When an ML job runs the memory required can be
broken down into:
1. Memory required to load the executable code
2. Instrumented model memory
3. Other memory used by the job's main process or
ancilliary processes that is not instrumented
Previously we added a simple fixed overhead to
account for 1 and 3. This was 100MB for anomaly
detection jobs (large because of the completely
uninstrumented categorization function and
normalize process), and 20MB for data frame
analytics jobs.
However, this was an oversimplification because
the executable code only needs to be loaded once
per machine. Also the 100MB overhead for anomaly
detection jobs was probably too high in most cases
because categorization and normalization don't use
_that_ much memory.
This PR therefore changes the calculation of memory
requirements as follows:
1. A per-node overhead of 30MB for _only_ the first
job of any type to be run on a given node - this
is to account for loading the executable code
2. The established model memory (if applicable) or
model memory limit of the job
3. A per-job overhead of 10MB for anomaly detection
jobs and 5MB for data frame analytics jobs, to
account for the uninstrumented memory usage
This change will enable more jobs to be run on the
same node. It will be particularly beneficial when
there are a large number of small jobs. It will
have less of an effect when there are a small number
of large jobs.
* Remove eclipse conditionals
We used to have some meta projects with a `-test` prefix because
historically eclipse could not distinguish between test and main
source-sets and could only use a single classpath.
This is no longer the case for the past few Eclipse versions.
This PR adds the necessary configuration to correctly categorize source
folders and libraries.
With this change eclipse can import projects, and the visibility rules
are correct e.x. auto compete doesn't offer classes from test code or
`testCompile` dependencies when editing classes in `main`.
Unfortunately the cyclic dependency detection in Eclipse doesn't seem to
take the difference between test and non test source sets into account,
but since we are checking this in Gradle anyhow, it's safe to set to
`warning` in the settings. Unfortunately there is no setting to ignore
it.
This might cause problems when building since Eclipse will probably not
know the right order to build things in so more wirk might be necesarry.
* Add API to execute SLM retention on-demand (#47405)
This is a backport of #47405
This commit adds the `/_slm/_execute_retention` API endpoint. This
endpoint kicks off SLM retention and then returns immediately.
This in particular allows us to run retention without scheduling it
(for entirely manual invocation) or perform a one-off cleanup.
This commit also includes HLRC for the new API, and fixes an issue
in SLMSnapshotBlockingIntegTests where retention invoked prior to the
test completing could resurrect an index the internal test cluster
cleanup had already deleted.
Resolves#46508
Relates to #43663
* Fix AllocationRoutedStepTests.testConditionMetOnlyOneCopyAllocated
These tests were using randomly generated includes/excludes/requires for
routing, however, it was possible to generate mutually exclusive
allocation settings (about 1 out of 50,000 times for my runs).
This splits the test into three different tests, and removes the
randomization (it doesn't add anything to the testing here) to fix the
issue.
Resolves#47142
While it seemed like the PUT data frame analytics action did not
have to be a master node action as the config is stored in an index
rather than the cluster state, there are other subtle nuances which
make it worthwhile to convert it. In particular, it helps maintain
order of execution for put actions which are anyhow user driven and
are expected to have low volume.
This commit converts `TransportPutDataFrameAnalyticsAction` from
a handled transport action to a master node action.
Note this means that the action might fail in a mixed cluster
but as the API is still experimental and not widely used there will
be few moments more suitable to make this change than now.
Bulk requests currently do not allow adding "create" actions with auto-generated IDs.
This commit allows using the optype CREATE for append-only indexing operations. This is
mainly the user facing aspect of it.
Due to #47003 many clusters will have built up a
large backlog of expired results. On upgrading to
a version where that bug is fixed users could find
that the first ML daily maintenance task deletes
a very large amount of documents.
This change introduces throttling to the
delete-by-query that the ML daily maintenance uses
to delete expired results to limit it to deleting an
average 200 documents per second. (There is no
throttling for state/forecast documents as these
are expected to be lower volume.)
Additionally a rough time limit of 8 hours is applied
to the whole delete expired data action. (This is only
rough as it won't stop part way through a single
operation - it only checks the timeout between
operations.)
Relates #47103
This commit restores the model state if available in data
frame analytics jobs.
In addition, this changes the start API so that a stopped job
can be restarted. As we now store the progress in the state index
when the task is stopped, we can use it to determine what state
the job was in when it got stopped.
Note that in order to be able to distinguish between a job
that runs for the first time and another that is restarting,
we ensure reindexing progress is reported to be at least 1
for a running task.
Due to a regression bug the metadata Active Directory realm
setting is ignored (it works correctly for the LDAP realm type).
This commit redresses it.
Closes#45848
* [ML][Inference] adding .ml-inference* index and storage (#47267)
* [ML][Inference] adding .ml-inference* index and storage
* Addressing PR comments
* Allowing null definition, adding validation tests for model config
* fixing line length
* adjusting for backport
As a result of #45689 snapshot finalization started to
take significantly longer than before. This may be a
little unfortunate since it increases the likelihood
of failing to finalize after having written out all
the segment blobs.
This change parallelizes all the metadata writes that
can safely run in parallel in the finalization step to
speed the finalization step up again. Also, this will
generally speed up the snapshot process overall in case
of large number of indices.
This is also a nice to have for #46250 since we add yet
another step (deleting of old index- blobs in the shards
to the finalization.
Currently the policy config is placed directly in the json object
of the toplevel `policies` array field. For example:
```
{
"policies": [
{
"match": {
"name" : "my-policy",
"indices" : ["users"],
"match_field" : "email",
"enrich_fields" : [
"first_name",
"last_name",
"city",
"zip",
"state"
]
}
}
]
}
```
This change adds a `config` field in each policy json object:
```
{
"policies": [
{
"config": {
"match": {
"name" : "my-policy",
"indices" : ["users"],
"match_field" : "email",
"enrich_fields" : [
"first_name",
"last_name",
"city",
"zip",
"state"
]
}
}
}
]
}
```
This allows us in the future to add other information about policies
in the get policy api response.
The UI will consume this API to build an overview of all policies.
The UI may in the future include additional information about a policy
and the plan is to include that in the get policy api, so that this
information can be gathered in a single api call.
An example of the information that is likely to be added is:
* Last policy execution time
* The status of a policy (executing, executed, unexecuted)
* Information about the last failure if exists
These settings were using get raw to fallback to whether or not SSL is
enabled. Yet, we have a formal mechanism for falling back to a
setting. This commit cuts over to that formal mechanism.
Backport of #45794 to 7.x. Convert most `awaitBusy` calls to
`assertBusy`, and use asserts where possible. Follows on from #28548 by
@liketic.
There were a small number of places where it didn't make sense to me to
call `assertBusy`, so I kept the existing calls but renamed the method to
`waitUntil`. This was partly to better reflect its usage, and partly so
that anyone trying to add a new call to awaitBusy wouldn't be able to find
it.
I also didn't change the usage in `TransportStopRollupAction` as the
comments state that the local awaitBusy method is a temporary
copy-and-paste.
Other changes:
* Rework `waitForDocs` to scale its timeout. Instead of calling
`assertBusy` in a loop, work out a reasonable overall timeout and await
just once.
* Some tests failed after switching to `assertBusy` and had to be fixed.
