We quoted some strings in the Windows elasticsearch-env script but echo
on Windows includes these quotes in the output. This commit removes
these quotes, they do not need to be output and are noise. Note that one
of the commands is wrapped in parentheses, this is to make obvious that
the space at the end of the corresponding line is intentionally there.
The error message for warning about the use of JAVA_TOOL_OPTIONS on
Windows incorrectly uses $JAVA_TOOL_OPTIONS to dereference the
environment variable JAVA_TOOL_OPTIONS; on Windows it should be
%JAVA_TOOL_OPTIONS%.
This instruction tells systemd to create a directory /var/run/elasticsearch before starting Elasticsearch.
Without this change, the default PID_DIR (/var/run/elasticsearch) may not exist, and without it, Elasticsearch will fail to start.
The environment variable CONF_DIR was previously inconsistently used in
our packaging to customize the location of Elasticsearch configuration
files. The importance of this environment variable has increased
starting in 6.0.0 as it's now used consistently to ensure Elasticsearch
and all secondary scripts (e.g., elasticsearch-keystore) all use the
same configuration. The name CONF_DIR is there for legacy reasons yet
it's too generic. This commit renames CONF_DIR to ES_PATH_CONF.
Relates #26197
In bin/elasticsearch, we grep the command line looking for various flags
that indicate the process should be daemonized. To do this, we simply
test command status from the grep. Sadly, this is utterly broken
(unreleased) as instead we are testing the output of the command, not
the command status. This commit fixes this issue.
Relates #26196
Today our shell scripts march on if they encounter an error during
execution. One place that this actually causes a problem is with the
Java version checker. What can happen is this: if the user botches their
installation so that the JavaVersionChecker can not be found on the
classpath, when we attempt to run the Java version checker, first an
error message that the class can not be found is displayed, and then we
print a message that their version of Java is not compatible; this
happens even if they are using a Java 8 installation. The problem is
that we should have immediately aborted when the class could not be
loaded. Since we do not exit when the shell script encounters an error,
we end up conflating failue to run the version check with a failed
version check. Instead, we really should abort the moment that one of
our scripts encounters an error. To do this, we make the following
changes:
- enable set -e and set -o pipefail
- make the Java version checker responsible for printing the error
message to the console
- remove the exit status check from the scripts
- actually on Windows, we still have to check the exit status because
there is no equivalent of set -e
- when we check for daemonization, we can no longer check the exit
status from grep because a failed grep will abort the script;
instead, we move the grep execution to be the condition for the if as
this does not trip the set -e failure conditions
- we should source elasticsearch-env before doing anything, so we move
the definition of parse_jvm_options below sourcing elasticsearch-env
- we make consistent all places where we use a subshell to use
backticks
Relates #26057
We have a bootstrap check for the maximum size of the virtual memory
address space for the Elasticsearch process. We can set this in the
service file for Elasticsearch when installed as a service on
systemd-based systems for a better user experience than them fumbling
through thinking they should set this via /etc/security/limits.d (as a
lot of pages on the Internet would tell them) not realizing that systemd
completely ignores these for services and then trying to figure out how
to add a unit file for the Elasticsearch service.
Relates #25975
The systemd service file that ships with Elasticsearch installs on
systemd-based systems contains a suggestion for setting LimitMEMLOCK if
the user wants to enable bootstrap.memory_lock. However, this setting
this in the installed service file goes against best practices for
working with systemd, and goes against our existing documentation for
how to set this. Therefore, we should not have this suggestion in the
service file otherwise users might be led to think they should edit it
there.
Relates #25979
On non-Windows platforms, we ignore the environment variable
JAVA_TOOL_OPTIONS (this is an environment variable that the JVM respects
by default for picking up extra JVM options). The primary reason that we
ignore this because of the Jayatana agent on Ubuntu; a secondary reason
is that it produces an annoying "Picked up JAVA_TOOL_OPTIONS: ..."
output message. When the elasticsearch-env batch script was introduced
for Windows, ignoring this environment variable was deliberately not
carried over as the primary reason does not apply on Windows. However,
after additional thinking, it seems that we should simply be consistent
to the extent possible here (and also avoid that annoying "Picked up
JAVA_TOOL_OPTIONS: ..." on Windows too). This commit causes the Windows
version of elasticsearch-env to also ignore JAVA_TOOL_OPTIONS.
Relates #25968
This commit adds a bootstrap check for the maximum file size, and
ensures the limit is set correctly when Elasticsearch is installed as a
service on systemd-based systems.
Relates #25974
When invoking the elasticsearch-env.bat batch script on Windows, if the
script exits due to an error (e.g., Java can not be found, or the wrong
version of Java is found), then the script exits. Sadly, on Windows,
this does not also terminate the caller, instead returning control. This
means we have to explicitly exit so that is what we do in this commit.
