We believe there's no longer a need to be able to disable basic-license
features completely using the "xpack.*.enabled" settings. If users don't
want to use those features, they simply don't need to use them. Having
such features always available lets us build more complex features that
assume basic-license features are present.
This commit deprecates settings of the form "xpack.*.enabled" for
basic-license features, excluding "security", which is a special case.
It also removes deprecated settings from integration tests and unit
tests where they're not directly relevant; e.g. monitoring and ILM are
no longer disabled in many integration tests.
We suspect the flakiness could’ve come from the fact that the rollover
step used to create the new index and roll the write alias to the new
index in separate cluster state updates. So the assertion that the
rolled index exists could’ve passed in the test but, before the
alias was rolled over to the new index, the subsequent write we execute
in the test (namely
`indexDocs("test_user", "x-pack-test-password", "foo_alias", 1)`)
would’ve sent the new document to the source index (ie. foo-logs-000001)
This would see the source index containing 3 documents and the rolled
index (foo-logs-000002) 0 documents.
However, we fixed this and the rollover step executes the “create index
and roll alias” in one single cluster update, so this situation should
not occur anymore.
(cherry picked from commit 834261c4fe7dd93f437eeec43c00d01ff2279f86)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
Backport of #45794 to 7.x. Convert most `awaitBusy` calls to
`assertBusy`, and use asserts where possible. Follows on from #28548 by
@liketic.
There were a small number of places where it didn't make sense to me to
call `assertBusy`, so I kept the existing calls but renamed the method to
`waitUntil`. This was partly to better reflect its usage, and partly so
that anyone trying to add a new call to awaitBusy wouldn't be able to find
it.
I also didn't change the usage in `TransportStopRollupAction` as the
comments state that the local awaitBusy method is a temporary
copy-and-paste.
Other changes:
* Rework `waitForDocs` to scale its timeout. Instead of calling
`assertBusy` in a loop, work out a reasonable overall timeout and await
just once.
* Some tests failed after switching to `assertBusy` and had to be fixed.
* Correct the expect templates in AbstractUpgradeTestCase. The ES
Security team confirmed that they don't use templates any more, so
remove this from the expected templates. Also rewrite how the setup
code checks for templates, in order to give more information.
* Remove an expected ML template from XPackRestTestConstants The ML team
advised that the ML tests shouldn't be waiting for any
`.ml-notifications*` templates, since such checks should happen in the
production code instead.
* Also rework the template checking code in `XPackRestTestHelper` to give
more helpful failure messages.
* Fix issue in `DataFrameSurvivesUpgradeIT` when upgrading from < 7.4
* Add retention to Snapshot Lifecycle Management (#46407)
This commit adds retention to the existing Snapshot Lifecycle Management feature (#38461) as described in #43663. This allows a user to configure SLM to automatically delete older snapshots based on a number of criteria.
An example policy would look like:
```
PUT /_slm/policy/snapshot-every-day
{
"schedule": "0 30 2 * * ?",
"name": "<production-snap-{now/d}>",
"repository": "my-s3-repository",
"config": {
"indices": ["foo-*", "important"]
},
// Newly configured retention options
"retention": {
// Snapshots should be deleted after 14 days
"expire_after": "14d",
// Keep a maximum of thirty snapshots
"max_count": 30,
// Keep a minimum of the four most recent snapshots
"min_count": 4
}
}
```
SLM Retention is run on a scheduled configurable with the `slm.retention_schedule` setting, which supports cron expressions. Deletions are run for a configurable time bounded by the `slm.retention_duration` setting, which defaults to 1 hour.
Included in this work is a new SLM stats API endpoint available through
``` json
GET /_slm/stats
```
That returns statistics about snapshot taken and deleted, as well as successful retention runs, failures, and the time spent deleting snapshots. #45362 has more information as well as an example of the output. These stats are also included when retrieving SLM policies via the API.
