With #24236, the master now uses the pending queue when publishing to itself. This means that a cluster state update is put into the pending queue,
then sent to the ClusterApplierService to be applied. After it has been applied, it is marked as processed and removed from the pending queue.
ensureGreen is implemented as a cluster health action that waits on certain conditions, which will lead to a cluster state update task to be submitted
on the master. When this task gets to run and the conditions are not satisfied yet, it register a cluster state observer. This observer is registered
on the ClusterApplierService and waits on cluster state change events. ClusterApplierService first notifies the observer and then the discovery
layer. This means that there is a small time frame where ensureGreen can complete and call the node stats to find the pending queue still containing
the last cluster state update.
Closes#24388
Failure detection should only be updated in ZenDiscovery after the current state has been updated to prevent a race condition
with handleLeaveRequest and handleNodeFailure as those check the current state to determine whether the failure is to be handled by this node.
Open/close index API when executed providing an index expressions that matched no indices, threw an error even when allow_no_indices was set to true. The APIs should rather honour the option and behave as a no-op in that case.
Closes#24031
Currently we don't write the count value to the geo_centroid aggregation rest response,
but it is provided via the java api and the count() method in the GeoCentroid interface.
We should add this parameter to the rest output and also provide it via the getProperty()
method.
Eclipse doesn't allow extra semicolons after an import statement:
```
import foo.Bar;; // <-- syntax error!
```
Here is the Eclipse bug:
https://bugs.eclipse.org/bugs/show_bug.cgi?id=425140
which the Eclipse folks closed as "the spec doesn't allow these
semicolons so why should we?" Which is fair. Here is the bug
against javac for allowing them:
https://bugs.openjdk.java.net/browse/JDK-8027682
which hasn't been touched since 2013 without explanation. There
is, however, a rather educations mailing list thread:
http://mail.openjdk.java.net/pipermail/compiler-dev/2013-August/006956.html
which contains gems like, "In general, it is better/simpler to
change javac to conform to the spec. (Except when it is not.)"
I suspect the reason this hasn't been fixed is:
```
FWIW, if we change javac such that the set of programs accepted by javac
is changed, we have an process (currently Oracle internal) to get
approval for such a change. So, we would not simply change javac on a
whim to meet the spec; we would at least have other eyes looking at the
behavioral change to determine if it is "acceptable".
```
from http://mail.openjdk.java.net/pipermail/compiler-dev/2013-August/006973.html
The alias parameter was documented as a list in our rest-spec, yet only the first value out of a list was getting read and processed. This commit adds support for multiple aliases to _cat/aliases
Closes#23661
The version on an update request is a syntactic sugar
for get of a specific version, doc merge and a version
index. This changes it to reject requests with both
upsert and a version.
If the upsert index request is versioned, we also
reject the op.
The previous commit (35f78d098a) introduced an assertion in ZenDiscovery that was overly restrictive - it could trip when a cluster state that was
successfully published would not be applied locally because a master with a better cluster state came along in the meantime.
Separates cluster state publishing from applying cluster states:
- ClusterService is split into two classes MasterService and ClusterApplierService. MasterService has the responsibility to calculate cluster state updates for actions that want to change the cluster state (create index, update shard routing table, etc.). ClusterApplierService has the responsibility to apply cluster states that have been successfully published and invokes the cluster state appliers and listeners.
- ClusterApplierService keeps track of the last applied state, but MasterService is stateless and uses the last cluster state that is provided by the discovery module to calculate the next prospective state. The ClusterService class is still kept around, which now just delegates actions to ClusterApplierService and MasterService.
- The discovery implementation is now responsible for managing the last cluster state that is used by the consensus layer and the master service. It also exposes the initial cluster state which is used by the ClusterApplierService. The discovery implementation is also responsible for adding the right cluster-level blocks to the initial state.
- NoneDiscovery has been renamed to TribeDiscovery as it is exclusively used by TribeService. It adds the tribe blocks to the initial state.
- ZenDiscovery is synchronized on state changes to the last cluster state that is used by the consensus layer and the master service, and does not submit cluster state update tasks anymore to make changes to the disco state (except when becoming master).
Control flow for cluster state updates is now as follows:
- State updates are sent to MasterService
- MasterService gets the latest committed cluster state from the discovery implementation and calculates the next cluster state to publish
- MasterService submits the new prospective cluster state to the discovery implementation for publishing
- Discovery implementation publishes cluster states to all nodes and, once the state is committed, asks the ClusterApplierService to apply the newly committed state.