* Correct the expect templates in AbstractUpgradeTestCase. The ES
Security team confirmed that they don't use templates any more, so
remove this from the expected templates. Also rewrite how the setup
code checks for templates, in order to give more information.
* Remove an expected ML template from XPackRestTestConstants The ML team
advised that the ML tests shouldn't be waiting for any
`.ml-notifications*` templates, since such checks should happen in the
production code instead.
* Also rework the template checking code in `XPackRestTestHelper` to give
more helpful failure messages.
* Fix issue in `DataFrameSurvivesUpgradeIT` when upgrading from < 7.4
Drop the usage of `SimpleDateFormat` and use the `DateFormatter` instead
(cherry picked from commit 7cf509a7a11ecf6c40c44c18e8f03b8e81fcd1c2)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
This change also slightly modifies the stats response,
so that is can easier consumer by monitoring and other
users. (coordinators stats are now in a list instead of
a map and has an additional field for the node id)
Relates to #32789
In the current implementation, the validation of the role query
occurs at runtime when the query is being executed.
This commit adds validation for the role query when creating a role
but not for the template query as we do not have the runtime
information required for evaluating the template query (eg. authenticated user's
information). This is similar to the scripts that we
store but do not evaluate or parse if they are valid queries or not.
For validation, the query is evaluated (if not a template), parsed to build the
QueryBuilder and verify if the query type is allowed.
Closes#34252
* ILM: parse origination date from index name (#46755)
Introduce the `index.lifecycle.parse_origination_date` setting that
indicates if the origination date should be parsed from the index name.
If set to true an index which doesn't match the expected format (namely
`indexName-{dateFormat}-optional_digits` will fail before being created.
The origination date will be parsed when initialising a lifecycle for an
index and it will be set as the `index.lifecycle.origination_date` for
that index.
A user set value for `index.lifecycle.origination_date` will always
override a possible parsable date from the index name.
(cherry picked from commit c363d27f0210733dad0c307d54fa224a92ddb569)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
* Drop usage of Map.of to be java 8 compliant
* Wait for snapshot completion in SLM snapshot invocation
This changes the snapshots internally invoked by SLM to wait for
completion. This allows us to capture more snapshotting failure
scenarios.
For example, previously a snapshot would be created and then registered
as a "success", however, the snapshot may have been aborted, or it may
have had a subset of its shards fail. These cases are now handled by
inspecting the response to the `CreateSnapshotRequest` and ensuring that
there are no failures. If any failures are present, the history store
now stores the action as a failure instead of a success.
Relates to #38461 and #43663
Using arrays of objects with embedded IDs is preferred for new APIs over
using entity IDs as JSON keys. This commit changes the SLM stats API to
use the preferred format.
* [ML][Inference] Feature pre-processing objects and functions (#46777)
To support inference on pre-trained machine learning models, some basic feature encoding will be necessary. I am using a named object serialization approach so new encodings/pre-processing steps could be added in the future.
This PR lays down the ground work for 3 basic encodings:
* HotOne
* Target Mean
* Frequency
More feature encodings or pre-processings could be added in the future:
* Handling missing columns
* Standardization
* Label encoding
* etc....
* fixing compilation for namedxcontent tests
This change allows for the caller of the `saml/prepare` API to pass
a `relay_state` parameter that will then be part of the redirect
URL in the response as the `RelayState` query parameter.
The SAML IdP is required to reflect back the value of that relay
state when sending a SAML Response. The caller of the APIs can
then, when receiving the SAML Response, read and consume the value
as it see fit.
Previously, queries on the _index field were not able to specify index aliases.
This was a regression in functionality compared to the 'indices' query that was
deprecated and removed in 6.0.
Now queries on _index can specify an alias, which is resolved to the concrete
index names when we check whether an index matches. To match a remote shard
target, the pattern needs to be of the form 'cluster:index' to match the
fully-qualified index name. Index aliases can be specified in the following query
types: term, terms, prefix, and wildcard.
This commit changes the GET REST api so it will accept an optional comma
separated list of enrich policy ids. This change also modifies the
behavior of the GET API in that it will not error if it is passed a bad
enrich id anymore, but will instead just return an empty list.
This commit reuses the same state processor that is used for autodetect
to parse state output from data frame analytics jobs. We then index the
state document into the state index.
Backport of #46804
* [ML][Transforms] remove `force` flag from _start (#46414)
* [ML][Transforms] remove `force` flag from _start
* fixing expected error message
* adjusting bwc version
* Give kibana user reserved role privileges on .apm-* to create APM agent configuration index.
* fixed test to include checking all .apm-* permissions
* changed pattern from ".apm-*" to the more specific ".apm-agent-configuration"
* Write metadata during snapshot finalization after segment files to prevent outdated metadata in case of dynamic mapping updates as explained in #41581
* Keep the old behavior of writing the metadata beforehand in the case of mixed version clusters for BwC reasons
* Still overwrite the metadata in the end, so even a mixed version cluster is fixed by this change if a newer version master does the finalization
* Fixes#41581
* [ILM] Add date setting to calculate index age
Add the `index.lifecycle.origination_date` to allow users to configure a
custom date that'll be used to calculate the index age for the phase
transmissions (as opposed to the default index creation date).
This could be useful for users to create an index with an "older"
origination date when indexing old data.
Relates to #42449.
* [ILM] Don't override creation date on policy init
The initial approach we took was to override the lifecycle creation date
if the `index.lifecycle.origination_date` setting was set. This had the
disadvantage of the user not being able to update the `origination_date`
anymore once set.
This commit changes the way we makes use of the
`index.lifecycle.origination_date` setting by checking its value when
we calculate the index age (ie. at "read time") and, in case it's not
set, default to the index creation date.
* Make origination date setting index scope dynamic
* Document orignation date setting in ilm settings
(cherry picked from commit d5bd2bb77ee28c1978ab6679f941d7c02e389d32)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Since the `IndicesSegmentsRequest` scatters to all shards for the index,
it's possible that some of the shards may fail. This adds failure
handling and logging (since this is a best-effort step in the first
place) for this case.
This commit replaces the `SearchContext` with the `QueryShardContext` when building aggregator factories. Aggregator factories are part of the `SearchContext` so they shouldn't require a `SearchContext` to create them.
The main changes here are the signatures of `AggregationBuilder#build` that now takes a `QueryShardContext` and `AggregatorFactory#createInternal` that passes the `SearchContext` to build the `Aggregator`.
Relates #46523
rename data frame transform plugin to transform:
- rename plugin data-frame to transform
- change all package names from o.e.*.dataframe.* to o.e.*.transform.*
- necessary changes to fix loading/testing
* More Efficient Ordering of Shard Upload Execution (#42791)
* Change the upload order of of snapshots to work file by file in parallel on the snapshot pool instead of merely shard-by-shard
* Inspired by #39657
* Cleanup BlobStoreRepository Abort and Failure Handling (#46208)
The enrich api returns enrich coordinator stats and
information about currently executing enrich policies.
The coordinator stats include per ingest node:
* The current number of search requests in the queue.
* The total number of outstanding remote requests that
have been executed since node startup. Each remote
request is likely to include multiple search requests.
This depends on how much search requests are in the
queue at the time when the remote request is performed.
* The number of current outstanding remote requests.
* The total number of search requests that `enrich`
processors have executed since node startup.
