We look for the remote by scanning the output of "git remote -v" but we
were not actually looking at the output since standard output was not
redirected anywhere. This commit fixes this issue.
Relates #27308
Only tests should use the single argument Environment constructor. To
enforce this the single arg Environment constructor has been replaced with
a test framework factory method.
Production code (beyond initial Bootstrap) should always use the same
Environment object that Node.getEnvironment() returns. This Environment
is also available via dependency injection.
This commit adjusts the format of the SHA-512 checksum files supported
by the plugin installer. In particular, we now require that the SHA-512
format be a single-line file containing the checksum followed by two
spaces followed by the filename. We continue to support the legacy
format for SHA-1.
Relates #27093
This commit fixes an issue with the handling of paths containing
parentheses on Windows. When such a path is used as a component of
Elasticsearch home, then a later echo statement that is guarded by an if
will fail because the parentheses in the path will be confused with the
parentheses defining the if block. This commit fixes the issue by
protecting this echo statement by wrapping the possibly offending path
in quotes.
Relates #26916
* Removes minimum master nodes default number
At the moment the elasticsearch.yml contains the minimum master node setting commented out but with a value of 3. This has lead to users uncommenting the value and assuming it is a good default without reading that they need to change it to a quorum of master eligible nodes causing split brain in their cluster and defeating the point of the setting.
The default of 3 is not even a good default for our recommended setup of 3 dedicated master eligible nodes.
This changes the value o fthe commented out setting to something that will not produce valid config and should highlight that the value needs to be changed so users no longer uncomment the line without considering what the correct value for their setup should be.
* Addresses review comment
The JVM defaults to dumping the heap to the working directory of
Elasticsearch. For the RPM and Debian packages, this location is
/usr/share/elasticsearch. This directory is not writable by the
elasticsearch user, so by default heap dumps in this situation are
lost. This commit modifies the packaging for the RPM and Debian packages
to set the heap dump path to /var/lib/elasticsearch as the default
location for dumping the heap. This location is writable by the
elasticsearch user by default. We add documentation of this important
setting if /var/lib/elasticsearch is not suitable for receiving heap
dumps.
Relates #26755
With 6.0 rc1 we now publish sha512 checksums for official plugins.
However, in order to ease the pain for plugin authors, this commit adds
backcompat to still allow sha1 checksums. Also added tests for
checksums.
Closes#26746
The output when building bwc versions is currently verbose, with git
warnings from doing git checkout of a hash. This commit changes this to
print the useful info before and after checking out. Note that due to
using LoggedExec, if the git task exits non-zero, the entire output will
still be dumped.
When creating the keystore explicitly (from executing
elasticsearch-keystore create) or implicitly (for plugins that require
the keystore to be created on install) on an Elasticsearch package
installation, we are running as the root user. This leaves
/etc/elasticsearch/elasticsearch.keystore having the wrong ownership
(root:root) so that the elasticsearch user can not read the keystore on
startup. This commit adds setgid to /etc/elasticsearch on package
installation so that when executing this directory (as we would when
creating the keystore), we will end up with the correct ownership
(root:elasticsearch). Additionally, we set the permissions on the
keystore to be 660 so that the elasticsearch user via its group can read
this file on startup.
Relates #26412
This commit adds files to the build output called build_metadata which
contain key/value pairs of metadata associated with the build. The first
use of this metadata are the git hashes associated with bwc checkouts.
These metadata files will be picked up by CI intake jobs and stored
along with last-good-commit, and then passed back in throug the
BUILD_METADATA env var on periodic jobs.
At current, we do not feel there is enough of a reason to shade the low
level rest client. It caused problems with commons logging and IDE's
during the brief time it was used. We did not know exactly how many
users will need this, and decided that leaving shading out until we
gather more information is best. Users can still shade the jar
themselves. For information and feeback, see issue #26366.
Closes#26328
This reverts commit 3a20922046.
This reverts commit 2c271f0f22.
This reverts commit 9d10dbea39.
This reverts commit e816ef89a2.