Relates #25959
Today we strip some ignored JVM options before starting the main Java
process (e.g., we unset JAVA_TOOL_OPTIONS, and we ignore
JAVA_OPTS). However, there is another Java process that we start before
starting the main process: the Java version checker. We are currently
starting this before ignoring the undesired JVM options so the Java
version checker will pick up JAVA_TOOL_OPTIONS and it will silently
ignore JAVA_OPTS. Instead, we should ignore JAVA_TOOL_OPTIONS here too,
and not silently ignore JAVA_OPTS but instead warn before doing so (as
we already do for the main Java process). This commit rearranges the
execution of these steps so that we do the right thing here.
Relates #25969
This commit removes a legacy check against running bin/elasticsearch
that is not produced from a distribution. This check exists for legacy
reasons, namely when bin/elasticsearch previously sat in the root of the
Elasticsearch repository. In this old scenario, someone might clone the
repository, see the bin folder and try to run bin/elasticsearch without
first production a distribution. Today, this is unlikely since
bin/elasticsearch now sits in
distribution/src/main/resources/bin/elasticsearch so first, bin is no
longer in the root of the repository, and second, the src indicates this
is source and not already for production. Moreover, our README in the
root of the repository provides clear instructions for getting started:
either download a distribution or build one from source. In the name of
simplicity, we therefore remove this legacy check.
Relates #25960
This commit cleans up a few items with the script packaging:
- remove the now dead elasticsearch.in.sh script
- add assertions for the existence elasticsearch-env and
elasticsearch-keystore
This commit addresses a change in core Elasticsearch where the
command-line flag --path.conf is no longer respected. Instead, the
configuration path must be passed through the system property
es.path.conf. We adapt the Windows batch file and the service for this
change.
A previous change enabled it so that users could configure the
configuration path via a command-line option --path.conf. However, a
subsequent change has made it so that we expect users to set the
configuration path via the environment variable CONF_DIR. To enable
this, we now pass the value of CONF_DIR as the value for the
command-line option --path.conf. This has two problems:
- the presence of --path.conf always being on the command line breaks
other flags like --help for multi-commands
- the scripts for which --help is not broken say that you can pass
--path.conf but this is a lie since passing it will make it appear
twice in the command-line arguments breaking the script
Since --path.conf is no longer the way that we want users to set the
configuration path, we should remove the --path.conf option. However, we
still need a way to get the configuration path from the scripts to the
running Java process. To do this, we now pass the configuration path as
a system property. This keeps it off the script command line fixing the
above problems.
The only remaining question (that I can see) is whether or not to
respect -Des.path.conf=<some path> if the user sets this in their
jvm.options or via ES_JAVA_OPTS. I think that we should not do this (as
has been our tradition), es.path.home and es.path.conf are special,
should be set by our scripts only so users should not be setting them at
all so we should not take any effort to respect these flags if the user
tries to otherwise use them.
Relates #25943
When running a script that depends on elasticsearch-env, the
elasticsearch-env script seeks backwards from the directory containing
the script to find Elasticsearch home. This is done by seeking backwards
in the path to find bin, and then going one directory above
that. Unfortunately, if the script is started relatively from the bin
directory, then bin will appear in the path since it is a relative
path. This commit fixes this by making the starting path absolute before
attempting to seek backwards.
The quoting for the ExecStart entry is broken as quotes must wrap an
entire argument, and arguments are separated by spaces. It turns out
that any quoting is unnecessary here, systemd will handle it correctly
either way.
This commit introduces the elasticsearch-env script. The purpose of this
script is threefold:
- vastly simplify the various scripts used in Elasticsearch
- provide a script that can be included in other scripts in the
Elasticsearch ecosystem (e.g., plugins)
- correctly establish the environment for all scripts (e.g., so that
users can run `elasticsearch-keystore` from a package distribution
without having to worry about setting `CONF_DIR` first, otherwise the
keystore would be created in the wrong location)
Relates #25815
This commit fixes the elasticsearch-keystore script handling of
path.conf; the problem here is that the script is setting a system
property that is completely unobserved. Instead, we use the path.conf
command line flag.
Relates #25811
This commit removes legacy checks for unsupported an environment
variable and unsupported system properties. This environment variable
and these system properties have not been supported since 1.x so it is
safe to stop checking for the existence of these settings.
Relates #25809
Today we explicitly export the HOSTNAME variable from scripts. This is
probably a relic from the days when the scripts were not run on bash but
instead assume a POSIX-compliant shell only where HOSTNAME is not
guaranteed to exist. Yet, bash guarantees that HOSTNAME is set so we do
not need to set it in scripts. This commit removes this legacy.
Relates #25807
Today we enable users to customize the environment through the use of
ES_INCLUDE. This made sense for legacy reasons when we did not have
nicities like jvm.options (so dumped JVM options in the default include
script) and somewhat duplicates some of the functionality that we will
need from a dedicated environment script. This commit removes support
for ES_INCLUDE as a first step towards a dedicated include script.
