Today we have an annotation for controlling logging levels in
tests. This annotation serves two purposes, one is to control the
logging level used in tests, when such control is needed to impact and
assert the behavior of loggers in tests. The other use is when a test is
failing and additional logging is needed. This commit separates these
two concerns into separate annotations.
The primary motivation for this is that we have a history of leaving
behind the annotation for the purpose of investigating test failures
long after the test failure is resolved. The accumulation of these stale
logging annotations has led to excessive disk consumption. Having
recently cleaned this up, we would like to avoid falling into this state
again. To do this, we are adding a link to the test failure under
investigation to the annotation when used for the purpose of
investigating test failures. We will add tooling to inspect these
annotations, in the same way that we have tooling on awaits fix
annotations. This will enable us to report on the use of these
annotations, and report when stale uses of the annotation exist.
Large histories can be problematic and have the linearizability checker occasionally run OOM. As it's
very difficult to bound the size of the histories just right, this PR will let it instead run for 10 seconds
on large histories and then abort.
Closes#44429
* We only use this method in one place in production code and can replace that with a read -> remove it to simplify the interface
* Keep it as an implementation detail in the Azure repository
Registering a channel with a selector is a required operation for the
channel to be handled properly. Currently, we mix the registeration with
other setup operations (ip filtering, SSL initiation, etc). However, a
fail to register is fatal. This PR modifies how registeration occurs to
immediately close the channel if it fails.
There are still two clear loopholes for how a user can interact with a
channel even if registration fails. 1. through the exception handler.
2. through the channel accepted callback. These can perhaps be improved
in the future. For now, this PR prevents writes from proceeding if the
channel is not registered.
* Add Snapshot Lifecycle Management (#43934)
* Add SnapshotLifecycleService and related CRUD APIs
This commit adds `SnapshotLifecycleService` as a new service under the ilm
plugin. This service handles snapshot lifecycle policies by scheduling based on
the policies defined schedule.
This also includes the get, put, and delete APIs for these policies
Relates to #38461
* Make scheduledJobIds return an immutable set
* Use Object.equals for SnapshotLifecyclePolicy
* Remove unneeded TODO
* Implement ToXContentFragment on SnapshotLifecyclePolicyItem
* Copy contents of the scheduledJobIds
* Handle snapshot lifecycle policy updates and deletions (#40062)
(Note this is a PR against the `snapshot-lifecycle-management` feature branch)
This adds logic to `SnapshotLifecycleService` to handle updates and deletes for
snapshot policies. Policies with incremented versions have the old policy
cancelled and the new one scheduled. Deleted policies have their schedules
cancelled when they are no longer present in the cluster state metadata.
Relates to #38461
* Take a snapshot for the policy when the SLM policy is triggered (#40383)
(This is a PR for the `snapshot-lifecycle-management` branch)
This commit fills in `SnapshotLifecycleTask` to actually perform the
snapshotting when the policy is triggered. Currently there is no handling of the
results (other than logging) as that will be added in subsequent work.
This also adds unit tests and an integration test that schedules a policy and
ensures that a snapshot is correctly taken.
Relates to #38461
* Record most recent snapshot policy success/failure (#40619)
Keeping a record of the results of the successes and failures will aid
troubleshooting of policies and make users more confident that their
snapshots are being taken as expected.
This is the first step toward writing history in a more permanent
fashion.
* Validate snapshot lifecycle policies (#40654)
(This is a PR against the `snapshot-lifecycle-management` branch)
With the commit, we now validate the content of snapshot lifecycle policies when
the policy is being created or updated. This checks for the validity of the id,
name, schedule, and repository. Additionally, cluster state is checked to ensure
that the repository exists prior to the lifecycle being added to the cluster
state.
Part of #38461
* Hook SLM into ILM's start and stop APIs (#40871)
(This pull request is for the `snapshot-lifecycle-management` branch)
This change allows the existing `/_ilm/stop` and `/_ilm/start` APIs to also
manage snapshot lifecycle scheduling. When ILM is stopped all scheduled jobs are
cancelled.
