the cleanup code for native analytics
tests more robust by explicitly stopping all jobs and force-stopping
if an error occurs. This helps so that a single failing test does
not cause other tests fail due to pending tasks.
Backport of #46789
After starting the analytics job and checking its state
the state can be any of "started", "reindexing" or
"analyzing" depending on how quickly the work is done.
This refactors `DataFrameAnalyticsTask` into its own class.
The task has quite a lot of functionality now and I believe it would
make code more readable to have it live as its own class rather than
an inner class of the start action class.
Backport of #46402
The test seems to have been failing due to a race condition between
stopping the task and refreshing the destination index. In particular,
we were going forward with refreshing the destination index even
though the task stopped in the meantime. This was fixed in
request.
Closes#43960
Backport of #46271
Adds a parameter `training_percent` to regression. The default
value is `100`. When the parameter is set to a value less than `100`,
from the rows that can be used for training (ie. those that have a
value for the dependent variable) we randomly choose whether to actually
use for training. This enables splitting the data into a training set and
the rest, usually called testing, validation or holdout set, which allows
for validating the model on data that have not been used for training.
Technically, the analytics process considers as training the data that
have a value for the dependent variable. Thus, when we decide a training
row is not going to be used for training, we simply clear the row's
dependent variable.
The native process requires that there be a non-zero number of rows to analyze. If the flag --rows 0 is passed to the executable, it throws and does not start.
When building the configuration for the process we should not start the native process if there are no rows.
Adding some logging to indicate what is occurring.
Previously, the stats API reports a progress percentage
for DF analytics tasks that are running and are in the
`reindexing` or `analyzing` state.
This means that when the task is `stopped` there is no progress
reported. Thus, one cannot distinguish between a task that never
run to one that completed.
In addition, there are blind spots in the progress reporting.
In particular, we do not account for when data is loaded into the
process. We also do not account for when results are written.
This commit addresses the above issues. It changes progress
to being a list of objects, each one describing the phase
and its progress as a percentage. We currently have 4 phases:
reindexing, loading_data, analyzing, writing_results.
When the task stops, progress is persisted as a document in the
state index. The stats API now reports progress from in-memory
if the task is running, or returns the persisted document
(if there is one).
Regression analysis support missing fields. Even more, it is expected
that the dependent variable has missing fields to the part of the
data frame that is not for training.
This commit allows to declare that an analysis supports missing values.
For such analysis, rows with missing values are not skipped. Instead,
they are written as normal with empty strings used for the missing values.
This also contains a fix to the integration test.
Closes#45425
* [ML] better handle empty results when evaluating regression
* adding new failure test to ml_security black list
* fixing equality check for regression results
* Reenable Integ Tests in native-multi-node-tests
* The tests broken here were likely fixed by #45463 => let's reenable them and see if things run fine again
* Relates #45405, #45455
This commit adds a first draft of a regression analysis
to data frame analytics. There is high probability that
the exact syntax might change.
This commit adds the new analysis type and its parameters as
well as appropriate validation. It also modifies the extractor
and the fields detector to be able to handle categorical fields
as regression analysis supports them.
If one tries to start a DF analytics job that has already run,
the result will be that the task will fail after reindexing the
dest index from the source index. The results of the prior run
will be gone and the task state is not properly set to failed
with the failure reason.
This commit improves the behavior in this scenario. First, we
set the task state to `failed` in a set of failures that were
missed. Second, a validation is added that if the destination
index exists, it must be empty.
As data frame rows with missing values for analyzed fields are skipped,
we can be more efficient by including a query that only picks documents
that have values for all analyzed fields. Besides improving the number
of documents we go through, we also provide a more accurate measurement
of how many rows we need which reduces the memory requirements.
This also adds an integration test that runs outlier detection on data
with missing fields.
* Switch from using docvalue_fields to extracting values from _source
where applicable. Doing this means parsing the _source and handling the
numbers parsing just like Elasticsearch is doing it when it's indexing
a document.
* This also introduces a minor limitation: aliases type of fields that
are NOT part of a tree of sub-fields will not be able to be retrieved
anymore. field_caps API doesn't shed any light into a field being an
alias or not and at _source parsing time there is no way to know if a
root field is an alias or not. Fields of the type "a.b.c.alias" can be
extracted from docvalue_fields, only if the field they point to can be
extracted from docvalue_fields. Also, not all fields in a hierarchy of
fields can be evaluated to being an alias.
(cherry picked from commit 8bf8a055e38f00df5f49c8d97f632f69d6e00c2c)
* Mute failing test
tracked in #44552
* mute EvilSecurityTests
tracking in #44558
* Fix line endings in ESJsonLayoutTests
* Mute failing ForecastIT test on windows
Tracking in #44609
* mute BasicRenormalizationIT.testDefaultRenormalization
tracked in #44613
* fix mute testDefaultRenormalization
* Increase busyWait timeout windows is slow
* Mute failure unconfigured node name
* mute x-pack internal cluster test windows
tracking #44610
* Mute JvmErgonomicsTests on windows
Tracking #44669
* mute SharedClusterSnapshotRestoreIT testParallelRestoreOperationsFromSingleSnapshot
Tracking #44671
* Mute NodeTests on Windows
Tracking #44256
* Add Snapshot Lifecycle Management (#43934)
* Add SnapshotLifecycleService and related CRUD APIs
This commit adds `SnapshotLifecycleService` as a new service under the ilm
plugin. This service handles snapshot lifecycle policies by scheduling based on
the policies defined schedule.
