xContent ordering is unreliable when derived from map insertions but the parsed objects’ .equals() methods have the sort logic required to prove connections and vertices are correct. Disabled the xContent equivalence checks.
Closes#33686
In 54cb890 a setting for testing only was introduced, that delayed the start up of watcher. With the changes of how is watcher is started/stopped over time, this is not needed anymore.
Security caches the result of role lookups and negative lookups are
cached indefinitely. In the case of transient failures this leads to a
bad experience as the roles could truly exist. The CompositeRolesStore
needs to know if a failure occurred in one of the roles stores in order
to make the appropriate decision as it relates to caching. In order to
provide this information to the CompositeRolesStore, the return type of
methods to retrieve roles has changed to a new class,
RoleRetrievalResult. This class provides the ability to pass back an
exception to the roles store. This exception does not mean that a
request should be failed but instead serves as a signal to the roles
store that missing roles should not be cached and neither should the
combined role if there are missing roles.
As part of this, the negative lookup cache was also changed from an
unbounded cache to a cache with a configurable limit.
Relates #33205
PR #34290 made it impossible to use thread-context values to pass
authentication metadata out of a realm. The SAML realm used this
technique to allow the SamlAuthenticateAction to process the parsed
SAML token, and apply them to the access token that was generated.
This new method adds metadata to the AuthenticationResult itself, and
then the authentication service makes this result available on the
thread context.
Closes: #34332
The ingest pipeline that is produced is very simple. It
contains a grok processor if the format is semi-structured
text, a date processor if the format contains a timestamp,
and a remove processor if required to remove the interim
timestamp field parsed out of semi-structured text.
Eventually the UI should offer the option to customize the
pipeline with additional processors to perform other data
preparation steps before ingesting data to an index.
In ccb9ab5717 we changed how we deal with time
fields to support the `DateTime`-format fields added in 6.0, but dropped
support for pre-6.x `Long`-format fields. This change reinstates this support
for cases where pre-6.x data is made available to ML (e.g. in a mixed-version
CCS setup or after an upgrade).
ListenableFuture may run a listener on the same thread that called the
addListener method or it may execute on another thread after the future
has completed. Whenever the ListenableFuture stores the listener for
execution later, it should preserve the thread context which is what
this change does.
Today we rewrite the operations from the leader with the term of the
following primary because the follower should own its history. The
problem is that a newly promoted primary may re-assign its term to
operations which were replicated to replicas before by the previous
primary. If this happens, some operations with the same seq_no may be
assigned different terms. This is not good for the future optimistic
locking using a combination of seqno and term.
This change ensures that the primary of a follower only processes an
operation if that operation was not processed before. The skipped
operations are guaranteed to be delivered to replicas via either
primary-replica resync or peer-recovery. However, the primary must not
acknowledge until the global checkpoint is at least the highest seqno of
all skipped ops (i.e., they all have been processed on every replica).
Relates #31751
Relates #31113
* New OCTET_LENGTH function
* Changed the way the FunctionRegistry stores functions, considering the alphabetic ordering by name
* Added documentation for the RANDOM function
Since all calls to `ESLoggerFactory` outside of the logging package were
deprecated, it seemed like it'd simplify things to migrate all of the
deprecated calls and declare `ESLoggerFactory` to be package private.
This does that.
Also fixed ShardFollowNodeTaskTests to not return ops when responseSize
is empty. Otherwise ops are returned when no ops are expected to be returned.
Co-authored-by: Jason Tedor <jason@tedor.me>
Unfollow should be allowed / disallowed on a per index level instead of
cluster level.
Also renamed `create_follow_index` index privilege to
`manage_follow_index` privilege and include unfollow and close APIs.
This commit modifies the follow stats API response structure to more
clearly highlight meaning of the higher level fields. In particular,
previously the response had a top-level key for each index. Instead, we
nest the indices under an "indices" field which is now an array. The
values in this array are objects containing two fields: "index" which is
the name of the follower index, and "shards" which is an array where
each value in the array is the follower stats for that shard. That is,
we have gone from:
{
"bar": [
{
"shard_id": 0...
