* Introduce Safer Chaining of Listeners
* The motivation here is to make reasoning about chains of `ActionListener` a little easier, by providing a safe method for nesting `ActionListener` that guarantees that a response is never dropped. Also, it dries up the code a little by removing the need to repeat `listener::onFailure` and `listener.onResponse` over and over.
* Refactored a number of obvious/easy spots to use the new listener constructor
Zen1IT#testFreshestMasterElectedAfterFullClusterRestart fails sometimes because
we request the cluster state before state recovery has completed, and therefore
obtain the default value for the setting we're relying on.
Confusingly, we were starting out by setting this setting to its default value,
so the test looked like it was failing because of a production bug. This commit
avoids this confusion in future by setting it to a non-default value at the
start of the test.
Fixes#39586.
This commit adds the following:
- more tests to IndicesServiceCloseTests, one of them found a bug in the order
in which `IndicesQueryCache#onClose` and
`IndicesService.indicesRefCount#decRef` are called.
- made `IndicesQueryCache.stats2` a synchronized map. All writes to it are
already protected by the lock of the Lucene cache, but the final read from
an assertion in `IndicesQueryCache#close()` was not so this change should
avoid any potential visibility issues.
- human-readable `toString`s to make debugging easier.
Relates #37117
This cleans up the Engine implementation by separating the sequence number generation from the
planning step in the engine, to avoid for the planning step to have any side effects. This makes it
easier to see that every sequence number is properly accounted for.
Add debug log when index is flushed to investigate a failure
in IndicesRequestCacheIT
"DEBUG" level is used as "TRACE" produces too much output irrelevant for this
issue
Relates to #32827
Backport support for replicating closed indices (#39499)
Before this change, closed indexes were simply not replicated. It was therefore
possible to close an index and then decommission a data node without knowing
that this data node contained shards of the closed index, potentially leading to
data loss. Shards of closed indices were not completely taken into account when
balancing the shards within the cluster, or automatically replicated through shard
copies, and they were not easily movable from node A to node B using APIs like
Cluster Reroute without being fully reopened and closed again.
This commit changes the logic executed when closing an index, so that its shards
are not just removed and forgotten but are instead reinitialized and reallocated on
data nodes using an engine implementation which does not allow searching or
indexing, which has a low memory overhead (compared with searchable/indexable
opened shards) and which allows shards to be recovered from peer or promoted
as primaries when needed.
This new closing logic is built on top of the new Close Index API introduced in
6.7.0 (#37359). Some pre-closing sanity checks are executed on the shards before
closing them, and closing an index on a 8.0 cluster will reinitialize the index shards
and therefore impact the cluster health.
Some APIs have been adapted to make them work with closed indices:
- Cluster Health API
- Cluster Reroute API
- Cluster Allocation Explain API
- Recovery API
- Cat Indices
- Cat Shards
- Cat Health
- Cat Recovery
This commit contains all the following changes (most recent first):
* c6c42a1 Adapt NoOpEngineTests after #39006
* 3f9993d Wait for shards to be active after closing indices (#38854)
* 5e7a428 Adapt the Cluster Health API to closed indices (#39364)
* 3e61939 Adapt CloseFollowerIndexIT for replicated closed indices (#38767)
* 71f5c34 Recover closed indices after a full cluster restart (#39249)
* 4db7fd9 Adapt the Recovery API for closed indices (#38421)
* 4fd1bb2 Adapt more tests suites to closed indices (#39186)
* 0519016 Add replica to primary promotion test for closed indices (#39110)
* b756f6c Test the Cluster Shard Allocation Explain API with closed indices (#38631)
* c484c66 Remove index routing table of closed indices in mixed versions clusters (#38955)
* 00f1828 Mute CloseFollowerIndexIT.testCloseAndReopenFollowerIndex()
* e845b0a Do not schedule Refresh/Translog/GlobalCheckpoint tasks for closed indices (#38329)
* cf9a015 Adapt testIndexCanChangeCustomDataPath for replicated closed indices (#38327)
* b9becdd Adapt testPendingTasks() for replicated closed indices (#38326)
* 02cc730 Allow shards of closed indices to be replicated as regular shards (#38024)
* e53a9be Fix compilation error in IndexShardIT after merge with master
* cae4155 Relax NoOpEngine constraints (#37413)
* 54d110b [RCI] Adapt NoOpEngine to latest FrozenEngine changes
* c63fd69 [RCI] Add NoOpEngine for closed indices (#33903)
Relates to #33888
With #17187, we verified IndexService creation during initial state recovery on the master and if the
recovery failed the index was imported as closed, not allocating any shards. This was mainly done to
prevent endless allocation loops and full log files on data-nodes when the indexmetadata contained
broken settings / analyzers. Zen2 loads the cluster state eagerly, and this check currently runs on all
nodes (not only the elected master), which can significantly slow down startup on data nodes.
Furthermore, with replicated closed indices (#33888) on the horizon, importing the index as closed
will no longer not allocate any shards. Fortunately, the original issue for endless allocation loops is
no longer a problem due to #18467, where we limit the retries of failed allocations. The solution here
is therefore to just undo #17187, as it's no longer necessary, and covered by #18467, which will solve
the issue for Zen2 and replicated closed indices as well.
Mutations of the timeout values were using string-representations.
This resulted in very rare cases where the original timeout value was
represented as something like "0ms" and the new random time-value generated
was "0s". Although their string representations differ, their underlying
TimeValue does not. This resulted in `-Dtests.seed=7F4C034C43C22B1B` to
fail.
This adds a `details` parameter to shard locking in `NodeEnvironment`. This is
intended to be used for diagnosing issues such as
```
1> [2019-02-11T14:34:19,262][INFO ][o.e.c.m.MetaDataDeleteIndexService] [node_s0] [.tasks/oSYOG0-9SHOx_pfAoiSExQ] deleting index
1> [2019-02-11T14:34:19,279][WARN ][o.e.i.IndicesService ] [node_s0] [.tasks/oSYOG0-9SHOx_pfAoiSExQ] failed to delete index
1> org.elasticsearch.env.ShardLockObtainFailedException: [.tasks][0]: obtaining shard lock timed out after 0ms
1> at org.elasticsearch.env.NodeEnvironment$InternalShardLock.acquire(NodeEnvironment.java:736) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.shardLock(NodeEnvironment.java:655) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.lockAllForIndex(NodeEnvironment.java:601) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.deleteIndexDirectorySafe(NodeEnvironment.java:554) ~[main/:?]
```
In the hope that we will be able to determine why the shard is still locked.
Relates to #30290 as well as some other CI failures
Today we block on the ReferenceManager in the case of a scheduled refresh.
Yet if there is a refresh happening concurrently we might block and create
very smallish segments. Instead we should just move on to the next shard
and free up the refresh thread instead.
* Removed obviously unused fields+methods
* Inlined public methods that only had one caller
* Simplified `Optional` chain
* Simplified some obviously redundant conditions
* Use actual master node, not just a master elligible node when trying to cancel publication. This only works on the master and for unlucky seeds we never try the master within the 10s that the busy assert runs.
* Closes#36813
Backport of #39350
Contains the following:
* LUCENE-8635: Move terms dictionary off-heap for non-primary-key fields in `MMapDirectory`
* LUCENE-8292: `TermsEnum` is fully abstract
* LUCENE-8679: Return WITHIN in `EdgeTree#relateTriangle` only when polygon and triangle share one edge
* LUCENE-8676: Nori tokenizer deals correctly with large buffers
* LUCENE-8697: `GraphTokenStreamFiniteStrings` better handles side paths with gaps
* LUCENE-8664: Add `equals` and `hashCode` to `TotalHits`
* LUCENE-8660: `TopDocsCollector` returns accurate hit counts if the total equals the threshold
* LUCENE-8654: `Polygon2D#relateTriangle` fix for when the polygon is inside the triangle
* LUCENE-8645: `Intervals#fixField` can merge intervals from different fields
* LUCENE-8585: Create jump-tables for DocValues at index time
When trying to add a setting to the keystore with an upper case name, we
reject with an unclear error message. This commit makes that error
message much clearer.
