We only upgrade the ID when the state is saved in one of four scenarios:
- when we reach a checkpoint (every 50 pages)
- when we run out of data
- when explicitly stopped
- on failure
The test was relying on the pre-upgrade to finish, save state and then
the post-upgrade to start, hit the end of data and upgrade ID. THEN
get the new doc and apply the new ID.
But I think this is vulnerable to timing issues. If the pre-upgrade
portion shutdown before it saved the state, when restarting we would run
through all the data from the beginning with the old ID, meaning both
docs would still have the old scheme.
This change makes the pre-upgrade wait for the job to go back to STARTED
so that we know it persisted the end point. Post-upgrade, it stops and
restarts the job to ensure the state was persisted and the ID upgraded.
That _should_ rule out the above timing issue.
Closes#32773
* Clear Job#finished_time when it is opened (#32605)
* not returning failure when Job#finished_time is not reset
* Changing error log string and source string
Skip the comparative tests using lowercasing/uppercasing against H2 (which considers the Locale).
ES-SQL is, so far, ignoring the Locale.
Still, the same queries are executed against ES-SQL alone and results asserted to be correct.
The Apache Http components support for Spnego scheme
uses canonical name by default.
Also when resolving host name, on centos by default
there are other aliases so adding them to the
DelegationPermission.
Closes#32498
Bumping down the version to 6.4 since the backport is complete. Also
adds some missing version checks to the bwc tests to make sure it
only runs on the correct versions
Previously, we were using a simple CRC32 for the IDs of rollup documents.
This is a very poor choice however, since 32bit IDs leads to collisions
between documents very quickly.
This commit moves Rollups over to a 128bit ID. The ID is a concatenation
of all the keys in the document (similar to the rolling CRC before),
hashed with 128bit Murmur3, then base64 encoded. Finally, the job
ID and a delimiter (`$`) are prepended to the ID.
This gurantees that there are 128bits per-job. 128bits should
essentially remove all chances of collisions, and the prepended
job ID means that _if_ there is a collision, it stays "within"
the job.
BWC notes:
We can only upgrade the ID scheme after we know there has been a good
checkpoint during indexing. We don't rely on a STARTED/STOPPED
status since we can't guarantee that resulted from a real checkpoint,
or other state. So we only upgrade the ID after we have reached
a checkpoint state during an active index run, and only after the
checkpoint has been confirmed.
Once a job has been upgraded and checkpointed, the version increments
and the new ID is used in the future. All new jobs use the
new ID from the start
These tests ensure, that the basic watch APIs are tested in the rolling
upgrade tests. After initially adding a watch, the tests try to get,
execute, deactivate and activate a watch. Watcher stats are tested as
well, and an own java based test has been added for restarting, as that
requires waiting for a state change. Watcher history is also checked.
Closes#31216
The User class has been moved to the protocol project for upcoming work
to add more security APIs to the high level rest client. As part of
this change, the toString method no longer uses a custom output method
from MetadataUtils and instead just relies on Java's toString
implementation.
Added support for string manipulating functions with more than one parameter:
CONCAT, LEFT, RIGHT, REPEAT, POSITION, LOCATE, REPLACE, SUBSTRING, INSERT
This change updates KerberosAuthenticationIT to resolve the host used
to connect to the test cluster. This is needed because the host could
be an IP address but SPNEGO requires a hostname to work properly. This
is done by adding a hook in ESRestTestCase for building the HttpHost
from the host and port.
Additionally, the project now specifies the IPv4 loopback address as
the http host. This is done because we need to be able to resolve the
address used for the HTTP transport before the node starts up, but the
http.ports file is not written until the node is started.
Closes#32498
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack:qa:rolling-upgrade*` projects to use
the new versions.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/qa/security-example-spi-extension`
project to use the new versions.
This commit avoids dependency during compile on copy keytab to
be present in the generated sources so pre-commit does not
stall for updating vagrant box.
Closes#32387
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack:qa:full-cluster-restart` project to use
the new versions.
This bundles the x-pack:protocol project into the x-pack:plugin:core
project because we'd like folks to consider it an implementation detail
of our build rather than a separate artifact to be managed and depended
on. It is now bundled into both x-pack:plugin:core and
client:rest-high-level. To make this work I had to fix a few things.
Firstly, I had to make PluginBuildPlugin work with the shadow plugin.
In that case we have to bundle only the `shadow` dependencies and the
shadow jar.
