The skip_unavailable setting did not exist until 6.1.0. This means that
we need to skip this test on versions prior to 6.1.0. We need to use
this setting because otherwise we will fail startup without it (since we
are not setting up a real remote cluster connection). This commit adds a
skip for all versions prior to 6.1.0.
The change to upgrade cross-cluster search settings was backported to
6.5.0. Therefore, this assumption needs to be reduced to the latest
version where settings were not automatically upgraded.
This commit adds settings upgraders for the search.remote.* settings
that can be in the cluster state to automatically upgrade these settings
to cluster.remote.*. Because of the infrastructure that we have here,
these settings can be upgraded when recovering the cluster state, but
also when a user tries to make a dynamic update for these settings.
These logs are incredibly verbose, and it makes chasing normal failures
burdensome. This commit removes the debug logging, which can be
reenabled again if needed.
Clean up on top of the last fix: if we skip the entire test case then
the test run would fail because we skipped all the tests. This adds a
dummy test case to prevent that. It is a fairly nasty work around I plan
to work on something that makes this not required any more anyway.
If we're running on a platform where we can't install syscall filters
Elasticsearch logs a message before it reads the data directory to get
the node name. Because that log message doesn't have a node name this
test will fail. Since we mostly run the test on OSes where we *can*
install the syscall filters we can fairly safely skip the test on OSes
where we can't install the syscall filters.
Closes#33540
Today when checking settings dependencies, we do not check if fallback
settings are present. This means, for example, that if
cluster.remote.*.seeds falls back to search.remote.*.seeds, and
cluster.remote.*.skip_unavailable and search.remote.*.skip_unavailable
depend on cluster.remote.*.seeds, and we have set search.remote.*.seeds
and search.remote.*.skip_unavailable, then validation will fail because
it is expected that cluster.ermote.*.seeds is set here. This commit
addresses this by also checking fallback settings when validating
dependencies. To do this, we adjust the settings exist method to also
check for fallback settings, a case that it was not handling previously.
Change the logging infrastructure to handle when the node name isn't
available in `elasticsearch.yml`. In that case the node name is not
available until long after logging is configured. The biggest change is
that the node name logging no longer fixed at pattern build time.
Instead it is read from a `SetOnce` on every print. If it is unset it is
printed as `unknown` so we have something that fits in the pattern.
On normal startup we don't log anything until the node name is available
so we never see the `unknown`s.
When we rollover and index we write the conditions of the rollover that
the old index met into the old index. Loading this index metadata
requires a working `NamedXContentRegistry` that has been populated with
parsers from the rollover infrastructure. We had a few loads that didn't
use a working `NamedXContentRegistry` and so would fail if they ever
encountered an index that had been rolled over. Here are the locations
of the loads and how I fixed them:
* IndexFolderUpgrader - removed entirely. It existed to support opening
indices made in Elasticsearch 2.x. Since we only need this change as far
back as 6.4.1 which will supports reading from indices created as far
back as 5.0.0 we should be good here.
* TransportNodesListGatewayStartedShards - wired the
`NamedXContentRegistry` into place.
* TransportNodesListShardStoreMetaData - wired the
`NamedXContentRegistry` into place.
* OldIndexUtils - removed entirely. It existed to support the zip based
index backwards compatibility tests which we've since replaced with code
that actually runs old versions of Elasticsearch.
In addition to fixing the actual problem I added full cluster restart
integration tests for rollover which would have caught this problem and
I added an extra assertion to IndexMetaData's deserialization code which
will trip if we try to deserialize and index's metadata without a fully
formed `NamedXContentRegistry`. It won't catch if use the *wrong*
`NamedXContentRegistry` but it is better than nothing.
Closes#33316
With features like CCR building on the CCS infrastructure, the settings
prefix search.remote makes less sense as the namespace for these remote
cluster settings than does a more general namespace like
cluster.remote. This commit replaces these settings with cluster.remote
with a fallback to the deprecated settings search.remote.
In our Netty layer we have had to take extra precautions against Netty
catching throwables which prevents them from reaching the uncaught
exception handler. This code has taken on additional uses in NIO layer
and now in the scheduler engine because there are other components in
stack traces that could catch throwables and suppress them from reaching
the uncaught exception handler. This commit is a simple cleanup of the
iterative evolution of this code to refactor all uses into a single
method in ExceptionsHelper.