* Don't Ping on Handshake Connection
* It does not make sense to run pings on the handshake connection
* Set the ping interval to `-1` to deactivate pings on it
Today the abstract `org.elasticsearch.discovery.PeerFinder` uses the logger of
its implementation, which in production is in `o.e.cluster.coordination`. This
turns out to be confusing and unhelpful, so with this change we move to using
the logger that belongs to `PeerFinder`.
Currently there are two security tests that specifically target the
netty security transport. This PR moves the client authentication tests
into `AbstractSimpleSecurityTransportTestCase` so that the nio transport
will also be tested.
Additionally the work to build transport configurations is moved out of
the netty transport and tested independently.
Since #39006, we should either remove `testWaitForPendingSeqNo`
or adjust it not to wait for the pending operations. This change picks
the latter.
Relates #39006
`withLocalReduction` is confusing as `local` effectively means "local
to the remote clusters" rather than "local the coordinating node" where
the method is executed. I propose we rename the method to
`crossClusterSearch` which better resembles what the static method is
used for.
We have been calling `reduce` against completion suggestions twice, once
in `SearchPhaseController#reducedQueryPhase` where all suggestions get
reduced, and once more in `SearchPhaseController#sortDocs` where we
add the top completion suggestions to the `TopDocs` so their docs can
be fetched. There is no need to do reduction twice. All suggestions can
be reduced in one call, then we can filter the result and pass only the
already reduced completion suggestions over to `sortDocs`. The small
important detail is that `shardIndex`, which is currently used only
to fetch suggestions hits, needs to be set before the first reduction,
hence outside of `sortDocs` where we have been doing it until now.
Checks that the core coordination algorithm implemented as part of Zen2 (#32006) supports
linearizable semantics. This commit adds a linearizability checker based on the Wing and Gong
graph search algorithm with support for compositional checking and activates these checks for all
CoordinatorTests.
Today we do not bubble up exceptions when processing NoOps but always
treat them as document-level failures. This incorrect treatment causes
the assert_no_failure being tripped in peer-recovery if IndexWriter was
closed exceptionally before.
Closes#38898
Today when users upgrade to 7.0, existing indices will automatically
switch to soft-deletes without an opt-out option. With this change,
we only enable soft-deletes by default for new indices.
Relates #36141
Moves the check for tiny polygons earlier in the test. It turned out
that polygons can be so tiny that we cannot even figure out their
orientation.
Relates to #37356
1. Setting length for formatWarning String to avoid AbstractStringBuilder.ensureCapacityInternal calls
2. Adding extra check for parameter array length == 0 to avoid unnecessarily creating StringBuilder in LoggerMessageFormat.format
Helps to narrow the performance gap in throughout for geonames benchmark (#37411) by 3%. For more details: https://github.com/elastic/elasticsearch/issues/37530#issuecomment-462758384
Relates to #37530
Relates to #37411
Relates to #35754
* Set mappings when creating indices in SuggestSearchIT
These tests don't test dynamic mapping, so they can use preset mappings. This
removes the possibility they may fail due to the mapping not being available
since mapping updates are asynchronous.
Resolves#39315
* Wrap creates in assertAcked
With this change, we won't wait for the local checkpoint to advance to
the max_seq_no before starting phase2 of peer-recovery. We also remove
the sequence number range check in peer-recovery. We can safely do these
thanks to Yannick's finding.
The replication group to be used is currently sampled after indexing
into the primary (see `ReplicationOperation` class). This means that
when initiating tracking of a new replica, we have to consider the
following two cases:
- There are operations for which the replication group has not been
sampled yet. As we initiated the new replica as tracking, we know that
those operations will be replicated to the new replica and follow the
typical replication group semantics (e.g. marked as stale when
unavailable).
- There are operations for which the replication group has already been
sampled. These operations will not be sent to the new replica. However,
we know that those operations are already indexed into Lucene and the
translog on the primary, as the sampling is happening after that. This
means that by taking a snapshot of Lucene or the translog, we will be
getting those ops as well. What we cannot guarantee anymore is that all
ops up to `endingSeqNo` are available in the snapshot (i.e. also see
comment in `RecoverySourceHandler` saying `We need to wait for all
operations up to the current max to complete, otherwise we can not
guarantee that all operations in the required range will be available
for replaying from the translog of the source.`). This is not needed,
though, as we can no longer guarantee that max seq no == local
checkpoint.
Relates #39000Closes#38949
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Today this test catches an exception and asserts that its proximate cause has
message `Random IOException` but occasionally this exception is wrapped two
layers deep, causing the test to fail. This commit adjusts the test to look at
the root cause of the exception instead.
1> [2019-02-25T12:31:50,837][INFO ][o.e.s.SharedClusterSnapshotRestoreIT] [testSnapshotFileFailureDuringSnapshot] --> caught a top level exception, asserting what's expected
1> org.elasticsearch.snapshots.SnapshotException: [test-repo:test-snap/e-hn_pLGRmOo97ENEXdQMQ] Snapshot could not be read
1> at org.elasticsearch.snapshots.SnapshotsService.snapshots(SnapshotsService.java:212) ~[main/:?]
1> at org.elasticsearch.action.admin.cluster.snapshots.get.TransportGetSnapshotsAction.masterOperation(TransportGetSnapshotsAction.java:135) ~[main/:?]
1> at org.elasticsearch.action.admin.cluster.snapshots.get.TransportGetSnapshotsAction.masterOperation(TransportGetSnapshotsAction.java:54) ~[main/:?]
1> at org.elasticsearch.action.support.master.TransportMasterNodeAction.masterOperation(TransportMasterNodeAction.java:127) ~[main/:?]
1> at org.elasticsearch.action.support.master.TransportMasterNodeAction$AsyncSingleAction$2.doRun(TransportMasterNodeAction.java:208) ~[main/:?]
1> at org.elasticsearch.common.util.concurrent.ThreadContext$ContextPreservingAbstractRunnable.doRun(ThreadContext.java:751) ~[main/:?]
1> at org.elasticsearch.common.util.concurrent.AbstractRunnable.run(AbstractRunnable.java:37) ~[main/:?]
1> at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) ~[?:1.8.0_202]
1> at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) ~[?:1.8.0_202]
1> at java.lang.Thread.run(Thread.java:748) [?:1.8.0_202]
1> Caused by: org.elasticsearch.snapshots.SnapshotException: [test-repo:test-snap/e-hn_pLGRmOo97ENEXdQMQ] failed to get snapshots
1> at org.elasticsearch.repositories.blobstore.BlobStoreRepository.getSnapshotInfo(BlobStoreRepository.java:564) ~[main/:?]
1> at org.elasticsearch.snapshots.SnapshotsService.snapshots(SnapshotsService.java:206) ~[main/:?]
1> ... 9 more
1> Caused by: java.io.IOException: Random IOException
1> at org.elasticsearch.snapshots.mockstore.MockRepository$MockBlobStore$MockBlobContainer.maybeIOExceptionOrBlock(MockRepository.java:275) ~[test/:?]
1> at org.elasticsearch.snapshots.mockstore.MockRepository$MockBlobStore$MockBlobContainer.readBlob(MockRepository.java:317) ~[test/:?]
1> at org.elasticsearch.repositories.blobstore.ChecksumBlobStoreFormat.readBlob(ChecksumBlobStoreFormat.java:101) ~[main/:?]
1> at org.elasticsearch.repositories.blobstore.BlobStoreFormat.read(BlobStoreFormat.java:90) ~[main/:?]
