Adjust list of dynamic index settings that should be replicated
and added a test that verifies whether builtin dynamic index settings
are classified as replicated or non replicated (whitelisted).
This commit uses the index settings version so that a follower can
replicate index settings changes as needed from the leader.
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
There is no longer a concept of non-global "realm settings". All realm
settings should be loaded from the node's settings using standard
Setting classes.
This change renames the "globalSettings" field and method to simply be
"settings".
The file realm has not supported custom filenames/locations since at
least 5.0, but this test still tried to configure them.
Remove all configuration of file locations, and cleaned up a few other
warnings and deprecations
Ensure that Watcher is correctly started and stopped between tests for
SmokeTestWatcherWithSecurityIT,
SmokeTestWatcherWithSecurityClientYamlTestSuiteIT,
SmokeTestWatcherTestSuiteIT, WatcherRestIT,
XDocsClientYamlTestSuiteIT, and XPackRestIT
The change here is to throw an `AssertionError` instead of `break;` to
allow the `assertBusy()` to continue to busy wait until the desired
state is reached.
closes#33291, closes#29877, closes#34462, closes#30705, closes#34448
Since it's still possible to shrink an index when replicas are unassigned, we
should not check that all copies are available when performing the shrink, since
we set the allocation requirement for a single node.
Resolves#35321
* [ILM] Check shard and relocation status in AllocationRoutedStep
This is a follow-up from #35161 where we now check for started and relocating
state in `AllocationRoutedStep`.
Resolves#35258
This change adds a `frozen` engine that allows lazily open a directory reader
on a read-only shard. The engine wraps general purpose searchers in a LazyDirectoryReader
that also allows to release and reset the underlying index readers after any and before
secondary search phases.
Relates to #34352
An auto follow pattern:
* cannot start with `_`
* cannot contain a `,`
* can be encoded in UTF-8
* the length of UTF-8 encoded bytes is no longer than 255 bytes
Adds basic rolling upgrade tests to check that lifecycles are still recognizable between rolling cluster upgrades and managed indices stay managed.
This is a placeholder for discussing types of checks so they are ready once we backported
This is a re-boot of the previous PR against index-lifecycle that needed to be
reverted due to CI bwc issues. #32828
With this change, `Version` no longer carries information about the qualifier,
we still need a way to show the "display version" that does have both
qualifier and snapshot. This is now stored by the build and red from `META-INF`.
Grammar's identifiers can be completely skipped from counting depths
as they just add another level to the tree and they are always children
of some other expression which gets counted.
Increased maximum depth from 100 to 200. After testing on production
configuration with -Xss1m, depths of at least 250 can be used, so being
conservative we put the limit lower.
Fixes: #35299
The elasticsearch-croneval CLI tool uses local dates to display when
something gets triggered the next time. This is very confusing.
This commit ensures, that UTC and local timezone times will be written
out.
The output looks like this and contains localized dates for each trigger
date as well as for `now`.
Now is [Tue, 28 Aug 2018 17:23:51 +0000] in UTC, local time is [ᏔᎵᏁ, 28 ᎦᎶ 2018 12:23:51 -0500]
Here are the next 10 times this cron expression will trigger:
1. Mon, 2 Jan 2040 11:00:00 +0000
ᏉᏅᎯ, 2 ᎤᏃ 2040 06:00:00 -0500
2. ...
This also removes an old outstanding TODO to use the jopt parsing to
cast the count to an integer instead of doing it ourselves.
In order to start shard follow tasks, the resume follow api already
needs execute N requests to the elected master node.
The pause follow API is also a master node action, which would make
how both APIs execute more consistent.
This is related to #29023. Additionally at other points we have
discussed a preference for removing the need to unnecessarily block
threads for opening new node connections. This commit lays the groudwork
for this by opening connections asynchronously at the transport level.
We still block, however, this work will make it possible to eventually
remove all blocking on new connections out of the TransportService
and Transport.
The remove-ilm-from-index API was using the DELETE http method
to signify that something is being removed. Although, metadata
about ILM for the index is being deleted, no entity/resource
is being deleted during this operation. POST is more in line with
what this API is actually doing, it is modifying the metadata for
an index. As part of this change, `remove` is also appended to the path
to be more explicit about its actions.
Error was thrown if leader index had no soft deletes enabled, but it then continued creating the follower index.