The current execution policies stats include:
* The name of policy that is executing
* A full blow task info object that is executing the policy.
Relates to #32789
This change adds an IndexSearcher and the node's BigArrays in the QueryShardContext.
It's a spin off of #46527 as this change is required to allow aggregation builder to solely use the
query shard context.
Relates #46523
* Add retention to Snapshot Lifecycle Management (#46407)
This commit adds retention to the existing Snapshot Lifecycle Management feature (#38461) as described in #43663. This allows a user to configure SLM to automatically delete older snapshots based on a number of criteria.
An example policy would look like:
```
PUT /_slm/policy/snapshot-every-day
{
"schedule": "0 30 2 * * ?",
"name": "<production-snap-{now/d}>",
"repository": "my-s3-repository",
"config": {
"indices": ["foo-*", "important"]
},
// Newly configured retention options
"retention": {
// Snapshots should be deleted after 14 days
"expire_after": "14d",
// Keep a maximum of thirty snapshots
"max_count": 30,
// Keep a minimum of the four most recent snapshots
"min_count": 4
}
}
```
SLM Retention is run on a scheduled configurable with the `slm.retention_schedule` setting, which supports cron expressions. Deletions are run for a configurable time bounded by the `slm.retention_duration` setting, which defaults to 1 hour.
Included in this work is a new SLM stats API endpoint available through
``` json
GET /_slm/stats
```
That returns statistics about snapshot taken and deleted, as well as successful retention runs, failures, and the time spent deleting snapshots. #45362 has more information as well as an example of the output. These stats are also included when retrieving SLM policies via the API.
* Add base framework for snapshot retention (#43605)
* Add base framework for snapshot retention
This adds a basic `SnapshotRetentionService` and `SnapshotRetentionTask`
to start as the basis for SLM's retention implementation.
Relates to #38461
* Remove extraneous 'public'
* Use a local var instead of reading class var repeatedly
* Add SnapshotRetentionConfiguration for retention configuration (#43777)
* Add SnapshotRetentionConfiguration for retention configuration
This commit adds the `SnapshotRetentionConfiguration` class and its HLRC
counterpart to encapsulate the configuration for SLM retention.
Currently only a single parameter is supported as an example (we still
need to discuss the different options we want to support and their
names) to keep the size of the PR down. It also does not yet include version serialization checks
since the original SLM branch has not yet been merged.
Relates to #43663
* Fix REST tests
* Fix more documentation
* Use Objects.equals to avoid NPE
* Put `randomSnapshotLifecyclePolicy` in only one place
* Occasionally return retention with no configuration
* Implement SnapshotRetentionTask's snapshot filtering and delet… (#44764)
* Implement SnapshotRetentionTask's snapshot filtering and deletion
This commit implements the snapshot filtering and deletion for
`SnapshotRetentionTask`. Currently only the expire-after age is used for
determining whether a snapshot is eligible for deletion.
Relates to #43663
* Fix deletes running on the wrong thread
* Handle missing or null policy in snap metadata differently
* Convert Tuple<String, List<SnapshotInfo>> to Map<String, List<SnapshotInfo>>
* Use the `OriginSettingClient` to work with security, enhance logging
* Prevent NPE in test by mocking Client
* Allow empty/missing SLM retention configuration (#45018)
Semi-related to #44465, this allows the `"retention"` configuration map
to be missing.
Relates to #43663
* Add min_count and max_count as SLM retention predicates (#44926)
This adds the configuration options for `min_count` and `max_count` as
well as the logic for determining whether a snapshot meets this criteria
to SLM's retention feature.
These options are optional and one, two, or all three can be specified
in an SLM policy.
Relates to #43663
* Time-bound deletion of snapshots in retention delete function (#45065)
* Time-bound deletion of snapshots in retention delete function
With a cluster that has a large number of snapshots, it's possible that
snapshot deletion can take a very long time (especially since deletes
currently have to happen in a serial fashion). To prevent snapshot
deletion from taking forever in a cluster and blocking other operations,
this commit adds a setting to allow configuring a maximum time to spend
deletion snapshots during retention. This dynamic setting defaults to 1
hour and is best-effort, meaning that it doesn't hard stop a deletion
at an hour mark, but ensures that once the time has passed, all
subsequent deletions are deferred until the next retention cycle.
Relates to #43663
* Wow snapshots suuuure can take a long time.
* Use a LongSupplier instead of actually sleeping
* Remove TestLogging annotation
* Remove rate limiting
* Add SLM metrics gathering and endpoint (#45362)
* Add SLM metrics gathering and endpoint
This commit adds the infrastructure to gather metrics about the different SLM actions that a cluster
takes. These actions are stored in `SnapshotLifecycleStats` and perpetuated in cluster state. The
stats stored include the number of snapshots taken, failed, deleted, the number of retention runs,
as well as per-policy counts for snapshots taken, failed, and deleted. It also includes the amount
of time spent deleting snapshots from SLM retention.
This commit also adds an endpoint for retrieving all stats (further commits will expose this in the
SLM get-policy API) that looks like:
```
GET /_slm/stats
{
"retention_runs" : 13,
"retention_failed" : 0,
"retention_timed_out" : 0,
"retention_deletion_time" : "1.4s",
"retention_deletion_time_millis" : 1404,
"policy_metrics" : {
"daily-snapshots2" : {
"snapshots_taken" : 7,
"snapshots_failed" : 0,
"snapshots_deleted" : 6,
"snapshot_deletion_failures" : 0
},
"daily-snapshots" : {
"snapshots_taken" : 12,
"snapshots_failed" : 0,
"snapshots_deleted" : 12,
"snapshot_deletion_failures" : 6
}
},
"total_snapshots_taken" : 19,
"total_snapshots_failed" : 0,
"total_snapshots_deleted" : 18,
"total_snapshot_deletion_failures" : 6
}
```
This does not yet include HLRC for this, as this commit is quite large on its own. That will be
added in a subsequent commit.
Relates to #43663
* Version qualify serialization
* Initialize counters outside constructor
* Use computeIfAbsent instead of being too verbose
* Move part of XContent generation into subclass
* Fix REST action for master merge
* Unused import
* Record history of SLM retention actions (#45513)
This commit records the deletion of snapshots by the retention component
of SLM into the SLM history index for the purposes of reviewing operations
taken by SLM and alerting.
* Retry SLM retention after currently running snapshot completes (#45802)
* Retry SLM retention after currently running snapshot completes
This commit adds a ClusterStateObserver to wait until the currently
running snapshot is complete before proceeding with snapshot deletion.
SLM retention waits for the maximum allowed deletion time for the
snapshot to complete, however, the waiting time is not factored into
the limit on actual deletions.
Relates to #43663
* Increase timeout waiting for snapshot completion
* Apply patch
From 2374316f0d.patch
* Rename test variables
* [TEST] Be less strict for stats checking
* Skip SLM retention if ILM is STOPPING or STOPPED (#45869)
This adds a check to ensure we take no action during SLM retention if
ILM is currently stopped or in the process of stopping.
Relates to #43663
* Check all actions preventing snapshot delete during retention (#45992)
* Check all actions preventing snapshot delete during retention run
Previously we only checked to see if a snapshot was currently running,
but it turns out that more things can block snapshot deletion. This
changes the check to be a check for:
- a snapshot currently running
- a deletion already in progress
- a repo cleanup in progress
- a restore currently running
This was found by CI where a third party delete in a test caused SLM
retention deletion to throw an exception.