}...
]...
}
to
{
"indices": [
{
"index": "bar",
"shards": [
{
"shard_id": 0...
}...
]
}...
}
In the CCR docs we want to refer to the endpoint that returns following
stats as the follow stats API. This commit renames the internal
implementation of this endpoint to reflect this usage.
The "lookupUser" method on a realm facilitates the "run-as" and
"authorization_realms" features.
This commit allows a realm to be used for "lookup only", in which
case the "authenticate" method (and associated token methods) are
disabled.
It does this through the introduction of a new
"authentication.enabled" setting, which defaults to true.
Building automatons can be costly. For the most part we cache things
that use automatons so the cost is limited.
However:
- We don't (currently) do that everywhere (e.g. we don't cache role
mappings)
- It is sometimes necessary to clear some of those caches which can
cause significant CPU overhead and processing delays.
This commit introduces a new cache in the Automatons class to avoid
unnecesarily recomputing automatons.
There may be values in the thread context that ought to be preseved
for later use, even if one or more realms perform asynchronous
authentication.
This commit changes the AuthenticationService to wrap the potentially
asynchronous calls in a ContextPreservingActionListener that retains
the original thread context for the authentication.
This changes the delete job API by adding
the choice to delete a job asynchronously.
The commit adds a `wait_for_completion` parameter
to the delete job request. When set to `false`,
the action returns immediately and the response
contains the task id.
This also changes the handling of subsequent
delete requests for a job that is already being
deleted. It now uses the task framework to check
if the job is being deleted instead of the cluster
state. This is a beneficial for it is going to also
be working once the job configs are moved out of the
cluster state and into an index. Also, force delete
requests that are waiting for the job to be deleted
will not proceed with the deletion if the first task
fails. This will prevent overloading the cluster. Instead,
the failure is communicated better via notifications
so that the user may retry.
Finally, this makes the `deleting` property of the job
visible (also it was renamed from `deleted`). This allows
a client to render a deleting job differently.
Closes#32836
Drops the last logging constructor that takes `Settings` because it is
no longer needed.
Watcher goes through a lot of effort to pass `Settings` to `Logger`
constructors and dropping `Settings` from all of those calls allowed us
to remove quite a bit of log-based ceremony from watcher.
The Security plugin authorizes actions on indices. Authorization
happens on a per index/alias basis. Therefore a request with a
Multi Index Expression (containing wildcards) has to be
first evaluated in the authorization layer, before the request is
handled. For authorization purposes, wildcards in expressions will
only be expanded to indices/aliases that are visible by the authenticated
user. However, this "constrained" evaluation has to be compatible with
the expression evaluation that a cluster without the Security plugin
would do. Therefore any change in the evaluation logic
in any of these sites has to be mirrored in the other site.
This commit mirrors the changes in core from #33518 that allowed
for Multi Index Expression in the Get Alias API, loosely speaking.
This enables Elasticsearch to use the JVM-wide configured
PKCS#11 token as a keystore or a truststore for its TLS configuration.
The JVM is assumed to be configured accordingly with the appropriate
Security Provider implementation that supports PKCS#11 tokens.
For the PKCS#11 token to be used as a keystore or a truststore for an
SSLConfiguration, the .keystore.type or .truststore.type must be
explicitly set to pkcs11 in the configuration.
The fact that the PKCS#11 token configuration is JVM wide implies that
there is only one available keystore and truststore that can be used by TLS
configurations in Elasticsearch.
The PIN for the PKCS#11 token can be set as a truststore parameter in
Elasticsearch or as a JVM parameter ( -Djavax.net.ssl.trustStorePassword).
The basic goal of enabling PKCS#11 token support is to allow PKCS#11-NSS in
FIPS mode to be used as a FIPS 140-2 enabled Security Provider.
