2.x has show so far that running with security manager is the way to go.
This commit make this non-optional. Users that need to pass their own rules
can still do this via the system configuration for the security manager. They
can even opt out of all security that way.
This commit moves IndicesRequestCache into o.e.indics and makes all API in this
class package private. All references to SearchReqeust, SearchContext etc. have been factored
out and relevant glue code has been added to IndicesService. The IndicesRequestCache is not a
simple class without any hard dependencies on ThreadPool nor SearchService or IndexShard. This now
allows to add unittests.
This commit also removes two settings `indices.requests.cache.clean_interval` and `indices.fielddata.cache.clean_interval`
in favor of `indices.cache.clean_interval` which cleans both caches.
The cat API previously used the Content-Type header field for
determining the media type of the response. This is in opposition to the
HTTP spec which specifies the Accept header field for this purpose. This
commit replaces the use of the Content-Type header field with the Accept
header field in the cat API.
Closes#14421
As a prerequisite for refactoring the whole PhraseSuggestionBuilder
to be able to be parsed and streamed from the coordinating node, the
DirectCandidateGenerator must implement Writeable, be able to parse
a new instance (fromXContent()) and later when transported to the
shard to generate a PhraseSuggestionContext.DirectCandidateGenerator.
Also adding equals/hashCode and tests and moving DirectCandidateGenerator
to its own DirectCandidateGeneratorBuilder class.
This commit limits the `index.translog.sync_interval` to a value not less than `100ms` and
removes the support for fsync on every operation which used to be enabled if `index.translog.sync_interval` was set to `0s`
Now this pr also only schedules an async fsync if the durability is set to `async`. By default not async task is scheduled.
Closes#16152
This commit converts the script mode settings to the new settings
infrastructure. This is a major refactoring of the handling of script
mode settings. This refactoring is necessary because these settings are
determined at runtime based on the registered script engines and the
registered script contexts.
Doc values can now only be enabled by setting `doc_values: true` in the
mappings. Removing this feature also means that we can now fail mapping updates
that try to disable doc values.
Doc values currently default to `true` if the field is indexed and not analyzed.
So setting `index:no` automatically disables doc values, which is not explicit
in the documentation.
This commit makes doc values default to true for numerics, booleans regardless
of whether they are indexed. Not indexed strings still don't have doc values,
since we can't know whether it is rather a text or keyword field. This
potential source of confusion should go away when we split `string` into `text`
and `keyword`.
RescoreBuilder: Add parsing and creating of RescoreSearchContext
Adding the ability to parse from xContent to the rescore builder. Also making RescoreBuilder an abstract base class that encapsulates the window_size setting, with QueryRescoreBuilder as its only implementation at the moment.
Relates to #15559
This commit modifies the default setting for standard output in the
systemd configuration to the journal instead of /dev/null. This is to
address a user pain point where Elasticsearch would fail to start but
the error message would be sent to standard output and therefore
/dev/null leading to difficult-to-debug situations.
* Cleaned up MapperService#searchFilter(...) and moved it DefaultSearchContext, since it that class was the only user. As part of the cleanup percolate query documents are no longer excluded from the search response.
* Removed resolveClosestNestedObjectMapper(...) method as it was no longer used.
* Removed DocumentTypeListener infrastructure. Before it was used by the percolator and parent/child, but these features no longer use it.
Closes#15924
* Remove remaining 1.x bwc logic.
* Stop storing stored fields and indexed terms. The _parent field's only purpose is to support joins between parent and child type and only storing doc values is sufficient.
* In the mapping the parent field mapper is now known under '{parent}#{child}' key, because this is the field the parent/child join uses too.
* Added new sub fetch phase to lookup that _parent field from doc values field if that is required (before this was fetched from stored _parent field)
* Removed the ability to query directly on `_parent` in the query dsl. Instead the `{parent}#{child}` field should be used. Under the hood a doc values query is used instead of a term query, because only doc values fields are stored now.