- ClusterApplierService applies state to local node.
- Getters for DateHisto `interval` and `offset` should return a
long, not double
- Add getter for the filter in a FilterAgg
- Add getters for subaggs / pipelines in base AggregationBuilder
Allow the `Context` to be used in the builder function used within ConstructingObjectParser.
This facilitates scenarios where a constructor argument comes from a URL parameter, or from document id.
The tribe service can take a while to initialize, depending on how many cluster it needs to connect to. This change moves writing the ports file used by tests to before the tribe service is started.
This adds the `index.mapping.single_type` setting, which enforces that indices
have at most one type when it is true. The default value is true for 6.0+ indices
and false for old indices.
Relates #15613
The one argument ctor for `Script` creates a script with the
default language but most usages of are for testing and either
don't care about the language or are for use with
`MockScriptEngine`. This replaces most usages of the one argument
ctor on `Script` with calls to `ESTestCase#mockScript` to make
it clear that the tests don't need the default scripting language.
I've also factored out some copy and pasted script generation
code into a single place. I would have had to change that code
to use `mockScript` anyway, so it was easier to perform the
refactor.
Relates to #16314
In case of a Cross Cluster Search, the coordinating node should split the original indices per cluster, and send over to each cluster only its own set of original indices, rather than the set taken from the original search request which contains all the indices.
In fact, each remote cluster should not be aware of the indices belonging to other remote clusters.
This test can run into a split-brain situation as minimum_master_nodes is not properly set. To prevent this, make sure that at least one of the two
master nodes that are initially started has minimum_master_nodes correctly set.
When an index is shrunk using the shrink APIs, the shrink operation adds
some internal index settings to the shrink index, for example
`index.shrink.source.name|uuid` to denote the source index, as well as
`index.routing.allocation.initial_recovery._id` to denote the node on
which all shards for the source index resided when the shrunken index
was created. However, this presents a problem when taking a snapshot of
the shrunken index and restoring it to a cluster where the initial
recovery node is not present, or restoring to the same cluster where the
initial recovery node is offline or decomissioned. The restore
operation fails to allocate the shard in the shrunken index to a node
when the initial recovery node is not present, and a restore type of
recovery will *not* go through the PrimaryShardAllocator, meaning that
it will not have the chance to force allocate the primary to a node in
the cluster. Rather, restore initiated shard allocation goes through
the BalancedShardAllocator which does not attempt to force allocate a
primary.
This commit fixes the aforementioned problem by not requiring allocation
to occur on the initial recovery node when the recovery type is a
restore of a snapshot. This commit also ensures that the internal
shrink index settings are recognized and not archived (which can trip an
assertion in the restore scenario).
Closes#24257
This code removes a few lines of dead code from ScriptedMetricAggregationBuilder.
Just completely dead code, it adds things to a Set that is then not used in any way.
Another step down the road to dropping the
lucene-analyzers-common dependency from core.
Note that this removes some tests that no longer compile from
core. I played around with adding them to the analysis-common
module where they would compile but we already test these in
the tests generated from the example usage in the documentation.
I'm not super happy with the way that `requriesAnalysisSettings`
works with regards to plugins. I think it'd be fairly bug-prone
for plugin authors to use. But I'm making it visible as is for
now and I'll rethink later.
A part of #23658
Currently InternalPercentilesBucket#percentile() relies on the percent array passed in
to be in sorted order. This changes the aggregation to store an internal lookup table that
is constructed from the percent/percentiles arrays passed in that can be used to look up
the percentile values.
Closes#24331
In case of a bridge partition, shard allocation can fail "index.allocation.max_retries" times if the master is the super-connected node and recovery
source and target are on opposite sides of the bridge. This commit adds a reroute with retry_failed after healing the network partition so that the
ensureGreen check succeeds.
StreamInput has methods such as readVInt that perform sanity checks on the data using assertions,
which will catch bad data in tests but provide no safety when running as a node without assertions
enabled. The use of assertions also make testing with invalid data difficult since we would need
to handle assertion errors in the code using the stream input and errors like this should not be
something we try to catch. This commit introduces a flag that will throw an IOException instead of
using an assertion.
The percolator doesn't close the IndexReader of the memory index any more.
