This change simplifies how the rest test runner finds test files and
removes all leniency. Previously multiple prefixes and suffixes would
be tried, and tests could exist inside or outside of the classpath,
although outside of the classpath never quite worked. Now only classpath
tests are supported, and only one resource prefix is supported,
`/rest-api-spec/tests`.
closes#20240
We want to upgrade to Lucene 7 ahead of time in order to be able to check whether it causes any trouble to Elasticsearch before Lucene 7.0 gets released. From a user perspective, the main benefit of this upgrade is the enhanced support for sparse fields, whose resource consumption is now function of the number of docs that have a value rather than the total number of docs in the index.
Some notes about the change:
- it includes the deprecation of the `disable_coord` parameter of the `bool` and `common_terms` queries: Lucene has removed support for coord factors
- it includes the deprecation of the `index.similarity.base` expert setting, since it was only useful to configure coords and query norms, which have both been removed
- two tests have been marked with `@AwaitsFix` because of #23966, which we intend to address after the merge
In Elasticsearch 5.3.0 a bug was introduced in the merging of default
settings when the target setting existed as an array. When this bug
concerns path.data and default.path.data, we ended up in a situation
where the paths specified in both settings would be used to write index
data. Since our packaging sets default.path.data, users that configure
multiple data paths via an array and use the packaging are subject to
having shards land in paths in default.path.data when that is very
likely not what they intended.
This commit is an attempt to rectify this situation. If path.data and
default.path.data are configured, we check for the presence of indices
there. If we find any, we log messages explaining the situation and fail
the node.
Relates #24099
Some systems like GCE rely on a plaintext file containing credentials.
Rather than extract the information out of that credentials file and
store each peace individually in the keystore, it is cleaner to just
store the entire file.
This commit adds support to the keystore wrapper for secure file
settings. These are settings that contain an entire file that would
normally be stored on the local filesystem. Retrieving the file returns
an input stream to the file contents. This also adds a `add-file`
command to the keystore cli.
In order to support both strings and files as values for settings, the
metadata format of the keystore has also been updated (with backcompat)
to keep a map of setting name to type.
This commit adds support for replacing a stashed value within a header of a REST test. This is
useful for requests that may want to use a value previously obtained within a header.
We had a couple of unfortunate field name collisions in our CI, where the json duplicate check tripped. Increasing the minimum length of randomly generated field names should decrease the chance of this issue happening again.
This change adds secure settings for access/secret keys and proxy
username/password to ec2 discovery. It adds the new settings with the
prefix `discovery.ec2`, copies other relevant ec2 client settings to the
same prefix, and deprecates all other settings (`cloud.aws.*` and
`cloud.aws.ec2.*`). Note that this is simpler than the client configs
in repository-s3 because discovery is only initialized once for the
entire node, so there is no reason to complicate the configuration with
the ability to have multiple sets of client settings.
relates #22475
This test was sporadically failing for the following reason:
- 4 nodes (nodes 0, 1, 2, and 3) running with `minimum_master_nodes` set to 3
- we stop 2 nodes (node 0 and 3)
- wait for cluster block to be in place on all nodes
- start 2 nodes (node 4 and node 5) and do a `prepareHealth().setWaitForNodes("4")`
- then do a search request
The search request runs into the `ClusterBlockException` as the `prepareHealth().setWaitForNodes("4")` check succeeds on a cluster state that has
nodes 1, 2, 3, and 4, i.e., only one of the two new nodes has joined the cluster and only one of the two dead nodes was removed by the master
(removing the dead nodes only happens after there are again `minimum_master_nodes` nodes in the cluster).
This commit fixes the issue by reusing a method from InternalTestCluster that checks that the right nodes have rejoined the cluster.
ESTestCase has methods to shuffle xContent keys given a builder or a parser. Shuffling wasn't actually doing what was expected but rather reordering the keys in their natural ordering, hence the output was always the same at every run. Corrected that and added tests, also fixed a couple of tests that were affected by this fix.
When executing an index operation on the primary shard,
`TransportShardBulkAction` first parses the document, sees if there are any
mapping updates that needs to be applied, and then updates the mapping on the
master node. It then re-parses the document to make sure that the mappings have
been applied and propagated.
This adds a check that skips the second parsing of the document in the event
there was not a mapping update applied in the first case.
Fixes a performance regression introduced in #23665
This commit renames the random ASCII helper methods in ESTestCase. This
is because this method ultimately uses the random ASCII methods from
randomized runner, but these methods actually only produce random
strings generated from [a-zA-Z].
Relates #23886
the test reduce the wait for initial cluster state to 0, causing multiple nodes to be start while elections are going on. This means there is a chance of a split election which shouldn't cause the test to time out.
This commit adds a single node discovery type. With this discovery type,
a node will elect itself as master and never form a cluster with another
node.
Relates #23595
It starts nodes in any order and thus it disabled the wait for first cluster state at node start up time
the later is required for the auto management logic.
Closes#23728
The method Boolean#getBoolean is dangerous. It is too easy to mistakenly
invoke this method thinking that it is parsing a string as a
boolean. However, what it actually does is get a system property with
the specified string, and then attempts to use usual crappy boolean
parsing in the JDK to parse that system property as boolean with
complete leniency (it parses every input value into either true or
false); that is, this method amounts to invoking
Boolean#parseBoolean(String) on the result of
System#getProperty(String). Boo. This commit bans usage of this method.
Relates #23864
This commit changes the listener passed to sendMessage from a Runnable
to a ActionListener.
This change also removes IOException from the sendMessage signature.
That signature is misleading as it allows implementers to assume an
exception will be thrown in case of failure. That does not happen due
to Netty's async nature.
When executing an update request, the request timeout is not transferred
to the index/delete request executed on behalf of the update
request. This leads to update requests not timing out when they should
(e.g., if not all shards are available when the request specifies
wait_for_shards=all with a small timeout). This commit causes the
index/delete requests to honor the update request timeout.
Relates #23825
After the removal of the joda time hack we used to have, we can cleanup
the codebase handling in security, jarhell and plugins to be more picky
about uniqueness. This was originally in #18959 which was never merged.
closes#18959
Search took time uses an absolute clock to measure elapsed time, and
then tries to deal with the complexities of using an absolute clock for
this purpose. Instead, we should use a high-precision monotonic relative
clock that is designed exactly for measuring elapsed time. This commit
modifies the search infrastructure to use a relative clock for measuring
took time, but still provides an absolute clock for the components of
search that require a real clock (e.g., index name expression
resolution, etc.).
Relates #23662
Currently the task manager is tied to the transport and can only create tasks based on TransportRequests. This commit enables task manager to support tasks created by non-transport services such as the persistent tasks service.
Throw error when skip or do sections are malformed, such as they don't start with the proper token (START_OBJECT). That signals bad indentation, which would be ignored otherwise. Thanks (or due to) our pull parsing code, we were still able to properly parse the sections, yet other runners weren't able to.