This also includes the get, put, and delete APIs for these policies
Relates to #38461
* Make scheduledJobIds return an immutable set
* Use Object.equals for SnapshotLifecyclePolicy
* Remove unneeded TODO
* Implement ToXContentFragment on SnapshotLifecyclePolicyItem
* Copy contents of the scheduledJobIds
* Handle snapshot lifecycle policy updates and deletions (#40062)
(Note this is a PR against the `snapshot-lifecycle-management` feature branch)
This adds logic to `SnapshotLifecycleService` to handle updates and deletes for
snapshot policies. Policies with incremented versions have the old policy
cancelled and the new one scheduled. Deleted policies have their schedules
cancelled when they are no longer present in the cluster state metadata.
Relates to #38461
* Take a snapshot for the policy when the SLM policy is triggered (#40383)
(This is a PR for the `snapshot-lifecycle-management` branch)
This commit fills in `SnapshotLifecycleTask` to actually perform the
snapshotting when the policy is triggered. Currently there is no handling of the
results (other than logging) as that will be added in subsequent work.
This also adds unit tests and an integration test that schedules a policy and
ensures that a snapshot is correctly taken.
Relates to #38461
* Record most recent snapshot policy success/failure (#40619)
Keeping a record of the results of the successes and failures will aid
troubleshooting of policies and make users more confident that their
snapshots are being taken as expected.
This is the first step toward writing history in a more permanent
fashion.
* Validate snapshot lifecycle policies (#40654)
(This is a PR against the `snapshot-lifecycle-management` branch)
With the commit, we now validate the content of snapshot lifecycle policies when
the policy is being created or updated. This checks for the validity of the id,
name, schedule, and repository. Additionally, cluster state is checked to ensure
that the repository exists prior to the lifecycle being added to the cluster
state.
Part of #38461
* Hook SLM into ILM's start and stop APIs (#40871)
(This pull request is for the `snapshot-lifecycle-management` branch)
This change allows the existing `/_ilm/stop` and `/_ilm/start` APIs to also
manage snapshot lifecycle scheduling. When ILM is stopped all scheduled jobs are
cancelled.
Relates to #38461
* Add tests for SnapshotLifecyclePolicyItem (#40912)
Adds serialization tests for SnapshotLifecyclePolicyItem.
* Fix improper import in build.gradle after master merge
* Add human readable version of modified date for snapshot lifecycle policy (#41035)
* Add human readable version of modified date for snapshot lifecycle policy
This small change changes it from:
```
...
"modified_date": 1554843903242,
...
```
To
```
...
"modified_date" : "2019-04-09T21:05:03.242Z",
"modified_date_millis" : 1554843903242,
...
```
Including the `"modified_date"` field when the `?human` field is used.
Relates to #38461
* Fix test
* Add API to execute SLM policy on demand (#41038)
This commit adds the ability to perform a snapshot on demand for a policy. This
can be useful to take a snapshot immediately prior to performing some sort of
maintenance.
```json
PUT /_ilm/snapshot/<policy>/_execute
```
And it returns the response with the generated snapshot name:
```json
{
"snapshot_name" : "production-snap-2019.04.09-rfyv3j9qreixkdbnfuw0ug"
}
```
Note that this does not allow waiting for the snapshot, and the snapshot could
still fail. It *does* record this information into the cluster state similar to
a regularly trigged SLM job.
Relates to #38461
* Add next_execution to SLM policy metadata (#41221)
* Add next_execution to SLM policy metadata
This adds the next time a snapshot lifecycle policy will be executed when
retriving a policy's metadata, for example:
```json
GET /_ilm/snapshot?human
{
"production" : {
"version" : 1,
"modified_date" : "2019-04-15T21:16:21.865Z",
"modified_date_millis" : 1555362981865,
"policy" : {
"name" : "<production-snap-{now/d}>",
"schedule" : "*/30 * * * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"foo-*",
"important"
],
"ignore_unavailable" : true,
"include_global_state" : false
}
},
"next_execution" : "2019-04-15T21:16:30.000Z",
"next_execution_millis" : 1555362990000
},
"other" : {
"version" : 1,
"modified_date" : "2019-04-15T21:12:19.959Z",
"modified_date_millis" : 1555362739959,
"policy" : {
"name" : "<other-snap-{now/d}>",
"schedule" : "0 30 2 * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"other"
],
"ignore_unavailable" : false,
"include_global_state" : true
}
},
"next_execution" : "2019-04-16T02:30:00.000Z",
"next_execution_millis" : 1555381800000
}
}
```
Relates to #38461
* Fix and enhance tests
* Figured out how to Cron
* Change SLM endpoint from /_ilm/* to /_slm/* (#41320)
This commit changes the endpoint for snapshot lifecycle management from:
```
GET /_ilm/snapshot/<policy>
```
to:
```
GET /_slm/policy/<policy>
```
It mimics the ILM path only using `slm` instead of `ilm`.
