This was an error-prone version type that allowed overriding previous
version semantics. It could cause primaries and replicas to be out of
sync however, so it has been removed.
Resolves#19769
This adds a version field to Templates, which is itself is unused by Elasticsearch, but exists for users to better manage their own templates. Like description, it's optional.
This was an error-prone version type that allowed overriding previous
version semantics. It could cause primaries and replicas to be out of
sync however, so it has been removed.
Resolves#19769
Currently it does not because our parsers do not support big integers/decimals
(on purpose) but we do not have to ask our parser for the number type, we can
just ask the jackson parser for a number representation of the value with the
right type.
Note that I did not add similar tests for big decimals because Jackson seems to
never return big decimals, even for decimal values that are out of the range of
values that can be represented by doubles.
Closes#11508
The mem section was buggy in cluster stats and removed. It is now added back with the same structure as in node stats, containing total memory, available memory, used memory and percentages. All the values are the sum of all the nodes across the cluster (or at least the ones that we were able to get the values from).
If elasticsearch controls the ID values as well as the documents
version we can optimize the code that adds / appends the documents
to the index. Essentially we an skip the version lookup for all
documents unless the same document is delivered more than once.
On the lucene level we can simply call IndexWriter#addDocument instead
of #updateDocument but on the Engine level we need to ensure that we deoptimize
the case once we see the same document more than once.
This is done as follows:
1. Mark every request with a timestamp. This is done once on the first node that
receives a request and is fixed for this request. This can be even the
machine local time (see why later). The important part is that retry
requests will have the same value as the original one.
2. In the engine we make sure we keep the highest seen time stamp of "retry" requests.
This is updated while the retry request has its doc id lock. Call this `maxUnsafeAutoIdTimestamp`
3. When the engine runs an "optimized" request comes, it compares it's timestamp with the
current `maxUnsafeAutoIdTimestamp` (but doesn't update it). If the the request
timestamp is higher it is safe to execute it as optimized (no retry request with the same
timestamp has been run before). If not we fall back to "non-optimzed" mode and run the request as a retry one
and update the `maxUnsafeAutoIdTimestamp` unless it's been updated already to a higher value
Relates to #19813
* Params improvements to Cluster Health API wait for shards
Previously, the cluster health API used a strictly numeric value
for `wait_for_active_shards`. However, with the introduction of
ActiveShardCount and the removal of write consistency level for
replication operations, `wait_for_active_shards` is used for
write operations to represent values for ActiveShardCount. This
commit moves the cluster health API's usage of `wait_for_active_shards`
to be consistent with its usage in the write operation APIs.
This commit also changes `wait_for_relocating_shards` from a
numeric value to a simple boolean value `wait_for_no_relocating_shards`
to set whether the cluster health operation should wait for
all relocating shards to complete relocation.
* Addresses code review comments
* Don't be lenient if `wait_for_relocating_shards` is set
While removing an index isn't actually an alias action, if we add
an alias action that deletes an index then we can delete and index
and add an alias with the same name as the index atomically, in
the same cluster state update.
Closes#20064
This commit adds the support for exclusion filter to the response filtering (filter_path) feature. It changes the XContentBuilder APIs so that it now accepts two types of filters: inclusive and exclusive. Filters are no more String arrays but sets of String instead.
Adds an explicit recoverySource field to ShardRouting that characterizes the type of recovery to perform:
- fresh empty shard copy
- existing local shard copy
- recover from peer (primary)
- recover from snapshot
- recover from other local shards on same node (shrink index action)
This makes GET operations more consistent with `_search` operations which expect
`(stored_)fields` to work on stored fields and source filtering to work on the
`_source` field. This is now possible thanks to the fact that GET operations
do not read from the translog anymore (#20102) and also allows to get rid of
`FieldMapper#isGenerated`.
The `_termvectors` API (and thus more_like_this too) was relying on the fact
that GET operations would extract fields from either stored fields or the source
so the logic to do this that used to exist in `ShardGetService` has been moved
to `TermVectorsService`. It would be nice that term vectors do not rely on this,
but this does not seem to be a low hanging fruit.
The network types in use on a cluster can be useful information to have,
so this commit adds aggregate metrics for the network types in use in a
cluster to the cluster stats.
Relates #20144
This change adds a special field named _none_ that allows to disable the retrieval of the stored fields in a search request or in a TopHitsAggregation.
To completely disable stored fields retrieval (including disabling metadata fields retrieval such as _id or _type) use _none_ like this:
````
POST _search
{
"stored_fields": "_none_"
}
````
Today we do a lot of accounting inside the engine to maintain locations
of documents inside the transaction log. This is only needed to ensure
we can return the documents source from the engine if it hasn't been refreshed.
Aside of the added complexity to be able to read from the currently writing translog,
maintainance of pointers into the translog this also caused inconsistencies like different values
of the `_ttl` field if it was read from the tlog or not. TermVectors are totally different if
the document is fetched from the tranlog since copy fields are ignored etc.
This chance will simply call `refresh` if the documents latest version is not in the index. This
streamlines the semantics of the `_get` API and allows for more optimizations inside the engine
and on the transaction log. Note: `_refresh` is only called iff the requested document is not refreshed
yet but has recently been updated or added.
#Relates to #19787
Adds ignoreUnavailable to the snapshot status API to be consistent
with the get snapshots API which has a similar parameter. If
ignoreUnavailable is set to true, then the snapshot status request
will ignore any snapshots that were not found in the repository,
instead of throwing a SnapshotMissingException.
Closes#18522
Currently both `PUT` and `POST` can be used to create indices. This commit
removes support for `POST index_name` so that we can use it to index documents
with auto-generated ids once types are removed.
Relates #15613
that have analyzer aliases in their analysis settings will still work, but
any attempts to create an alias for analyzers in newly created indices
will result in an IllegalArgumentException.
