This PR adds deprecation warnings when accessing System Indices via the REST layer. At this time, these warnings are only enabled for Snapshot builds by default, to allow projects external to Elasticsearch additional time to adjust their access patterns.
Deprecation warnings will be triggered by all REST requests which access registered System Indices, except for purpose-specific APIs which access System Indices as an implementation detail a few specific APIs which will continue to allow access to system indices by default:
- `GET _cluster/health`
- `GET {index}/_recovery`
- `GET _cluster/allocation/explain`
- `GET _cluster/state`
- `POST _cluster/reroute`
- `GET {index}/_stats`
- `GET {index}/_segments`
- `GET {index}/_shard_stores`
- `GET _cat/[indices,aliases,health,recovery,shards,segments]`
Deprecation warnings for accessing system indices take the form:
```
this request accesses system indices: [.some_system_index], but in a future major version, direct access to system indices will be prevented by default
```
Referencing a project instance during task execution is discouraged by
Gradle and should be avoided. E.g. It is incompatible with Gradles
incubating configuration cache. Instead there are services available to handle
archive and filesystem operations in task actions.
Brings us one step closer to #57918
This commit adds the `index.routing.allocation.prefer._tier` setting to the
`DataTierAllocationDecider`. This special-purpose allocation setting lets a user specify a
preference-based list of tiers for an index to be assigned to. For example, if the setting were set
to:
```
"index.routing.allocation.prefer._tier": "data_hot,data_warm,data_content"
```
If the cluster contains any nodes with the `data_hot` role, the decider will only allow them to be
allocated on the `data_hot` node(s). If there are no `data_hot` nodes, but there are `data_warm` and
`data_content` nodes, then the index will be allowed to be allocated on `data_warm` nodes.
This allows us to specify an index's preference for tier(s) without causing the index to be
unassigned if no nodes of a preferred tier are available.
Subsequent work will change the ILM migration to make additional use of this setting.
Relates to #60848
This commit adds the functionality to allocate newly created indices on nodes in the "hot" tier by
default when they are created.
This does not break existing behavior, as nodes with the `data` role are considered to be part of
the hot tier. Users that separate their deployments by using the `data_hot` (and `data_warm`,
`data_cold`, `data_frozen`) roles will have their data allocated on the hot tier nodes now by
default.
This change is a little more complicated than changing the default value for
`index.routing.allocation.include._tier` from null to "data_hot". Instead, this adds the ability to
have a plugin inject a setting into the builder for a newly created index. This has the benefit of
allowing this setting to be visible as part of the settings when retrieving the index, for example:
```
// Create an index
PUT /eggplant
// Get an index
GET /eggplant?flat_settings
```
Returns the default settings now of:
```json
{
"eggplant" : {
"aliases" : { },
"mappings" : { },
"settings" : {
"index.creation_date" : "1597855465598",
"index.number_of_replicas" : "1",
"index.number_of_shards" : "1",
"index.provided_name" : "eggplant",
"index.routing.allocation.include._tier" : "data_hot",
"index.uuid" : "6ySG78s9RWGystRipoBFCA",
"index.version.created" : "8000099"
}
}
}
```
After the initial setting of this setting, it can be treated like any other index level setting.
This new setting is *not* set on a new index if any of the following is true:
- The index is created with an `index.routing.allocation.include.<anything>` setting
- The index is created with an `index.routing.allocation.exclude.<anything>` setting
- The index is created with an `index.routing.allocation.require.<anything>` setting
- The index is created with a null `index.routing.allocation.include._tier` value
- The index was created from an existing source metadata (shrink, clone, split, etc)
Relates to #60848
Converting AllFieldMapper to parametrized form ended up not being run through BWC
testing, resulting in an incorrect implementation being committed. This commit fixes
the serialization, and adds unit tests as well as unmuting the BWC test that uncovered
the bug.
Fixes#60986
This commit introduces a new thread pool, `system_read`, which is
intended for use by system indices for all read operations (get and
search). The `system_read` pool is a fixed thread pool with a maximum
number of threads equal to lesser of half of the available processors
or 5. Given the combination of both get and read operations in this
thread pool, the queue size has been set to 2000. The motivation for
this change is to allow system read operations to be serviced in spite
of the number of user searches.
In order to avoid a significant performance hit due to pattern matching
on all search requests, a new metadata flag is added to mark indices
as system or non-system. Previously created system indices will have
flag added to their metadata upon upgrade to a version with this
capability.