Relates to #38461
* Add initial documentation for SLM (#41510)
* Add initial documentation for SLM
This adds the initial documentation for snapshot lifecycle management.
It also includes the REST spec API json files since they're sort of
documentation.
Relates to #38461
* Add `manage_slm` and `read_slm` roles (#41607)
* Add `manage_slm` and `read_slm` roles
This adds two more built in roles -
`manage_slm` which has permission to perform any of the SLM actions, as well as
stopping, starting, and retrieving the operation status of ILM.
`read_slm` which has permission to retrieve snapshot lifecycle policies as well
as retrieving the operation status of ILM.
Relates to #38461
* Add execute to the test
* Fix ilm -> slm typo in test
* Record SLM history into an index (#41707)
It is useful to have a record of the actions that Snapshot Lifecycle
Management takes, especially for the purposes of alerting when a
snapshot fails or has not been taken successfully for a certain amount of
time.
This adds the infrastructure to record SLM actions into an index that
can be queried at leisure, along with a lifecycle policy so that this
history does not grow without bound.
Additionally,
SLM automatically setting up an index + lifecycle policy leads to
`index_lifecycle` custom metadata in the cluster state, which some of
the ML tests don't know how to deal with due to setting up custom
`NamedXContentRegistry`s. Watcher would cause the same problem, but it
is already disabled (for the same reason).
* High Level Rest Client support for SLM (#41767)
* High Level Rest Client support for SLM
This commit add HLRC support for SLM.
Relates to #38461
* Fill out documentation tests with tags
* Add more callouts and asciidoc for HLRC
* Update javadoc links to real locations
* Add security test testing SLM cluster privileges (#42678)
* Add security test testing SLM cluster privileges
This adds a test to `PermissionsIT` that uses the `manage_slm` and `read_slm`
cluster privileges.
Relates to #38461
* Don't redefine vars
* Add Getting Started Guide for SLM (#42878)
This commit adds a basic Getting Started Guide for SLM.
* Include SLM policy name in Snapshot metadata (#43132)
Keep track of which SLM policy in the metadata field of the Snapshots
taken by SLM. This allows users to more easily understand where the
snapshot came from, and will enable future SLM features such as
retention policies.
* Fix compilation after master merge
* [TEST] Move exception wrapping for devious exception throwing
Fixes an issue where an exception was created from one line and thrown in another.
* Fix SLM for the change to AcknowledgedResponse
* Add Snapshot Lifecycle Management Package Docs (#43535)
* Fix compilation for transport actions now that task is required
* Add a note mentioning the privileges needed for SLM (#43708)
* Add a note mentioning the privileges needed for SLM
This adds a note to the top of the "getting started with SLM"
documentation mentioning that there are two built-in privileges to
assist with creating roles for SLM users and administrators.
Relates to #38461
* Mention that you can create snapshots for indices you can't read
* Fix REST tests for new number of cluster privileges
* Mute testThatNonExistingTemplatesAreAddedImmediately (#43951)
* Fix SnapshotHistoryStoreTests after merge
* Remove overridden newResponse functions that have been removed
* Fix compilation for backport
* Fix get snapshot output parsing in test
* [DOCS] Add redirects for removed autogen anchors (#44380)
* Switch <tt>...</tt> in javadocs for {@code ...}
Test clusters currently has its own set of logic for dealing with
finding different versions of Elasticsearch, downloading them, and
extracting them. This commit converts testclusters to use the
DistributionDownloadPlugin.
* HLRC: Fix '+' Not Correctly Encoded in GET Req.
* Encode `+` correctly as `%2B` in URL paths
* Keep encoding `+` as space in URL parameters
* Closes#33077
Renames `_id_copy` to `ml__id_copy` as field names starting with
underscore are deprecated. The new field name `ml__id_copy` was
chosen as an obscure enough field that users won't have in their data.
Otherwise, this field is only intented to be used by df-analytics.
If a job is opened and then closed and does nothing in
between then it should not persist any results or state
documents. This change adapts the no-op job test to
assert no results in addition to no state, and to log
any documents that cause this assertion to fail.
Relates elastic/ml-cpp#512
Relates #43680
This commit adds support for multiple source indices.
In order to deal with multiple indices having different mappings,
it attempts a best-effort approach to merge the mappings assuming
there are no conflicts. In case conflicts exists an error will be
returned.
To allow users creating custom mappings for special use cases,
the destination index is now allowed to exist before the analytics
job runs. In addition, settings are no longer copied except for
the `index.number_of_shards` and `index.number_of_replicas`.
This merges the initial work that adds a framework for performing
machine learning analytics on data frames. The feature is currently experimental
and requires a platinum license. Note that the original commits can be
found in the `feature-ml-data-frame-analytics` branch.
A new set of APIs is added which allows the creation of data frame analytics
jobs. Configuration allows specifying different types of analysis to be performed
on a data frame. At first there is support for outlier detection.
The APIs are:
- PUT _ml/data_frame/analysis/{id}
- GET _ml/data_frame/analysis/{id}
- GET _ml/data_frame/analysis/{id}/_stats
- POST _ml/data_frame/analysis/{id}/_start
- POST _ml/data_frame/analysis/{id}/_stop
- DELETE _ml/data_frame/analysis/{id}
When a data frame analytics job is started a persistent task is created and started.
