This PR removes all leniency in the conversion of Strings to booleans: "true"
is converted to the boolean value `true`, "false" is converted to the boolean
value `false`. Everything else raises an error.
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
At one point in the past when moving out the rest tests from core to
their own subproject, we had multiple test classes which evenly split up
the tests to run. However, we simplified this and went back to a single
test runner to have better reproduceability in tests. This change
removes the remnants of that multiplexing support.
Today we hold on to all possible tokenizers, tokenfilters etc. when we create
an index service on a node. This was mainly done to allow the `_analyze` API to
directly access all these primitive. We fixed this in #19827 and can now get rid of
the AnalysisService entirely and replace it with a simple map like class. This
ensures we don't create a gazillion long living objects that are entirely useless since
they are never used in most of the indices. Also those objects might consume a considerable
amount of memory since they might load stopwords or synonyms etc.
Closes#19828
This makes it obvious that these tests are for running the client yaml
suites. Now that there are other ways of running tests using the REST
client against a running cluster we can't go on calling the shared
client yaml tests "REST tests". They are rest tests, but they aren't
**the** rest tests.
This adds a header that looks like `Location: /test/test/1` to the
response for the index/create/update API. The requirement for the header
comes from https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.htmlhttps://tools.ietf.org/html/rfc7231#section-7.1.2 claims that relative
URIs are OK. So we use an absolute path which should resolve to the
appropriate location.
Closes#19079
This makes large changes to our rest test infrastructure, allowing us
to write junit tests that test a running cluster via the rest client.
It does this by splitting ESRestTestCase into two classes:
* ESRestTestCase is the superclass of all tests that use the rest client
to interact with a running cluster.
* ESClientYamlSuiteTestCase is the superclass of all tests that use the
rest client to run the yaml tests. These tests are shared across all
official clients, thus the `ClientYamlSuite` part of the name.
creation in the REST tests, as we no longer need it due
to index creation now waiting for active shard copies
before returning (by default, it waits for the primary of
each shard, which is the same as ensuring yellow health).
Relates #19450
Today throughout the codebase, catch throwable is used with reckless
abandon. This is dangerous because the throwable could be a fatal
virtual machine error resulting from an internal error in the JVM, or an
out of memory error or a stack overflow error that leaves the virtual
machine in an unstable and unpredictable state. This commit removes
catch throwable from the codebase and removes the temptation to use it
by modifying listener APIs to receive instances of Exception instead of
the top-level Throwable.
Relates #19231
Instead of plugins calling `registerTokenizer` to extend the analyzer
they now instead have to implement `AnalysisPlugin` and override
`getTokenizer`. This lines up extending plugins in with extending
scripts. This allows `AnalysisModule` to construct the `AnalysisRegistry`
immediately as part of its constructor which makes testing anslysis
much simpler.
This also moves the default analysis configuration into `AnalysisModule`
which is how search is setup.
Like `ScriptModule`, `AnalysisModule` no longer extends `AbstractModule`.
Instead it is only responsible for building `AnslysisRegistry`. We still
bind `AnalysisRegistry` but we only do so in `Node`. This is means it
is available at module construction time so we slowly remove the need to
bind it in guice.
This is the same as what Lucene does for its analysis factories, and we hawe
tests that make sure that the elasticsearch factories are in sync with
Lucene's. This is a first step to move forward on #9978 and #18064.
In 2.0 we added plugin descriptors which require defining a name and
description for the plugin. However, we still have name() and
description() which must be overriden from the Plugin class. This still
exists for classpath plugins. But classpath plugins are mainly for
tests, and even then, referring to classpath plugins with their class is
a better idea. This change removes name() and description(), replacing
the name for classpath plugins with the full class name.
Failing the build on deprecation warnings was removed in
19b3ec88af. This commit removes the
suppressed deprecation warnings so that their use is surfaced in the
build now.
Relates #18582
Lucene allows to create a ICUTokenizer with a special config argument
enabling the customization of the rule based iterator by providing
custom rules files.
This commit enable this feature. Users could provide a list of RBBI rule
files to ICU tokenizer.
closes#13146
We have both `Settings.settingsBuilder` and `Settings.builder` that do exactly
the same thing, so we should keep only one. I kept `Settings.builder` since it
has my preference but also it is the one that we use in examples of the Java API.
Today we allow to set all kinds of index level settings on the node level which
is error prone and difficult to get right in a consistent manner.
For instance if some analyzers are setup in a yaml config file some nodes might
not have these analyzers and then index creation fails.
Nevertheless, this change allows some selected settings to be specified on a node level
for instance:
* `index.codec` which is used in a hot/cold node architecture and it's value is really per node or per index
* `index.store.fs.fs_lock` which is also dependent on the filesystem a node uses
All other index level setting must be specified on the index level. For existing clusters the index must be closed
and all settings must be updated via the API on each of the indices.
