The Windows service will use a private temporary directory under the
user that is performing the installation. In cases when the service will
run as a different user, operators need a method to set this temporary
directory elsewhere. We have such a mechanism, so this commit merely
adds a note to the documentation on how to utilize it.
Relates #28712
* Only bind loopback addresses when binding to local
Today when binding to local (the default) we bind to any address that is
a loopback address, or any address on an interface that declares itself
as a loopback interface. Yet, not all addresses on loopback interfaces
are loopback addresses. This arises on macOS where there is a link-local
address assigned to the loopback interface (fe80::1%lo0) and in Docker
services where virtual IPs of the service are assigned to the loopback
interface (docker/libnetwork#1877). These situations cause problems:
- because we do not handle the scope ID of a link-local address, we end
up bound to an address for which publishing of that address does not
allow that address to be reached (since we drop the scope)
- the virtual IPs in the Docker situation are not loopback addresses,
they are not link-local addresses, so we end up bound to interfaces
that cause the bootstrap checks to be enforced even though the
instance is only bound to local
We address this by only binding to actual loopback addresses, and skip
binding to any address on a loopback interface that is not a loopback
address. This lets us simplify some code where in the bootstrap checks
we were skipping link-local addresses, and in writing the ports file
where we had to skip link-local addresses because again the formatting
of them does not allow them to be connected to by another node (to be
clear, they could be connected to via the scope-qualified address, but
that information is not written out).
Relates #28029
This commit reorganizes some of the content in the configuring
Elasticsearch section of the docs. The changes are:
- move JVM options out of system configuration into configuring
Elasticsearch
- move JVM options to its own page of the docs
- move configuring the heap to important Elasticsearch settings
- move configuring the heap to its own page of the docs
- move all important settings to individual pages in the docs
- remove bootstrap.memory_lock from important settings, this is covered
in the swap section of system configuration
Relates #27755
JDK 9 has removed JVM options that were valid in JDK 8 (e.g., GC logging
flags) and replaced them with new flags that are not available in JDK
8. This means that a single JVM options file can no longer apply to JDK
8 and JDK 9, complicating development, complicating our packaging story,
and complicating operations. This commit extends the JVM options syntax
to specify the range of versions the option applies to. If the running
JVM matches the range of versions, the flag will be used to start the
JVM otherwise the flag will be ignored.
We implement this parser in Java for simplicity, and with this we start
our first step towards a Java launcher.
Relates #27675
For too long we have been groping around in the dark when faced with GC
issues because we rarely have GC logs at our disposal. This commit
enables GC logging by default out of the box.
Relates #27610
When these docs were moved they should have been moved to the system
configuration docs. This commit does that, and also fixes a missing
heading that broke the docs build.
Previously the bootstrap check for max number of threads was increased
from 2048 to 4096 yet the docs were never adjusted for this change. This
commit addresses this so the docs are in-line with the limit enforced in
the bootstrap check.
Relates #27511
Running with the all permission java.security.AllPermission granted is
equivalent to disabling the security manager. This commit adds a
bootstrap check that forbids running with this permission granted.
Relates #27548
This commit removes the ability to use ${prompt.secret} and
${prompt.text} as valid config settings. Secure settings has obsoleted
the need for this, and it cleans up some of the code in Bootstrap.
* Update Docker docs for 6.0.0-rc2
* Update the docs to match the new Docker "image flavours" of "basic",
"platinum", and "oss".
* Clarifications for Openshift and bind-mounts
* Bump docker-compose 2.x format to 2.2
* Combine Docker Toolbox instructions for setting vm.max_map_count for
both macOS + Windows
* devicemapper is not the default storage driver any more on RHEL
The JVM defaults to dumping the heap to the working directory of
Elasticsearch. For the RPM and Debian packages, this location is
/usr/share/elasticsearch. This directory is not writable by the
elasticsearch user, so by default heap dumps in this situation are
lost. This commit modifies the packaging for the RPM and Debian packages
to set the heap dump path to /var/lib/elasticsearch as the default
location for dumping the heap. This location is writable by the
elasticsearch user by default. We add documentation of this important
setting if /var/lib/elasticsearch is not suitable for receiving heap
dumps.
Relates #26755
Removing several occurrences of this typo in the docs and javadocs, seems to be
a common mistake. Corrections turn up once in a while in PRs, better to correct
some of this in one sweep.
The definition of development vs. production mode has evolved slightly
over time (with the introduction of single-node) discovery. This commit
clarifies the documentation to better account for this adjustment.
Relates #26460
587409e893 introduced a bug where an example of the format of a request which contained placeholder values was attempted to be tested. This change adds `NOTCONSOLE` to that snippet as the immediately following snippet tests a concrete example.