The test caught this bug, but very rarely due to timing issue.
Build failure instance:
```
1> [2018-11-05T20:29:38,597][INFO ][o.e.x.c.LocalIndexFollowingIT] [testDoNotCreateFollowerIfLeaderDoesNotHaveSoftDeletes] before test
1> [2018-11-05T20:29:38,599][INFO ][o.e.c.s.ClusterSettings ] [node_s_0] updating [cluster.remote.local.seeds] from [[]] to [["127.0.0.1:9300"]]
1> [2018-11-05T20:29:38,599][INFO ][o.e.c.s.ClusterSettings ] [node_s_0] updating [cluster.remote.local.seeds] from [[]] to [["127.0.0.1:9300"]]
1> [2018-11-05T20:29:38,609][INFO ][o.e.c.m.MetaDataCreateIndexService] [node_s_0] [leader-index] creating index, cause [api], templates [random-soft-deletes-templat
e, one_shard_index_template], shards [2]/[0], mappings []
1> [2018-11-05T20:29:38,628][INFO ][o.e.c.r.a.AllocationService] [node_s_0] Cluster health status changed from [YELLOW] to [GREEN] (reason: [shards started [[leader-
index][0]] ...]).
1> [2018-11-05T20:29:38,660][INFO ][o.e.x.c.a.TransportPutFollowAction] [node_s_0] [follower-index] creating index, cause [ccr_create_and_follow], shards [2]/[0]
1> [2018-11-05T20:29:38,675][INFO ][o.e.c.s.ClusterSettings ] [node_s_0] updating [cluster.remote.local.seeds] from [["127.0.0.1:9300"]] to [[]]
1> [2018-11-05T20:29:38,676][INFO ][o.e.c.s.ClusterSettings ] [node_s_0] updating [cluster.remote.local.seeds] from [["127.0.0.1:9300"]] to [[]]
1> [2018-11-05T20:29:38,678][INFO ][o.e.x.c.LocalIndexFollowingIT] [testDoNotCreateFollowerIfLeaderDoesNotHaveSoftDeletes] after test
1> [2018-11-05T20:29:38,678][INFO ][o.e.x.c.LocalIndexFollowingIT] [testDoNotCreateFollowerIfLeaderDoesNotHaveSoftDeletes] [LocalIndexFollowingIT#testDoNotCreateFoll
owerIfLeaderDoesNotHaveSoftDeletes]: cleaning up after test
1> [2018-11-05T20:29:38,678][INFO ][o.e.c.m.MetaDataDeleteIndexService] [node_s_0] [follower-index/TlWlXp0JSVasju2Kr_hksQ] deleting index
1> [2018-11-05T20:29:38,678][INFO ][o.e.c.m.MetaDataDeleteIndexService] [node_s_0] [leader-index/FQ6EwIWcRAKD8qvOg2eS8g] deleting index
FAILURE 0.23s J0 | LocalIndexFollowingIT.testDoNotCreateFollowerIfLeaderDoesNotHaveSoftDeletes <<< FAILURES!
> Throwable #1: java.lang.AssertionError:
> Expected: <false>
> but: was <true>
> at __randomizedtesting.SeedInfo.seed([7A3C89DA3BCA17DD:65C26CBF6FEF0B39]:0)
> at org.hamcrest.MatcherAssert.assertThat(MatcherAssert.java:20)
> at org.elasticsearch.xpack.ccr.LocalIndexFollowingIT.testDoNotCreateFollowerIfLeaderDoesNotHaveSoftDeletes(LocalIndexFollowingIT.java:83)
> at java.lang.Thread.run(Thread.java:748)
```
Build failure: https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+6.5+intake/46/console
Override `process()` in `BinaryLogicProcessor` which doesn't immediately
return null if left or right argument is null, which is the behaviour of
`process()` of the parent class `BinaryProcessor`.
Also, add more tests for `AND` and `OR` in SELECT clause with literal.
Fixes: #35240
Today if a wildcard, date-math expression or alias expands/resolves
to an index that is search-throttled we still search it. This is likely
not the desired behavior since it can unexpectedly slow down searches
significantly.
This change adds a new indices option that allows `search`, `count`
and `msearch` to ignore throttled indices by default. Users can
force expansion to throttled indices by using `ignore_throttled=true`
on the rest request to expand also to throttled indices.