Closes#16799
Closes#16964
Squashed commit of the following:
commit a23f9d2d29220991aa498214530753d7a5a148c6
Merge: eec9c4e 0b0a251
Author: Robert Muir <rmuir@apache.org>
Date: Mon Mar 7 04:12:02 2016 -0500
Merge branch 'master' into lucene6
commit eec9c4e5cd11e9c3e0b426f04894bb2a6dae4f21
Merge: bc67205 675d940
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 13:45:00 2016 -0500
Merge branch 'master' into lucene6
commit bc67205bdfe1526eae277ab7856fc050ecbdb7b2
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 09:56:31 2016 -0500
fix test bug
commit a60723b007ff12d97b1810cef473bd7b553a0327
Author: Simon Willnauer <simonw@apache.org>
Date: Fri Mar 4 15:35:35 2016 +0100
Fix SimpleValidateQueryIT to put braces around boosted terms
commit ae3a49d7ba7ced448d2a5262e5d8ec98671a9090
Author: Simon Willnauer <simonw@apache.org>
Date: Fri Mar 4 15:27:25 2016 +0100
fix multimatchquery
commit ae23fdb88a8f6d3fb7ba60fd1aaf3fd72d899aa5
Author: Simon Willnauer <simonw@apache.org>
Date: Fri Mar 4 15:20:49 2016 +0100
Rewrite DecayFunctionScoreIT to be independent of the similarity used
This test relied a lot on the term scoring and compared scores
that are dependent on the similarity. This commit changes the base query
to be a predictable constant score query.
commit 366c2d518c35d31251033f1b6f6a93f6e2ae327d
Author: Simon Willnauer <simonw@apache.org>
Date: Fri Mar 4 14:06:14 2016 +0100
Fix scoring in tests due to changes to idf calculation.
Lucene 6 uses a different default similarity as well as a different
way to calculate IDF. In contrast to older version lucene 6 uses docCount per field
to calculate the IDF not the # of docs in the index to overcome the sparse field
cases.
commit dac99fd64ac2fa71b8d8d106fe68825e574c49f8
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 08:21:57 2016 -0500
don't hardcoded expected termquery score
commit 6e9f340ba49ab10eed512df86d52a121aa775b0f
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 08:04:45 2016 -0500
suppress deprecation warning until migrated to points
commit 3ac8908424b3fdad44a90a4f7bdb3eff7efd077d
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 07:21:43 2016 -0500
Remove invalid test: all commits have IDs, and its illegal to do this.
commit c12976288124ad1a26467e7e848fb810548e7eab
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 07:06:14 2016 -0500
don't test with unsupported back compat
commit 18bbfe76128570bc70883bf91ff4c44c82d27817
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 07:02:18 2016 -0500
remove now invalid lucene 4 backcompat test
commit 7e730e572886f0ef2d3faba712e4256216ff01ec
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 06:58:52 2016 -0500
remove now invalid lucene 4 backwards test
commit 244d2ab6868ba5ac9e0bcde3c2833743751a25ec
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 06:47:23 2016 -0500
use 6.0 codec
commit 5f64d4a431a6fdaa1234adca23f154c2a1de8284
Author: Robert Muir <rmuir@apache.org>
Date: Fri Mar 4 06:43:08 2016 -0500
compile, javadocs, forbidden-apis, etc
commit 1f273cd62a7fe9ca8f8944acbbfc5cbdd3d81ccb
Merge: cd33921 29e3443
Author: Simon Willnauer <simonw@apache.org>
Date: Fri Mar 4 10:45:29 2016 +0100
Merge branch 'master' into lucene6
commit cd33921ac742ef9fb351012eff35f3c7dbda7264
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:58:37 2016 -0500
fix hunspell dictionary loading
commit c7fdbd837b01f7defe9cb1c24e2ec65604b0dc96
Merge: 4d4190f d8948ba
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:41:53 2016 -0500
Merge branch 'master' into lucene6
commit 4d4190fd82601aaafac6b8254ccb3edf218faa34
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:39:14 2016 -0500
remove nocommit
commit 77ca69e288b1a41aa9595c921ed166c272a00ea8
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:38:24 2016 -0500
clean up numericutils vs legacynumericutils
commit a466d696fbaad04b647ffbc0857a9439b583d0bf
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:32:43 2016 -0500
upgrade spatial4j
commit 5412c747a8cfe638bacedbc8233163cb75cc3dc5
Author: Robert Muir <rmuir@apache.org>
Date: Thu Mar 3 23:19:28 2016 -0500
move to 6.0.0-snapshot-8eada27
commit b32bfe924626b87e540692375ece09e7c2edb189
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 11:30:09 2016 +0100
Fix some test compile errors.
