Prior to this commit (and after 6.5.0), if an ingest node changes
the _index in a pipeline, the original target index would be created.
For daily indexes this could create an extra, empty index per day.
This commit changes the TransportBulkAction to execute the ingest node
pipeline before attempting to create the index. This ensures that the
only index created is the original or one set by the ingest node pipeline.
This was the execution order prior to 6.5.0 (#32786).
The execution order was changed in 6.5 to better support default pipelines.
Specifically the execution order was changed to be able to read the settings
from the index meta data. This commit also includes a change in logic such
that if the target index does not exist when ingest node pipeline runs, it
will now pull the default pipeline (if one exists) from the settings of the
best matched of the index template.
Relates #32786
Relates #32758Closes#36545
This commit introduces the forget follower API. This API is needed in cases that
unfollowing a following index fails to remove the shard history retention leases
on the leader index. This can happen explicitly through user action, or
implicitly through an index managed by ILM. When this occurs, history will be
retained longer than necessary. While the retention lease will eventually
expire, it can be expensive to allow history to persist for that long, and also
prevent ILM from performing actions like shrink on the leader index. As such, we
introduce an API to allow for manual removal of the shard history retention
leases in this case.
We need to unwrap and use the actual cause when determining if the node
with primary shard is shutting down because TransportService will throw
a TransportException wrapped in a SendRequestTransportException.
Relates #39584
Today when a replicated write operation fails to execute on a replica,
the primary will reach out to the master to fail that replica (and mark
it stale). We then won't ack that request until the master removes the
failing replica; otherwise, we will lose the acked operation if the
failed replica is still in the in-sync set. However, if a node with the
primary is shutting down, we might ack such request even though we are
unable to send a shard-failure request to the master. This happens
because we ignore NodeClosedException which is triggered when the
ClusterService is being closed.
Closes#39467
This adds the capability to snapshot replicated closed indices.
It also changes snapshot requests in v8.0.0 to automatically expand wildcards to closed indices and hence start snapshotting closed indices by default. For v7.1.0 and above, wildcards are by default only expanded to open indices, which can be changed by explicitly setting the expand_wildcards option either to all or closed.
Note that indices are always restored as open indices, even if they have been snapshotted as closed replicated indices.
Relates to #33888
Lucene added an optimization to leave the term dictionary on disk
for non-id like fields. This change happened very late in the release
processes such that it's better to have an escape hatch if certain
use-cases are hurt by this optimization. This setting might be
removed in the future if it turns out to be unnecessary.
Currently SearchServiceTests.testCloseSearchContextOnRewriteException can fail
if a refresh happens while we test for the SearchPhaseExecutionException that is
thrown later in the test. The test takes the current Store#refCount and expects
it to be the same after the exception is thrown. If a refresh happens in that
interval however, the refCound will be different, causing the test to fail. This
can be provoked e.g. by running this section in a tight loop.
Switching of refresh for this tests solves the issue.
When preparing the state to send to other nodes, we're serializing it
for each node, despite using putIfAbsent.
This commit checks if the state was already serialized for this node
version before performing the potentially expensive computation.
The map is not used by multiple threads, so computeIfAbsent is not
needed (and could not be used here easily, because IOException could
be thrown).
(cherry picked from commit c99be63b43f5250f3cd220130df73c5e9e097459)
When a node is joining the cluster we ensure that it can send requests to the
master _at that time_. If it joins the cluster and _then_ loses the ability to
send requests to the master then it should be removed from the cluster. Today
this is not the case: the master can still receive responses to its follower
checks, and receives acknowledgements to cluster state publications, so has no
reason to remove the node.
This commit changes the handling of follower checks so that they fail if they
come from a master that the other node was following but which it now believes
to have failed.
Today the `GroupedActionListener` accepts a `defaults` parameter but all
callers pass an empty list. Also it is permitted to pass an empty group but
this is trappy because the delegated listener is never be called in that case.
This commit removes the `defaults` parameter and forbids an empty group.
* Optimize Bulk Message Parsing and Message Length Parsing
* findNextMarker took almost 1ms per invocation during the PMC rally track
* Fixed to be about an order of magnitude faster by using Netty's bulk `ByteBuf` search
* It is unnecessary to instantiate an object (the input stream wrapper) and throw it away, just to read the `int` length from the message bytes
* Fixed by adding bulk `int` read to BytesReference
This commit renames the retention lease setting
index.soft_deletes.retention.lease so that it is under the namespace
index.soft_deletes.retention_lease. As such, we rename the setting to
index.soft_deletes.retention_lease.period.
This commit adds a new build type (together with deb/rpm/tar/zip) to
represent the official Docker images. This build type will be displayed
in APIs such as the main and nodes info APIs.
