Affix settings are useful to namespace a certain setting. Yet, affix settings
must be specialized for their concrete type which causes lot of code duplication.
This commit allows to reuse an existing setting with and affix setting as soon as
a concrete key is available.
This integrates the mocksocket jar with elasticsearch tests. Mocksocket wraps actions requiring SocketPermissions in doPrivilege blocks. This will eventually allow SocketPermissions to be assigned to the mocksocket jar opposed to the entire elasticsearch codebase.
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
As the translog evolves towards a full operations log as part of the
sequence numbers push, there is a need for the translog to be able to
represent operations for which a sequence number was assigned, but the
operation did not mutate the index. Examples of how this can arise are
operations that fail after the sequence number is assigned, and gaps in
this history that arise when an operation is assigned a sequence number
but the operation never completed (e.g., a node crash). It is important
that these operations appear in the history so that they can be
replicated and replayed during recovery as otherwise the history will be
incomplete and local checkpoints will not be able to advance. This
commit introduces a no-op to the translog to set the stage for these
efforts.
Relates #22291
The `UnicastZenPing` shows it's age and is the result of many small changes. The current state of affairs is confusing and is hard to reason about. This PR cleans it up (while following the same original intentions). Highlights of the changes are:
1) Clear 3 round flow - no interleaving of scheduling.
2) The previous implementation did a best effort attempt to wait for ongoing pings to be sent and completed. The pings were guaranteed to complete because each used the total ping duration as a timeout. This did make it hard to reason about the total ping duration and the flow of the code. All of this is removed now and ping should just complete within the given duration or not be counted (note that it was very handy for testing, but I move the needed sync logic to the test).
3) Because of (2) the pinging scheduling changed a bit, to give a chance for the last round to complete. We now ping at the beginning, 1/3 and 2/3 of the duration.
4) To offset for (3) a bit, incoming ping requests are now added to on going ping collections.
5) UnicastZenPing never establishes full blown connections (but does reuse them if there). Relates to #22120
6) Discovery host providers are only used once per pinging round. Closes#21739
7) Usage of the ability to open a connection without connecting to a node ( #22194 ) and shorter connection timeouts helps with connections piling up. Closes#19370
8) Beefed up testing and sped them up.
9) removed light profile from production code
Introduces `XContentParser#namedObject which works a little like
`StreamInput#readNamedWriteable`: on startup components register
parsers under names and a superclass. At runtime we look up the
parser and call it to parse the object.
Right now the parsers take a context object they use to help with
the parsing but I hope to be able to eliminate the need for this
context as most what it is used for at this point is to move
around parser registries which should be replaced by this method
eventually. I make no effort to do so in this PR because it is
big enough already. This is meant to the a start down a road that
allows us to remove classes like `QueryParseContext`,
`AggregatorParsers`, `IndicesQueriesRegistry`, and
`ParseFieldRegistry`.
The goal here is to reduce the amount of plumbing required to
allow parsing pluggable things. With this you don't have to pass
registries all over the place. Instead you must pass a super
registry to fewer places and use it to wrap the reader. This is
the same tradeoff that we use for NamedWriteable and it allows
much, much simpler binary serialization. We think we want that
same thing for xcontent serialization.
The only parsing actually converted to this method is parsing
`ScoreFunctions` inside of `FunctionScoreQuery`. I chose this
because it is relatively self contained.
We are currenlty checking that no deprecation warnings are emitted in our query tests. That can be moved to ESTestCase (disabled in ESIntegTestCase) as it allows us to easily catch where our tests use deprecated features and assert on the expected warnings.
With this commit, we introduce a cache to the geoip ingest processor.
The cache is enabled by default and caches the 1000 most recent items.
The cache size is controlled by the setting `ingest.geoip.cache_size`.
Closes#22074
In some cases, it might happen that the `_all` field gets a field type that is
not totally configured, and in particular lacks analyzers. This is due to the
fact that `AllFieldMapper.TypeParser.getDefault` uses `Defaults.FIELD_TYPE` as
a default field type, which does not have any analyzers configured since it
does not know about the default analyzers.
While I was fixing a documentation issue (#22007), I looked at the code and discovered that we actually never read what the user entered as a `readonly` parameter when he creates an azure repository.
So if someone sends:
```
PUT _snapshot/my_backup4
{
"type": "azure",
"settings": {
"account": "my_account2",
"location_mode": "primary_only",
"readonly": true
}
}
```
The repository is not actually defined as `readonly`.
It's caused by the fact we are always overwriting `readonly`setting based on `location_mode`.
If a user sets it to `primary_only`, `readonly` is forced to `false`.
If a user sets it to `primary_then_secondary`, `readonly` is forced to `false`.
If a user sets it to `secondary_only`, `readonly` is forced to `false`.
Note that with this change, a user can force a `secondary_only` repository to `readonly: false` which will lead him to an error later on when we check the repository as per definition in Azure, a secondary repository is not writable.
Another option could have been to detect this mismatch and throw an exception in that case. Note sure it is worth writing more code though.
Closes#22053.
Since the removal of local discovery of #https://github.com/elastic/elasticsearch/pull/20960 we rely on minimum master nodes to be set in our test cluster. The settings is automatically managed by the cluster (by default) but current management doesn't work with concurrent single node async starting. On the other hand, with `MockZenPing` and the `discovery.initial_state_timeout` set to `0s` node starting and joining is very fast making async starting an unneeded complexity. Test that still need async starting could, in theory, still do so themselves via background threads.
Note that this change also removes the usage of `INITIAL_STATE_TIMEOUT_SETTINGS` as the starting of nodes is done concurrently (but building them is sequential)
For the record, I also had to remove the geo-hash cell and geo-distance range
queries to make the code compile. These queries already throw an exception in
all cases with 5.x indices, so that does not hurt any more.
I also had to rename all 2.x bwc indices from `index-${version}` to
`unsupported-${version}` to make `OldIndexBackwardCompatibilityIT`
happy.
Set lucene version to 6.4.0-snapshot-ec38570 and update all the sha1s/license
Fix invalid combo after upgrade in query_string query. split_on_whitespace=false is disallowed if auto_generate_phrase_queries=true
Adapt the expectations of some tests to the new format of the Lucene explain output
Lucene 6.2 added index and query support for numeric ranges. This commit adds a new RangeFieldMapper for indexing numeric (int, long, float, double) and date ranges and creating appropriate range and term queries. The design is similar to NumericFieldMapper in that it uses a RangeType enumerator for implementing the logic specific to each type. The following range types are supported by this field mapper: int_range, float_range, long_range, double_range, date_range.
Lucene does not provide a DocValue field specific to RangeField types so the RangeFieldMapper implements a CustomRangeDocValuesField for handling doc value support.
