This commit adds the `rollover_alias` setting required for ILM to work
correctly to the SLM history index template and adds assertions to the
SLM integration tests to ensure that it works correctly.
Following our own guidelines, SLM should use rollover instead of purely
time-based indices to keep shard counts low. This commit implements lazy
index creation for SLM's history indices, indexing via an alias, and
rollover in the built-in ILM policy.
* Executing SLM policies on the snapshot thread will block until a snapshot finishes if the pool is completely busy executing that snapshot
* Fixes#45594
Adjusts the cluster cleanup routine in ESRestTestCase to clean up SLM
test cases, and optionally wait for all snapshots to be deleted.
Waiting for all snapshots to be deleted, rather than failing if any are
in progress, is necessary for tests which use SLM policies because SLM
policies may be in the process of executing when the test ends.
* Restrict which tasks can use testclusters
This PR fixes a problem between the interaction of test-clusters and
build cache.
Before this any task could have used a cluster without tracking it as
input.
With this change a new interface is introduced to track the tasks that
can use clusters and we do consider the cluster as input for all of
them.
* Rename indexlifecycle to ilm and snapshotlifecycle to slm (#44917)
As a followup to #44725 and #44608, which renamed the packages within
the x-pack project, this renames the packages within the core x-pack
project. It also renames 'snapshotlifecycle' within the HLRC to slm.
* Fix one more import
In order to make it easier to interpret the output of the ILM Explain
API, this commit adds two request parameters to that API:
- `only_managed`, which causes the response to only contain indices
which have `index.lifecycle.name` set
- `only_errors`, which causes the response to contain only indices in an
ILM error state
"Error state" is defined as either being in the `ERROR` step or having
`index.lifecycle.name` set to a policy that does not exist.
This commit renames the ILM package from indexlifecycle to ilm. We have
all come to know index lifecycle management as ILM, the APIs and
settings use ilm, and it would be nice of the package did too. This
commit makes that change.
This commit renames the SLM package from snapshotlifecycle to slm. We
have all come to know index lifecycle management as ILM, the APIs and
settings use ilm, and it would be nice of the package did too. For SLM,
let's use slm for all of these including the package name from the
beginning.
* Allow empty configuration for SLM policies
When putting or updating a snapshot lifecycle policy it was not possible
to elide the `config` map. This commit makes the configuration optional,
the same way that it is when taking a snapshot.
Relates to #38461
* Add Objects.requireNonNull for required parts of the policy
* Expose index age in ILM explain output
This adds the index's age to the ILM explain output, for example:
```
{
"indices" : {
"ilm-000001" : {
"index" : "ilm-000001",
"managed" : true,
"policy" : "full-lifecycle",
"lifecycle_date" : "2019-07-16T19:48:22.294Z",
"lifecycle_date_millis" : 1563306502294,
"age" : "1.34m",
"phase" : "hot",
"phase_time" : "2019-07-16T19:48:22.487Z",
... etc ...
}
}
}
```
This age can be used to tell when ILM will transition the index to the
next phase, based on that phase's `min_age`.
Resolves#38988
* Expose age in getters and in HLRC
This commit converts all remaining ActionType response classes to
writeable in xpack core. It also converts a few from server which were
used by xpack core.
relates #34389
Today we have an annotation for controlling logging levels in
tests. This annotation serves two purposes, one is to control the
logging level used in tests, when such control is needed to impact and
assert the behavior of loggers in tests. The other use is when a test is
failing and additional logging is needed. This commit separates these
two concerns into separate annotations.
The primary motivation for this is that we have a history of leaving
behind the annotation for the purpose of investigating test failures
long after the test failure is resolved. The accumulation of these stale
logging annotations has led to excessive disk consumption. Having
recently cleaned this up, we would like to avoid falling into this state
again. To do this, we are adding a link to the test failure under
investigation to the annotation when used for the purpose of
investigating test failures. We will add tooling to inspect these
annotations, in the same way that we have tooling on awaits fix
annotations. This will enable us to report on the use of these
annotations, and report when stale uses of the annotation exist.
This commit adds constructors to AcknolwedgedRequest subclasses to
implement Writeable.Reader, and ensures all future subclasses implement
the same.
relates #34389
* Add Snapshot Lifecycle Management (#43934)
* Add SnapshotLifecycleService and related CRUD APIs
This commit adds `SnapshotLifecycleService` as a new service under the ilm
plugin. This service handles snapshot lifecycle policies by scheduling based on
the policies defined schedule.
This also includes the get, put, and delete APIs for these policies
Relates to #38461
* Make scheduledJobIds return an immutable set
* Use Object.equals for SnapshotLifecyclePolicy
* Remove unneeded TODO
* Implement ToXContentFragment on SnapshotLifecyclePolicyItem
* Copy contents of the scheduledJobIds
* Handle snapshot lifecycle policy updates and deletions (#40062)
(Note this is a PR against the `snapshot-lifecycle-management` feature branch)
This adds logic to `SnapshotLifecycleService` to handle updates and deletes for
snapshot policies. Policies with incremented versions have the old policy
cancelled and the new one scheduled. Deleted policies have their schedules
cancelled when they are no longer present in the cluster state metadata.