In case multiple completion suggestion entries have the same score and
surface form, the order in which such options will be returned is
currently not deterministic.
With this commmit we introduce tie-breaking for such situations, based
on shard id, index name, index uuid and doc id like we already do for
ordinary search hits. With this change we also make shardIndex
mandatory when sorting and comparing completion suggestion options,
which was previously only needed later when fetching hits).
Also, we need to make sure shardIndex is properly set when merging
completion suggestions coming from multiple clusters in
`SearchResponseMerger`
* Soften redundant cast to allow use of `DeterministicTaskQueue` in this class for #39504
* Remove two redundant variables and lower visibility in two possible spots
* Make field `final`
Currently Fuzziness#asDistance(String) doesn't work for custom AUTO values. If
the fuzziness is AUTO, the method returns the correct edit distance to use,
depending on the input string, but for custom AUTO values it currently always
returns an edit distance of 1. Correcting this and adding unit and integration
tests to catch these cases.
Closes#39614
Today we have no chance to fetch actual segment stats for segments that
are currently unloaded. This is relevant in the case of frozen indices.
This allows to monitor how much memory a frozen index would use if it was
unfrozen.
The match interval builder analyses input text and converts it to an IntervalSource, and as such
may generate token streams with stopwords. This commit deals with these by using the extend
factory to cover the gaps produced by these stopwords so that phrase and ordered queries work
correctly.
`TopDocsCollectorContext` can already shortcut hit counts on `match_all` and `term` queries when there are no deletions.
This change adds this ability for `exists` queries if the index doesn't have deletions and fields are indexed.
Closes#37475
While serializing custom objects, the length of the list is computed after
filtering out the unsupported objects but while writing objects the filter
is not applied thus resulting in writing unsupported objects which will fail
to deserialize by the receiever. Adding the condition to filter out unsupported
custom objects.
Since #39006 we should be able to complete a peer-recovery without
waiting for pending indexing operations. Thus, the assertion in
testDoNotWaitForPendingSeqNo should be updated from false to true.
Closes#39510
This is now possible as Lucene's `TotalHits` implements `equals`/`hashcode`,
all the other methods can be in-lined in `SearchHits` instead, no need for
a specific wrapper class.
* Introduce Safer Chaining of Listeners
* The motivation here is to make reasoning about chains of `ActionListener` a little easier, by providing a safe method for nesting `ActionListener` that guarantees that a response is never dropped. Also, it dries up the code a little by removing the need to repeat `listener::onFailure` and `listener.onResponse` over and over.
* Refactored a number of obvious/easy spots to use the new listener constructor
Zen1IT#testFreshestMasterElectedAfterFullClusterRestart fails sometimes because
we request the cluster state before state recovery has completed, and therefore
obtain the default value for the setting we're relying on.
Confusingly, we were starting out by setting this setting to its default value,
so the test looked like it was failing because of a production bug. This commit
avoids this confusion in future by setting it to a non-default value at the
start of the test.
Fixes#39586.
This commit adds the following:
- more tests to IndicesServiceCloseTests, one of them found a bug in the order
in which `IndicesQueryCache#onClose` and
`IndicesService.indicesRefCount#decRef` are called.
- made `IndicesQueryCache.stats2` a synchronized map. All writes to it are
already protected by the lock of the Lucene cache, but the final read from
an assertion in `IndicesQueryCache#close()` was not so this change should
avoid any potential visibility issues.
- human-readable `toString`s to make debugging easier.
Relates #37117
This cleans up the Engine implementation by separating the sequence number generation from the
planning step in the engine, to avoid for the planning step to have any side effects. This makes it
easier to see that every sequence number is properly accounted for.
Add debug log when index is flushed to investigate a failure
in IndicesRequestCacheIT
"DEBUG" level is used as "TRACE" produces too much output irrelevant for this
issue
Relates to #32827
Backport support for replicating closed indices (#39499)
Before this change, closed indexes were simply not replicated. It was therefore
possible to close an index and then decommission a data node without knowing
that this data node contained shards of the closed index, potentially leading to
data loss. Shards of closed indices were not completely taken into account when
balancing the shards within the cluster, or automatically replicated through shard
copies, and they were not easily movable from node A to node B using APIs like
Cluster Reroute without being fully reopened and closed again.
This commit changes the logic executed when closing an index, so that its shards
are not just removed and forgotten but are instead reinitialized and reallocated on
data nodes using an engine implementation which does not allow searching or
indexing, which has a low memory overhead (compared with searchable/indexable
opened shards) and which allows shards to be recovered from peer or promoted
as primaries when needed.