When executing a Range query over a Range field, the RangeQueryBuilder has been enhanced to accept a new relation parameter for defining the type of query as one of: WITHIN, CONTAINS, INTERSECTS. This provides support for finding all ranges that are related to a specific range in a desired way. As with other spatial queries, DISJOINT can be achieved as a MUST_NOT of an INTERSECTS query.
Group, List and Affix settings generate a bogus diff that turns the actual
diff into a string containing a json structure for instance:
```
"action" : {
"search" : {
"remote" : {
"" : "{\"my_remote_cluster\":\"[::1]:60378\"}"
}
}
}
```
which make reading the setting impossible. This happens for instance
if a group or affix setting is rendered via `_cluster/settings?include_defaults=true`
This change fixes the issue as well as several minor issues with affix settings that
where not accepted as valid setting today.
Today we eagerly resolve unicast hosts. This means that if DNS changes,
we will never find the host at the new address. Moreover, a single host
failng to resolve causes startup to abort. This commit introduces lazy
resolution of unicast hosts. If a DNS entry changes, there is an
opportunity for the host to be discovered. Note that under the Java
security manager, there is a default positive cache of infinity for
resolved hosts; this means that if a user does want to operate in an
environment where DNS can change, they must adjust
networkaddress.cache.ttl in their security policy. And if a host fails
to resolve, we warn log the hostname but continue pinging other
configured hosts.
When doing DNS resolutions for unicast hostnames, we wait until the DNS
lookups timeout. This appears to be forty-five seconds on modern JVMs,
and it is not configurable. If we do these serially, the cluster can be
blocked during ping for a lengthy period of time. This commit introduces
doing the DNS lookups in parallel, and adds a user-configurable timeout
for these lookups.
Relates #21630
#20960 removed `LocalDiscovery` and we now use `ZenDiscovery` in all our tests. To keep cluster forming fast, we are using a `MockZenPing` implementation which uses static maps to return instant results making master election fast. Currently, we don't set `minimum_master_nodes` causing the occasional split brain when starting multiple nodes concurrently and their pinging is so fast that it misses the fact that one of the node has elected it self master. To solve this, `InternalTestCluster` is modified to behave like a true cluster and manage and set `minimum_master_nodes` correctly with every change to the number of nodes.
Tests that want to manage the settings themselves can opt out using a new `autoMinMasterNodes` parameter to the `ClusterScope` annotation.
Having `min_master_nodes` set means the started node may need to wait for other nodes to be started as well. To combat this, we set `discovery.initial_state_timeout` to `0` and wait for the cluster to form once all node have been started. Also, because a node may wait and ping while other nodes are started, `MockZenPing` is adapted to wait rather than busy-ping.
JDK9 removed pathname canonicalization when constructing FilePermission objects, which breaks some of the FilePermissions added by Elasticsearch. This commit adds the system property jdk.io.permissionsUseCanonicalPath which makes JDK9 behave like JDK8 w.r.t. FilePermission objects (see #21534).
This changes adds a test discovery (which internally uses the existing
mock zenping by default). Having the mock the test framework selects be a discovery
greatly simplifies discovery setup (no more weird callback to a Node
method).
JDK9 removed pathname canonicalization when constructing FilePermission objects, which breaks some of the FilePermissions added by
Elasticsearch. This commit adds the system property jdk.io.permissionsUseCanonicalPath which makes JDK9 behave like JDK8 w.r.t. FilePermissions (see
https://github.com/elastic/elasticsearch/issues/21534).
* master:
ShardActiveResponseHandler shouldn't hold to an entire cluster state
Ensures cleanup of temporary index-* generational blobs during snapshotting (#21469)
Remove (again) test uses of onModule (#21414)
[TEST] Add assertBusy when checking for pending operation counter after tests
Revert "Add trace logging when aquiring and releasing operation locks for replication requests"
Allows multiple patterns to be specified for index templates (#21009)
[TEST] fixes rebalance single shard check as it isn't guaranteed that a rebalance makes sense and the method only tests if rebalance is allowed
Document _reindex with random_score
* master: (516 commits)
Avoid angering Log4j in TransportNodesActionTests
Add trace logging when aquiring and releasing operation locks for replication requests
Fix handler name on message not fully read
Remove accidental import.
Improve log message in TransportNodesAction
Clean up of Script.
Update Joda Time to version 2.9.5 (#21468)
Remove unused ClusterService dependency from SearchPhaseController (#21421)
Remove max_local_storage_nodes from elasticsearch.yml (#21467)
Wait for all reindex subtasks before rethrottling
Correcting a typo-Maan to Man-in README.textile (#21466)
Fix InternalSearchHit#hasSource to return the proper boolean value (#21441)
Replace all index date-math examples with the URI encoded form
Fix typos (#21456)
Adapt ES_JVM_OPTIONS packaging test to ubuntu-1204
Add null check in InternalSearchHit#sourceRef to prevent NPE (#21431)
Add VirtualBox version check (#21370)
Export ES_JVM_OPTIONS for SysV init
Skip reindex rethrottle tests with workers
Make forbidden APIs be quieter about classpath warnings (#21443)
...
This change was reverted after it caused random test failures. This was
due to a copy/paste error in the original PR which caused the mock
version of ClusterInfoService to be used whenever the mock *ZenPing* was
used, and the real ClusterInfoService to be used when MockZenPing was
not used.
* Plugins: Convert custom discovery to pull based plugin
This change primarily moves registering custom Discovery implementations
to the pull based DiscoveryPlugin interface. It also keeps the cloud
based discovery plugins re-registering ZenDiscovery under their own name
in order to maintain backwards compatibility. However,
discovery.zen.hosts_provider is changed here to no longer fallback to
discovery.type. Instead, each plugin which previously relied on the
value of discovery.type now sets the hosts_provider to itself if
discovery.type is set to itself, along with a deprecation warning.
At one point in the past when moving out the rest tests from core to
their own subproject, we had multiple test classes which evenly split up
the tests to run. However, we simplified this and went back to a single
test runner to have better reproduceability in tests. This change
removes the remnants of that multiplexing support.
Currently the default S3 buffer size is 100MB, which can be a lot for small
heaps. This pull request updates the default to be 100MB for heaps that are
greater than 2GB and 5% of the heap size otherwise.
The `IndexService#newQueryShardContext()` method creates a QueryShardContext on
shard `0`, with a `null` reader and that uses `System.currentTimeMillis()` to
resolve `now`. This may hide bugs, since the shard id is sometimes used for
query parsing (it is used to salt random score generation in `function_score`),
passing a `null` reader disables query rewriting and for some use-cases, it is
simply not ok to rely on the current timestamp (eg. percolation). So this pull
request removes this method and instead requires that all call sites provide
these parameters explicitly.