Closes#21980
* [TEST] fix indentation in matrix_stats yaml tests
* [TEST] fix indentation in painless yaml test
* [TEST] fix indentation in analysis yaml tests
* [TEST] fix indentation in generated docs yaml tests
* [TEST] fix indentation in multi_cluster_search yaml tests
Today when resetting the deprecation logger after a test is torn down,
we attach a new thread context to the deprecation logger. This thread
context is never cleared and we are left with a thread context attached
to the deprecation logger for every test method that ran in the same
JVM. This commit adds a flag when resetting the deprecation logger to
not attach a new thread context when the test is being torn down.
Relates #23441
This commit fixes the date format in warning headers. There is some
confusion around whether or not RFC 1123 requires two-digit
days. However, the warning header specification very clearly relies on a
format that requires two-digit days. This commit removes the usage of
RFC 1123 date/time format from Java 8, which allows for one-digit days,
in favor of a format that forces two-digit days (it's otherwise
identical to RFC 1123 format, it is just fixed width).
Relates #23418
This commit adds a convenience method for simultaneously asserting
settings deprecations and other warnings and fixes some tests where
setting deprecations and general warnings were present.
Previously, cluster.routing.allocation.same_shard.host was not a dynamic
setting and could not be updated after startup. This commit changes the
behavior to allow the setting to be dynamically updatable. The
documentation already states that the setting is dynamic so no
documentation changes are required.
Closes#22992
The warning header used by Elasticsearch for delivering deprecation
warnings has a specific format (RFC 7234, section 5.5). The format
specifies that the warning header should be of the form
warn-code warn-agent warn-text [warn-date]
Here, the warn-code is a three-digit code which communicates various
meanings. The warn-agent is a string used to identify the source of the
warning (either a host:port combination, or some other identifier). The
warn-text is quoted string which conveys the semantic meaning of the
warning. The warn-date is an optional quoted date that can be in a few
different formats.
This commit corrects the warning header within Elasticsearch to follow
this specification. We use the warn-code 299 which means a
"miscellaneous persistent warning." For the warn-agent, we use the
version of Elasticsearch that produced the warning. The warn-text is
unchanged from what we deliver today, but is wrapped in quotes as
specified (this is important as a problem that exists today is that
multiple warnings can not be split by comma to obtain the individual
warnings as the warnings might themselves contain commas). For the
warn-date, we use the RFC 1123 format.
Relates #23275
This allows to set content-type together with the body itself. At the moment it is always json, but this change allows makes it easier to randomize it later
Console.readText may return null in certain cases. This commit fixes a
bug in Terminal.promptYesNo which assumed a non-null return value. It
also adds a test for this, and modifies mock terminal to be able to
handle null input values.
In #23253 we added an the ability to incrementally reduce search results.
This change exposes the parameter to control the batch since and therefore
the memory consumption of a large search request.
Today all query results are buffered up until we received responses of
all shards. This can hold on to a significant amount of memory if the number of
shards is large. This commit adds a first step towards incrementally reducing
aggregations results if a, per search request, configurable amount of responses
are received. If enough query results have been received and buffered all so-far
received aggregation responses will be reduced and released to be GCed.
This commit cleans up some parsing tests added from the High Level Rest Client: IndexResponseTests, DeleteResponseTests, UpdateResponseTests, BulkItemResponseTests.
These tests are now more uniform with the others test-from-to-XContent tests we have, they now shuffle the XContent fields before parsing, the asserting method for parsed objects does not used a Map<String, Object> anymore, and buggy equals/hasCode methods in ShardInfo and ShardInfo.Failure have been removed.
This commit enforces the requirement of Content-Type for the REST layer and removes the deprecated methods in transport
requests and their usages.
While doing this, it turns out that there are many places where *Entity classes are used from the apache http client
libraries and many of these usages did not specify the content type. The methods that do not specify a content type
explicitly have been added to forbidden apis to prevent more of these from entering our code base.
Relates #19388
With #22977, network disruption also disconnects nodes from the transport service. That has the side effect that when the disruption is healed, the disconnected node stay disconnected until the `NodeConnectionsService` restores the connection. This can take too long for the tests. This PR adds logic to the cluster healing to restore connections immediately.
See https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+master+multijob-unix-compatibility/os=debian/611/console for an example failure.
When nested objects are present in the mappings, many queries get deoptimized
due to the need to exclude documents that are not in the right space. For
instance, a filter is applied to all queries that prevents them from matching
non-root documents (`+*:* -_type:__*`). Moreover, a filter is applied to all
child queries of `nested` queries in order to make sure that the child query
only matches child documents (`_type:__nested_path`), which is required by
`ToParentBlockJoinQuery` (the Lucene query behing Elasticsearch's `nested`
queries).
These additional filters slow down `nested` queries. In 1.7-, the cost was
somehow amortized by the fact that we cached filters very aggressively. However,
this has proven to be a significant source of slow downs since 2.0 for users
of `nested` mappings and queries, see #20797.
This change makes the filtering a bit smarter. For instance if the query is a
`match_all` query, then we need to exclude nested docs. However, if the query
is `foo: bar` then it may only match root documents since `foo` is a top-level
field, so no additional filtering is required.
Another improvement is to use a `FILTER` clause on all types rather than a
`MUST_NOT` clause on all nested paths when possible since `FILTER` clauses
are more efficient.
Here are some examples of queries and how they get rewritten:
```
"match_all": {}
```
This query gets rewritten to `ConstantScore(+*:* -_type:__*)` on master and
`ConstantScore(_type:AutomatonQuery {\norg.apache.lucene.util.automaton.Automaton@4371da44})`
with this change. The automaton is the complement of `_type:__*` so it matches
the same documents, but is faster since it is now a positive clause. Simplistic
performance testing on a 10M index where each root document has 5 nested
documents on average gave a latency of 420ms on master and 90ms with this change
applied.
```
"term": {
"foo": {
"value": "0"
}
}
```
This query is rewritten to `+foo:0 #(ConstantScore(+*:* -_type:__*))^0.0` on
master and `foo:0` with this change: we do not need to filter nested docs out
since the query cannot match nested docs. While doing performance testing in
the same conditions as above, response times went from 250ms to 50ms.
```
"nested": {
"path": "nested",
"query": {
"term": {
"nested.foo": {
"value": "0"
}
}
}
}
```
This query is rewritten to
`+ToParentBlockJoinQuery (+nested.foo:0 #_type:__nested) #(ConstantScore(+*:* -_type:__*))^0.0`
on master and `ToParentBlockJoinQuery (nested.foo:0)` with this change. The
top-level filter (`-_type:__*`) could be removed since `nested` queries only
match documents of the parent space, as well as the child filter
(`#_type:__nested`) since the child query may only match nested docs since the
`nested` object has both `include_in_parent` and `include_in_root` set to
`false`. While doing performance testing in the same conditions as above,
response times went from 850ms to 270ms.
I encountered several cases of duplicate field names when generating random
fields using the RandomObjects helper. This leads to invalid json in some tests,
so increasing the minimum field name length to four to make this less likely to
happen.