Relates to #38461
* Add tests for SnapshotLifecyclePolicyItem (#40912)
Adds serialization tests for SnapshotLifecyclePolicyItem.
* Fix improper import in build.gradle after master merge
* Add human readable version of modified date for snapshot lifecycle policy (#41035)
* Add human readable version of modified date for snapshot lifecycle policy
This small change changes it from:
```
...
"modified_date": 1554843903242,
...
```
To
```
...
"modified_date" : "2019-04-09T21:05:03.242Z",
"modified_date_millis" : 1554843903242,
...
```
Including the `"modified_date"` field when the `?human` field is used.
Relates to #38461
* Fix test
* Add API to execute SLM policy on demand (#41038)
This commit adds the ability to perform a snapshot on demand for a policy. This
can be useful to take a snapshot immediately prior to performing some sort of
maintenance.
```json
PUT /_ilm/snapshot/<policy>/_execute
```
And it returns the response with the generated snapshot name:
```json
{
"snapshot_name" : "production-snap-2019.04.09-rfyv3j9qreixkdbnfuw0ug"
}
```
Note that this does not allow waiting for the snapshot, and the snapshot could
still fail. It *does* record this information into the cluster state similar to
a regularly trigged SLM job.
Relates to #38461
* Add next_execution to SLM policy metadata (#41221)
* Add next_execution to SLM policy metadata
This adds the next time a snapshot lifecycle policy will be executed when
retriving a policy's metadata, for example:
```json
GET /_ilm/snapshot?human
{
"production" : {
"version" : 1,
"modified_date" : "2019-04-15T21:16:21.865Z",
"modified_date_millis" : 1555362981865,
"policy" : {
"name" : "<production-snap-{now/d}>",
"schedule" : "*/30 * * * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"foo-*",
"important"
],
"ignore_unavailable" : true,
"include_global_state" : false
}
},
"next_execution" : "2019-04-15T21:16:30.000Z",
"next_execution_millis" : 1555362990000
},
"other" : {
"version" : 1,
"modified_date" : "2019-04-15T21:12:19.959Z",
"modified_date_millis" : 1555362739959,
"policy" : {
"name" : "<other-snap-{now/d}>",
"schedule" : "0 30 2 * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"other"
],
"ignore_unavailable" : false,
"include_global_state" : true
}
},
"next_execution" : "2019-04-16T02:30:00.000Z",
"next_execution_millis" : 1555381800000
}
}
```
Relates to #38461
* Fix and enhance tests
* Figured out how to Cron
* Change SLM endpoint from /_ilm/* to /_slm/* (#41320)
This commit changes the endpoint for snapshot lifecycle management from:
```
GET /_ilm/snapshot/<policy>
```
to:
```
GET /_slm/policy/<policy>
```
It mimics the ILM path only using `slm` instead of `ilm`.
Relates to #38461
* Add initial documentation for SLM (#41510)
* Add initial documentation for SLM
This adds the initial documentation for snapshot lifecycle management.
It also includes the REST spec API json files since they're sort of
documentation.
Relates to #38461
* Add `manage_slm` and `read_slm` roles (#41607)
* Add `manage_slm` and `read_slm` roles
This adds two more built in roles -
`manage_slm` which has permission to perform any of the SLM actions, as well as
stopping, starting, and retrieving the operation status of ILM.
`read_slm` which has permission to retrieve snapshot lifecycle policies as well
as retrieving the operation status of ILM.
Relates to #38461
* Add execute to the test
* Fix ilm -> slm typo in test
* Record SLM history into an index (#41707)
It is useful to have a record of the actions that Snapshot Lifecycle
Management takes, especially for the purposes of alerting when a
snapshot fails or has not been taken successfully for a certain amount of
time.
This adds the infrastructure to record SLM actions into an index that
can be queried at leisure, along with a lifecycle policy so that this
history does not grow without bound.
