This PR adds build configuration to use the `jdk-download` plugin with
unit tests when no runtime java is configured externally.
It's a first part in a longer chain of changes described in #40531.
This commit upgrades the JDK that is bundled with Windows from 13+33 to
13.0.1+9. Our other platforms have previously been upgraded but Windows
was delayed because the artifacts were not available at the time that we
made the previous upgrade.
Relates #48587
The bats tests require several distributions to all be built into a
single directory. The addition of docker packaging tests now cause the
bats tests to depend on docker, even though docker is not used there.
This commit filters out docker distributions from those that bats
depends on.
The RunTask is responsible for logging output from nodes to the console
and also stays active since we want the cluster to keep running.
However, the implementation of the logging and waiting resulted in a
spin loop that continually polls for data to have been written to one
of the nodes' output files. On my laptop, this causes an idle
invocation of `gradle run` to consume an entire core.
The JDK provides a method to be notified of changes to files through
the use of a WatchService. While a WatchService based implementation
for logging and waiting works, a delay of up to ten seconds is
encountered when running on macOS. This is due to the lack of a native
WatchService implementation that uses kqueue or FSEvents; the current
WatchService implementation in the JDK uses polling with a default
interval of ten seconds. While the interval can be changed
programmatically it is not an acceptable solution due to the need to
access the com.sun.nio.file.SensitivityWatchEventModifier enum, which
is in an internal package.
The change in this commit instead introduces a check to see if any data
was available to read and log. If no data is available in any of the
node output files, the thread sleeps for 100ms. This is enough time to
prevent consuming large amounts of cpu while still providing output to
the console in a timely fashion.
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
Backport of #48450.
Make a number of changes so that code in the `server` directory is more
resilient to automatic formatting. This covers:
* Reformatting multiline JSON to embed whitespace in the strings
* Move some comments around to they aren't auto-formatted to a strange
place. This also required moving some `&&` and `||` operators from the
end-of-line to start-of-line`.
* Add helper method `reformatJson()`, to strip whitespace from a JSON
document using XContent methods. This is sometimes necessary where
a test is comparing some machine-generated JSON with an expected
value.
Also, `HyperLogLogPlusPlus.java` is now excluded from formatting because it
contains large data tables that don't reformat well with the current settings,
and changing the settings would be worse for the rest of the codebase.
Backport of #48898.
We no longer configure distributions for prior versions for Docker. This
is because doing so prompts Gradle to try and resolve the Docker
dependencies, which doesn't work as they can't be downloaded via Ivy
(configured in DistributionDownloadPlugin). Since we need these for the
BATS upgrade tests, and those tests only cover .rpm and .deb, it's OK to
omit creating such distributions in the first place. We may need to
revisit this in the future, to allow upgrade testing using Docker
containers.
Backport of #48883.
Per elastic/infra#15864, the Elasticsearch CI images are failing due to
a packer_cache failure. This is because Gradle is trying to resolve
a `.docker` file through the Ivy repository, which doesn't work. Disable
the Docker tests again until we figure out the way forward.
Backport of #46599 and #47640. Add packaging tests for Docker.
* Introduce packaging tests for Docker (#46599)
Closes#37617. Add packaging tests for our Docker images, similar to what
we have for RPMs or Debian packages. This works by running a container and
probing it e.g. via `docker exec`. Test can also be run in Vagrant, by
exporting the Docker images to disk and loading them again in VMs. Docker
is installed via `Vagrantfile` in a selection of boxes.
* Only define Docker pkg tests if Docker is available (#47640)
Closes#47639, and unmutes tests that were muted in b958467.
The Docker packaging tests were being defined irrespective of whether
Docker was actually available in the current environment. Instead,
implement exclude lists so that in environments where Docker is not
available, no Docker packaging tests are defined. For CI hosts, the build
checks `.ci/dockerOnLinuxExclusions`. The Vagrant VMs can defined the
extension property `shouldTestDocker` property to opt-in to packaging
tests.