Relates #25804
The problem here is simple: when using direct buffers as in NIO, the JDK
relies on explict GC invocataions to trigger cleaning up direct buffers;
if such GCs do not occur and the direct buffer limit is reached, the JVM
will throw an out of memory exception. With explicit GCs disabled, the
JVM is neutered from explicitly cleaning up direct buffers in the act of
reserving a new direct buffer and instead relies on a GC occurring for
another reason. If such a GC never occurs, the JVM will OOM. This commit
removes disabling of explicit GCs. Note that these explicit GCs only
occur as a last ditch effort before going OOM when the JVM is trying to
reserve more direct memory. This is a known issue, see for example:
JDK-8142537.
Relates #25759
This commit enables management of the main Elasticsearch log files
out-of-the-box by the following changes:
- compress rolled logs
- roll logs every 128 MB
- maintain a sliding window of logs
- remove the oldest logs maintaining no more than 2 GB of compressed
logs on disk
Relates #25660
This commit removes the environment variable ES_JVM_OPTIONS that allows
the jvm.options file to sit separately from the rest of the config
directory. Instead, we use the CONF_DIR environment variable for custom
configuration location just as we do for the other configuration files.
Relates #25679
On Debian-based systems the install scripts are run with set -e meaning
that if there is an error in executing one of these scripts then the
script fails. If systemd-sysctl is masked then trying to restart the
systemd-sysctl service to pick up the changes to vm.max_map_count will
fail leading to the post-install script failing. Instead, we should
account for the possbility of failure here by not letting the command to
restart this service exit with non-zero status code. This commit does
this, and adds a test for this situation.
Relates #25657
We previously tried to maintain (while not formally supporting) 32-bit
support, although we never tested this anywhere in CI. Since we do not
formally support this, and 32-bit usage is very low, we have elected to
no longer maintain 32-bit support. This commit removes any implication
of 32-bit support.
Relates #25435
This commit removes the default path settings for data and logs. With
this change, we now ship the packages with these settings set in the
elasticsearch.yml configuration file rather than going through the
default.path.data and default.path.logs dance that we went through in
the past.
Relates #25408
This commit removes path.conf as a valid setting and replaces it with a
command-line flag for specifying a non-default path for configuration.
Relates #25392
When JAVA_HOME is not set we try to detect the location of Java. If its
location contains a space, due to a lack of quoting we will be
unsuccessful in invoking Java. This commit adds the necessary quoting to
handle this case.
Relates #23822
This prevents possible race conditions between the Elasticsearch JVM and
plugin native controller processes that can cause the Elasticsearch shutdown
to hang. The problem can happen when the JVM and the controller process
receive a SIGTERM at almost the same time.
(There's an assumption here that Elasticsearch will continue to use other
mechanisms to kill native controller processes.)
During package install on systemd-based systems, some sysctl settings
should be set (e.g. vm.max_map_count).
In some environments, changing sysctl settings plainly does not work;
previously a global environment variable named
ES_SKIP_SET_KERNEL_PARAMETERS was introduced to skip calling sysctl, but
this causes trouble for:
- configuration management systems, which usually cannot apply an env
var when running a package manager
- package upgrades, which will not have the env var set any more, and
thus leaving the package management system in a bad state (possibly
half-way upgraded, can be very hard to recover)
This removes the env var again and instead of calling systemd-sysctl
manually, tells systemd to restart the wrapper unit - which itself can
be masked by system administrators or management tools if it is known
that sysctl does not work in a given environment.
The restart is not silent on systems in their default configuration, but
is ignored if the unit is masked.
Relates #24234
We had a hack in setting up permissions for tests to support testing
the lang-python plugin. We also had a hack to prevent Log4j from
loading a shaded version of Jansi provided by Jython. This plugin has
been removed so these hacks are no longer necessary.
Relates #24681
This adds `-XX:-OmitStackTraceInFastThrow` to the JVM arguments
which *should* prevent the JVM from omitting stack traces on
common exception sites. Even though these sites are common, we'd
still like the exceptions to debug them.
This also adds the flag when running tests and adapts some tests
that had workarounds for the absense of the flag.
Closes#24376
After the removal of the joda time hack we used to have, we can cleanup
the codebase handling in security, jarhell and plugins to be more picky
about uniqueness. This was originally in #18959 which was never merged.
closes#18959
Today when users start Elasticsearch with their Java configuration
pointing to a pre-Java 8 install, they encounter a cryptic message:
Exception in thread "main" java.lang.UnsupportedClassVersionError:
org/elasticsearch/bootstrap/Elasticsearch : Unsupported major.minor
version 52.0
They often think that they have Java 8 installed but if their JAVA_HOME
or other configuration is causing them to start with a pre-Java 8
install, this error message does not help them.
We introduce a Java version checker that runs on Java 6 as part of the
startup scripts. If the Java version is pre-Java 8, we can display a
helpful error message to the user informing them of the Java version
that the runtime was started with. Otherwise, Elasticsearch starts as it
does today.