220212dd69 introduced a bug because the test substitution was looking for `otherhost` where the snippet contained `oldhost`. This change fixes the substitution
The environment variable CONF_DIR was previously inconsistently used in
our packaging to customize the location of Elasticsearch configuration
files. The importance of this environment variable has increased
starting in 6.0.0 as it's now used consistently to ensure Elasticsearch
and all secondary scripts (e.g., elasticsearch-keystore) all use the
same configuration. The name CONF_DIR is there for legacy reasons yet
it's too generic. This commit renames CONF_DIR to ES_PATH_CONF.
Relates #26197
This commit updates the docs for the config files to explain the new
mechanism for customizing the configuration directory via the
environment variable CONF_DIR.
Relates #25990
On non-Windows platforms, we ignore the environment variable
JAVA_TOOL_OPTIONS (this is an environment variable that the JVM respects
by default for picking up extra JVM options). The primary reason that we
ignore this because of the Jayatana agent on Ubuntu; a secondary reason
is that it produces an annoying "Picked up JAVA_TOOL_OPTIONS: ..."
output message. When the elasticsearch-env batch script was introduced
for Windows, ignoring this environment variable was deliberately not
carried over as the primary reason does not apply on Windows. However,
after additional thinking, it seems that we should simply be consistent
to the extent possible here (and also avoid that annoying "Picked up
JAVA_TOOL_OPTIONS: ..." on Windows too). This commit causes the Windows
version of elasticsearch-env to also ignore JAVA_TOOL_OPTIONS.
Relates #25968
This commit adds a bootstrap check for the maximum file size, and
ensures the limit is set correctly when Elasticsearch is installed as a
service on systemd-based systems.
Relates #25974
This commit adds the min wire/index compat versions to the main action
output. Not only will this make the compatility expected more
transparent, but it also allows to test which version others think the
compat versions are, similar to how we test the lucene version.
When a node tries to join a cluster, it goes through a validation step to make sure the node is compatible with the cluster. Currently we validation that the node can read the cluster state and that it is compatible with the indexes of the cluster. This PR adds validation that the joining node's version is compatible with the versions of existing nodes. Concretely we check that:
1) The node's min compatible version is higher or equal to any node in the cluster (this prevents a too-new node from joining)
2) The node's version is higher or equal to the min compat version of all cluster nodes (this prevents a too old join where, for example, the master is on 5.6, there's another 6.0 node in the cluster and a 5.4 node tries to join).
3) The node's major version is at least as higher as the lowest node in the cluster. This is important as we use the minimum version in the cluster to stop executing bwc code for operations that require multiple nodes. If the nodes are already operating in "new cluster mode", we should prevent nodes from the previous major to join (even if they are wire level compatible). This does mean that if you have a very unlucky partition during the upgrade which partitions all old nodes which are also a minority / data nodes only, the may not be able to re-join the cluster. We feel this edge case risk is well worth the simplification it brings to BWC layers only going one way. This restriction only holds if the cluster state has been recovered (i.e., the cluster has properly formed).
Also, the node join validation can now selectively fail specific nodes (previously the entire batch was failed). This is an important preparation for a follow up PR where we plan to have a rejected joining node die with dignity.
When a node tries to join a cluster, it goes through a validation step to make sure the node is compatible with the cluster. Currently we validation that the node can read the cluster state and that it is compatible with the indexes of the cluster. This PR adds validation that the joining node's version is compatible with the versions of existing nodes. Concretely we check that:
1) The node's min compatible version is higher or equal to any node in the cluster (this prevents a too-new node from joining)
2) The node's version is higher or equal to the min compat version of all cluster nodes (this prevents a too old join where, for example, the master is on 5.6, there's another 6.0 node in the cluster and a 5.4 node tries to join).
3) The node's major version is at least as higher as the lowest node in the cluster. This is important as we use the minimum version in the cluster to stop executing bwc code for operations that require multiple nodes. If the nodes are already operating in "new cluster mode", we should prevent nodes from the previous major to join (even if they are wire level compatible). This does mean that if you have a very unlucky partition during the upgrade which partitions all old nodes which are also a minority / data nodes only, the may not be able to re-join the cluster. We feel this edge case risk is well worth the simplification it brings to BWC layers only going one way.
Also, the node join validation can now selectively fail specific nodes (previously the entire batch was failed). This is an important preparation for a follow up PR where we plan to have a rejected joining node die with dignity.
This commit changes the default heap size to 1 GB. Experimenting with
elasticsearch is often done on laptops, and 1 GB is much friendlier to
laptop memory. It does put more pressure on the gc, but the tradeoff is
a smaller default footprint. Users running in production can (and
should) adjust the heap size as necessary for their usecase.
Jason Tedor
Ryan Ernst
Andrew Banchich
sandstrom
debadair
Denis Gladkikh
Philipp Krenn
Christoph Büscher
Kanako Nakai
Michael Basnight
Russ Cam
lcawley
Toby McLaughlin
Nicolas Sierra
Steve Kotsopoulos
Amine Daï
Dimitrios Liappis
Christoph Büscher
Colin Goodheart-Smithe
michaelbaamonde
Adrien Grand
propulkit
Clinton Gormley
Boaz Leskes