The main steps of the task are:
1. reindex the source index into the dest index
2. analyze the data through the data_frame_analyzer c++ process
3. merge the results of the process back into the destination index
In addition, an evaluation API is added which packages commonly used metrics
that provide evaluation of various analysis:
- POST _ml/data_frame/_evaluate
This trace logging looks like it was copy/pasted from another test,
where the logging in that test was only added to investigate a test
failure. This commit removes the trace logging.
* [ML] Adding support for geo_shape, geo_centroid, geo_point in datafeeds
* only supporting doc_values for geo_point fields
* moving validation into GeoPointField ctor
Get resources action sorts on the resource id. When there are no resources at
all, then it is possible the index does not contain a mapping for the resource
id field. In that case, the search api fails by default.
This commit adjusts the search request to ignore unmapped fields.
Closeselastic/kibana#37870
Re-enable muted tests and accommodate recent backend changes
that result in higher memory usage being reported for a job
at the start of its life-cycle
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
Muting a number of AutoDetectMemoryLimitIT tests to give CI a chance to
settle before easing in required backend changes.
relates elastic/ml-cpp#486
relates #42086
* [ML] Add validation that rejects duplicate detectors in PutJobAction
Closes#39704
* Add YML integration test for duplicate detectors fix.
* Use "== false" comparison rather than "!" operator.
* Refine error message to sound more natural.
* Put job description in square brackets in the error message.
* Use the new validation in ValidateJobConfigAction.
* Exclude YML tests for new validation from permission tests.
Ensure that there is at least a 1s delay between the time that state
is persisted by each of the two jobs in the test.
Model snapshot IDs use the current time in epoch seconds to
distinguish themselves, hence snapshots will be overwritten
by another if it occurs in the same 1s window.
Closes#40347
* [ML] Refactor common utils out of ML plugin to XPack.Core
* implementing GET filters with abstract transport
* removing added rest param
* adjusting how defaults can be supplied
The problem here was that `DatafeedJob` was updating the last end time searched
based on the `now` even though when there are aggregations, the extactor will
only search up to the floor of `now` against the histogram interval.
This commit fixes the issue by using the end time as calculated by the extractor.
It also adds an integration test that uses aggregations. This test would fail
before this fix. Unfortunately the test is slow as we need to wait for the
datafeed to work in real time.
Closes#39842
* [ML] refactoring lazy query and agg parsing
* Clean up and addressing PR comments
* removing unnecessary try/catch block
* removing bad call to logger
* removing unused import
* fixing bwc test failure due to serialization and config migrator test
* fixing style issues
* Adjusting DafafeedUpdate class serialization
* Adding todo for refactor in v8
* Making query non-optional so it does not write a boolean byte
Investigating how to make DeleteExpiredDataIT faster, it was
revealed that the security audit trail threads were quite hot.
Disabling that seems to be helping quite a bit with making this
test faster. This commit also unmutes the test to see how it goes
with the audit trail disabled.
Relates #39658Closes#39575
ML has historically used doc as the single mapping type but reindex in 7.x
will change the mapping to _doc. Switching to the typeless APIs handles
case where the mapping type is either doc or _doc. This change removes
deprecated typed usages.
This commit parallelizes some parts of the test
and its remove an unnecessary refresh call.
On my local machine it shaves off about 15 seconds
for a test execution time of ~64s (down from ~80s).
This test is still slow but progress over perfection.
Relates #37339
The ScheduledEvent class has never preserved the time
zone so it makes more sense for it to store the start and
end time using Instant rather than ZonedDateTime.
Closes#38620
The assertBusy() that waits the default 10 seconds for a
datafeed to complete very occasionally times out on slow
machines. This commit increases the timeout to 60 seconds.
It will almost never actually take this long, but it's
better to have a timeout that will prevent time being
wasted looking at spurious test failures.
This test failed once in a very long time with the assertion
that there is no document for the `non_existing_job` in the
state index. I could not see how that is possible and I cannot
reproduce. With this commit the failure message will reveal
some examples of the left behind docs which might shed a light
about what could go wrong.
* Fix#38623 remove xpack namespace REST API
Except for xpack.usage and xpack.info API's, this moves the last remaining API's out of the xpack namespace
* rename xpack api's inside inside the files as well
* updated yaml tests references to xpack namespaces api's
* update callsApi calls in the IT subclasses
* make sure docs testing does not use xpack namespaced api's
* fix leftover xpack namespaced method names in docs/build.gradle
* found another leftover reference
(cherry picked from commit ccb5d934363c37506b76119ac050a254fa80b5e7)
* ML: Add MlMetadata.upgrade_mode and API
* Adding tests
* Adding wait conditionals for the upgrade_mode call to return
* Adding tests
* adjusting format and tests
* Adjusting wait conditions for api return and msgs
* adjusting doc tests
* adding upgrade mode tests to black list
We have read and write aliases for the ML results indices. However,
the job still had methods that purported to reliably return the name
of the concrete results index being used by the job. After reindexing
prior to upgrade to 7.x this will be wrong, so the method has been
renamed and the comments made more explicit to say the returned index
name may not be the actual concrete index name for the lifetime of the
job. Additionally, the selection of indices when deleting the job
has been changed so that it works regardless of concrete index names.
