Adds support for the `offset` parameter to the `date_histogram` source
of composite aggs. The `offset` parameter is supported by the normal
`date_histogram` aggregation and is useful for folks that need to
measure things from, say, 6am one day to 6am the next day.
This is implemented by creating a new `Rounding` that knows how to
handle offsets and delegates to other rounding implementations. That
implementation doesn't fully implement the `Rounding` contract, namely
`nextRoundingValue`. That method isn't used by composite aggs so I can't
be sure that any implementation that I add will be correct. I propose to
leave it throwing `UnsupportedOperationException` until I need it.
Closes#48757
* Docs: Refine note about `after_key`
I was curious about composite aggregations, specifically I wanted to
know how to write a composite aggregation that had all of its buckets
filtered out so you *had* to use the `after_key`. Then I saw that we've
declared composite aggregations not to work with pipelines in #44180. So
I'm not sure you *can* do that any more. Which makes the note about
`after_key` inaccurate. This rejiggers that section of the docs a little
so it is more obvious that you send the `after_key` back to us. And so
it is more obvious that you should *only* use the `after_key` that we
give you rather than try to work it out for yourself.
* Apply suggestions from code review
Co-Authored-By: James Rodewig <james.rodewig@elastic.co>
Co-authored-by: James Rodewig <james.rodewig@elastic.co>
Co-authored-by: Daniel Huang <danielhuang@tencent.com>
This is a spinoff of #48130 that generalizes the proposal to allow early termination with the composite aggregation when leading sources match a prefix or the entire index sort specification.
In such case the composite aggregation can use the index sort natural order to early terminate the collection when it reaches a composite key that is greater than the bottom of the queue.
The optimization is also applicable when a query other than match_all is provided. However the optimization is deactivated for sources that match the index sort in the following cases:
* Multi-valued source, in such case early termination is not possible.
* missing_bucket is set to true
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
Adds some validation to prevent duplicate source names from being
used in the composite agg.
Also refactored to use a ConstructingObjectParser and removed the
private ctor and setter for sources, making it mandatory.
This changes adds the support to handle `nested` fields in the `composite`
aggregation. A `nested` aggregation can be used as parent of a `composite`
aggregation in order to target `nested` fields in the `sources`.
Closes#28611
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
* Replace custom type names with _doc in REST examples.
* Avoid using two mapping types in the percolator docs.
* Rename doc -> _doc in the main repository README.
* Also replace some custom type names in the HLRC docs.
This change adds a new option to the composite aggregation named `missing_bucket`.
This option can be set by source and dictates whether documents without a value for the
source should be ignored. When set to true, documents without a value for a field emits
an explicit `null` value which is then added in the composite bucket.
The `missing` option that allows to set an explicit value (instead of `null`) is deprecated in this change and will be removed in a follow up (only in 7.x).
This commit also changes how the big arrays are allocated, instead of reserving
the provided `size` for all sources they are created with a small intial size and they grow
depending on the number of buckets created by the aggregation:
Closes#29380
This change refactors the composite aggregation to add an execution mode that visits documents in the order of the values
present in the leading source of the composite definition. This mode does not need to visit all documents since it can early terminate
the collection when the leading source value is greater than the lowest value in the queue.
Instead of collecting the documents in the order of their doc_id, this mode uses the inverted lists (or the bkd tree for numerics) to collect documents
in the order of the values present in the leading source.
For instance the following aggregation:
```
"composite" : {
"sources" : [
{ "value1": { "terms" : { "field": "timestamp", "order": "asc" } } }
],
"size": 10
}
```
... can use the field `timestamp` to collect the documents with the 10 lowest values for the field instead of visiting all documents.
For composite aggregation with more than one source the execution can early terminate as soon as one of the 10 lowest values produces enough
composite buckets. For instance if visiting the first two lowest timestamp created 10 composite buckets we can early terminate the collection since it
is guaranteed that the third lowest timestamp cannot create a composite key that compares lower than the one already visited.