Relates to #38461
* Take a snapshot for the policy when the SLM policy is triggered (#40383)
(This is a PR for the `snapshot-lifecycle-management` branch)
This commit fills in `SnapshotLifecycleTask` to actually perform the
snapshotting when the policy is triggered. Currently there is no handling of the
results (other than logging) as that will be added in subsequent work.
This also adds unit tests and an integration test that schedules a policy and
ensures that a snapshot is correctly taken.
Relates to #38461
* Record most recent snapshot policy success/failure (#40619)
Keeping a record of the results of the successes and failures will aid
troubleshooting of policies and make users more confident that their
snapshots are being taken as expected.
This is the first step toward writing history in a more permanent
fashion.
* Validate snapshot lifecycle policies (#40654)
(This is a PR against the `snapshot-lifecycle-management` branch)
With the commit, we now validate the content of snapshot lifecycle policies when
the policy is being created or updated. This checks for the validity of the id,
name, schedule, and repository. Additionally, cluster state is checked to ensure
that the repository exists prior to the lifecycle being added to the cluster
state.
Part of #38461
* Hook SLM into ILM's start and stop APIs (#40871)
(This pull request is for the `snapshot-lifecycle-management` branch)
This change allows the existing `/_ilm/stop` and `/_ilm/start` APIs to also
manage snapshot lifecycle scheduling. When ILM is stopped all scheduled jobs are
cancelled.
Relates to #38461
* Add tests for SnapshotLifecyclePolicyItem (#40912)
Adds serialization tests for SnapshotLifecyclePolicyItem.
* Fix improper import in build.gradle after master merge
* Add human readable version of modified date for snapshot lifecycle policy (#41035)
* Add human readable version of modified date for snapshot lifecycle policy
This small change changes it from:
```
...
"modified_date": 1554843903242,
...
```
To
```
...
"modified_date" : "2019-04-09T21:05:03.242Z",
"modified_date_millis" : 1554843903242,
...
```
Including the `"modified_date"` field when the `?human` field is used.
Relates to #38461
* Fix test
* Add API to execute SLM policy on demand (#41038)
This commit adds the ability to perform a snapshot on demand for a policy. This
can be useful to take a snapshot immediately prior to performing some sort of
maintenance.
```json
PUT /_ilm/snapshot/<policy>/_execute
```
And it returns the response with the generated snapshot name:
```json
{
"snapshot_name" : "production-snap-2019.04.09-rfyv3j9qreixkdbnfuw0ug"
}
```
Note that this does not allow waiting for the snapshot, and the snapshot could
still fail. It *does* record this information into the cluster state similar to
a regularly trigged SLM job.
Relates to #38461
* Add next_execution to SLM policy metadata (#41221)
* Add next_execution to SLM policy metadata
This adds the next time a snapshot lifecycle policy will be executed when
retriving a policy's metadata, for example:
```json
GET /_ilm/snapshot?human
{
"production" : {
"version" : 1,
"modified_date" : "2019-04-15T21:16:21.865Z",
"modified_date_millis" : 1555362981865,
"policy" : {
"name" : "<production-snap-{now/d}>",
"schedule" : "*/30 * * * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"foo-*",
"important"
],
"ignore_unavailable" : true,
"include_global_state" : false
}
},
"next_execution" : "2019-04-15T21:16:30.000Z",
"next_execution_millis" : 1555362990000
},
"other" : {
"version" : 1,
"modified_date" : "2019-04-15T21:12:19.959Z",
"modified_date_millis" : 1555362739959,
"policy" : {
"name" : "<other-snap-{now/d}>",
"schedule" : "0 30 2 * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"other"
],
"ignore_unavailable" : false,
"include_global_state" : true
}
},
"next_execution" : "2019-04-16T02:30:00.000Z",
"next_execution_millis" : 1555381800000
}
}
```
Relates to #38461
* Fix and enhance tests
* Figured out how to Cron
* Change SLM endpoint from /_ilm/* to /_slm/* (#41320)
This commit changes the endpoint for snapshot lifecycle management from:
```
GET /_ilm/snapshot/<policy>
```
to:
```
GET /_slm/policy/<policy>
```
It mimics the ILM path only using `slm` instead of `ilm`.
Relates to #38461
* Add initial documentation for SLM (#41510)
* Add initial documentation for SLM
This adds the initial documentation for snapshot lifecycle management.
It also includes the REST spec API json files since they're sort of
documentation.
Relates to #38461
* Add `manage_slm` and `read_slm` roles (#41607)
* Add `manage_slm` and `read_slm` roles
This adds two more built in roles -
`manage_slm` which has permission to perform any of the SLM actions, as well as
stopping, starting, and retrieving the operation status of ILM.