By default, the JVM GC log file grows without
limitation. This is inconvenient for a long running
process like Elasticsearch.
With this commit we add an example configuration
for a rotating GC log in `conig/jvm.options`.
For certain situations, end-users need the base path for Elasticsearch
logs. Exposing this as a property is better than hard-coding the path
into the logging configuration file as otherwise the logging
configuration file could easily diverge from the Elasticsearch
configuration file. Additionally, Elasticsearch will only have
permissions to write to the log directory configured in the
Elasticsearch configuration file. This commit adds a property that
exposes this base path.
One use-case for this is configuring a rollover strategy to retain logs
for a certain period of time. As such, we add an example of this to the
documentation.
Additionally, we expose the property es.logs.cluster_name as this is
used as the name of the log files in the default configuration.
Finally, we expose es.logs.node_name in cases where node.name is
explicitly set in case users want to include the node name as part of
the name of the log files.
Relates #22625
The config template that ships with Elasticsearch distributions contains
links to various pieces of documentation. Links go out of date and get
broken. This commit removes such links from the config template.
Relates #22553
This commit reverts switching to the unpooled allocator (for now) to let
some benchmarks run to see if this is the source of an increase in GC
times.
Relates #22452
Netty plays a lot of games with recycling byte buffers in thread local
caches, and using a pooled byte buffer allocator to reduce pressure on
the garbage collector.
The recycler in particular appears to be fraught with peril. It appears
that there are circumstances where the recycler does not recycle quickly
enough and can exceed its capacity leading to heap exhaustion and out of
memory errors. If you spend a few minutes reading the history of the
recycler on the Netty GitHub issues, it appears it has been nothing but
a source of trouble, and the project itself has an open issue that
proposes disabling by default and possibly even removing the recycler.
The pooled byte buffer allocator has problems itself. It sizes the pool
based on the number of runtime processors and can indeed grab a very
large percentage of the heap (in some cases 50% or more). Additionally,
the Netty project continues to struggle with leaks here.
We are seeing users struggle with issues in 5.x that I think are largely
driven by some of the problems here with Netty.
This change proposes to disable the recycler, and to disable the pooled
byte buffer allocator. I think that disabling these features will return
some of the stablity that these features appear to be losing us.
I have done performance testing on my workstation with disabling these
and I do not see a difference in performance. I propose that we make
this change in master and let some nightly benchmarks run to confirm
that there is not a difference in performance. If we are comfortable
with the performance changes, I propose backporting this to all active
branches.
Relates #22452
This change is the first towards providing the ability to store
sensitive settings in elasticsearch. It adds the
`elasticsearch-keystore` tool, which allows managing a java keystore.
The keystore is loaded upon node startup in Elasticsearch, and used by
the Setting infrastructure when a setting is configured as secure.
There are a lot of caveats to this PR. The most important is it only
provides the tool and setting infrastructure for secure strings. It does
not yet provide for keystore passwords, keypairs, certificates, or even
convert any existing string settings to secure string settings. Those
will all come in follow up PRs. But this PR was already too big, so this
at least gets a basic version of the infrastructure in.
The two main things to look at. The first is the `SecureSetting` class,
which extends `Setting`, but removes the assumption for the raw value of the
setting to be a string. SecureSetting provides, for now, a single
helper, `stringSetting()` to create a SecureSetting which will return a
SecureString (which is like String, but is closeable, so that the
underlying character array can be cleared). The second is the
`KeyStoreWrapper` class, which wraps the java `KeyStore` to provide a
simpler api (we do not need the entire keystore api) and also extend
the serialized format to add metadata needed for loading the keystore
with no assumptions about keystore type (so that we can change this in
the future) as well as whether the keystore has a password (so that we
can know whether prompting is necessary when we add support for keystore
passwords).
A previous fix for the handling of paths on Windows related to paths
containing multiple spaces introduced a issue where if JAVA_HOME ends
with a backslash, then Elasticsearch will refuse to start. This is not a
critical bug as a workaround exists (remove the trailing backslash), but
should be fixed nevertheless. This commit addresses this situation while
not regressing the previous fix.
Relates #22132
This commit fixes the handling of spaces in Windows paths. The current
mechanism works fine in a path that contains a single space, but fails
on a path that contains multiple spaces. With this commit, that is no
longer the case.
Relates #21921
Elasticsearch can be run in a few different ways:
- from the command line on Linux and Windows
- as a service on Linux and Windows
on both 32-bit client and 64-bit server VMs. We strive for a great
out-of-the-box experience any of these combinations but today it is
lacking on 32-bit client JVMs and on the Windows service. There are two
deficiencies that arise:
- on any 32-bit client JVM we fail to start out of the box because we
force the server JVM in jvm.options
- when installing the Windows service, the thread stack size must be
specified in jvm.options
This commit attempts to address these deficiencies.