1> at org.elasticsearch.repositories.blobstore.BlobStoreRepository.getSnapshotInfo(BlobStoreRepository.java:560) ~[main/:?]
1> at org.elasticsearch.snapshots.SnapshotsService.snapshots(SnapshotsService.java:206) ~[main/:?]
1> ... 9 more
FAILURE 0.59s J0 | SharedClusterSnapshotRestoreIT.testSnapshotFileFailureDuringSnapshot <<< FAILURES!
> Throwable #1: java.lang.AssertionError:
> Expected: a string containing "Random IOException"
> but: was "[test-repo:test-snap/e-hn_pLGRmOo97ENEXdQMQ] failed to get snapshots"
> at __randomizedtesting.SeedInfo.seed([B73CA847D4B4F52D:884E042D2D899330]:0)
> at org.hamcrest.MatcherAssert.assertThat(MatcherAssert.java:20)
> at org.elasticsearch.snapshots.SharedClusterSnapshotRestoreIT.testSnapshotFileFailureDuringSnapshot(SharedClusterSnapshotRestoreIT.java:821)
> at java.lang.Thread.run(Thread.java:748)
In integration tests where `setBootstrapMasterNodeIndex()` is used in
combination with `autoMinMasterNodes = false` the cluster can start
bootstrapping once the number of nodes set with the
`setBootstrapMasterNodeIndex` have been started but it's not ensured
that all nodes have successfully joined to form the cluster.
This behaviour was introduced with 5db7ed22a0
and in order to ensure that the cluster is properly formed before proceeding
with the integration test, use `ensureStableCluster()` with the
appropriate number of expected nodes.
Fixes: #39220
In #39224 we made shard history retention lease syncing ignore the
`index.write.wait_for_active_shards` setting on the index, and added a test
that showed that it was ignored. However the test as merged actually creates a
green index, so the `wait_for_active_shards` setting has no effect. This change
adjusts the test to create a yellow index to verify that
`wait_for_active_shards` really is ignored.
This fixes an issue where a messy master election might prevent shard allocation to properly
proceed. I've encountered this in failing CI tests when we were bootstrapping multiple nodes. Tests
would sometimes time out on an `ensureGreen` after an unclean master election. The reason for
this is how the async shard information fetching works and how the clean-up logic in
GatewayAllocator is integrated with the rest of the system. When a node becomes master, it will, as
part of the first cluster state update where it becomes master, already try allocating shards (see
`JoinTaskExecutor`, in particular the call to `reroute`). This process, which runs on the
MasterService thread, will trigger async shard fetching. If the node is still processing an earlier
election failure in ClusterApplierService (e.g. due to a messy election), that will possibly trigger the
clean-up logic in GatewayAllocator after the shard fetching has been initiated by MasterService,
thereby cancelling the fetching, which means that no subsequent reroute (allocation) is triggered
after the shard fetching results return. This means that no shard allocation will happen unless the
user triggers an explicit reroute command. The bug imo is that GatewayAllocator is called from both
MasterService and ClusterApplierService threads, with no clear happens-before relation. The fix
here makes it so that the clean-up logic is also run on the MasterService thread instead of the
ClusterApplierService thread, reestablishing a clear happens-before relation. Note that testing this
is tricky. With the newly added test, I can quite often reproduce this by adding `Thread.sleep(10);`
in ClusterApplierService (to make sure it does not go too quickly) and adding `Thread.sleep(50);` in
`TransportNodesListGatewayStartedShards` to make sure that shard state fetching does not go too
quickly either.
Note that older versions of Zen discovery are affected by this as well, but did not exhibit this issue
as often because master elections are much slower there.
Adjust the retention lease sync actions so that they do not respect the
`index.write.wait_for_active_shards` setting on an index, allowing them to sync
retention leases even if insufficiently many shards are currently active to
accept writes.
Relates #39089
We tripped this assertion three times for the last two weeks. However,
it only says "this IndexWriter is closed" without the actual cause.
```
[2019-02-14T11:46:31,144][ERROR][o.e.b.ElasticsearchUncaughtExceptionHandler] [node-1] fatal error in thread [elasticsearch[node-1][generic][T#2]], exiting
java.lang.AssertionError: unexpected failure while replicating translog entry: org.apache.lucene.store.AlreadyClosedException: this IndexWriter is closed
```
This change replaces an assert with an AssertionError so that we will
have the actual cause in the next build failures.
Relates #38898
We validate HW parameters (namely, window > 2 * period) when parsing
the XContent... but that means transport clients can configure bad
params.
This change allows model to validate the window and throw an
exception if they wish.
It also makes some test changes:
- removes testBadModelParams(), which was a junk test (didn't do
anything), and bad param checking is done elsewhere in units tests
- Fixes one of the windows in testHoltWintersNotEnoughData()
- Ensures the period in testHoltWintersNotEnoughData() is >> window
- Removes `setTypes()` since that's deprecated
With this commit we remove all usages of the deprecated method
`ExceptionsHelper#detailedMessage` in tests. We do not address
production code here but rather in dedicated follow-up PRs to keep the
individual changes manageable.
Relates #19069
Currently remote compression and ping schedule settings are dynamic.
However, we do not listen for changes. This commit adds listeners for
changes to those two settings. Additionally, when those settings change
we now close existing connections and open new ones with the settings
applied.
Fixes#37201.
`ReadOnlyEngine` never recovers operations from translog and never
updates translog information in the index shard's recovery state, even
though the recovery state goes through the `TRANSLOG` stage during
the recovery. It means that recovery information for frozen shards indicates
an unkown number of recovered translog ops in the Recovery APIs
(translog_ops: `-1` and translog_ops_percent: `-1.0%`) and this is confusing.
This commit changes the `recoverFromTranslog()` method in `ReadOnlyEngine`
so that it always recover from an empty translog snapshot, allowing the recovery
state translog information to be correctly updated.
Related to #33888
`InternalEngine.resolveDocVersion()` uses `relativeTimeInMillis()` from
`ThreadPool` so it needs, the cached time to be advanced. Add a check
to ensure that and decrease the `thread_pool.estimated_time_interval`
to 1msec to prevent long running times for the test.
Fixes: #38874
Co-authored-by: Boaz Leskes <b.leskes@gmail.com>
This commit introduces the retention leases to ESIndexLevelReplicationTestCase,
then adds some tests verifying that the retention leases replication works
correctly in spite of the presence of the primary failover or out of order
delivery of retention leases sync requests.
Relates #37165
Replicates the majority of existing Derivative pipeline integration tests into
an AggregatorTestCase, with the goal of removing the integration
tests in the near future.
Fixes an error in median calculation in
MedianAbsoluteDeviationAggregatorTests for odd number of sample points,
which causes some rare test failures.
Fixes#38937
Today's calculation of the maximum number of shards per attribute is rather
convoluted. This commit clarifies that it returns
ceil(shardCount/numberOfAttributes).
Blob store compression was not enabled for some of the files in
snapshots due to constructor accessing sub-class fields. Fixed to
instead accept compress field as constructor param. Also fixed chunk
size validation to work.
Deprecated repositories.fs.compress setting as well to be able to unify
in a future commit.
Sometimes we turn objects into strings for logging or debugging using
`toString()`, but the default implementation is often unhelpful. This change
improves on this in two places I ran into recently.
This test had a bug. We attempt to allow only the primary to be
allocated, to force all replicas to recovery from the primary after we
had set the state of the retention leases on the primary. However, in
building the index settings, we were overwriting the settings that
exclude the replicas from being allocated. This means that some of the
replicas would end up assigned and rather than receive retention leases
during recovery, they would be part of the replication group receiving
retention leases as they are manipulated. Since retention lease renewals
are only synced periodically, this means that the replica could be
lagging a little behind in some cases leading to an assertion tripping
in the test. This commit addresses this by ensuring that the replicas
are indeed not allocated until after the retention leases are done being
manipulated on the replica. We did this by not overwriting the exclude
settings.