Additionally,
SLM automatically setting up an index + lifecycle policy leads to
`index_lifecycle` custom metadata in the cluster state, which some of
the ML tests don't know how to deal with due to setting up custom
`NamedXContentRegistry`s. Watcher would cause the same problem, but it
is already disabled (for the same reason).
* High Level Rest Client support for SLM (#41767)
* High Level Rest Client support for SLM
This commit add HLRC support for SLM.
Relates to #38461
* Fill out documentation tests with tags
* Add more callouts and asciidoc for HLRC
* Update javadoc links to real locations
* Add security test testing SLM cluster privileges (#42678)
* Add security test testing SLM cluster privileges
This adds a test to `PermissionsIT` that uses the `manage_slm` and `read_slm`
cluster privileges.
Relates to #38461
* Don't redefine vars
* Add Getting Started Guide for SLM (#42878)
This commit adds a basic Getting Started Guide for SLM.
* Include SLM policy name in Snapshot metadata (#43132)
Keep track of which SLM policy in the metadata field of the Snapshots
taken by SLM. This allows users to more easily understand where the
snapshot came from, and will enable future SLM features such as
retention policies.
* Fix compilation after master merge
* [TEST] Move exception wrapping for devious exception throwing
Fixes an issue where an exception was created from one line and thrown in another.
* Fix SLM for the change to AcknowledgedResponse
* Add Snapshot Lifecycle Management Package Docs (#43535)
* Fix compilation for transport actions now that task is required
* Add a note mentioning the privileges needed for SLM (#43708)
* Add a note mentioning the privileges needed for SLM
This adds a note to the top of the "getting started with SLM"
documentation mentioning that there are two built-in privileges to
assist with creating roles for SLM users and administrators.
Relates to #38461
* Mention that you can create snapshots for indices you can't read
* Fix REST tests for new number of cluster privileges
* Mute testThatNonExistingTemplatesAreAddedImmediately (#43951)
* Fix SnapshotHistoryStoreTests after merge
* Remove overridden newResponse functions that have been removed
* Fix compilation for backport
* Fix get snapshot output parsing in test
* [DOCS] Add redirects for removed autogen anchors (#44380)
* Switch <tt>...</tt> in javadocs for {@code ...}
* Prevent Confusing Blocked Thread Warnings in MockNioTransport
* We can run into a race where the stacktrace collection and subsequent logging happens after the thread has already unblocked thus logging a confusing stacktrace of wherever the transport thread was after it became unblocked
* Fixed this by comparing whether or not the recorded timestamp is still the same before and after the stacktrace was recorded and not logging if it already changed
Today the `BatchedRerouteService` submits its delayed reroute task at `HIGH`
priority, but in some cases a lower priority would be more appropriate. This
commit adds the facility to submit delayed reroute tasks at different
priorities, such that each submitted reroute task runs at a priority no lower
than the one requested. It does not change the fact that all delayed reroute
tasks are submitted at `HIGH` priority, but at least it makes this explicit.
Currently we loose information about whether a token list in an AnalyzeAction
response is null or an empty list, because we write a 0 value to the stream in
both cases and deserialize to a null value on the receiving side. This change
fixes this so we write an additional flag indicating whether the value is null
or not, followed by the size of the list and its content.
Closes#44078
This is a refactor to current JSON logging to make it more open for extensions
and support for custom ES log messages used inDeprecationLogger IndexingSlowLog , SearchSLowLog
We want to include x-opaque-id in deprecation logs. The easiest way to have this as an additional JSON field instead of part of the message is to create a custom DeprecatedMessage (extends ESLogMEssage)
These messages are regular log4j messages with a text, but also carry a map of fields which can then populate the log pattern. The logic for this lives in ESJsonLayout and ESMessageFieldConverter.
Similar approach can be used to refactor IndexingSlowLog and SearchSlowLog JSON logs to contain fields previously only present as escaped JSON string in a message field.
closes#41350
backport #41354
* The assertion added in #44214 is tripped by tests running dedicated
test clusters per test needlessly.This breaks existing tests like the one in #44245.