`read_slm` which has permission to retrieve snapshot lifecycle policies as well
as retrieving the operation status of ILM.
Relates to #38461
* Add execute to the test
* Fix ilm -> slm typo in test
* Record SLM history into an index (#41707)
It is useful to have a record of the actions that Snapshot Lifecycle
Management takes, especially for the purposes of alerting when a
snapshot fails or has not been taken successfully for a certain amount of
time.
This adds the infrastructure to record SLM actions into an index that
can be queried at leisure, along with a lifecycle policy so that this
history does not grow without bound.
Additionally,
SLM automatically setting up an index + lifecycle policy leads to
`index_lifecycle` custom metadata in the cluster state, which some of
the ML tests don't know how to deal with due to setting up custom
`NamedXContentRegistry`s. Watcher would cause the same problem, but it
is already disabled (for the same reason).
* High Level Rest Client support for SLM (#41767)
* High Level Rest Client support for SLM
This commit add HLRC support for SLM.
Relates to #38461
* Fill out documentation tests with tags
* Add more callouts and asciidoc for HLRC
* Update javadoc links to real locations
* Add security test testing SLM cluster privileges (#42678)
* Add security test testing SLM cluster privileges
This adds a test to `PermissionsIT` that uses the `manage_slm` and `read_slm`
cluster privileges.
Relates to #38461
* Don't redefine vars
* Add Getting Started Guide for SLM (#42878)
This commit adds a basic Getting Started Guide for SLM.
* Include SLM policy name in Snapshot metadata (#43132)
Keep track of which SLM policy in the metadata field of the Snapshots
taken by SLM. This allows users to more easily understand where the
snapshot came from, and will enable future SLM features such as
retention policies.
* Fix compilation after master merge
* [TEST] Move exception wrapping for devious exception throwing
Fixes an issue where an exception was created from one line and thrown in another.
* Fix SLM for the change to AcknowledgedResponse
* Add Snapshot Lifecycle Management Package Docs (#43535)
* Fix compilation for transport actions now that task is required
* Add a note mentioning the privileges needed for SLM (#43708)
* Add a note mentioning the privileges needed for SLM
This adds a note to the top of the "getting started with SLM"
documentation mentioning that there are two built-in privileges to
assist with creating roles for SLM users and administrators.
Relates to #38461
* Mention that you can create snapshots for indices you can't read
* Fix REST tests for new number of cluster privileges
* Mute testThatNonExistingTemplatesAreAddedImmediately (#43951)
* Fix SnapshotHistoryStoreTests after merge
* Remove overridden newResponse functions that have been removed
* Fix compilation for backport
* Fix get snapshot output parsing in test
* [DOCS] Add redirects for removed autogen anchors (#44380)
* Switch <tt>...</tt> in javadocs for {@code ...}
Test clusters currently has its own set of logic for dealing with
finding different versions of Elasticsearch, downloading them, and
extracting them. This commit converts testclusters to use the
DistributionDownloadPlugin.
This commit creates new base classes for master node actions whose
response types still implement Streamable. This simplifies both finding
remaining classes to convert, as well as creating new master node
actions that use Writeable for their responses.
relates #34389
Action is a class that encapsulates meta information about an action
that allows it to be called remotely, specifically the action name and
response type. With recent refactoring, the action class can now be
constructed as a static constant, instead of needing to create a
subclass. This makes the old pattern of creating a singleton INSTANCE
both misnamed and lacking a common placement.
This commit renames Action to ActionType, thus allowing the old INSTANCE
naming pattern to be TYPE on the transport action itself. ActionType
also conveys that this class is also not the action itself, although
this change does not rename any concrete classes as those will be
removed organically as they are converted to TYPE constants.
relates #34389
This commit replaces usages of Streamable with Writeable for the
AcknowledgedResponse and its subclasses, plus associated actions.
Note that where possible response fields were made final and default
constructors were removed.
This is a large PR, but the change is mostly mechanical.
Relates to #34389
Backport of #43414
* Narrow period of Shrink action in which ILM prevents stopping
Prior to this change, we would prevent stopping of ILM if the index was
anywhere in the shrink action. This commit changes
`IndexLifecycleService` to allow stopping when in any of the innocuous
steps during shrink. This changes ILM only to prevent stopping if
absolutely necessary.
Resolves#43253
* Rename variable for ignore actions -> ignore steps
* Fix comment
* Factor test out to test *all* stoppable steps
The description field of xpack featuresets is optionally part of the
xpack info api, when using the verbose flag. However, this information
is unnecessary, as it is better left for documentation (and the existing
descriptions describe anything meaningful). This commit removes the
description field from feature sets.
This commit adds functionality so that aliases that are manipulated on
leader indices are replicated by the shard follow tasks to the follower
indices. Note that we ignore write indices. This is due to the fact that
follower indices do not receive direct writes so the concept is not
useful.
Relates #41815
The run task is supposed to run elasticsearch with the given plugin or
module. However, for modules, this is most realistic if using the full
distribution. This commit changes the run setup to use the default or
oss as appropriate.