When Netty decodes a bad HTTP request, it marks the decoder result on
the HTTP request as a failure, and reroutes the request to GET
/bad-request. This either leads to puzzling responses when a bad request
is sent to Elasticsearch (if an index named "bad-request" does not exist
then it produces an index not found exception and otherwise responds
with the index settings for the index named "bad-request"). This commit
addresses this by inspecting the decoder result on the HTTP request and
dispatching the request to a bad request handler preserving the initial
cause of the bad request and providing an error message to the client.
Relates #23153
This commit adds a new method to the TransportChannel that provides access to the version of the
remote node that the response is being sent on and that the request came from. This is helpful
for serialization of data attached as headers.
The traces callback is only called after responses are set. This can lead to concurrent issues where the trace is notified of previously sent responses if it was added after the response was sent (enabling further execution of the test) but before the tracer call backs are called.
EvillPeerRecoveryIT checks scenario where recovery is happening while there are on going indexing operation that already have been assigned a seq# . This is fairly hard to achieve and the test goes through a couple of hoops via the plugin infra to achieve that. This PR extends the unit tests infra to allow for those hoops to happen in unit tests. This allows the test to be moved to RecoveryDuringReplicationTests
Relates to #22484
We have a bunch of interfaces that have only a single implementation
for 6 years now. These interfaces are pretty useless from a SW development
perspective and only add unnecessary abstractions. They also require
lots of casting in many places where we expect that there is only one
concrete implementation. This change removes the interfaces, makes
all of the classes final and removes the duplicate `foo` `getFoo` accessors
in favor of `getFoo` from these classes.
Elasticsearch v5.0.0 uses allocation IDs to safely allocate primary shards whereas prior versions of ES used a version-based mode instead. Elasticsearch v5 still has support for version-based primary shard allocation as it needs to be able to load 2.x shards. ES v6 can drop the legacy support.
#22194 gave us the ability to open low level temporary connections to remote node based on their address. With this use case out of the way, actual full blown connections should validate the node on the other side, making sure we speak to who we think we speak to. This helps in case where multiple nodes are started on the same host and a quick node restart causes them to swap addresses, which in turn can cause confusion down the road.
Secure settings from the elasticsearch keystore were not yet validated.
This changed improves support in Settings so that secure settings more
seamlessly blend in with normal settings, allowing the existing settings
validation to work. Note that the setting names are still not validated
(yet) when using the elasticsearc-keystore tool.
As part of #22116 we are going to forbid usage of api
java.net.URL#openStream(). However in a number of places across the
we use this method to read files from the local filesystem. This commit
introduces a helper method openFileURLStream(URL url) to read files
from URLs. It does specific validation to only ensure that file:/
urls are read.
Additionlly, this commit removes unneeded method
FileSystemUtil.newBufferedReader(URL, Charset). This method used the
openStream () method which will soon be forbidden. Instead we use the
Files.newBufferedReader(Path, Charset).
This is in order to trigger listeners for disconnect events, most importantly the NodeFaultDetection. MockTransportService now does slightly a better job at mimicking real life failures: connecting to already connected node will be a noop (we don't detect any errors here in production either) and failing to send will cause the target node to be disconnected.
This is the cause of failure in https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+5.2+multijob-unix-compatibility/os=debian/72
When a node receives a new cluster state from the master, it opens up connections to any new node in the cluster state. That has always been done serially on the cluster state thread but it has been a long standing TODO to do this concurrently, which is done by this PR.
This is spin off of #22828, where an extra handshake is done whenever connecting to a node, which may slow down connecting. Also, the handshake is done in a blocking fashion which triggers assertions w.r.t blocking requests on the cluster state thread. Instead of adding an exception, I opted to implement concurrent connections which both side steps the assertion and compensates for the extra handshake.
This commit upgrades the checkstyle configuration from version 5.9 to
version 7.5, the latest version as of today. The main enhancement
obtained via this upgrade is better detection of redundant modifiers.
Relates #22960
This change adds a strict mode for xcontent parsing on the rest layer. The strict mode will be off by default for 5.x and in a separate commit will be enabled by default for 6.0. The strict mode, which can be enabled by setting `http.content_type.required: true` in 5.x, will require that all incoming rest requests have a valid and supported content type header before the request is dispatched. In the non-strict mode, the Content-Type header will be inspected and if it is not present or not valid, we will continue with auto detection of content like we have done previously.
The content type header is parsed to the matching XContentType value with the only exception being for plain text requests. This value is then passed on with the content bytes so that we can reduce the number of places where we need to auto-detect the content type.
As part of this, many transport requests and builders were updated to provide methods that
accepted the XContentType along with the bytes and the methods that would rely on auto-detection have been deprecated.
In the non-strict mode, deprecation warnings are issued whenever a request with body doesn't provide the Content-Type header.
See #19388
This commit change ElasticsearchException.failureFromXContent() method so that it now parses root causes which were ignored before, and adds them as suppressed exceptions of the returned exception.
The seq# base recovery logic relies on rolling back lucene to remove any operations above the global checkpoint. This part of the plan is not implemented yet but have to have these guarantees. Instead we should make the seq# logic validate that the last commit point (and the only one we have) maintains the invariant and if not, fall back to file based recovery.
This commit adds a test that creates situation where rollback is needed (primary failover with ops in flight) and fixes another issue that was surfaced by it - if a primary can't serve a seq# based recovery request and does a file copy, it still used the incoming `startSeqNo` as a filter.
Relates to #22484 & #10708
With the new secure settings, methods like getAsMap() no longer work
correctly as a means of checking for empty settings, or the total size.
This change converts the existing uses of that method to use methods
directly on Settings. Note this does not update the implementations to
account for SecureSettings, as that will require a followup which
changes how secure settings work.
Also adds many `equals` and `hashCode` implementations and moves
the failure printing in `MatchAssertion` into a common spot and
exposes it over `assertEqualsWithErrorMessageFromXContent` which
does an object equality test but then uses `toXContent` to print
the differences.
Relates to #22278
This moves the building blocks for delete by query into core. This
should enabled two thigns:
1. Plugins other than reindex to implement "bulk by scroll" style
operations.
2. Plugins to directly call delete by query. Those plugins should
be careful to make sure that task cancellation still works, but
this should be possible.
Notes:
1. I've mostly just moved classes and moved around tests methods.
2. I haven't been super careful about cohesion between these core
classes and reindex. They are quite interconnected because I wanted
to make the change as mechanical as possible.
Closes#22616
* S3 repository: Add named configurations
This change implements named configurations for s3 repository as
proposed in #22520. The access/secret key secure settings which were
added in #22479 are reverted, and the only secure settings are those
with the new named configs. All other previously used settings for the
connection are deprecated.
closes#22520
Also adds many `equals` and `hashCode` implementations and moves
the failure printing in `MatchAssertion` into a common spot and
exposes it over `assertEqualsWithErrorMessageFromXContent` which
does an object equality test but then uses `toXContent` to print
the differences.