As part of this, define a seperate utility class for checking Docker,
and call that instead of defining checks in-line in BuildPlugin.groovy
This commit introduces a consistent, and type-safe manner for handling
global build parameters through out our build logic. Primarily this
replaces the existing usages of extra properties with static accessors.
It also introduces and explicit API for initialization and mutation of
any such parameters, as well as better error handling for uninitialized
or eager access of parameter values.
Closes#42042
This commit eliminates some custom logic we have in place for post-hoc
cleanup of POM files generated by Gradle. There were to main issues this
logic was meant to address:
First, for dependencies marked as `transitive = false`, Gradle by
default creates a "wildcard" exclusion in the generated POM file. It
turns out that Ivy didn't handle these types of exclusions well, even
though they are perfectly valid and dealt with by Gradle and Maven as
expected. We've since confirmed that this issues is indeed resolved in
the most recent Ivy release (2.5.0-rc1) so going forward the suggestion
to folks consuming Elasticsearch dependencies with Ivy will be to use
this version.
Second, earlier versions of Gradle would incorrectly assign compile
dependencies to the "runtime" scope in the publish POM file. This could
cause issues if the dependencies were indeed needed at compile time
because their APIs were exposed. This has since been fixed and these
dependencies are correctly marked as "compile" scope in the POM.
Since these two issues have been resolved in their respective projects
we can eliminate this logic and all the supporting code, such as having
to create lots of "internal" configurations for tracking transitive
dependencies.
This commit simplifies and standardizes our usage of the Gradle Shadow
plugin to conform more to plugin conventions. The custom "bundle" plugin
has been removed as it's not necessary and performs the same function
as the Shadow plugin's default behavior with existing configurations.
Additionally, this removes unnecessary creation of a "nodeps" artifact,
which is unnecessary because by default project dependencies will in
fact use the non-shadowed JAR unless explicitly depending on the
"shadow" configuration.
Finally, we've cleaned up the logic used for unit testing, so we are
now correctly testing against the shadow JAR when the plugin is applied.
This better represents a real-world scenario for consumers and provides
better test coverage for incorrectly declared dependencies.
(cherry picked from commit 3698131109c7e78bdd3a3340707e1c7b4740d310)
This commit bumps the bundled JDK to 13.0.1+9. Since AdoptOpenJDK did
not release 13.0.1+9 for Windows, this commit also enables that the
bundled JDK version can vary by platform.
Reverting the change introducing IsoLocal.ROOT and introducing IsoCalendarDataProvider that defaults start of the week to Monday and requires minimum 4 days in first week of a year. This extension is using java SPI mechanism and defaults for Locale.ROOT only.
It require jvm property java.locale.providers to be set with SPI,COMPAT
closes#41670
backport #48209
* Always publish a build scan in CI
This PR changes the build scan configuration to alwasy publisha build
scan when running in our CI.
We should alkready be passing these env vars into the Vagrant VM so this
will make it produce a build scan too.
The old properties to accept build scan ToS on the public server are
thus no longer relevant and will be cleaned up from the Jenkins config
once this is merged.
* Pass env vars to vagrant VM
* Enable running in parallel in the VM
* Add job name and build nomber as custom values
The classpath for some project could outgrow the max allowed command
line on Windows. Using an env var is not fault proof, but give more
breathing room
This commit removes the option to change the netty system properties to
reenable the direct buffer pooling. It also removes the need for us to
disable the buffer pooling in the system properties file. Instead, we
programmatically craete an allocator that is used by our networking
layer.
This commit does introduce an Elasticsearch property which allows the
user to fallback on the netty default allocator. If they choose this
option, they can configure the default allocator how they wish using the
standard netty properties.
Before this change one needed to re-start debugging several times, as we
launched multiple JVMs in debug mode.
With this option the IDE has the option to re-launch and listen for
connections again leading for to a more pleasant experience.