Prior to 2.x the percolator had its own SearchContext (PercolatorContext) that did this,
but that was removed when the percolator was refactored as part of the 5.0 release.
I think an alternative way to fix this is to let percolator not use the bitset and fielddata caches,
that way we prevent the memory leak.
Closes#24108
This commit replaces two alternating regular expressions (that is,
regular expressions that consist of the form a|b where a and b are
characters) with the equivalent regular expression rewritten as a
character class (that is, [ab]) The reason this is an improvement is
because a|b involves backtracking while [ab] does not.
Relates #24316
This commit adds a compileTemplate method to the ScriptService.
Eventually this will be used to easily cutover all consumers to a new
TemplateService.
relates #16314
The `count` value in the stats aggregation represents a simple doc count
that doesn't require a formatted version. We didn't render an "as_string"
version for count in the rest response, so the method should also be
removed in favour of just using String.valueOf(getCount()) if a string
version of the count is needed.
Closes#24287
There was a bug in the calculation of the shards that a snapshot must
wait on, due to their relocating or initializing, before the snapshot
can proceed safely to snapshot the shard data. In this bug, an
incorrect key was used to look up the index of the waiting shards,
resulting in the fact that each index would have at most one shard in
the waiting state causing the snapshot to pause. This could be
problematic if there are more than one shard in the relocating or
initializing state, which would result in a snapshot prematurely
starting because it thinks its only waiting on one relocating or
initializing shard (when in fact there could be more than one). While
not a common case and likely rare in practice, it is still problematic.
This commit fixes the issue by ensuring the correct key is used to look
up the waiting indices map as it is being built up, so the list of
waiting shards for each index (those shards that are relocating or
initializing) are aggregated for a given index instead of overwritten.
If the user explicitly configured path.data to include
default.path.data, then we should not fail the node if we find indices
in default.path.data. This commit addresses this.
Relates #24285
This commit fixes the hash code for AliasFilter as the previous
implementation was neglecting to take into consideration the fact that
the aliases field is an array and thus a deep hash code of it should be
computed rather than a shallow hash code on the reference.
Relates #24286
The tribe was being shutdown by the test while a publishing round (that adds the tribe node to a cluster) is not completed yet (i.e. the node itself
knows that it became part of the cluster, and the test shuts the tribe node down, but another node has not applied the cluster state yet, which makes
that node hang while trying to connect to the node that is shutting down (due to connect_timeout being 30 seconds), delaying publishing for 30
seconds, and subsequently tripping an assertion when another tribe instance wants to join.
Relates to #23695
When parsing StoredSearchScript we were adding a Content type option that was forbidden (by a check that threw an exception) by the parser thats used to parse the template when we read it from the cluster state. This was stopping Elastisearch from starting after stored search templates had been added.
This change no longer adds the content type option to the StoredScriptSource object when parsing from the put search template request. This is safe because the StoredScriptSource content is always JSON when its stored in the cluster state since we do a conversion to JSON before this point.
Also removes the check for the content type in the options when parsing StoredScriptSource so users who already have stored scripts can start Elasticsearch.
Closes#24227
ScriptService has two executable methods, one which takes a
CompiledScript, which is similar to search, and one that takes a raw
Script and both compiles and returns an ExecutableScript for it. The
latter is not needed, and the call sites which used one or the other
were mixed. This commit removes the extra executable method in favor of
callers first calling compile, then executable.
The unwrap method was leftover from support javascript and python. Since
those languages are removed in 6.0, this commit removes the unwrap
feature from scripts.
Before #22488 when an index couldn't be created during a `_bulk`
operation we'd do all the *other* actions and return the index
creation error on each failing action. In #22488 we accidentally
changed it so that we now reject the entire bulk request if a single
action cannot create an index that it must create to run. This
gets reverts to the old behavior while still keeping the nicer
error messages. Instead of failing the entire request we now only
fail the portions of the request that can't work because the index
doesn't exist.
Closes#24028
Yannick Welsch
olcbean
Christoph Büscher
Nik Everett
Guillaume Le Floch
Kunal Kapoor
Toby McLaughlin
Zachary Tong
Ryan Ernst
Ali Beyad
Tim Vernum
Clinton Gormley
Adrien Grand
Koen De Groote
Luca Cavanna
Martijn van Groningen
Jay Modi
Nilabh Sagar
Jason Tedor
Colin Goodheart-Smithe