Relates to #34352
This moves all Realm settings to an Affix definition.
However, because different realm types define different settings
(potentially conflicting settings) this requires that the realm type
become part of the setting key.
Thus, we now need to define realm settings as:
xpack.security.authc.realms:
file.file1:
order: 0
native.native1:
order: 1
- This is a breaking change to realm config
- This is also a breaking change to custom security realms (SecurityExtension)
This is a forward port of some of the changes made in #8445, specifically the change mentioned in https://github.com/elastic/elasticsearch/pull/34023#issuecomment-433212636.
Currently, in master, the `cluster_stats` collector collects _all_ cluster metadata and indexes it into `.monitoring-es-*`. However, per the discussion linked to above, we decided to collect _only_ the `display_name` cluster metadata setting for now. This PR makes this change.
Add NotEquals node in parser to simplify expressions so that <value1> != <value2> is
no longer translated internally to NOT(<value1> = <value2>)
Closes: #35210Fixes: #35233
This adds a new step for checking whether an index is allocated correctly based
on the rules added prior to running the shrink step. It also fixes a bug where
for shrink we are not allowed to have the shards relocating for the shrink step.
This also allows us to simplify AllocationRoutedStep and provide better
feedback in the step info for why either the allocation or the shrink checks
have failed.
Resolves#34938
If the Rollover step would fail due to the next index in sequence
already existing, just skip to the next step instead of going to the
Error step.
This prevents spurious `ResourceAlreadyExistsException`s created by
simultaneous RolloverStep executions from causing ILM to error out
unnecessarily.
This commit removes the Joda time usage from ILM and the HLRC components of ILM.
It also fixes an issue where using the `?human=true` flag could have caused the
parser not to work. These millisecond fields now follow the standard we use
elsewhere in the code, with additional fields added iff the `human` flag is
specified.
This is a breaking change for ILM, but since ILM has not yet been released, no
compatibility shim is needed.
The suite FollowerFailOverIT is failing because some documents are not
replicated to the follower. Maybe the FollowTask is not working as
expected or the background indexers eat all resources while the follower
cluster is trying to reform after a failover; then CI is not fast enough
to replicate all the indexed docs within 60 seconds (sometimes I see 80k
docs on the leader).
This commit limits the number of documents to be indexed into the leader
index by the background threads so that we can eliminate the latter
case. This change also replaces a docCount assertion with a docIds
assertion so we can have more information if these tests fail again.
Relates #33337
Previously, testRunStateChangePolicyWithNextStep asserted that the
ClusterState before and after running the steps were equal. The test
only passed due to a race condition: The latch would be triggered by the
step execution, but the cluster state update thread would continue
running before committing the change to the cluster state. This allowed
the test to read the old cluster state and pass the equality check about
99.99% of the time.
The test now waits for the new cluster state to be committed before
checking that it is _not_ equal to the old cluster state.
Include `null` literals when generating the painless script for `IN` expressions.
Previously, they were skipped, because of an issue that had been fixed with #35108.
Fixes: #35122
Fixes
```
Could not determine the dependencies of task ':x-pack:qa:full-cluster-restart:with-system-key:v5.6.13#oldClusterTestCluster#node1.copyBwcPlugins'.
```
Only the response classes of get auto follow pattern, the follow and stats APIs
were moved away from Streamable. The other APIs use `AcknowledgedResponse`
or `BaseTasksResponse` as response class and
moving that class away from Streamable is a bigger change.
ILM's Shrink Action was using a nodes "_name" attribute to
allocate to prepare for the shrink step. Since the name is
configurable by a user and may use the same name for
multiple nodes on one machine, _id is safer since it is guaranteed
to be unique.
closes#35043.
* Adding rollup support for datafeeds
* Fixing tests and adjusting formatting
* minor formatting chagne
* fixing some syntax and removing redundancies
* Refactoring and fixing failing test
* Refactoring, adding paranoid null check
* Moving rollup into the aggregation package
* making AggregationToJsonProcessor package private again
* Addressing test failure
* Fixing validations, chunking
* Addressing failing test
* rolling back RollupJobCaps changes
* Adding comment and cleaning up test
* Addressing review comments and test failures
* Moving builder logic into separate methods
* Addressing PR comments, adding test for rollup permissions
* Fixing test failure
* Adding rollup priv check on datafeed put
* Handling missing index when getting caps
* Fixing unused import
* Watcher: fix metric stats names
The current watcher stats metric names doesn't match the current
documentation. This commit fixes the behavior of `queued_watches`
metric, deprecates `pending_watches` metric and adds `current_watches`
to match the documented behavior. It also fixes the documentation, which
introduced `executing_watches` metric that was never added.