When the cluster.routing.allocation.disk.watermark.flood_stage watermark
is breached, DiskThresholdMonitor marks the indices as read-only. This
failed when x-pack security was present as system user does not have the privilege
for update settings action("indices:admin/settings/update").
This commit adds the required privilege for the system user. Also added missing
debug logs when access is denied to help future debugging.
An assert statement is added to catch any missed privileges required for
system user.
Closes#33119
In SessionFactoryLoadBalancingTests#testRoundRobinWithFailures()
we kill ldap servers randomly and immediately bind to that port
connecting to mock server socket. This is done to avoid someone else
listening to this port. As the creation of mock socket and binding to the
port is immediate, sometimes the earlier socket would be in TIME_WAIT state
thereby having problems with either bind or connect.
This commit sets the SO_REUSEADDR explicitly to true and also sets
the linger on time to 0(as we are not writing any data) so as to
allow re-use of the port and close immediately.
Note: I could not find other places where this might be problematic
but looking at test runs and netstat output I do see lot of sockets
in TIME_WAIT. If we find that this needs to be addressed we can
wrap ServerSocketFactory to set these options and use that with in
memory ldap server configuration during tests.
Closes#32190
This commit upgrades the unboundid ldapsdk to version 4.0.8. The
primary driver for upgrading is a fix that prevents this library from
rewrapping Error instances that would normally bubble up to the
UncaughtExceptionHandler and terminate the JVM. Other notable changes
include some fixes related to connection handling in the library's
connection pool implementation.
Closes#33175
The `DnRoleMapper` class is used to map distinguished names of groups
and users to role names. This mapper builds in an internal map that
maps from a `com.unboundid.ldap.sdk.DN` to a `Set<String>`. In cases
where a lot of distinct DNs are mapped to roles, this can consume quite
a bit of memory. The majority of the memory is consumed by the DN
object. For example, a 94 character DN that has 9 relative DNs (RDN)
will retain 4KB of memory, whereas the String itself consumes less than
250 bytes.
In order to reduce memory usage, we can map from a normalized DN string
to a List of roles. The normalized string is actually how the DN class
determines equality with another DN and we can drop the overhead of
needing to keep all of the other objects in memory. Additionally the
use of a List provides memory savings as each HashSet is backed by a
HashMap, which consumes a great deal more memory than an appropriately
sized ArrayList. The uniqueness we get from a Set is maintained by
first building a set when parsing the file and then converting to a
list upon completion.
Closes#34237
Today we reverse the initial order of the nested documents when we
index them in order to ensure that parents documents appear after
their children. This means that a query will always match nested documents
in the reverse order of their offsets in the source document.
Reversing all documents is not needed so this change ensures that parents
documents appear after their children without modifying the initial order
in each nested level. This allows to match children in the order of their
appearance in the source document which is a requirement to efficiently
implement #33587. Old indices created before this change will continue
to reverse the order of nested documents to ensure backwark compatibility.
The follower index shard history UUID will be fetched from the indices stats api when the shard follow task starts and will be provided with the bulk shard operation requests. The bulk shard operations api will fail if the provided history uuid is unequal to the actual history uuid.
No longer record the leader history uuid in shard follow task params, but rather use the leader history UUIDs directly from follower index's custom metadata. The resume follow api will remain to fail if leader index shard history UUIDs are missing.
Closes#33956
Revert "[TESTS] Pin MockWebServer to TLS1.2 (#33127)" (commit
214652d4af) and "Pin TLS1.2 in
SSLConfigurationReloaderTests" (commit
d9f5e4fd2e), which pinned the
MockWebServer used in the SSLConfigurationReloaderTests to TLSv1.2 in
order to prevent failures with JDK 11 related to ssl session
invalidation. We no longer need this pinning as the problematic code
was fixed in #34130.