Since Lucene 6.2. the UkrainianMorfologikAnalyzer is available through the
lucene-analyzers-morfologik jar. This change exposes it to be used as an
elasticsearch plugin.
Lucene 6.3 is expected to be released in the next weeks so it'd be good to give
it some integration testing. I had to upgrade randomized-testing too so that
both Lucene and Elasticsearch are on the same version.
Follow up for #21039.
We can revert the previous change and do that a bit smarter than it was.
Patch tested successfully manually on ec2 with 2 nodes with a configuration like:
```yml
discovery.type: ec2
network.host: ["_local_", "_site_", "_ec2_"]
cloud.aws.region: us-west-2
```
(cherry picked from commit fbbeded)
Backport of #21048 in master branch
This change moves providing UnicastHostsProvider for zen discovery to be
pull based, adding a getter in DiscoveryPlugin. A new setting is added,
discovery.zen.hosts_provider, to separate the discovery type from the
hosts provider for zen when it is selected. Unfortunately existing
plugins added ZenDiscovery with their own name in order to just provide
a hosts provider, so there are already many users setting the hosts
provider through discovery.type. This change also includes backcompat,
falling back to discovery.type when discovery.zen.hosts_provider is not
set.
Here is what is happening without this fix when you try to connect to ec2 APIs:
```
[2016-10-20T12:41:49,925][DEBUG][c.a.a.AWSCredentialsProviderChain] Unable to load credentials from EnvironmentVariableCredentialsProvider: Unable to load AWS credentials from environment variables (AWS_ACCESS_KEY_ID (or AWS_ACCESS_KEY) and AWS_SECRET_KEY (or AWS_SECRET_ACCESS_KEY))
[2016-10-20T12:41:49,926][DEBUG][c.a.a.AWSCredentialsProviderChain] Unable to load credentials from SystemPropertiesCredentialsProvider: Unable to load AWS credentials from Java system properties (aws.accessKeyId and aws.secretKey)
[2016-10-20T12:41:49,926][DEBUG][c.a.a.AWSCredentialsProviderChain] Unable to load credentials from com.amazonaws.auth.profile.ProfileCredentialsProvider@1ad14091: access denied ("java.io.FilePermission" "/home/ubuntu/.aws/credentials" "read")
[2016-10-20T12:41:49,927][DEBUG][c.a.i.EC2MetadataClient ] Connecting to EC2 instance metadata service at URL: http://169.254.169.254/latest/meta-data/iam/security-credentials/
[2016-10-20T12:41:49,951][DEBUG][c.a.i.EC2MetadataClient ] Connecting to EC2 instance metadata service at URL: http://169.254.169.254/latest/meta-data/iam/security-credentials/discovery-tests
[2016-10-20T12:41:49,965][DEBUG][c.a.a.AWSCredentialsProviderChain] Unable to load credentials from InstanceProfileCredentialsProvider: Unable to parse Json String.
[2016-10-20T12:41:49,966][INFO ][o.e.d.e.AwsEc2UnicastHostsProvider] [dJfktmE] Exception while retrieving instance list from AWS API: Unable to load AWS credentials from any provider in the chain
[2016-10-20T12:41:49,967][DEBUG][o.e.d.e.AwsEc2UnicastHostsProvider] [dJfktmE] Full exception:
com.amazonaws.AmazonClientException: Unable to load AWS credentials from any provider in the chain
at com.amazonaws.auth.AWSCredentialsProviderChain.getCredentials(AWSCredentialsProviderChain.java:131) ~[aws-java-sdk-core-1.10.69.jar:?]
at com.amazonaws.services.ec2.AmazonEC2Client.invoke(AmazonEC2Client.java:11117) ~[aws-java-sdk-ec2-1.10.69.jar:?]
at com.amazonaws.services.ec2.AmazonEC2Client.describeInstances(AmazonEC2Client.java:5403) ~[aws-java-sdk-ec2-1.10.69.jar:?]
at org.elasticsearch.discovery.ec2.AwsEc2UnicastHostsProvider.fetchDynamicNodes(AwsEc2UnicastHostsProvider.java:116) [discovery-ec2-5.0.0.jar:5.0.0]
at org.elasticsearch.discovery.ec2.AwsEc2UnicastHostsProvider$DiscoNodesCache.refresh(AwsEc2UnicastHostsProvider.java:234) [discovery-ec2-5.0.0.jar:5.0.0]
at org.elasticsearch.discovery.ec2.AwsEc2UnicastHostsProvider$DiscoNodesCache.refresh(AwsEc2UnicastHostsProvider.java:219) [discovery-ec2-5.0.0.jar:5.0.0]
at org.elasticsearch.common.util.SingleObjectCache.getOrRefresh(SingleObjectCache.java:54) [elasticsearch-5.0.0.jar:5.0.0]
at org.elasticsearch.discovery.ec2.AwsEc2UnicastHostsProvider.buildDynamicNodes(AwsEc2UnicastHostsProvider.java:102) [discovery-ec2-5.0.0.jar:5.0.0]
at org.elasticsearch.discovery.zen.ping.unicast.UnicastZenPing.sendPings(UnicastZenPing.java:358) [elasticsearch-5.0.0.jar:5.0.0]
at org.elasticsearch.discovery.zen.ping.unicast.UnicastZenPing$1.doRun(UnicastZenPing.java:272) [elasticsearch-5.0.0.jar:5.0.0]
at org.elasticsearch.common.util.concurrent.ThreadContext$ContextPreservingAbstractRunnable.doRun(ThreadContext.java:504) [elasticsearch-5.0.0.jar:5.0.0]
at org.elasticsearch.common.util.concurrent.AbstractRunnable.run(AbstractRunnable.java:37) [elasticsearch-5.0.0.jar:5.0.0]
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [?:1.8.0_91]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [?:1.8.0_91]
at java.lang.Thread.run(Thread.java:745) [?:1.8.0_91]
```
For whatever reason, it can not parse what is coming back from http://169.254.169.254/latest/meta-data/iam/security-credentials/discovery-tests.
But, if you wrap the code within an `AccessController.doPrivileged()` call, then it works perfectly.
Closes#21039.
(cherry picked from commit abfdc70)
* Move all zen discovery classes into o.e.discovery.zen
This collapses sub packages of zen into zen. These all had just a couple
classes each, and there is really no reason to have the subpackages.
* fix checkstyle
`LocalDiscovery` is a discovery implementation that uses static in memory maps to keep track of current live nodes. This is used extensively in our tests in order to speed up cluster formation (i.e., shortcut the 3 second ping period used by `ZenDiscovery` by default). This is sad as that mean that most of the test run using a different discovery semantics than what is used in production. Instead of replacing the entire discovery logic, we can use a similar approach to only shortcut the pinging components.