Relates to #43663
* Add unit test for okayToDeleteSnapshots
* Fix bug where SLM retention task would be scheduled on every node
* Enhance test logging
* Ignore if snapshot is already deleted
* Missing import
* Fix SnapshotRetentionServiceTests
* Expose SLM policy stats in get SLM policy API (#45989)
This also adds support for the SLM stats endpoint to the high level rest client.
Retrieving a policy now looks like:
```json
{
"daily-snapshots" : {
"version": 1,
"modified_date": "2019-04-23T01:30:00.000Z",
"modified_date_millis": 1556048137314,
"policy" : {
"schedule": "0 30 1 * * ?",
"name": "<daily-snap-{now/d}>",
"repository": "my_repository",
"config": {
"indices": ["data-*", "important"],
"ignore_unavailable": false,
"include_global_state": false
},
"retention": {}
},
"stats": {
"snapshots_taken": 0,
"snapshots_failed": 0,
"snapshots_deleted": 0,
"snapshot_deletion_failures": 0
},
"next_execution": "2019-04-24T01:30:00.000Z",
"next_execution_millis": 1556048160000
}
}
```
Relates to #43663
* Rewrite SnapshotLifecycleIT as as ESIntegTestCase (#46356)
* Rewrite SnapshotLifecycleIT as as ESIntegTestCase
This commit splits `SnapshotLifecycleIT` into two different tests.
`SnapshotLifecycleRestIT` which includes the tests that do not require
slow repositories, and `SLMSnapshotBlockingIntegTests` which is now an
integration test using `MockRepository` to simulate a snapshot being in
progress.
Relates to #43663Resolves#46205
* Add error logging when exceptions are thrown
* Update serialization versions
* Fix type inference
* Use non-Cancellable HLRC return value
* Fix Client mocking in test
* Fix SLMSnapshotBlockingIntegTests for 7.x branch
* Update SnapshotRetentionTask for non-multi-repo snapshot retrieval
* Add serialization guards for SnapshotLifecyclePolicy
The previous transport action was a read action, which under the right
set of circumstances can execute on a coordinating node. This commit
ensures that cannot happen.
Besides a rename, this changes allows to processor to attach multiple
enrich docs to the document being ingested.
Also in order to control the maximum number of enrich docs to be
included in the document being ingested, the `max_matches` setting
is added to the enrich processor.
Relates #32789
As per #45852 comment we no longer need to log stack-traces in
SecurityTransportExceptionHandler and SecurityHttpExceptionHandler even
if trace logging is enabled.
(cherry picked from commit c99224a32d26db985053b7b36e2049036e438f97)
* [ML][Transforms] fixing stop on changes check bug
* Adding new method finishAndCheckState to cover race conditions in early terminations
* changing stopping conditions in `onStart`
* allow indexer to finish when exiting early
Fixes a problem where operations_behind would be one less than
expected per shard in a new index matched by the data frame
transform source pattern.
For example, if a data frame transform had a source of foo*
and a new index foo-new was created with 2 shards and 7 documents
indexed in it then operations_behind would be 5 prior to this
change.
The problem was that an empty index has a global checkpoint
number of -1 and the sequence number of the first document that
is indexed into an index is 0, not 1. This doesn't matter for
indices included in both the last and next checkpoints, as the
off-by-one errors cancelled, but for a new index it affected
the observed result.
Though we allow CCS within datafeeds, users could prevent nodes from accessing remote clusters. This can cause mysterious errors and difficult to troubleshoot.
This commit adds a check to verify that `cluster.remote.connect` is enabled on the current node when a datafeed is configured with a remote index pattern.
* [ML] Regression dependent variable must be numeric
This adds a validation that the dependent variable of a regression
analysis must be numeric.
* Address review comments and fix some problems
In addition to addressing the review comments, this
commit fixes a few issues I found during testing.
In particular:
- if there were mappings for required fields but they were
not included we were not reporting the error
- if explicitly included fields had unsupported types we were
not reporting the error
Unfortunately, I couldn't get those fixed without refactoring
the code in `ExtractedFieldsDetector`.
This commit adds the `rollover_alias` setting required for ILM to work
correctly to the SLM history index template and adds assertions to the
SLM integration tests to ensure that it works correctly.
Prior to this commit the foreach action execution had a hard coded
limit to 100 iterations. This commit allows the max number of
iterations to be a configuration ('max_iterations') on the foreach
action. The default remains 100.
Adds a parameter `training_percent` to regression. The default
value is `100`. When the parameter is set to a value less than `100`,
from the rows that can be used for training (ie. those that have a
value for the dependent variable) we randomly choose whether to actually
use for training. This enables splitting the data into a training set and
the rest, usually called testing, validation or holdout set, which allows
for validating the model on data that have not been used for training.
Technically, the analytics process considers as training the data that
have a value for the dependent variable. Thus, when we decide a training
row is not going to be used for training, we simply clear the row's
dependent variable.
The existing privilege model for API keys with privileges like
`manage_api_key`, `manage_security` etc. are too permissive and
we would want finer-grained control over the cluster privileges
for API keys. Previously APIs created would also need these
privileges to get its own information.
This commit adds support for `manage_own_api_key` cluster privilege
which only allows api key cluster actions on API keys owned by the
currently authenticated user. Also adds support for retrieval of
the API key self-information when authenticating via API key
without the need for the additional API key privileges.
To support this privilege, we are introducing additional
authentication context along with the request context such that
it can be used to authorize cluster actions based on the current
user authentication.
The API key get and invalidate APIs introduce an `owner` flag
that can be set to true if the API key request (Get or Invalidate)
is for the API keys owned by the currently authenticated user only.
In that case, `realm` and `username` cannot be set as they are
assumed to be the currently authenticated ones.
The changes cover HLRC changes, documentation for the API changes.
Closes#40031
This commit introduces PKI realm delegation. This feature
supports the PKI authentication feature in Kibana.
In essence, this creates a new API endpoint which Kibana must
call to authenticate clients that use certificates in their TLS
connection to Kibana. The API call passes to Elasticsearch the client's
certificate chain. The response contains an access token to be further
used to authenticate as the client. The client's certificates are validated
by the PKI realms that have been explicitly configured to permit
certificates from the proxy (Kibana). The user calling the delegation
API must have the delegate_pki privilege.
Closes#34396
This adds a pipeline aggregation that calculates the cumulative
cardinality of a field. It does this by iteratively merging in the
HLL sketch from consecutive buckets and emitting the cardinality up
to that point.
This is useful for things like finding the total "new" users that have
visited a website (as opposed to "repeat" visitors).
This is a Basic+ aggregation and adds a new Data Science plugin
to house it and future advanced analytics/data science aggregations.
Today if non-TLS record is received on TLS port generic exception will
be logged with the stack-trace.
SSLExceptionHelper.isNotSslRecordException method does not work because
it's assuming that NonSslRecordException would be top-level.
This commit addresses the issue and the log would be more concise.
(cherry picked from commit 6b83527bf0c23d4d5b97fab7f290c43432945d4f)
This commit allows the Transport Actions for the SSO realms to
indicate the realm that should be used to authenticate the
constructed AuthenticationToken. This is useful in the case that
many authentication realms of the same type have been configured
and where the caller of the API(Kibana or a custom web app) already
know which realm should be used so there is no need to iterate all
the realms of the same type.