The `-` and `+` as a number literal prefix are already
parsed by the rule in `valueExpression`. To accommodate
this, there are some code changes that enables the
`ExpressionBuilder` to parse Literal integers and decimals
together with the `-/+` prefix sign (if exists) and validate
them (wrong format, large numbers, etc.).
Follows: #33854
Adds support for the get rollup job to the High Level REST Client. I had
to do three interesting and unexpected things:
1. I ported the rollup state wiping code into the high level client
tests. I'll move this into the test framework in a followup and remove
the x-pack version.
2. The `timeout` in the rollup config was serialized using the
`toString` representation of `TimeValue` which produces fractional time
values which are more human readable but aren't supported by parsing. So
I switched it to `getStringRep`.
3. Refactor the xcontent round trip testing utilities so we can test
parsing of classes that don't implements `ToXContent`.
Previously, parsing an arithmetic expression with `*` and no spaces,
e.g.: `2*i` threw a parsing exception as the grammar rule for
tableIdentifier was clashing with the rule for arithmetic operator `*`.
This issue comes already in the lexer and the left part of the
expression (in our example `2*`) was recognised as a
TABLE_IDENTIFIER token.
The solution adopted is to allow the `*` wildcard in the table name
only if it's surrounded with double quotes, e.g.: `"my*index"`
Closes: #33957
Remove CamelCase to CAMEL_CASE conversion when resolving
a function. Only convert user input to upper case and then
try to match with aliases or primary names.
Keep the internal conversion FunctionName to FUNCTION__NAME
which provides flexibility when registering functions by their class
name.
Fixes: #34114
We use wrap code in `// tag` and `//end` to include it in our docs. Our
current docs style wraps code snippets in a box that is only wide enough
for 76 characters and adds a horizontal scroll bar for wider snippets
which makes the snippet much harder to read. This adds a checkstyle check
that looks for java code that is included in the docs and is wider than
that 76 characters so all snippets fit into the box. It solves many of
the failures that this catches but suppresses many more. I will clean
those up in a follow up change.
Since #34099, the FollowingEngine will skip an operation which was
already processed before. With that change, it should be okay to unmute
testFollowIndexAndCloseNode.
This change fixes a potential deadlock problem in the unit
test introduced in #34117.
It also removes a piece of debug code and corrects a docs
formatting problem that were both added in that same PR.
This arose when two commits were pushed at roughly the same time, both
of which compiled successfully against master, but not when taken
together. This commit fixes a reference in one of the commits that was
changed in the other commit.
This commit modifies the CCR stats endpoint for indices to be
/{index}/_ccr/stats. This makes this endpoint consistent with other
index-centric endpoints like indices stats.
The unfollow API changes a follower index into a regular index, so that it will accept write requests from clients.
For the unfollow api to work the index follow needs to be stopped and the index needs to be closed.
Closes#33931
This change introduces the indexing optimization using sequence numbers
in the FollowingEngine. This optimization uses the max_seq_no_updates
which is tracked on the primary of the leader and replicated to replicas
and followers.
Relates #33656
This can be used to restrict the amount of CPU a single
structure finder request can use.
The timeout is not implemented precisely, so requests
may run for slightly longer than the timeout before
aborting.
The default is 25 seconds, which is a little below
Kibana's default timeout of 30 seconds for calls to
Elasticsearch APIs.
Prior to following an index in the follow API, check whether current
user has sufficient privileges in the leader cluster to read and
monitor the leader index.
Also check this in the create and follow API prior to creating the
follow index.
Also introduced READ_CCR cluster privilege that include the minimal
cluster level actions that are required for ccr in the leader cluster.
So a user can follow indices in a cluster, but not use the ccr admin APIs.
Closes#33553
Co-authored-by: Jason Tedor <jason@tedor.me>
In prior versions of Java, we expected to see a SSLHandshakeException
when starting a handshake with a server that we do not trust. In JDK11,
the exception has changed to a SSLException, which
SSLHandshakeException extends. This is most likely a side effect of the
TLS 1.3 changes in JDK11. This change updates the test to catch the
SSLException instead of the SSLHandshakeException and enables the test
to work on JDK8 through JDK11.