The distribution download plugin which handles finding built
distributions for testing currently only knows how to find locally built
snapshots. When an external Elasticsearch plugin uses build-tools, these
snapshots do not exist. This commit extends the download plugin so it
pulls from the Elastic snapshots service when used outside of the
Elasticsearch repository.
closes#47123
* GlobalBuildInfo plugin searches packed references
In recent versions of Git, references may be packed in a packed-refs
file. If this happens, Gradle will need to look in that file to find
build information.
We fixed warnings related to task input and outputs in #45098.
This particular input was not considered, a warning was present for it
and Gradle didn't use it as part of task inputs.
As soon as we fixed it Gradle started considering it an input and
enforced that it exists.
With this change we make it optional as the task can work both wih and
without this directory.
In order to work with external elasticsearch plugins, some parts of
build-tools need to know when the current build is part of the
elasticsearch project or an external build. We identify these "internal"
builds by a marker in our buildSrc classpath. However, some build-tools
integ tests need to override this flag to test both the external and
internal behavior.
This commit moves the storage of the flag indicating whether we are
running in an internal build to global build info. This will allow
testkit projects to override the flag.
The global build info plugin prints high level information about the
build, including the test seed. However, BuildPlugin sets up the test
seed, which creates an odd implicit dependency on it. This commit moves
the intialization of the testSeed property into the global build info.
This commit adds a thread filter for gradle unit tests which omits
threads gradle may create that we have no control over shutting down.
The current example of this is for project.exec which gradle pools.
closes#47417
* Convert RunTask to use testclusers, remove ClusterFormationTasks
This PR adds a new RunTask and a way for it to start a
testclusters cluster out of band and block on it to replace
the old RunTask that used ClusterFormationTasks.
With this we can now remove ClusterFormationTasks.
* Use versions specific distribution folders so we don't need to clean up (#46539)
* Retry deleting distro dir on windows
When retarting the cluster we clean up old distribution files that might
still be in use by the OS.
Windows closes resources of ded processes async, so we do a couple of
retries to get arround it.
Closes#46014
* Avoid having to delete the distro folder.
* Remove the use of ClusterFormationTasks form RestTestTask (#47022)
This PR removes a use-case of the ClusterFormationTasks and converts a
project that flew under the radar so far.
There's probably more clean-up possible here, but for now the goal is
to be able to remove that code after `RunTask` is also updated.
* Migrate some 7.x only projects
* Bwc testclusters all (#46265)
Convert all bwc projects to testclusters
* Fix bwc versions config
* WIP fix rolling upgrade
* Fix bwc tests on old versions
* Fix rolling upgrade
This PR makes the necesary adaptations to the tests and adds a power shell script to
invoke the OS tests on GCP instances connected as CI workers.
Also noticed that logs were not being produced by the tests and that theses were not using log4j so fixed that too.
One of the difficulties in working on theses tests was that the tests just stalled with no indication where the problem is.
To ease with the debugging, after process explorer suggested that the tests are running some commands, we now have multiple timeouts: one for the tests ( which will generate a thread dump ) and one for individual commands ( that bails with the command being ran and output and error so far ) to make it easier to see what went wrong.
The tests were blocking because apparently the pipes to the sub-process were not closing, thus the threads were blocking on them and we were blocking indefinitely on the join. I'm not sure why this doesn't happen in vagrant, but we now properly deal with it.
* Remove eclipse conditionals
We used to have some meta projects with a `-test` prefix because
historically eclipse could not distinguish between test and main
source-sets and could only use a single classpath.
This is no longer the case for the past few Eclipse versions.
This PR adds the necessary configuration to correctly categorize source
folders and libraries.
With this change eclipse can import projects, and the visibility rules
are correct e.x. auto compete doesn't offer classes from test code or
`testCompile` dependencies when editing classes in `main`.