Relates to #22278
This commit introduces sequence-number-based recovery. When a replica
has fallen out of sync, rather than performing a file-based recovery we
first attempt to replay operations since the last local checkpoint on
the replica. To do this, at the start of recovery the replica tells the
primary what its local checkpoint is. The primary will then wait for all
operations between that local checkpoint and the current maximum
sequence number to complete; this is to ensure that there are no gaps in
the operations that will be replayed from the primary to the
replica. This is a best-effort attempt as we currently have no
guarantees on the primary that these operations will be available; if we
are not able to replay all operations in the desired range, we just
fallback to file-based recovery. Later work will strengthen the
guarantees.
Relates #22484
* Add top hits collapsing to search request
The field collapsing is done with a custom top docs collector that "collapse" search hits with same field value.
The distributed aspect is resolve using the two passes that the regular search uses. The first pass "collapse" the top hits, then the coordinating node merge/collapse the top hits from each shard.
```
GET _search
{
"collapse": {
"field": "category",
}
}
```
This change also adds an ExpandCollapseSearchResponseListener that intercepts the search response and expands collapsed hits using the CollapseBuilder#innerHit} options.
The retrieval of each inner_hits is done by sending a query to all shards filtered by the collapse key.
```
GET _search
{
"collapse": {
"field": "category",
"inner_hits": {
"size": 2
}
}
}
```
To effectively allow a plugin to intercept a transport handler it needs
to know if the handler must be executed even if there is a rejection on the
thread pool in the case the wrapper forks a thread to execute the actual handler.
Today we try to be smart and make a generic decision if an exception should
be treated as a document failure but in some cases concurrency in the index writer
make this decision very difficult since we don't have a consistent state in the case
another thread is currently failing the IndexWriter/InternalEngine due to a tragic event.
This change simplifies the exception handling and makes specific decisions about document failures
rather than using a generic heuristic. This prevent exceptions to be treated as document failures
that should have failed the engine but backed out of failing since since some other thread has
already taken over the failure procedure but didn't finish yet.
* S3 repository: Deprecate specifying credentials through env vars and sys props
This is a follow up to #22479, where storing credentials secure way was
added.
Today we do not preserve response headers if they are present on a transport protocol
response. While preserving these headers is not always desired, in the most cases we
should pass on these headers to have consistent results for depreciation headers etc.
yet, this hasn't been much of a problem since most of the deprecations are detected early
ie. on the coordinating node such that this bug wasn't uncovered until #22647
This commit allow to optionally preserve headers when a context is restored and also streamlines
the context restore since it leaked frequently into the callers thread context when the callers
context wasn't restored again.
Previously, certain settings that could take multiple comma delimited
values would pick up incorrect values for all entries but the first if
each comma separated value was followed by a whitespace character. For
example, the multi-value "A,B,C" would be correctly parsed as
["A", "B", "C"] but the multi-value "A, B, C" would be incorrectly parsed
as ["A", " B", " C"].
This commit allows a comma separated list to have whitespace characters
after each entry. The specific settings that were affected by this are:
cluster.routing.allocation.awareness.attributes
index.routing.allocation.require.*
index.routing.allocation.include.*
index.routing.allocation.exclude.*
cluster.routing.allocation.require.*
cluster.routing.allocation.include.*
cluster.routing.allocation.exclude.*
http.cors.allow-methods
http.cors.allow-headers
For the allocation filtering related settings, this commit also provides
validation of each specified entry if the filtering is done by _ip,
_host_ip, or _publish_ip, to ensure that each entry is a valid IP
address.
Closes#22297
Today we have quite some abstractions that are essentially providing a simple
dispatch method to the plugins defining a `HttpServerTransport`. This commit
removes `HttpServer` and `HttpServerAdaptor` and introduces a simple `Dispatcher` functional
interface that delegate to `RestController` by default.
Relates to #18482
All the language clients support a special ignore parameter that doesn't get passed to elasticsearch with the request, but used to indicate which error code should not lead to an exception if returned for a specific request.
Moving this to the low level REST client will allow the high level REST client to make use of it too, for instance so that it doesn't have to intercept ResponseExceptions when the get api returns a 404.
TransportInterceptors are commonly used to enrich requests with headers etc.
which requires access the the thread context. This is not always easily possible
since threadpools are hard to access for instance if the interceptor is used on a transport client.
This commit passes on the thread context to all the interceptors for further consumption.
Closes#22585
ClusterService and TransportService expect the local discovery node to be set
before they are started but this requires manual interaction and is error prone since
to work absolutely correct they should share the same instance (same ephemeral ID).
TransportService also has 2 modes of operation, mainly realted to transport client vs. internal
to a node. This change removes the mode where we don't maintain a local node and uses a dummy local
node in the transport client since we don't bind to any port in such a case.
Local discovery node instances are now managed by the node itself and only suppliers and factories that allow
creation only once are passed to TransportService and ClusterService.
There was still small race in MockTcpTransport where channesl that are concurrently
closing are not yet removed from the reference tracking causing tests to fail. Compared to
the other races before this is a rather small windown and requires very very short test durations.
Today there are several races / holes in TcpTransport and MockTcpTransport
that can allow connections to be opened and remain unclosed while the actual
transport implementation is closed. A recently added assertions in #22554 exposes
these problems. This commit fixes several issues related to missed locks or channel
creations outside of a lock not checking if the resource is still open.
There are some parameters that are accepted by each and every api we expose. Those (pretty, source, error_trace and filter_path) are not explicitly listed in the spec of every api, rather whitelisted in clients test runners so that they are always accepted. The `human` flag has been treated up until now as a parameter that's accepted by only some stats and info api, but that doesn't reflect reality as es core treats it exactly like `pretty` (relevant especially now that we validate params and throw exception when we find one that is not supported). Furthermore, the human flag has effect on every api that outputs a date, time, percentage or byte size field. For instance the tasks api outputs a date field although they don't have the human flag explicitly listed in their spec. There are other similar cases. This commit removes the human flag from the rest spec and makes it an always accepted query_string param.
TcpTransport has an actual mechanism to stop resources in subclasses.
Instead of overriding `doStop` subclasses should override `stopInternal`
that is executed under the connection lock guaranteeing that there is no
concurrency etc.
Relates to #22554
* Settings: Make s3 repository sensitive settings use secure settings
This change converts repository-s3 to use the new secure settings. In
order to support the multiple ways we allow aws creds to be configured,
it also moves the main methods for the keystore wrapper into a
SecureSettings interface, in order to allow settings prefixing to work.
The low level TCP handshake can cause channel / connection leaks if it's interrupted
since the caller doesn't close the channel / connection if the handshake was not successful.
This commit fixes the channel leak and adds general test infrastructure to detect channel leaks
in the future.
This commit adds the parsing fromXContent() methods to the IndexResponse class. The method is based on a ObjectParser because it is easier to use when parsing parent abstract classes like DocWriteResponse.