Closes#29989
The SSLService invalidates SSLSessions when there is a change to any of
the underlying key or trust material. However, this invalidation code
did not check for a null SSLSession being returned from the context and
assumed that the context would always return a non-null object. The
return of a null object is possible in all versions, but JDK11 seems to
return them more often due to changes for TLS 1.3. There are a number
of reasons that we get a id of a session but the context returns null
when the session with that id is requested. Some of the reasons for
this are:
* Session was evicted by session cache
* Session has timed out
* Session has been invalidated by another caller
To handle this, the SSLService now checks if the value is null before
calling invalidate on the SSLSession.
Closes#32124
This commit removes the use of ExecutableScript from watcher in favor of
custom script contexts for both watcher condition scripts and transform
scripts.
In prior versions of Java, we expected to see a SSLHandshakeException
when starting a handshake with a server that we do not trust. In JDK11,
the exception has changed to a SSLException, which
SSLHandshakeException extends. This is most likely a side effect of the
TLS 1.3 changes in JDK11. This change updates the test to catch the
SSLException instead of the SSLHandshakeException and enables the test
to work on JDK8 through JDK11.
Closes#32293
The following changes were made:
* Added ElasticsearchSecurityException. For in the case the current user has insufficient privileges while an index is being followed. Prior to following ccr checks whether the current user has sufficient privileges and if not the follow api fails with an error.
* Added Index block exception. If the leader index gets closed, this exception is returned.
* Added ClusterBlockException service unavailable. In case for example the leader cluster is without elected master.
* Removed IndexNotFoundException. If the leader / follower index has been deleted, ccr will need to stop the shard follow tasks with an error.
Closes#33954
Fixes the equals and hash function to ignore the order of aggregations to ensure equality after serialization
and deserialization. This ensures storing configs with aggregation works properly.
This also addresses a potential issue in caching when the same query contains aggregations but in
different order. 1st it will not hit in the cache, 2nd cache objects which shall be equal might end up twice in
the cache.
Due to a bug, that was fixed in #33360 and commit
1de2a925ce the initial adding of a watch
could get lost, thus leaving the watcher stats count as zero despite adding a watch.
Closes#33326
* Renamed CCR APIs
Renamed:
* `/{index}/_ccr/create_and_follow` to `/{index}/_ccr/follow`
* `/{index}/_ccr/unfollow` to `/{index}/_ccr/pause_follow`
* `/{index}/_ccr/follow` to `/{index}/_ccr/resume_follow`
Relates to #33931
always use `IndicesOptions.strictExpand()` for indices options.
The follow index may be closed and we still want to get stats from
shard follow task and the whether the provided index name matches with
follow index name is checked when locating the task itself in the ccr
stats transport action.
`Settings` is no longer required to get a `Logger` and we went to quite
a bit of effort to pass it to the `Logger` getters. This removes the
`Settings` from all of the logger fetches in security and x-pack:core.
Centralize and simplify the script generation between operators and functions which are currently decoupled. As part of this process most predicates (<, <=, etc...) were made ScalarFunction as their purpose and functionality is quite similar (see % and MOD functions).
Renamed ProcessDefinition to Pipe
Add ScriptWeaver as a mixin-in interface for script customization
Add logic for equals/lte/lt
Improve BinaryOperator/expression toString
Minimize duplication across string functions
Close#33975
This commit adds the ability to plug in compilation of custom contexts
in mock script engine. This is needed for testing plugins which add
custom contexts like watcher.
Watcher is using a lot of so called TextTemplate fields in a watch
definition, which can use mustache to insert the watch id for example.
For the user it is non-obvious which field is just a string field or
which field is a text template.
This also means, that for every such field, we currently do a script
compilation, even if the field does not contain any mustache syntax.
This will lead to an increased script cache churn, because those
compiled scripts (that only contain a string), will evict other scripts.