The realm parameter is added in the relevant REST APIs as optional
so as not to introduce any breaking change.
Previously, the stats API reports a progress percentage
for DF analytics tasks that are running and are in the
`reindexing` or `analyzing` state.
This means that when the task is `stopped` there is no progress
reported. Thus, one cannot distinguish between a task that never
run to one that completed.
In addition, there are blind spots in the progress reporting.
In particular, we do not account for when data is loaded into the
process. We also do not account for when results are written.
This commit addresses the above issues. It changes progress
to being a list of objects, each one describing the phase
and its progress as a percentage. We currently have 4 phases:
reindexing, loading_data, analyzing, writing_results.
When the task stops, progress is persisted as a document in the
state index. The stats API now reports progress from in-memory
if the task is running, or returns the persisted document
(if there is one).
A policy type controls how the enrich index is created and
the query executed against the match field. Currently there
is a single policy type (`exact_match`). In the near future
more policy types will be added and different policy may have
different configuration options.
For this reason type should be a json object instead of a string field:
```
{
"exact_match": {
...
}
}
```
instead of:
```
{
"type": "exact_match",
...
}
```
This will make streaming parsing of enrich policies easier as in the
new format, the parsing code can know ahead what configuration fields
to expect. In the latter format that is not possible if the type field
appears not as the first field.
Relates to #32789
The security indices were being created without specifying the
refresh interval, which means it would inherit a value from any
templates that exists.
However, certain security functionality depends on being able to
wait_for refresh, and causes errors (e.g. in Kibana) if that time
exceeds 30s.
This commit changes the security indices configuration to always be
created with a 1s refresh interval. This prevents any templates from
inadvertantly interfering with the proper functioning of security.
It is possible for an administrator to explicitly change the refresh
interval after the indices have been created.
Backport of: #45434
This change adds a new SSL context
xpack.notification.email.ssl.*
that supports the standard SSL configuration settings (truststore,
verification_mode, etc). This SSL context is used when configuring
outbound SMTP properties for watcher email notifications.
Backport of: #45272
* [ML] Adding data frame analytics stats to _usage API (#45820)
* [ML] Adding data frame analytics stats to _usage API
* making the size of analytics stats 10k
* adjusting backport
Adds index versioning for the internal data frame transform index. Allows for new indices to be created and referenced, `GET` requests now query over the index pattern and takes the latest doc (based on INDEX name).
Following our own guidelines, SLM should use rollover instead of purely
time-based indices to keep shard counts low. This commit implements lazy
index creation for SLM's history indices, indexing via an alias, and
rollover in the built-in ILM policy.
Regression analysis support missing fields. Even more, it is expected
that the dependent variable has missing fields to the part of the
data frame that is not for training.
This commit allows to declare that an analysis supports missing values.
For such analysis, rows with missing values are not skipped. Instead,
they are written as normal with empty strings used for the missing values.
This also contains a fix to the integration test.
Closes#45425
* [ML] better handle empty results when evaluating regression
* adding new failure test to ml_security black list
* fixing equality check for regression results
The get and list APIs are a single API in this commit. Whether
requesting one named policy or all policies, a list of policies is
returened. The list API code has all been removed and the GET api is
what remains, which contains much of the list response code.
* [ML][Data frame] fixing failure state transitions and race condition (#45627)
There is a small window for a race condition while we are flagging a task as failed.
Here are the steps where the race condition occurs:
1. A failure occurs
2. Before `AsyncTwoPhaseIndexer` calls the `onFailure` handler it does the following:
a. `finishAndSetState()` which sets the IndexerState to STARTED
b. `doSaveState(...)` which attempts to save the current state of the indexer
3. Another trigger is fired BEFORE `onFailure` can fire, but AFTER `finishAndSetState()` occurs.
The trick here is that we will eventually set the indexer to failed, but possibly not before another trigger had the opportunity to fire. This could obviously cause some weird state interactions. To combat this, I have put in some predicates to verify the state before taking actions. This is so if state is indeed marked failed, the "second trigger" stops ASAP.
Additionally, I move the task state checks INTO the `start` and `stop` methods, which will now require a `force` parameter. `start`, `stop`, `trigger` and `markAsFailed` are all `synchronized`. This should gives us some guarantees that one will not switch states out from underneath another.
I also flag the task as `failed` BEFORE we successfully write it to cluster state, this is to allow us to make the task fail more quickly. But, this does add the behavior where the task is "failed" but the cluster state does not indicate as much. Adding the checks in `start` and `stop` will handle this "real state vs cluster state" race condition. This has always been a problem for `_stop` as it is not a master node action and doesn’t always have the latest cluster state.
closes#45609
Relates to #45562
* [ML][Data Frame] moves failure state transition for MT safety (#45676)
* [ML][Data Frame] moves failure state transition for MT safety
* removing unused imports
* Introduce Spatial Plugin (#44389)
Introduce a skeleton Spatial plugin that holds new licensed features coming to
Geo/Spatial land!
* [GEO] Refactor DeprecatedParameters in AbstractGeometryFieldMapper (#44923)
Refactor DeprecatedParameters specific to legacy geo_shape out of
AbstractGeometryFieldMapper.TypeParser#parse.
* [SPATIAL] New ShapeFieldMapper for indexing cartesian geometries (#44980)
Add a new ShapeFieldMapper to the xpack spatial module for
indexing arbitrary cartesian geometries using a new field type called shape.
The indexing approach leverages lucene's new XYShape field type which is
backed by BKD in the same manner as LatLonShape but without the WGS84
latitude longitude restrictions. The new field mapper builds on and
extends the refactoring effort in AbstractGeometryFieldMapper and accepts
shapes in either GeoJSON or WKT format (both of which support non geospatial
geometries).
Tests are provided in the ShapeFieldMapperTest class in the same manner
as GeoShapeFieldMapperTests and LegacyGeoShapeFieldMapperTests.
Documentation for how to use the new field type and what parameters are
accepted is included. The QueryBuilder for searching indexed shapes is
provided in a separate commit.
* [SPATIAL] New ShapeQueryBuilder for querying indexed cartesian geometry (#45108)
Add a new ShapeQueryBuilder to the xpack spatial module for
querying arbitrary Cartesian geometries indexed using the new shape field
type.
The query builder extends AbstractGeometryQueryBuilder and leverages the
ShapeQueryProcessor added in the previous field mapper commit.
Tests are provided in ShapeQueryTests in the same manner as
GeoShapeQueryTests and docs are updated to explain how the query works.
The current implementations make it difficult for
adding new privileges (example: a cluster privilege which is
more than cluster action-based and not exposed to the security
administrator). On the high level, we would like our cluster privilege
either:
- a named cluster privilege
This corresponds to `cluster` field from the role descriptor
- or a configurable cluster privilege
This corresponds to the `global` field from the role-descriptor and
allows a security administrator to configure them.
Some of the responsibilities like the merging of action based cluster privileges
are now pushed at cluster permission level. How to implement the predicate
(using Automaton) is being now enforced by cluster permission.
`ClusterPermission` helps in enforcing the cluster level access either by
performing checks against cluster action and optionally against a request.
