This commit adds the SPDX Apache-2.0 license header along with an additional
copyright header for all modifications.
Signed-off-by: Nicholas Walter Knize <nknize@apache.org>
This commit refactors the remaining o.e.index and o.e.test packages in the
test/fixtures module. References throughout the codebase are also refactored.
Signed-off-by: Nicholas Walter Knize <nknize@apache.org>
* Rename directory elasticsearch to opensearch
Rename EvilElasticsearchCliTests EvilOpenSearchCliTests
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename org.elasticsearch to org.opensearch
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename waitForElasticsearch to waitForOpenSearch
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename OpensearchNode to OpenSearchNode
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename "elasticsearch.version" to "opensearch.version"
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearchVersionString to opensearchVersionString
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearch.yml to opensearch.yml
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename runElasticsearchTests to runOpenSearchTests
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearchVersion to opensearchVersion
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearch to opensearch in gradle files
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename ElasticsearchAssertions to OpenSearchAssertions
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename folder share/elasticsearch to share/opensearch
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearch to opensearch
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearch-service-x64 to opensearch-service-x64
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearch-service.bat to opensearch-service.bat
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename Elasticsearch to Opensearch
Rename elasticsearch to opensearch
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename ELASTIC_PASSWORD_FILE to OPENSEARCH_PASSWORD_FILE
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename ELASTICSEARCH_PASSWORD to OPENSEARCH_PASSWORD
Rename elasticsearch to opensearch
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearch to opensearch
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearch.log to opensearch.log
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename es-repo to opensearch-repo
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename ESTestCase to OpenSearchTestCase
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename ESRestTestCase to OpenSearchRestTestCase
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearch to opensearch
Rename "Starts ElasticSearch" to "Starts OpenSearch"
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename ESElasticsearchCliTestCase to BaseOpenSearchCliTestCase
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename "elasticsearch:test" to "opensearch:test"
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename test91ElasticsearchShardCliPackaging to test91OpenSearchShardCliPackaging
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearch.toString to opensearch.toString
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename elasticsearch.pid to opensearch.pid
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename "Opensearch" to "OpenSearch"
Rename "elasticsearch" to "opensearch"
Signed-off-by: Harold Wang <harowang@amazon.com>
* Rename Elasticsearch to OpenSearch
Remove unecessary dot after opensearch.
Signed-off-by: Harold Wang <harowang@amazon.com>
* [Rename] Rename qa folder
Signed-off-by: Harold Wang <harowang@amazon.com>
* Remove the dot in the end of "package org.opensearch."
Signed-off-by: Harold Wang <harowang@amazon.com>
* Add semicolon
Signed-off-by: Harold Wang <harowang@amazon.com>
There are currently half a dozen ways to add plugins and modules for
test clusters to use. All of them require the calling project to peek
into the plugin or module they want to use to grab its bundlePlugin
task, and then both depend on that task, as well as extract the archive
path the task will produce. This creates cross project dependencies that
are difficult to detect, and if the dependent plugin/module has not yet
been configured, the build will fail because the task does not yet
exist.
This commit makes the plugin and module methods for testclusters
symmetetric, and simply adding a file provider directly, or a project
path that will produce the plugin/module zip. Internally this new
variant uses normal configuration/dependencies across projects to get
the zip artifact. It also has the added benefit of no longer needing the
caller to add to the test task a dependsOn for bundlePlugin task.
This commit creates a new Gradle plugin to provide a separate task name
and source set for running YAML based REST tests. The only project
converted to use the new plugin in this PR is distribution/archives/integ-test-zip.
For which the testing has been moved to :rest-api-spec since it makes the most
sense and it avoids a small but awkward change to the distribution plugin.
The remaining cases in modules, plugins, and x-pack will be handled in followups.
This plugin is distinctly different from the plugin introduced in #55896 since
the YAML REST tests are intended to be black box tests over HTTP. As such they
should not (by default) have access to the classpath for that which they are testing.
The YAML based REST tests will be moved to separate source sets (yamlRestTest).
The which source is the target for the test resources is dependent on if this
new plugin is applied. If it is not applied, it will default to the test source
set.
Further, this introduces a breaking change for plugin developers that
use the YAML testing framework. They will now need to either use the new source set
and matching task, or configure the rest resources to use the old "test" source set that
matches the old integTest task. (The former should be preferred).