When the same alias points to multiple indices we can write to only one index
with `is_write_index` value `true`. The special handling in case of the put
mapping request(to resolve authorized indices) has a check on indices size
for a concrete index. If multiple indices existed then it marked the request
as unauthorized.
The check has been modified to consider write index flag and only when the
requested index matches with the one with write index alias, the alias is considered
for authorization.
Closes#40831
Usage of the ILM Move to Step API can result in some very odd
situations, and for diagnosing problems arising from these situations it
would be nice to have a record of when this API was called with what
parameters.
Also, adds a dedicated logger for TransportMoveToStepAction,
rather than using the (deprecated) inherited one.
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
Prior to this PR, there is a bug in ILM which does not allow ILM to stop
if one or more indices have an index.lifecycle.name which refers to
a policy that does not exist - the operation_mode will be stuck as
STOPPING until either the policy is created or the nonexistent
policy is removed from those indices.
This change allows ILM to stop in this case and makes the logging more
clear as to why ILM is not stopping.
Previously we only set the latch countdown with `nextStep.setLatch` after the
cluster state change has already been counted down. However, it's possible
execution could have already started, causing the latch to be missed when the
`MockAsyncActionStep` is being executed.
This moves the latch setting to be before the call to
`runPolicyAfterStateChange`, which means it is always available when the
`MockAsyncActionStep` is executed.
I was able to reproduce the failure every 30-40 runs before this change. With
this change, running 2000+ times the test passes.
Resolves#40018
When trace logging is enabled we log the computed steps for a policy. This
commit makes sure that the steps that are logged are in the same order they will
be run when the policy executes. This makes it much easier to reason about the
policy if the move-to-step API is ever required in the future.
It is possible that the Unfollow API may fail to release shard history
retention leases when unfollowing, so this needs to be handled by the
ILM Unfollow action. There's nothing much that can be done automatically
about it from the follower side, so this change makes the ILM unfollow
action simply ignore those failures.
This test should no longer pass when the functionality it is intended to
test is broken, as it now indexes a number of documents and verifies
that the index is staying on the same step until after indexing and
replication of those documents is finished. This prevents the test from
passing if the leader index progresses in its lifecycle during that time.
The SchedulerEngine is used in several places in our code and not all
of these usages properly stopped the SchedulerEngine, which could lead
to test failures due to leaked threads from the SchedulerEngine. This
change adds stopping to these usages in order to avoid the thread leaks
that cause CI failures and noise.
Closes#38875
This commit attempts to remove the retention leases on the leader shards
when unfollowing an index. This is best effort, since the leader might
not be available.
This commit is the first step in integrating shard history retention
leases with CCR. In this commit we integrate shard history retention
leases with recovery from remote. Before we start transferring files, we
take out a retention lease on the primary. Then during the file copy
phase, we repeatedly renew the retention lease. Finally, when recovery
from remote is complete, we disable the background renewing of the
retention lease.
We have had various reports of problems caused by the maxRetryTimeout
setting in the low-level REST client. Such setting was initially added
in the attempts to not have requests go through retries if the request
already took longer than the provided timeout.
The implementation was problematic though as such timeout would also
expire in the first request attempt (see #31834), would leave the
request executing after expiration causing memory leaks (see #33342),
and would not take into account the http client internal queuing (see #25951).
Given all these issues, it seems that this custom timeout mechanism
gives little benefits while causing a lot of harm. We should rather rely
on connect and socket timeout exposed by the underlying http client
and accept that a request can overall take longer than the configured
timeout, which is the case even with a single retry anyways.
This commit removes the `maxRetryTimeout` setting and all of its usages.
`CreateIndexRequest#source(Map<String, Object>, ... )`, which is used when
deserializing index creation requests, accidentally accepts mappings that are
nested twice under the type key (as described in the bug report #38266).
This in turn causes us to be too lenient in parsing typeless mappings. In
particular, we accept the following index creation request, even though it
should not contain the type key `_doc`:
```
PUT index?include_type_name=false
{
"mappings": {
"_doc": {
"properties": { ... }
}
}
}
```
There is a similar issue for both 'put templates' and 'put mappings' requests
as well.
This PR makes the minimal changes to detect and reject these typed mappings in
requests. It does not address #38266 generally, or attempt a larger refactor
around types in these server-side requests, as I think this should be done at a
later time.
This test should not pass until CCR finishes integrating shard history
retention leases. It currently sometimes passes (which is a bug in the
test), but cannot pass reliably until the linked issue is resolved.
Adds a Step to the Shrink and Delete actions which prevents those
actions from running on a leader index - all follower indices must first
unfollow the leader index before these actions can run. This prevents
the loss of history before follower indices are ready, which might
otherwise result in the loss of data.
There was a bug where creating a new policy would start
the ILM service, even if it was stopped. This change ensures
that there is no change to the existing operation mode
Previously, ShrinkAction would fail if
it was executed on an index that had
the same number of shards as the target
shrunken number.
