As acking can fail for any reason (unrelated node being too slow, node disconnecting), it should not
be required for acking to succeed in order for index requests with dynamic mapping updates to
successfully complete.
Relates to #30672 and Closes#30844
This commit removes the Index Audit Output type, following its deprecation
in 6.7 by 8765a31d4e6770. It also adds the migration notice (settings notice).
In general, the problem with the index audit output is that event indexing
can be slower than the rate with which audit events are generated,
especially during the daily rollovers or the rolling cluster upgrades.
In this situation audit events will be lost which is a terrible failure situation
for an audit system.
Besides of the settings under the `xpack.security.audit.index` namespace, the
`xpack.security.audit.outputs` setting has also been deprecated and will be
removed in 7. Although explicitly configuring the logfile output does not touch
any deprecation bits, this setting is made redundant in 7 so this PR deprecates
it as well.
Relates #29881
* Remove Custom Listeners from SnapshotsService
Motivations:
* Shorten the code some more
* Use ActionListener#wrap to get easy to reason about behavior in failure scenarios
* Remove duplication in the logic of handling snapshot completion listeners (listeners removing themselves and comparing snapshots to their targets)
* Also here, move all listener handling into `SnapshotsService` and remove custom listener class by putting listeners in a map
Today we support a smooth rolling upgrade from Zen1 to Zen2 by automatically
bootstrapping the cluster once all the Zen1 nodes have left, as long as the
`minimum_master_nodes` count is satisfied. However this means that Zen2 nodes
also require the `minimum_master_nodes` setting for this one specific and
transient situation.
Since nodes only perform this automatic bootstrapping if they previously
belonged to a Zen1 cluster, they can keep track of the `minimum_master_nodes`
setting from the previous master instead of requiring it to be set on the Zen2
node.
The filtering by follower index was completely broken.
Also the wrong persistent tasks were selected, causing the
wrong status to be reported.
Closes#37738
Currently integration tests which use either bwc snapshot versions or
the current version of elasticsearch depend on project substitutions to
link to the build of those artifacts. Likewise, vagrant tests use
dependency substitutions to get to bwc snapshots of rpm and debs.
This commit changes those to depend on the relevant project/configuration
and removes the dependency substitutions for distributions we do not
publish.
AuthenticateResponse did not allow unknown fields. This commit fixes the
test and ConstructingObjectParser such that it does now allow unknown
fields.
Relates #36938
The EmptyResponse is essentially the same as returning a boolean, which
is done in other places. This commit deprecates all the existing
EmptyResponse methods and creates new boolean methods that have method
params reordered so they can exist with the deprecated methods. A
followup PR in master will remove the existing deprecated methods, fix
the parameter ordering and deprecate the incorrectly ordered parameter
methods.
Relates #36938
The example plugins are currently built within the build-tools integ
tests as a means to ensure the gradle plugin works for external plugin
builds. These tests generate a dummy build.gradle, and a dummy local
maven repository to find the local builds dependencies in. Currently
that build-tools dependency uses "+" as the version. However, this
allows gradle to find the "latest" version, and unfortunately gradle has
its own plugin repository which is apparently connected to jcenter. This
recently triggered a flood of CI failures when jcenter suddenly pulled
alpha2, and all builds started trying to use that instead of the locally
built build-tools. This commit uses the explicit version of build-tools
that was build locally, which will cause resolution to stop when the
local repo is first checked.
- Add deprecation warning to RestGetFieldMappingAction
- Add two new java HRLC classes GetFieldMappingsRequest and
GetFieldMappingsResponse. These classes use new typeless forms
of a request and response, and differ in that from the server
versions.
Relates to #35190
Currently we have the ability to listen for setting changes to two group
affix settings. However, it is possible that we might have the need to
listen to more than two. This commit adds a method that allows consumer
to listen to a list of affix settings for changes.