Fixes#34865
Replace standard `||` and `==` painless operators with
new `in` method introduced in `InternalSqlScriptUtils`.
This allows the list of values to become a script variable
which is replaced each time with the list of values provided
by the user.
Move In to the same package as InPipe & InProcessor
Follow up to #34750
Co-authored-by: Costin Leau <costin.leau@gmail.com>
Stop passing `Settings` to `AbstractComponent`'s ctor. This allows us to
stop passing around `Settings` in a *ton* of places. While this change
touches many files, it touches them all in fairly small, mechanical
ways, doing a few things per file:
1. Drop the `super(settings);` line on everything that extends
`AbstractComponent`.
2. Drop the `settings` argument to the ctor if it is no longer used.
3. If the file doesn't use `logger` then drop `extends
AbstractComponent` from it.
4. Clean up all compilation failure caused by the `settings` removal
and drop any now unused `settings` isntances and method arguments.
I've intentionally *not* removed the `settings` argument from a few
files:
1. TransportAction
2. AbstractLifecycleComponent
3. BaseRestHandler
These files don't *need* `settings` either, but this change is large
enough as is.
Relates to #34488
Today when ESIntegTestCase starts some nodes it writes out the unicast hosts
files each time a node starts its transport service. This does mean that a
number of nodes can start and perform their first pinging round without any
unicast hosts which, if the timing is unlucky and a lot of nodes are all
started at the same time, can lead to a split brain as in #35052.
Prior to #33554 this was unlikely to happen since the MockUncasedHostsProvider
would always have yielded the existing hosts, so the timing would have to have
been implausibly unlucky. Since #33554, however, it's more likely because the
race occurs between the start of the first round of pinging and the writing of
the unicast hosts file. It is realistic that new nodes will be configured with
the existing nodes from startup, so this change reinstates that behaviour.
Closes#35052.
This commit does a few things
- moves ILM-specifc rest yaml tests into plugin/ilm/qa, and creates special
:plugin:ilm:qa:rest module to test them
- removes the with-security tests of the yaml tests since they are covered in
the rest tests now
- moves ChangePolicyforIndexIT into the qa/multi-node project since that test is
not currently running in main ilm since integTest is disabled
The java yaml test runner supports sending request headers, yet not all clients support headers. This commit makes sure that we enforce adding a skip section with feature "headers" whenever headers are used in a do section as part of a test. That decreases the chance for new tests to break client builds due to the missing skip section.
Closes#34650
The ILM Rollover Step can execute on the incorrect index if the rollover alias
exists on another valid index, but not the one the step is executing against. This
is a problem and is now guarded against
This PR renames the CRUD APIS for ILM
GET _ilm/<policy>, _ilm -> _ilm/policy/<policy>, _ilm/policy
PUT _ilm/<policy> -> _ilm/policy/<policy>
DELETE _ilm/<policy> -> _ilm/policy/<policy>
closes#34929.
Drops the `Settings` member from `AbstractComponent`, moving it from the
base class on to the classes that use it. For the most part this is a
mechanical change that doesn't drop `Settings` accesses. The one
exception to this is naming threads where it switches from an invocation
that passes `Settings` and extracts the node name to one that explicitly
passes the node name.
This change doesn't drop the `Settings` argument from
`AbstractComponent`'s ctor because this change is big enough as is.
We'll do that in a follow up change.
The native roles store previously would issue a search if attempting to
retrieve more than a single role. This is fine when we are attempting
to retrieve all of the roles to list them in the api, but could cause
issues when attempting to find roles for a user. The search is not
prioritized over other search requests, so heavy aggregations/searches
or overloaded nodes could cause roles to be cached as missing if the
search is rejected.
When attempting to load specific roles, we know the document id for the
role that we are trying to load, which allows us to use the multi-get
api for loading these roles. This change makes use of the multi-get api
when attempting to load more than one role by name. This api is also
constrained by a threadpool but the tasks in the GET threadpool should
be quicker than searches.