We should continue to force the server JVM because there are systems
where the server JVM is not active by default (e.g., the 32-bit JDK on
Windows). This does mean that if a user tries to run with a client JVM
they will see a failure message at startup but this is the best that we
can do if we want to continue to force the server JVM. Thus, this commit
at least documents this situation.
To improve the situation with installing the Windows service, this
commit adds a default setting for the thread stack size. This default is
chosen based on the default thread stack size across all 64-bit server
JVMs. This means that if a user tries to run with a 32-bit JVM they
could otherwise see significantly higher memory usage (this situation is
complicated, it's really only on Windows where the extra memory usage is
egregious, but cutting into the 32-bit address space on any system is
bad). So this commit makes it so that the out-of-the-box experience is
improved for the Windows service on 64-bit server JVMs and we document
the need to adjust this setting on 32-bit JVMs.
Again, we are focusing on the out-of-the-box experience here and this
means optimizing for the best experience on any 64-bit server JVM as
this covers the vast majority of the user base. The users that are on
32-bit JVMs will suffer a little bit but at least now any user on any
64-bit server JVM can start Elasticsearch out of the box.
Finally, we fix some references to the jvm.options documentation.
Relates #21920
During package install on systemd-based systems, we try to set
vm.max_map_count. On some systems (e.g., containers), users do not have
the ability to tune these parameters from within the container. This
commit provides an option for these users to skip setting such kernel
parameters.
Relates #21899
Our default pattern layout truncates log messages. This is to avoid
blowing disk space from excessively log messages, which can happen if a
message contains a mapping or an large query. Yet, we trunacte from the
beginning which is probably where the most germane information is. This
commit modifies the default pattern layout to trunacte from the end.
Relates #21609
On some systems these utilities are in /usr/lib/systemd/systemd-sysctl
and /usr/sbin/sysctl, and on others the /usr is dropped. This commit
accounts for that fact.
Our docs claim that we set vm.max_map_count automatically. This is not
quite the case. The story is that on SysV init we set vm.max_map_count
each time the service starts, which is good. On systemd, we create a
sysctl.d conf file that sets vm.map_max_count, but this is only
meaningful if the system is rebooted after package install. This commit
modifies the post-install script so that we run systemd-sysctl so that
the vm.max_map_count change occurs after package install without a
reboot.
Relates #21507
Given that the default is now 1, the comment in the config file was outdated. Also considering that the default value is production ready, we shouldn't list it among the values that need attention when going to production.
Relates to #19964
When installing the Windows service, certain settings like the minimum
heap, maximum heap and thread stack size setting must be set. While
there is an error message making mention of this fact, the error message
is not explicit exactly what setting needs to be set. This commit makes
these settings explicit.
Relates #21200
Currently we always pass -E to the the plugin cli with the conf dir, but
this causes a very confusing error message when not giving a specific
command to the plugin cli. This change makes path.conf pass just like
path.home. These are special settings, so passing via sysprops is the
right thing to do (it is all about how we pass between shell and java
cli).
closes#18689
When upgrading elasticsearch using the RPM package, the scripts directory is removed if it's empty but it won't be recreated by the upgraded package. But after that the service won't start because the scripts dir is missing.
This commit modifies the logger names within Elasticsearch to be the
fully-qualified class name as opposed removing the org.elasticsearch
prefix and dropping the class name. This change separates the root
logger from the Elasticsearch loggers (they were equated from the
removal of the org.elasticsearch prefix) and enables log levels to be
set at the class level (instead of the package level).
Relates #20457
Today we add a prefix when logging within Elasticsearch. This prefix
contains the node name, and index and shard-level components if
appropriate.
Due to some implementation details with Log4j 2 , this does not work for
integration tests; instead what we see is the node name for the last
node to startup. The implementation detail here is that Log4j 2 there is
only one logger for a name, message factory pair, and the key derived
from the message factory is the class name of the message factory. So,
when the last node starts up and starts setting prefixes on its message
factories, it will impact the loggers for the other nodes.
Additionally, the prefixes are lost when logging an exception. This is
due to another implementation detail in Log4j 2. Namely, since we log
exceptions using a parameterized message, Log4j 2 decides that that
means that we do not want to use the message factory that we have
provided (the prefix message factory) and so logs the exception without
the prefix.
This commit fixes both of these issues.
Relates #20429
This commit adds a -q/--quiet option to Elasticsearch so that it does not log anything in the console and closes stdout & stderr streams. This is useful for SystemD to avoid duplicate logs in both journalctl and /var/log/elasticsearch/elasticsearch.log while still allows the JVM to print error messages in stdout/stderr if needed.
closes#17220
The Elasticsearch startup scripts contain checks for the presence of
support for environment variables that were removed in the 5.x
series. These checks warn the user and fail the script if any of the
unsupported environment variables are present. This was provided as
migration step from 2.x to 5.x so that we were not just silently
ignoring environment variables that were previously set. This commit
removes these checks, as upgrades from 2.x to 6.x are not supported.