This commit fixes an issue with the configuration for the AwsSdkMetrics
logger; the issue is that the logging configuration had used underscores
instead of periods for the settings key (the perils of lenient settings
parsing).
Relates #20313
In 2.x, the S3 repository accepted a `/` (forward slash) to start
the repositories.s3.base_path, and it used a different string splitting
method that removed the forward slash from the base path, so there
were no issues.
In 5.x, we removed this custom string splitting method in favor of
the JDK's string splitting method, which preserved the leading `/`.
The AWS SDK does not like the leading `/` in the key path after the
bucket name, and so it could not find any objects in the S3 repository.
This commit fixes the issue by removing the leading `/` if it exists
and adding a deprecation notice that leading `/` will not be supported
in the future in S3 repository's base_path.
UpdateHelper, MetaDataIndexUpgradeService, and some recovery
stuff.
Move ClusterSettings to nullable ctor parameter of TransportService
so it isn't forgotten.
This change proposes the removal of all non-tcp transport implementations. The
mock transport can be used by default to run tests instead of local transport that has
roughly the same performance compared to TCP or at least not noticeably slower.
This is a master only change, deprecation notice in 5.x will be committed as a
separate change.
Today when parsing a request, Elasticsearch silently ignores incorrect
(including parameters with typos) or unused parameters. This is bad as
it leads to requests having unintended behavior (e.g., if a user hits
the _analyze API and misspell the "tokenizer" then Elasticsearch will
just use the standard analyzer, completely against intentions).
This commit removes lenient URL parameter parsing. The strategy is
simple: when a request is handled and a parameter is touched, we mark it
as such. Before the request is actually executed, we check to ensure
that all parameters have been consumed. If there are remaining
parameters yet to be consumed, we fail the request with a list of the
unconsumed parameters. An exception has to be made for parameters that
format the response (as opposed to controlling the request); for this
case, handlers are able to provide a list of parameters that should be
excluded from tripping the unconsumed parameters check because those
parameters will be used in formatting the response.
Additionally, some inconsistencies between the parameters in the code
and in the docs are corrected.
Relates #20722
* master: (1199 commits)
[DOCS] Remove non-valid link to mapping migration document
Revert "Default `include_in_all` for numeric-like types to false"
test: add a test with ipv6 address
docs: clearify that both ip4 and ip6 addresses are supported
Include complex settings in settings requests
Add production warning for pre-release builds
Clean up confusing error message on unhandled endpoint
[TEST] Increase logging level in testDelayShards()
change health from string to enum (#20661)
Provide error message when plugin id is missing
Document that sliced scroll works for reindex
Make reindex-from-remote ignore unknown fields
Remove NoopGatewayAllocator in favor of a more realistic mock (#20637)
Remove Marvel character reference from guide
Fix documentation for setting Java I/O temp dir
Update client benchmarks to log4j2
Changes the API of GatewayAllocator#applyStartedShards and (#20642)
Removes FailedRerouteAllocation and StartedRerouteAllocation
IndexRoutingTable.initializeEmpty shouldn't override supplied primary RecoverySource (#20638)
Smoke tester: Adjust to latest changes (#20611)
...
We were swallowing the original exception when creating a client with bad credentials.
So even in `TRACE` log level, nothing useful were coming out of it.
With this commit, it now prints:
```
[2016-09-27 15:54:13,118][ERROR][cloud.azure.storage ] [node_s0] can not create azure storage client: Storage Key is not a valid base64 encoded string.
```
Closes#20633.
Backport of #20669 for master branch (6.0)
Today we hold on to all possible tokenizers, tokenfilters etc. when we create
an index service on a node. This was mainly done to allow the `_analyze` API to
directly access all these primitive. We fixed this in #19827 and can now get rid of
the AnalysisService entirely and replace it with a simple map like class. This
ensures we don't create a gazillion long living objects that are entirely useless since
they are never used in most of the indices. Also those objects might consume a considerable
amount of memory since they might load stopwords or synonyms etc.
Closes#19828
Adds an integration test for the file-based discovery plugin
to test the plugin operates correctly and uses the hosts
configured in `unicast_hosts.txt` with a real cluster
Closes#20459
This commit removes `ByteSizeValue`'s methods that are duplicated (ex: `mbFrac()` and `getMbFrac()`) in order to only keep the `getN` form.
It also renames `mb()` -> `getMb()`, `kb()` -> `getKB()` in order to be more coherent with the `ByteSizeUnit` method names.
* Build: Remove old maven deploy support
This change removes the old maven deploy that we have in parallel to
maven-publish, and makes maven-publish fully work with publishing to
maven local. Using `gradle publishToMavenLocal` should be used to
publish to .m2.
Note that there is an unfortunate hack that means for
zip artifacts we must first create/publish a dummy pom file, and then
follow that with the real pom file. It would be nice to have the pom
file contains packaging=zip, but maven central then requires sources and
javadocs. But our zips are really just attached artifacts, so we already
set the packaging type to pom for our zip files. This change just works
around a limitation of the underlying maven publishing library which
silently skips attached artifacts when the packaging type is set to pom.
relates #20164closes#20375
* Remove unnecessary extra spacing
TransportService is such a central part of the core server, replacing
it's implementation is risky and can cause serious issues. This change removes the ability to
plug in TransportService but allows registering a TransportInterceptor that enables
plugins to intercept requests on both the sender and the receiver ends. This is a commonly used
and overwritten functionality but encapsulates the custom code in a contained manner.
update geoip to not include null-valued results from database
Originally, the plugin would still insert all the requested fields, but
assign null to each one. This fixes that by not writing the fields at
all. Makes for a better experience when the null fields conflict with
the typical geo_point field mapping.
This commit introduces a new plugin for file-based unicast hosts
discovery. This allows specifying the unicast hosts participating
in discovery through a `unicast_hosts.txt` file located in the
`config/discovery-file` directory. The plugin will use the hosts
specified in this file as the set of hosts to ping during discovery.
The format of the `unicast_hosts.txt` file is to have one host/port
entry per line. The hosts file is read and parsed every time
discovery makes ping requests, thus a new version of the file that
is published to the config directory will automatically be picked
up.
Closes#20323
This change replaces the fields parameter with stored_fields when it makes sense.
This is dictated by the renaming we made in #18943 for the search API.
The following list of endpoint has been changed to use `stored_fields` instead of `fields`:
* get
* mget
* explain
The documentation and the rest API spec has been updated to cope with the changes for the following APIs:
* delete_by_query
* get
* mget
* explain
The `fields` parameter has been deprecated for the following APIs (it is replaced by _source filtering):
* update: the fields are extracted from the _source directly.
* bulk: the fields parameter is used but fields are extracted from the source directly so it is allowed to have non-stored fields.
