In case of an in-progress snapshot this endpoint was broken because
it tried to execute repository operations in the callback on a
transport thread which is not allowed (only generic or snapshot
pool are allowed here).
This commit namespaces the existing processors setting under the "node"
namespace. In doing so, we deprecate the existing processors setting in
favor of node.processors.
Since #45136, we use soft-deletes instead of translog in peer recovery.
There's no need to retain extra translog to increase a chance of
operation-based recoveries. This commit ignores the translog retention
policy if soft-deletes is enabled so we can discard translog more
quickly.
Backport of #45473
Relates #45136
Today, when rolling a new translog generation, we block all write
threads until a new generation is created. This choice is perfectly
fine except in a highly concurrent environment with the translog
async setting. We can reduce the blocking time by pre-sync the
current generation without writeLock before rolling. The new step
would fsync most of the data of the current generation without
blocking write threads.
Close#45371
Follow up on #32806.
The system property es.http.cname_in_publish_address is deprecated
starting from 7.0.0 and deprecation warning should be added if the
property is specified.
This PR will go to 7.x and master.
Follow-up PR to remove es.http.cname_in_publish_address property
completely will go to the master.
(cherry picked from commit a5ceca7715818f47ec87dd5f17f8812c584b592b)
* There is no point in listing out every shard over and over when the `index-N` blob in the shard contains a list of all the files
* Rebuilding the `index-N` from the `snap-${uuid}.dat` blobs does not provide any material benefit. It only would in the corner case of a corrupted `index-N` but otherwise uncorrupted blobs since we neither check the correctness of the content of all segment blobs nor do we do a similar recovery at the root of the repository.
* Also, at least in version `6.x` we only mark a shard snapshot as successful after writing out the updated `index-N` blob so all snapshots that would work with `7.x` and newer must have correct `index-N` blobs
=> Removed the rebuilding of the `index-N` content from `snap-${uuid}.dat` files and moved to only listing `index-N` when taking a snapshot instead of listing all files
=> Removed check of file existence against physical blob listing
=> Kept full listing on the delete side to retain full cleanup of blobs that aren't referenced by the `index-N`
This PR introduces a mechanism to cancel a search task when its corresponding connection gets closed. That would relief users from having to manually deal with tasks and cancel them if needed. Especially the process of finding the task_id requires calling get tasks which needs to call every node in the cluster.
The implementation is based on associating each http channel with its currently running search task, and cancelling the task when the previously registered close listener gets called.
Today we can release a Store using CancellableThreads. If we are holding
the last reference, then we will verify the node lock before deleting
the store. Checking node lock performs some I/O on FileChannel. If the
current thread is interrupted, then the channel will be closed and the
node lock will also be invalid.
Closes#45237
* Add is_write_index column to cat.aliases (#44772)
Aliases have had the option to set `is_write_index` since 6.4,
but the cat.aliases action was never updated.
* correct version bounds to 7.4
Most of our CLI tools use the Terminal class, which previously did not provide methods for writing to standard output. When all output goes to standard out, there are two basic problems. First, errors and warnings are "swallowed" in pipelines, making it hard for a user to know when something's gone wrong. Second, errors and warnings are intermingled with legitimate output, making it difficult to pass the results of interactive scripts to other tools.
This commit adds a second set of print commands to Terminal for printing to standard error, with errorPrint corresponding to print and errorPrintln corresponding to println. This leaves it to developers to decide which output should go where. It also adjusts existing commands to send errors and warnings to stderr.
Usage is printed to standard output when it's correctly requested (e.g., bin/elasticsearch-keystore --help) but goes to standard error when a command is invoked incorrectly (e.g. bin/elasticsearch-keystore list-with-a-typo | sort).
* Repository Cleanup Endpoint (#43900)
* Snapshot cleanup functionality via transport/REST endpoint.
* Added all the infrastructure for this with the HLRC and node client
* Made use of it in tests and resolved relevant TODO
* Added new `Custom` CS element that tracks the cleanup logic.
Kept it similar to the delete and in progress classes and gave it
some (for now) redundant way of handling multiple cleanups but only allow one
* Use the exact same mechanism used by deletes to have the combination
of CS entry and increment in repository state ID provide some
concurrency safety (the initial approach of just an entry in the CS
was not enough, we must increment the repository state ID to be safe
against concurrent modifications, otherwise we run the risk of "cleaning up"
blobs that just got created without noticing)
* Isolated the logic to the transport action class as much as I could.
It's not ideal, but we don't need to keep any state and do the same
for other repository operations
(like getting the detailed snapshot shard status)
This change adds a new option called user_dictionary_rules to
Kuromoji's tokenizer. It can be used to set additional tokenization rules
to the Japanese tokenizer directly in the settings (instead of using a file).