This mode can execute iff:
* The leading source in the composite definition uses an indexed field of type `date` (works also with `date_histogram` source), `integer`, `long` or `keyword`.
* The query is a match_all query or a range query over the field that is used as the leading source in the composite definition.
* The sort order of the leading source is the natural order (ascending since postings and numerics are sorted in ascending order only).
If these conditions are not met this aggregation visits each document like any other agg.
This change adds the `after_key` of a composite aggregation directly in the response.
It is redundant when all buckets are not filtered/removed by a pipeline aggregation since in this case the `after_key` is always the last bucket
in the response. Though when using a pipeline aggregation to filter composite buckets, the `after_key` can be lost if the last bucket is filtered.
This commit fixes this situation by always returning the `after_key` in a dedicated section.
This commit adds the ability to specify a date format on the `date_histogram` composite source.
If the format is defined, the key for the source is returned as a formatted date.
Closes#27923
* This change adds a module called `aggs-composite` that defines a new aggregation named `composite`.
The `composite` aggregation is a multi-buckets aggregation that creates composite buckets made of multiple sources.
The sources for each bucket can be defined as:
* A `terms` source, values are extracted from a field or a script.
* A `date_histogram` source, values are extracted from a date field and rounded to the provided interval.
This aggregation can be used to retrieve all buckets of a deeply nested aggregation by flattening the nested aggregation in composite buckets.
A composite buckets is composed of one value per source and is built for each document as the combinations of values in the provided sources.
For instance the following aggregation:
````
"test_agg": {
"terms": {
"field": "field1"
},
"aggs": {
"nested_test_agg":
"terms": {
"field": "field2"
}
}
}
````
... which retrieves the top N terms for `field1` and for each top term in `field1` the top N terms for `field2`, can be replaced by a `composite` aggregation in order to retrieve **all** the combinations of `field1`, `field2` in the matching documents:
````
"composite_agg": {
"composite": {
"sources": [
{
"field1": {
"terms": {
"field": "field1"
}
}
},
{
"field2": {
"terms": {
"field": "field2"
}
}
},
}
}
````
The response of the aggregation looks like this:
````
"aggregations": {
"composite_agg": {
"buckets": [
{
"key": {
"field1": "alabama",
"field2": "almanach"
},
"doc_count": 100
},
{
"key": {
"field1": "alabama",
"field2": "calendar"
},
"doc_count": 1
},
{
"key": {
"field1": "arizona",
"field2": "calendar"
},
"doc_count": 1
}
]
}
}
````
By default this aggregation returns 10 buckets sorted in ascending order of the composite key.
Pagination can be achieved by providing `after` values, the values of the composite key to aggregate after.
For instance the following aggregation will aggregate all composite keys that sorts after `arizona, calendar`:
````
"composite_agg": {
"composite": {
"after": {"field1": "alabama", "field2": "calendar"},
"size": 100,
"sources": [
{
"field1": {
"terms": {
"field": "field1"
}
}
},
{
"field2": {
"terms": {
"field": "field2"
}
}
}
}
}
````
This aggregation is optimized for indices that set an index sorting that match the composite source definition.
For instance the aggregation above could run faster on indices that defines an index sorting like this:
````
"settings": {
"index.sort.field": ["field1", "field2"]
}
````
In this case the `composite` aggregation can early terminate on each segment.
This aggregation also accepts multi-valued field but disables early termination for these fields even if index sorting matches the sources definition.
This is mandatory because index sorting picks only one value per document to perform the sort.
James Rodewig
Mark Tozzi
James Rodewig
Adam Locke
Benjamin Trent
Nik Everett
Jim Ferenczi
Lisa Cawley
Zachary Tong
Zachary Tong
Christoph Büscher
Julie Tibshirani
Sue Gallagher
Tim Roes
Jim Ferenczi
Shaunak Kashyap
Clinton Gormley