Today we keep the mapping on the follower in sync with the leader's
using the mapping version from changes requests. There are two rare
cases where the mapping on the follower is not synced properly:
1. The returned mapping version (from ClusterService) is outdated than
the actual mapping. This happens because we expose the latest cluster
state in ClusterService after applying it to IndexService.
2. It's possible for the FollowTask to receive an outdated mapping than
the min_required_mapping. In that case, it should fetch the mapping
again; otherwise, the follower won't have the right mapping.
Relates to #31140
In some cases we only have a string collection instead of a string list
that we want to serialize out. We have a convenience method for writing
a list of strings, but no such method for writing a collection of
strings. Yet, a list of strings is a collection of strings, so we can
simply liberalize StreamOutput#writeStringList to be more generous in
the collections that it accepts and write out collections of strings
too. On the other side, we do not have a convenience method for reading
a list of strings. This commit addresses both of these issues.
* Add PersistentTasksClusterService::unassignPersistentTask method
* adding cancellation test
* Adding integration test for unallocating tasks from a node
* Addressing review comments
* adressing minor PR comments
Due to https://issues.apache.org/jira/browse/LUCENE-8634 this test
may fail if a really tiny polygon is generated. This commit checks for
tiny polygons and skips the final check, which is expected to fail
until the lucene bug is fixed and new version of lucene is released.
* Use ILM for Watcher history deletion
This commit adds an index lifecycle policy for the `.watch-history-*` indices.
This policy is automatically used for all new watch history indices.
This does not yet remove the automatic cleanup that the monitoring plugin does
for the .watch-history indices, and it does not touch the
`xpack.watcher.history.cleaner_service.enabled` setting.
Relates to #32041
Some steps, such as steps that delete, close, or freeze an index, may fail due to a currently running snapshot of the index. In those cases, rather than move to the ERROR step, we should retry the step when the snapshot has completed.
This change adds an abstract step (`AsyncRetryDuringSnapshotActionStep`) that certain steps (like the ones I mentioned above) can extend that will automatically handle a situation where a snapshot is taking place. When a `SnapshotInProgressException` is received by the listener wrapper, a `ClusterStateObserver` listener is registered to wait until the snapshot has completed, re-running the ILM action when no snapshot is occurring.
This also adds integration tests for these scenarios (thanks to @talevy in #37552).
Resolves#37541
* This test compleletly overrode the `reroute` method and hence did nothing put test the override itself
* Removed the test since it tests nothing and simplified `reroute` accordingly
This commit moves the collectSearchShards method out of RemoteClusterService into TransportSearchAction that currently calls it. RemoteClusterService used to be used only for cross-cluster search but is now also used in cross-cluster replication where different API are called through the RemoteClusterAwareClient. There is no reason for the collectSearchShards and fetchShards methods to be respectively in RemoteClusterService and RemoteClusterConnection. The search shards API can be called through the RemoteClusterAwareClient too, the only missing bit is a way to handle failures based on the skip_unavailable setting for each cluster (currently only supported in RemoteClusterConnection#fetchShards) which is achieved by adding a isSkipUnavailable(String clusterAlias) method to RemoteClusterService.
This change is useful for #32125 as we will very soon need to also call the search API against remote clusters, which will be done through RemoteClusterAwareClient. In that case we will also need to support skip_unavailable when calling the search API so we need some way to handle the skip_unavailable setting like we currently do for the search_shards call.
Relates to #32125
Today we have several implementations of executing SearchOperationListener
in SearchService. While all of them seem to be safe at least on, the one that
executes scroll searches can cause illegal execution of SearchOperationListener
that can then in-turn trigger assertions in ShardSearchStats. This change
adds a SearchOperationListenerExecutor that uses try-with blocks to ensure
listeners are called in a safe way.
Relates to #37185
With this commit we limit the update settings request to the index that
is used in `IndicesClientIT#testIndexPutSettings()`. This avoids
spurious exceptions involving other indices that might also be present
in the test cluster.