Closes#39105
The parseMillis method was able to work on formats without timezones by
falling back to UTC. The Date Formatter interface did not support this, as
the calling code was using the `Instant.from` java time API.
This switches over to an internal method which adds UTC as a timezone.
Closes#39067
When retention leases fail to sync after an expiration check, we emit a
log message about this. This commit adds the retention leases that
failed to sync.
When the background retention lease sync fires, we check an see if any
retention leases are expired. If any did expire, we execute a full
retention lease sync (write action). Since this is happening on a
background thread, we do not block that thread waiting for success (it
will simply try again when the timer elapses). However, we were
swallowing exceptions that indicate failure. This commit addresses that
by logging the failures. Additionally, we add some trace logging to the
execution of syncing retention leases.
Fixed two potential causes for leaked threads during tests:
1. When adding a channel to serverChannels, we add it under a monitor
that we do not use when reading from it. This is potentially unsafe if
there is no other happens-before relationship ensuring the safety of
this.
2. Long-shot but if the thread pool was shutdown before entering this
code, we would silently forget about closing server channels so added
assert.
Strengthened the locking to ensure that once we stop the transport, no
new server channels can be made.
Relates to CI failure issue: #37543
Many of our index components use ref-counting so that in the event that a shard
is closed while there are still ongoing requests, then the index reader and the
store only effectively get closed when ongoing requests have finished. However
we don't apply the same principle to the request and query caches, which might
get closed while there are still in-flight requests.
This commit adds ref-counting to `IndicesService` so that the caches and other
components it maintains only get closed when all shards are effectively closed.
Closes#37117
* During fetching remote mapping if remote client is missing then
`NoSuchRemoteClusterException` was not handled.
* When adding remote connection, check that it is really connected
before continue-ing to run the tests.
Relates to #38695
This commit is the first step in integrating shard history retention
leases with CCR. In this commit we integrate shard history retention
leases with recovery from remote. Before we start transferring files, we
take out a retention lease on the primary. Then during the file copy
phase, we repeatedly renew the retention lease. Finally, when recovery
from remote is complete, we disable the background renewing of the
retention lease.
This commit adds a `ListenerTimeouts` class that will wrap a
`ActionListener` in a listener with a timeout scheduled on the generic
thread pool. If the timeout expires before the listener is completed,
`onFailure` will be called with an `ElasticsearchTimeoutException`.
Timeouts for the get ccr file chunk action are implemented using this
functionality. Additionally, this commit attempts to fix#38027 by also
blocking proxied get ccr file chunk actions. This test being un-muted is
useful to verify the timeout functionality.
`SearchShardIterator` inherits its `compareTo` implementation from `PlainShardIterator`. That is good in most of the cases, as such comparisons are based on the shard id which is unique, even when searching against indices with same names across multiple clusters (thanks to the index uuid being different). In case though the same cluster is registered multiple times with different aliases, the shard id is exactly the same, hence remote results will be returned before local ones with same shard id objects. That is because remote iterators are added before local ones, and we use a stable sorting method in `GroupShardIterators` constructor.
This PR enhances `compareTo` for `SearchShardIterator` to tie break on cluster alias and introduces consistent `equals` and `hashcode` methods. This allows to remove a TODO in `SearchResponseMerger` which otherwise has to handle this special case specifically. Also, while at it I added missing tests around equals/hashcode and compareTo and expanded existing ones.
Today when processing an operation on a replica engine (or the
following engine), we first add it to Lucene, then add it to translog,
then finally marks its seq_no as completed. If a flush occurs after step1,
but before step-3, the max_seq_no in the commit's user_data will be
smaller than the seq_no of some documents in the Lucene commit.
We verify seq_no_stats is aligned between copies at the end of some
disruption tests. Sometimes, the assertion `assertSeqNos` is tripped due
to a lagged global checkpoint on replicas. The global checkpoint on
replicas is lagged because we sync the global checkpoint 30 seconds (by
default) after the last replication operation. This change reduces the
global checkpoint sync-internal to 1s in the disruption tests.
Closes#38318Closes#36789
The predicate shouldPeriodicallyFlush is determined by the uncommitted
translog size and the local checkpoint. The uncommitted translog size
depends on the local checkpoint. The condition shouldPeriodicallyFlush
can be true twice in in the test in the following scenario:
1. Index doc-0 and advances the local checkpoint to 0, the condition
shouldPeriodicallyFlush remains false.
2. Index doc-1 and add it to translog, but the local checkpoint is not
advanced yet (still 0). The condition shouldPeriodicallyFlush becomes
true because the uncommitted translog size is 216bytes (2ops + gen-1 +
gen-2) > 180bytes and the translog generation of the new index commit
would advance from 1 to 2.
> [2019-02-13T23:33:58,257][TRACE][o.e.i.e.Engine ] [node_s_0]
> [test][0] committing writer with commit data [{local_checkpoint=0,
> max_unsafe_auto_id_timestamp=-1, translog_uuid=fFp1Yqd4QiqKDD4ZrC8F-g,
> min_retained_seq_no=0, history_uuid=cn31yrwVQk-Vs7qcg4bi_Q,
> retention_leases=primary_term:1;version:0;, translog_generation=2,
> max_seq_no=1}]
1. The shouldPeriodicallyFlush becomes true again after the local
checkpoint is advanced to 1 because the uncommitted translog size is
216bytes (2ops + gen-2 + gen-3) > 180bytes and the translog generation
of the new index commit would advance from 2 to 4.
> [2019-02-13T23:33:58,264][TRACE][o.e.i.e.Engine ] [node_s_0]
> [test][0] committing writer with commit data [{local_checkpoint=1,
> max_unsafe_auto_id_timestamp=-1, translog_uuid=fFp1Yqd4QiqKDD4ZrC8F-g,
> min_retained_seq_no=0, history_uuid=cn31yrwVQk-Vs7qcg4bi_Q,
> retention_leases=primary_term:1;version:0;, translog_generation=4,
> max_seq_no=1}]
We need to relax the assertion in this test to cover this situation.
Closes#31629
* Fix Issue with Concurrent Snapshot Init + Delete by ensuring that we're not finalizing a snapshot in the repository while it is initializing on another thread
* Closes#38489
DfsPhase captures terms used for scoring a query in order to build global term statistics across
multiple shards for more accurate scoring. It currently does this by building the query's `Weight`
and calling `extractTerms` on it to collect terms, and then calling `IndexSearcher.termStatistics()`
for each collected term. This duplicates work, however, as the various `Weight` implementations
will already have collected these statistics at construction time.
This commit replaces this round-about way of collecting stats, instead using a delegating
IndexSearcher that collects the term contexts and statistics when `IndexSearcher.termStatistics()`
is called from the Weight.
It also fixes a bug when using rescorers, where a `QueryRescorer` would calculate distributed term
statistics, but ignore field statistics. `Rescorer.extractTerms` has been removed, and replaced with
a new method on `RescoreContext` that returns any queries used by the rescore implementation.
The delegating IndexSearcher then collects term contexts and statistics in the same way described
above for each Query.
With this commit we add the `.cfs` file extension to the list of file
types that are memory-mapped by hybridfs. `.cfs` files combine all files
of a Lucene segment into a single file in order to save file handles. As
this strategy is only used for "small" segments (less than 10% of the
shard size), it is benefical to memory-map them instead of accessing
them via NIO.
Relates #36668
Today if soft deletes are enabled then we read the operations needed for peer
recovery from Lucene. However we do not currently make any attempt to retain
history in Lucene specifically for peer recoveries so we may discard it and
fall back to a more expensive file-based recovery. Yet we still retain
sufficient history in the translog to perform an operations-based peer
recovery.
In the long run we would like to fix this by retaining more history in Lucene,
possibly using shard history retention leases (#37165). For now, however, this
commit reverts to performing peer recoveries using the history retained in the
translog regardless of whether soft deletes are enabled or not.