This PR introduced a new BranchingStep that
is used inside of ShrinkAction to branch which
step to move to next, depending on the
shard values. So no shrink will occur if the
shard count is unchanged.
This commit modifies the put follow index action to use a
CcrRepository when creating a follower index. It routes
the logic through the snapshot/restore process. A
wait_for_active_shards parameter can be used to configure
how long to wait before returning the response.
We inject an Unfollow action before Shrink because the Shrink action
cannot be safely used on a following index, as it may not be fully
caught up with the leader index before the "original" following index is
deleted and replaced with a non-following Shrunken index. The Unfollow
action will verify that 1) the index is marked as "complete", and 2) all
operations up to this point have been replicated from the leader to the
follower before explicitly disconnecting the follower from the leader.
Injecting an Unfollow action before the Rollover action is done mainly
as a convenience: This allow users to use the same lifecycle policy on
both the leader and follower cluster without having to explictly modify
the policy to unfollow the index, while doing what we expect users to
want in most cases.
* Use ILM for Watcher history deletion
This commit adds an index lifecycle policy for the `.watch-history-*` indices.
This policy is automatically used for all new watch history indices.
This does not yet remove the automatic cleanup that the monitoring plugin does
for the .watch-history indices, and it does not touch the
`xpack.watcher.history.cleaner_service.enabled` setting.
Relates to #32041
Some steps, such as steps that delete, close, or freeze an index, may fail due to a currently running snapshot of the index. In those cases, rather than move to the ERROR step, we should retry the step when the snapshot has completed.
This change adds an abstract step (`AsyncRetryDuringSnapshotActionStep`) that certain steps (like the ones I mentioned above) can extend that will automatically handle a situation where a snapshot is taking place. When a `SnapshotInProgressException` is received by the listener wrapper, a `ClusterStateObserver` listener is registered to wait until the snapshot has completed, re-running the ILM action when no snapshot is occurring.
This also adds integration tests for these scenarios (thanks to @talevy in #37552).
Resolves#37541
The integ tests currently use the raw zip project name as the
distribution type. This commit simplifies this specification to be
"default" or "oss". Whether zip or tar is used should be an internal
implementation detail of the integ test setup, which can (in the future)
be platform specific.
This change adds the unfollow action for CCR follower indices.
This is needed for the shrink action in case an index is a follower index.
This will give the follower index the opportunity to fully catch up with
the leader index, pause index following and unfollow the leader index.
After this the shrink action can safely perform the ilm shrink.
The unfollow action needs to be added to the hot phase and acts as
barrier for going to the next phase (warm or delete phases), so that
follower indices are being unfollowed properly before indices are expected
to go in read-only mode. This allows the force merge action to execute
its steps safely.
The unfollow action has three steps:
* `wait-for-indexing-complete` step: waits for the index in question
to get the `index.lifecycle.indexing_complete` setting be set to `true`
* `wait-for-follow-shard-tasks` step: waits for all the shard follow tasks
for the index being handled to report that the leader shard global checkpoint
is equal to the follower shard global checkpoint.
* `pause-follower-index` step: Pauses index following, necessary to unfollow
* `close-follower-index` step: Closes the index, necessary to unfollow
* `unfollow-follower-index` step: Actually unfollows the index using
the CCR Unfollow API
* `open-follower-index` step: Reopens the index now that it is a normal index
* `wait-for-yellow` step: Waits for primary shards to be allocated after
reopening the index to ensure the index is ready for the next step
In the case of the last two steps, if the index in being handled is
a regular index then the steps acts as a no-op.
Relates to #34648
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Gordon Brown <gordon.brown@elastic.co>
This commit adds a set_priority action to the hot, warm, and cold
phases for an ILM policy. This action sets the `index.priority`
on the managed index to allow different priorities between the
hot, warm, and cold recoveries.
This commit also includes the HLRC and documentation changes.
closes#36905
* Tests: Add ElasticsearchAssertions.awaitLatch method
Some tests are using assertTrue(latch.await(...)) in their code. This
leads to an assertion error without any error message. This adds a
method which has a nicer error message and can be used in tests.
* fix forbidden apis
* fix spaces
the testFullPolicy and testMoveToRolloverStep tests
are very important tests, but they sometimes timeout
beyond the default 10sec wait for shrink to occur.
This commit increases one of the assertBusys to
20 seconds
Leaving `index.lifecycle.indexing_complete` in place when removing the
lifecycle policy from an index can cause confusion, as if a new policy
is associated with the policy, rollover will be silently skipped.
Removing that setting when removing the policy from an index makes
associating a new policy with the index more involved, but allows ILM to
fail loudly, rather than silently skipping operations which the user may
assume are being performed.
