* HLRC: ML Add preview datafeed api
* Changing deprecation handling for parser
* Removing some duplication in docs, will address other APIs in another PR
* HLRC: ML Cleanup docs
* updating get datafeed stats docs
This further applies the pattern set in #34125 to reduce copy-and-paste
in the single document CRUD portion of the High Level REST Client docs.
It also adds line wraps to snippets that are too wide to fit into the box
when rendered in the docs, following up on the work started in #34163.
With this commit we restore the previous behavior in
`BigArraysTests#testMaxSizeExceededOnResize` but lower the sizes that
are tested to the range between 256 bytes to 16 kB so the test does not
produce a whole lot of garbage.
The previous attempt to reduce the amount of garbage produced by that
test was to properly size the array initially but it failed to account
for object alignment which lead to test failures in some cases. While it
would be possible to account for object alignment, we would need to open
up BigArrays or directly use the underlying Lucene API which would
require us to allocate an array upfront only to find its size (incl.
object alignment).
Instead we have fixed this issue by conservatively sizing the array
initially (so the initial allocation will never trip the circuit
breaker) and reduce garbage by reducing the circuit breaker's upper
bound as described previously.
Closes#33750
Relates #34325
This commit modifies the follow stats API response structure to more
clearly highlight meaning of the higher level fields. In particular,
previously the response had a top-level key for each index. Instead, we
nest the indices under an "indices" field which is now an array. The
values in this array are objects containing two fields: "index" which is
the name of the follower index, and "shards" which is an array where
each value in the array is the follower stats for that shard. That is,
we have gone from:
{
"bar": [
{
"shard_id": 0...
}...
]...
}
to
{
"indices": [
{
"index": "bar",
"shards": [
{
"shard_id": 0...
}...
]
}...
}
In the CCR docs we want to refer to the endpoint that returns following
stats as the follow stats API. This commit renames the internal
implementation of this endpoint to reflect this usage.
The "lookupUser" method on a realm facilitates the "run-as" and
"authorization_realms" features.
This commit allows a realm to be used for "lookup only", in which
case the "authenticate" method (and associated token methods) are
disabled.
It does this through the introduction of a new
"authentication.enabled" setting, which defaults to true.
Building automatons can be costly. For the most part we cache things
that use automatons so the cost is limited.
However:
- We don't (currently) do that everywhere (e.g. we don't cache role
mappings)
- It is sometimes necessary to clear some of those caches which can
cause significant CPU overhead and processing delays.
This commit introduces a new cache in the Automatons class to avoid
unnecesarily recomputing automatons.
There may be values in the thread context that ought to be preseved
for later use, even if one or more realms perform asynchronous
authentication.
This commit changes the AuthenticationService to wrap the potentially
asynchronous calls in a ContextPreservingActionListener that retains
the original thread context for the authentication.
This changes the delete job API by adding
the choice to delete a job asynchronously.
The commit adds a `wait_for_completion` parameter
to the delete job request. When set to `false`,
the action returns immediately and the response
contains the task id.
This also changes the handling of subsequent
delete requests for a job that is already being
deleted. It now uses the task framework to check
if the job is being deleted instead of the cluster
state. This is a beneficial for it is going to also
be working once the job configs are moved out of the
cluster state and into an index. Also, force delete
requests that are waiting for the job to be deleted
will not proceed with the deletion if the first task
fails. This will prevent overloading the cluster. Instead,
the failure is communicated better via notifications
so that the user may retry.
Finally, this makes the `deleting` property of the job
visible (also it was renamed from `deleted`). This allows
a client to render a deleting job differently.
Closes#32836
The `status` part of the tasks API reflects the internal status of a
running task. In general, we do not make backwards breaking changes to
the `status` but because it is internal we reserve the right to do so. I
suspect we will very rarely excercise that right but it is important
that we have it so we're not boxed into any particular implementation
for a request.
In some sense this is policy making by documentation change. In another
it is clarification of the way we've always thought of this field.