Relates #20404
Previous versions of Elasticsearch permitted unquoted JSON field names even though this is against the JSON spec. This leniency was disabled by default in the 5.x series of Elasticsearch but a backwards compatibility layer was added via a system property with the intention of removing this layer in 6.0.0. This commit removes this backwards compatibility layer.
Relates #20388
-D parameters used to be allowed when starting elasticsearch scripts.
However, this was removed in #18207, but the elasticsearch-plugin.bat script
was forgotten. This change removes the -D handling.
Jython shades `jansi` into it's classpath without changing it's package or
anything like that. This causes attempts to load native code on windows which
blows up tests. This change adds `log4j.skipJansi=true` system property to our
tests as well as to the JVM properties we set.
This commit configures the deprecation logs to be size-limited to 1 GB,
and compress these logs when they roll. The default configuration will
preserve up to four rolled logs.
Relates #20287
* master:
Increase visibility of deprecation logger
Skip transport client plugin installed on JDK 9
Explicitly disable Netty key set replacement
percolator: Fail indexing percolator queries containing either a has_child or has_parent query.
Make it possible for Ingest Processors to access AnalysisRegistry
Allow RestClient to send array-based headers
Silence rest util tests until the bogusness can be simplified
Remove unknown HttpContext-based test as it fails unpredictably on different JVMs
Tests: Improve rest suite names and generated test names for docs tests
Add support for a RestClient base path
The deprecation logger is an important way to make visible features of
Elasticsearch that are deprecated. Yet, the default logging makes the
log messages for the deprecation logger invisible. We want these log
messages to be visible, so the default logging for the deprecation
logger should enable these log messages. This commit changes the log
level of deprecation log message to warn, and configures the deprecation
logger so that these log messages are visible out of the box.
Relates #20254
Netty replaces the backing set for the selector implementation. The
value of doing this is questionable, and doing this requires permissions
that we are not going to grant. This commit explicitly disables this
optimization rather than relying on it failing due to lack of
permissions.
Relates #20249
the setting in elasticsearch.yml, so that when a user uncomments
out a setting by just removing the #, the setting actually
takes effect. Before, it was very easy to uncomment out a
setting by just removing the #, leaving a single whitespace
character before the setting name, which would cause the
setting to not get picked up by Elasticsearch.
Closes#20090
This commit fixes the handling of spaces in the path to the jvm.options
file on Windows. The issue is that the extraneous set of quotes were
included as part of the value of ES_JVM_OPTIONS thus confusing further
downstream commands.
Relates #19951
With the security permissions that we grant to Netty, Netty can not
access unsafe (because it relies on having the runtime permission
accessDeclaredMembers and the reflect permission
suppressAccessChecks). Instead, we should just explicitly tell Netty to
not use unsafe. This commit adds a flag to the default jvm.options to
tell Netty to not look for unsafe.
Relates #19786
This adds the `bin/elasticsearch-translate` bin file that will be used
for CLI tasks pertaining to Elasticsearch. Currently it implements only
a single sub-command, `truncate-translog`, that creates a truncated
translog for a given folder.
Here's what running the tool looks like:
```
λ bin/elasticsearch-translog truncate -d data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/
Checking existing translog files
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! WARNING: Elasticsearch MUST be stopped before running this tool !
! !
! WARNING: Documents inside of translog files will be lost !
! !
! WARNING: The following files will be DELETED! !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-10.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-18.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-21.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-12.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-25.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-29.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-2.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-5.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-41.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-6.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-37.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-24.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-11.ckp
Continue and DELETE files? [y/N] y
Reading translog UUID information from Lucene commit from shard at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/index]
Translog Generation: 3
Translog UUID : AxqC4rocTC6e0fwsljAh-Q
Removing existing translog files
Creating new empty checkpoint at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog.ckp]
Creating new empty translog at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-3.tlog]
Done.
```
It also includes a `-b` batch operation that can be used to skip the
confirmation diaglog.
Resolves#19123
Today in the packaging removal scripts, we disable the service in
post-uninstall. Yet, this happens after service files have been
erased. On some systems, this can cause the service disable to fail
leaving behind state causing the service to be enabled on subsequent
installs. This commit moves the service disabling to the pre-uninstall
script to prevent this issue.
Relates #19328
Unless explicitly disabled, the parallel new collector is enabled
automatically as soon as the CMS collector is enabled:
void Arguments::set_cms_and_parnew_gc_flags() {
assert(
!UseSerialGC && !UseParallelOldGC && !UseParallelGC,
"Error");
assert(UseConcMarkSweepGC, "CMS is expected to be on here");
// If we are using CMS, we prefer to UseParNewGC,
// unless explicitly forbidden.
if (FLAG_IS_DEFAULT(UseParNewGC)) {
FLAG_SET_ERGO(bool, UseParNewGC, true);
}
While it's fine to be explicit, the UseParNewGC flag is deprecatd in JDK
8 and produces warning messages in JDK 9:
Java HotSpot(TM) 64-Bit Server VM warning: Option UseParNewGC was
deprecated in version 9.0 and will likely be removed in a future
release.