It also changes the ReplicationResponse.ShardInfo so that it now implements ToXContentObject. This way, the ShardInfo.fromXContent() method can be used by the IndexResponse's ObjectParser.
The NodeConnectionsService currently determines which nodes to connect to / disconnect from by inspecting cluster state changes and connecting to added nodes / disconnecting from removed nodes. When a master steps down (for example due to another master-eligible node shutting down which brings the number of master-eligible nodes below minimum_master_master), and the connection to other existing nodes was dropped while pinging, however, the connection to these nodes is not re-established while publishing the first cluster state that establishes the node as master.
This commit changes the NodeConnectionsService connect / disconnect logic to always rely on the state that is to be / was published, looking not only at the added / removed nodes, but validating that exactly all nodes that are currently registered in NodeConnectionsService are connected (corresponds to a NOOP if the node is already connected).
Right now closing a shard looks like it strands refresh listeners,
causing tests like
`delete/50_refresh/refresh=wait_for waits until changes are visible in search`
to fail. Here is a build that fails:
https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+multi_cluster_search+multijob-darwin-compatibility/4/console
This attempts to fix the problem by implements `Closeable` on
`RefreshListeners` and rejecting listeners when closed. More importantly
the act of closing the instance flushes all pending listeners
so we shouldn't have any stranded listeners on close.
Because it was needed for testing, this also adds the number of
pending listeners to the `CommonStats` object and all API to which
that flows: `_cat/nodes`, `_cat/indices`, `_cat/shards`, and
`_nodes/stats`.
This is related to #22116. A logIfNecessary() call makes a call to
NetworkInterface.getInterfaceAddresses() requiring SocketPermission
connect privileges. By moving this to bootstrap the logging call can be
made before installing the SecurityManager.
Today we execute the low level handshake on the TCP layer in #connectToNode.
If #openConnection is used directly, which is truly expert, no handshake is executed
which allows connecting to nodes that are not necessarily compatible. This change
moves the handshake to #openConnection to prevent bypassing this logic.
This integrates the mocksocket jar with elasticsearch tests. Mocksocket wraps actions requiring SocketPermissions in doPrivilege blocks. This will eventually allow SocketPermissions to be assigned to the mocksocket jar opposed to the entire elasticsearch codebase.
Notifications for request tracing are invoked concurrently and can still
be in flight once a tracer is installed in the test. This can lead to side-effects
since the test relied on exact invocations. This commit adds action filtering
to the test tracer to only count invocations for the relevant actions.
Closes#22418
this commit adds full support for proxy nodes on the search layer.
This allows to connection only to a small set of nodes on a remote cluster
to exectue the search. The nodes will proxy the request to the correct node in the
cluster while the coordinting node doesn't need to be connected to the target node.
There could be an issue creating the REST clients and/or making the first request to the external cluster. If that happens, the blacklist has already been assigned and the following tests will fail because of an assertion that checks that the blacklist is not already assigned when the contexts are not.
Today we silently ignore invalid test logging annotations. This commit
rejects these annotations, failing the processing of the annotation and
aborting the test.
This commit adds a test for applying logging levels in hierarchical
order, and addresses an issue with restoring the logging levels at the
end of a test or suite.
This commit factors out the cluster state update tasks that are published (ClusterStateUpdateTask) from those that are not (LocalClusterUpdateTask), serving as a basis for future refactorings to separate the publishing mechanism out of ClusterService.
We have to sort the logger names so they wouldn't override each other. Processing org.elasticsearch:DEBUG after org.elasticsearch.transport:TRACE resets the setting of the later
This change is the first towards providing the ability to store
sensitive settings in elasticsearch. It adds the
`elasticsearch-keystore` tool, which allows managing a java keystore.
The keystore is loaded upon node startup in Elasticsearch, and used by
the Setting infrastructure when a setting is configured as secure.
There are a lot of caveats to this PR. The most important is it only
provides the tool and setting infrastructure for secure strings. It does
not yet provide for keystore passwords, keypairs, certificates, or even
convert any existing string settings to secure string settings. Those
will all come in follow up PRs. But this PR was already too big, so this
at least gets a basic version of the infrastructure in.
The two main things to look at. The first is the `SecureSetting` class,
which extends `Setting`, but removes the assumption for the raw value of the
setting to be a string. SecureSetting provides, for now, a single
helper, `stringSetting()` to create a SecureSetting which will return a
SecureString (which is like String, but is closeable, so that the
underlying character array can be cleared). The second is the
`KeyStoreWrapper` class, which wraps the java `KeyStore` to provide a
simpler api (we do not need the entire keystore api) and also extend
the serialized format to add metadata needed for loading the keystore
with no assumptions about keystore type (so that we can change this in
the future) as well as whether the keystore has a password (so that we
can know whether prompting is necessary when we add support for keystore
passwords).
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
This adds test classes that can be used to test the wire serialisation and (optionally) the XContent serialisation of objects that implement Streamable/Writeable and ToXContent.
These test classes will enable classes sich as InternalAggregation (or at least its implementations) to be tested in a consistent way when is comes to testing serialisation.
As the translog evolves towards a full operations log as part of the
sequence numbers push, there is a need for the translog to be able to
represent operations for which a sequence number was assigned, but the
operation did not mutate the index. Examples of how this can arise are
operations that fail after the sequence number is assigned, and gaps in
this history that arise when an operation is assigned a sequence number
but the operation never completed (e.g., a node crash). It is important
that these operations appear in the history so that they can be
replicated and replayed during recovery as otherwise the history will be
incomplete and local checkpoints will not be able to advance. This
commit introduces a no-op to the translog to set the stage for these
efforts.
Relates #22291
The `UnicastZenPing` shows it's age and is the result of many small changes. The current state of affairs is confusing and is hard to reason about. This PR cleans it up (while following the same original intentions). Highlights of the changes are:
1) Clear 3 round flow - no interleaving of scheduling.
2) The previous implementation did a best effort attempt to wait for ongoing pings to be sent and completed. The pings were guaranteed to complete because each used the total ping duration as a timeout. This did make it hard to reason about the total ping duration and the flow of the code. All of this is removed now and ping should just complete within the given duration or not be counted (note that it was very handy for testing, but I move the needed sync logic to the test).
3) Because of (2) the pinging scheduling changed a bit, to give a chance for the last round to complete. We now ping at the beginning, 1/3 and 2/3 of the duration.
4) To offset for (3) a bit, incoming ping requests are now added to on going ping collections.
5) UnicastZenPing never establishes full blown connections (but does reuse them if there). Relates to #22120
6) Discovery host providers are only used once per pinging round. Closes#21739
7) Usage of the ability to open a connection without connecting to a node ( #22194 ) and shorter connection timeouts helps with connections piling up. Closes#19370
8) Beefed up testing and sped them up.
