This commit implements a straightforward approach to retention lease
expiration. Namely, we inspect which leases are expired when obtaining
the current leases through the replication tracker. At that moment, we
clean the map that persists the retention leases in memory.
The `cluster.unsafe_initial_master_node_count` setting was introduced as a
temporary measure while the design of `cluster.initial_master_nodes` was being
finalised. This commit removes this temporary setting, replacing it with usages
of `cluster.initial_master_nodes` where appropriate.
This commit adds a unique id to cluster blocks, so that they can be uniquely
identified if needed. This is important for the Close Index API where multiple
concurrent closing requests can be executed at the same time. By adding a
UUID to the cluster block, we can generate unique "closing block" that can
later be verified on shards and then checked again from the cluster state
before closing the index. When the verification on shard is done, the closing
block is replaced by the regular INDEX_CLOSED_BLOCK instance.
If something goes wrong, calling the Open Index API will remove the block.
Related to #33888
This commit is the first in a series which will culminate with
fully-functional shard history retention leases.
Shard history retention leases are aimed at preventing shard history
consumers from having to fallback to expensive file copy operations if
shard history is not available from a certain point. These consumers
include following indices in cross-cluster replication, and local shard
recoveries. A future consumer will be the changes API.
Further, index lifecycle management requires coordinating with some of
these consumers otherwise it could remove the source before all
consumers have finished reading all operations. The notion of shard
history retention leases that we are introducing here will also be used
to address this problem.
Shard history retention leases are a property of the replication group
managed under the authority of the primary. A shard history retention
lease is a combination of an identifier, a retaining sequence number, a
timestamp indicating when the lease was acquired or renewed, and a
string indicating the source of the lease. Being leases they have a
limited lifespan that will expire if not renewed. The idea of these
leases is that all operations above the minimum of all retaining
sequence numbers will be retained during merges (which would otherwise
clear away operations that are soft deleted). These leases will be
periodically persisted to Lucene and restored during recovery, and
broadcast to replicas under certain circumstances.
This commit is merely putting the basics in place. This first commit
only introduces the concept and integrates their use with the soft
delete retention policy. We add some tests to demonstrate the basic
management is correct, and that the soft delete policy is correctly
influenced by the existence of any retention leases. We make no effort
in this commit to implement any of the following:
- timestamps
- expiration
- persistence to and recovery from Lucene
- handoff during primary relocation
- sharing retention leases with replicas
- exposing leases in shard-level statistics
- integration with cross-cluster replication
These will occur individually in follow-up commits.
The initialization of a suite scope cluster had some sideffects on
subsequent runs which causes issues when tests must be reproduced.
This moves the suite scope initialization to a privte random context.
Closes#36202
In Lucene 8 searches can skip non-competitive hits if the total hit count is not requested.
It is also possible to track the number of hits up to a certain threshold. This is a trade off to speed up searches while still being able to know a lower bound of the total hit count. This change adds the ability to set this threshold directly in the track_total_hits search option. A boolean value (true, false) indicates whether the total hit count should be tracked in the response. When set as an integer this option allows to compute a lower bound of the total hits while preserving the ability to skip non-competitive hits when enough matches have been collected.
Relates #33028
Now that we unwrap mappings in DocumentMapperParser#extractMappings, it is not
necessary for the mapping definition to always be nested under the type. This
leniency around the mapping format was added in 2341825358.
With the upcoming cross-cluster search alternate execution mode, the CCS
node will be able to split a CCS request into multiple search requests,
one per remote cluster involved. In order to do that, the CCS node has
to be able to signal to each remote cluster that such sub-requests are
part of a CCS request. Each cluster does not know about the other
clusters involved, and does not know either what alias it is given in
the CCS node, hence the CCS coordinating node needs to be able to provide
the alias as part of the search request so that it is used as index prefix
in the returned search hits.
The cluster alias is a notion that's already supported in the search shards
iterator and search shard target, but it is currently used in CCS as both
index prefix and connection lookup key when fanning out to all the shards.
With CCS alternate execution mode the provided cluster alias needs to be
used only as index prefix, as shards are local to each cluster hence no
cluster alias should be used for connection lookups.
The local cluster alias can be set to the SearchRequest at the transport layer
only, and its constructor/getter methods are package private.
Relates to #32125
Today InternalTestClusterTests is still using zen1.
This commit fixes it.
Two types of changes were required:
1. Explicitly pass file discovery host provider setting. It's done in
ESIntegTestCase as a part of the Zen2 feature and should be done here
as well.
2. For the test, that uses autoManageMinMasterNodes = false perform
cluster bootstrap.