Some APIs still have the `fields` parameter for various reasons:
* cat.fielddata: the fields paramaters relates to the fielddata fields that should be printed.
* indices.clear_cache: used to indicate which fielddata fields should be cleared.
* indices.get_field_mapping: used to filter fields in the mapping.
* indices.stats: get stats on fields (stored or not stored).
* termvectors: fields are retrieved from the stored fields if possible and extracted from the _source otherwise.
* mtermvectors:
* nodes.stats: the fields parameter is used to concatenate completion_fields and fielddata_fields so it's not related to stored_fields at all.
Fixes#20155
Because of security permissions that we do not grant to the AWS SDK (for
use in discovery-ec2 and repository-s3 plugins), certain calls in the
AWS SDK will lead to security exceptions that are logged at the warning
level. These warnings are noise and we should suppress them. This commit
adds plugin log configurations for discovery-ec2 and repository-s3 to
ship with default Log4j 2 configurations that suppress these log
warnings.
Relates #20313
This commit modifies the call sites that allocate a parameterized
message to use a supplier so that allocations are avoided unless the log
level is fine enough to emit the corresponding log message.
This makes GET operations more consistent with `_search` operations which expect
`(stored_)fields` to work on stored fields and source filtering to work on the
`_source` field. This is now possible thanks to the fact that GET operations
do not read from the translog anymore (#20102) and also allows to get rid of
`FieldMapper#isGenerated`.
The `_termvectors` API (and thus more_like_this too) was relying on the fact
that GET operations would extract fields from either stored fields or the source
so the logic to do this that used to exist in `ShardGetService` has been moved
to `TermVectorsService`. It would be nice that term vectors do not rely on this,
but this does not seem to be a low hanging fruit.
Squashes all the subpackages of `org.elasticsearch.rest.action` down to
the following:
* `o.e.rest.action.admin` - Administrative actions
* `o.e.rest.action.cat` - Actions that make tables for `grep`ing
* `o.e.rest.action.document` - Actions that act on documents
* `o.e.rest.action.ingest` - Actions that act on ingest pipelines
* `o.e.rest.action.search` - Actions that search
I'm tempted to merge `search` into `document` but the `document`
package feels fairly complete as is and `Suggest` isn't actually always
about documents either....
I'm also tempted to merge `ingest` into `admin.cluster` because the
latter contains the actions for dealing with stored scripts.
I've moved the `o.e.rest.action.support` into `o.e.rest.action`.
I've also added `package-info.java`s to all packges in `o.e.rest`. I
figure if the package is too small to deserve a `package-info.java` file
then it is too small to deserve to be a package....
Also fixes checkstyle in all moved classes.
Fixes two issues:
1. lang-javascript doesn't support `executable` with a `null` `vars`
parameters. The parameter is quite nullable.
2. reindex didn't support script engines who's `unwrap` method wasn't
a noop. This didn't come up for lang-groovy or lang-painless because
both of those `unwrap`s were noops. lang-javascript copys all maps that
it `unwrap`s.
This adds fairly low level unit tests for these fixes but dosen't add
an integration test that makes sure that reindex and lang-javascript
play well together. That'd make backporting this difficult and would
add a fairly significant amount of time to the build for a fairly rare
interaction. Hopefully the unit tests will be enough.
I also reduced the visibility of a couple classes and renamed/consolidated some
test classes for consistency, eg. removing the `Simple` prefix or using the
`<Type>FieldMapperTests` convention for testing field mappers.
When compiling many dynamically changing scripts, parameterized
scripts (<https://www.elastic.co/guide/en/elasticsearch/reference/master/modules-scripting-using.html#prefer-params>)
should be preferred. This enforces a limit to the number of scripts that
can be compiled within a minute. A new dynamic setting is added -
`script.max_compilations_per_minute`, which defaults to 15.
If more dynamic scripts are sent, a user will get the following
exception:
```json
{
"error" : {
"root_cause" : [
{
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
],
"type" : "search_phase_execution_exception",
"reason" : "all shards failed",
"phase" : "query",
"grouped" : true,
"failed_shards" : [
{
"shard" : 0,
"index" : "i",
"node" : "a5V1eXcZRYiIk8lecjZ4Jw",
"reason" : {
"type" : "general_script_exception",
"reason" : "Failed to compile inline script [\"aaaaaaaaaaaaaaaa\"] using lang [painless]",
"caused_by" : {
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
}
}
],
"caused_by" : {
"type" : "general_script_exception",
"reason" : "Failed to compile inline script [\"aaaaaaaaaaaaaaaa\"] using lang [painless]",
"caused_by" : {
"type" : "circuit_breaking_exception",
"reason" : "[script] Too many dynamic script compilations within one minute, max: [15/min]; please use on-disk, indexed, or scripts with parameters instead",
"bytes_wanted" : 0,
"bytes_limit" : 0
}
}
},
"status" : 500
}
```
This also fixes a bug in `ScriptService` where requests being executed
concurrently on a single node could cause a script to be compiled
multiple times (many in the case of a powerful node with many shards)
due to no synchronization between checking the cache and compiling the
script. There is now synchronization so that a script being compiled
will only be compiled once regardless of the number of concurrent
searches on a node.
Relates to #19396
This commit cleans up indices in a snapshot repository when all
snapshots containing the index are all deleted. Previously, empty
indices folders would lay around after all snapshots containing
them were deleted.
conform with the requirements of the writeBlob method by
throwing a FileAlreadyExistsException if attempting to write
to a blob that already exists. This change means implementations
of BlobContainer should never overwrite blobs - to overwrite a
blob, it must first be deleted and then can be written again.
Closes#15579
In an effort to reduce the number of tiny packages we have in the
code base this moves all the files that were in subdirectories of
`org.elasticsearch.rest.action.admin.cluster` into
`org.elasticsearch.rest.action.admin.cluster`.
Also fixes line length in these packages.
While I was working on #18703, I discovered a bad behavior when people don't provide AWS key/secret as part as their `elasticsearch.yml` but rely on SysProps or env. variables...
In [`InternalAwsS3Service#getClient(...)`](d4366f8493/plugins/repository-s3/src/main/java/org/elasticsearch/cloud/aws/InternalAwsS3Service.java (L76-L141)), we have:
```java
Tuple<String, String> clientDescriptor = new Tuple<>(endpoint, account);
AmazonS3Client client = clients.get(clientDescriptor);
```
But if people don't provide credentials, `account` is `null`.
Even if it actually could work, I think that we should use the `AWSCredentialsProvider` we create later on and extract from it the `account` (AWS KEY actually) and then use it as the second value of the tuple.
Closes#19557.