* Closes#44245
Today if a master-eligible node is converted to a master-ineligible node it may
remain in the voting configuration, meaning that the master node may count its
publish responses as an indication that it has properly persisted the cluster
state. However master-ineligible nodes do not properly persist the cluster
state, so it is not safe to count these votes.
This change adjusts `CoordinationState` to take account of this from a safety
point of view, and also adjusts the `Coordinator` to prevent such nodes from
joining the cluster. Instead, it triggers a reconfiguration to remove from the
voting configuration a node that now appears to be master-ineligible before
processing its join.
Backport of #43688, see #44260.
* Fix port range allocation with large worker IDs
Relates to #43983
The IDs gradle uses are incremented for the lifetime of the daemon which
can result in port ranges that are outside the valid range.
This change implements a modulo based formula to wrap the port ranges
when the IDs get too large.
Adresses #44134 but #44157 is also required to be able to close it.
* Cleans up all root level temp., snap-%s.dat, meta-%s.dat blobs that aren't referenced by any snapshot to deal with dangling blobs left behind by delete and snapshot finalization failures
* The scenario that get's us here is a snapshot failing before it was finalized or a delete failing right after it wrote the updated index-(N+1) that doesn't reference a snapshot anymore but then fails to remove that snapshot
* Not deleting other dangling blobs since that don't follow the snap-, meta- or tempfile naming schemes to not accidentally delete blobs not created by the snapshot logic
* Follow up to #42189
* Same safety logic, get list of all blobs before writing index-N blobs, delete things after index-N blobs was written
* Fix ShrinkIndexIT
* Move this test suit to cluster scope. Currently, `testShrinkThenSplitWithFailedNode` stops a random node which randomly turns out to be the only shared master node so the cluster reset fails on account of the fact that no shared master node survived.
* Closes#44164
Simplifies AbstractSimpleTransportTestCase to use JVM-local ports and also adds an assertion so
that cases like #44134 can be more easily debugged. The likely reason for that one is that a test,
which was repeated again and again while always spawning a fresh Gradle worker (due to Gradle
daemon) kept increasing Gradle worker IDs, causing an overflow at some point.
* Improve Repository Consistency Check in Tests (#44099)
* Check that index metadata as well as snapshot metadata always exists
when referenced by other metadata
* Fix SnapshotResiliencyTests on ExtraFS (#44113)
* As a result of #44099 we're now checking more directories and have to
ignore the `extraN` folders for those like we do for indices already
* Closes#44112
* The incompatible snapshots logic was created to track 1.x snapshots that
became incompatible with 2.x
* It serves no purpose at this point
* It adds an additional GET request to every loading of
RepositoryData (from loading the incompatible snapshots blob)
* Add WARN Logging if Mock Network Accepts Huge Number of Connections
* As discussed, added warn logging to rule out endless accept loops for #43387
* Had to handle it by the relatively awkward override in the mock nio
because we don't have logging in the NIO module where
(`ServerChannelContext` lives)
The base classes for transport requests and responses currently
implement Streamable and Writeable. The writeTo method on these base
classes is implemented with an empty implementation. Not only does this
complicate subclasses to think they need to call super.writeTo, but it
also can lead to not implementing writeTo when it should have been
implemented, or extendiong one of these classes when not necessary,
since there is nothing to actually implement.
This commit removes the empty writeTo from these base classes, and fixes
subclasses to not call super and in some cases implement an empty
writeTo themselves.
relates #34389
AggregatorFactory was generic over itself, but it doesn't appear we
use this functionality anywhere (e.g. to allow the super class
to declare arguments/return types generically for subclasses to
override). Most places use a wildcard constraint, and even when a
concrete type is specified it wasn't used.
But since AggFactories are widely used, this led to
the generic touching many pieces of code and making type signatures
fairly complex
Today the `ClusterInfoService` requires the `DiskThresholdMonitor` at
construction time so that it can notify it when nodes report changes in their
disk usage, but this is awkward to construct: the `DiskThresholdMonitor`
requires a `RerouteService` which requires an `AllocationService` which comees
from the `ClusterModule` which requires the `ClusterInfoService`.