Unfortunately the cyclic dependency detection in Eclipse doesn't seem to
take the difference between test and non test source sets into account,
but since we are checking this in Gradle anyhow, it's safe to set to
`warning` in the settings. Unfortunately there is no setting to ignore
it.
This might cause problems when building since Eclipse will probably not
know the right order to build things in so more wirk might be necesarry.
* Add support for bwc for testclusters and convert full cluster restart (#45374)
* Testclusters fix bwc (#46740)
Additions to make testclsuters work with lather versions of ES
* Do common node config on bwc tests
Before this PR we always ever ran `ElasticsearchCluster.start` once, and
the common node config was never done.
This becomes apparent in upgrading from `6.x` to `7.x` as the new config
is missing preventing the cluster from starting.
* Do common node config on bwc tests
Before this PR we always ever ran `ElasticsearchCluster.start` once, and
the common node config was never done.
This becomes apparent in upgrading from `6.x` to `7.x` as the new config
is missing preventing the cluster from starting.
* Fix logic to pick up snapshot from 6.x
* Make sure ports are cleared
* Fix test
* Don't clear all the config as we rely on it
* Fix removal of keys
This commit adds a Java source formatter and checker into the build process.
This is not yet enabled for any sub-projects - to format and check a
sub-project, add its Gradle path into `build.gradle` and run:
./gradlew spotlessApply
to format, and:
./gradlew spotlessJavaCheck
# or:
./gradlew precommit
to verify formatting.
#46180 added support for the `[source,console]`
language for snippets which should be tested.
This removes support for the `// CONSOLE` magic comment,
which serve a similar purpose.
Snippets that include the `// CONSOLE` magic comment will return
an exception.
Currently in production instances of Elasticsearch we set a couple of
system properties by default. We currently do not apply all of these
system properties in tests. This commit applies these properties in the
tests.
This PR adds some restrictions around testfixtures to make sure the same service ( as defiend in docker-compose.yml ) is not shared between multiple projects.
Sharing would break running with --parallel.
Projects can still share fixtures as long as each has it;s own service within.
This is still useful to share some of the setup and configuration code of the fixture.
Project now also have to specify a service name when calling useCluster to refer to a specific service.
If this is not the case all services will be claimed and the fixture can't be shared.
For this reason fixtures have to explicitly specify if they are using themselves ( fixture and tests in the same project ).
This commit disables caching of BWC snapshot distributions in the "trunk" (aka master) branch.
Since the previous major release branches move quickly we rarely get cache hits for these
tasks, and the artifacts themselves are very large. This means the overhead here is high and
savings basically zero. We conditionally disable task output caching in this scenario in CI to
avoid excessive build cache overhead as well as causing too much turn in the cache itself which
would lead to lots of cache entry evictions.
With the next minor release of Elasticsearch we will drop support for
JDK 12 and bump to JDK 13. While we want to use AdoptOpenJDK as the
bundled JDK, we are waiting for a release there. This commit moves to
OpenJDK 13 for now, and we will move to AdoptOpenJDK 13 as soon as its
available. Since macOS Catalina is delayed until October, we have some
time to update this.
This commit teaches the build how to bundle AdoptOpenJDK with our
artifacts, and switches to AdoptOpenJDK as the bundled JDK. We keep the
functionality to also bundle Oracle OpenJDK distributions.
In some cases (for example some AdoptOpenJDK builds), the java.vendor is
mistakenly populated as "Oracle Corporation" while the real value is
under "java.vendor.version". Since "java.vendor.version" is mandatory
since JDK 10, this commit changes to use "java.vendor.version" as the
favored system property to find the JVM vendor, and we fallback to
"java.vendor" if this is not populated (as happens in some Oracle
builds). Ugh.
Before this change we would run bwc nodes with their bundled jdk if
these supported it, so the passed in runtime JDK was not honored.
This became obvius when running with FIPS.