Additionally, this change also introduces a new class, `SystemIndices`,
which encapsulates logic around system indices. Currently, the class
provides a method to check if an index is a system index and a method
to find a matching index descriptor given the name of an index.
Relates #50251
Relates #37867
Backport of #57936
* Merge test runner task into RestIntegTest (#60261)
* Merge test runner task into RestIntegTest
* Reorganizing Standalone runner and RestIntegTest task
* Rework general test task configuration and extension
* Fix merge issues
* use former 7.x common test configuration
These tests sometimes install a template so they can be compatible with older versions, but they run
amok of the occasionally installed "global" template which changes the default number of shards.
This commit adds `allowedWarnings` and allows these warnings to be present, but doesn't fail if they
are not (since the global template is only randomly installed).
Resolves#58807Resolves#58258
If the recovery source is on an old node (before 7.2), then the recovery
target won't have the safe commit after phase1 because the recovery
source does not send the global checkpoint in the clean_files step. And
if the recovery fails and retries, then the recovery stage won't
transition properly. If a sync_id is used in peer recovery, then the
clean_files step won't be executed to move the stage to TRANSLOG.
Relates ##7187
Closes#57708
This commit creates a new Gradle plugin to provide a separate task name
and source set for running YAML based REST tests. The only project
converted to use the new plugin in this PR is distribution/archives/integ-test-zip.
For which the testing has been moved to :rest-api-spec since it makes the most
sense and it avoids a small but awkward change to the distribution plugin.
The remaining cases in modules, plugins, and x-pack will be handled in followups.
This plugin is distinctly different from the plugin introduced in #55896 since
the YAML REST tests are intended to be black box tests over HTTP. As such they
should not (by default) have access to the classpath for that which they are testing.
The YAML based REST tests will be moved to separate source sets (yamlRestTest).
The which source is the target for the test resources is dependent on if this
new plugin is applied. If it is not applied, it will default to the test source
set.
Further, this introduces a breaking change for plugin developers that
use the YAML testing framework. They will now need to either use the new source set
and matching task, or configure the rest resources to use the old "test" source set that
matches the old integTest task. (The former should be preferred).
As part of this change (which is also breaking for plugin developers) the
rest resources plugin has been removed from the build plugin and now requires
either explicit application or application via the new YAML REST test plugin.
Plugin developers should be able to fix the breaking changes to the YAML tests
by adding apply plugin: 'elasticsearch.yaml-rest-test' and moving the YAML tests
under a yamlRestTest folder (instead of test)
This template was added for 7.0 for what I am guessing is a BWC issue related to deprecation
warnings. It unfortunately seems to cause failures because templates for these tests are not cleared
after the test (because these are upgrade tests).
Resolves#56363
As the datastream information is stored in the `ClusterState.Metadata` we exposed
the `Metadata` to the `AsyncWaitStep#evaluateCondition` method in order for
the steps to be able to identify when a managed index is part of a DataStream.
If a managed index is part of a DataStream the rollover target is the DataStream
name and the highest generation index is the write index (ie. the rolled index).
(cherry picked from commit 6b410dfb78f3676fce1b7401f1628c1ca6fbd45a)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
I've noticed that a lot of our tests are using deprecated static methods
from the Hamcrest matchers. While this is not a big deal in any
objective sense, it seems like a small good thing to reduce compilation
warnings and be ready for a new release of the matcher library if we
need to upgrade. I've also switched a few other methods in tests that
have drop-in replacements.
This is a simple naming change PR, to fix the fact that "metadata" is a
single English word, and for too long we have not followed general
naming conventions for it. We are also not consistent about it, for
example, METADATA instead of META_DATA if we were trying to be
consistent with MetaData (although METADATA is correct when considered
in the context of "metadata"). This was a simple find and replace across
the code base, only taking a few minutes to fix this naming issue
forever.
If an index was created in version 6 and contain a date field with a joda-style pattern it should still be allowed to search and insert document into it.
Those created in 6 but date pattern starts with 8, should be considered as java style.
* Smarter copying of the rest specs and tests (#52114)
This PR addresses the unnecessary copying of the rest specs and allows
for better semantics for which specs and tests are copied. By default
the rest specs will get copied if the project applies
`elasticsearch.standalone-rest-test` or `esplugin` and the project
has rest tests or you configure the custom extension `restResources`.
This PR also removes the need for dozens of places where the x-pack
specs were copied by supporting copying of the x-pack rest specs too.
The plugin/task introduced here can also copy the rest tests to the
local project through a similar configuration.