Today the routing of a SourceToParse is assigned in a separate step
after the object is created. We can easily forget to set the routing.
With this commit, the routing must be provided in the constructor of
SourceToParse.
Relates #36921
This is a follow-up to some discussions around #36399. Currently we have
relatively confusing compression behavior where compression can be
configured for requests based on transport.compress or a specific
setting for a remote cluster. However, we can only compress responses
based on transport.compress as we do not know where a request is
coming from (currently).
This commit modifies the behavior to NEVER compress responses based on
settings. Instead, a response will only be compressed if the request was
compressed. This commit also updates the documentation to more clearly
described transport level compression.
This commit modifies ESSingleNodeTestCase and ESIntegTestCase and
several concrete test classes to use node names when bootstrapping the
cluster.
Today ClusterBootstrapService.INITIAL_MASTER_NODE_COUNT_SETTING
setting is used to bootstrap clusters in tests. Instead, we want to use
ClusterBootrstapService.INITIAL_MASTER_NODES_SETTING and get rid of
the former setting eventually.
There were two main problems when refactoring InternalTestCluster:
1. Nodes are created one-by-one in buildNode method. And node.name
is created in this method as well. It's not suitable for bootstrapping,
because we need to have the names of all master eligible nodes in
advance, before creating the node with bootstrapping configuration set.
We address this issue by separating buildNode into two methods:
getNodeSettings and buildNode. We first iterate over all nodes to
get nodes settings, then change the setting for the bootstrapping node
and then proceed with building the node.
2. If autoManageMinMasterNodes = false, there is no way for the test to
set the list of bootstrapping nodes because node names are not known in
advance. This problem is solved by adding updateNodesSettings method
to NodeConfigurationSource and ESIntegTestCase (which could be
overridden by concrete integration test class). Once we have the list
of settings for all nodes, the integration test class is allowed to
update it. In our case, we update the
ClusterBootrstapService.INITIAL_MASTER_NODES_SETTING setting.
Single-node discovery is not persisting cluster states, which was caused by a recent 7.0-only
refactoring. This commit ensures that the cluster state is properly persisted when using single-node
discovery and adds a corresponding test.
Commit #36786 updated docs and strings to reference transport.port instead of
transport.tcp.port. However, this breaks backwards compatibility tests
as the tests rely on string configurations and transport.port does not
exist prior to 6.6. This commit reverts the places were we reference
transport.tcp.port for tests. This work will need to be reintroduced in
a backwards compatible way.
This is related to #36652. In 7.0 we plan to deprecate a number of
settings that make reference to the concept of a tcp transport. We
mostly just have a single transport type now (based on tcp). Settings
should only reference tcp if they are referring to socket options. This
commit updates the settings in the docs. And removes string usages of
the old settings. Additionally it adds a missing remote compress setting
to the docs.
This commit removes the originalSettings member from Node. It was only
needed to allows test clusters to recreate the node in certain
situations. Instead, the test cluster now keeps track of these settings.
In order for CCS alternate execution mode (see #32125) to be able to do the final reduction step on the CCS coordinating node, we need to serialize additional info in the transport layer as part of each `SearchHit`. Sort values are already present but they are formatted according to the provided `DocValueFormat` provided. The CCS node needs to be able to reconstruct the lucene `FieldDoc` to include in the `TopFieldDocs` and `CollapseTopFieldDocs` which will feed the `mergeTopDocs` method used to reduce multiple search responses (one per cluster) into one.
This commit adds such information to the `SearchSortValues` and exposes it through a new getter method added to `SearchHit` for retrieval. This info is only serialized at transport and never printed out at REST.
This commit exposes lucene's LatLonShape field as the
default type in GeoShapeFieldMapper. To use the new
indexing approach, simply set "type" : "geo_shape" in
the mappings without setting any of the strategy, precision,
tree_levels, or distance_error_pct parameters. Note the
following when using the new indexing approach:
* geo_shape query does not support querying by
MULTIPOINT.
* LINESTRING and MULTILINESTRING queries do not
yet support WITHIN relation.
* CONTAINS relation is not yet supported.
The tree, precision, tree_levels, distance_error_pct,
and points_only parameters are deprecated.
This commit fixes a test bug introduced with #36597. This caused some
test failure as stored field values comparisons would not work when CBOR
xcontent type was used.
Closes#29080
This commit add support for using sequence numbers to power [optimistic concurrency control](http://en.wikipedia.org/wiki/Optimistic_concurrency_control)
in the delete and index transport actions and requests. A follow up will come with adding sequence
numbers to the update and get results.