Closes#41721
In order to track down #46091:
* Enables debug logging in REST tests for `master` and `coordination` packages
since we suspect that issues are caused by failed and then retried publications
Previously we only turned on tests if we saw either `// CONSOLE` or
`// TEST`. These magic comments are difficult for the docs build to deal
with so it has moved away from using them where possible. We should
catch up. This adds another trigger to enable testing: marking a snippet
with the `console` language. It looks like this:
```
[source,console]
----
GET /
----
```
This saves a line which is nice, I guess. But it is more important to me
that this is consistent with the way the docs build works now.
Similarly this enables response testing when you mark a snippet with the
language `console-result`. That looks like:
```
[source,console-result]
----
{
"result": "0.1"
}
----
```
`// TESTRESPONSE` is still available for situations like `// TEST`: when
the response isn't *in* the console-result language (like `_cat`) or
when you want to perform substitutions on the generated test.
Should unblock #46159.
This adds support for verifying that snippets with the `console-result`
language are valid json. It also switches the response snippets on the
`docs/get` page from `js` to `console-result` which will allow clients
to provide "alternatives" for them like they can now do with
`// CONSOLE` snippets.
* Pass COMPUTERNAME env var to elasticsearch.bat
When we run bin/elasticsearch with bash, we get a $HOSTNAME builtin that
contains the hostname of the machine the script is running on. When
there's no provided nodename, Elasticsearch uses the HOSTNAME to create
a nodename. On Windows, Powershell provides a $COMPUTERNAME variable for
the same purpose. CMD.EXE provides the same thing, except it's called
%COMPUTERNAME%. bin/elasticsearch.bat sets $HOSTNAME to the value of
$COMPUTERNAME. However, when testclusters invokes bin/elasticsearch.bat,
the COMPUTERNAME variable doesn't get passed in, leaving HOSTNAME null
and breaking an integration test on Windows.
This commit sets COMPUTERNAME in the environment so that our tests get
the value that Elasticsearch would have when bin/elasticsearch.bat is
invoked from the shell.
* Add null check to protect in non-Windows case
What good is it a developer to gain the whole Windows if they forfeit
their Unix? The value that fixes things on Windows is null on
Linux/Darwin, so let's null-check it.
* Override system hostnames for testclusters
Rather than relying on variable system behavior, let's just override
HOSTNAME and COMPUTERNAME and test for correct values in the integration
test that was originally failing.
* Rename constants for clarity
Since we are setting HOSTNAME and COMPUTERNAME regardless of whether the
tests are running on Windows or Linux, we shouldn't imply that constants
are only used in one case or the other.
Since credentials are required to access such a repository, and these
repositories are accessed over an encrypted protocol (https), this
commit adds support to consider S3-backed artifact repositories as
secure. Additionally, we add tests for this functionality.
This commit adds a destructiveDistroTest task which depends on all of
the distribution specific destructive tasks, which can be used by CI.
closes#45769
The java based distribution tests currently have a single Tests class
which encapsulates all of the tests for a particular distribution. The
test task in gradle then depends on all distributions being built, and
each individual tests class looks for the particular distribution it is
trying to test. This means that reproducing a single test failure
triggers all the distributions to be built, even though only one is
needed for the test.
This commit reworks the java distribution tests to pass in a particular
distribution to be tested, and changes the base test classes to be
actual test classes which have assumptions around which distributions
they operate on. For example, the archives tests will be skipped when
run with an rpm distribution, and vice versa for the package tests. This
makes reproduction much more granular. It also also better splitting up
tests around a particular use case. For example, all tests for systemd
behavior can be in one test class, and run independently of all tests
against rpm/deb distributions.
* Add input and outut tracking of built bwc versions
This PR adds tracking of the bwc versions git has as input and all the
expected files as output.
The effect is that `gradlew` is not called at all when the git has
doesn't change and the version was allready built.
Previusly gradlew would be called for the bwc version and it would have
to configure the project and go trough up to date checks to figure out
that nothing changed.