This commit also adds a check that no rules are duplicated since this is not allowed
in the UserDictionary.
Closes#25343
Backports PR #45737:
Similar to PR #45030 integration test testDontCacheScripts() was moved to unit test AvgAggregatorTests#testDontCacheScripts.
AvgIT class was removed.
If the background refresh is running, but not finished yet then the
document might not be visible to the next search. Thus, if
scheduledRefresh returns false, we need to wait until the background
refresh is done.
Closes#45571
`OsProbe` fetches cgroup data from the filesystem, and has asserts that
check for missing values. This PR changes most of these asserts into
runtime checks, since at least one user has reported an NPE where
a piece of cgroup data was missing.
Backport of #45606 to 7.x.
If a scheduled task of an AbstractAsyncTask starts after it was closed,
then isScheduledOrRunning can remain true forever although no task is
running or scheduled.
Closes#45576
The elasticsearch keystore was originally backed by a PKCS#12 keystore, which had several limitations. To overcome some of these limitations in encoding, the setting names existing within the keystore were limited to lowercase alphanumberic (with underscore). Now that the keystore is backed by an encrypted blob, this restriction is no longer relevant. This commit relaxes that restriction by allowing uppercase ascii characters as well.
closes#43835
Changes the order of parameters in Geometries from lat, lon to lon, lat
and moves all Geometry classes are moved to the
org.elasticsearch.geomtery package.
Backport of #45332Closes#45048
This commit adds an explicit error message when a create index request
contains a settings key that is not a json object. Prior to this change
the user would be given a ClassCastException with no explanation of what
went wrong.
closes#45126
The current idiom is to have the InternalAggregator find all the
buckets sharing the same key, put them in a list, get the first bucket
and ask that bucket to reduce all the buckets (including itself).
This a somewhat confusing workflow, and feels like the aggregator should
be reducing the buckets (since the aggregator owns the buckets), rather
than asking one bucket to do all the reductions.
This commit basically moves the `Bucket.reduce()` method to the
InternalAgg and renames it `reduceBucket()`. It also moves the
`createBucket()` (or equivalent) method from the bucket to the
InternalAgg as well.
This commit adds CNAME reporting for transport.publish_address same way
it's done for http.publish_address.
Relates #32806
Relates #39970
(cherry picked from commit e0a2558a4c3a6b6fbfc6cd17ed34a6f6ef7b15a9)
* Since we're buffering network reads to the heap and then deserializing them it makes no sense to buffer a message that is 90% of the heap size since we couldn't deserialize it anyway
* I think `30%` is a more reasonable guess here given that we can reasonably assume that the deserialized message will be larger than the serialized message itself and processing it will take additional heap as well
When a persistent task attempts to register an allocated task locally,
this creates the Task object and starts tracking it locally. If there
is a failure while initializing the task, this is handled by a catch
and subsequent error handling (canceling, unregistering, etc).
But if the task fails to be created because an exception is thrown
in the tasks ctor, this is uncaught and fails the cluster update
thread. The ramification is that a persistent task remains in the
cluster state, but is unable to create the allocated task, and the
exception prevents other tasks "after" the poisoned task from starting
too.
Because the allocated task is never created, the cancellation tools
are not able to remove the persistent task and it is stuck as a
zombie in the CS.
This commit adds exception handling around the task creation,
and attempts to notify the master if there is a failure (so the
persistent task can be removed). Even if this notification fails,
the exception handling means the rest of the uninitialized tasks
can proceed as normal.
* Painless generates a ton of duplicate strings and empty `Hashmap` instances wrapped as unmodifiable
* This change brings down the static footprint of Painless on an idle node by 20MB (after running the PMC benchmark against said node)
* Since we were looking into ways of optimizing for smaller node sizes I think this is a worthwhile optimization
Moves methods added in #44213 and uses them to configure the port range
for `ExternalTestCluster` too.
These were still using `9300-9400` ( teh default ) and running into
races.
* Fixing this for two reasons:
1. Why not verify that the seed we wrote is actually there when we can
2. The AWS S3 SDK started to log a bunch of WARN messages about not fully reading the stream now that we started to abuse the read blob as an `exists` check after removing that method from the blob container
* Introduce Spatial Plugin (#44389)
Introduce a skeleton Spatial plugin that holds new licensed features coming to
Geo/Spatial land!
* [GEO] Refactor DeprecatedParameters in AbstractGeometryFieldMapper (#44923)
Refactor DeprecatedParameters specific to legacy geo_shape out of
AbstractGeometryFieldMapper.TypeParser#parse.
* [SPATIAL] New ShapeFieldMapper for indexing cartesian geometries (#44980)
Add a new ShapeFieldMapper to the xpack spatial module for
indexing arbitrary cartesian geometries using a new field type called shape.