Secondly, every reference to x-pack:plugin:core has to use the `shadow`
configuration. Without that the reference is missing all of the
un-shadowed dependencies. I tried to make it so that applying the shadow
plugin automatically redefines the `default` configuration to mirror the
`shadow` configuration which would allow us to use bare project references
to the x-pack:plugin:core project but I couldn't make it work. It'd *look*
like it works but then fail for transitive dependencies anyway. I think
it is still a good thing to do but I don't have the willpower to do it
now.
Finally, I had to fix an issue where Eclipse and IntelliJ didn't properly
reference shadowed transitive dependencies. Neither IDE supports shadowing
natively so they have to reference the shadowed projects. We fix this by
detecting `shadow` dependencies when in "Intellij mode" or "Eclipse mode"
and adding `runtime` dependencies to the same target. This convinces
IntelliJ and Eclipse to play nice.
This commit adds support for Kerberos authentication with a platinum
license. Kerberos authentication support relies on SPNEGO, which is
triggered by challenging clients with a 401 response with the
`WWW-Authenticate: Negotiate` header. A SPNEGO client will then provide
a Kerberos ticket in the `Authorization` header. The tickets are
validated using Java's built-in GSS support. The JVM uses a vm wide
configuration for Kerberos, so there can be only one Kerberos realm.
This is enforced by a bootstrap check that also enforces the existence
of the keytab file.
In many cases a fallback authentication mechanism is needed when SPNEGO
authentication is not available. In order to support this, the
DefaultAuthenticationFailureHandler now takes a list of failure response
headers. For example, one realm can provide a
`WWW-Authenticate: Negotiate` header as its default and another could
provide `WWW-Authenticate: Basic` to indicate to the client that basic
authentication can be used in place of SPNEGO.
In order to test Kerberos, unit tests are run against an in-memory KDC
that is backed by an in-memory ldap server. A QA project has also been
added to test against an actual KDC, which is provided by the krb5kdc
fixture.
Closes#30243
* Complete changes for running IT in a fips JVM
- Mute :x-pack:qa:sql:security:ssl:integTest as it
cannot run in FIPS 140 JVM until the SQL CLI supports key/cert.
- Set default JVM keystore/truststore password in top level build
script for all integTest tasks in a FIPS 140 JVM
- Changed top level x-pack build script to use keys and certificates
for trust/key material when spinning up clusters for IT
The notion of "quality" is an overloaded term in the search ranking evaluation
context. Its usually used to decribe certain levels of "good" vs. "bad" of a
seach result with respect to the users information need. We currently report the
result of the ranking evaluation as `quality_level` which is a bit missleading.
This changes the response parameter name to `metric_score` which fits better.
* Remove BouncyCastle dependency from runtime
This commit introduces a new gradle project that contains
the classes that have a dependency on BouncyCastle. For
the default distribution, It builds a jar from those and
in puts it in a subdirectory of lib
(/tools/security-cli) along with the BouncyCastle jars.
This directory is then passed in the
ES_ADDITIONAL_CLASSPATH_DIRECTORIES of the CLI tools
that use these classes.
BouncyCastle is removed as a runtime dependency (remains
as a compileOnly one) from x-pack core and x-pack security.
Resolving wildcards in aliases expression is challenging as we may end
up with no aliases to replace the original expression with, but if we
replace with an empty array that means _all which is quite the opposite.
Now that we support and serialize the original requested aliases,
whenever aliases are replaced we will be able to know what was
initially requested. `MetaData#findAliases` can then be updated to not
return anything in case it gets empty aliases, but the original aliases
were not empty. That means that empty aliases are interpreted as _all
only if they were originally requested that way.
Relates to #31516
The rollup indexer uses a range query to select the next page
of results based on the last time bucket of the previous round
and the `delay` configured on the rollup job. This query uses
the `epoch_millis` format implicitly but doesn't set the `format`.
This result in errors during the rollup job if the field
definition doesn't allow this format. It can also miss documents
if the format is not accepted but another format in the field
definition is able to parse the query (e.g.: `epoch_second`).
This change ensures that we use `epoch_millis` as the only format
to parse the rollup range query.
* Detect and prevent configuration that triggers a Gradle bug
As we found in #31862, this can lead to a lot of wasted time as it's not
immediatly obvius what's going on.
Givent how many projects we have it's getting increasingly easier to run
into gradle/gradle#847.
Ensure our tests can run in a FIPS JVM
JKS keystores cannot be used in a FIPS JVM as attempting to use one
in order to init a KeyManagerFactory or a TrustManagerFactory is not
allowed.( JKS keystore algorithms for private key encryption are not
FIPS 140 approved)
This commit replaces JKS keystores in our tests with the
corresponding PEM encoded key and certificates both for key and trust
configurations.