9) removed light profile from production code
If we conditionally do random things, e.g. initialize a node only after the first test, we have to make sure that we unconditionally create a new seed calling random.nextLong(), then initialize the node under a private randomness context. This makes sure that any random usage through Randomness.get() will retrieve the proper random instance through RandomizedContext.current().getRandom(). When running under private randomness, the context will return the Random instance that was created with the provided seed (forked from the main random instance) rather than the main Random that's exposed to tests as well. Otherwise tests become non repeatable because that initialization part happens only before the first executed test.
Introduces `XContentParser#namedObject which works a little like
`StreamInput#readNamedWriteable`: on startup components register
parsers under names and a superclass. At runtime we look up the
parser and call it to parse the object.
Right now the parsers take a context object they use to help with
the parsing but I hope to be able to eliminate the need for this
context as most what it is used for at this point is to move
around parser registries which should be replaced by this method
eventually. I make no effort to do so in this PR because it is
big enough already. This is meant to the a start down a road that
allows us to remove classes like `QueryParseContext`,
`AggregatorParsers`, `IndicesQueriesRegistry`, and
`ParseFieldRegistry`.
The goal here is to reduce the amount of plumbing required to
allow parsing pluggable things. With this you don't have to pass
registries all over the place. Instead you must pass a super
registry to fewer places and use it to wrap the reader. This is
the same tradeoff that we use for NamedWriteable and it allows
much, much simpler binary serialization. We think we want that
same thing for xcontent serialization.
The only parsing actually converted to this method is parsing
`ScoreFunctions` inside of `FunctionScoreQuery`. I chose this
because it is relatively self contained.
* Internal: Refactor SettingCommand into EnvironmentAwareCommand
This change renames and changes the behavior of SettingCommand to have
its primary method take in a fully initialized Environment for
elasticsearch instead of just a map of settings. All of the subclasses
of SettingCommand already did this at some point, so this just removes
duplication.
We are currenlty checking that no deprecation warnings are emitted in our query tests. That can be moved to ESTestCase (disabled in ESIntegTestCase) as it allows us to easily catch where our tests use deprecated features and assert on the expected warnings.
We return deprecation warnings as response headers, besides logging them. Strict parsing mode stayed around, but was only used in query tests, though we also introduced checks for deprecation warnings there that don't need strict parsing anymore (see #20993).
We can then safely remove support for strict parsing mode. The final goal is to remove the ParseFieldMatcher class, but there are many many users of it. This commit prepares the field for the removal, by deprecating ParseFieldMatcher and making it effectively not needed. Strict parsing is removed from ParseFieldMatcher, and strict parsing is replaced in tests where needed with deprecation warnings checks.
Note that the setting to enable strict parsing was never ported to the new settings infra hance it cannot be set in production. It is really only used in our own tests.
Relates to #19552
Rename the method to assertToXContentEquivalent to highlight that it's tailored to ToXContent comparisons.
Rather than parsing into a map and replacing byte[] in both those maps, add custom equality assertions that recursively walk maps and lists and call Arrays.equals whenever a byte[] is encountered.
Moved field values `toXContent` logic to `GetField` (from `GetResult`), which outputs its own fields, and can also parse them now. Also added `fromXContent` to `GetResult` and `GetResponse`.
The start object and end object for `GetResponse` output have been moved to `GetResult#toXContent`, from the corresponding rest action. This makes it possible to have `toXContent` and `fromXContent` completely symmetric, as parsing requires looping till an end object is found which is weird when the corresponding `toXContent` doesn't print that out.
This also introduces the foundation for testing retrieval of _source and stored field values.
This commit makes mapping updates atomic when multiple types in an index are updated. Mappings for an index are now applied in a single atomic operation, which also allows to optimize some of the cross-type updates and checks.
Sequence BWC logic consists of two elements:
1) Wire level BWC using stream versions.
2) A changed to the global checkpoint maintenance semantics.
For the sequence number infra to work with a mixed version clusters, we have to consider situation where the primary is on an old node and replicas are on new ones (i.e., the replicas will receive operations without seq#) and also the reverse (i.e., the primary sends operations to a replica but the replica can't process the seq# and respond with local checkpoint). An new primary with an old replica is a rare because we do not allow a replica to recover from a new primary. However, it can occur if the old primary failed and a new replica was promoted or during primary relocation where the source primary is treated as a replica until the master starts the target.
1) Old Primary & New Replica - this case is easy as is taken care of by the wire level BWC. All incoming requests will have their seq# set to `UNASSIGNED_SEQ_NO`, which doesn't confuse the local checkpoint logic (keeping it at `NO_OPS_PERFORMED`)
2) New Primary & Old replica - this one is trickier as the global checkpoint service currently takes all in sync replicas into consideration for the global checkpoint calculation. In order to deal with old replicas, we change the semantics to say all *new node* in sync replicas. That means the replicas on old nodes don't count for the global checkpointing. In this state the seq# infra is not fully operational (you can't search on it, because copies may miss it) but it is maintained on shards that can support it. The old replicas will have to go through a file based recovery at some point and will get the seq# information at that point. There is still an edge case where a new primary fails and an old replica takes over. I'lll discuss this one with @ywelsch as I prefer to avoid it completely.
This PR also re-enables the BWC tests which were disabled. As such it had to fix any BWC issue that had crept in. Most notably an issue with the removal of the `timestamp` field in #21670.
The commit also includes a fix for the default value of the seq number field in replicated write requests (it was 0 but should be -2), that surface some other minor bugs which are fixed as well.
Last - I added some debugging tools like more sane node names and forcing replication request to implement a `toString`
With this commit we enable the Jackson feature 'STRICT_DUPLICATE_DETECTION'
by default for all XContent types (not only JSON).
We have also changed the name of the system property to disable this feature
from `es.json.strict_duplicate_detection` to the now more appropriate name
`es.xcontent.strict_duplicate_detection`.
Relates elastic/elasticsearch#19614
Relates elastic/elasticsearch#22073
In #22094 we introduce a test-only setting to simulate transport
impls that don't support handshakes. This commit implements the same logic
without a setting.
This commit touches addresses issues related to recovery and sequence numbers:
- A sequence number can be assigned and a Lucene commit created with a
maximum sequence number at least as large as that sequence number,
yet the operation corresponding to that sequence number can be
missing from both the Lucene commit and the translog. This means that
upon recovery the local checkpoint will be stuck at or below this
missing sequence number. To address this, we force the local
checkpoint to the maximum sequence number in the Lucene commit when
opening the engine. Note that there can still be gaps in the history
in the translog but we do not address those here.
- The global checkpoint is transferred to the target shard at the end
of peer recovery.
- Additionally, we reenable the relocation integration tests.