Thus, we can and should just remove this flag from the default JVM
options.
Relates #18767
The setting bootstrap.mlockall is useful on both POSIX-like systems
(POSIX mlockall) and Windows (Win32 VirtualLock). But mlockall is really
a POSIX only thing so the name should not be tied POSIX. This commit
renames the setting to "bootstrap.memory_lock".
Relates #18669
The distributions had their own copies of these extra files, which was a
carry over from maven. This change removes the duplicate files and
copies them from the root of the project.
closes#18597
The default jvm.options file ships with the -server flag to force the
server VM on systems where the server VM is not the default. However,
the method of starting the JVM via the Windows service does not support
the command-line flags for selecting the VM because it starts from a
DLL that is specific to the server or client VM. Thus, we need to
filter these options from the jvm.options configuration file when
installing the Windows service.
Relates #18473
Today when parsing settings during bootstrap, we add a system property
for every Elasticsearch setting. Additionally, settings can be set via
system properties. This commit simplifies this situation.
- settings are no longer propogated to system properties
- system properties can not be used to set settings
- the "es." prefix on settings is no longer required (nor permitted)
- test logging has a dedicated system property (tests.logger.level)
Relates #18198
In the plugin script we set the setting default.path.conf to control the
path to the configuration file. But the default directory might not
exist in which case we can run into exceptions. This commit restores a
guard against this directory not existing.
This commit switches the command-line scripts to use bash instead of sh
so that we can take advantage of features that bash provides like
arrays.
Relates #18251
In 7d1fd17172 the parsing of command-line
properties in the plugin script was removed. That commit missed
additional parsing of the properties for es.default.path.conf. This
commit removes that parsing and also replaces the use of eval with exec.
Relates #18239
The plugin script parses command-line options looking for Java system
properties and extracts these arguments to pass to the java command when
starting the JVM. Since elasticsearch-plugin allows arbitrary user
arguments to the JVM via ES_JAVA_OPTS, this parsing is unnecessary. This
commit removes this unnecessary
Relates #18207
Today we softly warn about running with the client VM. However, we
should really refuse to start in production mode if running with the
client VM as the performance of the client VM is too devastating for a
server application. This commit adds an option to jvm.options to ensure
that we are starting with the server VM (on all 32-bit non-Windows
platforms on server-class machines (2+ CPUs, 2+ GB physical RAM) this is
the default and on all 64-bit platforms this is the only option) and
adds a bootstrap check for the client VM.
Relates #18155
Today we specify the client option for the JVM when executing plugin
commands. Yet, this option does nothing on a 64-bit capable JDK as such
JDKs always select the Hotspot server VM. And for 32-bit JDKs, running
plugin commands with the server VM is okay. Thus, we should just remove
this unnecessary flag and just let the default VM be selected.
Relates #18142
This changes our packaging to be explicit about the permissions of files
and directories in the tar.gz, rpm, and deb packages. This is to protect
against a user having an incorrectly set umask when installing.
Additionally, plugins that are installed now have their permissions set
by the plugin installation so that plugins that may have been packaged
with incorrect permissions are secured.
Resolves#17634
In Elasticsearch 5.0.0, by default unquoted field names in JSON will be
rejected. This can cause issues, however, for documents that were
already indexed with unquoted field names. To alleviate this, a system
property has been added that can be enabled so migration can occur.
This system property will be removed in Elasticsearch 6.0.0
Resolves#17674
This commit simplifies the default JVM options that ship with
Elasticsearch. In particular, expert settings that were previously
configurable via environment variables have been removed from the
default configuration file. Further, the heap size settings have been
moved to the top of the file with a clearer message that is in
concordance with their importance.
Closes#17714
This commit sets the bad_env_var to a default value of 0 so that in case
no bad environment variables are encountered the variable is still
defined and does not later cause a parse error in the execution of these
batch files.
Relates #17675
JAVA_OPTS is not a built-in mechanism for passing options to the JVM but
many people think that it is. We do not respect JAVA_OPTS, but this
commit adds a warning if it is set in case the end-user thinks that it
will affect Elasticsearch.
This commit renames the function that parses JVM options in
bin/elasticsearch from jvm_options to parse_jvm_options. The reason for
the rename is because a for-loop variable was shadowing the name of this
function and changing the function name further clarifies the purpose of
the function.
This commit fixes the placement of a comment in bin/elasticsearch. The
comment was made out of place by the addition of a function definition
but order is restored.
This commit adds a new configuration file jvm.options to centralize and
simplify management of JVM options. This separates the configuration of
the JVM from the packaging scripts (bin/elasticsearch*, bin/service.bat,
and init.d/elasticsearch) simplifying end-user operational management of
custom JVM options.