Previously, if a version conflict occurred and a previous primary
response was present, the original primary response would be used both
for sending to replica and back to client. This was made in the past as an
attempt to fix issues with conflicts after relocations where a bulk request
would experience a closed shard half way through and thus have to retry
on the new primary. It could then fail on its own update.
With sequence numbers, this leads to an issue, since if a primary is
demoted (network partitions), it will send along the original response
in the request. In case of a conflict on the new primary, the old
response is sent to the replica. That data could be stale, leading to
inconsistency between primary and replica.
Relocations now do an explicit hand-off from old to new primary and
ensures that no operations are active while doing this. Above is thus no
longer necessary. This change removes the special handling of conflicts
and ignores primary responses when executing shard bulk requests on the
primary.
Prior to this commit, when an indexing operation resulted in an
`Engine.Result.Type.MAPPING_UPDATE_REQUIRED`, TransportShardBulkAction
immediately retries the indexing operation to see if it succeeds. In the event
that it succeeds the context does not wait until the mapping update has
propagated through the cluster state before finishing the indexing.
In some of our tests we rely on mappings being available as soon as they've been
introduced in a document that indexed correctly. By removing the immediate retry
we always wait for this to be the case.
Resolves#38428
Supercedes #38579
Relates to #38711
One of the test methods wasn't run because it was private. Making this method
public and fixing some issues around mocking the threadpool that otherwise would
lead to an NPE.
This changes the output of the `_cat/indices` API with `Security` enabled.
It is possible to only display the index name (and possibly the index
health, depending on the request options) but not its stats (doc count, merges,
size, etc). This is the case for closed indices which have index metadata in the
cluster state but no associated shards, hence no shard stats.
However, when `Security` is enabled, and the request contains wildcards,
**open** indices without stats are a common occurrence. This is because the
index names in the response table are picked up directly from the cluster state
which is not filtered by `Security`'s _indexNameExpressionResolver_, unlike the
stats data which is populated by the indices stats API which does go through the
index name resolver.
This is a bug, because it is circumventing `Security`'s function to hide
unauthorized indices.
This has been fixed by displaying the index names as they are resolved by the indices
stats API. The outputs of these two APIs is now very similar: same index names,
similar data but different format.
Closes#37190
#37767 changed the expected exception for "no such cluster" error from
`IllegalStateException` to a dedicated `NoSuchRemoteClusterException`.
An assertion in `testCollectNodes` needs to be updated accordingly.
When a primary shard is recovered from its store, we trim the last
commit (when it's unsafe). If that primary crashes before the recovery
completes, we will lose the committed retention leases because they are
baked in the last commit. With this change, we copy the retention leases
from the last commit to the safe commit when trimming unsafe commits.
Relates #37165
In this case, we were incrementing the policy too much. This means on
every iteration we actually keep increasing the minimum retained
sequence number, even with leases in place. It was a bug from when the
soft deletes policy had retention leases incorporated into it. This
commit fixes this bug by ensuring we only increment in the proper
places, and adds careful tests for the various situations.
Forward port of https://github.com/elastic/elasticsearch/pull/38757
This change reverts the initial 7.0 commits and replaces them
with the 6.7 variant that still allows for the ecs flag.
This commit differs from the 6.7 variants in that ecs flag will
now default to true.
6.7: `ecs` : default `false`
7.x: `ecs` : default `true`
8.0: no option, but behaves as `true`
* Revert "Ingest node - user agent, move device to an object (#38115)"
This reverts commit 5b008a34aa.
* Revert "Add ECS schema for user-agent ingest processor (#37727) (#37984)"
This reverts commit cac6b8e06f.
* cherry-pick 5dfe1935345da3799931fd4a3ebe0b6aa9c17f57
Add ECS schema for user-agent ingest processor (#37727)
* cherry-pick ec8ddc890a34853ee8db6af66f608b0ad0cd1099
Ingest node - user agent, move device to an object (#38115) (#38121)
* cherry-pick f63cbdb9b426ba24ee4d987ca767ca05a22f2fbb (with manual merge fixes)
Dep. check for ECS changes to User Agent processor (#38362)
* make true the default for the ecs option, and update 7.0 references and tests
The hardcoded '\n' in string will not work in Windows where there is a
different line separator. A System.lineSeparator should be used to make
it work on all platforms
closes#38705
backport #38771
- Disables the request cache on the test, to prevent cached
values from potentially interfering with test results
- Changes the test to execute a single query, in hopes of making
failures more reproducible
Backport of #38583
There were two documents (seq=2 and seq=103) missing on the follower in
one of the failures of `testFailOverOnFollower`. I spent several hours
on that failure but could not figure out the reason. I adjust log and
unmute this test so we can collect more information.
Relates #38633
We need to use the current primary term instead of 1L for the initial
retention leases; otherwise, the primary term of the committed
retention leases won't match the current primary term if the
retention leases never gets updated.
This commit introduces actions for some common retention lease
operations that clients need to be able to perform remotely. These
actions include add/renew/remove.
fix tests to use clock in milliseconds precision in watcher code
make sure the date comparison in string format is using same formatters
some of the code was modified in #38514 possibly because of merge conflicts
closes#38581
Backport #38738
A recent test failure triggered an edge case scenario where failures may be coming back with the same shard id, yet from different clusters.
This commit adapts the failures comparator to take the cluster alias into account when merging failures as part of CCS requests execution.
Also the corresponding test has been split in two: with and without
search shard target set to the failure.
Closes#38672
When a retention lease already exists on an add retention lease
invocation, or a retention lease is not found on a renew retention lease
invocation today we throw an illegal argument exception. This puts a
burden on the caller to catch that specific exception and parse the
message. This commit relieves the burden from the caller by adding
dedicated exception types for these situations.
This commit introduces the ability to remove retention leases. Explicit
removal will be needed to manage retention leases used to increase the
likelihood of operation-based recoveries syncing, and for consumers such
as ILM.
geo_shape indexes created before 6.6 use geohash string encoding as default tree parameter and quadtree encoding for 6.6 and later. This commit fixes bwc to use geohash encoding in LegacyGeoshapeFieldMapper for indexes created before 6.6.
The assertion that the stats2 map is empty in
IndicesQueryCache.close has been observed to
fail very occasionally in internal cluster tests.
The likely cause is a cross-thread visibility
problem for a count variable. This change
makes that count volatile.
Relates #37117
Backport of #38714
The Close Index API has been refactored in 6.7.0 and it now performs
pre-closing sanity checks on shards before an index is closed: the maximum
sequence number must be equals to the global checkpoint. While this is a
strong requirement for regular shards, we identified the need to relax this
check in the case of CCR following shards.
The following shards are not in charge of managing the max sequence
number or global checkpoint, which are pulled from a leader shard. They
also fetch and process batches of operations from the leader in an unordered
way, potentially leaving gaps in the history of ops. If the following shard lags
a lot it's possible that the global checkpoint and max seq number never get
in sync, preventing the following shard to be closed and a new PUT Follow
action to be issued on this shard (which is our recommended way to
resume/restart a CCR following).
This commit allows each Engine implementation to define the specific
verification it must perform before closing the index. In order to allow
following/frozen/closed shards to be closed whatever the max seq number
or global checkpoint are, the FollowingEngine and ReadOnlyEngine do
not perform any check before the index is closed.
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Added a constructor accepting `StreamInput` as argument, which allowed to
make most of the instance members final as well as remove the default
constructor.
Removed a test only constructor in favour of invoking the existing
constructor that takes a `SearchRequest` as first argument.
Also removed profile members and related methods as they were all unused.
The existing formatter being used was not on par with the joda formatter
as it was missing the ability to parse a comma as a separator between
seconds and milliseconds.
While a real iso8601 would be much more complex, this might be
sufficient for some more use-cases.