Lastly, this work uncovered some bugs in the assignment of sequence
numbers on replica operations:
- setting the sequence number on replica write requests was missing,
very likely introduced as a result of resolving merge conflicts
- handling operations that arrive out of order on a replica and have a
version conflict with a previous operation were never marked as
processed
Relates #22212
Some expert users like UnicastZenPing today establishes real connections to nodes during it's ping
phase that can be used by other parts of the system. Yet, this is potentially dangerous
and undesirable unless the nodes have been fully verified and should be connected to in the
case of a cluster state update or if we join a newly elected master. For use-cases like this, this change adds the infrastructure to manually handle connections that are not publicly available on the node ie. should not be managed by `Transport`/`TransportSerivce`
Sends the `error_trace` parameter with all requests sent by the
yaml test framework, including the doc snippet tests. This can be
overridden by settings `error_trace: false`. While this drift's
core's handling of the yaml tests from the client's slightly this
should only be a problem for tests that rely on the default value,
both of which I've fixed by setting the value explicitly.
This also escapes `\n` and `\t` in the `Stash dump on failure` so
the `stack_trace` is more readable.
Also fixes `RestUpdateSettingsAction` to not think of the `error_trace`
parameter as a setting.
`ClusterService` is responsible of updating the cluster state on every node (as a response to an API call on the master and when non-masters receive a new state from the master). When a new cluster state is processed, it is made visible via the `ClusterService#state` method and is sent to series of listeners. Those listeners come in two flavours - one is to change the state of the node in response to the new cluster state (call these cluster state appliers), the other is to start a secondary process. Examples for the later include an indexing operation waiting for a shard to be started or a master node action waiting for a master to be elected.
The fact that we expose the state before applying it means that samplers of the cluster state had to worry about two things - working based on a stale CS and working based on a future, i.e., "being applied" CS. The `ClusterStateStatus` was used to allow distinguishing between the two. Working with a stale cluster state is not avoidable. How this PR changes things to make sure consumers don't need to worry about future CS, removing the need for the status and simplifying the waiting logic.
This change does come with a price as "cluster state appliers" can't sample the cluster state from `ClusterService` whenever they want as the cluster state isn't exposed yet. However, recent clean ups made this is situation easier and this PR takes the last steps to remove such sampling. This also helps clarify the "information flow" and helps component separation (and thus potential unit testing). It also adds an assertion that will trigger if the cluster state is sampled by such listeners.
Note that there are still many "appliers" that could be made a simpler, unrestricted "listener" but this can be done in smaller bits in the future. The commit also makes it clear what the `appliers` and what the `listeners` are by using dedicated interfaces.
Also, since I had to change the listener types I went ahead and changed the data structure for temporary/timeout listeners (used for the observer) so addition and removal won't be an O(n) operation.
Since #22094 has been back-ported to 5.2 we can remove all BWC layers from master since all supported version will handle handshake requests.
Relates to #22094
Today sending a message on a closed channel doesn't throw an exception. The channel
might just swallow the exception and informs the internal async exception handler
that a channel got disconnected. This change adds a safety check that we fail
the handshake if we registered a handler but the channel has been closed already
for instance due to a reset by peer.
Low level handshake code doesn't handle situations gracefully if the connection
is concurrently closed or reset by peer. This commit adds the relevant code to
fail the handshake if the connection is closed.
In order to start clusters with min master nodes set without setting `discovery.initial_state_timeout`, #21846 has changed the way we start nodes. Instead to the previous serial start up, we now always start the nodes in an async fashion (internally). This means that starting a cluster is unsafe without `min_master_nodes` being set. We should therefore make it mandatory.
With this commit we enable the Jackson feature 'STRICT_DUPLICATE_DETECTION'
by default. This ensures that JSON keys are always unique. While this has
a performance impact, benchmarking has indicated that the typical drop in
indexing throughput is around 1 - 2%.
As a last resort, we allow users to still disable strict duplicate checks
by setting `-Des.json.strict_duplicate_detection=false` which is
intentionally undocumented.
Closes#19614
This commit enables CLI commands to be closeable and installs a runtime
shutdown hook to ensure that if the JVM shuts down (as opposed to
aborting) the close method is called.
It is not enough to wrap uses of commands in main methods in
try-with-resources blocks as these will not run if, say, the virtual
machine is terminated in response to SIGINT, or system shutdown event.
Relates #22126
Today we rely on the version that the API user passes in together with the DiscoveryNode. This commit introduces a low level handshake where nodes exchange their version to be used with the transport protocol that is executed every time a connection to a node is established. This, on the one hand allows to change the wire protocol based on the version we are talking to even without a full cluster restart. Today we would need to carry on a BWC layer across major versions but with a handshake we can rely on the fact that the latest version of the previous minor executes a handshake and uses the latest protocol version across all communication with the N+1 version nodes.
This change is yet fully backwards compatible, a followup PR will remove the BWC in 6.0 once this has been back-ported to the 5.x branch
Starts to centralize creation of the `XContentParser` in
`protected final` methods on `ESTestCase`. The idea is to enable
adding `NamedXContentRegistry` relatively easily by giving tests
a single place they can override to define the
`NamedXContentRegistry`. Since `NamedXContentRegistry` doesn't
exist yet neither does the override point.
This doesn't attempt to migrate all the tests to calling the
new methods to build the parsers. I wanted to make this so we
could review the concept and then I'll merge a followup to
migrate the tests.
Plugins also have the need to provide better OOTB experience by configuring
defaults unless the plugin is used in _production_ mode. This change exposes
the bootstrap check infrastructure as part of the plugin API to allow plugins
to specify / install their own bootstrap checks if necessary.
Our query DSL supports empty queries (`{}`), which have a different meaning depending on the query that holds it, either ignored, match_all or match_none. We deprecated the support for empty queries in 5.0, where we log a deprecation warning wherever they are used.
The way we supported it once we moved query parsing to the coordinating node was having an Optional<QueryBuilder> return type in all of our parse methods (called fromXContent). See #17624. The central place for this was QueryParseContext#parseInnerQueryBuilder. We can now remove all the optional return types and simply throw an exception whenever an empty query is found.
This change allows specifying alias/wildcard expression in indices_boost.
And added another format for specifying indices_boost. It accepts array of index name and boost pair.
If an index is included in multiple aliases/wildcard expressions, the first match will be used.
With new format, old format is marked as deprecated.
Closes#4756
Today we connect and publish the nodes connection before we execute a
handshake with the node we connect to. In the case of connecting to a node
that won't pass the handshake this connection is already `published` and other
code paths can use it. This commit detaches the connection and the publish of the
connection such that `TransportService` can do a handshake before actually connect
and publish the connection.
* Remove 2.0 prerelease version constants
This is a start to addressing #21887. This removes:
* pre 2.0 snapshot format support
* automatic units addition to cluster settings
* bwc check for delete by query in pre 2.0 indexes
If you write a yaml test with a `warnings` section in a `do` block
that doesn't also have a corresponding `skip` section for `warnings`
then client test runners that don't support `warnings` will fail.
This causes the elasticsearch build to fail so we catch these errors
earlier.
Related to #21811
This commit enhances the allocator decision result objects (namely,
AllocateUnassignedDecision, MoveDecision, and RebalanceDecision)
to enable them to be used directly by the cluster allocation explain API. In
particular, this commit does the following:
- Adds serialization and toXContent methods to the response objects,
which will form the explain API responses.