This reworks how we configure the `shadow` plugin in the build. The major
change is that we no longer bundle dependencies in the `compile` configuration,
instead we bundle dependencies in the new `bundle` configuration. This feels
more right because it is a little more "opt in" rather than "opt out" and the
name of the `bundle` configuration is a little more obvious.
As an neat side effect of this, the `runtimeElements` configuration used when
one project depends on another now contains exactly the dependencies needed
to run the project so you no longer need to reference projects that use the
shadow plugin like this:
```
testCompile project(path: ':client:rest-high-level', configuration: 'shadow')
```
You can instead use the much more normal:
```
testCompile "org.elasticsearch.client:elasticsearch-rest-high-level-client:${version}"
```
WildflyIT test fails in a FIPS JVM due to the amount of output in stderr. The excessive stderr output is due to https://bugs.openjdk.java.net/browse/JDK-8202893 and is not an indication of a failure that should be tracked.
This commit adjusts the limit to something more lenient that would allow the test to succeed.
Reverts #32543
Remove a few of the logger constructors that aren't widely used or
aren't used at all and deprecate a few more logger constructors in favor
of log4j2's `LogManager`.
On some Linux distributions tmpfiles.d cleans files and
directories under /tmp if they haven't been accessed for
10 days.
This can cause problems for ML as ML is currently the only
component that uses the temp directory more than a few
seconds after startup. If you didn't open an ML job for
10 days and then tried to open one then the temp directory
would have been deleted.
This commit prevents the problem occurring in the case of
Elasticsearch being managed by systemd, as systemd private
temp directories are not subject to periodic cleanup (by
default).
Additionally there are now some docs to warn people about
the risk and suggest a manual mitigation for .tar.gz users.
First, some background: we have 15 different methods to get a logger in
Elasticsearch but they can be broken down into three broad categories
based on what information is provided when building the logger.
Just a class like:
```
private static final Logger logger = ESLoggerFactory.getLogger(ActionModule.class);
```
or:
```
protected final Logger logger = Loggers.getLogger(getClass());
```
The class and settings:
```
this.logger = Loggers.getLogger(getClass(), settings);
```
Or more information like:
```
Loggers.getLogger("index.store.deletes", settings, shardId)
```
The goal of the "class and settings" variant is to attach the node name
to the logger. Because we don't always have the settings available, we
often use the "just a class" variant and get loggers without node names
attached. There isn't any real consistency here. Some loggers get the
node name because it is convenient and some do not.
This change makes the node name available to all loggers all the time.
Almost. There are some caveats are testing that I'll get to. But in
*production* code the node name is node available to all loggers. This
means we can stop using the "class and settings" variants to fetch
loggers which was the real goal here, but a pleasant side effect is that
the ndoe name is now consitent on every log line and optional by editing
the logging pattern. This is all powered by setting the node name
statically on a logging formatter very early in initialization.
Now to tests: tests can't set the node name statically because
subclasses of `ESIntegTestCase` run many nodes in the same jvm, even in
the same class loader. Also, lots of tests don't run with a real node so
they don't *have* a node name at all. To support multiple nodes in the
same JVM tests suss out the node name from the thread name which works
surprisingly well and easy to test in a nice way. For those threads
that are not part of an `ESIntegTestCase` node we stick whatever useful
information we can get form the thread name in the place of the node
name. This allows us to keep the logger format consistent.
This recreates a test that was added to the bats packaging tests
in #31343 but didn't make it over to the java project during when the
linux package tests were ported in #31943
When packages are installed but can not locate the java executable, they
should fail with a descriptive message
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `qa/full-cluster-restart` project to use the new
versions.
It also fixes a small bug in the test for explain on the `_all` field
that was causing it to not properly invoke `_explain`.
* Remove BouncyCastle dependency from runtime
This commit introduces a new gradle project that contains
the classes that have a dependency on BouncyCastle. For
the default distribution, It builds a jar from those and
in puts it in a subdirectory of lib
(/tools/security-cli) along with the BouncyCastle jars.