Today we break the cycle with a `LazilyInitializedRerouteService` which is
itself a little ugly. This commit replaces this with a more traditional
subject/observer relationship between the `ClusterInfoService` and the
`DiskThresholdMonitor`.
Since #42636 we no longer treat connections specially when simulating a
blackholed connection. This means that at the end of the safety phase we may
have just started a connection attempt which will time out, but the default
timeout is 30 seconds, much longer than the 2 seconds we normally allow for
post-safety-phase discovery. This commit adds time for such a connection
attempt to time out.
It also fixes some spurious logging of `this` that now refers to an object with
an unhelpful `toString()` implementation introduced in #42636.
Fixes#44073
In today's test suite indices mostly use the default value of `12h` for the
`index.soft_deletes.retention_lease.period` setting, which in the context of
the test suite essentially means "never expires". In fact, the tests should all
behave correctly even if the lease period is much shorter; tests that rely on
leases not expiring should configure their indices appropriately.
This commit randomises the lease expiry time for those indices created during
tests which do not set a specific value for this setting.
* Remove some obvious dead code
* Move assert methods that were only used in a single test class to the child they belong to
* Inline some redundant methods
* Use ability to list child "folders" in the blob store to implement recursive delete on all stale index folders when cleaning up instead of using the diff between two `RepositoryData` instances to cover aborted deletes
* Runs after ever delete operation
* Relates #13159 (fixing most of this issues caused by unreferenced indices, leaving some meta files to be cleaned up only)
This PR enables the indexing optimization using sequence numbers on
replicas. With this optimization, indexing on replicas should be faster
and use less memory as it can forgo the version lookup when possible.
This change also deactivates the append-only optimization on replicas.
Relates #34099
This commit converts the ConnectionManager's openConnection and connectToNode methods to
async-style. This will allow us to not block threads anymore when opening connections. This PR also
adapts the cluster coordination subsystem to make use of the new async APIs, allowing to remove
some hacks in the test infrastructure that had to account for the previous synchronous nature of the
connection APIs.
* Use unique ports per test worker
* Add test for system property
* check presence of tests.gradle
* Revert "check presence of tests.gradle"
This reverts commit 2fee7512a28f95c94c5bf7a3312e808f918a9510.
This commit changes the way we manage refreshes in the index engines.
Instead of relying on a SearcherManager, this change uses a ReaderManager that
creates ElasticsearchDirectoryReader when needed. Searchers are now created on-demand
(when acquireSearcher is called) from the current ElasticsearchDirectoryReader.
It also slightly changes the Engine.Searcher to extend IndexSearcher in order
to simplify the usage in the consumer.
This brings TokenizerFactory into line with CharFilterFactory and TokenFilterFactory,
and removes the need to pass around tokenizer names when building custom analyzers.
As this means that TokenizerFactory is no longer a functional interface, the commit also
adds a factory method to TokenizerFactory to make construction simpler.
This is a prerequisite of #42189:
* Add directory delete method to blob container specific to each implementation:
* Some notes on the implementations:
* AWS + GCS: We can simply exploit the fact that both AWS and GCS return blobs lexicographically ordered which allows us to simply delete in the same order that we receive the blobs from the listing request. For AWS this simply required listing without the delimiter setting (so we get a deep listing) and for GCS the same behavior is achieved by not using the directory mode on the listing invocation. The nice thing about this is, that even for very large numbers of blobs the memory requirements are now capped nicely since we go page by page when deleting.
* For Azure I extended the parallelization to the listing calls as well and made it work recursively. I verified that this works with thread count `1` since we only block once in the initial thread and then fan out to a "graph" of child listeners that never block.
* HDFS and FS are trivial since we have directory delete methods available for them
* Enhances third party tests to ensure the new functionality works (I manually ran them for all cloud providers)
* Add Ability to List Child Containers to BlobContainer (#42653)
* Add Ability to List Child Containers to BlobContainer
* This is a prerequisite of #42189
This adds a `rare_terms` aggregation. It is an aggregation designed
to identify the long-tail of keywords, e.g. terms that are "rare" or
have low doc counts.