Whenever it's not possible to refactor the test, i.e. when we are
testing that we can load a JKS keystore, etc. we attempt to
mute the test when we are running in FIPS 140 JVM. Testing for the
JVM is naive and is based on the name of the security provider as
we would control the testing infrastrtucture and so this would be
reliable enough.
Other cases of tests being muted are the ones that involve custom
TrustStoreManagers or KeyStoreManagers, null TLS Ciphers and the
SAMLAuthneticator class as we cannot sign XML documents in the
way we were doing. SAMLAuthenticator tests in a FIPS JVM can be
reenabled with precomputed and signed SAML messages at a later stage.
IT will be covered in a subsequent PR
There have been changes in error messages for `SSLHandshakeException`.
This has caused a couple of failures in our tests.
This commit modifies test verification to assert on exception type of
class `SSLHandshakeException`.
There was another issue in Java11 which caused NPE. The bug has now
been fixed on Java11 - early access build 22.
Bug Ref: https://bugs.java.com/bugdatabase/view_bug.do?bug_id=8206355
Enable the skipped tests due to this bug.
Closes#31940
There is currently no way to see what user executed a watch. This commit
adds the decrypted username to each execution in the watch history, in a
new field "user".
Closes#31772
The old RollupIT was a node IT, an flaky for a number of reasons.
This new version is an ESRestTestCase and should be a little more robust.
This was added to the multi-node QA tests as that seemed like the most
appropriate location. It didn't seem necessary to create a whole new
QA module.
Note: The only test that was ported was the "Big" test for validating
a larger dataset. The rest of the tests are represented in existing
yaml tests.
Closes#31258Closes#30232
Related to #30290
We can leverage the composite agg's new `missing_bucket` feature on
terms groupings. This means the aggregation criteria used in the indexer
will now return null buckets for missing keys.
Because all buckets are now returned (even if a key is null),
we can guarantee correct doc counts with
"combined" jobs (where a job rolls up multiple schemas). This was
previously impossible since composite would ignore documents that
didn't have _all_ the keys, meaning non-overlapping schemas would
cause composite to return no buckets.
Note: date_histo does not use `missing_bucket`, since a timestamp is
always required.
The docs have been adjusted to recommend a single, combined job. It
also makes reference to the previous issue to help users that are upgrading
(rather than just deleting the sections).
Historically we have loaded SSL objects (such as SSLContext,
SSLIOSessionStrategy) by passing in the SSL settings, constructing a
new SSL configuration from those settings and then looking for a
cached object that matches those settings.
The primary issue with this approach is that it requires a fully
configured Settings object to be available any time the SSL context
needs to be loaded. If the Settings include SecureSettings (such as
passwords for keys or keystores) then this is not true, and the cached
SSL object cannot be loaded at runtime.
This commit introduces an alternative approach of naming every cached
ssl configuration, so that it is possible to load the SSL context for
a named configuration (such as "xpack.http.ssl"). This means that the
calling code does not need to have ongoing access to the secure
settings that were used to load the configuration.
This change also allows monitoring exporters to use SSL passwords
from secure settings, however an exporter that uses a secure SSL setting
(e.g. truststore.secure_password) may not have its SSL settings updated
dynamically (this is prevented by a settings validator).
Exporters without secure settings can continue to be defined and updated
dynamically.
Added support for ASCII, BIT_LENGTH, CHAR, CHAR_LENGTH, LCASE, LENGTH, LTRIM, RTRIM, SPACE, UCASE functions.
Wherever Painless scripting is necessary (WHERE conditions, ORDER BY etc), those scripts are being used.
The test failure in #31916 revealed that updating
rules on a job was modifying the detectors list
in-place. That meant the old cluster state and the
updated cluster state had no difference and thus the
change was not propagated to non-master nodes.
This commit fixes that and also reviews all of ML
metadata in order to ensure immutability.
Closes#31916
A scroll holds a reference to the shard store. If the cluster is moving shards
around that reference can prevent a shard from relocating back to node it used
to be on, causing test failures.
Closes#31827
Nhat Nguyen
Zachary Tong
Benjamin Trent
Alexander Reelsen
Alpar Torok
Andrei Stefan
Yogesh Gaikwad
Zachary Tong
Jay Modi
Colin Goodheart-Smithe
Nik Everett
Igor Motov
Daniel Mitterdorfer
Tim Vernum
Ioannis Kakavas
Christoph Büscher
Luca Cavanna
Jim Ferenczi
Michael Basnight
David Kyle
Jim Ferenczi
Tim Vernum
Tom Veasey
Dimitris Athanasiou
Martijn van Groningen
Boaz Leskes