As part of this change (which is also breaking for plugin developers) the
rest resources plugin has been removed from the build plugin and now requires
either explicit application or application via the new YAML REST test plugin.
Plugin developers should be able to fix the breaking changes to the YAML tests
by adding apply plugin: 'elasticsearch.yaml-rest-test' and moving the YAML tests
under a yamlRestTest folder (instead of test)
This change converts the module and plugin parameters
for testClusters to be lazy. Meaning that the values
are not resolved until they are actually used. This
removes the requirement to use project.afterEvaluate to
be able to resolve the bundle artifact.
Note - this does not completely remove the need for afterEvaluate
since it is still needed for the custom resource extension.
- Enable SunJGSS provider for Kerberos tests
- Handle the fact that in the decrypt method in KeyStoreWrapper might
not throw immediately when the GCM cipher is from BouncyCastle FIPS
and we end up with a DataInputStream that has reached it's end.
- Disable tests, jarHell, testingConventions for ingest attachment
plugin. We don't support this plugin (and document this) in FIPS
mode.
- Don't attempt to install ingest-attachment in smoke-test-plugins
This commit moves the repository-s3 fixture test added in #29296 in a
new `repository-s3/qa/amazon-s3` project. This new project allows the
REST integration tests to be executed using the real S3 service when
all the required environment variables are provided. When no env var
is provided, then the tests are executed using the fixture added
in #29296.
The REST tests located at the `repository-s3`plugin project now only
verify that the plugin is correctly loaded.
The REST tests have been adapted to allow a bucket name and a base
path to be specified as env vars. This way it is possible to run the tests
with different base paths (could be anything, like a CI job name or a
branch name) without multiplicating buckets.
Related to #29349
This commit renames all rest test files to use the .yml extension
instead of .yaml. This way the extension used within all of
elasticsearch for yaml is consistent.
This change simplifies how the rest test runner finds test files and
removes all leniency. Previously multiple prefixes and suffixes would
be tried, and tests could exist inside or outside of the classpath,
although outside of the classpath never quite worked. Now only classpath
tests are supported, and only one resource prefix is supported,
`/rest-api-spec/tests`.
closes#20240
Gradle's finalizedBy on tasks only ensures one task runs after another,
but not immediately after. This is problematic for our integration tests
since it allows multiple project's integ test clusters to be
simultaneously. While this has not been a problem thus far (gradle 2.13
happened to keep the finalizedBy tasks close enough that no clusters
were running in parallel), with gradle 3.3 the task graph generation has
changed, and numerous clusters may be running simultaneously, causing
memory pressure, and thus generally slower tests, or even failure if the
system has a limited amount of memory (eg in a vagrant host).
This commit reworks how integ tests are configured. It adds an
`integTestCluster` extension to gradle which is equivalent to the current
`integTest.cluster` and moves the rest test runner task to
`integTestRunner`. The `integTest` task is then just a dummy task,
which depends on the cluster runner task, as well as the cluster stop
task. This means running `integTest` in one project will both run the
rest tests, and shut down the cluster, before running `integTest` in
another project.
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
At one point in the past when moving out the rest tests from core to
their own subproject, we had multiple test classes which evenly split up
the tests to run. However, we simplified this and went back to a single
test runner to have better reproduceability in tests. This change
removes the remnants of that multiplexing support.
This makes it obvious that these tests are for running the client yaml
suites. Now that there are other ways of running tests using the REST
client against a running cluster we can't go on calling the shared
client yaml tests "REST tests". They are rest tests, but they aren't
**the** rest tests.
This adds a header that looks like `Location: /test/test/1` to the
response for the index/create/update API. The requirement for the header
comes from https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.htmlhttps://tools.ietf.org/html/rfc7231#section-7.1.2 claims that relative
URIs are OK. So we use an absolute path which should resolve to the
appropriate location.
Closes#19079
This makes large changes to our rest test infrastructure, allowing us
to write junit tests that test a running cluster via the rest client.
It does this by splitting ESRestTestCase into two classes:
* ESRestTestCase is the superclass of all tests that use the rest client
to interact with a running cluster.
* ESClientYamlSuiteTestCase is the superclass of all tests that use the
rest client to run the yaml tests. These tests are shared across all
official clients, thus the `ClientYamlSuite` part of the name.