The ingest date formatter now also uses the iso8601 formatter by
default.
Closes#38345
The benchmarks showed a sharp decrease in aggregation performance for
the UTC case.
This commit uses the same calculation as joda time, which requires no
conversion into any java time object, also, the check for an fixedoffset
has been put into the ctor to reduce the need for runtime calculations.
The same goes for the amount of the used unit in milliseconds.
Closes#37826
Whenever phase failure is raised in AbstractSearchAsyncAction, we go and
release search contexts of shards that successfully returned their
results, prior to notifying the listener of the failure. In case we are
executing a CCS request, it's important to look-up the connection to
send the release context request to.
This commit makes sure that the lookup takes the cluster alias into
account. We used to use `null` at all times instead which is not correct
and was not caught as any exception is caught without re-throwing it.
The test was relying on toString in ZonedDateTime which is different to
what is formatted by strict_date_time when milliseconds are 0
The method is just delegating to dateFormatter, so that scenario should
be covered there.
closes#38359
Backport #38610
Adds the ability to fetch chunks from different files in parallel, configurable using the new `ccr.indices.recovery.max_concurrent_file_chunks` setting, which defaults to 5 in this PR.
The implementation uses the parallel file writer functionality that is also used by peer recoveries.
This commit adds the 7.1 version constant to the 7.x branch.
Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
This commit changes the `TransportVerifyShardBeforeCloseAction` so that it
always forces the flush of the shard. It seems that #37961 is not sufficient to
ensure that the translog and the Lucene commit share the exact same max
seq no and global checkpoint information in case of one or more noop
operations have been made.
The `BulkWithUpdatesIT.testThatMissingIndexDoesNotAbortFullBulkRequest`
and `FrozenIndexTests.testFreezeEmptyIndexWithTranslogOps` test this trivial
situation and they both fail 1 on 10 executions.
Relates to #33888
In #38333 and #38350 we moved away from the `discovery.zen` settings namespace
since these settings have an effect even though Zen Discovery itself is being
phased out. This change aligns the documentation and the names of related
classes and methods with the newly-introduced naming conventions.
This commit integrates retention leases with recovery. With this change,
we copy the current retention leases on primary to the replica during
phase two of recovery. At this point, the replica will have been added
to the replication group and so is already receiving retention lease
sync requests from the primary. This means that if any retention lease
syncs are triggered on the primary after we sample the retention leases
here during phase two, that sync request will also arrive on the replica
ensuring that the replica is from this point on up to date with the
retention leases on the primary. We have to copy these during phase two
since we will be applying indexing operations, potentially triggering
merges, and therefore must ensure the correct retention leases are in
place beforehand.
Instead of logging warnings we now rethrow exceptions thrown inside
scheduled/submitted tasks. This will still log them as warnings in
production but has the added benefit that if they are thrown during
unit/integration test runs, the test will be flagged as an error.
This is a continuation of #38014
Fixed NPE that caused CCR tests (IndexFollowingIT and likely others)
to fail.
schedule could bubble rejected exception to uncaught exception
handler when not using SAME executor if thread pool is terminated.
Now ignore rejected exception silently if executor is shutdown.
Elasticsearch has long [supported](https://www.elastic.co/guide/en/elasticsearch/reference/current/docs-index_.html#index-versioning) compare and set (a.k.a optimistic concurrency control) operations using internal document versioning. Sadly that approach is flawed and can sometime do the wrong thing. Here's the relevant excerpt from the resiliency status page:
> When a primary has been partitioned away from the cluster there is a short period of time until it detects this. During that time it will continue indexing writes locally, thereby updating document versions. When it tries to replicate the operation, however, it will discover that it is partitioned away. It won’t acknowledge the write and will wait until the partition is resolved to negotiate with the master on how to proceed. The master will decide to either fail any replicas which failed to index the operations on the primary or tell the primary that it has to step down because a new primary has been chosen in the meantime. Since the old primary has already written documents, clients may already have read from the old primary before it shuts itself down. The version numbers of these reads may not be unique if the new primary has already accepted writes for the same document
We recently [introduced](https://www.elastic.co/guide/en/elasticsearch/reference/6.x/optimistic-concurrency-control.html) a new sequence number based approach that doesn't suffer from this dirty reads problem.
This commit removes support for internal versioning as a concurrency control mechanism in favor of the sequence number approach.
Relates to #1078
This commit lifts the control of when retention leases are expired to
index shard. In this case, we move expiration to an explicit action
rather than a side-effect of calling
ReplicationTracker#getRetentionLeases. This explicit action is invoked
on a timer. If any retention leases expire, then we hard sync the
retention leases to the replicas. Otherwise, we proceed with a
background sync.
Currently the snapshot/restore process manually sets the global
checkpoint to the max sequence number from the restored segements. This
does not work for Ccr as this will lead to documents that would be
recovered in the normal followering operation from being recovered.
This commit fixes this issue by setting the initial global checkpoint to
the existing local checkpoint.
Previously, date formats of `YYYY.MM.dd` would hit an issue
where the year would jump towards the end of the calendar year.
This was an issue that had since been resolved in tests by using
`yyyy` to be the more accurate representation of the year.
Closes#37037.
`CreateIndexRequest#source(Map<String, Object>, ... )`, which is used when
deserializing index creation requests, accidentally accepts mappings that are
nested twice under the type key (as described in the bug report #38266).
This in turn causes us to be too lenient in parsing typeless mappings. In
particular, we accept the following index creation request, even though it
should not contain the type key `_doc`:
```
PUT index?include_type_name=false
{
"mappings": {
"_doc": {
"properties": { ... }
}
}
}
```
There is a similar issue for both 'put templates' and 'put mappings' requests
as well.
This PR makes the minimal changes to detect and reject these typed mappings in
requests. It does not address #38266 generally, or attempt a larger refactor
around types in these server-side requests, as I think this should be done at a
later time.
With this change we no longer support pluggable discovery implementations. No
known implementations of `DiscoveryPlugin` actually override this method, so in
practice this should have no effect on the wider world. However, we were using
this rather extensively in tests to provide the `test-zen` discovery type. We
no longer need a separate discovery type for tests as we no longer need to
customise its behaviour.
Relates #38410
Today we throw a fatal `RuntimeException` if an exception occurs in
`getMasterName()`, and this includes the case where there is currently no
master. However, sometimes we call this method inside an `assertBusy()` in
order to allow for a cluster that is in the process of stabilising and electing
a master. The trouble is that `assertBusy()` only retries on an
`AssertionError` and not on a general `RuntimeException`, so the lack of a
master is immediately fatal.
This commit fixes the issue by asserting there is a master, triggering a retry
if there is not.
Fixes#38331
* The problem in #38226 is that in some corner cases multiple calls to `endSnapshot` were made concurrently, leading to non-deterministic behavior (`beginSnapshot` was triggering a repository finalization while one that was triggered by a `deleteSnapshot` was already in progress)
* Fixed by:
* Making all `endSnapshot` calls originate from the cluster state being in a "completed" state (apart from on short-circuit on initializing an empty snapshot). This forced putting the failure string into `SnapshotsInProgress.Entry`.
* Adding deduplication logic to `endSnapshot`
* Also:
* Streamlined the init behavior to work the same way (keep state on the `SnapshotsService` to decide which snapshot entries are stale)
* closes#38226
We already support unknown objects in the list of pipelines, this changes the
`PipelineConfiguration` to support fields other than just `id` and `config`.
Relates to #36938
Renames the following settings to remove the mention of `zen` in their names:
- `discovery.zen.hosts_provider` -> `discovery.seed_providers`
- `discovery.zen.ping.unicast.concurrent_connects` -> `discovery.seed_resolver.max_concurrent_resolvers`
- `discovery.zen.ping.unicast.hosts.resolve_timeout` -> `discovery.seed_resolver.timeout`
- `discovery.zen.ping.unicast.hosts` -> `discovery.seed_addresses`
X-Pack security supports built-in authentication service
`token-service` that allows access tokens to be used to
access Elasticsearch without using Basic authentication.