All these changes are nice-to-have for 6.7 and 7.0, but will become
critical if we add rolling results indices in the 7.x release stream
as 6.7 and 7.0 nodes may have to operate in a mixed version cluster
that includes a version that can roll results indices.
* Remove empty statements
There are a couple of instances of undocumented empty statements all across the
code base. While they are mostly harmless, they make the code hard to read and
are potentially error-prone. Removing most of these instances and marking blocks
that look empty by intention as such.
* Change test, slightly more verbose but less confusing
* Use ILM for Watcher history deletion
This commit adds an index lifecycle policy for the `.watch-history-*` indices.
This policy is automatically used for all new watch history indices.
This does not yet remove the automatic cleanup that the monitoring plugin does
for the .watch-history indices, and it does not touch the
`xpack.watcher.history.cleaner_service.enabled` setting.
Relates to #32041
This commit moves the aggregation and mapping code from joda time to
java time. This includes field mappers, root object mappers, aggregations with date
histograms, query builders and a lot of changes within tests.
The cut-over to java time is a requirement so that we can support nanoseconds
properly in a future field mapper.
Relates #27330
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
* ML: Updating .ml-state calls to be able to support > 1 index
* Matching bulk delete behavior with dbq
* Adjusting state name
* refreshing indices before search
* fixing line length
* adjusting index expansion options
Added warnings checks to existing tests
Added “defaultTypeIfNull” to DocWriteRequest interface so that Bulk requests can override a null choice of document type with any global custom choice.
Related to #35190
* ML: add migrate anomalies assistant
* adjusting failure handling for reindex
* Fixing request and tests
* Adding tests to blacklist
* adjusting test
* test fix: posting data directly to the job instead of relying on datafeed
* adjusting API usage
* adding Todos and adjusting endpoint
* Adding types to reindexRequest
* removing unreliable "live" data test
* adding index refresh to test
* adding index refresh to test
* adding index refresh to yaml test
* fixing bad exists call
* removing todo
* Addressing remove comments
* Adjusting rest endpoint name
* making service have its own logger
* adjusting validity check for newindex names
* fixing typos
* fixing renaming
The unused state remover was never adjusted to account for jobs stored
in the config index. The result was that when triggered it removed
state for all jobs stored in the config index.
This commit fixes the issue.
Closes#37109
Changes the feature usage retrieval to use the job manager rather than
directly talking to the cluster state, because jobs can now be either in
cluster state or stored in an index
This is a follow-up of #36702 / #36698
This change cleans up a number of ugly BWC
workarounds in the ML code.
7.0 cannot run in a mixed version cluster with
versions prior to 6.7, so code that deals with
these old versions is no longer required.
Closes#29963
* [ML] Job and datafeed mappings with index template (#32719)
Index mappings for the configuration documents
* [ML] Job config document CRUD operations (#32738)
* [ML] Datafeed config CRUD operations (#32854)
* [ML] Change JobManager to work with Job config in index (#33064)
* [ML] Change Datafeed actions to read config from the config index (#33273)
* [ML] Allocate jobs based on JobParams rather than cluster state config (#33994)
* [ML] Return missing job error when .ml-config is does not exist (#34177)
* [ML] Close job in index (#34217)
* [ML] Adjust finalize job action to work with documents (#34226)
* [ML] Job in index: Datafeed node selector (#34218)
* [ML] Job in Index: Stop and preview datafeed (#34605)
* [ML] Delete job document (#34595)
* [ML] Convert job data remover to work with index configs (#34532)
* [ML] Job in index: Get datafeed and job stats from index (#34645)
* [ML] Job in Index: Convert get calendar events to index docs (#34710)
* [ML] Job in index: delete filter action (#34642)
This changes the delete filter action to search
for jobs using the filter to be deleted in the index
rather than the cluster state.
* [ML] Job in Index: Enable integ tests (#34851)
Enables the ml integration tests excluding the rolling upgrade tests and a lot of fixes to
make the tests pass again.
* [ML] Reimplement established model memory (#35500)
This is the 7.0 implementation of a master node service to
keep track of the native process memory requirement of each ML
job with an associated native process.
The new ML memory tracker service works when the whole cluster
is upgraded to at least version 6.6. For mixed version clusters
the old mechanism of established model memory stored on the job
in cluster state was used. This means that the old (and complex)
code to keep established model memory up to date on the job object
has been removed in 7.0.
Forward port of #35263
* [ML] Need to wait for shards to replicate in distributed test (#35541)
Because the cluster was expanded from 1 node to 3 indices would
initially start off with 0 replicas. If the original node was
killed before auto-expansion to 1 replica was complete then
the test would fail because the indices would be unavailable.
* [ML] DelayedDataCheckConfig index mappings (#35646)
* [ML] JIndex: Restore finalize job action (#35939)
* [ML] Replace Version.CURRENT in streaming functions (#36118)
* [ML] Use 'anomaly-detector' in job config doc name (#36254)
* [ML] Job In Index: Migrate config from the clusterstate (#35834)
Migrate ML configuration from clusterstate to index for closed jobs
only once all nodes are v6.6.0 or higher
* [ML] Check groups against job Ids on update (#36317)
* [ML] Adapt to periodic persistent task refresh (#36633)
* [ML] Adapt to periodic persistent task refresh
If https://github.com/elastic/elasticsearch/pull/36069/files is
merged then the approach for reallocating ML persistent tasks
after refreshing job memory requirements can be simplified.