This commit quotes the variable that contains the path to the java
binary. Without these quotes, when the arguments to eval are evaluated
the existing quotes will be removed leading to unquoted use of the path
to the java binary. If this path contains spaces, evaluation will fail.
This commit ensures that the data, logs, and config directories have the
proper ownership after the packages are installed. Additionally, this
commit ensures that the configs in /etc/elasticsearch are preserved
after removal of the RPM package.
This commit fixes the pidfile setting on systems that used systemd. The
issue is that the pidfile can only be set via the command line arguments
-p or --pidfile, and is no longer settable via a setting.
Today, certain bootstrap properties are set and read via system
properties. This action-at-distance way of managing these properties is
rather confusing, and completely unnecessary. But another problem exists
with setting these as system properties. Namely, these system properties
are interpreted as Elasticsearch settings, not all of which are
registered. This leads to Elasticsearch failing to startup if any of
these special properties are set. Instead, these properties should be
kept as local as possible, and passed around as method parameters where
needed. This eliminates the action-at-distance way of handling these
properties, and eliminates the need to register these non-setting
properties. This commit does exactly that.
Additionally, today we use the "-D" command line flag to set the
properties, but this is confusing because "-D" is a special flag to the
JVM for setting system properties. This creates confusion because some
"-D" properties should be passed via arguments to the JVM (so via
ES_JAVA_OPTS), and some should be passed as arguments to
Elasticsearch. This commit changes the "-D" flag for Elasticsearch
settings to "-E".
Enables the touching of all memory pages used by the JVM heap spaces
during initialization of the HotSpot VM, which commits all memory pages
at initialization time. By default, pages are committed only as they are
needed.
The plugin cli currently is extremely lenient, allowing most errors to
simply be logged. This can lead to either corrupt installations (eg
partially installed plugins), or confused users.
This change rewrites the plugin cli to have almost no leniency.
Unfortunately it was not possible to remove all leniency, due in
particular to how config files are handled.
The following functionality was simplified:
* The format of the name argument to install a plugin is now an official
plugin name, maven coordinates, or a URL.
* Checksum files are required, and only checked, for official plugins
and maven plugins. Checksums are also only SHA1.
* Downloading no longer uses a separate thread, and no longer has a timeout.
* Installation, and removal, attempts to be atomic. This only truly works
when no config or bin files exist.
* config and bin directories are verified before copying is attempted.
* Permissions and user/group are no longer set on config and bin files.
We rely on the users umask.
* config and bin directories must only contain files, no subdirectories.
* The code is reorganized so each command is a separate class. These
classes already existed, but were embedded in the plugin cli class, as
an extra layer between the cli code and the code running for each command.
This commit modifies the default setting for standard output in the
systemd configuration to the journal instead of /dev/null. This is to
address a user pain point where Elasticsearch would fail to start but
the error message would be sent to standard output and therefore
/dev/null leading to difficult-to-debug situations.
This makes some minor improvements (does not fix all problems!)
It reorders unicast disco in elasticsearch.yml to be right after the network host,
for better locality.
It removes the warning (unreleased) about publish addresses, lets try to really discourage setting
that unless you need to (behind a proxy server). Most people should be fine with `network.host`
Finally it reorganizes the network docs page a bit:
We add a table of 4 "basic" settings at the very beginning:
* network.host
* discovery.zen.ping.unicast.hosts
* http.port
* transport.tcp.port
The first two being the most important, which addresses to bind and talk to, and the other two
being the port numbers.
The rest of the stuff I tried to simplify and reorder under "advanced" headers.
This is just a quick stab, I still think we need more effort into this thing, but we gotta start somewhere.
This change removes the leftover pom files. A couple files were left for
reference, namely in qa tests that have not yet been migrated (vagrant
and multinode). The deb and rpm assemblies also still exist for
reference when finishing their setup in gradle.
See #13930
This commit fixes an issue where when starting Elasticsearch in
daemonized mode, a failed startup would not cause a non-zero exit code
to be returned. This can prevent the SysV init system from detecting
startup failures.
Closes#14163
It is rarely used and was not consistently handled by different distributions anyway.
This commit also adds a test for specifying CONF_DIR when installing plugins and
starting elasticsearch.
relates to #12712 and #12954closes#5329closes#13715
Jason Tedor
Jordan Sissel
David Roberts
Christian Hofstaedtler
Colin Goodheart-Smithe
Russ Cam
Nik Everett
Lee Hinman
Ryan Ernst
Daniel Mitterdorfer
David Pilato
Yannick Welsch
Luca Cavanna
Tanguy Leroux
gfyoung
Simon Willnauer
Ali Beyad
Clinton Gormley
Stefan Scherer
Radovan Ondas
Danilo Vaz
Daniil Penkin
Lee Hinman
Joe Hillenbrand
Mpdreamz
Simon Willnauer
gmarz
Jim Ferenczi
David Roberts
Robert Muir
girirajsharma
jmferrer
Yannick Welsch
Britta Weber