Previously when a numeric literal was enclosed in parentheses and then
negated, the negation was lost and the number was considered positive, e.g.:
`-(5)` was considered as `5` instead of `-5`
`- ( (1.28) )` was considered as `1.28` instead of `-1.28`
Fixes: #48009
(cherry picked from commit 4dee4bf3b34081062ba2e28ab8524a066812a180)
Audit messages are stored with millisecond timestamps. If two
messages have the same millisecond timestamp then asserting on
their order is impossible given the information available.
This PR changes the assertion on audit messages in the native
data frame analytics tests to assert that the expected audit
messages exist in any order.
Fixes#48035
which is backport merge and adds a new ingest processor, named enrich processor,
that allows document being ingested to be enriched with data from other indices.
Besides a new enrich processor, this PR adds several APIs to manage an enrich policy.
An enrich policy is in charge of making the data from other indices available to the enrich processor in an efficient manner.
Related to #32789
max_empty_searches = -1 in a datafeed update implies
max_empty_searches will be unset on the datafeed when
the update is applied. The isNoop() method needs to
take this -1 to null equivalence into account.
Previously, the safety check for the 2nd argument of the DateAddProcessor was
restricting it to Integer which was wrong since we allow all non-rational
numbers, so it's changed to a Number check as it's done in other cases.
Enhanced some tests regarding the check for an integer (non-rational
argument).
(cherry picked from commit 0516b6eaf5eb98fa5bd087c3fece80139a6b118e)
This change adds:
- A new option, allow_lazy_open, to anomaly detection jobs
- A new option, allow_lazy_start, to data frame analytics jobs
Both work in the same way: they allow a job to be
opened/started even if no ML node exists that can
accommodate the job immediately. In this situation
the job waits in the opening/starting state until ML
node capacity is available. (The starting state for data
frame analytics jobs is new in this change.)
Additionally, the ML nightly maintenance tasks now
creates audit warnings for ML jobs that are unassigned.
This means that jobs that cannot be assigned to an ML
node for a very long time will show a yellow warning
triangle in the UI.
A final change is that it is now possible to close a job
that is not assigned to a node without using force.
This is because previously jobs that were open but
not assigned to a node were an aberration, whereas
after this change they'll be relatively common.
This PR adds the ability to run the enrich policy execution task in the background,
returning a task id instead of waiting for the completed operation.
Prior to this change the `target_field` would always be a json array
field in the document being ingested. This to take into account that
multiple enrich documents could be inserted into the `target_field`.
However the default `max_matches` is `1`. Meaning that by default
only a single enrich document would be added to `target_field` json
array field.
This commit changes this; if `max_matches` is set to `1` then the single
document would be added as a json object to the `target_field` and
if it is configured to a higher value then the enrich documents will be
added as a json array (even if a single enrich document happens to be
enriched).
Currently, partial snapshots will eventually build up unless they are
manually deleted. Partial snapshots may be useful if there is not a more
recent successful snapshot, but should eventually be deleted if they are
no longer useful.
With this change, partial snapshots are deleted using the following
strategy: PARTIAL snapshots will be kept until the configured
expire_after period has passed, if present, and then be deleted. If
there is no configured expire_after in the retention policy, then they
will be deleted if there is at least one more recent successful snapshot
from this policy (as they may otherwise be useful for troubleshooting
purposes). Partial snapshots are not counted towards either min_count or
max_count.
Adds a new datafeed config option, max_empty_searches,
that tells a datafeed that has never found any data to stop
itself and close its associated job after a certain number
of real-time searches have returned no data.
Backport of #47922
Make clear in the docs that the role mapping APIs is the preferred
way to manage role mappings and that the role mappings that are
defined in files cannot be viewed or managed with the APIs
Usually syslog timestamps have two spaces before a single
digit day-of-month. However, in some non-syslog cases
where syslog-like timestamps are used there is only one
space. The grok pattern supports this, so the timestamp
parser should too. This change makes the
find_file_structure endpoint do this.