This change begins the simplification process.
* Remove AwaitsFix and implement TODO
* [ML] Default search size for configs
* Fix TooManyJobsIT.testMultipleNodes
Two problems:
1. Stack overflow during async iteration when lots of
jobs on same machine
2. Not effectively setting search size in all cases
* Use execute() instead of submit() in MlMemoryTracker
We don't need a Future to wait for completion
* [ML][TEST] Fix NPE in JobManagerTests
* [ML] JIindex: Limit the size of bulk migrations (#36481)
* [ML] Prevent updates and upgrade tests (#36649)
* [FEATURE][ML] Add cluster setting that enables/disables config migration (#36700)
This commit adds a cluster settings called `xpack.ml.enable_config_migration`.
The setting is `true` by default. When set to `false`, no config migration will
be attempted and non-migrated resources (e.g. jobs, datafeeds) will be able
to be updated normally.
Relates #32905
* [ML] Snapshot ml configs before migrating (#36645)
* [FEATURE][ML] Split in batches and migrate all jobs and datafeeds (#36716)
Relates #32905
* SQL: Fix translation of LIKE/RLIKE keywords (#36672)
* SQL: Fix translation of LIKE/RLIKE keywords
Refactor Like/RLike functions to simplify internals and improve query
translation when chained or within a script context.
Fix#36039Fix#36584
* Fixing line length for EnvironmentTests and RecoveryTests (#36657)
Relates #34884
* Add back one line removed by mistake regarding java version check and
COMPAT jvm parameter existence
* Do not resolve addresses in remote connection info (#36671)
The remote connection info API leads to resolving addresses of seed
nodes when invoked. This is problematic because if a hostname fails to
resolve, we would not display any remote connection info. Yet, a
hostname not resolving can happen across remote clusters, especially in
the modern world of cloud services with dynamically chaning
IPs. Instead, the remote connection info API should be providing the
configured seed nodes. This commit changes the remote connection info to
display the configured seed nodes, avoiding a hostname resolution. Note
that care was taken to preserve backwards compatibility with previous
versions that expect the remote connection info to serialize a transport
address instead of a string representing the hostname.
* [Painless] Add boxed type to boxed type casts for method/return (#36571)
This adds implicit boxed type to boxed types casts for non-def types to create asymmetric casting relative to the def type when calling methods or returning values. This means that a user calling a method taking an Integer can call it with a Byte, Short, etc. legally which matches the way def works. This creates consistency in the casting model that did not previously exist.
* SNAPSHOTS: Adjust BwC Versions in Restore Logic (#36718)
* Re-enables bwc tests with adjusted version conditions now that #36397 enables concurrent snapshots in 6.6+
* ingest: fix on_failure with Drop processor (#36686)
This commit allows a document to be dropped when a Drop processor
is used in the on_failure fork of the processor chain.
Fixes#36151
* Initialize startup `CcrRepositories` (#36730)
Currently, the CcrRepositoryManger only listens for settings updates
and installs new repositories. It does not install the repositories that
are in the initial settings. This commit, modifies the manager to
install the initial repositories. Additionally, it modifies the ccr
integration test to configure the remote leader node at startup, instead
of using a settings update.
* [TEST] fix float comparison in RandomObjects#getExpectedParsedValue
This commit fixes a test bug introduced with #36597. This caused some
test failure as stored field values comparisons would not work when CBOR
xcontent type was used.
Closes#29080
* [Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)
This commit exposes lucene's LatLonShape field as the
default type in GeoShapeFieldMapper. To use the new
indexing approach, simply set "type" : "geo_shape" in
the mappings without setting any of the strategy, precision,
tree_levels, or distance_error_pct parameters. Note the
following when using the new indexing approach:
* geo_shape query does not support querying by
MULTIPOINT.
* LINESTRING and MULTILINESTRING queries do not
yet support WITHIN relation.
* CONTAINS relation is not yet supported.
The tree, precision, tree_levels, distance_error_pct,
and points_only parameters are deprecated.
* TESTS:Debug Log. IndexStatsIT#testFilterCacheStats
* ingest: support default pipelines + bulk upserts (#36618)
This commit adds support to enable bulk upserts to use an index's
default pipeline. Bulk upsert, doc_as_upsert, and script_as_upsert
are all supported.
However, bulk script_as_upsert has slightly surprising behavior since
the pipeline is executed _before_ the script is evaluated. This means
that the pipeline only has access the data found in the upsert field
of the script_as_upsert. The non-bulk script_as_upsert (existing behavior)
runs the pipeline _after_ the script is executed. This commit
does _not_ attempt to consolidate the bulk and non-bulk behavior for
script_as_upsert.
This commit also adds additional testing for the non-bulk behavior,
which remains unchanged with this commit.
fixes#36219
* Fix duplicate phrase in shrink/split error message (#36734)
This commit removes a duplicate "must be a" from the shrink/split error
messages.
