The changes add more granularity for identiying the data ingestion user.
The ingest pipeline can now be configure to record authentication realm and
type. It can also record API key name and ID when one is in use.
This improves traceability when data are being ingested from multiple agents
and will become more relevant with the incoming support of required
pipelines (#46847)
Resolves: #49106
This change extracts the code that previously existed in the
"Authentication" class that was responsible for reading and writing
authentication objects to/from the ThreadContext.
This is needed to support multiple authentication objects under
separate keys.
This refactoring highlighted that there were a large number of places
where we extracted the Authentication/User objects from the thread
context, in a variety of ways. These have been consolidated to rely on
the SecurityContext object.
Backport of: #52032
Refactors `DataFrameAnalyticsTask` to hold a `StatsHolder` object.
That just has a `ProgressTracker` for now but this is paving the
way to add additional stats like memory usage, analysis stats, etc.
Backport #52134
Backport: #52139
In the rolling upgrade tests, watcher is manually executed,
in rare scenarios this happens before watcher is started,
resulting in the manual execution to fail.
Relates to #33185
Employs `ResultsPersisterService` from `DataFrameRowsJoiner` in order
to add retries when a data frame analytics job is persisting the results
to the destination data frame.
Backport of #52048
Back when the distribution launchers were compiled to target JDK 7, we
did not have access to the String#join method to space-delimit JVM
options. Since the launchers now target the same minimum JDK as
Elasticsearch itself, we now have access to this method and can replace
the use of spaceDelimitJvmOptions with String#join. This commit does
that.
Previously, the dot-index rules (namely, that indices with dot-prefixed
names should be either hidden indices or system indices) was done
before* template application, and so only checked for the `index.hidden`
setting in the request, ignoring if that setting was set via a template.
This commit moves that check to a different method, which is applied
after templates have been resolved and applied to the index settings.
This commit prepares the JvmOptionsParser to be more unit testable by
refactoring the class to have some input that it pulls from external
sources passed in as arguments. We do not change any functionality in
this commit, nor add any unit tests, we are only preparing the way.
This commit converts the sysv init tests from bats tests into the java
packaging tests. Since it is the last oss specific test, the bats oss
test task is also removed.
relates #46005
This commit fixes another edge case in handling windows newlines in our
capture of stdout/stderr to log4j. The case is that the \r appears at
the beginning of the buffer when flushing, which would unintentionally
be emitted as an empty string. This commit skips the flush if only a \r
was found.
closes#51838
Make the parsing of date more lenient
- as an escaped literal: `{d '2020-02-10[[T| ]10:20[:30][.123456789][tz]]'}`
- cast a string to a date: `CAST(2020-02-10[[T| ]10:20[:30][.123456789][tz]]' AS DATE)`
Closes: #49379
(cherry picked from commit 5863b27500d5e7f6cdd8c6c62b09b84e53ca724a)
Currently, the logic for looking up `flattened` field types lives in the
top-level `FieldTypeLookup`. This PR moves it into a dedicated class
`DynamicKeyFieldTypeLookup`.
This fixes:
- the parsing of milliseconds in intervals: everything past the . used to be converted as-is to milliseconds, with no normalisation of the unit; thus, a value of .23 ended up as 23 millis in the interval, instead of 230.
- the printing of a trailing .0, in case the interval lacks the fractional part;
- tests generating a random millisecond value used to simply print it in the string about to be evaluated without a necessary front-filling of 0[s], where the amount was below 100/10.
(The combination of first and last issues above, plus statistical "luck" made the incorrect handling pass the tests.)
(cherry picked from commit 4de8c64f63ee37c1bcfdb9b9d3a07d09be243222)
When docker-compose is required for a test fixture but is not
available, we warn log a message to this effect. This ends up being
noise during configuration, especially when working locally. This
commit changes the logging level of these messages to debug.
* Allow forcemerge in the hot phase for ILM policies
This commit changes the `forcemerge` action to also be allowed in the `hot` phase for policies. The
forcemerge will occur after a rollover, and allows users to take advantage of higher disk speeds for
performing the force merge (on a separate node type, for example).
On caveat with this is that a `forcemerge` in the `hot` phase *MUST* be accompanied by a `rollover`
action. ILM validates policies to ensure this is the case.