This helps when working on bwc tests locally needing to run the test
multiple times.
This should also help in CI not re-build bwc versions across different
runs.
* Enable caching of bwc builds
This commit adds CNAME reporting for transport.publish_address same way
it's done for http.publish_address.
Relates #32806
Relates #39970
(cherry picked from commit e0a2558a4c3a6b6fbfc6cd17ed34a6f6ef7b15a9)
Today we shell out to git rev-parse to read the git revision. Forking
another process is slower than reading the revision directly. This
commit changes to directly read the git revision from the repository,
avoiding to fork another process.
The dependency on copying distributions was accidentally masked by an
earlier refactoring. This commit fixes the copyDistributions task to be
run before bats tests run.
The bats tests currently require many additional artifacts to be built.
In addition to the current distributions, they need all the plugins to
be installed, as well as a randomly chosen bwc distribution. This commit
splits these two cases into their own bats task, so the dependencies do
not slow down other tasks like distroTests which do not need them.
The distro test plugin was originally designed to be applied within each
subproject, per operating system we run in a VM with vagrant. However,
for efficiency, and also ease of having a single task to run in CI when
launching within individual OS VMs, having the "destructive" tasks in a
single place is more convenient. This commit reworks the distro test
plugin to be applied to the qa/vagrant project, which now creates only
the wrapper tasks in each of the subprojects for each vagrant VM.
Before #45064, the bats tests skipped the upgrade tests when the random
upgrade version is before 6.3.0. This commit restores that behavior.
closes#45476
The vagrant based tests currently reside in a single project, creating
dozens of tasks to manage starting and stopping the vagrant VM along
with running java and bats tests within each image. This all-in-one
pattern makes parallelizing packaging tests difficult.
This commit rewrites the vagrant testing infrastructure to be
independent of the actual test runners, thus allowing each platform to
be handled in a separate subproject. Additionally, the java and bats
tests are changed to be run through a "destructive" gradle task, which
is run inside the VM. The combination of these will allow
parallelization both locally (through running several VMs at once) as
well as running the destructive tasks in CI machines dedicated to each
platform (thus removing the need for vagrant in CI).
* Restrict which tasks can use testclusters
This PR fixes a problem between the interaction of test-clusters and
build cache.
Before this any task could have used a cluster without tracking it as
input.
With this change a new interface is introduced to track the tasks that
can use clusters and we do consider the cluster as input for all of
them.
This commit makes the gitRevision property a lazy loaded value by
returning an Object implementing toString(). The Dockerfile template is
also changed to use groovy templates instead of the mavenfilter hack, so
converting to String will not happen until runtime.
We configure the service ID as the node's toString but this containes
characters that Windows doesn't like.
This PR fixes it by allowing only alphanumeric characters
This commit simplifies the handling of git revision in the build. In
particular we remove pushing git revision through the generate build
info and print build info tasks as the git revision does not need to be
cached.
This commit switches to using the full hash to build into the JAR
manifest, which is used in node startup and the REST main action to
display the build hash.
Testclusters currently provides protection from clusters living past the
life of a build by adding a shutdown hook to java. While this works in
some cases, it does not cover all cases like where the daemon is killed
with SIGKILL.
To handle these other cases, this commit replaces the shutdown hooks with
a separate process (one per build) that manages reaping external services
if gradle dies.
This commit adds the commit hash to the global build info, and adds the
git revision as an extension. There are a couple motivations for this
change:
- the current mechanism of getting the build hash does not work with
git worktrees (because jgit does not understand them)
- a follow-up will want to use the git revision when building the
Docker images, so we want it available as an extension
- it allows us to simplify our usage around the build hash as we no
longer have to hack around silliness in the info-scm plugin
A follow-up will also stop using the short hash in the product build, so
that we use the full hash there. We already know that short hashes in
our codebase do collide, so we should move to the full hash to avoid
this problem.