commit 6ccde35e9840b03c68d1a2cd47c7923a06edf64a
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 11:25:51 2016 +0100
Current Lucene version is 6.0.0.
commit f62e1015d931b4cc04c778298a8fa1ba65e97ad9
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 11:20:48 2016 +0100
Fix compile errors in NGramTokenFilterFactory.
commit 6837c6eabf96075f743649da9b9b52dd39611c58
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 10:50:59 2016 +0100
Fix the edge ngram tokenizer/filter.
commit ccd7f070de5efcdfbeb34b9555c65c4990bf1ba6
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 10:42:44 2016 +0100
The missing value is now accessible through a getter.
commit bd3b77f9b28e5b05daa3d49683a9922a6baf2963
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 10:41:51 2016 +0100
Remove IndexCacheableQuery.
commit 05f3091c347aeae80eeb16349ac51d2b53cf86f7
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 10:39:43 2016 +0100
Fix compilation of function_score queries.
commit 81cda79a2431ac78f56b0cc5a5765387f662d801
Author: Adrien Grand <jpountz@gmail.com>
Date: Thu Mar 3 10:35:02 2016 +0100
Fix compile errors in BlendedTermQuery.
commit 70994ce8dd1eca0b995870974a38e20f26f96a7b
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 23:33:03 2016 -0500
add bug ID
commit 29d4f1a71f36f646b5a6060bed3db019564a279d
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 21:02:32 2016 -0500
easy .store changes
commit 5e1a1e6fd665fa455e88d3a8987362fad5f44bb1
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 20:47:24 2016 -0500
cleanups mostly around boosting
commit 333a669ec6c305ada5645d13ed1da0e19ec1d053
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 20:27:56 2016 -0500
more simple fixes
commit bd5cd98a1e089c866b6b4a5e159400b110140ce6
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 19:49:38 2016 -0500
more easy fixes and removal of ancient cruft
commit a68f419ee47da5f9c9ce5b372f01d707e902474c
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 19:35:02 2016 -0500
cutover numerics
commit 4ca5dc1fa47dd5892db00899032133318fff3116
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 18:34:18 2016 -0500
fix some constants
commit 88710a17817086e477c6c021ec346d0534b7fb88
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 18:14:25 2016 -0500
Add spatial-extras jar as a core dependency
commit c8cd6726583e5ce3f546ed355d4eca037164a30d
Author: Robert Muir <rmuir@apache.org>
Date: Wed Mar 2 18:03:33 2016 -0500
update to lucene 6 jars
This commit removes the ability to use string fields on indices created on or
after 5.0. Dynamic mappings now generate text fields by default for strings
but there are plans to also add a sub keyword field (in a future PR).
Most of the changes in this commit are just about replacing string with
keyword or text. Some tests have been removed because they existed because of
corner cases of string mappings like setting ignore-above on a text field or
enabling term vectors on a keyword field which are now impossible.
The plan is to remove strings entirely in 6.0.
The big win here is catching tests that are incorrectly named and will
be skipped by gradle, providing a false sense of security.
The whole thing takes about 10 seconds on my Macbook Air, not counting
compiling the test classes, which seems worth it. Because this runs as
a gradle task with propery UP-TO-DATE handling it can be skipped if the
tests haven't been changed which should save some time.
I chose to keep this in test:framework rather than a new subproject of
buildSrc because ESIntegTestCase and doesn't inroduce any additional
dependencies.
This change rewrites the entire settings filtering mechanism to be immutable.
All filters must be registered up-front in the SettingsModule. Filters that are comma-sparated are
not allowed anymore and check on registration.
This commit also adds settings filtering to the default settings recently added to ensure we don't render
filtered settings.
In the early days Elasticsearch used to use the index name as the index identity. Around 1.0.0 we introduced a unique index uuid which is stored in the index setting. Since then we used that uuid in a few places but it is by far not the main identifier when working with indices, partially because it's not always readily available in all places.
This PR start to make a move in the direction of using uuids instead of name by making sure that the uuid is available on the Index class (currently just a wrapper around the name) and as such also available via ShardRouting and ShardId.
Note that this is by no means an attempt to do the right thing with the uuid in all places. In almost all places it falls back to the name based comparison that was done before. It is meant as a first step towards slowly improving the situation.
Closes#16217
The rest test framework, because it used to be tightly integrated with
ESIntegTestCase, currently expects the addresses for the test cluster to
be passed using the transport protocol port. However, it only uses this
to then find the http address.
This change makes ESRestTestCase extend from ESTestCase instead of
ESIntegTestCase, and changes the sysprop used to tests.rest.cluster,
which now takes the http address.
closes#15459
This change moves all the analysis component registration to the node level
and removes the significant API overhead to register tokenfilter, tokenizer,
charfilter and analyzer. All registration is done without guice interaction such
that real factories via functional interfaces are passed instead of class objects
that are instantiated at runtime.