See #33205
Previously, if ClusterStateActionSteps or ClusterStateWaitSteps threw an
exception executing, the exception would only be caught and logged by
the generic ClusterStateUpdateTask machinery and the index would become
stuck on that step.
Now, exceptions thrown in these steps will be caught and the index will
be moved to the Error step.
Move `x-pack/qa/smoke-test-graph-with-security` to
`x-pack/plugin/graph/qa/security` which should make it easier to run all
of the tests with a single command. It also lines up the directories
more closely with newer projects like cross cluster replication.
Moves `x-pack/qa/sql/*` into `x-pack/plugin/sql/qa` to make it simpler
to run all of the sql tests. This lines up with how newer projects like
cross cluster replication are testing themselves.
This commit filters out usage of deprecated tzs by tests. These are
tested separately and should not require checking for warnings on any
test using random timezones.
closes#34188
This changes the RollupSearch endpoint to proactively resolve index
patterns. If the index pattern(s) match more than one rollup index,
an exception is throw as before. But if the pattern only matches one
rollup index, execution is allowed to continue (unlike before where
it would assume all patterns were for raw data).
This also allows the search endpoint to resolve aliases that point to
a rollup index.
Also tweaks the documentation to make this clear.
Closes#34828
Only the follow stats request couldn't be changed to use Writeable serialization,
because that requires changes in `TransportTasksAction` and `BaseTasksRequest` base classes.
Sometimes the cluster forming here will split-brain when it grows up to 5
nodes. This could be a timing issue or could be something going wrong in
discovery, so this asks for more logs. Relates #35052
The Move To Step API now checks to see if the target step is an
AsyncActionStep, and if so, runs it.
Previously, AsyncActionSteps would only be run when they are entered by
executing the previous step, so if an AsyncActionStep was entered via
the Move To Step API, ILM would never touch that index again.
This commit fixes two issues with the CCR API specification:
- remove the CCR stats endpoint, it is not currently implemented
- fix the documentation links
Extract data type verification for function arguments to a single place
so that NULL type can be treated as RESOLVED for all functions. Moreover
this enables to have consistent verification error messages for all functions.
Fixes: #34752Fixes: #33469
The file structure finder endpoint can find the NDJSON
(newline-delimited JSON) file format, but called it
`json`. This change renames the `format` for this file
structure to `ndjson`, which is more precise and will
hopefully avoid confusion.
* Changed the auto follow stats to also include follow stats.
* Renamed the auto follow stats api to stats api and changed its url path
from `/_ccr/auto_follow/stats` `/_ccr/stats`.
* Removed `/_ccr/stats` url path for the follow stats api, which makes
the index parameter a required parameter.
* Fixed docs.
SSLTrustRestrictionsTests.testRestrictionsAreReloaded checks that the
SSL trust configuration is automatically updated reapplied if the
underlying "trust_restrictions.yml" file is modified.
Since the default resource watcher frequency is 5seconds, it could
take 10 second to run that test (as it waits for 2 reloaded).
Previously this test set that frequency to a very low value (3ms) so
that the elapsed time for the test would be reduced. However this
caused other problems, including that the resource watcher would
frequently run while the cluster was shutting down and files were
being cleaned up.
This change resets that watch frequency back to its default (5s) and
then manually calls the "notifyNow" method on the resource watcher
whenever the restrictions file is modified, so that the SSL trust
configuration is reloaded at exactly the right time.
Resolves: #34502
Drops the `deprecationLogger` from `AbstractComponent`, moving it to
places where we need it. This saves us from building a bunch of
`DeprecationLogger`s that we don't need.
Relates to #34488
`AbstractComponent` is trouble because its name implies that
*everything* should extend from it. It *is* useful, but maybe too
broadly useful. The things it offers access too, the `Settings` instance
for the entire server and a logger are nice to have around, but not
really needed *everywhere*. The `Settings` instance especially adds a
fair bit of ceremony to testing without any value.
This removes the `nodeName` method from `AbstractComponent` so it is
more clear where we actually need the node name.
In order to remove Streamable from the codebase, Response objects need
to be read using the Writeable.Reader interface which this change
enables. This change enables the use of Writeable.Reader by adding the
`Action#getResponseReader` method. The default implementation simply
uses the existing `newResponse` method and the readFrom method. As
responses are migrated to the Writeable.Reader interface, Action
classes can be updated to throw an UnsupportedOperationException when
`newResponse` is called and override the `getResponseReader` method.