This makes it obvious that these tests are for running the client yaml
suites. Now that there are other ways of running tests using the REST
client against a running cluster we can't go on calling the shared
client yaml tests "REST tests". They are rest tests, but they aren't
**the** rest tests.
This adds a header that looks like `Location: /test/test/1` to the
response for the index/create/update API. The requirement for the header
comes from https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.htmlhttps://tools.ietf.org/html/rfc7231#section-7.1.2 claims that relative
URIs are OK. So we use an absolute path which should resolve to the
appropriate location.
Closes#19079
This makes large changes to our rest test infrastructure, allowing us
to write junit tests that test a running cluster via the rest client.
It does this by splitting ESRestTestCase into two classes:
* ESRestTestCase is the superclass of all tests that use the rest client
to interact with a running cluster.
* ESClientYamlSuiteTestCase is the superclass of all tests that use the
rest client to run the yaml tests. These tests are shared across all
official clients, thus the `ClientYamlSuite` part of the name.
In #15950#15080#16084 we added the support of TimeOut for Requests with a default client`setTimeoutIntervalInMs`.
So we can remove this useless todo which was added for only one method.
Closes#18617.
Azure and Google cloud blob containers, as the APIs for both return
a 404 in the case of a missing object, which we already handle through
a NoSuchFileFoundException.
Follow up for #18662 and #18690.
* For consistency, we rename method parameters and use `key` and `secret` instead of `account` and `key`.
* We add some tests to check that settings are correctly applied.
* Tests revealed that some checks are bad like for #18662.
Add test and fix issue for getting the right S3 endpoint
Test when Repository, Repositories or global settings are defined
But ignore testAWSCredentialsWithSystemProviders test
Add tests for AWS Client Configuration
Fix NPE when no region is set
We used to transform region="" to region=null but it's not needed anymore and would actually cause NPE from now.
Follow up for #18662
We add some tests to check that settings are correctly applied.
Tests revealed that some checks were missing.
But we ignore `testAWSCredentialsWithSystemProviders` test for now.
Added BlobContainer tests for HDFS storage
and caught a bug at the same time in which
deleteBlob was not raising an IOException
when the blobName did not exist.
Added BlobContainer tests for Azure storage
and caught a bug at the same time in which
deleteBlob was not raising an IOException
when the blobName did not exist.
Follow up for https://github.com/elastic/elasticsearch/pull/17784#discussion_r64575845
Today we are registering repository settings when `S3RepositoryPlugin` starts:
```java
settingsModule.registerSetting(S3Repository.Repository.KEY_SETTING);
settingsModule.registerSetting(S3Repository.Repository.SECRET_SETTING);
settingsModule.registerSetting(S3Repository.Repository.BUCKET_SETTING);
settingsModule.registerSetting(S3Repository.Repository.ENDPOINT_SETTING);
settingsModule.registerSetting(S3Repository.Repository.PROTOCOL_SETTING);
settingsModule.registerSetting(S3Repository.Repository.REGION_SETTING);
settingsModule.registerSetting(S3Repository.Repository.SERVER_SIDE_ENCRYPTION_SETTING);
settingsModule.registerSetting(S3Repository.Repository.BUFFER_SIZE_SETTING);
settingsModule.registerSetting(S3Repository.Repository.MAX_RETRIES_SETTING);
settingsModule.registerSetting(S3Repository.Repository.CHUNK_SIZE_SETTING);
settingsModule.registerSetting(S3Repository.Repository.COMPRESS_SETTING);
settingsModule.registerSetting(S3Repository.Repository.STORAGE_CLASS_SETTING);
settingsModule.registerSetting(S3Repository.Repository.CANNED_ACL_SETTING);
settingsModule.registerSetting(S3Repository.Repository.BASE_PATH_SETTING);
```
We don't need to register those settings as they are repository level settings and not node level settings.
Closes#18945.
creation in the REST tests, as we no longer need it due
to index creation now waiting for active shard copies
before returning (by default, it waits for the primary of
each shard, which is the same as ensuring yellow health).
Relates #19450
Also introduced a `Processor.Parameters` class that is holder for several services processors rely on,
the IngestPlugin#getProcessors(...) method has been changed to accept `Processor.Parameters` instead
of each service seperately.
This commit renames the Netty 3 transport module from transport-netty to
transport-netty3. This is to make room for a Netty 4 transport module,
transport-netty4.
Relates #19439
Today `node.mode` and `node.local` serve almost the same purpose, they
are a shortcut for `discovery.type` and `transport.type`. If `node.local: true`
or `node.mode: local` is set elasticsearch will start in _local_ mode which means
only nodes within the same JVM are discovered and a non-network based transport
is used. The _local_ mode it only really used in tests or if nodes are embedded.
For both, embedding and tests explicit configuration via `discovery.type` and `transport.type`
should be preferred.
This change removes all the usage of these settings and by-default doesn't
configure a default transport implemenation since netty is now a module. Yet, to make
the user expericence flawless, plugins or modules can set a `http.type.default` and
`transport.type.default`. Plugins set this via `PluginService#additionalSettings()`
which enforces _set-once_ which prevents node startup if set multiple times. This means
that our distributions will just startup with netty transport since it's packaged as a
module unless `transport.type` or `http.transport.type` is explicitly set.
This change also found a bunch of bugs since several NamedWriteables were not registered if a
transport client is used. Now that we don't rely on the `node.mode` leniency which is inherited
instead of using explicit settings, `TransportClient` uses `AssertingLocalTransport` which detects these problems since it serializes all messages.
Closes#16234
Some tests still start http implicitly or miss configuring the transport clients correctly.
This commit fixes all remaining tests and adds a depdenceny to `transport-netty` from
`qa/smoke-test-http` and `modules/reindex` since they need an http server running on the nodes.
This also moves all required permissions for netty into it's module and out of core.
This change adds a createComponents() method to Plugin implementations
which they can use to return already constructed componenents/services.
Eventually this should be just services ("components" don't really do
anything), but for now it allows any object so that preconstructed
instances by plugins can still be bound to guice. Over time we should
add basic services as arguments to this method, but for now I have left
it empty so as to not presume what is a necessary service.
The DiscoveryNodeService exists to register CustomNodeAttributes which
plugins can add. This is not necessary, since plugins can already add
additional attributes, and use the node attributes prefix.
This change removes the DiscoveryNodeService, and converts the only
consumer, the ec2 discovery plugin, to add the ec2 availability zone
in additionalSettings().
Repository plugins currently use a lot of custom classes like
RepositoryName and RepositorySettings in order to use guice to construct
repository implementations. But repositories now only really need their
settings to be constructed. Anything else they need (eg a cloud client)
can be constructed within the plugin, instead of via guice.
This change makes repository plugins use the new pull model. It removes
guice from the construction of Repository objects (no more child
injectors) and also from all repository plugins.