This change also hides the internal analyzer caching that was done previously in the
IndicesAnalysisService entirely and decouples all analysis registration and creation
from dependency injection.
The @IndexSettings annoationat has been used to differentiate between node-level
and index level settings. It was also decoupled from realtime-updates such that
the settings object that a class got injected when it was created was static and
not subject to change when an update was applied. This change removes the annoation
and replaces it with a full-fledged class that adds type-safety and encapsulates additional
functionality as well as checks on the settings.
There are three ways `@Test` was used. Way one:
```java
@Test
public void flubTheBlort() {
```
This way was always replaced with:
```java
public void testFlubTheBlort() {
```
Or, maybe with a better method name if I was feeling generous.
Way two:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
methodThatThrows();
}
```
This way of using `@Test` is actually pretty OK, but to get the tools to ban
`@Test` entirely it can't be used. Instead:
```java
public void testFoo() {
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
This is longer but tests more than the old ways and is much more precise.
Compare:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
methodThatThrows();
code(); // <---- This was left here by mistake and is never called
}
```
to:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
The final use of test is:
```java
@Test(timeout=1000)
public void testFoo() {
methodThatWasSlow();
}
```
This is the most insidious use of `@Test` because its tempting but tragically
flawed. Its flaws are:
1. Hard and fast timeouts can look like they are asserting that something is
faster and even do an ok job of it when you compare the timings on the same
machine but as soon as you take them to another machine they start to be
invalid. On a slow VM both the new and old methods fail. On a super-fast
machine the slower and faster ways succeed.
2. Tests often contain slow `assert` calls so the performance of tests isn't
sure to predict the performance of non-test code.
3. These timeouts are rude to debuggers because the test just drops out from
under it after the timeout.
Confusingly, timeouts are useful in tests because it'd be rude for a broken
test to cause CI to abort the whole build after it hits a global timeout. But
those timeouts should be very very long "backstop" timeouts and aren't useful
assertions about speed.
For all its flaws `@Test(timeout=1000)` doesn't have a good replacement __in__
__tests__. Nightly benchmarks like http://benchmarks.elasticsearch.org/ are
useful here because they run on the same machine but they aren't quick to check
and it takes lots of time to figure out the regressions. Sometimes its useful
to compare dueling implementations but that requires keeping both
implementations around. All and all we don't have a satisfactory answer to the
question "what do you replace `@Test(timeout=1000)`" with. So we handle each
occurrence on a case by case basis.
For files with `@Test` this also:
1. Removes excess blank lines. They don't help anything.
2. Removes underscores from method names. Those would fail any code style
checks we ever care to run and don't add to readability. Since I did this manually
I didn't do it consistently.
3. Make sure all test method names start with `test`. Some used to end in `Test` or start
with `verify` or `check` and they were picked up using the annotation. Without the
annotation they always need to start with `test`.
4. Organizes imports using the rules we generate for Eclipse. For the most part
this just removes `*` imports which is a win all on its own. It was "required"
to quickly remove `@Test`.
5. Removes unneeded casts. This is just a setting I have enabled in Eclipse and
forgot to turn off before I did this work. It probably isn't hurting anything.
6. Removes trailing whitespace. Again, another Eclipse setting I forgot to turn
off that doesn't hurt anything. Hopefully.
7. Swaps some tests override superclass tests to make them empty with
`assumeTrue` so that the reasoning for the skips is logged in the test run and
it doesn't "look like" that thing is being tested when it isn't.
8. Adds an oxford comma to an error message.
The total test count doesn't change. I know. I counted.
```bash
git checkout master && mvn clean && mvn install | tee with_test
git no_test_annotation master && mvn clean && mvn install | tee not_test
grep 'Tests summary' with_test > with_test_summary
grep 'Tests summary' not_test > not_test_summary
diff with_test_summary not_test_summary
```
These differ somewhat because some tests are skipped based on the random seed.
The total shouldn't differ. But it does!
```
1c1
< [INFO] Tests summary: 564 suites (1 ignored), 3171 tests, 31 ignored (31 assumptions)
---
> [INFO] Tests summary: 564 suites (1 ignored), 3167 tests, 17 ignored (17 assumptions)
```
These are the core unit tests. So we dig further:
```bash
cat with_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > with_test_suites
cat not_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > not_test_suites
diff <(sort with_test_suites) <(sort not_test_suites)
```
The four tests with lower test numbers are all extend `AbstractQueryTestCase`
and all have a method that looks like this:
```java
@Override
public void testToQuery() throws IOException {
assumeTrue("test runs only when at least a type is registered", getCurrentTypes().length > 0);
super.testToQuery();
}
```
It looks like this method was being double counted on master and isn't anymore.