This commit removes the keystore creation on elasticsearch startup, and
instead adds a plugin property which indicates the plugin needs the
keystore to exist. It does still make sure the keystore.seed exists on
ES startup, but through an "upgrade" method that loading the keystore in
Bootstrap calls.
closes#26309
This commit makes the security code aware of the Java 9 FilePermission changes (see #21534) and allows us to remove the `jdk.io.permissionsUseCanonicalPath` system property.
When Elasticsearch starts up, it tries to create a keystore if one does
not exist; this is so the keystore can be seeded. With the RPM and
Debian packages, the keystore would be located in
/etc/elasticsearch. This configuration directory is typically not
writable by the elasticsearch user so the Elasticsearch process will not
have permission to create the keystore. Instead, the RPM and Debian
packages should create the keystore (if it does not exist) on package
installation. This commit enables these packages to do that in the
post-install routines.
Relates #26282
We need to check if JAVA_TOOL_OPTIONS, and JAVA_OPTS are set, and if
ES_PATH_CONF is not set. However, if these variables are defined and
contain quotes, the current mechanism busts on them. Instead, we should
use safer mechanism for checking if these variable are defined or
not. This commit does that.
Relates #26268
We previously explicitly set the HOSTNAME environment variable so that
${HOSTNAME} could be used a placeholder for defining the node.name in
elasticsearch.yml. We removed explicitly setting this because bash
defines HOSTNAME. The problem is that bash defines HOSTNAME as a bash
variable, not as an environment variable. Therefore, to restore the
previous behavior, we export the bash value for HOSTNAME as an
environment variable named HOSTNAME. For consistency between Windows and
the Unix-like systems, we also define HOSTNAME with a value equal to the
environment variable COMPUTERNAME on Windows.
Relates #26262
We quoted some strings in the Windows elasticsearch-env script but echo
on Windows includes these quotes in the output. This commit removes
these quotes, they do not need to be output and are noise. Note that one
of the commands is wrapped in parentheses, this is to make obvious that
the space at the end of the corresponding line is intentionally there.
The error message for warning about the use of JAVA_TOOL_OPTIONS on
Windows incorrectly uses $JAVA_TOOL_OPTIONS to dereference the
environment variable JAVA_TOOL_OPTIONS; on Windows it should be
%JAVA_TOOL_OPTIONS%.
This instruction tells systemd to create a directory /var/run/elasticsearch before starting Elasticsearch.
Without this change, the default PID_DIR (/var/run/elasticsearch) may not exist, and without it, Elasticsearch will fail to start.
The environment variable CONF_DIR was previously inconsistently used in
our packaging to customize the location of Elasticsearch configuration
files. The importance of this environment variable has increased
starting in 6.0.0 as it's now used consistently to ensure Elasticsearch
and all secondary scripts (e.g., elasticsearch-keystore) all use the
same configuration. The name CONF_DIR is there for legacy reasons yet
it's too generic. This commit renames CONF_DIR to ES_PATH_CONF.
Relates #26197
In bin/elasticsearch, we grep the command line looking for various flags
that indicate the process should be daemonized. To do this, we simply
test command status from the grep. Sadly, this is utterly broken
(unreleased) as instead we are testing the output of the command, not
the command status. This commit fixes this issue.
Relates #26196
The build was ignoring suffixes like "beta1" and "rc1" on the version numbers which was causing the backwards compatibility packaging tests to fail because they expected to be upgrading from 6.0.0 even though they were actually upgrading from 6.0.0-beta1. This adds the suffixes to the information that the build scrapes from Version.java. It then uses those suffixes when it resolves artifacts build from the bwc branch and for testing.
Closes#26017
Raw requests are supported only by the java yaml test runner and were introduced to test docs snippets. Some yaml tests ended up using them (see #23497) which causes failures for other language clients. This commit migrates those yaml tests to Java tests that send requests through the Java low-level REST client, and also moves the ability to send raw requests to a special client that's only available when testing docs snippets.