The indexing approach leverages lucene's new XYShape field type which is
backed by BKD in the same manner as LatLonShape but without the WGS84
latitude longitude restrictions. The new field mapper builds on and
extends the refactoring effort in AbstractGeometryFieldMapper and accepts
shapes in either GeoJSON or WKT format (both of which support non geospatial
geometries).
Tests are provided in the ShapeFieldMapperTest class in the same manner
as GeoShapeFieldMapperTests and LegacyGeoShapeFieldMapperTests.
Documentation for how to use the new field type and what parameters are
accepted is included. The QueryBuilder for searching indexed shapes is
provided in a separate commit.
* [SPATIAL] New ShapeQueryBuilder for querying indexed cartesian geometry (#45108)
Add a new ShapeQueryBuilder to the xpack spatial module for
querying arbitrary Cartesian geometries indexed using the new shape field
type.
The query builder extends AbstractGeometryQueryBuilder and leverages the
ShapeQueryProcessor added in the previous field mapper commit.
Tests are provided in ShapeQueryTests in the same manner as
GeoShapeQueryTests and docs are updated to explain how the query works.
* It's in the title, follow up to #45233
* Flatten more listeners into `StepListener`
* Remove duplication from repo and index bootstrap and asserting that the steps execute successfully
* If `counter.onResult` throws an exception we might leak a transport task because the failure is not handled as a phase failure (instead it bubbles up in the transport service eventually hitting the `onFailure` callback again and couting down the `counter` twice).
Co-authored-by: Jim Ferenczi <jim.ferenczi@elastic.co>
Currently, when adding a new mapping, we attempt to parse + merge it before
checking whether its top-level document type matches the existing type. So when
a user attempts to introduce a new mapping type, we may give a confusing error
message around merging instead of complaining that it's not possible to add
more than one type ("Rejecting mapping update to [my-index] as the final
mapping would have more than 1 type...").
This PR moves the type validation to the start of
`MetaDataMappingService#applyRequest` so that we make sure the type matches
before performing any mapper merging.
We already partially addressed this issue in #29316, but the tests there
focused on `MapperService` and did not catch this problem with end-to-end
mapping updates.
Addresses #43012.
We accidentally introduced this bug when adding a typeless version of the
rollover request. The bug is not present if include_type_name is set to true.
The previous hasProcessors method would validate if a processor was
present within a pipeline, but would not return the contents of the
processors. This does not allow a consumer to inspect the processor for
specific metadata. The method now returns the list of processors based
on the class of the processor passed in.
Because auto-date-histo can perform multiple reductions while
merging buckets, we need to ensure that the intermediate reductions
are done with a `finalReduce` set to false to prevent Pipeline aggs
from generating their output.
Once all the buckets have been merged and the output is stable,
a mostly-noop reduction can be performed which will allow pipelines
to generate their output.
This commit makes sure that mapping parameters to `CreateIndex` and
`PutIndexTemplate` are keyed by the type name.
`IndexCreationTask` expects mappings to be keyed by the type name.
It asserts this for template mappings but not for the mappings in the request.
The `CreateIndexRequest` and `RestCreateIndexAction` mostly make it sure
that the mapping is keyed by a type name, but not always.
When building the create-index request outside of the REST handler, there are
a few methods to set the mapping for the request. Some of them add the type
name some of them do not.
For example, `CreateIndexRequest#mapping(String type, Map<String, ?> source)`
adds the type name, but
`CreateIndexRequest#mapping(String type, XContentBuilder source)` does not.
This PR asserts the type name in the request mapping inside `IndexCreationTask`
and makes all `CreateIndexRequest#mapping` methods add the type name.
testShouldFlushAfterPeerRecovery was added #28350 to make sure the
flushing loop triggered by afterWriteOperation eventually terminates.
This test relies on the fact that we call afterWriteOperation after
making changes in translog. In #44756, we roll a new generation in
RecoveryTarget#finalizeRecovery but do not call afterWriteOperation.
Relates #28350
Relates #45073
Today, if an operation-based peer recovery occurs, we won't trim
translog but leave it as is. Some unacknowledged operations existing in
translog of that replica might suddenly reappear when it gets promoted.
With this change, we ensure trimming translog above the starting
sequence number of phase 2. This change can allow us to read translog
forward.
* Follow up to #44949
* Stop using a special code path for multi-line JSON and instead handle its detection like that of other XContent types when creating the request
* Only leave a single path that holds a reference to the full REST request
* In the next step we can move the copying of request content to happen before the actual request handling and make it conditional on the handler in question to stop copying bulk requests as suggested in #44564
* Reduces complicated callback relations in `testSuccessfulSnapshotAndRestore` to flat steps of sequential actions
* Will refactor the other tests in this suit as a follow up
* This format certainly makes it easier to create more complicated tests that involve multiple subsequent snapshots as it would allow adding loops