* Adjust order of checks in WaitForRolloverReadyStep
This allows ILM to error out properly for indices that have a valid
alias, but are not the write index, while still handling
`indexing_complete` on old-style aliases and rollover (that is, those
which only point to a single index at a time with no explicit write
index)
* WaitForRolloverReadyStepTests#mutateInstance sometimes did not mutate the instance
correctly
* 40_explain_lifecycle#"Test new phase still has phase_time" is not really a necessary
integration test. In addition to this, it is flaky due to the asynchronous nature of
ILM metadata population
* add read_ilm cluster privilege
Although managing ILM policies is best done using the
"manage" cluster privilege, it is useful to have read-only
views.
* adds `read_ilm` cluster privilege for viewing policies and status
* adds Explain API to the `view_index_metadata` index privilege
* add manage_ilm privileges
The error message used when attempting to delete a lifecycle policy that
is in use previously only included one index which was using the policy.
It now includes all indices using that policy.
Adds a setting that indicates that an index is done indexing, set by ILM
when the Rollover action completes. This indicates that the Rollover
action should be skipped in any future invocations, as long as the index
is no longer the write index for its alias.
This enables 1) an index with a policy that involves the Rollover action
to have the policy removed and switched to another one without use of
the move-to-step API, and 2) integrations with Beats and CCR.
RolloverStep previously had a name of "attempt_rollover", which was
inconsistent with all other step names due it its use of an underscore
instead of a dash.
RolloverAction will now periodically check the rollover conditions using
the Rollover API with the dry_run option as an AsyncWaitStep, then run
the rollover itself by calling the Rollover API with no conditions,
which will always roll over, as an AsyncActionStep. This will resolve
race condition issues in policies using RolloverAction.
Before, moving to a failed step would only change the step info
to be that of the failed step. This means two things.
1. Async Steps would never be triggered to execute
2. If there are inherent problems with the action definition that can
be fixed with a policy update, these changes were not being reflected
by the new execution info.
Changes now
1. Async steps are executed after the move to the failed step in cluster state
2. the lifecycle execution info's phase definition is updated from the current
latest policy definition, even though the index isn't moving to a new phase.
Closes#35397.
With this change, `Version` no longer carries information about the qualifier,
we still need a way to show the "display version" that does have both
qualifier and snapshot. This is now stored by the build and red from `META-INF`.
The remove-ilm-from-index API was using the DELETE http method
to signify that something is being removed. Although, metadata
about ILM for the index is being deleted, no entity/resource
is being deleted during this operation. POST is more in line with
what this API is actually doing, it is modifying the metadata for
an index. As part of this change, `remove` is also appended to the path
to be more explicit about its actions.
If the Rollover step would fail due to the next index in sequence
already existing, just skip to the next step instead of going to the
Error step.
This prevents spurious `ResourceAlreadyExistsException`s created by
simultaneous RolloverStep executions from causing ILM to error out
unnecessarily.
This commit removes the Joda time usage from ILM and the HLRC components of ILM.
It also fixes an issue where using the `?human=true` flag could have caused the
parser not to work. These millisecond fields now follow the standard we use
elsewhere in the code, with additional fields added iff the `human` flag is
specified.
This is a breaking change for ILM, but since ILM has not yet been released, no
compatibility shim is needed.
Previously, testRunStateChangePolicyWithNextStep asserted that the
ClusterState before and after running the steps were equal. The test
only passed due to a race condition: The latch would be triggered by the
step execution, but the cluster state update thread would continue
running before committing the change to the cluster state. This allowed
the test to read the old cluster state and pass the equality check about
99.99% of the time.
The test now waits for the new cluster state to be committed before
checking that it is _not_ equal to the old cluster state.
This commit does a few things
- moves ILM-specifc rest yaml tests into plugin/ilm/qa, and creates special
:plugin:ilm:qa:rest module to test them
- removes the with-security tests of the yaml tests since they are covered in
the rest tests now
- moves ChangePolicyforIndexIT into the qa/multi-node project since that test is
not currently running in main ilm since integTest is disabled
This PR renames the CRUD APIS for ILM
GET _ilm/<policy>, _ilm -> _ilm/policy/<policy>, _ilm/policy
PUT _ilm/<policy> -> _ilm/policy/<policy>
DELETE _ilm/<policy> -> _ilm/policy/<policy>
closes#34929.
Previously, if ClusterStateActionSteps or ClusterStateWaitSteps threw an
exception executing, the exception would only be caught and logged by
the generic ClusterStateUpdateTask machinery and the index would become
stuck on that step.
Now, exceptions thrown in these steps will be caught and the index will
be moved to the Error step.
The Move To Step API now checks to see if the target step is an
AsyncActionStep, and if so, runs it.
Previously, AsyncActionSteps would only be run when they are entered by
executing the previous step, so if an AsyncActionStep was entered via
the Move To Step API, ILM would never touch that index again.
ILM would return a resource-not-found exception when requesting policies
while the IndexLifecycleMetaData is not initialized. The behavior here
should not be as extreme since it is not the user's fault.
