We introduced a special response_body assertion to test our docs snippets. The match assertion does the same job though and can be reused and adapted where needed. ResponseBodyAssertion contains provides much better and accurate errors though, which can be now utilized in MatchAssertion so that many more REST tests can benefit from readable error messages.
Each response body gets always stashed and can be retrieved for later evaluations already. Instead of providing the response body as strings that get parsed to json objects separately, then converted to maps as ResponseBodyAssertion did, we parse everything once, the json is part of the yaml test, which is supported. The only downside is that json comments cannot be used, rather yaml comments should be used (// C style vs # ). There were only two docs tests that were using comments in ingest-node.asciidoc where I went ahead and remove the comments which didn't seem that useful anyways.
Raise IOException on deleteBlob if the blob doesn't exist
This commit raises an IOException on BlobContainer#deleteBlob
if the blob does not exist, in conformance with the BlobContainer
interface contract. Each implementation of BlobContainer now
conforms to this contract (file system, S3, Azure, HDFS). This
commit also contains blob container tests for each of the
repository implementations.
Closes#18530
We'll migrate to NamedWriteable so we can share code with the rest
of the system. So we can work on this in multiple pull requests without
breaking Elasticsearch in between the commits this change supports
*both* old style `InternalAggregations.stream` serialization and
`NamedWriteable` style serialization. As such it creates about a
half dozen `// NORELEASE` comments that will have to be removed
once the migration is complete.
This also introduces a boolean `transportClient` flag to `SearchModule`
which is used to skip inappropriate registrations for for the
transport client while still registering the things it needs. In
this case that means that the `InternalAggregation` subclasses are
registered with the `NamedWriteableRegistry` but the `AggregationBuilder`
subclasses are not.
Finally, this moves aggregation registration from guice configuration
time to `SearchModule` construction time. This will make it simpler to
work with in the future as we further clean up Elasticsearch's
extension points.
We have long worked to capture different partitioning scenarios in our testing infra. This PR adds a new variant, inspired by the Jepsen blogs, which was forgotten far - namely a partition where one node can still see and be seen by all other nodes. It also updates the resiliency page to better reflect all the work that was done in this area.
This commits adds support for a `teardown` section that can be defined in REST tests to
clean up any items that may have been created by the test and are not cleaned up by
deletion of indices and templates.
Today we have a ton of logic inside the NettyTransport* codebase. The footprint
of the code that has a direct netty dependency is large and alternative implementations
are pretty hard today since they need to know all about our proticol etc.
This change moves most of the code into TCPTransport* baseclasses and moves all
the protocol send code together. The base classes now contain the majority of the logic
while NettyTransport* classes remain to implement the glue code, configuration and optimization.
The factory for ingest processor is generic, but that is only for the
return type of the create mehtod. However, the actual consumer of the
factories only cares about Processor, so generics are not needed.
This change removes the generic type from the factory. It also removes
AbstractProcessorFactory which only existed in order pull the optional
tag from config. This functionality is moved to the caller of the
factories in ConfigurationUtil, and the create method now takes the tag.
This allows the covariant return of the implementation to work with
tests not needing casts.
The ChannelBuffer interface today leaks into the BytesReference abstraction
which causes a hard dependency on Netty across the board. This chance moves
this dependency and all BytesReference -> ChannelBuffer conversion into
NettyUtlis and removes the abstraction leak on BytesReference.
This change also removes unused methods on the BytesReference interface
and simplifies access to internal pages.
The plan for persistent node ids ( #17811 ) is to tie the node identity to a file stored in it's data folders. As such it becomes important that nodes in our testing infra have better affinity with their data folders and that their data folders are not cleaned underneath them. The first is important because we fix the random seed used for node id generation (for reproducibility) and allowing the same node to use two different data folders causes two separate nodes to have the same id, which prevents the cluster from forming. The second is important, for example, where a full cluster restart / single node restart need to maintain node identity and wiping the data folders at the wrong moment prevents this.
Concretely this commit does the following:
1) Remove previous attempts to have data folder per role using a prefix. This wasn't effective as it was using the data paths settings which are only used for part of the runs. An attempt to completely separate the paths via the home dir failed due to assumptions made by index custom path about node data folder ordinal uniqueness (see #19076)
2) Change full cluster restarts to start up nodes in the same order their were first created in, only randomly swapping nodes with the same roles.
3) Change test cluster reset methods to first shutdown the unneeded nodes and then re-start the shared nodes that were shut down, so they'll reclaim their data folders.
4) Improve data folder wiping logic and make sure it wipes only folders of "offline" nodes.
5) Add some very basic tests
This commit modifies TimeValue parsing to keep the input time unit. This
enables round-trip parsing from instances of String to instances of
TimeValue and vice-versa. With this, this commit removes support for the
unit "w" representing weeks, and also removes support for fractional
values of units (e.g., 0.5s).