The tokens are generated by `token-service` based on
OAuth2 spec. The access token is a short-lived token
(defaults to 20m) and refresh token with a lifetime of 24 hours,
making them unsuitable for long-lived or recurring tasks where
the system might go offline thereby failing refresh of tokens.
This commit introduces a built-in authentication service
`api-key-service` that adds support for long-lived tokens aka API
keys to access Elasticsearch. The `api-key-service` is consulted
after `token-service` in the authentication chain. By default,
if TLS is enabled then `api-key-service` is also enabled.
The service can be disabled using the configuration setting.
The API keys:-
- by default do not have an expiration but expiration can be
configured where the API keys need to be expired after a
certain amount of time.
- when generated will keep authentication information of the user that
generated them.
- can be defined with a role describing the privileges for accessing
Elasticsearch and will be limited by the role of the user that
generated them
- can be invalidated via invalidation API
- information can be retrieved via a get API
- that have been expired or invalidated will be retained for 1 week
before being deleted. The expired API keys remover task handles this.
Following are the API key management APIs:-
1. Create API Key - `PUT/POST /_security/api_key`
2. Get API key(s) - `GET /_security/api_key`
3. Invalidate API Key(s) `DELETE /_security/api_key`
The API keys can be used to access Elasticsearch using `Authorization`
header, where the auth scheme is `ApiKey` and the credentials, is the
base64 encoding of API key Id and API key separated by a colon.
Example:-
```
curl -H "Authorization: ApiKey YXBpLWtleS1pZDphcGkta2V5" http://localhost:9200/_cluster/health
```
Closes#34383
The HLRC client currently uses `org.elasticsearch.action.admin.indices.get.GetIndexRequest`
and `org.elasticsearch.action.admin.indices.get.GetIndexResponse` in its get index calls. Both request and
response are designed for the typed APIs, including some return types e.g. for `getMappings()` which in
the maps it returns still use a level including the type name.
In order to change this without breaking existing users of the HLRC API, this PR introduces two new request
and response objects in the `org.elasticsearch.client.indices` client package. These are used by the
IndicesClient#get and IndicesClient#exists calls now by default and support the type-less API. The old request
and response objects are still kept for use in similarly named, but deprecated methods.
The newly introduced client side classes are simplified versions of the server side request/response classes since
they don't need to support wire serialization, and only the response needs fromXContent parsing (but no
xContent-serialization, since this is the responsibility of the server-side class).
Also changing the return type of `GetIndexResponse#getMapping` to
`Map<String, MappingMetaData> getMappings()`, while it previously was returning another map
keyed by the type-name. Similar getters return simple Maps instead of the ImmutableOpenMaps that the
server side response objects return.
As mapping types are being removed throughout Elasticsearch, the use of
`_type` in pipeline simulation requests is deprecated. Additionally, the
default `_type` used if one is not supplied has been changed to `_doc` for
consistency with the rest of Elasticsearch.
The message `... took [31s] above the warn threshold of 30s` suggests
incorrectly that the task took 61 seconds. This commit adds the clarifying
words `which is`.
This commit introduces a background sync for retention leases. The idea
here is that we do a heavyweight sync when adding a new retention lease,
and then periodically we want to background sync any retention lease
renewals to the replicas. As long as the background sync interval is
significantly lower than the extended lifetime of a retention lease, it
is okay if from time to time a replica misses a sync (it will still have
an older version of the lease that is retaining more data as we assume
that renewals do not decrease the retaining sequence number). There are
two follow-ups that will come after this commit. The first is to address
the fact that we have not adapted the should periodically flush logic to
possibly flush the retention leases. We want to do something like flush
if we have not flushed in the last five minutes and there are renewed
retention leases since the last time that we flushed. An additional
follow-up will remove the syncing of retention leases when a retention
lease expires. Today this sync could be invoked in the background by a
merge operation. Rather, we will move the syncing of retention lease
expiration to be done under the background sync. The background sync
will use the heavyweight sync (write action) if a lease has expired, and
will use the lightweight background sync (replication action) otherwise.
Reduces the leader and follower check timeout to 3 * 10 = 30s instead of 3 * 30 = 90s, with 30s still
being a very long time for a node to be completely unresponsive.
This adds a dedicated field mapper that supports nanosecond resolution -
at the price of a reduced date range.
When using the date field mapper, the time is stored as milliseconds since the epoch
in a long in lucene. This field mapper stores the time in nanoseconds
since the epoch - which means its range is much smaller, ranging roughly from
1970 to 2262.
Note that aggregations will still be in milliseconds.
However docvalue fields will have full nanosecond resolution
Relates #27330
Today the following settings in the `discovery.zen` namespace are still used:
- `discovery.zen.no_master_block`
- `discovery.zen.hosts_provider`
- `discovery.zen.ping.unicast.concurrent_connects`
- `discovery.zen.ping.unicast.hosts.resolve_timeout`
- `discovery.zen.ping.unicast.hosts`
This commit deprecates all other settings in this namespace so that they can be
removed in the next major version.
* This was a merge mistake on my end I think, obviously we only need to loop over the shards once not twice here to find those that we missed in INIT state
* Fix Incorrect Transport Response Handler Type
* The response type here is not empty and was always wrong but this only became visible now that 0a604e3b24 was introduced
* As a result of 0a604e3b24 we started actually handling the response
of this request and logging/handling exceptions before that we simply dropped the classcast exception here quietly using the empty response handler
* fix busy assert not handling `Exception`
* Closes#38226
* Closes#38256
Today we have DiscoveryDisruptionIT tests for checking that discovery can still
work once the cluster has formed, even if the cluster is misconfigured and only
has a single master-eligible node in its unicast hosts list. In fact with Zen2
we can go one better: we do not need any nodes in the unicast hosts list,
because nodes also use the contents of the last-committed cluster state for
discovery. Additionally, the DiscoveryDisruptionIT tests were failing due to
the overenthusiastic fault-detection timeouts.
This commit replaces these tests with deterministic `CoordinatorTests` that
verify the same behaviour. It also removes some duplication by extracting a
test method called `testFollowerCheckerAfterMasterReelection()`
Closes#37687
We should increase primary term before renewing leases; otherwise, the
term of the latest RetentionLeases will be lower than the current term.
Relates #37951
If the innerLength is 0, the version won't be increased; then there will
be two RetentionLeases with the same term and version, but their leases
are different.
Relates #37951Closes#38245
Because concurrent sync requests from a primary to its replicas could be
in flight, it can be the case that an older retention leases collection
arrives and is processed on the replica after a newer retention leases
collection has arrived and been processed. Without a defense, in this
case the replica would overwrite the newer retention leases with the
older retention leases. This commit addresses this issue by introducing
a versioning scheme to retention leases. This versioning scheme is used
to resolve out-of-order processing on the replica. We persist this
version into Lucene and restore it on recovery. The encoding of
retention leases is starting to get a little ugly. We can consider
addressing this in a follow-up.
* Instead of replacing the `shardSnapshots` field, we mutate it, explicitly removing entries from it in only a single spot
* Decreased the amount of indirection by moving all logic for starting a snapshot's newly discovered shard tasks into `startNewShards` (saves us two maps (keyed by snapshot) and iterations over them)
In Zen 1 there are commit timeout and publish timeout and these
settings could be changed on-the-fly.
In Zen 2, there is only commit timeout and this setting is static.
RareClusterStateIT is actively using these settings and the fact, they
are dynamic.
This commit adds cancelCommitedPublication method to Coordinator to
be used by tests. This method will cancel current committed publication
if there is any.