As a result, the setting `index.analysis.analyzer.{analyzerName}.alias` is
no longer supported.
Closes#18244
The payload option was introduced with the new completion
suggester implementation in v5, as a stop gap solution
to return additional metadata with suggestions.
Now we can return associated documents with suggestions
(#19536) through fetch phase using stored field (_source).
The additional fetch phase ensures that we only fetch
the _source for the global top-N suggestions instead of
fetching _source of top results for each shard.
Adds `warnings` syntax to the yaml test that allows you to expect
a `Warning` header that looks like:
```
- do:
warnings:
- '[index] is deprecated'
- quotes are not required because yaml
- but this argument is always a list, never a single string
- no matter how many warnings you expect
get:
index: test
type: test
id: 1
```
These are accessible from the docs with:
```
// TEST[warning:some warning]
```
This should help to force you to update the docs if you deprecate
something. You *must* add the warnings marker to the docs or the build
will fail. While you are there you *should* update the docs to add
deprecation warnings visible in the rendered results.
Today, when listing thread pools via the cat thread pool API, thread
pools are listed in a column-delimited format. This is unfriendly to
command-line tools, and inconsistent with other cat APIs. Instead,
thread pools should be listed in a row-delimited format.
Additionally, the cat thread pool API is limited to a fixed list of
thread pools that excludes certain built-in thread pools as well as all
custom thread pools. These thread pools should be available via the cat
thread pool API.
This commit improves the cat thread pool API by listing all thread pools
(built-in or custom), and by listing them in a row-delimited
format. Finally, for each node, the output thread pools are sorted by
thread pool name.
Relates #19721
* Rename operation to result and reworking responses
* Rename DocWriteResponse.Operation enum to DocWriteResponse.Result
These are just easier to interpret names.
Closes#19664
Before this commit when an index pattern is used to filter the cluster state, only indices metadata are populated and routing table is just empty. This commit aligns the behavior of the filtering of cluster state's routing table with the filtering of cluster state's metadata so that coherent data are returned for both routing table & metadata when index pattern is requested.
This adds an extra REST handler for "_ingest/pipeline" so that users do not need to supply "_ingest/pipeline/*" to get all of them.
- Also adds a teardown section to related REST-tests for ingest.
Performing the bulk request shown in #19267 now results in the following:
```
{"_index":"test","_type":"test","_id":"1","_version":1,"_operation":"create","forced_refresh":false,"_shards":{"total":2,"successful":1,"failed":0},"status":201}
{"_index":"test","_type":"test","_id":"1","_version":1,"_operation":"noop","forced_refresh":false,"_shards":{"total":2,"successful":1,"failed":0},"status":200}
```
When the request body is missing, all documents in the target index are counted.
As mentioned in #19422, the same should happen when the request body is an empty
json object. This is also the behaviour for the `_search` endpoint and the two
APIs should behave in the same way.
With #19140 we started persisting the node ID across node restarts. Now that we have a "stable" anchor, we can use it to generate a stable default node name and make it easier to track nodes over a restarts. Sadly, this means we will not have those random fun Marvel characters but we feel this is the right tradeoff.
On the implementation side, this requires a bit of juggling because we now need to read the node id from disk before we can log as the node node is part of each log message. The PR move the initialization of NodeEnvironment as high up in the starting sequence as possible, with only one logging message before it to indicate we are initializing. Things look now like this:
```
[2016-07-15 19:38:39,742][INFO ][node ] [_unset_] initializing ...
[2016-07-15 19:38:39,826][INFO ][node ] [aAmiW40] node name set to [aAmiW40] by default. set the [node.name] settings to change it
[2016-07-15 19:38:39,829][INFO ][env ] [aAmiW40] using [1] data paths, mounts [[ /(/dev/disk1)]], net usable_space [5.5gb], net total_space [232.6gb], spins? [unknown], types [hfs]
[2016-07-15 19:38:39,830][INFO ][env ] [aAmiW40] heap size [1.9gb], compressed ordinary object pointers [true]
[2016-07-15 19:38:39,837][INFO ][node ] [aAmiW40] version[5.0.0-alpha5-SNAPSHOT], pid[46048], build[473d3c0/2016-07-15T17:38:06.771Z], OS[Mac OS X/10.11.5/x86_64], JVM[Oracle Corporation/Java HotSpot(TM) 64-Bit Server VM/1.8.0_51/25.51-b03]
[2016-07-15 19:38:40,980][INFO ][plugins ] [aAmiW40] modules [percolator, lang-mustache, lang-painless, reindex, aggs-matrix-stats, lang-expression, ingest-common, lang-groovy, transport-netty], plugins []
[2016-07-15 19:38:43,218][INFO ][node ] [aAmiW40] initialized
```
Needless to say, settings `node.name` explicitly still works as before.
The commit also contains some clean ups to the relationship between Environment, Settings and Plugins. The previous code suggested the path related settings could be changed after the initial Environment was changed. This did not have any effect as the security manager already locked things down.
making the test wait until all urgent requests are completed before
finishing, so that tear down can properly delete the created index
and cleanup. Without this wait, it was possible that the test would
finish and cleanup the deleted indices would happen before the
index creation even processed, causing the test to leave a created
index behind.
Lee Hinman
Chris Earle
Luca Cavanna
Adrien Grand
javanna
Simon Willnauer
Ali Beyad
Nik Everett
Tanguy Leroux
Greg Marzouka
Jun Ohtani
Yannick Welsch
Jason Tedor
Jim Ferenczi
Clinton Gormley
Ryan Ernst
Areek Zillur
Igor Motov
Alexander Lin
Martijn van Groningen
Christoph Büscher
Boaz Leskes
Karel Minarik