Closes#36931
Relates #37338
With this commit we add a note that explains when to use benchmarks and
point the reader to the macrobenchmarking tool Rally for further
information.
Relates #37694
This commit moves the aggregation and mapping code from joda time to
java time. This includes field mappers, root object mappers, aggregations with date
histograms, query builders and a lot of changes within tests.
The cut-over to java time is a requirement so that we can support nanoseconds
properly in a future field mapper.
Relates #27330
This change moves the update to the results index mappings
from the open job action to the code that starts the
autodetect process.
When a rolling upgrade is performed we need to update the
mappings for already-open jobs that are reassigned from an
old version node to a new version node, but the open job
action is not called in this case.
Closes#37607
The recently introduced client side PutMappingRequestTests has an edge case that
leads to failing tests. When the "source" or the original request is `null` it
gets rendered to xContent as an empty object, which by the test class itself is
parsed back as an empty map. For this reason the original and the parsed request
differ (one has an empty source, one an empty map). This fixes this edge case by
assuming an empty map means a null source in the request. In practice the
distinction doesn't matter because all the client side request does is write
itself to xContent, which gives the same result regardless of whether `source`
is null or empty.
Closes#37654
Users may require the sequence number and primary terms to perform optimistic concurrency control operations. Currently, you can get the sequence number via the `docvalues_fields` API but the primary term is not accessible because it is maintained by the `SeqNoFieldMapper` and the infrastructure can't find it.
This commit adds a dedicated sub fetch phase to return both numbers that is connected to a new `seq_no_primary_term` parameter.
While tests migration from Zen1 to Zen2, we've encountered this test.
This test is organized as follows:
Starts the first cluster node.
Starts the second cluster node.
Checks that license is active.
Interesting fact that adding assertLicenseActive(true) between 1
and 2 also makes the test pass.
assertLicenseActive retrieves XPackLicenseState from the nodes
and checks that active flag is set. It's set to true even before
the cluster is initialized.
So this test does not make sense.
1. testSimpleOnlyMasterNodeElection - requires cluster bootstrap when
the first master node is started.
2. testElectOnlyBetweenMasterNodes - requires cluster bootstrap when
the first master node is started and requires adding voting exclusion
before shutting down the first master node.
3. testAliasFilterValidation - requires cluster bootstrap when the
first master node is started.
It's not safe to continue writing state using MetaDataStateFormat
after dirty WriteStateException occurred if it's not recovered by
successful subsequent state write.
We've encountered test failure of testFailRandomlyAndReadAnyState.
The test breaks in the following way. There are 3 state paths. And what
happens next
Successful write at the beginning of the test yields 0 0 0 state
files in the directories.
1st write in the loop is unsuccessful, but not dirty - 0 0 0.
2nd write in the loop is not successful and dirty (failure during
fsync), however before removing new files we have 1 1 1. But now during
deletion, the first deletion fails and we get - 1 0 0.
3rd write in the loop is unsuccessful, but not dirty - so we want to
keep old generation, which happens to be the 1st generation, so now we
have 1 x x in state folders. Now we assert that we either load 0 or 1
state from the state folders and select only 2rd and 3th folder to
emulate disk failures - this results in NPE because there is nothing in
these folders.
Fortunately, this won’t be a problem in real life, because if there is
a dirty exception, we shut down the node and make sure we perform a
successful write on the node startup.
Simon Willnauer
Yulong
Alpar Torok
Yannick Welsch
Marios Trivyzas
Boaz Leskes
David Roberts
Albert Zaharovits
David Kyle
Armin Braun
David Turner
Martijn van Groningen
Ryan Ernst
Michael Basnight
Mayya Sharipova
Tim Brooks
Nhat Nguyen
Jason Tedor
Benjamin Trent
Igor Motov
Lee Hinman
Julie Tibshirani
Luca Cavanna
Daniel Mitterdorfer
Tanguy Leroux
Alexander Reelsen
Christoph Büscher
Andrey Ershov