This directory is then passed in the
ES_ADDITIONAL_CLASSPATH_DIRECTORIES of the CLI tools
that use these classes.
BouncyCastle is removed as a runtime dependency (remains
as a compileOnly one) from x-pack core and x-pack security.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `qa/rolling-upgrade` project to use the new
versions.
Add packaging tests for the linux package distributions to the java test
project and remove them from bats. Most of the tests that lived in
30_deb_package.bats and 40_rpm_package.bats are applicable to both
package types and are combined into a single type of test case. Others
are separated out into separate cases to make their intent more clear
For #26741
Use the randomized runner from the test framework and add some basic
logging to make the packaging tests behave more similarly to how we use
junit in the rest of the project
We have been encountering name mismatches between API defined in our
REST spec and method names that have been added to the high-level REST
client. We should check this automatically to prevent furher mismatches,
and correct all the current ones.
This commit adds a test for this and corrects the issues found by it.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes most of the calls not in X-Pack to their new versions.
The `:x-pack:protocol` project is an implementation detail shared by the
xpack projects and the high level rest client and really doesn't deserve
its own maven coordinants and published javadoc. This change bundles
`:x-pack:protocol` into the high level rest client.
Relates to #29827
Recreates the rest of the bats packaging tests for the tar distribution
in the java packaging test project, with support for both tar and zip
packaging, both oss and default flavors, and on Linux and Windows. Most
tests are followed fairly closely, some have either been dropped if
unnecessary or folded into others if convenient.
So the issue here is that we want to avoid setting vm.max_map_count if
it is already equal to the desired value (the bootstrap check requires
262144). The reason we want to avoid this is because in some use-cases
using sysctl to set this will fail. In this case, we want to enable
users to set this value externally and then allow that to cause using
sysctl to set the value to be skipped so that cases where using sysctl
will fail to no longer fail.
Merges the `query-builder-bwc` qa project into the
`full-cluster-restart` qa project, saving a cluster starts on every
build and *many* cluster starts on `./gradlew bwcTests`.
This creates a YAML test "features" that indices if the cluster being
tested has xpack installed (`xpack`) or if it does *not* have xpack
installed (`no_xpack`). It uses those features to centralize skipping
a few tests that fail if xpack is installed.
The plan is to use this in a followup to skip docs tests that require
xpack when xpack is not installed. We *plan* to use the declaration
of required license level on the docs page to generate the required
`skip`.
Closes#30933.
The package installation relies on java being in the path. If java is
not in the path, the tests fail at post-install time. This commit adds a
pre-install check to validate that java exists, and if it fails, the
package is never installed, and thus keeps a system clean, rather than
aborting at post-install and leaving behind a mess.
Closes#29665
Although the master branch does not affect by #31482, it's helpful to
have BWC tests that verify the peer recovery with a synced-flush index.
This commit adds the bwc tests from #31506 to the master branch.
Relates #31482
Relates #31506
TransportRequestHandler currently contains 2 messageReceived methods,
one which takes a Task, and one that does not. The first just delegates
to the second. This commit changes all existing implementors of
TransportRequestHandler to implement the version which takes Task, thus
allowing the class to be a functional interface, and eliminating the
need to throw exceptions when a task needs to be ensured.
This change moves tests in `smoke-test-rank-eval-with-mustache` into the main
ranking evaluation module by declaring that the integration testing cluster
requires the `lang-mustache` plugin. This avoids having to maintain the qa
project for only one basic test suite.
This commit modifies the Sys V init startup scripts to only modify
vm.max_map_count if needed. In this case, needed means that the current
value is less than our default value of 262144 maps.
If you run `./gradlew -p qa bwcTest -Dtests.distribution=zip` then we
need to resolve older versions of the default distribution. Since those
aren't available in maven central, we need add the elastic maven repo to
the project.
Jason Tedor
Igor Motov
Nhat Nguyen
Nik Everett
Jim Ferenczi
Alpar Torok
Armin Braun
Ioannis Kakavas
David Roberts
David Turner
Andy Bristol
David Kyle
Luca Cavanna
Ben Abrams
Michael Basnight
Ryan Ernst
Christoph Büscher