Relates #19102
#18938 has changed the timing in which we send out to nodes to fetch their shard stores. Instead of doing this after the cluster state resulting of the node's join was published, #18938 made it be sent concurrently to the publishing processes. This revealed a couple of points where the shard store fetching is dependent of the current state of affairs of the cluster state, both on the master and the data nodes. The problem discovered were already present without #18938 but required a failure/extreme situations to make them happen.This PR tries to remove as much as possible of these dependencies making shard store fetching simpler and make the way to re-introduce #18938 which was reverted.
These are the notable changes:
1) Allow TransportNodesAction (of which shard store fetching is derived) callers to supply concrete disco nodes, so it won't need the cluster state to resolve them. This was a problem because the cluster state containing the needed nodes was not yet made available through ClusterService. Note that long term we can expect the rest layer to resolve node ids to concrete nodes, making this mode the only one needed.
2) The data node relied on the cluster state to have the relevant index meta data so it can find data when custom paths are used. We now fall back to read the meta data from disk if needed.
3) The data node was relying on it's own IndexService state to indicate whether the data it has corresponds to an existing allocation. This is of course something it can not know until it got (and processed) the new cluster state from the master. This flag in the response is now removed. This is not a problem because we used that flag to protect against double assigning of a shard to the same node, but we are already protected from it by the allocation deciders.
4) I removed the redundant filterNodeIds method in TransportNodesAction - if people want to filter they can override resolveRequest.
Instead of plugins calling `registerTokenizer` to extend the analyzer
they now instead have to implement `AnalysisPlugin` and override
`getTokenizer`. This lines up extending plugins in with extending
scripts. This allows `AnalysisModule` to construct the `AnalysisRegistry`
immediately as part of its constructor which makes testing anslysis
much simpler.
This also moves the default analysis configuration into `AnalysisModule`
which is how search is setup.
Like `ScriptModule`, `AnalysisModule` no longer extends `AbstractModule`.
Instead it is only responsible for building `AnslysisRegistry`. We still
bind `AnalysisRegistry` but we only do so in `Node`. This is means it
is available at module construction time so we slowly remove the need to
bind it in guice.
This is the same as what Lucene does for its analysis factories, and we hawe
tests that make sure that the elasticsearch factories are in sync with
Lucene's. This is a first step to move forward on #9978 and #18064.
This commit moves template support out of the Search API to its own dedicated Search Template API in the lang-mustache module. It provides a new SearchTemplateAction that can be used to render templates before it gets delegated to the usual Search API. The current REST endpoint are identical, but the Render Search Template endpoint now uses the same Search Template API with a new "simulate" option. When this option is enabled, the Search Template API only renders template and returns immediatly, without executing the search.
Closes#17906
:client ---------> :client:rest
:client-sniffer -> :client:sniffer
:client-test ----> :client:test
This lines the client up with how we do things like modules and
plugins.
This changes adds a MapperPlugin interface which allows pull style
retrieval of mappers and metadata mappers added by plugins. For now, I
have kept the MapperRegistry, but this should be removed in the future
as it is just a silly container for 2 maps which could themselves be
passed around.
Makes ScriptModule just a plain class that manages building the
ScriptSettings and ScriptService from plugins. When we *need*
to bind ScriptService with guice we bind it in a lambda.
This reverts commit 969e953645a4b1a28aaa834ca0c4826ba5ea19a2.
Docs are failing because of the removed functionality. I will
fix the docs before pushing it again.
Significantly quiets the logging of the docs tests by:
1. Switching two log statements to debug level.
2. Only calling ESTestCase#afterIfFailed if the test failure wasn't
just assumptions being violated.
We pretended to be able to ackt like a different version node for so long it's
time to be honest and remove this ability. It's just confusing and where needed
and tested we should build dedicated extension points.
This commit introduce unit testing infrastructure to test replication operations using real index shards. This is infra is complementary to the full integration tests and unit testing of ReplicationOperation we already have. The new ESIndexLevelReplicationTestCase base makes it easier to test and simulate failure mode that require real shards and but do not need the full blow stack of a complete node.
The commit also add a simple "nothing is wrong" test plus a test that checks we don't drop docs during the various stages of recovery.
For now, only single doc indexing is supported but this can be easily extended in the future.
This change removes some unnecessary dependencies from ClusterService
and cleans up ClusterName creation. ClusterService is now not created
by guice anymore.
Today we have a push model for registering basically anything. All our extension points
are defined on modules which we pass in to plugins. This is harder to maintain and adds
unnecessary dependencies on the modules itself. This change moves towards a pull model
where the plugin offers a getter kind of method to get the extensions. This will also
help in the future if we need to pass dependencies to the extension points which can
easily be defined on the method as arguments if a pull model is used.
Registering a script engine or native scripts still uses Guice today
and is much more complicated than needed. This change moves to a pull
based model where script plugins have to implement a dedicated interface
`ScriptPlugin` and defines simple getter returning instances rather than
classes.