* Add base framework for snapshot retention (#43605)
* Add base framework for snapshot retention
This adds a basic `SnapshotRetentionService` and `SnapshotRetentionTask`
to start as the basis for SLM's retention implementation.
Relates to #38461
* Remove extraneous 'public'
* Use a local var instead of reading class var repeatedly
* Add SnapshotRetentionConfiguration for retention configuration (#43777)
* Add SnapshotRetentionConfiguration for retention configuration
This commit adds the `SnapshotRetentionConfiguration` class and its HLRC
counterpart to encapsulate the configuration for SLM retention.
Currently only a single parameter is supported as an example (we still
need to discuss the different options we want to support and their
names) to keep the size of the PR down. It also does not yet include version serialization checks
since the original SLM branch has not yet been merged.
Relates to #43663
* Fix REST tests
* Fix more documentation
* Use Objects.equals to avoid NPE
* Put `randomSnapshotLifecyclePolicy` in only one place
* Occasionally return retention with no configuration
* Implement SnapshotRetentionTask's snapshot filtering and delet… (#44764)
* Implement SnapshotRetentionTask's snapshot filtering and deletion
This commit implements the snapshot filtering and deletion for
`SnapshotRetentionTask`. Currently only the expire-after age is used for
determining whether a snapshot is eligible for deletion.
Relates to #43663
* Fix deletes running on the wrong thread
* Handle missing or null policy in snap metadata differently
* Convert Tuple<String, List<SnapshotInfo>> to Map<String, List<SnapshotInfo>>
* Use the `OriginSettingClient` to work with security, enhance logging
* Prevent NPE in test by mocking Client
* Allow empty/missing SLM retention configuration (#45018)
Semi-related to #44465, this allows the `"retention"` configuration map
to be missing.
Relates to #43663
* Add min_count and max_count as SLM retention predicates (#44926)
This adds the configuration options for `min_count` and `max_count` as
well as the logic for determining whether a snapshot meets this criteria
to SLM's retention feature.
These options are optional and one, two, or all three can be specified
in an SLM policy.
Relates to #43663
* Time-bound deletion of snapshots in retention delete function (#45065)
* Time-bound deletion of snapshots in retention delete function
With a cluster that has a large number of snapshots, it's possible that
snapshot deletion can take a very long time (especially since deletes
currently have to happen in a serial fashion). To prevent snapshot
deletion from taking forever in a cluster and blocking other operations,
this commit adds a setting to allow configuring a maximum time to spend
deletion snapshots during retention. This dynamic setting defaults to 1
hour and is best-effort, meaning that it doesn't hard stop a deletion
at an hour mark, but ensures that once the time has passed, all
subsequent deletions are deferred until the next retention cycle.
Relates to #43663
* Wow snapshots suuuure can take a long time.
* Use a LongSupplier instead of actually sleeping
* Remove TestLogging annotation
* Remove rate limiting
* Add SLM metrics gathering and endpoint (#45362)
* Add SLM metrics gathering and endpoint
This commit adds the infrastructure to gather metrics about the different SLM actions that a cluster
takes. These actions are stored in `SnapshotLifecycleStats` and perpetuated in cluster state. The
stats stored include the number of snapshots taken, failed, deleted, the number of retention runs,
as well as per-policy counts for snapshots taken, failed, and deleted. It also includes the amount
of time spent deleting snapshots from SLM retention.
This commit also adds an endpoint for retrieving all stats (further commits will expose this in the
SLM get-policy API) that looks like:
```
GET /_slm/stats
{
"retention_runs" : 13,
"retention_failed" : 0,
"retention_timed_out" : 0,
"retention_deletion_time" : "1.4s",
"retention_deletion_time_millis" : 1404,
"policy_metrics" : {
"daily-snapshots2" : {
"snapshots_taken" : 7,
"snapshots_failed" : 0,
"snapshots_deleted" : 6,
"snapshot_deletion_failures" : 0
},
"daily-snapshots" : {
"snapshots_taken" : 12,
"snapshots_failed" : 0,
"snapshots_deleted" : 12,
"snapshot_deletion_failures" : 6
}
},
"total_snapshots_taken" : 19,
"total_snapshots_failed" : 0,
"total_snapshots_deleted" : 18,
"total_snapshot_deletion_failures" : 6
}
```
This does not yet include HLRC for this, as this commit is quite large on its own. That will be
added in a subsequent commit.