The api for snapshot/restore was split up between two interfaces,
Repository and IndexShardRepository. There was also complex
initialization and injection between the two. However, there is always a
one to one relationship between the two.
This change moves the IndexShardRepository api into Repository, as well
as updates the API so as not to require any services to be injected for
sublcasses.
* master: (192 commits)
[TEST] Fix rare OBOE in AbstractBytesReferenceTestCase
Reindex from remote
Rename writeThrowable to writeException
Start transport client round-robin randomly
Reword Refresh API reference (#19270)
Update fielddata.asciidoc
Fix stored_fields message
Add missing footer notes in mapper size docs
Remote BucketStreams
Add doc values support to the _size field in the mapper-size plugin
Bump version to 5.0.0-alpha5.
Update refresh.asciidoc
Update shrink-index.asciidoc
Change Debian repository for Vagrant debian-8 box
[TEST] fix test to account for internal empyt reference optimization
Upgrade to netty 3.10.6.Final (#19235)
[TEST] fix histogram test when extended bounds overlaps data
Remove redundant modifier
Simplify TcpTransport interface by reducing send code to a single send method (#19223)
Fix style violation in InstallPluginCommand.java
...
This change activates the doc_values on the _size field for indices created after 5.0.0-alpha4.
It also adds a note in the breaking changes that explain the situation and how to get around it.
Closes#18334
Today throughout the codebase, catch throwable is used with reckless
abandon. This is dangerous because the throwable could be a fatal
virtual machine error resulting from an internal error in the JVM, or an
out of memory error or a stack overflow error that leaves the virtual
machine in an unstable and unpredictable state. This commit removes
catch throwable from the codebase and removes the temptation to use it
by modifying listener APIs to receive instances of Exception instead of
the top-level Throwable.
Relates #19231
Rename `fields` to `stored_fields` and add `docvalue_fields`
`stored_fields` parameter will no longer try to retrieve fields from the _source but will only return stored fields.
`fields` will throw an exception if the user uses it.
Add `docvalue_fields` as an adjunct to `fielddata_fields` which is deprecated. `docvalue_fields` will try to load the value from the docvalue and fallback to fielddata cache if docvalues are not enabled on that field.
Closes#18943
The only reason for LifecycleComponent taking a generic type was so that
it could return that type on its start and stop methods. However, this
chaining has no practical necessity. Instead, start and stop can be
void, and a whole bunch of confusing generics disappear.
Before, a repository would maintain an index file (named 'index') per
repository, that contained the current snapshots in the repository.
This file was not atomically written, so repositories had to depend on
listing the blobs in the repository to determine what the current
snapshots are, and only rely on the index file if the repository does
not support the listBlobs operation. This could cause an incorrect view
of the current snapshots in the repository if any prior snapshot delete
operations failed to delete snapshot metadata files.
This commit introduces the atomic writing of the index file, and because
atomic writes are not guaranteed if the file already exists, we write to
a generational index file (index-N, where N is the current generation).
We also maintain an index-latest file that contains the current
generation, for those repositories that cannot list blobs.
Closes#19002
Relates #18156
BytesReference should be a really simple interface, yet it has a gazillion
ways to achieve the same this. Methods like `#hasArray`, `#toBytesArray`, `#copyBytesArray`
`#toBytesRef` `#bytes` are all really duplicates. This change simplifies the interface
dramatically and makes implementations of it much simpler. All array access has been removed
and is streamlined through a single `#toBytesRef` method. Utility methods to materialize a
compact byte array has been added too for convenience.
Repository-S3 needs a special permission because of problems in AmazonS3Client: when no region is set on a AmazonS3Client instance, the AWS SDK loads all known partitions from a JSON file and uses a Jackson's ObjectMapper for that: this one, in version 2.5.3 with the default binding options, tries to suppress access checks of ctor/field/method and thus requires this special permission. AWS must be fixed to uses Jackson correctly and have the correct modifiers on binded classes.
This must be fixed in aws sdk (see https://github.com/aws/aws-sdk-java/issues/766) but in the meanwhile we have no choice.
closes#18539
Raise IOException on deleteBlob if the blob doesn't exist
This commit raises an IOException on BlobContainer#deleteBlob
if the blob does not exist, in conformance with the BlobContainer
interface contract. Each implementation of BlobContainer now
conforms to this contract (file system, S3, Azure, HDFS). This
commit also contains blob container tests for each of the
repository implementations.
Closes#18530
As discussed at https://github.com/elastic/elasticsearch-cloud-azure/issues/91#issuecomment-229113595, we know that the current `discovery-azure` plugin only works with Azure Classic VMs / Services (which is somehow Legacy now).
The proposal here is to rename `discovery-azure` to `discovery-azure-classic` in case some users are using it.
And deprecate it for 5.0.
Closes#19144.
The factory for ingest processor is generic, but that is only for the
return type of the create mehtod. However, the actual consumer of the
factories only cares about Processor, so generics are not needed.
This change removes the generic type from the factory. It also removes
AbstractProcessorFactory which only existed in order pull the optional
tag from config. This functionality is moved to the caller of the
factories in ConfigurationUtil, and the create method now takes the tag.
This allows the covariant return of the implementation to work with
tests not needing casts.
When GCE region is empty we get back from the API something like:
```
{
"id": "dummy"
}
```
instead of:
```
{
"id": "dummy",
"items":[ ]
}
```
This generates a NPE when we aggregate all the lists into a single one.
Closes#16967.
Previously all rest handlers would take Client in their injected ctor.
However, it was only to hold the client around for runtime. Instead,
this can be done just once in the HttpService which handles rest
requests, and passed along through the handleRequest method. It also
should always be a NodeClient, and other types of Clients (eg a
TransportClient) would not work anyways (and some handlers can be
simplified in follow ups like reindex by taking NodeClient).
This change allows Plugin implementions to implement Closeable when they
have resources that should be released. As a first example of how this
can be used, I switched over ingest plugins, which just had the geoip
processor. The ingest framework had chains of closeable to support this,
which is now removed.
The discovery-plugin has been broken since 2.x because the code was not compliant with the security manager and because plugins have been refactored.
closes#18637, #15630
Since the Settings infrastructure has been improved, a group setting must be registered by the repository-azure plugin to allow settings like "cloud.azure.storage.my_account.account" to be coherent with Azure plugin documentation.
Instead of plugins calling `registerTokenizer` to extend the analyzer
they now instead have to implement `AnalysisPlugin` and override
`getTokenizer`. This lines up extending plugins in with extending
scripts. This allows `AnalysisModule` to construct the `AnalysisRegistry`
immediately as part of its constructor which makes testing anslysis
much simpler.
This also moves the default analysis configuration into `AnalysisModule`
which is how search is setup.