It is a collection of one or more permission checks where if any of the checks
allow access then the permission allows access to a cluster action.
Implementations of cluster privilege must be able to provide information
regarding the predicates to the cluster permission so that can be enforced.
This is enforced by making implementations of cluster privilege aware of
cluster permission builder and provide a way to specify how the permission is
to be built for a given privilege.
This commit renames `ConditionalClusterPrivilege` to `ConfigurableClusterPrivilege`.
`ConfigurableClusterPrivilege` is a renderable cluster privilege exposed
as a `global` field in role descriptor.
Other than this there is a requirement where we would want to know if a cluster
permission is implied by another cluster-permission (`has-privileges`).
This is helpful in addressing queries related to privileges for a user.
This is not just simply checking of cluster permissions since we do not
have access to runtime information (like request object).
This refactoring does not try to address those scenarios.
Relates #44048
This commit adds a first draft of a regression analysis
to data frame analytics. There is high probability that
the exact syntax might change.
This commit adds the new analysis type and its parameters as
well as appropriate validation. It also modifies the extractor
and the fields detector to be able to handle categorical fields
as regression analysis supports them.
This commit replaces task_state and indexer_state in the
data frame _stats output with a single top level state
that combines the two. It is defined as:
- failed if what's currently reported as task_state is failed
- stopped if there is no persistent task
- Otherwise what's currently reported as indexer_state
Backport of #45276
* [ML][Data Frame] Add update transform api endpoint (#45154)
This adds the ability to `_update` stored data frame transforms. All mutable fields are applied when the next checkpoint starts. The exception being `description`.
This PR contains all that is necessary for this addition:
* HLRC
* Docs
* Server side
We currently use the unboundid ldap SDK, which is triply licensed under
GPL-2.0, LGPL-2.1, and the "UnboundID LDAP SDK Free Use License". We currently
identify the license as the latter, but LGPL-2.1 is the one we should be using
per our policy.
The PutJob API accidentally used an "expert" API of CreateIndexRequest.
That API is semi-lenient to syntax; a type could be omitted and the
request would work as expected. But if a type was omitted it would
not merge with templates correctly, leading to index creation that
only has the template and not the requested mappings in the request.
This commit refactors the PutJob API to:
- Include the type name
- Use a less "expert" API in an attempt to future proof against errors
- Uses an XContentBuilder instead of string replacing, removes json template
Reloading of synonym_graph filter doesn't work currently because the search time
AnalysisMode doesn't get propagated to the TokenFilterFactory emitted by the
graph filters getChainAwareTokenFilterFactory() method. This change fixes that.
Closes#45127
This change improves the exception messages that are thrown when the
system cannot read TLS resources such as keystores, truststores,
certificates, keys or certificate-chains (CAs).
This change specifically handles:
- Files that do not exist
- Files that cannot be read due to file-system permissions
- Files that cannot be read due to the ES security-manager
Backport of: #44787
There are no realms that can be configured exclusively with secure
settings. Every realm that supports secure settings also requires one
or more non-secure settings.
However, sometimes a node will be configured with entries in the
keystore for which there is nothing in elasticsearch.yml - this may be
because the realm we removed from the yml, but not deleted from the
keystore, or it could be because there was a typo in the realm name
which has accidentially orphaned the keystore entry.
In these cases the realm building would fail, but the error would not
always be clear or point to the root cause (orphaned keystore
entries). RealmSettings would act as though the realm existed, but
then fail because an incorrect combination of settings was provided.
This change causes realm building to fail early, with an explicit
message about incorrect keystore entries.
Backport of: #44471
* Rename indexlifecycle to ilm and snapshotlifecycle to slm (#44917)
As a followup to #44725 and #44608, which renamed the packages within
the x-pack project, this renames the packages within the core x-pack
project. It also renames 'snapshotlifecycle' within the HLRC to slm.
* Fix one more import
In order to make it easier to interpret the output of the ILM Explain
API, this commit adds two request parameters to that API:
- `only_managed`, which causes the response to only contain indices
which have `index.lifecycle.name` set
- `only_errors`, which causes the response to contain only indices in an
ILM error state
"Error state" is defined as either being in the `ERROR` step or having
`index.lifecycle.name` set to a policy that does not exist.
This is a followup to #44350. The indexer stats used to
be persisted standalone, but now are only persisted as
part of a state-and-stats document. During the review
of #44350 it was decided that we'll stick with this
design, so there will never be a need for an indexer
stats object to store its transform ID as it is stored
on the enclosing document. This PR removes the indexer
stats document ID.
Backport of #44768
* Only emit deprecation warning if there was actual change of a datafeed's job_id.
* Add @Deprecated annotation to DatafeedUpdate.Builder#setJobId method
This change adjusts the data frame transforms stats
endpoint to return a structure that is easier to
understand.
This is a breaking change for clients of the data frame
transforms stats endpoint, but the feature is in beta so
stability is not guaranteed.
Backport of #44350
This commit renames the SLM package from snapshotlifecycle to slm. We
have all come to know index lifecycle management as ILM, the APIs and
settings use ilm, and it would be nice of the package did too. For SLM,
let's use slm for all of these including the package name from the
beginning.
This PR adds a background maintenance task that is scheduled on the master node only.
The deletion of an index is based on if it is not linked to a policy or if the enrich alias is not
currently pointing at it. Synchronization has been added to make sure that no policy
executions are running at the time of cleanup, and if any executions do occur, the marking
process delays cleanup until next run.
This adds a new dynamic cluster setting `xpack.data_frame.num_transform_failure_retries`.
This setting indicates how many times non-critical failures should be retried before a data frame transform is marked as failed and should stop executing. At the time of this commit; Min: 0, Max: 100, Default: 10
NamedAnalyzer should return the same AnalysisMode than any custom analyzer it
wraps, otherwise AnalysisMode.ALL. This used to be only CustomAnalyzer in the
past, but with the introduction of the ReloadableCustomAnalyzer this needs to be
added as an option where the analysis mode gets propagated.
Closes#44625
This commit converts several utility classes that implement Streamable
to have StreamInput constructors. It also adds a default version of
readFrom to Streamable so that overriding to throw UOE is not necessary.
relates #34389
This commit converts several more classes from streamable to writeable
in server, mostly within the o.e.index and o.e.persistent packages.
relates #34389
* Allow empty configuration for SLM policies
When putting or updating a snapshot lifecycle policy it was not possible
to elide the `config` map. This commit makes the configuration optional,
the same way that it is when taking a snapshot.
Relates to #38461
* Add Objects.requireNonNull for required parts of the policy
* Expose index age in ILM explain output
This adds the index's age to the ILM explain output, for example:
```
{
"indices" : {
"ilm-000001" : {
"index" : "ilm-000001",
"managed" : true,
"policy" : "full-lifecycle",
"lifecycle_date" : "2019-07-16T19:48:22.294Z",
"lifecycle_date_millis" : 1563306502294,
"age" : "1.34m",
"phase" : "hot",
"phase_time" : "2019-07-16T19:48:22.487Z",
... etc ...
}
}
}
```
This age can be used to tell when ILM will transition the index to the
next phase, based on that phase's `min_age`.
Resolves#38988
* Expose age in getters and in HLRC
Removes the warning suppression -Xlint:-deprecation,-rawtypes,-serial,-try,-unchecked.