The new plugin/task allows a user to minimize the surface area of
which rest specs are copied. Per project can be configured to include
only a subset of the specs (or tests). Configuring a project to only
copy the specs when actually needed should help with build cache hit
rates since we can better define what is actually in use.
However, project level optimizations for build cache hit rates are
not included with this PR.
Also, with this PR you can no longer use the includePackaged flag on
integTest task.
The following items are included in this PR:
* new plugin: `elasticsearch.rest-resources`
* new tasks: CopyRestApiTask and CopyRestTestsTask - performs the copy
* new extension 'restResources'
```
restResources {
restApi {
includeCore 'foo' , 'bar' //will include the core specs that start with foo and bar
includeXpack 'baz' //will include x-pack specs that start with baz
}
restTests {
includeCore 'foo', 'bar' //will include the core tests that start with foo and bar
includeXpack 'baz' //will include the x-pack tests that start with baz
}
}
```
Today, the replica allocator uses peer recovery retention leases to
select the best-matched copies when allocating replicas of indices with
soft-deletes. We can employ this mechanism for indices without
soft-deletes because the retaining sequence number of a PRRL is the
persisted global checkpoint (plus one) of that copy. If the primary and
replica have the same retaining sequence number, then we should be able
to perform a noop recovery. The reason is that we must be retaining
translog up to the local checkpoint of the safe commit, which is at most
the global checkpoint of either copy). The only limitation is that we
might not cancel ongoing file-based recoveries with PRRLs for noop
recoveries. We can't make the translog retention policy comply with
PRRLs. We also have this problem with soft-deletes if a PRRL is about to
expire.
Relates #45136
Relates #46959
We need to make sure that the global checkpoints and peer recovery
retention leases were advanced to the max_seq_no and synced; otherwise,
we can risk expiring some peer recovery retention leases because of the
file-based recovery threshold.
Relates #49448
Fixes the muted test "testAutoExpandIndicesDuringRollingUpgrade". We can't wait in the test for
the index to be green, as we have put a filter exclusion into place that prevents all shards from
being allocated after a node rejoins. Instead we check whether the correct auto-expansion has
taken place.
Closes#50426
Follow-up to #48974 that ensures that replicas are only auto-expanded according to allocation
filtering rules once all nodes are upgraded to a version that supports this. Helps with
orchestrating cluster upgrades.
Follow-up to #48974 that ensures that replicas are only auto-expanded according to allocation
filtering rules once all nodes are upgraded to a version that supports this. Helps with
orchestrating cluster upgrades.
Since 7.4, we switch from translog to Lucene as the source of history
for peer recoveries. However, we reduce the likelihood of
operation-based recoveries when performing a full cluster restart from
pre-7.4 because existing copies do not have PPRL.
To remedy this issue, we fallback using translog in peer recoveries if
the recovering replica does not have a peer recovery retention lease,
and the replication group hasn't fully migrated to PRRL.
Relates #45136
This change adds a dynamic cluster setting named `indices.id_field_data.enabled`.
When set to `false` any attempt to load the fielddata for the `_id` field will fail
with an exception. The default value in this change is set to `false` in order to prevent
fielddata usage on this field for future versions but it will be set to `true` when backporting
to 7x. When the setting is set to true (manually or by default in 7x) the loading will also issue
a deprecation warning since we want to disallow fielddata entirely when https://github.com/elastic/elasticsearch/issues/26472
is implemented.
Closes#43599
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
This commit introduces a consistent, and type-safe manner for handling
global build parameters through out our build logic. Primarily this
replaces the existing usages of extra properties with static accessors.
It also introduces and explicit API for initialization and mutation of
any such parameters, as well as better error handling for uninitialized
or eager access of parameter values.
Closes#42042
* Bwc testclusters all (#46265)
Convert all bwc projects to testclusters
* Fix bwc versions config
* WIP fix rolling upgrade
* Fix bwc tests on old versions
* Fix rolling upgrade
Changes auto-id index requests to use optype CREATE, making it compliant with our docs.
This will also make these auto-id index requests compatible with the new "create-doc" index
privilege (which is based on the optype), the default optype is changed to create, just as it is
already documented.
Nhat Nguyen
Gordon Brown
Rene Groeschke
Lee Hinman
Alan Woodward
Jay Modi
Dan Hermann
Martijn van Groningen
Jake Landis
Andrei Dan
Rene Groeschke
Hendrik Muhs
Igor Motov
William Brafford
Jason Tedor
Przemyslaw Gomulka
Mark Vieira
Yannick Welsch
Jim Ferenczi
Dimitris Athanasiou
Rory Hunter
Alpar Torok