I also reflect the documentation change into the Javadoc in a few
places. There I acknowledge Kibana's "special relationship" with
Elasticsearch. Kibana parses `_reindex`'s `status` field and, because
we're friends with those folks, we should talk to them before we make
backwards breaking changes to it. We *want* to be friends with everyone
but there is only so much time in the day and we don't *want* to make
backwards breaking fields to `status` at all anyway. So we hope that
breaking changes documentation should be enough for other folks.
Relates to #34245.
* HLRC: ML Add preview datafeed api
* Changing deprecation handling for parser
* Removing some duplication in docs, will address other APIs in another PR
* SCRIPTING: Add Expr. Compile for TermSetQuery Ctx.
* Follow up to #33602 adding the ability to compile TermsSetQuery
scripts with the expressions engine in the same way we support
SearchScript in Expressions
* Duplicated the code here for now to make the change less complex,
the only difference to SearchScript is that `_score` and `_value` are not handled for TermsSetQuery
* remove redundant check
Drops the last logging constructor that takes `Settings` because it is
no longer needed.
Watcher goes through a lot of effort to pass `Settings` to `Logger`
constructors and dropping `Settings` from all of those calls allowed us
to remove quite a bit of log-based ceremony from watcher.
We generate tests from our documentation, including assertions about the
responses returned by a particular API. But sometimes we *can't* assert
that the response is correct because of some defficiency in our tooling.
Previously we marked the response `// NOTCONSOLE` to skip it, but this
is kind of odd because `// NOTCONSOLE` is really to mark snippets that
are json but aren't requests or responses. This introduces a new
construct to skip response assertions:
```
// TESTRESPONSE[skip:reason we skipped this]
```
The Security plugin authorizes actions on indices. Authorization
happens on a per index/alias basis. Therefore a request with a
Multi Index Expression (containing wildcards) has to be
first evaluated in the authorization layer, before the request is
handled. For authorization purposes, wildcards in expressions will
only be expanded to indices/aliases that are visible by the authenticated
user. However, this "constrained" evaluation has to be compatible with
the expression evaluation that a cluster without the Security plugin
would do. Therefore any change in the evaluation logic
in any of these sites has to be mirrored in the other site.
This commit mirrors the changes in core from #33518 that allowed
for Multi Index Expression in the Get Alias API, loosely speaking.
This enables Elasticsearch to use the JVM-wide configured
PKCS#11 token as a keystore or a truststore for its TLS configuration.
The JVM is assumed to be configured accordingly with the appropriate
Security Provider implementation that supports PKCS#11 tokens.
For the PKCS#11 token to be used as a keystore or a truststore for an
SSLConfiguration, the .keystore.type or .truststore.type must be
explicitly set to pkcs11 in the configuration.
The fact that the PKCS#11 token configuration is JVM wide implies that
there is only one available keystore and truststore that can be used by TLS
configurations in Elasticsearch.
The PIN for the PKCS#11 token can be set as a truststore parameter in
Elasticsearch or as a JVM parameter ( -Djavax.net.ssl.trustStorePassword).
The basic goal of enabling PKCS#11 token support is to allow PKCS#11-NSS in
FIPS mode to be used as a FIPS 140-2 enabled Security Provider.
When the cluster.routing.allocation.disk.watermark.flood_stage watermark
is breached, DiskThresholdMonitor marks the indices as read-only. This
failed when x-pack security was present as system user does not have the privilege
for update settings action("indices:admin/settings/update").
This commit adds the required privilege for the system user. Also added missing
debug logs when access is denied to help future debugging.
An assert statement is added to catch any missed privileges required for
system user.
Closes#33119
Today we use the version of a DirectoryReader as a component of the key
of IndicesRequestCache. This usage is perfectly fine since the version
is advanced every time a new change is made into IndexWriter. In other
words, two DirectoryReaders with the same version should have the same
content. However, this invariant is only guaranteed in the context of a
single IndexWriter because the version is reset to the committed version
value when IndexWriter is re-opened.