* Deprecate types in get_source and exist_source (#36426)
This change adds a new untyped endpoint `{index}/_source/{id}` for both the
GET and the HEAD methods to get the source of a document or check for its
existance. It also adds deprecation warnings to RestGetSourceAction that emit
a warning when the old deprecated "type" parameter is still used. Also updating
documentation and tests where appropriate.
Relates to #35190
* Revert "[Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)"
This reverts commit 5bc7822562.
* Enhance Invalidate Token API (#35388)
This change:
- Adds functionality to invalidate all (refresh+access) tokens for all users of a realm
- Adds functionality to invalidate all (refresh+access)tokens for a user in all realms
- Adds functionality to invalidate all (refresh+access) tokens for a user in a specific realm
- Changes the response format for the invalidate token API to contain information about the
number of the invalidated tokens and possible errors that were encountered.
- Updates the API Documentation
After back-porting to 6.x, the `created` field will be removed from master as a field in the
response
Resolves: #35115
Relates: #34556
* Add raw sort values to SearchSortValues transport serialization (#36617)
In order for CCS alternate execution mode (see #32125) to be able to do the final reduction step on the CCS coordinating node, we need to serialize additional info in the transport layer as part of each `SearchHit`. Sort values are already present but they are formatted according to the provided `DocValueFormat` provided. The CCS node needs to be able to reconstruct the lucene `FieldDoc` to include in the `TopFieldDocs` and `CollapseTopFieldDocs` which will feed the `mergeTopDocs` method used to reduce multiple search responses (one per cluster) into one.
This commit adds such information to the `SearchSortValues` and exposes it through a new getter method added to `SearchHit` for retrieval. This info is only serialized at transport and never printed out at REST.
* Watcher: Ensure all internal search requests count hits (#36697)
In previous commits only the stored toXContent version of a search
request was using the old format. However an executed search request was
already disabling hit counts. In 7.0 hit counts will stay enabled by
default to allow for proper migration.
Closes#36177
* [TEST] Ensure shard follow tasks have really stopped.
Relates to #36696
* Ensure MapperService#getAllMetaFields elements order is deterministic (#36739)
MapperService#getAllMetaFields returns an array, which is created out of
an `ObjectHashSet`. Such set does not guarantee deterministic hash
ordering. The array returned by its toArray may be sorted differently
at each run. This caused some repeatability issues in our tests (see #29080)
as we pick random fields from the array of possible metadata fields,
but that won't be repeatable if the input array is sorted differently at
every run. Once setting the tests seed, hppc picks that up and the sorting is
deterministic, but failures don't repeat with the seed that gets printed out
originally (as a seed was not originally set).
See also https://issues.carrot2.org/projects/HPPC/issues/HPPC-173.
With this commit, we simply create a static sorted array that is used for
`getAllMetaFields`. The change is in production code but really affects
only testing as the only production usage of this method was to iterate
through all values when parsing fields in the high-level REST client code.
Anyways, this seems like a good change as returning an array would imply
that it's deterministically sorted.
* Expose Sequence Number based Optimistic Concurrency Control in the rest layer (#36721)
Relates #36148
Relates #10708
* [ML] Mute MlDistributedFailureIT
* Deprecate types in index API
- deprecate type-based constructors of IndexRequest
- update tests to use typeless IndexRequest constructors
- no yaml tests as they have been already added in #35790
Relates to #35190
Redeprecates the `/_xpack/rollup` endpoints in favor of `/_rollup`.
When we cleanup the rollup in a cluster containing 6.x nodes we need to
use `/_xpack/rollup` instead of `/_rollup` because the 6.x nodes don't
know about `/_rollup`. In those cases we must ignore the deprecation
warnings that the 7.0 node will return for the end point.
Closes#36044
* This commit is part of our plan to deprecate and ultimately remove the use of _xpack in the REST APIs.
- REST API docs
- HLRC docs and doc tests
- Handle REST actions with deprecation warnings
- Changed endpoints in rest-api-spec and relevant file names
This commit changes the format of the `hits.total` in the search response to be an object with
a `value` and a `relation`. The `value` indicates the number of hits that match the query and the
`relation` indicates whether the number is accurate (in which case the relation is equals to `eq`)
or a lower bound of the total (in which case it is equals to `gte`).
This change also adds a parameter called `rest_total_hits_as_int` that can be used in the
search APIs to opt out from this change (retrieve the total hits as a number in the rest response).
Note that currently all search responses are accurate (`track_total_hits: true`) or they don't contain
`hits.total` (`track_total_hits: true`). We'll add a way to get a lower bound of the total hits in a
follow up (to allow numbers to be passed to `track_total_hits`).