Closes#14028
Plugin tests require having rest-api tests, and currently copy that spec
from a directory in the root of the plugin source into the test
resources. This change moves the rest-api-spec dir into test resources
so it is like any other test resources. It also removes unnecessary
configuration for resources from the shared plugin pom.
When running a RestIT test from the IDE, you actually start an internal node which does not automatically load the plugin you would like to test.
We need to add:
```java
@Override
protected Collection<Class<? extends Plugin>> nodePlugins() {
return pluginList(PLUGIN_HERE.class);
}
```
Everything works fine when running from maven because each test basically:
* installs elasticsearch
* installs one plugin
* starts elasticsearch with this plugin loaded
* runs the test
Note that this PR only fixes the fact we run an internal cluster with the expected plugin.
Cloud tests will still fail when run from the IDE because is such a case you actually start an internal node with many mock plugins.
And REST test suite for cloud plugins basically checks if the plugin is running by checking the output of NodesInfo API.
And we check:
```yml
- match: { nodes.$master.plugins.0.name: cloud-azure }
- match: { nodes.$master.plugins.0.jvm: true }
```
But in that case, this condition is certainly false as we started also `mock-transport-service`, `mock-index-store`, `mock-engine-factory`, `node-mocks`, `asserting-local-transport`, `mock-search-service`.
Closes#13479
The Plugin interface currently contains 6 different methods for
adding modules. Elasticsearch has 3 different levels of injectors,
and for each of those, there are two methods. The first takes no
arguments and returns a collection of class objects to construct. The
second takes a Settings object and returns a collection of module
objects already constructed. The settings argument is unecessary because
the plugin can already get the settings from its constructor. Removing
that, the only difference between the two versions is returning an
already constructed Module, or a module Class, and there is no reason
the plugin can't construct all their modules themselves.
This change reduces the plugin api down to just 3 methods for adding
modules. Each returns a Collection<Module>. It also removes the
processModule method, which was unnecessary since onModule
implementations fullfill the same requirement. And finally, it renames
the modules() method to nodeModules() so it is clear these are created
once for each node.
The IndicesModule was made up of two submodules, one which
handled registering queries, and the other for registering
hunspell dictionaries. This change moves those into
IndicesModule. It also adds a new extension point type,
InstanceMap. This is simply a Map<K,V>, where K and V are
actual objects, not classes like most other extension points.
I also added a test method to help testing instance map extensions.
This was particularly painful because of how guice binds the key
and value as separate bindings, and then reconstitutes them
into a Map at injection time. In order to gain access to the
object which links the key and value, I had to tweak our
guice copy to not use an anonymous inner class for the Provider.
Note that I also renamed the existing extension point types, since
they were very redundant. For example, ExtensionPoint.MapExtensionPoint
is now ExtensionPoint.ClassMap.
See #12783.
This method has multiple modes of resolving config files by
first looking in the config directory, then on the classpath,
and finally by prefixing with "config/" on the classpath.
Most of the places taking advantage of this were tests, so they
did not have to setup a real home dir with config. The only place
that was really relying on it was the code which loads names.txt
to randomly choose a node name.
This change fixes test to setup fake home dirs with their config
files. It also makes the logic for finding names.txt explicit:
look in config dir, and if it doesn't exist, load /config/names.txt
from the classpath.
Most of the abstract base test classes we have were previously @Ignored.
However, there were also some other tests ignored. Having two ways to
quiet tests is confusing, and clearly it has caused some tests
to get lost in the fold.
This change moves all base test classes to use the "TestCase" suffix,
which is not picked up by the test class name pattern. It also removes
@Ignore from (almost) all tests, and adds it to forbidden apis.
And since we were renaming, I shorted base test class names to use
"ES" instead of "Elasticsearch". I type this a lot of types a day,
and I have heard others express a similar desire for a shorter name.