In https://github.com/elastic/elasticsearch/pull/41913 setting up the
temp dir for ES was moved from the env script to individual cli scripts.
However, moving it to the windows service cli was missed. This commit
restores setting up the temp dir for the windows service control script.
Backport of #43177 so that VersionProperties is Java 8 compatible and
can be used by https://github.com/elastic/elasticsearch-hadoop
to retrieve snapshot versions for Lucene.
(cherry picked from commit ec3ac9b62452f04ce44dea0a904a6e2b31dd8076)
A tool to work with snapshots.
Co-authored by @original-brownbear.
This commit adds snapshot tool and the single command cleanup, that
cleans up orphaned files for S3.
Snapshot tool lives in x-pack/snapshot-tool.
(cherry picked from commit fc4aed44dd975d83229561090f957a95cc76b287)
* Detect process third party audit being killed by OOM
It's very common for the third party audit to be killed by the OOM
killer when the system is running low on memory.
Since the forbidden APIs call is expected to fail, we were ignoring
these and incorrectly interpreting the partial output.
With this change we detect and provide a proper error message when this
happens.
The test EmptyDirTaskTests#testCreateEmptyDirNoPermissions may fail on
Windows. However, the test is only meaningful for Unix permissions
structures, so we should assume a Unix-family OS and skip the test on
Windows.
Fixes#44064
Test clusters currently has its own set of logic for dealing with
finding different versions of Elasticsearch, downloading them, and
extracting them. This commit converts testclusters to use the
DistributionDownloadPlugin.
Due to recent changes are done for converting `repository-hdfs` to test
clusters (#41252), the `integTestSecure*` tasks did not depend on
`secureHdfsFixture` which when running would fail as the fixture
would not be available. This commit adds the dependency of the fixture
to the task.
The `secureHdfsFixture` is a `AntFixture` which is spawned a process.
Internally it waits for 30 seconds for the resources to be made available.
For my local machine, it took almost 45 seconds to be available so I have
added the wait time as an input to the `AntFixture` defaults to 30 seconds
and set it to 60 seconds in case of secure hdfs fixture.
The integ test for secure hdfs was disabled for a long time and so
the changes done in #42090 to fix the tests are also done in this commit.
* Improoce how log is tailed in testclusters on failure
- only print last few lines
- print all errors and warnings
- compact repeating errors and warnings
* Test fixtures improovements
Don't disable some of the precommit tasks on fixtures.
This no longer makes sense now that a project can both produce and use a
fixture.
In order for this to be possible, had to add an additional configuration
to make JarHell class accessible to the task even if it's not a
dependency of the project and fix some of the third party audit fallout
from #43671 which wasn't detected at the time due to the issue being
fixed here.
Closes#43918
* TestClusters: Convert the security plugin
This PR moves security tests to use TestClusters.
The TLS test required support in testclusters itself, so the correct
wait condition is configgured based on the cluster settings.
* PR review
Several types of distributions are built and tested in elasticsearch,
ranging from the current version, to building or downloading snapshot or
released versions. Currently tests relying on these have to contain
logic deciding where and how to pull down these distributions.
This commit adds an distributiond download plugin for each project to
manage which versions and variants the project needs. It abstracts away
all need for knowing where a particular version comes from, like a local
distribution or bwc project, or pulling from the elastic download
service. This will be used in a followup PR by the testclusters and
vagrant tests.
Alpar Torok
Jason Tedor
Ryan Ernst
Jay Modi
Rory Hunter
Mark Vieira
Rafael Acevedo
Alexander Reelsen
Tim Brooks
Przemyslaw Gomulka
Ignacio Vera
jimczi
Uwe Schindler
William Brafford
Armin Braun
James Rodewig
Luca Cavanna
Nik Everett
Paul Sanwald
Andrey Ershov
Marios Trivyzas
david raistrick
Yogesh Gaikwad
Nick Knize
Adrien Grand
Ryan Ernst
Vincent Boulaye
Gabryel Monteiro