Many warnings were unchecked warnings in the test code often because of the use of mocks.
These are suppressed with @SuppressWarning
many classes still use the Streamable constructors of HandledTransportAction,
this commit moves more of those classes to the new Writeable constructors.
relates #34389.
this commit removes usage of the deprecated
constructor with a single argument and no Writeable.Reader.
The purpose of this is to reduce the boilerplate necessary for
properly implementing a new action, as well as reducing the
chances of using the incorrect super constructor while classes
are being migrated to Writeable
relates #34389.
This commit converts all remaining ActionType response classes to
writeable in xpack core. It also converts a few from server which were
used by xpack core.
relates #34389
This commit adds constructors to AcknolwedgedRequest subclasses to
implement Writeable.Reader, and ensures all future subclasses implement
the same.
relates #34389
This commit converts the request and response classes for broadcast
actions to implement ctors for Writeable.Reader and forces all future
implementations to implement the same.
relates #34389
* Migrate ML Actions to use writeable ActionType (#44302)
This commit converts all the StreamableResponseActionType
actions in the ML core module to be ActionType and leverage
the Writeable infrastructure.
This improves the error message when encrypting of sensitive watcher
data is configured, but no system file was specified in the keystore.
This error message is displayed on startup.
This also closes the input stream of the secure file properly.
Closes#43619
* Add Snapshot Lifecycle Management (#43934)
* Add SnapshotLifecycleService and related CRUD APIs
This commit adds `SnapshotLifecycleService` as a new service under the ilm
plugin. This service handles snapshot lifecycle policies by scheduling based on
the policies defined schedule.
This also includes the get, put, and delete APIs for these policies
Relates to #38461
* Make scheduledJobIds return an immutable set
* Use Object.equals for SnapshotLifecyclePolicy
* Remove unneeded TODO
* Implement ToXContentFragment on SnapshotLifecyclePolicyItem
* Copy contents of the scheduledJobIds
* Handle snapshot lifecycle policy updates and deletions (#40062)
(Note this is a PR against the `snapshot-lifecycle-management` feature branch)
This adds logic to `SnapshotLifecycleService` to handle updates and deletes for
snapshot policies. Policies with incremented versions have the old policy
cancelled and the new one scheduled. Deleted policies have their schedules
cancelled when they are no longer present in the cluster state metadata.
Relates to #38461
* Take a snapshot for the policy when the SLM policy is triggered (#40383)
(This is a PR for the `snapshot-lifecycle-management` branch)
This commit fills in `SnapshotLifecycleTask` to actually perform the
snapshotting when the policy is triggered. Currently there is no handling of the
results (other than logging) as that will be added in subsequent work.
This also adds unit tests and an integration test that schedules a policy and
ensures that a snapshot is correctly taken.
Relates to #38461
* Record most recent snapshot policy success/failure (#40619)
Keeping a record of the results of the successes and failures will aid
troubleshooting of policies and make users more confident that their
snapshots are being taken as expected.
This is the first step toward writing history in a more permanent
fashion.
* Validate snapshot lifecycle policies (#40654)
(This is a PR against the `snapshot-lifecycle-management` branch)
With the commit, we now validate the content of snapshot lifecycle policies when
the policy is being created or updated. This checks for the validity of the id,
name, schedule, and repository. Additionally, cluster state is checked to ensure
that the repository exists prior to the lifecycle being added to the cluster
state.
Part of #38461
* Hook SLM into ILM's start and stop APIs (#40871)
(This pull request is for the `snapshot-lifecycle-management` branch)
This change allows the existing `/_ilm/stop` and `/_ilm/start` APIs to also
manage snapshot lifecycle scheduling. When ILM is stopped all scheduled jobs are
cancelled.
Relates to #38461
* Add tests for SnapshotLifecyclePolicyItem (#40912)
Adds serialization tests for SnapshotLifecyclePolicyItem.
* Fix improper import in build.gradle after master merge
* Add human readable version of modified date for snapshot lifecycle policy (#41035)
* Add human readable version of modified date for snapshot lifecycle policy
This small change changes it from:
```
...
"modified_date": 1554843903242,
...
```
To
```
...
"modified_date" : "2019-04-09T21:05:03.242Z",
"modified_date_millis" : 1554843903242,
...
```
Including the `"modified_date"` field when the `?human` field is used.
Relates to #38461
* Fix test
* Add API to execute SLM policy on demand (#41038)
This commit adds the ability to perform a snapshot on demand for a policy. This
can be useful to take a snapshot immediately prior to performing some sort of
maintenance.
```json
PUT /_ilm/snapshot/<policy>/_execute
```
And it returns the response with the generated snapshot name:
```json
{
"snapshot_name" : "production-snap-2019.04.09-rfyv3j9qreixkdbnfuw0ug"
}
```
Note that this does not allow waiting for the snapshot, and the snapshot could
still fail. It *does* record this information into the cluster state similar to
a regularly trigged SLM job.
Relates to #38461
* Add next_execution to SLM policy metadata (#41221)
* Add next_execution to SLM policy metadata
This adds the next time a snapshot lifecycle policy will be executed when
retriving a policy's metadata, for example:
```json
GET /_ilm/snapshot?human
{
"production" : {
"version" : 1,
"modified_date" : "2019-04-15T21:16:21.865Z",
"modified_date_millis" : 1555362981865,
"policy" : {
"name" : "<production-snap-{now/d}>",
"schedule" : "*/30 * * * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"foo-*",
"important"
],
"ignore_unavailable" : true,
"include_global_state" : false
}
},
"next_execution" : "2019-04-15T21:16:30.000Z",
"next_execution_millis" : 1555362990000
},
"other" : {
"version" : 1,
"modified_date" : "2019-04-15T21:12:19.959Z",
"modified_date_millis" : 1555362739959,
"policy" : {
"name" : "<other-snap-{now/d}>",
"schedule" : "0 30 2 * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"other"
],
"ignore_unavailable" : false,
"include_global_state" : true
}
},
"next_execution" : "2019-04-16T02:30:00.000Z",
"next_execution_millis" : 1555381800000
}
}
```
Relates to #38461
* Fix and enhance tests
* Figured out how to Cron
* Change SLM endpoint from /_ilm/* to /_slm/* (#41320)
This commit changes the endpoint for snapshot lifecycle management from:
```
GET /_ilm/snapshot/<policy>
```
to:
```
GET /_slm/policy/<policy>
```
It mimics the ILM path only using `slm` instead of `ilm`.
Relates to #38461
* Add initial documentation for SLM (#41510)
* Add initial documentation for SLM
This adds the initial documentation for snapshot lifecycle management.
It also includes the REST spec API json files since they're sort of
documentation.
Relates to #38461
* Add `manage_slm` and `read_slm` roles (#41607)
* Add `manage_slm` and `read_slm` roles
This adds two more built in roles -
`manage_slm` which has permission to perform any of the SLM actions, as well as
stopping, starting, and retrieving the operation status of ILM.
`read_slm` which has permission to retrieve snapshot lifecycle policies as well
as retrieving the operation status of ILM.
Relates to #38461
* Add execute to the test
* Fix ilm -> slm typo in test
* Record SLM history into an index (#41707)
It is useful to have a record of the actions that Snapshot Lifecycle
Management takes, especially for the purposes of alerting when a
snapshot fails or has not been taken successfully for a certain amount of
time.