On top of that, this also means that an unneeded compilation has
happened, instead of returning that string immediately.
The usages of mustache templating are in all of the actions (most of the time far
more than one compilation) as well as most of the inputs.
Especially when running a lot of watches in parallel, this will reduce
execution times and help reuse of real scripts.
Security previously hardcoded a default scroll keepalive of 10 seconds,
but in some cases this is not enough time as there can be network
issues or overloading of host machines. After this change, security
will now use the default keepalive timeout, which is controllable using
a setting and the default value is 5 minutes.
In order to optimize the use of the role cache, when the roles.yml file
is reloaded we now calculate the names of removed, changed, and added
roles so that they may be passed to any listeners. This allows a
listener to selectively clear cache for only the roles that have been
modified. The CompositeRolesStore has been adapted to do exactly that
so that we limit the need to reload roles from sources such as the
native roles stores or external role providers.
See #33205
This commits creates a DateMathParser interface, which is already
implemented for both joda and java time. While currently the java time
DateMathParser is not used, this change will allow a followup which will
create a DateMathParser from a DateFormatter, so the caller does not
need to know the internals of the DateFormatter they have.
This change cleans up "unused variable" warnings. There are several cases were we
most likely want to suppress the warnings (especially in the client documentation test
where the snippets contain many unused variables). In a lot of cases the unused
variables can just be deleted though.
This commit replicates the max_seq_no_of_updates on the leading index
to the primaries of the following index via ShardFollowNodeTask. The
max_seq_of_updates is then transmitted to the replicas of the follower
via replication requests (that's BulkShardOperationsRequest).
Relates #33656
Implement circuit breaker logic in the parser which catches expressions
that can blow up the tree and result in StackOverflowError being thrown.
Co-authored-by: Costin Leau <costin.leau@gmail.com>
[ML] Modify thresholds for normalization triggers
The (arbitrary) threshold factors used to judge if scores have
changed significantly enough to trigger a look-back renormalization have
been changed to values that reduce the frequency of such
renormalizations.
Added a clause to treat changes in scores as a 'big change' if it would
result in a change of severity reported in the UI.
Also altered the clause affecting small scores so that a change should
be considered big if scores have changed by at least 1.5.
Relates https://github.com/elastic/machine-learning-qa/issues/263
We start tracking max seq_no_of_updates on the primary in #33842. This
commit replicates that value from a primary to its replicas in replication
requests or the translog phase of peer-recovery.
With this change, we guarantee that the value of max seq_no_of_updates
on a replica when any index/delete operation is performed at least the
max_seq_no_of_updates on the primary when that operation was executed.
Relates #33656
Previously the timestamp_formats field in the response
from the find_file_structure endpoint contained Joda
timestamp formats. This change makes that clear by
renaming the field to joda_timestamp_formats, and also
adds a java_timestamp_formats field containing the
equivalent Java time format strings.
Two issues are resolved:
1. The `value_type` should be either long or double in case of numeric.
2. The key label for the aggregate filter (having) was duplicate of an aggr key label.
Fixes: #33520
* Changed the format of the String functions documentation page.
* Adopted the same format for Math functions, but completely changed the examples.
* Added missing documentation for Math functions.
Jason Tedor
markharwood
Alexander Reelsen
Martijn van Groningen
Daniel Mitterdorfer
Jay Modi
Chris Roberson
Armin Braun
Nhat Nguyen
Tim Vernum
David Roberts
David Turner
Andrei Stefan
Nik Everett
Nathan Delhaye
Dimitris Athanasiou
David Kyle
Albert Zaharovits
Ed Savage
Ioannis Kakavas
Yogesh Gaikwad
Kazuhiro Sera
Jim Ferenczi
jaymode
Marios Trivyzas
Benjamin Trent
Shaunak Kashyap
Ryan Ernst
Hendrik Muhs
Costin Leau
Lisa Cawley
Christoph Büscher
Shivaank121