Like `ScriptModule`, `AnalysisModule` no longer extends `AbstractModule`.
Instead it is only responsible for building `AnslysisRegistry`. We still
bind `AnalysisRegistry` but we only do so in `Node`. This is means it
is available at module construction time so we slowly remove the need to
bind it in guice.
Related to #18945 and to this 35d3bdab84 (commitcomment-17914150)
In GCS Repository plugin we defined a `service_account` setting which is defined as `Property.Filtered`.
It's not needed as it's only a path to a file.
Closes#18946
* master: (416 commits)
docs: removed obsolete information, percolator queries are not longer loaded into jvm heap memory.
Upgrade JNA to 4.2.2 and remove optionality
[TEST] Increase timeouts for Rest test client (#19042)
Update migrate_5_0.asciidoc
Add ThreadLeakLingering option to Rest client tests
Add a MultiTermAwareComponent marker interface to analysis factories. #19028
Attempt at fixing IndexStatsIT.testFilterCacheStats.
Fix docs build.
Move templates out of the Search API, into lang-mustache module
revert - Inline reroute with process of node join/master election (#18938)
Build valid slices in SearchSourceBuilderTests
Docs: Convert aggs/misc to CONSOLE
Docs: migration notes for _timestamp and _ttl
Group client projects under :client
[TEST] Add client-test module and make client tests use randomized runner directly
Move upgrade test to upgrade from version 2.3.3
Tasks: Add completed to the mapping
Fail to start if plugin tries broken onModule
Remove duplicated read byte array methods
Rename `fields` to `stored_fields` and add `docvalue_fields`
...
This is the same as what Lucene does for its analysis factories, and we hawe
tests that make sure that the elasticsearch factories are in sync with
Lucene's. This is a first step to move forward on #9978 and #18064.
`stored_fields` parameter will no longer try to retrieve fields from the _source but will only return stored fields.
`fields` will throw an exception if the user uses it.
Add `docvalue_fields` as an adjunct to `fielddata_fields` which is deprecated. `docvalue_fields` will try to load the value from the docvalue and fallback to fielddata cache if docvalues are not enabled on that field.
Closes#18943
This changes adds a MapperPlugin interface which allows pull style
retrieval of mappers and metadata mappers added by plugins. For now, I
have kept the MapperRegistry, but this should be removed in the future
as it is just a silly container for 2 maps which could themselves be
passed around.
We pretended to be able to ackt like a different version node for so long it's
time to be honest and remove this ability. It's just confusing and where needed
and tested we should build dedicated extension points.
This change removes some unnecessary dependencies from ClusterService
and cleans up ClusterName creation. ClusterService is now not created
by guice anymore.
Today we have a push model for registering basically anything. All our extension points
are defined on modules which we pass in to plugins. This is harder to maintain and adds
unnecessary dependencies on the modules itself. This change moves towards a pull model
where the plugin offers a getter kind of method to get the extensions. This will also
help in the future if we need to pass dependencies to the extension points which can
easily be defined on the method as arguments if a pull model is used.
Registering a script engine or native scripts still uses Guice today
and is much more complicated than needed. This change moves to a pull
based model where script plugins have to implement a dedicated interface
`ScriptPlugin` and defines simple getter returning instances rather than
classes.
In 2.0 we added plugin descriptors which require defining a name and
description for the plugin. However, we still have name() and
description() which must be overriden from the Plugin class. This still
exists for classpath plugins. But classpath plugins are mainly for
tests, and even then, referring to classpath plugins with their class is
a better idea. This change removes name() and description(), replacing
the name for classpath plugins with the full class name.
The database files have been doubled in size compared to the previous files being used.
For this reason the database files are now gzip compressed, which required using
`GZIPInputStream` when loading database files.
* master: (51 commits)
Switch QueryBuilders to new MatchPhraseQueryBuilder
Added method to allow creation of new methods on-the-fly.
more cleanups
Remove cluster name from data path
Remove explicit parallel new GC flag
rehash the docvalues in DocValuesSliceQuery using BitMixer.mix instead of the naive Long.hashCode.
switch FunctionRef over to methodhandles
ingest: Move processors from core to ingest-common module.
Fix some typos (#18746)
Fix ut
convert FunctionRef/Def usage to methodhandles.
Add the ability to partition a scroll in multiple slices. API:
use painless types in FunctionRef
Update ingest-node.asciidoc
compute functional interface stuff in Definition
Use method name in bootstrap check might fork test
Make checkstyle happy (add Lookup import, line length)
Don't hide LambdaConversionException and behave like real javac compiled code when a conversion fails. This works anyways, because fallback is allowed to throw any Throwable
Pass through the lookup given by invokedynamic to the LambdaMetaFactory. Without it real lambdas won't work, as their implementations are private to script class
checkstyle have your upper L
...
Folded grok processor into ingest-common module.
The rest tests have been moved to ingest-common module as well, because these tests don't run in the rest-api-spec module but in the distribution:integ-test-zip module
and adding a test plugin there felt just wrong to me. I think this is ok. I left a tiny ingest rest test behind in that tests with an empty pipeline.
Removed messy tests, these tests were already covered in the rest tests
Added ingest test plugin in test infra so that each module testing integration with ingest doesn't need write its own plugin
Moved reindex ingest tests to qa module
Closes#18490
This commit refactors the handling of thread pool settings so that the
individual settings can be registered rather than registering the top
level group. With this refactoring, individual plugins must now register
their own settings for custom thread pools that they need, but a
dedicated API is provided for this in the thread pool module. This
commit also renames the prefix on the thread pool settings from
"threadpool" to "thread_pool". This enables a hard break on the settings
so that:
- some of the settings can be given more sensible names (e.g., the max
number of threads in a scaling thread pool is now named "max" instead
of "size")
- change the soft limit on the number of threads in the bulk and
indexing thread pools to a hard limit
- the settings names for custom plugins for thread pools can be
prefixed (e.g., "xpack.watcher.thread_pool.size")
- remove dynamic thread pool settings
Relates #18674
Simon Willnauer
animageofmine
Tim B
Adrien Grand
Daniel Mitterdorfer
Igor Motov
Nik Everett
Jason Tedor
David Pilato
Nic Palmer
Boaz Leskes
Tal Levy
javanna
Daniel Mitterdorfer
Alexander Kazakov
Jim Ferenczi
Nicholas Knize
Ryan Ernst
Yannick Welsch
Jack Conradson
Christoph Büscher
Jun Ohtani
Tanguy Leroux
Ali Beyad
Alexander Reelsen
Martijn van Groningen
Sarwar Bhuiyan
Chris Earle
Mike McCandless
Lee Hinman
gfyoung
Simon Willnauer
Christoph Wurm
Christoph Wurm
Areek Zillur