Closes#25694
Today our shell scripts march on if they encounter an error during
execution. One place that this actually causes a problem is with the
Java version checker. What can happen is this: if the user botches their
installation so that the JavaVersionChecker can not be found on the
classpath, when we attempt to run the Java version checker, first an
error message that the class can not be found is displayed, and then we
print a message that their version of Java is not compatible; this
happens even if they are using a Java 8 installation. The problem is
that we should have immediately aborted when the class could not be
loaded. Since we do not exit when the shell script encounters an error,
we end up conflating failue to run the version check with a failed
version check. Instead, we really should abort the moment that one of
our scripts encounters an error. To do this, we make the following
changes:
- enable set -e and set -o pipefail
- make the Java version checker responsible for printing the error
message to the console
- remove the exit status check from the scripts
- actually on Windows, we still have to check the exit status because
there is no equivalent of set -e
- when we check for daemonization, we can no longer check the exit
status from grep because a failed grep will abort the script;
instead, we move the grep execution to be the condition for the if as
this does not trip the set -e failure conditions
- we should source elasticsearch-env before doing anything, so we move
the definition of parse_jvm_options below sourcing elasticsearch-env
- we make consistent all places where we use a subshell to use
backticks
Relates #26057
We have a bootstrap check for the maximum size of the virtual memory
address space for the Elasticsearch process. We can set this in the
service file for Elasticsearch when installed as a service on
systemd-based systems for a better user experience than them fumbling
through thinking they should set this via /etc/security/limits.d (as a
lot of pages on the Internet would tell them) not realizing that systemd
completely ignores these for services and then trying to figure out how
to add a unit file for the Elasticsearch service.
Relates #25975
The systemd service file that ships with Elasticsearch installs on
systemd-based systems contains a suggestion for setting LimitMEMLOCK if
the user wants to enable bootstrap.memory_lock. However, this setting
this in the installed service file goes against best practices for
working with systemd, and goes against our existing documentation for
how to set this. Therefore, we should not have this suggestion in the
service file otherwise users might be led to think they should edit it
there.
Relates #25979
On non-Windows platforms, we ignore the environment variable
JAVA_TOOL_OPTIONS (this is an environment variable that the JVM respects
by default for picking up extra JVM options). The primary reason that we
ignore this because of the Jayatana agent on Ubuntu; a secondary reason
is that it produces an annoying "Picked up JAVA_TOOL_OPTIONS: ..."
output message. When the elasticsearch-env batch script was introduced
for Windows, ignoring this environment variable was deliberately not
carried over as the primary reason does not apply on Windows. However,
after additional thinking, it seems that we should simply be consistent
to the extent possible here (and also avoid that annoying "Picked up
JAVA_TOOL_OPTIONS: ..." on Windows too). This commit causes the Windows
version of elasticsearch-env to also ignore JAVA_TOOL_OPTIONS.
Relates #25968
This commit adds a bootstrap check for the maximum file size, and
ensures the limit is set correctly when Elasticsearch is installed as a
service on systemd-based systems.
Relates #25974
When invoking the elasticsearch-env.bat batch script on Windows, if the
script exits due to an error (e.g., Java can not be found, or the wrong
version of Java is found), then the script exits. Sadly, on Windows,
this does not also terminate the caller, instead returning control. This
means we have to explicitly exit so that is what we do in this commit.
Relates #25959
Today we strip some ignored JVM options before starting the main Java
process (e.g., we unset JAVA_TOOL_OPTIONS, and we ignore
JAVA_OPTS). However, there is another Java process that we start before
starting the main process: the Java version checker. We are currently
starting this before ignoring the undesired JVM options so the Java
version checker will pick up JAVA_TOOL_OPTIONS and it will silently
ignore JAVA_OPTS. Instead, we should ignore JAVA_TOOL_OPTIONS here too,
and not silently ignore JAVA_OPTS but instead warn before doing so (as
we already do for the main Java process). This commit rearranges the
execution of these steps so that we do the right thing here.
Relates #25969
This commit removes a legacy check against running bin/elasticsearch
that is not produced from a distribution. This check exists for legacy
reasons, namely when bin/elasticsearch previously sat in the root of the
Elasticsearch repository. In this old scenario, someone might clone the
repository, see the bin folder and try to run bin/elasticsearch without
first production a distribution. Today, this is unlikely since
bin/elasticsearch now sits in
distribution/src/main/resources/bin/elasticsearch so first, bin is no
longer in the root of the repository, and second, the src indicates this
is source and not already for production. Moreover, our README in the
root of the repository provides clear instructions for getting started:
either download a distribution or build one from source. In the name of
simplicity, we therefore remove this legacy check.