This new closing logic is built on top of the new Close Index API introduced in
6.7.0 (#37359). Some pre-closing sanity checks are executed on the shards before
closing them, and closing an index on a 8.0 cluster will reinitialize the index shards
and therefore impact the cluster health.
Some APIs have been adapted to make them work with closed indices:
- Cluster Health API
- Cluster Reroute API
- Cluster Allocation Explain API
- Recovery API
- Cat Indices
- Cat Shards
- Cat Health
- Cat Recovery
This commit contains all the following changes (most recent first):
* c6c42a1 Adapt NoOpEngineTests after #39006
* 3f9993d Wait for shards to be active after closing indices (#38854)
* 5e7a428 Adapt the Cluster Health API to closed indices (#39364)
* 3e61939 Adapt CloseFollowerIndexIT for replicated closed indices (#38767)
* 71f5c34 Recover closed indices after a full cluster restart (#39249)
* 4db7fd9 Adapt the Recovery API for closed indices (#38421)
* 4fd1bb2 Adapt more tests suites to closed indices (#39186)
* 0519016 Add replica to primary promotion test for closed indices (#39110)
* b756f6c Test the Cluster Shard Allocation Explain API with closed indices (#38631)
* c484c66 Remove index routing table of closed indices in mixed versions clusters (#38955)
* 00f1828 Mute CloseFollowerIndexIT.testCloseAndReopenFollowerIndex()
* e845b0a Do not schedule Refresh/Translog/GlobalCheckpoint tasks for closed indices (#38329)
* cf9a015 Adapt testIndexCanChangeCustomDataPath for replicated closed indices (#38327)
* b9becdd Adapt testPendingTasks() for replicated closed indices (#38326)
* 02cc730 Allow shards of closed indices to be replicated as regular shards (#38024)
* e53a9be Fix compilation error in IndexShardIT after merge with master
* cae4155 Relax NoOpEngine constraints (#37413)
* 54d110b [RCI] Adapt NoOpEngine to latest FrozenEngine changes
* c63fd69 [RCI] Add NoOpEngine for closed indices (#33903)
Relates to #33888
With #17187, we verified IndexService creation during initial state recovery on the master and if the
recovery failed the index was imported as closed, not allocating any shards. This was mainly done to
prevent endless allocation loops and full log files on data-nodes when the indexmetadata contained
broken settings / analyzers. Zen2 loads the cluster state eagerly, and this check currently runs on all
nodes (not only the elected master), which can significantly slow down startup on data nodes.
Furthermore, with replicated closed indices (#33888) on the horizon, importing the index as closed
will no longer not allocate any shards. Fortunately, the original issue for endless allocation loops is
no longer a problem due to #18467, where we limit the retries of failed allocations. The solution here
is therefore to just undo #17187, as it's no longer necessary, and covered by #18467, which will solve
the issue for Zen2 and replicated closed indices as well.
Mutations of the timeout values were using string-representations.
This resulted in very rare cases where the original timeout value was
represented as something like "0ms" and the new random time-value generated
was "0s". Although their string representations differ, their underlying
TimeValue does not. This resulted in `-Dtests.seed=7F4C034C43C22B1B` to
fail.
This adds a `details` parameter to shard locking in `NodeEnvironment`. This is
intended to be used for diagnosing issues such as
```
1> [2019-02-11T14:34:19,262][INFO ][o.e.c.m.MetaDataDeleteIndexService] [node_s0] [.tasks/oSYOG0-9SHOx_pfAoiSExQ] deleting index
1> [2019-02-11T14:34:19,279][WARN ][o.e.i.IndicesService ] [node_s0] [.tasks/oSYOG0-9SHOx_pfAoiSExQ] failed to delete index
1> org.elasticsearch.env.ShardLockObtainFailedException: [.tasks][0]: obtaining shard lock timed out after 0ms
1> at org.elasticsearch.env.NodeEnvironment$InternalShardLock.acquire(NodeEnvironment.java:736) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.shardLock(NodeEnvironment.java:655) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.lockAllForIndex(NodeEnvironment.java:601) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.deleteIndexDirectorySafe(NodeEnvironment.java:554) ~[main/:?]
```
In the hope that we will be able to determine why the shard is still locked.
Relates to #30290 as well as some other CI failures
David Roberts
David Turner
Jake Landis
Jason Tedor
Armin Braun
Nhat Nguyen
markharwood
Yannick Welsch
Simon Willnauer
Christoph Büscher
Andrey Ershov
Luca Cavanna
Jim Ferenczi
Gordon Brown
Alan Woodward
Prabhakar S
Daniel Mitterdorfer
Adrien Grand
Mayya Sharipova
Tanguy Leroux
Tal Levy
Mark Tozzi
Lee Hinman