Relates to #43663
* Version qualify serialization
* Initialize counters outside constructor
* Use computeIfAbsent instead of being too verbose
* Move part of XContent generation into subclass
* Fix REST action for master merge
* Unused import
* Record history of SLM retention actions (#45513)
This commit records the deletion of snapshots by the retention component
of SLM into the SLM history index for the purposes of reviewing operations
taken by SLM and alerting.
* Retry SLM retention after currently running snapshot completes (#45802)
* Retry SLM retention after currently running snapshot completes
This commit adds a ClusterStateObserver to wait until the currently
running snapshot is complete before proceeding with snapshot deletion.
SLM retention waits for the maximum allowed deletion time for the
snapshot to complete, however, the waiting time is not factored into
the limit on actual deletions.
Relates to #43663
* Increase timeout waiting for snapshot completion
* Apply patch
From 2374316f0d.patch
* Rename test variables
* [TEST] Be less strict for stats checking
* Skip SLM retention if ILM is STOPPING or STOPPED (#45869)
This adds a check to ensure we take no action during SLM retention if
ILM is currently stopped or in the process of stopping.
Relates to #43663
* Check all actions preventing snapshot delete during retention (#45992)
* Check all actions preventing snapshot delete during retention run
Previously we only checked to see if a snapshot was currently running,
but it turns out that more things can block snapshot deletion. This
changes the check to be a check for:
- a snapshot currently running
- a deletion already in progress
- a repo cleanup in progress
- a restore currently running
This was found by CI where a third party delete in a test caused SLM
retention deletion to throw an exception.
Relates to #43663
* Add unit test for okayToDeleteSnapshots
* Fix bug where SLM retention task would be scheduled on every node
* Enhance test logging
* Ignore if snapshot is already deleted
* Missing import
* Fix SnapshotRetentionServiceTests
* Expose SLM policy stats in get SLM policy API (#45989)
This also adds support for the SLM stats endpoint to the high level rest client.
Retrieving a policy now looks like:
```json
{
"daily-snapshots" : {
"version": 1,
"modified_date": "2019-04-23T01:30:00.000Z",
"modified_date_millis": 1556048137314,
"policy" : {
"schedule": "0 30 1 * * ?",
"name": "<daily-snap-{now/d}>",
"repository": "my_repository",
"config": {
"indices": ["data-*", "important"],
"ignore_unavailable": false,
"include_global_state": false
},
"retention": {}
},
"stats": {
"snapshots_taken": 0,
"snapshots_failed": 0,
"snapshots_deleted": 0,
"snapshot_deletion_failures": 0
},
"next_execution": "2019-04-24T01:30:00.000Z",
"next_execution_millis": 1556048160000
}
}
```
Relates to #43663
* Rewrite SnapshotLifecycleIT as as ESIntegTestCase (#46356)
* Rewrite SnapshotLifecycleIT as as ESIntegTestCase
This commit splits `SnapshotLifecycleIT` into two different tests.
`SnapshotLifecycleRestIT` which includes the tests that do not require
slow repositories, and `SLMSnapshotBlockingIntegTests` which is now an
integration test using `MockRepository` to simulate a snapshot being in
progress.
Relates to #43663Resolves#46205
* Add error logging when exceptions are thrown
* Update serialization versions
* Fix type inference
* Use non-Cancellable HLRC return value
* Fix Client mocking in test
* Fix SLMSnapshotBlockingIntegTests for 7.x branch
* Update SnapshotRetentionTask for non-multi-repo snapshot retrieval
* Add serialization guards for SnapshotLifecyclePolicy
* Rename indexlifecycle to ilm and snapshotlifecycle to slm (#44917)
As a followup to #44725 and #44608, which renamed the packages within
the x-pack project, this renames the packages within the core x-pack
project. It also renames 'snapshotlifecycle' within the HLRC to slm.