This aggregation is designed to be more memory efficient than the
alternative, which is setting a terms aggregation to size: LONG_MAX
(or worse, ordering a terms agg by count ascending, which has
unbounded error).
This aggregation works by maintaining a map of terms that have
been seen. A counter associated with each value is incremented
when we see the term again. If the counter surpasses a predefined
threshold, the term is removed from the map and inserted into a cuckoo
filter. If a future term is found in the cuckoo filter we assume it
was previously removed from the map and is "common".
The map keys are the "rare" terms after collection is done.
Action is a class that encapsulates meta information about an action
that allows it to be called remotely, specifically the action name and
response type. With recent refactoring, the action class can now be
constructed as a static constant, instead of needing to create a
subclass. This makes the old pattern of creating a singleton INSTANCE
both misnamed and lacking a common placement.
This commit renames Action to ActionType, thus allowing the old INSTANCE
naming pattern to be TYPE on the transport action itself. ActionType
also conveys that this class is also not the action itself, although
this change does not rename any concrete classes as those will be
removed organically as they are converted to TYPE constants.
relates #34389
Today the `DiskThresholdMonitor` limits the frequency with which it submits
reroute tasks, but it might still submit these tasks faster than the master can
process them if, for instance, each reroute takes over 60 seconds. This causes
a problem since the reroute task runs with priority `IMMEDIATE` and is always
scheduled when there is a node over the high watermark, so this can starve any
other pending tasks on the master.
This change avoids further updates from the monitor while its last task(s) are
still in progress, and it measures the time of each update from the completion
time of the reroute task rather than its start time, to allow a larger window
for other tasks to run.
It also now makes use of the `RoutingService` to submit the reroute task, in
order to batch this task with any other pending reroutes. It enhances the
`RoutingService` to notify its listeners on completion.
Fixes#40174
Relates #42559
Introduces a new `ConsistentSecureSettingsValidatorService` service that exposes
a single public method, namely `allSecureSettingsConsistent`. The method returns
`true` if the local node's secure settings (inside the keystore) are equal to the
master's, and `false` otherwise. Technically, the local node has to have exactly
the same secure settings - setting names should not be missing or in surplus -
for all `SecureSetting` instances that are flagged with the newly introduced
`Property.Consistent`. It is worth highlighting that the `allSecureSettingsConsistent`
is not a consensus view across the cluster, but rather the local node's perspective
in relation to the master.
This change removes the ability to wrap an IndexSearcher in plugins. The IndexSearcherWrapper is replaced by an IndexReaderWrapper and allows to wrap the DirectoryReader only. This simplifies the creation of the context IndexSearcher that is used on a per request basis. This change also moves the optimization that was implemented in the security index searcher wrapper to the ContextIndexSearcher that now checks the live docs to determine how the search should be executed. If the underlying live docs is a sparse bit set the searcher will compute the intersection
betweeen the query and the live docs instead of checking the live docs on every document that match the query.
Currently changing resources (like dictionaries, synonym files etc...) of search
time analyzers is only possible by closing an index, changing the underlying
resource (e.g. synonym files) and then re-opening the index for the change to
take effect.
This PR adds a new API endpoint that allows triggering reloading of certain
analysis resources (currently token filters) that will then pick up changes in
underlying file resources. To achieve this we introduce a new type of custom
analyzer (ReloadableCustomAnalyzer) that uses a ReuseStrategy that allows
swapping out analysis components. Custom analyzers that contain filters that are
markes as "updateable" will automatically choose this implementation. This PR
also adds this capability to `synonym` token filters for use in search time
analyzers.
Relates to #29051
Nhat Nguyen
Jason Tedor
Yannick Welsch
Armin Braun
Tim Brooks
Lee Hinman
David Turner
Christoph Büscher
Przemyslaw Gomulka
Alpar Torok
Nick Knize
Ryan Ernst
Zachary Tong
Jim Ferenczi
Alan Woodward
Zachary Tong
Albert Zaharovits