Resolves#43165
* Use anyMatch instead of findAny in validation
* Make randomTimeseriesLifecyclePolicy single-pass
Segment(s) info blobs are already stored with their full content
in the "hash" field in the shard snapshot metadata as long as they are
smaller than 1MB. We can make use of this fact and never upload them
physically to the repo.
This saves a non-trivial number of uploads and downloads when restoring
and might also lower the latency of searchable snapshots since they can save
phyiscally loading this information as well.
It's perfectly fine if a bulk request on the follower hits
IndexShardClosedException in some CCR tests because we sometimes
close some follower shards while the follow-task is replicating operations.
Instead of failing the test immediately, this commit bubbles up that
failure to the shard follow task.
Closes#52052
Allow also whitespace ` ` (together with `T`) as a separator between
date and time parts of the timestamp string. E.g.:
```
{ts '2020-02-08 12.10.45'}
```
or
```
{ts '2020-02-08T12.10.45'}
```
Fixes: #46069
(cherry picked from commit 07c977023fb8ceab5991c359a6cbfe07beaad9bb)
This change adds support for the following new model_size_stats
fields:
- categorized_doc_count
- total_category_count
- frequent_category_count
- rare_category_count
- dead_category_count
- categorization_status
Backport of #51879
- Enable SunJGSS provider for Kerberos tests
- Handle the fact that in the decrypt method in KeyStoreWrapper might
not throw immediately when the GCM cipher is from BouncyCastle FIPS
and we end up with a DataInputStream that has reached it's end.
- Disable tests, jarHell, testingConventions for ingest attachment
plugin. We don't support this plugin (and document this) in FIPS
mode.
- Don't attempt to install ingest-attachment in smoke-test-plugins
This commit changes how RestHandlers are registered with the
RestController so that a RestHandler no longer needs to register itself
with the RestController. Instead the RestHandler interface has new
methods which when called provide information about the routes
(method and path combinations) that are handled by the handler
including any deprecated and/or replaced combinations.
This change also makes the publication of RestHandlers safe since they
no longer publish a reference to themselves within their constructors.
Closes#51622
Co-authored-by: Jason Tedor <jason@tedor.me>
Backport of #51950
Now that the FIPS 140 security provider is simply a test dependency
we don't need the thirdPartyAudit exceptions, but plugin-cli and
transport-netty4 do need jarHell disabled as they use the non fips
BouncyCastle security provider as a test dependency too.
We might leak a searcher if the target shard is removed (i.e., its index
is deleted) or relocated while we are creating a SearchContext from a
SearchRewriteContext.
Relates #51708Closes#52021
I labelled this non-issue for an unreleased bug introduced in #51708.
Some parts of the User class (e.g. equals/hashCode) assumed that
principal could never be null, but the constructor didn't enforce
that.
This adds a null check into the constructor and fixes a few tests that
relied on being able to pass in null usernames.
Backport of: #51988
The REST tests for autoscaling either need to be skipped in a
non-snapshot build, or alternatively, the feature flag registered so
that autoscaling can be enabled. We prefer the latter approach, as it
allows us to also test autoscaling in non-snapshot builds incrementally,
instead of at the end of development as autoscaling prepares for
release. This commit registers the autoscaling feature flag in REST
tests for non-snapshot builds.
We can just put the `IndexId` instead of just the index name into the recovery soruce and
save one load of `RepositoryData` on each shard restore that way.
Add some more tests where more than one literal is selected,
unaliased and aliased.
Follows: #42121
(cherry picked from commit 405271d408a233e697eb2e9ded3005a71f4df5e7)
This commit introduces the ability to override JVM options by adding
custom JVM options files to a jvm.options.d directory. This simplifies
administration of Elasticsearch by not requiring administrators to keep
the root jvm.options file in sync with changes that we make to the root
jvm.options file. Instead, they are not expected to modify this file but
instead supply their own in jvm.options.d. In Docker installations, this
means they can bind mount this directory in. In future versions of
Elasticsearch, we can consider removing the root jvm.options file
(instead, providing all options there as system JVM options).
We need to either exclude null responses from the scroll search response
or always create a search context for every target shards, although that
scroll query can be written to match_no_docs. Otherwise, we won't find
search_context for subsequent scroll requests.
This commit implements the latter option as it's less error-prone.
Relates #51708
In the packaging tests, we added convenience methods for asserting file
existence and file non-existence. This commit replaces the remaining
uses of assertFalse/assertTrue in favor of these dedicated matchers.