* Added a new `parent_id` query to easily query child documents with a specific parent id without having to know what join field to use
* Also in aggregations `_parent` field can't be used any more and `{parent}#{child}` field name should be used instead to aggregate directly on the _parent join field.
This commit modifies the load_average in the node stats API response
to be an object containing the one-minute, five-minute and
fifteen-minute load averages as fields (if those values are
available). Additionally, this commit modifies the cat nodes API
response to format the one-minute, five-minute and fifteen-minute load
averages as null if any of the respective values are not available.
The indexing buffer on a node (default: 10% of the JVM heap) is now a "shared pool" across all shards on that node. This way, shards doing intense indexing can use much more than other shards doing only light indexing, and only once the sum of all indexing buffers across all shards exceeds the node's indexing buffer will we ask shards to move recently indexed documents to segments on disk.
Warmers are now barely useful and will be removed in 3.0. Note that this only
removes the warmer API and query-based warmers. We still have warmers internally
for eg. global ordinals.
Close#15607
* Added percolator field mapper that extracts the query terms and indexes these terms with the percolator query.
* At percolate time these extracted terms are used to query percolator queries that are like to be evaluated. This can significantly cut down the time it takes to percolate. Whereas before all percolator queries were evaluated if they matches with the document being percolated.
* Changes made to percolator queries are no longer immediately visible, a refresh needs to happen before the changes are visible.
* By default the percolate api only returns upto 10 matches instead of returning all matching percolator queries.
* Made percolate more modular, so that it is easier to add unit tests.
* Added unit tests for the percolator.
Closes#12664Closes#13646
When specifying a string field, you can either do:
```
{
"foo": "bar"
}
```
or
```
{
"foo": {
"value": "bar",
"boost": 42
}
}
```
The latter option is now removed.
Closes#15388
Today we throttle recoveries only for incoming recoveries. Nodes that have a lot
of primaries can get overloaded due to too many recoveries. To still keep that at bay
we limit the number of threads that are sending files to the target to overcome this problem.
The right solution here is to also throttle the outgoing recoveries that are today unbounded on
the master and don't start the recovery until we have enough resources on both source and target nodes.
The concurrency aspects of the recovery source also added a lot of complexity and additional threadpools
that are hard to configure. This commit removes the concurrent streamns notion completely and sends files
in the thread that drives the recovery simplifying the recovery code considerably.
Outgoing recoveries are not throttled on the master via a allocation decider.
Today we have two variants of translogs for indexing. We only recommend the buffered
one which also has a 20% advantage in indexing speed. This commit removes the option and defaults
to the buffered case. It also hard-wires the translog buffer to 8kb instead of 64kb. We used to
adjust that buffer based on if the shard is active or not, this code has also been removed and
instead we just keep an 8kb buffer arround.
This option allows to force the xcontent type to use to store the `_source`
document. The default is to use the same format as the input format.
This commit makes this option ignored for 2.x indices and rejected for 3.0
indices.
As a replacement use ExistsQueryBuilder inside a mustNot() clause.
So instead of using `new ExistsQueryBuilder(name)` now use:
`new BoolQueryBuilder().mustNot(new ExistsQueryBuilder(name))`.
Closes#14112
throw exception if a copy_to is within a multi field
Copy to within multi field is ignored from 2.0 on, see #10802.
Instead of just ignoring it, we should throw an exception if this
is found in the mapping when a mapping is added. For already
existing indices we should at least log a warning.
We remove the copy_to in any case.
related to #14946
When using S3 or EC2, it was possible to use a proxy to access EC2 or S3 API but username and password were not possible to be set.
This commit adds support for this. Also, to make all that consistent, proxy settings for both plugins have been renamed:
* from `cloud.aws.proxy_host` to `cloud.aws.proxy.host`
* from `cloud.aws.ec2.proxy_host` to `cloud.aws.ec2.proxy.host`
* from `cloud.aws.s3.proxy_host` to `cloud.aws.s3.proxy.host`
* from `cloud.aws.proxy_port` to `cloud.aws.proxy.port`
* from `cloud.aws.ec2.proxy_port` to `cloud.aws.ec2.proxy.port`
* from `cloud.aws.s3.proxy_port` to `cloud.aws.s3.proxy.port`
New settings are `proxy.username` and `proxy.password`.