closes#10659
Closes#12367
Squashed commit of the following:
commit 9453c411798121aa5439c52e95301f60a022ba5f
Merge: 3511a9c 828d8c7
Author: Robert Muir <rmuir@apache.org>
Date: Wed Jul 22 08:22:41 2015 -0400
Merge branch 'master' into refactor_pluginservice
commit 3511a9c616503c447de9f0df9b4e9db3e22abd58
Author: Ryan Ernst <ryan@iernst.net>
Date: Tue Jul 21 21:50:15 2015 -0700
Remove duplicated constant
commit 4a9b5b4621b0ef2e74c1e017d9c8cf624dd27713
Author: Ryan Ernst <ryan@iernst.net>
Date: Tue Jul 21 21:01:57 2015 -0700
Add check that plugin must specify at least site or jvm
commit 19aef2f0596153a549ef4b7f4483694de41e101b
Author: Ryan Ernst <ryan@iernst.net>
Date: Tue Jul 21 20:52:58 2015 -0700
Change plugin "plugin" property to "classname"
commit 07ae396f30ed592b7499a086adca72d3f327fe4c
Author: Robert Muir <rmuir@apache.org>
Date: Tue Jul 21 23:36:05 2015 -0400
remove test with no methods
commit 550e73bf3d0f94562f4dde95239409dc5a24ce25
Author: Robert Muir <rmuir@apache.org>
Date: Tue Jul 21 23:31:58 2015 -0400
fix loading to use classname
commit 04463aed12046da0da5cac2a24c3ace51a79f799
Author: Robert Muir <rmuir@apache.org>
Date: Tue Jul 21 23:24:19 2015 -0400
rename to classname
commit 9f3afadd1caf89448c2eb913757036da48758b2d
Author: Ryan Ernst <ryan@iernst.net>
Date: Tue Jul 21 20:18:46 2015 -0700
moved PluginInfo and refactored parsing from properties file
commit df63ccc1b8b7cc64d3e59d23f6c8e827825eba87
Author: Robert Muir <rmuir@apache.org>
Date: Tue Jul 21 23:08:26 2015 -0400
fix test
commit c7febd844be358707823186a8c7a2d21e37540c9
Author: Robert Muir <rmuir@apache.org>
Date: Tue Jul 21 23:03:44 2015 -0400
remove test
commit 017b3410cf9d2b7fca1b8653e6f1ebe2f2519257
Author: Robert Muir <rmuir@apache.org>
Date: Tue Jul 21 22:58:31 2015 -0400
fix test
commit c9922938df48041ad43bbb3ed6746f71bc846629
Merge: ad59af4 01ea89a
Author: Robert Muir <rmuir@apache.org>
Date: Tue Jul 21 22:37:28 2015 -0400
Merge branch 'master' into refactor_pluginservice
commit ad59af465e1f1ac58897e63e0c25fcce641148a7
Author: Areek Zillur <areek.zillur@elasticsearch.com>
Date: Tue Jul 21 19:30:26 2015 -0400
[TEST] Verify expected number of nodes in cluster before issuing shardStores request
commit f0f5a1e087255215b93656550fbc6bd89b8b3205
Author: Lee Hinman <lee@writequit.org>
Date: Tue Jul 21 11:27:28 2015 -0600
Ignore EngineClosedException during translog fysnc
When performing an operation on a primary, the state is captured and the
operation is performed on the primary shard. The original request is
then modified to increment the version of the operation as preparation
for it to be sent to the replicas.
If the request first fails on the primary during the translog sync
(because the Engine is already closed due to shadow primaries closing
the engine on relocation), then the operation is retried on the new primary
after being modified for the replica shards. It will then fail due to the
version being incorrect (the document does not yet exist but the request
expects a version of "1").
Order of operations:
- Request is executed against primary
- Request is modified (version incremented) so it can be sent to replicas
- Engine's translog is fsync'd if necessary (failing, and throwing an exception)
- Modified request is retried against new primary
This change ignores the exception where the engine is already closed
when syncing the translog (similar to how we ignore exceptions when
refreshing the shard if the ?refresh=true flag is used).
commit 4ac68bb1658688550ced0c4f479dee6d8b617777
Author: Shay Banon <kimchy@gmail.com>
Date: Tue Jul 21 22:37:29 2015 +0200
Replica allocator unit tests
First batch of unit tests to verify the behavior of replica allocator
commit 94609fc5943c8d85adc751b553847ab4cebe58a3
Author: Jason Tedor <jason@tedor.me>
Date: Tue Jul 21 14:04:46 2015 -0400
Correctly list blobs in Azure storage to prevent snapshot corruption and do not unnecessarily duplicate Lucene segments in Azure Storage
This commit addresses an issue that was leading to snapshot corruption for snapshots stored as blobs in Azure Storage.
The underlying issue is that in cases when multiple snapshots of an index were taken and persisted into Azure Storage, snapshots subsequent
to the first would repeatedly overwrite the snapshot files. This issue does render useless all snapshots except the final snapshot.
The root cause of this is due to String concatenation involving null. In particular, to list all of the blobs in a snapshot directory in
Azure the code would use the method listBlobsByPrefix where the prefix is null. In the listBlobsByPrefix method, the path keyPath + prefix
is constructed. However, per 5.1.11, 5.4 and 15.18.1 of the Java Language Specification, the reference null is first converted to the string
"null" before performing the concatenation. This leads to no blobs being returned and therefore the snapshot mechanism would operate as if
it were writing the first snapshot of the index. The fix is simply to check if prefix is null and handle the concatenation accordingly.