Since #33473, each IndexShard may have more than one IndexWriter, and
using the version of a DirectoryReader as a part of the cache key can
cause IndicesRequestCache to return stale cached values. For example, in
#27650, we rollback the engine (i.e., re-open IndexWriter), index new
documents, refresh, then make a count request, but the search layer
mistakenly returns the count of the DirectoryReader of the previous
IndexWriter because the current DirectoryReader has the same version of
the old DirectoryReader even their documents are different. This is
possible because these two readers come from different IndexWriters.
This commit replaces the the version with the reader cache key of
IndexReader as a component of the cache key of IndicesRequestCache.
Closes#27650
Relates #33473
In SessionFactoryLoadBalancingTests#testRoundRobinWithFailures()
we kill ldap servers randomly and immediately bind to that port
connecting to mock server socket. This is done to avoid someone else
listening to this port. As the creation of mock socket and binding to the
port is immediate, sometimes the earlier socket would be in TIME_WAIT state
thereby having problems with either bind or connect.
This commit sets the SO_REUSEADDR explicitly to true and also sets
the linger on time to 0(as we are not writing any data) so as to
allow re-use of the port and close immediately.
Note: I could not find other places where this might be problematic
but looking at test runs and netstat output I do see lot of sockets
in TIME_WAIT. If we find that this needs to be addressed we can
wrap ServerSocketFactory to set these options and use that with in
memory ldap server configuration during tests.
Closes#32190
This commit upgrades the unboundid ldapsdk to version 4.0.8. The
primary driver for upgrading is a fix that prevents this library from
rewrapping Error instances that would normally bubble up to the
UncaughtExceptionHandler and terminate the JVM. Other notable changes
include some fixes related to connection handling in the library's
connection pool implementation.
Closes#33175
This commit adds the support to early terminate the collection of a leaf
in the min/max aggregator. If the query matches all documents the min and max value
for a numeric field can be retrieved efficiently in the points reader.
This change applies this optimization when possible.
The `DnRoleMapper` class is used to map distinguished names of groups
and users to role names. This mapper builds in an internal map that
maps from a `com.unboundid.ldap.sdk.DN` to a `Set<String>`. In cases
where a lot of distinct DNs are mapped to roles, this can consume quite
a bit of memory. The majority of the memory is consumed by the DN
object. For example, a 94 character DN that has 9 relative DNs (RDN)
will retain 4KB of memory, whereas the String itself consumes less than
250 bytes.
In order to reduce memory usage, we can map from a normalized DN string
to a List of roles. The normalized string is actually how the DN class
determines equality with another DN and we can drop the overhead of
needing to keep all of the other objects in memory. Additionally the
use of a List provides memory savings as each HashSet is backed by a
HashMap, which consumes a great deal more memory than an appropriately
sized ArrayList. The uniqueness we get from a Set is maintained by
first building a set when parsing the file and then converting to a
list upon completion.
Closes#34237
* Make text message not required in constructor for slack
* Remove unnecessary comments in test file
* Throw exception when reduce or combine is not provided; update tests
* Update integration tests for scripted metrics to always include reduce and combine
* Remove some old changes from previous branches
* Rearrange script presence checks to be earlier in build
* Change null check order in script builder for aggregated metrics; correct test scripts in IT
* Add breaking change details to PR
The BWC builds for the 6.x branch should be using JDK 11. This commit
fixes the BWC builds to specify that they use JDK 11 instead of JDK 10
which is now incompatible with the 6.x build.
Now that JDK 11 is GA, we would switch our 6.x and master branches to
the JDK 11 compiler. This commit makes this change, as well as removes
JDK 10 from the CI configuration.
Jim Ferenczi
Nathan Delhaye
Alpar Torok
Benjamin Trent
Nik Everett
amoreauCoveo
Daniel Mitterdorfer
Jim Ferenczi
Jason Tedor
eray
Armin Braun
Ioannis Kakavas
Tim Vernum
Dimitris Athanasiou
Julie Tibshirani
Vladimir Dolzhenko
iverase
David Kyle
Ignacio Vera
Albert Zaharovits
Ed Savage
Ioannis Kakavas
Yogesh Gaikwad
Nhat Nguyen
Jay Modi
Kazuhiro Sera
Mayya Sharipova
albendz