Relates #34389
We currently have two different native processes:
autodetect & normalizer. There are plans for introducing
a new process. All these share many things in common.
This commit refactors the processes to extend an
`AbstractNativeProcess` class that encapsulates those
commonalities with the purpose of reusing the code
for new processes in the future.
Index shard stats for the follower shard are fetched, when a shard follow task is started.
This is needed in order to bootstap the shard follow task with the follower global checkpoint.
Sometimes index shard stats are not available (e.g. during a restart) and
we fail now, while it is very likely that these stats will be available some time later.
Documents the new structured logfile format for auditing
that was introduced by #31931. Most changes herein
are for 6.x . In 7.0 the deprecated format is gone and a
follow-up PR is in order.
This change ensures the `message` field is always included
in the `field_stats` for the semi-structured text log file
file structure. Previously it was not, as it will almost
certainly contain all distinct values. However, for
consistency in the UI it's useful to include it.
After discussing on the team's FixItFriday, we concluded that
static final instance variables that are mutable should be lowercased.
Historically, DeprecationLogger was uppercased more frequently than lowercased.
ILM would return a resource-not-found exception when requesting policies
while the IndexLifecycleMetaData is not initialized. The behavior here
should not be as extreme since it is not the user's fault.
This commit changes the behavior so that it succeeds and returns no policies
when no policy names are explicitely specified, otherwise keep the same behavior
of throwing an exception
Previously, for some queries the validation for ORDER BY
fields didn't kick in since a HAVING close or an ORDER BY
with scalar function would add `Filter` and `Project` plans
between the `OrderBy` and the `Aggregate`.
Now the LogicalPlan tree beneath `OrderBy` is traversed and
the ORDER BY fields are properly verified.
Fixes: #34590
This is related to #30876. The AbstractSimpleTransportTestCase initiates
many tcp connections. There are normally over 1,000 connections in
TIME_WAIT at the end of the test. This is because every test opens at
least two different transports that connect to each other with 13
channel connection profiles. This commit modifies the default
connection profile used by this test to 6. One connection for each
type, except for REG which gets 2 connections.
With the introduction of _ilm/stop and _ilm/start APIs, the
use cases where one would only target a select group
of indices to start/stop has been reduced. Since there is no
strong use-case for skipping specific indices, it is best to
remove this functionality and only adding if later desired, with the
hopes of keeping things more simple.
through randomization, there is a chance that the mutateInstance
for PolicyStatsTests does not actually mutate the original object.
This PR aims to fix this
* NETWORKING: Add SSL Handler before other Handlers
* The only way to run into the issue in #33998 is for `Netty4MessageChannelHandler`
to be in the pipeline while the SslHandler is not. Adding the SslHandler before any
other handlers should ensure correct ordering here even when we handle upstream events
in our own thread pool
* Ensure that channels that were closed concurrently don't trip the assertion
* Closes#33998
The contains syntax was added in #30874 but the skips were not properly
put in place.
The java runner has the feature so the tests will run as part of the
build, but language clients will be able to support it at their own
pace.
This limit is based on the size in bytes of the operations in the write buffer. If this limit is exceeded then no more read operations will be coordinated until the size in bytes of the write buffer has dropped below the configured write buffer size limit.
Renamed existing `max_write_buffer_size` to ``max_write_buffer_count` to indicate that limit is count based.
Closes#34705
Tim Vernum
Martijn van Groningen
Jason Tedor
Tim Vernum
Jake Landis
Lee Hinman
Simon Willnauer
Tal Levy
Benjamin Trent
Alpar Torok
Marios Trivyzas
Alexander Reelsen
Tim Brooks
Andrei Stefan
Costin Leau
Nick Knize
Shaunak Kashyap
Nik Everett
Gordon Brown
David Kyle
Nhat Nguyen
Jay Modi
Alan Woodward
Colin Goodheart-Smithe
Igor Motov
David Turner
Vladimir Dolzhenko
Luca Cavanna
Dimitris Athanasiou
Ryan Ernst
Zachary Tong
Pratik Sanglikar
David Roberts
Lee Hinman
Albert Zaharovits
Armin Braun
Andrey Atapin