Upon fixing this issue so that subsequent snapshots would no longer overwrite earlier snapshots, it was discovered that the snapshot metadata
returned by the listBlobsByPrefix method was not sufficient for the snapshot layer to detect whether or not the Lucene segments had already
been copied to the Azure storage layer in an earlier snapshot. This led the snapshot layer to unnecessarily duplicate these Lucene segments
in Azure Storage.
The root cause of this is due to known behavior in the CloudBlobContainer.getBlockBlobReference method in the Azure API. Namely, this method
does not fetch blob attributes from Azure. As such, the lengths of all the blobs appeared to the snapshot layer to be of length zero and
therefore they would compare as not equal to any new blobs that the snapshot layer is going to persist. To remediate this, the method
CloudBlockBlob.downloadAttributes must be invoked. This will fetch the attributes from Azure Storage so that a proper comparison of the
blobs can be performed.
Closeselastic/elasticsearch-cloud-azure#51, closeselastic/elasticsearch-cloud-azure#99
commit cf1d481ce5dda0a45805e42f3b2e0e1e5d028b9e
Author: Lee Hinman <lee@writequit.org>
Date: Mon Jul 20 08:41:55 2015 -0600
Unit tests for `nodesAndVersions` on shared filesystems
With the `recover_on_any_node` setting, these unit tests check that the
correct node list and versions are returned.
commit 3c27cc32395c3624f7c794904d9ea4faf2eccbfb
Author: Robert Muir <rmuir@apache.org>
Date: Tue Jul 21 14:15:59 2015 -0400
don't fail junit4 integration tests if there are no tests.
instead fail the failsafe plugin, which means the external cluster will still get shut down
commit 95d2756c5a8c21a157fa844273fc83dfa3c00aea
Author: Alexander Reelsen <alexander@reelsen.net>
Date: Tue Jul 21 17:16:53 2015 +0200
Testing: Fix help displaying tests under windows
The help files are using a unix based file separator, where as
the test relies on the help being based on the file system separator.
This commit fixes the test to remove all `\r` characters before
comparing strings.
The test has also been moved into its own CliToolTestCase, as it does
not need to be an integration test.
commit 944f06ea36bd836f007f8eaade8f571d6140aad9
Author: Clinton Gormley <clint@traveljury.com>
Date: Tue Jul 21 18:04:52 2015 +0200
Refactored check_license_and_sha.pl to accept a license dir and package path
In preparation for the move to building the core zip, tar.gz, rpm, and deb as separate modules, refactored check_license_and_sha.pl to:
* accept a license dir and path to the package to check on the command line
* to be able to extract zip, tar.gz, deb, and rpm
* all packages except rpm will work on Windows
commit 2585431e8dfa5c82a2cc5b304cd03eee9bed7a4c
Author: Chris Earle <pickypg@users.noreply.github.com>
Date: Tue Jul 21 08:35:28 2015 -0700
Updating breaking changes
- field names cannot be mapped with `.` in them
- fixed asciidoc issue where the list was not recognized as a list
commit de299b9d3f4615b12e2226a1e2eff5a38ecaf15f
Author: Shay Banon <kimchy@gmail.com>
Date: Tue Jul 21 13:27:52 2015 +0200
Replace primaryPostAllocated flag and use UnassignedInfo
There is no need to maintain additional state as to if a primary was allocated post api creation on the index routing table, we hold all this information already in the UnassignedInfo class.
closes#12374
commit 43080bff40f60bedce5bdbc92df302f73aeb9cae
Author: Alexander Reelsen <alexander@reelsen.net>
Date: Tue Jul 21 15:45:05 2015 +0200
PluginManager: Fix bin/plugin calls in scripts/bats test
The release and smoke test python scripts used to install
plugins in the old fashion.
Also the BATS testing suite installed/removed plugins in that
way. Here the marvel tests have been removed, as marvel currently
does not work with the master branch.
In addition documentation has been updated as well, where it was
still missing.
commit b81ccba48993bc13c7678e6d979fd96998499233
Author: Boaz Leskes <b.leskes@gmail.com>
Date: Tue Jul 21 11:37:50 2015 +0200
Discovery: make sure NodeJoinController.ElectionCallback is always called from the update cluster state thread
This is important for correct handling of the joining thread. This causes assertions to trip in our test runs. See http://build-us-00.elastic.co/job/es_g1gc_master_metal/11653/ as an example
Closes#12372
commit 331853790bf29e34fb248ebc4c1ba585b44f5cab
Author: Boaz Leskes <b.leskes@gmail.com>
Date: Tue Jul 21 15:54:36 2015 +0200
Remove left over no commit from TransportReplicationAction
It asks to double check thread pool rejection. I did and don't see problems with it.
commit e5724931bbc1603e37faa977af4235507f4811f5
Author: Alexander Reelsen <alexander@reelsen.net>
Date: Tue Jul 21 15:31:57 2015 +0200
CliTool: Various PluginManager fixes
The new plugin manager parser was not called correctly in the scripts.