* Fix one more import
Today we have an annotation for controlling logging levels in
tests. This annotation serves two purposes, one is to control the
logging level used in tests, when such control is needed to impact and
assert the behavior of loggers in tests. The other use is when a test is
failing and additional logging is needed. This commit separates these
two concerns into separate annotations.
The primary motivation for this is that we have a history of leaving
behind the annotation for the purpose of investigating test failures
long after the test failure is resolved. The accumulation of these stale
logging annotations has led to excessive disk consumption. Having
recently cleaned this up, we would like to avoid falling into this state
again. To do this, we are adding a link to the test failure under
investigation to the annotation when used for the purpose of
investigating test failures. We will add tooling to inspect these
annotations, in the same way that we have tooling on awaits fix
annotations. This will enable us to report on the use of these
annotations, and report when stale uses of the annotation exist.
* Add Snapshot Lifecycle Management (#43934)
* Add SnapshotLifecycleService and related CRUD APIs
This commit adds `SnapshotLifecycleService` as a new service under the ilm
plugin. This service handles snapshot lifecycle policies by scheduling based on
the policies defined schedule.
This also includes the get, put, and delete APIs for these policies
Relates to #38461
* Make scheduledJobIds return an immutable set
* Use Object.equals for SnapshotLifecyclePolicy
* Remove unneeded TODO
* Implement ToXContentFragment on SnapshotLifecyclePolicyItem
* Copy contents of the scheduledJobIds
* Handle snapshot lifecycle policy updates and deletions (#40062)
(Note this is a PR against the `snapshot-lifecycle-management` feature branch)
This adds logic to `SnapshotLifecycleService` to handle updates and deletes for
snapshot policies. Policies with incremented versions have the old policy
cancelled and the new one scheduled. Deleted policies have their schedules
cancelled when they are no longer present in the cluster state metadata.
Relates to #38461
* Take a snapshot for the policy when the SLM policy is triggered (#40383)
(This is a PR for the `snapshot-lifecycle-management` branch)
This commit fills in `SnapshotLifecycleTask` to actually perform the
snapshotting when the policy is triggered. Currently there is no handling of the
results (other than logging) as that will be added in subsequent work.
This also adds unit tests and an integration test that schedules a policy and
ensures that a snapshot is correctly taken.
Relates to #38461
* Record most recent snapshot policy success/failure (#40619)
Keeping a record of the results of the successes and failures will aid
troubleshooting of policies and make users more confident that their
snapshots are being taken as expected.
This is the first step toward writing history in a more permanent
fashion.
* Validate snapshot lifecycle policies (#40654)
(This is a PR against the `snapshot-lifecycle-management` branch)
With the commit, we now validate the content of snapshot lifecycle policies when
the policy is being created or updated. This checks for the validity of the id,
name, schedule, and repository. Additionally, cluster state is checked to ensure
that the repository exists prior to the lifecycle being added to the cluster
state.
Part of #38461
* Hook SLM into ILM's start and stop APIs (#40871)
(This pull request is for the `snapshot-lifecycle-management` branch)
This change allows the existing `/_ilm/stop` and `/_ilm/start` APIs to also
manage snapshot lifecycle scheduling. When ILM is stopped all scheduled jobs are
cancelled.
Relates to #38461
* Add tests for SnapshotLifecyclePolicyItem (#40912)
Adds serialization tests for SnapshotLifecyclePolicyItem.
* Fix improper import in build.gradle after master merge
* Add human readable version of modified date for snapshot lifecycle policy (#41035)
* Add human readable version of modified date for snapshot lifecycle policy
This small change changes it from:
```
...
"modified_date": 1554843903242,
...
```
To
```
...