Also fixes another problem that the same test case
exposed in the find_file_structure endpoint, which was
that the exclude_lines_pattern for delimited files was
always created on the assumption the delimiter was a
comma. Now it is based on the actual delimiter.
This commit adds two APIs that allow to pause and resume
CCR auto-follower patterns:
// pause auto-follower
POST /_ccr/auto_follow/my_pattern/pause
// resume auto-follower
POST /_ccr/auto_follow/my_pattern/resume
The ability to pause and resume auto-follow patterns can be
useful in some situations, including the rolling upgrades of
cluster using a bi-directional cross-cluster replication scheme
(see #46665).
This commit adds a new active flag to the AutoFollowPattern
and adapts the AutoCoordinator and AutoFollower classes so
that it stops to fetch remote's cluster state when all auto-follow
patterns associate to the remote cluster are paused.
When an auto-follower is paused, remote indices that match the
pattern are just ignored: they are not added to the pattern's
followed indices uids list that is maintained in the local cluster
state. This way, when the auto-follow pattern is resumed the
indices created in the remote cluster in the meantime will be
picked up again and added as new following indices. Indices
created and then deleted in the remote cluster will be ignored
as they won't be seen at all by the auto-follower pattern at
resume time.
Backport of #47510 for 7.x
Previously, Nullability was set to UNKNOWN instead of TRUE which
resulted on QueryFolder not correctly folding to NULL if any of the args
was null.
Remove the overriding nullable() also for DatePart/DateTrunc to allow
delegation the parent class.
(cherry picked from commit 05a7108e133b5ae7bec2257db5ae2d30ad926ee2)
Joda was using ResolverStyle.STRICT when parsing. This means that date will be validated to be a correct year, year-of-month, day-of-month
However, we also want to make it works with Year-Of-Era as Joda used to, hence custom temporalquery.localdate in DateFormatters.from
Within DateFormatters we use the correct uuuu year instead of yyyy year of era
worth noting: if yyyy(without an era) is used in code, the parsing result will be a TemporalAccessor which will fail to be converted into LocalDate. We mostly use DateFormatters.from so this takes care of this. If possible the uuuu format should be used.
* [ML][Analytics] fix bug where regression deleted early does not delete state (#47885)
* [ML][Analytics] fix bug where regression deleted early does not delete state
* Fixing ml with security test failure
* fixing for older java
Changes the execution logic to create a new task using the execute request,
and attaches the new task to the policy runner to be updated. Also, a new
response is now returned from the execute api, which contains either the task
id of the execution, or the completed status of the run. The fields are mutually
exclusive to make it easier to discern what type of response it is.
This change adds documentation for the SAML APIs in Elasticsearch
and adds simple instructions on how these APIs can be used to
authenticate a user with SAML by a custom web application other
than Kibana.
Resolves: #40352
rename internal indexes of transform plugin
- rename audit index and create an alias for accessing it, BWC: add an alias for old indexes to
keep them working, kibana UI will switch to use the read alias
- rename config index and provide BWC to read from old and new ones
Batch transforms automatically stop after all data has processed, therefore tests can not reliable test the state. This change rewrites tests to remove the unreliable tests or use continuous transforms instead as they do not auto-stop.
fixes#47441
One of the tests in this suit stops a master node,
plus we're doing other node starts in this suit.
=> the internal test cluster should be TEST and not `SUITE`
scoped to avoid random failures like the one in #47834Closes#47834
Michael Basnight
Marios Trivyzas
Przemysław Witek
Alex Pang
David Roberts
Martijn van Groningen
Hendrik Muhs
Benjamin Trent
James Baiera
Jake Landis
Gordon Brown
Ioannis Kakavas
Tanguy Leroux
Yogesh Gaikwad
Przemyslaw Gomulka
Nick Knize
Chris Roberson
Alexander Reelsen
Armin Braun
Igor Motov