```yml
cloud:
aws:
protocol: https
proxy:
host: proxy1.company.com
port: 8083
username: myself
password: theBestPasswordEver!
```
You can also set different proxies for `ec2` and `s3`:
```yml
cloud:
aws:
s3:
proxy:
host: proxy1.company.com
port: 8083
username: myself1
password: theBestPasswordEver1!
ec2:
proxy:
host: proxy2.company.com
port: 8083
username: myself2
password: theBestPasswordEver2!
```
Note that `password` is filtered with `SettingsFilter`.
We also fix a potential issue in S3 repository. We were supposed to accept key/secret either set under `cloud.aws` or `cloud.aws.s3` but the actual code never implemented that.
It was:
```java
account = settings.get("cloud.aws.access_key");
key = settings.get("cloud.aws.secret_key");
```
We replaced that by:
```java
String account = settings.get(CLOUD_S3.KEY, settings.get(CLOUD_AWS.KEY));
String key = settings.get(CLOUD_S3.SECRET, settings.get(CLOUD_AWS.SECRET));
```
Also, we extract all settings for S3 in `AwsS3Service` as it's already the case for `AwsEc2Service` class.
Closes#15268.
Do not to load fields from _source when using the `fields` option.
Non stored (non existing) fields are ignored by the fields visitor when using the `fields` option.
Fixes#10783
Support * wildcard to retrieve stored fields when using the `fields` option.
Supported pattern styles are "xxx*", "*xxx", "*xxx*" and "xxx*yyy".
We actually want to keep the test when using deprecated setting in 3.0.
We will keep this setting deprecated as well so people will be able to update in a smoother way.
Also add the deprecating information to the migration documentation.
query_binary and filter_binary are unused at this point, as we only parse on the coordinating node and the java api only holds structured java objects for queries and filters, meaning they all implement Writeable and get natively serialized.
Relates to #14308Closes#14433
This commit forbids the changing of thread pool types for any thread
pool. The motivation here is that these are expert settings with
little practical advantage.
Closes#14294, relates #2509, relates #2858, relates #5152
Removes the mapping transform feature which when used made debugging very
difficult. Users should transform their documents on the way into
Elasticsearch rather than having Elasticsearch do it.
Closes#12674
We have two types of parse methods for queries: one for the inner query, to be used once the parser is positioned within the query element, and one for the whole query source, including the query element that wraps the actual query.
With the search refactoring we ended up using the former in count, cat count and delete by query, whereas we should have used the former. It ends up working properly given that we have a registered (deprecated) query called "query", which used to allow to wrap a filter into a query, but this has the following downsides:
1) prevents us from removing the deprecated "query" query
2) we end up supporting a top level query that is not wrapped within a query element (pre 1.0 syntax iirc that shouldn't be supported anymore)
This commit finally removes the "query" query and fixes the related parsing bugs. We also had some tests that were providing queries in the wrong format, those have been fixed too.
Closes#13326Closes#14304
* Allow for multiple host specifications (e.g. _en0_,192.168.1.2,_site_).
* Add _site_ and _global_ scopes as counterparts to _local_.
* Warn on heuristic selection of publish address.
* Remove the arbitrary _non_loopback_ setting.
Closes#13954
Simon Willnauer
Jim Ferenczi
Dongjoon Hyun
Spencer
Clinton Gormley
Jason Tedor
Andrej Kazakov
Yannick Welsch
Prayag Verma
Ryan Ernst
Christoph Büscher
Martijn van Groningen
Simon Willnauer
Adrien Grand
Mathias Fussenegger
Nik Everett
Michael McCandless
Michael McCandless
David Pilato
Britta Weber
Lee Hinman
Jim Ferenczi
Peter Lebedev
Shaunak Kashyap
Mark Walkom
javanna
Jason O'Donnell
Robert Muir