"modified_date" : "2019-04-09T21:05:03.242Z",
"modified_date_millis" : 1554843903242,
...
```
Including the `"modified_date"` field when the `?human` field is used.
Relates to #38461
* Fix test
* Add API to execute SLM policy on demand (#41038)
This commit adds the ability to perform a snapshot on demand for a policy. This
can be useful to take a snapshot immediately prior to performing some sort of
maintenance.
```json
PUT /_ilm/snapshot/<policy>/_execute
```
And it returns the response with the generated snapshot name:
```json
{
"snapshot_name" : "production-snap-2019.04.09-rfyv3j9qreixkdbnfuw0ug"
}
```
Note that this does not allow waiting for the snapshot, and the snapshot could
still fail. It *does* record this information into the cluster state similar to
a regularly trigged SLM job.
Relates to #38461
* Add next_execution to SLM policy metadata (#41221)
* Add next_execution to SLM policy metadata
This adds the next time a snapshot lifecycle policy will be executed when
retriving a policy's metadata, for example:
```json
GET /_ilm/snapshot?human
{
"production" : {
"version" : 1,
"modified_date" : "2019-04-15T21:16:21.865Z",
"modified_date_millis" : 1555362981865,
"policy" : {
"name" : "<production-snap-{now/d}>",
"schedule" : "*/30 * * * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"foo-*",
"important"
],
"ignore_unavailable" : true,
"include_global_state" : false
}
},
"next_execution" : "2019-04-15T21:16:30.000Z",
"next_execution_millis" : 1555362990000
},
"other" : {
"version" : 1,
"modified_date" : "2019-04-15T21:12:19.959Z",
"modified_date_millis" : 1555362739959,
"policy" : {
"name" : "<other-snap-{now/d}>",
"schedule" : "0 30 2 * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"other"
],
"ignore_unavailable" : false,
"include_global_state" : true
}
},
"next_execution" : "2019-04-16T02:30:00.000Z",
"next_execution_millis" : 1555381800000
}
}
```
Relates to #38461
* Fix and enhance tests
* Figured out how to Cron
* Change SLM endpoint from /_ilm/* to /_slm/* (#41320)
This commit changes the endpoint for snapshot lifecycle management from:
```
GET /_ilm/snapshot/<policy>
```
to:
```
GET /_slm/policy/<policy>
```
It mimics the ILM path only using `slm` instead of `ilm`.
Relates to #38461
* Add initial documentation for SLM (#41510)
* Add initial documentation for SLM
This adds the initial documentation for snapshot lifecycle management.
It also includes the REST spec API json files since they're sort of
documentation.
Relates to #38461
* Add `manage_slm` and `read_slm` roles (#41607)
* Add `manage_slm` and `read_slm` roles
This adds two more built in roles -
`manage_slm` which has permission to perform any of the SLM actions, as well as
stopping, starting, and retrieving the operation status of ILM.
`read_slm` which has permission to retrieve snapshot lifecycle policies as well
as retrieving the operation status of ILM.
Relates to #38461
* Add execute to the test
* Fix ilm -> slm typo in test
* Record SLM history into an index (#41707)
It is useful to have a record of the actions that Snapshot Lifecycle
Management takes, especially for the purposes of alerting when a
snapshot fails or has not been taken successfully for a certain amount of
time.
This adds the infrastructure to record SLM actions into an index that
can be queried at leisure, along with a lifecycle policy so that this
history does not grow without bound.
Additionally,
SLM automatically setting up an index + lifecycle policy leads to
`index_lifecycle` custom metadata in the cluster state, which some of
the ML tests don't know how to deal with due to setting up custom
`NamedXContentRegistry`s. Watcher would cause the same problem, but it
is already disabled (for the same reason).
* High Level Rest Client support for SLM (#41767)
* High Level Rest Client support for SLM
This commit add HLRC support for SLM.