Relates #25960
This commit cleans up a few items with the script packaging:
- remove the now dead elasticsearch.in.sh script
- add assertions for the existence elasticsearch-env and
elasticsearch-keystore
This commit addresses a change in core Elasticsearch where the
command-line flag --path.conf is no longer respected. Instead, the
configuration path must be passed through the system property
es.path.conf. We adapt the Windows batch file and the service for this
change.
This commit fixes tests for environment-aware commands. A previous
change added a check that es.path.conf is not null. The problem is that
this system property is not being set in tests so this check trips every
single time. To fix this, we move the check into a method that can be
overridden, and then override this method in relevant places in tests to
avoid having to set the property in tests. We also add a test that this
check works as expected.
A previous change enabled it so that users could configure the
configuration path via a command-line option --path.conf. However, a
subsequent change has made it so that we expect users to set the
configuration path via the environment variable CONF_DIR. To enable
this, we now pass the value of CONF_DIR as the value for the
command-line option --path.conf. This has two problems:
- the presence of --path.conf always being on the command line breaks
other flags like --help for multi-commands
- the scripts for which --help is not broken say that you can pass
--path.conf but this is a lie since passing it will make it appear
twice in the command-line arguments breaking the script
Since --path.conf is no longer the way that we want users to set the
configuration path, we should remove the --path.conf option. However, we
still need a way to get the configuration path from the scripts to the
running Java process. To do this, we now pass the configuration path as
a system property. This keeps it off the script command line fixing the
above problems.
The only remaining question (that I can see) is whether or not to
respect -Des.path.conf=<some path> if the user sets this in their
jvm.options or via ES_JAVA_OPTS. I think that we should not do this (as
has been our tradition), es.path.home and es.path.conf are special,
should be set by our scripts only so users should not be setting them at
all so we should not take any effort to respect these flags if the user
tries to otherwise use them.
Relates #25943
When running a script that depends on elasticsearch-env, the
elasticsearch-env script seeks backwards from the directory containing
the script to find Elasticsearch home. This is done by seeking backwards
in the path to find bin, and then going one directory above
that. Unfortunately, if the script is started relatively from the bin
directory, then bin will appear in the path since it is a relative
path. This commit fixes this by making the starting path absolute before
attempting to seek backwards.
This commit removes all external dependencies from the rest client jar
and shades them in an 'org.elasticsearch.client' package within the jar
using shadowJar gradle plugin. All projects that depended on the
existing jar have been converted to using the 'org.elasticsearch.client'
package prefixes to interact with the rest client.
Closes#25208
The quoting for the ExecStart entry is broken as quotes must wrap an
entire argument, and arguments are separated by spaces. It turns out
that any quoting is unnecessary here, systemd will handle it correctly
either way.
This commit introduces the elasticsearch-env script. The purpose of this
script is threefold:
- vastly simplify the various scripts used in Elasticsearch
- provide a script that can be included in other scripts in the
Elasticsearch ecosystem (e.g., plugins)
- correctly establish the environment for all scripts (e.g., so that
users can run `elasticsearch-keystore` from a package distribution
without having to worry about setting `CONF_DIR` first, otherwise the
keystore would be created in the wrong location)
Relates #25815
This commit fixes the elasticsearch-keystore script handling of
path.conf; the problem here is that the script is setting a system
property that is completely unobserved. Instead, we use the path.conf
command line flag.
Relates #25811
This commit removes legacy checks for unsupported an environment
variable and unsupported system properties. This environment variable
and these system properties have not been supported since 1.x so it is
safe to stop checking for the existence of these settings.
Relates #25809
Today we explicitly export the HOSTNAME variable from scripts. This is
probably a relic from the days when the scripts were not run on bash but
instead assume a POSIX-compliant shell only where HOSTNAME is not
guaranteed to exist. Yet, bash guarantees that HOSTNAME is set so we do
not need to set it in scripts. This commit removes this legacy.
Relates #25807
Jason Tedor
David Roberts
olcbean
Colin Goodheart-Smithe
Simon Willnauer
Ryan Ernst
Michael Basnight
Yannick Welsch
Jordan Sissel
Nik Everett
Luca Cavanna