This adds the infrastructure to record SLM actions into an index that
can be queried at leisure, along with a lifecycle policy so that this
history does not grow without bound.
Additionally,
SLM automatically setting up an index + lifecycle policy leads to
`index_lifecycle` custom metadata in the cluster state, which some of
the ML tests don't know how to deal with due to setting up custom
`NamedXContentRegistry`s. Watcher would cause the same problem, but it
is already disabled (for the same reason).
* High Level Rest Client support for SLM (#41767)
* High Level Rest Client support for SLM
This commit add HLRC support for SLM.
Relates to #38461
* Fill out documentation tests with tags
* Add more callouts and asciidoc for HLRC
* Update javadoc links to real locations
* Add security test testing SLM cluster privileges (#42678)
* Add security test testing SLM cluster privileges
This adds a test to `PermissionsIT` that uses the `manage_slm` and `read_slm`
cluster privileges.
Relates to #38461
* Don't redefine vars
* Add Getting Started Guide for SLM (#42878)
This commit adds a basic Getting Started Guide for SLM.
* Include SLM policy name in Snapshot metadata (#43132)
Keep track of which SLM policy in the metadata field of the Snapshots
taken by SLM. This allows users to more easily understand where the
snapshot came from, and will enable future SLM features such as
retention policies.
* Fix compilation after master merge
* [TEST] Move exception wrapping for devious exception throwing
Fixes an issue where an exception was created from one line and thrown in another.
* Fix SLM for the change to AcknowledgedResponse
* Add Snapshot Lifecycle Management Package Docs (#43535)
* Fix compilation for transport actions now that task is required
* Add a note mentioning the privileges needed for SLM (#43708)
* Add a note mentioning the privileges needed for SLM
This adds a note to the top of the "getting started with SLM"
documentation mentioning that there are two built-in privileges to
assist with creating roles for SLM users and administrators.
Relates to #38461
* Mention that you can create snapshots for indices you can't read
* Fix REST tests for new number of cluster privileges
* Mute testThatNonExistingTemplatesAreAddedImmediately (#43951)
* Fix SnapshotHistoryStoreTests after merge
* Remove overridden newResponse functions that have been removed
* Fix compilation for backport
* Fix get snapshot output parsing in test
* [DOCS] Add redirects for removed autogen anchors (#44380)
* Switch <tt>...</tt> in javadocs for {@code ...}
make checkpointing more robust:
- do not let checkpointing fail if indexes got deleted
- treat missing seqNoStats as just created indices (checkpoint 0)
- loglevel: do not treat failed updated checks as error
fixes#43992
This commit converts all the StreamableResponseActionType security
classes in xpack core to ActionType, implementing Writeable for their
response classes.
relates #34389
When getting authentication info from the thread context, it might be
that we encounter an I/O exception. Today we swallow this exception and
return a null authentication info to the caller. Yet, this could be
hiding bugs or errors. This commits adjusts this behavior so that we no
longer swallow the exception.
This commit creates new base classes for master node actions whose
response types still implement Streamable. This simplifies both finding
remaining classes to convert, as well as creating new master node
actions that use Writeable for their responses.
relates #34389
This commit modifies bwc behavior in FindFileStructureAction to check
against a concrete version instead of Version.CURRENT. Checking against
Version.CURRENT does not work since it is changing, in addition to it
having different meanings on each branch.
relates #42501
Rewrites how continuous data frame transforms calculates and handles buckets that require an update. Instead of storing the whole set in memory, it pages through the updates using a 2nd cursor. This lowers memory consumption and prevents problems with limits at query time (max_terms_count). The list of updates can be re-retrieved in a failure case (#43662)
This commit moves the Supplier variant of HandledTransportAction to have
a different ordering than the Writeable.Reader variant. The Supplier
version is used for the legacy Streamable, and currently having the
location of the Writeable.Reader vs Supplier in the same place forces
using casts of Writeable.Reader to select the correct super constructor.
This change in ordering allows easier migration to Writeable.Reader.
relates #34389
The base classes for transport requests and responses currently
implement Streamable and Writeable. The writeTo method on these base
classes is implemented with an empty implementation. Not only does this
complicate subclasses to think they need to call super.writeTo, but it
also can lead to not implementing writeTo when it should have been
implemented, or extendiong one of these classes when not necessary,
since there is nothing to actually implement.
This commit removes the empty writeTo from these base classes, and fixes
subclasses to not call super and in some cases implement an empty
writeTo themselves.
relates #34389
This commit adds permissions validation on the indices provided in the
enrich policy. These indices should be validated at store time so as not
to have cryptic error messages in the event the user does not have
permissions to access said indices.
AggregatorFactory was generic over itself, but it doesn't appear we
use this functionality anywhere (e.g. to allow the super class
to declare arguments/return types generically for subclasses to
override). Most places use a wildcard constraint, and even when a
concrete type is specified it wasn't used.
But since AggFactories are widely used, this led to
the generic touching many pieces of code and making type signatures
fairly complex
Previously a data frame transform would check whether the
source index was changed every 10 seconds. Sometimes it
may be desirable for the check to be done less frequently.
This commit increases the default to 60 seconds but also
allows the frequency to be overridden by a setting in the
data frame transform config.
This commit changes the way we manage refreshes in the index engines.
Instead of relying on a SearcherManager, this change uses a ReaderManager that
creates ElasticsearchDirectoryReader when needed. Searchers are now created on-demand
(when acquireSearcher is called) from the current ElasticsearchDirectoryReader.
It also slightly changes the Engine.Searcher to extend IndexSearcher in order
to simplify the usage in the consumer.
This introduces a `failed` state to which the data frame analytics
persistent task is set to when something unexpected fails. It could
be the process crashing, the results processor hitting some error,
etc. The failure message is then captured and set on the task state.
From there, it becomes available via the _stats API as `failure_reason`.
The df-analytics stop API now has a `force` boolean parameter. This allows
the user to call it for a failed task in order to reset it to `stopped` after
we have ensured the failure has been communicated to the user.
This commit also adds the analytics version in the persistent task
params as this allows us to prevent tasks to run on unsuitable nodes in
the future.
This adds the ability to execute an action for each element that occurs
in an array, for example you could sent a dedicated slack action for
each search hit returned from a search.
There is also a limit for the number of actions executed, which is
hardcoded to 100 right now, to prevent having watches run forever.
The watch history logs each action result and the total number of actions
the were executed.
Relates #34546
Przemysław Witek
David Roberts
Alpar Torok
Lee Hinman
Benjamin Trent
Dimitris Athanasiou
Yannick Welsch
Albert Zaharovits
Armin Braun
Martijn van Groningen
Jason Tedor
Rory Hunter
Andrei Dan
Yogesh Gaikwad
Gordon Brown
Ioannis Kakavas
Hendrik Muhs
James Baiera
Julie Tibshirani
Michael Basnight
Oliver Gupte
Luca Cavanna
James Rodewig
Jim Ferenczi
Andrey Ershov
Zachary Tong
Jake Landis
Albert Zaharovits
markharwood
Tim Vernum
Nick Knize
Tom Callahan
Christoph Büscher
Mayya Sharipova
Tal Levy
Ryan Ernst
David Kyle
Alexander Reelsen