This change removes the multiple ways that plugins can be added to the
integ test cluster. It also removes the use of the default
configuration, and instead adds a zip configuration to all plugins. This
will enable using project substitutions with plugins, which must be done
with the default configuration.
This change adds a Fixture class for use by gradle. A Fixture is an
external process that integration tests will use. It can be added as a
dependsOn for integTest, and will automatically be shutdown upon success
or failure, as well as relevant information dumped on failure. There is
also an example fixture in this change.
We currently use the full suite of packaged rest tests for each
distribution. We also used to run rest tests within core integ tests,
but this stopped working when we split out the test-framework, since the
test files are in there.
This change simplifies the code to run packaged rest tests just once,
for the integ-test-zip, and removes the unused rest tests from
test-framework. Distributions rest tests now check that all modules
were loaded.
The current mechanism for adding plugins to the integTest cluster is to
have a FileCollection. This works well for the integTests for a single
plugin, which automatically adds itself to be installed. However, for qa
tests where many plugins may be installed, and from other projects, it
is cumbersome to add configurations, dependencies and dependsOn
statements over and over. This simplifies installing a plugin from
another project by moving this common setup into the cluster
configuration code.
Many other improvements:
* Use spaces in ES path
* Use space in path for plugin file installation
* Use a different cwd than ES home
* Use jps to ensure process being stopped is actually elasticsearch
* Stop ES if pid file already exists
* Delete pid file when successfully killed
Also, refactored the cluster formation code to be a little more organized.
closes#14464
This change removes the leftover pom files. A couple files were left for
reference, namely in qa tests that have not yet been migrated (vagrant
and multinode). The deb and rpm assemblies also still exist for
reference when finishing their setup in gradle.
See #13930
Until now we had a cloud-azure plugin which is providing 3 distinct features:
* discovery on Azure
* snapshot/restore on Aure
* SMB store
This commit splits the plugin by feature so people can use either one or the other or both features.
Doc is updated accordingly.
Until now we had a cloud-aws plugin which is providing 2 disctinct features:
* discovery on EC2
* snapshot/restore on S3
This commit splits the plugin by feature so people can use either one or the other or both features.
Doc is updated accordingly.
commons-lang really is only used by some core classes to join strings or modiy arrays.
It's not worth carrying the dependency. This commit removes the dependency on commons-lang
entirely.
In plugins, we are using non consistent naming. We use `elasticsearch-cloud-aws` as the artifactId, which generates a jar file called `elasticsearch-cloud-aws-VERSION.jar`.
But when you want to install the plugin, you will end up with a shorter name for the plugin `cloud-aws`.
```
bin/plugin install cloud-aws
```
This commit changes that and use consistent names for `artifactId`, so `finalName`.
Also changed maven names.
This move the `murmur3` field to the `mapper-murmur3` plugin and fixes its
defaults so that values will not be indexed by default, as the only purpose
of this field is to speed up `cardinality` aggregations on high-cardinality
string fields, which only requires doc values.
I also removed the `rehash` option from the `cardinality` aggregation as it
doesn't bring much value (rehashing is cheap) and allowed to remove the
coupling between the `cardinality` aggregation and the `murmur3` field.
Close#12874
the default classloader. It had all kinds of leniency in how the
classname was found, and simply cannot work with plugins having isolated
classloaders.
This change removes that method. Some of the uses of it were for custom
extension points, like custom repository or discovery types. A lot were
just there to plugin mock implementations for tests. For the settings
that were legitimate, all now support plugins adding the given setting
via onModule. For those that were specific to tests for mocks, they now
use Classes.loadClass (a helper around Class.forName). This is a
temporary measure until (in a future PR) tests can change the
implementation via package private statics.
I also removed a number of unnecessary intermediate modules, added a
"jvm-example" plugin that can be filled in in the future as a smoke test
for breaking plugins, and gave some documentation to "spawn" modules
interface.
closes#12643closes#12656
this commit adds a simple integration test that starts a
node from a shaded jar, indexes a doc and retrieves it. It
also has some basic unittests that try to load shaded classes and ensure
that their counterpart is not in the classpath.
Closes#12711
Owais Kazi
Nick Knize
Nick Knize
Harold Wang
Ryan Ernst
Jake Landis
Ioannis Kakavas
Alpar Torok
Tanguy Leroux
Ryan Ernst
Nik Everett
Robert Muir
Jason Tedor
David Pilato
Simon Willnauer
Adrien Grand