- Moves the calculation of the final explanation to the response
object itself, removing it from the responsibility of the allocators.
- Adds shard store information to the NodeAllocationResult, so that
store information is available for each node, when explaining a
shard allocation by the PrimaryShardAllocator or the ReplicaShardAllocator.
- Removes RebalanceDecision in favor of using MoveDecision for both
moving and rebalancing shards.
- Removes NodeRebalanceResult in favor of using NodeAllocationResult.
- Changes the notion of weight ranking to be relative to the current node,
instead of an absolute weight that doesn't convey any added value to the
API user and can be confusing.
- Introduces a new enum AllocationDecision to convey the decision type,
which enables conveying unassigned, moving, and rebalancing scenarios
with more detail as opposed to just Decision.Type and AllocationStatus.
We had tests for the regular factories, but not for the pre-built ones, that
ship by default without requiring users to define them in the analysis settings.
Since the removal of local discovery of #https://github.com/elastic/elasticsearch/pull/20960 we rely on minimum master nodes to be set in our test cluster. The settings is automatically managed by the cluster (by default) but current management doesn't work with concurrent single node async starting. On the other hand, with `MockZenPing` and the `discovery.initial_state_timeout` set to `0s` node starting and joining is very fast making async starting an unneeded complexity. Test that still need async starting could, in theory, still do so themselves via background threads.
Note that this change also removes the usage of `INITIAL_STATE_TIMEOUT_SETTINGS` as the starting of nodes is done concurrently (but building them is sequential)
Changes the default socket and connection timeouts for the rest
client from 10 seconds to the more generous 30 seconds.
Defaults reindex-from-remote to those timeouts and make the
timeouts configurable like so:
```
POST _reindex
{
"source": {
"remote": {
"host": "http://otherhost:9200",
"socket_timeout": "1m",
"connect_timeout": "10s"
},
"index": "source",
"query": {
"match": {
"test": "data"
}
}
},
"dest": {
"index": "dest"
}
}
```
Closes#21707
We don't use the test infra nor do we run the tests. They might all be
entirely out of date. We also have a different BWC test infra in-place.
This change removes all of the legacy infra.
Today we can easily join a cluster that holds an index we don't support since
we currently allow rolling upgrades from 5.x to 6.x. Along the same lines we don't check if we can support an index based on the nodes in the cluster when we open, restore or metadata-upgrade and index. This commit adds
additional safety that fails cluster state validation, open, restore and /or upgrade if there is an open index with an incompatible index version created in the cluster.
Realtes to #21670
Timeouts are global today across all connections this commit allows to specify
a connection timeout per node such that depending on the context connections can
be established with different timeouts.
Relates to #19719
Currently we have these logs for integration tests only.
This adds the following log at the start:
```
logger.info("[{}]: before test", getTestName());
```
and this is logged at the end, but before any clean up done in sub classes
```
logger.info("[{}]: after test", getTestName());
```
For the record, I also had to remove the geo-hash cell and geo-distance range
queries to make the code compile. These queries already throw an exception in
all cases with 5.x indices, so that does not hurt any more.
I also had to rename all 2.x bwc indices from `index-${version}` to
`unsupported-${version}` to make `OldIndexBackwardCompatibilityIT`
happy.
Lucene 6.2 added index and query support for numeric ranges. This commit adds a new RangeFieldMapper for indexing numeric (int, long, float, double) and date ranges and creating appropriate range and term queries. The design is similar to NumericFieldMapper in that it uses a RangeType enumerator for implementing the logic specific to each type. The following range types are supported by this field mapper: int_range, float_range, long_range, double_range, date_range.
Lucene does not provide a DocValue field specific to RangeField types so the RangeFieldMapper implements a CustomRangeDocValuesField for handling doc value support.
When executing a Range query over a Range field, the RangeQueryBuilder has been enhanced to accept a new relation parameter for defining the type of query as one of: WITHIN, CONTAINS, INTERSECTS. This provides support for finding all ranges that are related to a specific range in a desired way. As with other spatial queries, DISJOINT can be achieved as a MUST_NOT of an INTERSECTS query.
The Transport#connectToNodeLight concepts is confusing and not very flexible.
neither really testable on a unittest level. This commit cleans up the code used
to connect to nodes and simplifies transport implementations to share more code.
This also allows to connect to nodes with custom profiles if needed, for instance
future improvements can be added to connect to/from nodes that are non-data nodes without
dedicated bulks and recovery connections.
In the past we ran yaml tests against an internal cluster, which would get restarted after each test failure, hence the client objects needed to eventually be refreshed before each test. That is why we had the initClient method to re-initialize the YamlTestClient in the execution context. We ended up though re-initializing the client unconditionally, which is not needed.
Also, ESRestTestCase recreates the RestClient against the external cluster before each test, which is not needed given that nothing changes in the external cluster.
This commit removes the initClient method from the yaml tests execution context. The YamlTestClient can be eagerly created before the first yaml test runs and then re-used in subsequent tests. Also api calls to check for nodes versions etc. are moved out of YamlTestClient to ESClientYamlSuiteTestCase. Also the RestClient is now initialized in ESRestTestCase before the first test runs, and kept around afterwards as a static member.
Basically each subclass of EsRestTestCase will have its own RestClient instance, but the client will be shared across the different tests within the same class. The yaml test suite is just a special suite, composed of 600+ tests that are loaded from files, which will share the same client instance.
This change should speed tests up as well, as we don't recreate the RestClient before each single test, and we don't call _cat/nodes either before each single test.
TransportAddress used to be customizable per transport but this has been removed
a while ago. Therefore we can remove all usage of this method as well.
Relates to #20695
The disruption type LongGCDisruption simulates GCs on a node by suspending all the threads of that node. If the suspended threads are in a code section with shared JVM locks, however, it can prevent the other nodes from doing their thing. The class LongGCDisruption has a list of class names for which we know that this can occur. Whenever a test using the GC disruption type fails in mysterious ways, it becomes a long guessing game to find the offending class. This commit adds code to LongGCDisruption to automatically detect these situations, fail the test early and report the offending class and all relevant context.
Today when handling unreleased versions for backwards compatilibity
support, we scatted version constants across the code base and add some
asserts to support removing these constants when the version in question
is actually released. This commit improves this situation, enabling us
to just add a single unreleased version constant that can be renamed
when the version is actually released. This should make maintenance of
these versions simpler.
Relates #21760
Ryan Ernst
Adrien Grand
Jason Tedor
Ali Beyad
Lee Hinman
Colin Goodheart-Smithe
Jay Modi
javanna
Yannick Welsch
Luca Cavanna
Boaz Leskes
Tim Brooks
Igor Motov
Christoph Büscher
Jim Ferenczi
Simon Willnauer
Tanguy Leroux
jaymode
Nik Everett
Michael McCandless
Simon Willnauer
Daniel Mitterdorfer
Daniel Mitterdorfer
Masaru Hasegawa
Nicholas Knize