In addition the plugin manager now creates a plugins/ directory in case
it does not exist.
Also the integration tests called the plugin manager in the deprecated way.
commit 7a815a370f83ff12ffb12717ac2fe62571311279
Author: Alexander Reelsen <alexander@reelsen.net>
Date: Tue Jul 21 13:54:18 2015 +0200
CLITool: Port PluginManager to use CLITool
In order to unify the handling and reuse the CLITool infrastructure
the plugin manager should make use of this as well.
This obsolets the -i and --install options but requires the user
to use `install` as the first argument of the CLI.
This is basically just a port of the existing functionality, which
is also the reason why this is not a refactoring of the plugin manager,
which will come in a separate commit.
commit 7f171eba7b71ac5682a355684b6da703ffbfccc7
Author: Martijn van Groningen <martijn.v.groningen@gmail.com>
Date: Tue Jul 21 10:44:21 2015 +0200
Remove custom execute local logic in TransportSingleShardAction and TransportInstanceSingleOperationAction and rely on transport service to execute locally. (forking thread etc.)
Change TransportInstanceSingleOperationAction to have shardActionHandler to, so we can execute locally without endless spinning.
commit 0f38e3eca6b570f74b552e70b4673f47934442e1
Author: Ryan Ernst <ryan@iernst.net>
Date: Tue Jul 21 17:36:12 2015 -0700
More readMetadata tests and pickiness
commit 880b47281bd69bd37807e8252934321b089c9f8e
Author: Ryan Ernst <ryan@iernst.net>
Date: Tue Jul 21 14:42:09 2015 -0700
Started unit tests for plugin service
commit cd7c8ddd7b8c4f3457824b493bffb19c156c7899
Author: Robert Muir <rmuir@apache.org>
Date: Tue Jul 21 07:21:07 2015 -0400
fix tests
commit 673454f0b14f072f66ed70e32110fae4f7aad642
Author: Robert Muir <rmuir@apache.org>
Date: Tue Jul 21 06:58:25 2015 -0400
refactor pluginservice
We can keep only unit tests in plugins instead of starting each time a local node and running tests against it.
Also follow up of #12091
Tests can use more than one JVM
We don't need anymore to set the number of jvm to run tests as we moved IT to Rest Tests
For all plugins but cloud plugins which will require another way for running integration tests.
Follow up for https://github.com/elastic/elasticsearch-analysis-kuromoji/issues/61
We don't shade anymore elasticsearch dependencies, so plugins might include jars in the distribution ZIP file which might not be needed anymore.
For example, `elasticsearch-cloud-aws` comes with:
```
Archive: cloud-aws/target/releases/elasticsearch-cloud-aws-2.0.0-SNAPSHOT.zip
Length Date Time Name
-------- ---- ---- ----
1920788 05-18-15 09:42 aws-java-sdk-ec2-1.9.34.jar
503963 05-18-15 09:42 aws-java-sdk-core-1.9.34.jar
232771 01-19-15 09:24 commons-codec-1.6.jar
915096 01-19-15 09:24 jackson-databind-2.3.2.jar
252288 05-18-15 09:42 aws-java-sdk-kms-1.9.34.jar
62050 01-19-15 09:24 commons-logging-1.1.3.jar
282269 10-31-14 13:19 httpcore-4.3.2.jar
35058 01-19-15 09:24 jackson-annotations-2.3.0.jar
229998 05-29-15 12:28 jackson-core-2.5.3.jar
589289 01-19-15 09:24 joda-time-2.7.jar
562858 05-18-15 09:42 aws-java-sdk-s3-1.9.34.jar
590533 10-31-14 13:19 httpclient-4.3.5.jar
44854 06-12-15 19:22 elasticsearch-cloud-aws-2.0.0-SNAPSHOT.jar
-------- -------
6221815 13 files
```
A lot of those files are already distributed with elasticsearch itself so classes are available within the classloader.
We mark all es core dependencies as provided in plugins.
We also remove `groupId` as already defined in parent pom.
And we remove non needed licenses files as some jars are not included anymore in plugins.
Closes#11647.
Daniel Mitterdorfer
Nik Everett
Ryan Ernst
Jun Ohtani
Tanguy Leroux
Simon Willnauer
Mike McCandless
Ali Beyad
Jason Tedor
Adrien Grand
Xu Zhang
Simon Willnauer
Robert Muir
Boaz Leskes
Daniel Mitterdorfer
David Pilato