Relates #36148
Relates #10708
This commit updates our transport settings for 7.0. It generally takes a
few approaches. First, for normal transport settings, it usestransport.
instead of transport.tcp. Second, it uses transport.tcp, http.tcp,
or network.tcp for all settings that are proxies for OS level socket
settings. Third, it marks the network.tcp.connect_timeout setting for
removal. Network service level settings are only settings that apply to
both the http and transport modules. There is no connect timeout in
http. Fourth, it moves all the transport settings to a single class
TransportSettings similar to the HttpTransportSettings class.
This commit does not actually remove any settings. It just adds the new
renamed settings and adds todos for settings that will be deprecated.
SearchSortValuesTests extends now `AbstractSerializingTestCase` which removes some code duplication and standardizes the way we test `fromXContent`, serialization and equals/hashcode.
Also, we were never creating `SearchSortValues` through their public constructor that accept an array of `DocValueFormat` together with the array of raw sort values. That is covered now, which involved some conversion from `BytesRef` to String in the test.
Also, the previous test was not using doing any equality check against the original and parsed versions in `testFromXContent` due to values being parsed with different types in some cases, which is now covered by converting those values using a new method added to `RandomObjects`. The code was already there as part of `randomStoredFieldValues`, but it is now exposed to be used in other scenarios.
In order for CCS alternate execution mode (see #32125) to be able to do the final reduction step on the CCS coordinating node, we need to serialize additional info in the transport layer as part of the `SearchHits`, specifically:
- lucene `SortField[]` which contains info about the fields that sorting was performed on and their type, which depends on mappings (that the CCS node does not know about)
- collapse field (`String`) that field collapsing was executed on, if requested
- collapse values (`Object[]`) that field collapsing was based on, if requested
This info is needed to be able to reconstruct the `TopFieldDocs` or `CollapseFieldTopDocs` in the CCS coordinating node to feed the `mergeTopDocs` method and reduce multiple search responses received (one per cluster) into one.
This commit adds such information to the `SearchHits` class. It's nullable info that is not serialized through the REST layer. `SearchPhaseController` sets such info at the end of the hits reduction phase.
* Enable parallel restore operations
* Add uuid to restore in progress entries to uniquely identify them
* Adjust restore in progress entries to be a map in cluster state
* Added tests for:
* Parallel restore from two different snapshots
* Parallel restore from a single snapshot to different indices to test uuid identifiers are correctly used by `RestoreService` and routing allocator
* Parallel restore with waiting for completion to test transport actions correctly use uuid identifiers
The commit changes how indices are closed in the MetaDataIndexStateService.
It now uses a 3 steps process where writes are blocked on indices to be closed,
then some verifications are done on shards using the TransportVerifyShardBeforeCloseAction
added in #36249, and finally indices states are moved to CLOSE and their routing
tables removed.
The closing process also takes care of using the pre-7.0 way to close indices if the
cluster contains mixed version of nodes and a node does not support the TransportVerifyShardBeforeCloseAction. It also closes unassigned indices.
Related to #33888
This commit add support to engine operations for resolving and verifying the sequence number and
primary term of the last modification to a document before performing an operation. This is
infrastructure to move our (optimistic concurrency control)[http://en.wikipedia.org/wiki/Optimistic_concurrency_control] API to use sequence numbers instead of internal versioning.
Relates #36148
Relates #10708
There are certain BootstrapCheck checks that may need access environment-specific
values. Watcher's EncryptSensitiveDataBootstrapCheck passes in the node's environment
via a constructor to bypass the shortcoming in BootstrapContext. This commit
pulls in the node's environment into BootstrapContext.
Another case is found in #36519, where it is useful to check the state of the
data-path. Since PathUtils.get and Paths.get are forbidden APIs, we rely on
the environment to retrieve references to things like node data paths.
This means that the BootstrapContext will have the same Settings used in the
Environment, which currently differs from the Node's settings.
Currently TransportRequestOptions allows specific requests to request
compression. This commit removes this and always compresses based on the
settings. Additionally, it removes TransportResponseOptions as they
are unused.
This closes#36399.
Tanguy Leroux
Mayya Sharipova
Jason Tedor
Julie Tibshirani
David Turner
Alpar Torok
Simon Willnauer
Armin Braun
Jim Ferenczi
David Findley
Josh Soref
Luca Cavanna
Andrey Ershov
Nhat Nguyen
Tim Brooks
Yannick Welsch
Alan Woodward
Ryan Ernst
Nicholas Knize
Boaz Leskes
Tal Levy