Relates #33028
* ML: Removing result_finalization_window && overlapping_buckets
* Reverting bad method deletions
* Setting to current before backport to try and get a green build
* fixing testBuildAutodetectCommand test
* disabling bwc tests for backport
* ML: Adding missing datacheck to datafeedjob
* Adding client side and docs
* Making adjustments to validations
* Making values default to on, having more sensible limits
* Intermittent commit, still need to figure out interval
* Adjusting delayed data check interval
* updating docs
* Making parameter Boolean, so it is nullable
* bumping bwc to 7 before backport
* changing to version current
* moving delayed data check config its own object
* Separation of duties for delayed data detection
* fixing checkstyles
* fixing checkstyles
* Adjusting default behavior so that null windows are allowed
* Mentioning the default value
* Fixing comments, syncing up validations
* Adding rollup support for datafeeds
* Fixing tests and adjusting formatting
* minor formatting chagne
* fixing some syntax and removing redundancies
* Refactoring and fixing failing test
* Refactoring, adding paranoid null check
* Moving rollup into the aggregation package
* making AggregationToJsonProcessor package private again
* Addressing test failure
* Fixing validations, chunking
* Addressing failing test
* rolling back RollupJobCaps changes
* Adding comment and cleaning up test
* Addressing review comments and test failures
* Moving builder logic into separate methods
* Addressing PR comments, adding test for rollup permissions
* Fixing test failure
* Adding rollup priv check on datafeed put
* Handling missing index when getting caps
* Fixing unused import
#33708 introduced a strict deprecation mode that makes a REST request
fail if there is a warning header in the response returned by
Elasticsearch (usually a deprecation message signaling that a feature
or a field has been deprecated).
This change adds the strict deprecation mode into the REST integration
tests, and makes the tests fail if a deprecated feature is used. Also
any test using a deprecated feature has been modified to pass the build.
The YAML integration tests already analyzed HTTP warnings so they do
not use this mode, keeping their "expected vs actual" behavior.
All of the tests in PainlessDomainSplitIT have an awaitsfix, which
causes the build to fail since no tests are run. This adds an empty
test to get the build going again.
Relates #34683
Relates #32966
In some of our X-Pack REST tests we have to wait for pending tasks to
complete. We are now needing this functionality in ESRestTestCase for
the docs tests where we run against X-Pack features. This commit moves
the helper method that we have in X-Pack to ESRestTestCase, and removes
duplicate logic from waiting for rollup tasks to complete.
The setting that reduces the disk space requirement
for the forecasting integration tests was accidentally
removed in #31757 when files were moved around. This
change simply adds back the setting that existed before
that.
This commit moves the definition of domainSplit into java and exposes it
as a painless whitelist extension. The method also no longer needs
params, and version which ignores params is added and deprecated.
This changes the delete job API by adding
the choice to delete a job asynchronously.
The commit adds a `wait_for_completion` parameter
to the delete job request. When set to `false`,
the action returns immediately and the response
contains the task id.
This also changes the handling of subsequent
delete requests for a job that is already being
deleted. It now uses the task framework to check
if the job is being deleted instead of the cluster
state. This is a beneficial for it is going to also
be working once the job configs are moved out of the
cluster state and into an index. Also, force delete
requests that are waiting for the job to be deleted
will not proceed with the deletion if the first task
fails. This will prevent overloading the cluster. Instead,
the failure is communicated better via notifications
so that the user may retry.
Finally, this makes the `deleting` property of the job
visible (also it was renamed from `deleted`). This allows
a client to render a deleting job differently.
Closes#32836
This endpoint accepts an arbitrary file in the request body and
attempts to determine the structure. If successful it also
proposes mappings that could be used when indexing the file's
contents, and calculates simple statistics for each of the fields
that are useful in the data preparation step prior to configuring
machine learning jobs.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/plugin/ml/qa/native-multi-node-tests`,
`x-pack/plugin/ml/qa/single-node-tests` projects to use the new
versions.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/qa/ml-basic-multi-node` project to use
the new versions.
This reworks how we configure the `shadow` plugin in the build. The major
change is that we no longer bundle dependencies in the `compile` configuration,
instead we bundle dependencies in the new `bundle` configuration. This feels
more right because it is a little more "opt in" rather than "opt out" and the
name of the `bundle` configuration is a little more obvious.
As an neat side effect of this, the `runtimeElements` configuration used when
one project depends on another now contains exactly the dependencies needed
to run the project so you no longer need to reference projects that use the
shadow plugin like this:
```
testCompile project(path: ':client:rest-high-level', configuration: 'shadow')
```
You can instead use the much more normal:
```
testCompile "org.elasticsearch.client:elasticsearch-rest-high-level-client:${version}"
```
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/qa/audit-tests`,
`x-pack/qa/ml-disabled`, and `x-pack/qa/multi-node` projects to use the
new versions.
This commit moves the ML QA tests to be a sub-project of ML. The purpose
of this refactoring is to enable ML developers to run
:x-pack:plugin:ml:check and run the vast majority of a ML tests with a
single command (this still does not contain the ML REST tests, nor the
upgrade tests). This simplifies local development for faster iteration.
Dimitris Athanasiou
Przemysław Witek
Benjamin Trent
David Roberts
Igor Motov
Rory Hunter
Yannick Welsch
Armin Braun
Mark Vieira
Przemyslaw Gomulka
Andrei Stefan
Alpar Torok
Lee Hinman
Ryan Ernst
Jason Tedor
David Turner
Ed Savage
Zachary Tong
Ed Savage
Tom Veasey
David Kyle
Mehran Koushkebaghi
Martijn Laarman
Christoph Büscher
Alexander Reelsen
Julie Tibshirani
markharwood
Hendrik Muhs
Mayya Sharipova
Nik Everett
Ioannis Kakavas
Jim Ferenczi
Tal Levy
Pratik Sanglikar
Lee Hinman
lipsill
Ryan Ernst
jaymode
Colin Goodheart-Smithe
Gordon Brown