This commit changes the behavior so that it succeeds and returns no policies
when no policy names are explicitely specified, otherwise keep the same behavior
of throwing an exception
With the introduction of _ilm/stop and _ilm/start APIs, the
use cases where one would only target a select group
of indices to start/stop has been reduced. Since there is no
strong use-case for skipping specific indices, it is best to
remove this functionality and only adding if later desired, with the
hopes of keeping things more simple.
through randomization, there is a chance that the mutateInstance
for PolicyStatsTests does not actually mutate the original object.
This PR aims to fix this
* Adds usage data for ILM
* Adds tests for IndexLifecycleFeatureSetUsage and friends
* Adds tests for IndexLifecycleFeatureSet
* Fixes merge errors
* Add number of indices managed to usage stats
Also adds more tests
* Addresses Review comments
* Removes Set Policy API in favour of setting index.lifecycle.name
directly
* Reinstates matcher that will still be used
* Cleans up code after rebase
* Adds test to check changing policy with ndex settings works
* Fixes TimeseriesLifecycleActionsIT after API removal
* Fixes docs tests
* Fixes case on close where lifecycle service was never created
Since there's no transition into the "new" phase it wasn't set until the "hot"
phase, so now we initialize it when initializing the policy context.
Resolves#34277
Having integration tests separated from the unit tests in the qa
directory works much more smoothly with our testing infrastructure,
matches what other plugins do, and tests in a more "real" deployment
scenario by having all plugins installed.
This change adds the command RemoveIndexLifecyclePolicy to the HLRC. This uses the
new TimeRequest as a base class for RemoveIndexLifecyclePolicyRequest on the client side.
This fixes an issue where an incorrect expected next step is used when checking
to execute `AsyncActionStep`s after a cluster state step.
It fixes this scenario:
- `ExecuteStepsUpdateTask` executes a `ClusterStateWaitStep` or
`ClusterStateActionStep` successfully
- The next step is also a `ClusterStateWaitStep`, so it loops
- The `ClusterStateWaitStep` has a next stepkey (which gets set to the
`nextStepKey` in the code)
- The `ClusterStateWaitStep` fails the condition, meaning that it will have to
wait longer
- The `nextStepKey` is now incorrect though, because we did not advance the
index's step, and it's not `null` (which is another safe value if there is no
step after the `ClusterStateWaitStep`)
This fixes the problem by resetting the nextStepKey to null if the condition is
not met, since we are not going to advance the step metadata in this
case (thereby skipping the `maybeRunAsyncAction` invocation).
This commit also tightens up and enhances much of the ILM logging. A lot of
logging was missing the index name (making it hard to debug in the presence of
multiple indices) and a lot was using the wrong logging level (DEBUG is now
actually readable without being a wall of text).
Resolves#34297
- this adds an integration test that runs through a policy
with all the actions defined.
- adds a test specific to a policy having just a rollover action
- bumps the node count to 4
This commit changes the way that step execution flows. Rather than have any step
run when the cluster state changes or the periodic scheduler fires, this now
runs the different types of steps at different times.
`AsyncWaitStep` is run at a periodic manner, ie, every 10 minutes by default
`ClusterStateActionStep` and `ClusterStateWaitStep` are run every time the
cluster state changes.
`AsyncActionStep` is now run only after the cluster state has been transitioned
into a new step. This prevents these non-idempotent steps from running at the
same time. It addition to being run when transitioned into, this is also run
when a node is newly elected master (only if set as the current step) so that
master failover does not fail to run the step.
This also changes the `RolloverStep` from an `AsyncActionStep` to an
`AsyncWaitStep` so that it can run periodically.
Relates to #29823
ILM now only forces indices to become read only in the case of Shrink
and Force Merge actions, as these are most useful in cases where the
index is no longer being written to.
Using index settings for ILM state is fragile and exposes too much
information that doesn't need to be exposed. Using custom index metadata
is more resilient and allows more controlled access to internal
information.
As part of these changes, moves away from using defaults for ILM-related
values, in favor of using null values to clearly indicate that the value is not
present.
This moves away from caching a list of steps for a current phase, instead
rebuilding the necessary step from the phase JSON stored in the index's
metadata.
Relates to #29823
There was a listener that re-runs the policy with the new state when the cluster
state is processed by the `MoveToNextStepUpdateTask`. This removes this listener
as we will execute the policy through the `IndexLifecyleService` cluster state
listener.
It is useful to keep track of which version of a policy is currently
being executed by a specific index. For management purposes, it would
also be useful to know at which time the latest version was inserted
so that an audit trail is left for reconciling changes happening in ILM.
This removes `PhaseAfterStep` in favor of a new `PhaseCompleteStep`. This step
in only a marker that the `LifecyclePolicyRunner` needs to halt until the time
indicated for entering the next phase.
This also fixes a bug where phase times were encapsulated into the policy
instead of dynamically adjusting to policy changes.