Relates to #38461
* Fill out documentation tests with tags
* Add more callouts and asciidoc for HLRC
* Update javadoc links to real locations
* Add security test testing SLM cluster privileges (#42678)
* Add security test testing SLM cluster privileges
This adds a test to `PermissionsIT` that uses the `manage_slm` and `read_slm`
cluster privileges.
Relates to #38461
* Don't redefine vars
* Add Getting Started Guide for SLM (#42878)
This commit adds a basic Getting Started Guide for SLM.
* Include SLM policy name in Snapshot metadata (#43132)
Keep track of which SLM policy in the metadata field of the Snapshots
taken by SLM. This allows users to more easily understand where the
snapshot came from, and will enable future SLM features such as
retention policies.
* Fix compilation after master merge
* [TEST] Move exception wrapping for devious exception throwing
Fixes an issue where an exception was created from one line and thrown in another.
* Fix SLM for the change to AcknowledgedResponse
* Add Snapshot Lifecycle Management Package Docs (#43535)
* Fix compilation for transport actions now that task is required
* Add a note mentioning the privileges needed for SLM (#43708)
* Add a note mentioning the privileges needed for SLM
This adds a note to the top of the "getting started with SLM"
documentation mentioning that there are two built-in privileges to
assist with creating roles for SLM users and administrators.
Relates to #38461
* Mention that you can create snapshots for indices you can't read
* Fix REST tests for new number of cluster privileges
* Mute testThatNonExistingTemplatesAreAddedImmediately (#43951)
* Fix SnapshotHistoryStoreTests after merge
* Remove overridden newResponse functions that have been removed
* Fix compilation for backport
* Fix get snapshot output parsing in test
* [DOCS] Add redirects for removed autogen anchors (#44380)
* Switch <tt>...</tt> in javadocs for {@code ...}
Test clusters currently has its own set of logic for dealing with
finding different versions of Elasticsearch, downloading them, and
extracting them. This commit converts testclusters to use the
DistributionDownloadPlugin.
When the same alias points to multiple indices we can write to only one index
with `is_write_index` value `true`. The special handling in case of the put
mapping request(to resolve authorized indices) has a check on indices size
for a concrete index. If multiple indices existed then it marked the request
as unauthorized.
The check has been modified to consider write index flag and only when the
requested index matches with the one with write index alias, the alias is considered
for authorization.
Closes#40831
Adds a Step to the Shrink and Delete actions which prevents those
actions from running on a leader index - all follower indices must first
unfollow the leader index before these actions can run. This prevents
the loss of history before follower indices are ready, which might
otherwise result in the loss of data.
* add read_ilm cluster privilege
Although managing ILM policies is best done using the
"manage" cluster privilege, it is useful to have read-only
views.
* adds `read_ilm` cluster privilege for viewing policies and status
* adds Explain API to the `view_index_metadata` index privilege
* add manage_ilm privileges
This commit does a few things
- moves ILM-specifc rest yaml tests into plugin/ilm/qa, and creates special
:plugin:ilm:qa:rest module to test them
- removes the with-security tests of the yaml tests since they are covered in
the rest tests now
- moves ChangePolicyforIndexIT into the qa/multi-node project since that test is
not currently running in main ilm since integTest is disabled
This PR renames the CRUD APIS for ILM
GET _ilm/<policy>, _ilm -> _ilm/policy/<policy>, _ilm/policy
PUT _ilm/<policy> -> _ilm/policy/<policy>
DELETE _ilm/<policy> -> _ilm/policy/<policy>
closes#34929.
ILM now only forces indices to become read only in the case of Shrink
and Force Merge actions, as these are most useful in cases where the
index is no longer being written to.
The qa tests with security haven't actually gone as far as testing security roles yet, so this is a start in the hopes of both bringing the tests into the ilm plugin
William Brafford
Andrei Dan
Rory Hunter
Lee Hinman
Jason Tedor
Ryan Ernst
Alpar Torok
Daniel Mitterdorfer
Christoph Büscher
Yogesh Gaikwad
Gordon Brown
Tal Levy