When there is BlockClusterStateProcessing on the non-master node, the
publication will be accepted and committed, but not yet applied. So we
can use the method above to cancel it.
Also, this commit replaces callback + AtomicReference with ActionFuture,
which makes test code easier to read.
Using index.routing.allocation.require._host does not correctly work because the boolean logic in
filter matching is broken (DiscoveryNodeFilters.match(...) will return false) when
opType ==OpType.AND
When restoring shards of existing indices, the RestoreService also
restores the values of primary terms stored in the snapshot index
metadata. The primary terms are not updated and could potentially
conflict with current index primary terms if the restored primary terms
are lower than the existing ones.
This situation is likely to happen with replicated closed indices
(because primary terms are increased when the index is transitioning
from open to closed state, and the snapshotted primary terms are the
one at the time the index was opened) (see #38024) and maybe also
with CCR.
This commit changes the RestoreService so that it updates the primary
terms using the maximum value between the snapshotted values and
the existing values.
Related to #33888
If custom date formats are used, there may be combinations that the new
performat DateFormatters.from() method has not covered yet. This adds a
few such corner cases and ensures the tests are correctly commented
out.
In #38158 we ensured that global ordinals are not loaded when another execution hint is explicitly set on the source. This change is a follow up that addresses a comment
dd6043c1c0 (r252984782) added after the merge.
This commit adds the second part of `elasticsearch-node` tool -
`detach-cluster` command in addition to `unsafe-bootstrap` command.
Also, this commit changes the semantics of `unsafe-bootstrap`, now
`unsafe-bootstrap` changes clusterUUID.
So the algorithm of running `elasticsearch-node` tool is the following:
1) Stop all nodes in the cluster.
2) Pick master-eligible node with the highest (term, version) pair and
run the `unsafe-bootstrap` command on it. If there are no survived
master-eligible nodes - skip this step.
3) Run `detach-cluster` command on the remaining survived nodes.
Detach cluster makes the following changes to the node metadata:
1) Sets clusterUUID committed to false.
2) Sets currentTerm and term to 0.
3) Removes voting tombstones and sets voting configurations to special
constant MUST_JOIN_ELECTED_MASTER, that prevents initial cluster
bootstrap.
`ElasticsearchNodeCommand` base abstract class is introduced, because
`UnsafeBootstrapMasterCommand` and `DetachClusterCommand` have a lot in
common.
Also, this commit adds "ordinal" parameter to both commands, because it's
impossible to write IT otherwise.
For MUST_JOIN_ELECTED_MASTER case special handling is introduced in
`ClusterFormationFailureHelper`.
Tests for both commands reside in `ElasticsearchNodeCommandIT` (renamed
from `UnsafeBootstrapMasterIT`).
The current CloseWhileRelocatingShardsIT test adds some "send behavior"
rule to a target node's mocked transport service in order to detect when shard
relocating are started. These rules are never cleared and prevent the test to
complete normally after the rebalance is re-enabled again.
This commit changes the test so that rules are cleared and most verifications
are done before the rebalance is reenabled again.
Closes#38090
Folks at the Lucene project do not seem to be interested in classifying corruptions and
distinguishing them from file-system exceptions (see https://issues.apache.org/jira/browse/LUCENE-8525),
so we'll just cop out as well.
Closes#34322
With #37000 we made sure that fnial reduction is automatically disabled
whenever a localClusterAlias is provided with a SearchRequest.
While working on #37838, we found a scenario where we do need to set a
localClusterAlias yet we would like to perform a final reduction in the
remote cluster: when searching on a single remote cluster.
Relates to #32125
This commit adds support for a separate finalReduce flag to
SearchRequest and makes use of it in TransportSearchAction in case we
are searching against a single remote cluster.
This also makes sure that num_reduce_phases is correct when searching
against a single remote cluster: it makes little sense to return
`num_reduce_phases` set to `2`, which looks especially weird in case
the search was performed against a single remote shard. We should
perform one reduction phase only in this case and `num_reduce_phases`
should reflect that.
* line length
This change forbids negative field boost in the `query_string`, `simple_query_string`
and `multi_match` queries.
Negative boosts are not allowed in Lucene 8 (scores must be positive).
The backport of this change to 6x will turn the error into a deprecation warning
in order to raise the awareness of this breaking change in 7.0.
Closes#33309
Currently, there are a few tests that use autoMinMasterNodes=false and
hence override addExtraClusterBootstrapSettings, mostly this is 10-30
lines of codes that are copy-pasted from class to class.
This PR introduces `InternalTestCluster.setBootstrapMasterNodeIndex`
which is suitable for all classes and copy-paste could be removed.
Removing code is always a good thing!
The terms aggregator loads the global ordinals to retrieve the cardinality of the field to aggregate on. This information is then used to select the strategy to use for the aggregation (breadth_first or depth_first). However this should be avoided if the execution_hint is explicitly set to map since this mode doesn't really need the global ordinals. Since we still need the cardinality of the field this change picks the maximum cardinality in the segments as an estimation of the total cardinality to select the strategy to use (breadth_first or depth_first). This estimation is only used if the execution hint is set to map, otherwise the global ordinals are still used to retrieve the accurate cardinality.
Closes#37705
Today we use `AbstractDisruptionTestCase` to test the behaviour of things like
master elections in the presence of cluster disruptions. These tests have
rather enthusiastic fault detection settings, detecting a fault if a single
ping fails, with a one-second timeout. Furthermore there are some tests that
assert the identity of the master remains unchanged during some disruption, and
these assertions fail rather often thanks to the overly sensitive fault
detector.
However in a number of these tests the fault detector need not be this
sensitive. This commit moves some such tests into their own test suite and uses
more sensible fault-detection settings to avoid the kind of master instability
that is causing CI failures.
Closes#37699
The self written epoch date formatters were not properly able to format
an Instant to a string due to a misconfiguration.
This fix also removes a until now existing runtime behaviour under java
8 regarding the names of the aggregation buckets, which are now the same
as before and have been under java 11.
The '{' as a first character in log line is causing problems for beats when parsing plaintext logs. This can happen if the submitted document has an additional '\n' at the beginning and we are not reformatting.
Trimming the source part of a SlogLog solves that and keeps the logs readable.
closes#38080
* Fixes two broken spots:
1. Master failover while deleting a snapshot that has no shards will get stuck if the new master finds the 0-shard snapshot in `INIT` when deleting
2. Aborted shards that were never seen in `INIT` state by the `SnapshotsShardService` will not be notified as failed, leading to the snapshot staying in `ABORTED` state and never getting deleted with one or more shards stuck in `ABORTED` state
* Tried to make fixes as short as possible so we can backport to `6.x` with the least amount of risk
* Significantly extended test infrastructure to reproduce the above two issues
* Two new test runs:
1. Reproducing the effects of node disconnects/restarts in isolation
2. Reproducing the effects of disconnects/restarts in parallel with shard relocations and deletes
* Relates #32265
* Closes#32348
Armin Braun
Daniel Mitterdorfer
David Turner
Adrien Grand
Yannick Welsch
Mayya Sharipova
Luca Cavanna
Tanguy Leroux
Tal Levy
Mark Tozzi
Lee Hinman
Simon Willnauer
Alan Woodward
Jason Tedor
Tim Brooks
Nhat Nguyen
Igor Motov
Evgenia Badyanova
Marios Trivyzas
Zachary Tong
Ignacio Vera
Mirko Jotic
Ioannis Kakavas
Henning Andersen
Hendrik Muhs
Alexander Reelsen
Jim Ferenczi
Albert Zaharovits
Martijn van Groningen
Christoph Büscher
David Roberts
Jake Landis
Przemyslaw Gomulka
Nick Knize
Like
Dimitris Athanasiou
Boaz Leskes
Julie Tibshirani
Yogesh Gaikwad
Gordon Brown
Andrey Ershov
Alpar Torok
Desmond Vehar