Supersedes #33140, which it replaces
Relates to #29823
Since policies can be updated independent of execution plans for the current
phase being executed, it would be nice to know what the phase that is executing
looks like in JSON. This PR does just that, while also using that index setting
to recontruct the phase steps to execute (for consistency)
This brings the name in line with everywhere else and means that name
seen on the feature usage and `GET _xpack` APIs will match the plugin
name.
This change also removes `IndexLifcycle.NAME` since this was only used
to name the scheduler job and that can be done using
`XPackField.INDEX_LIFECYCLE` instead
Changes to the IndexLifecycleService were necessary since relying on
ClusterChangedEvents for a full picture of the cluster state's settings was
a mistake. It is not necessary that these events hold all settings, especially ones
that are set at node start-up.
Changes to main include:
- move poll interval updates to a SettingsUpdateConsumer
- move scheduler start/stop to a localMasterNodeListener
- keep triggerPolicies in clusterChanged
Changes to tests include:
- removal of some low-level state transition checks in the Service that no longer make sense
since the changes are unconditionally specified in the appropriate listeners
- add integration tests for poll-interval updates
- add integration test assertions for verifying scheduler is started up correctly
* Remove canSetPolicy, canUpdatePolicy and canRemovePolicy
Since we now store a pre-compiled list of steps for an index's phase in the
`PolicyStepsRegistry`, we no longer need to worry about updating policies as any
updates won't affect the current phase, and will only be picked up on phase
transitions.
This also removes the tests that test these methods
Relates to #29823
This is needed as with recent changes to master (see #32952), protocol
is no longer accessible from core, so these classes need to be
duplicated in both places.
This change fixes the shrink action so when the shrink is performed we
remove the single node allocation fromt eh shard allocation filtering
settings. Without this fix replicas cannot be allocated after we have
performed the shrink and we cannot make progress with the rest of the
shink aciton.
This change also fixes a bug in the explain API where the maste node
timeout was being set to null if it wasn't provided instead of using
its default value causing a NPE
If we are waiting on a condition to be met, and the reason
it is not completed is unchanged, we find ourselves updating
cluster state over and over again and kicking of the ILM listeners
to re-check. This is overkill and can generate way too many
cluster state updates
This is the final PR for copying over the necessary components for
clients to parse/render LifecyclePolicy. Changes include:
- move of named-x-content server objects away from client
- move validation into the client copy of LifecyclePolicy
- move LifecycleAction into an interface with `getName`
* Store phase steps for index in PolicyStepsRegistry
This changes the way that steps are retrieved from `PolicyStepsRegistry` to
store the steps on a per-index basis (in memory for now, though that will change
in subsequent PRs). These steps are rebuilt as the index changes phases.
This also fixes a bug where an action with the same phase and name was not being
considered changed (and thus updated) in the compiled steps list. These are now
correctly considered as "upsert" diffs.
Relates to #29823
As we migrate to a per-phase execution model, we need to prepare our cluster-state-step execution model to be aligned. It is the case that the final iteration into the next "currentStep" from the next phase would not be available in the registry yet. This change exits the execution loop early as to not jump into executing the next phase's steps before the registry is properly updated
It is useful to have a random TimeseriesLifecycleType-backed LifecyclePolicy
for testing. This PR exposes a helper method to create one and use it for serialization tests
in LifecyclePolicyTests
The qa tests with security haven't actually gone as far as testing security roles yet, so this is a start in the hopes of both bringing the tests into the ilm plugin
* Adds REST client support for PutOperationMode in ILM
* Corrects licence headers
* iter
* add request converter test
* Fixes tests
* Creates start and stop actions for controlling ILM operation
* Addresses review comments
Since replica counts and allocation rules are set separately, it is not always clear how many replicas are to be allocated in the allocate action. Moving the replicas action to occur at the same time as the allocate action, resolves this confusion that could end an undesired state. This means that the ReplicasAction is removed, and a new optional replicas parameter is added to AllocateAction.
This was originally set to a few seconds while prototyping things.
This interval is for the scheduled trigger of policies. Policies
have this extra trigger beyond just on cluster-state changes because
cluster-state changes may not be happeneing in a cluster for
whatever reason, and we need to continue making progress. Updating
this value to be larger is reasonable since not all operations
are expected to be completed in the span of seconds, but instead in
minutes and hours. 10 minutes is sane.
This commit does the following:
- renames index-lifecycle plugin to ilm
- modifies the endpoints to ilm instead of index_lifecycle
- drops _xpack from the endpoints
- drops a few duplicate endpoints
Gordon Brown
Armin Braun
Alpar Torok
Lee Hinman
Mark Vieira
David Kyle
Jason Tedor
Ryan Ernst
Yannick Welsch
Jake Landis
Martijn van Groningen
Ryan Ernst
Daniel Mitterdorfer
Christoph Büscher
Yogesh Gaikwad
Jay Modi
Luca Cavanna
Julie Tibshirani
Tal Levy
Tim Brooks
Alexander Reelsen
Nik Everett
Colin Goodheart-Smithe
Jack Conradson
Lee Hinman