Cross-cluster search selects a subset of nodes for each remote cluster
and sends requests only to them, which will act as a proxy and properly
redirect such requests to the target nodes that hold the relevant data.
What happens today is that every time we send a request to a remote
cluster, it will be sent to the next node in the proxy list
(in round-robin fashion), regardless of whether the target node is
already amongst the ones that we are connected to. In case for instance
we need to send a shard search request to a data node that's also one of
the selected proxy nodes, we may end up sending the request to it
through one of the other proxy nodes.
This commit optimizes this case to make sure that whenever we are
already connected to a remote node, we will send a direct request rather
than using the next proxy node.
There is a side-effect to this, which is that round-robin will be a bit
unbalanced as the data nodes that are also selected as proxies will
receive more requests.
We have some use cases for an index setting to only be manageable by
dedicated APIs rather than be updateable via the update settings
API. This commit adds the notion of an internal index setting. Such
settings can be set on create index requests, they can not be changed
via the update settings API, yet they can be changed by action on behalf
of or triggered by the user via dedicated APIs.
With #29331 we added support for the cluster health API to the
high-level REST client. The transport client does not support the level
parameter, and it always returns all the info needed for shards level
rendering. We have maintained that behaviour when adding support for
cluster health to the high-level REST client, to ease migration, but the
correct thing to do is to default the high-level REST client to
`cluster` level, which is the same default as when going through the
Elasticsearch REST layer.
If the publishing of a cluster state to a node fails, we currently only log it as debug information and
only on the master. This makes it hard to see the cause of (test) failures when logging is set to
default levels. This PR adds a warn level log on the node receiving the cluster state when it fails to
deserialise the cluster state and a warn level log on the master with a list of nodes for which
publication failed.
Today, if GET /_cluster/health?wait_for_active_shards=all does not immediately
succeed then it throws an exception due to an erroneous and unnecessary call to
ActiveShardCount#enoughShardsActive(). This commit fixes this logic.
Fixes#31151
TransportAction has many variants of execute. One of those variants
executes by returning a future, which is then often blocked on by
calling get(). This commit removes this variant of execute, instead
using a helper method for tests that want to block, or having tests
pass in a PlainActionFuture directly as a listener.
Co-authored-by: Simon Willnauer <simonw@apache.org>
Here is the problem: if two threads are racing and one hits a failure
freeing a context and the other succeeded, we can expose the value of
the has failure marker to the succeeding thread before the failing
thread has had a chance to set the failure marker. This is a problem if
the failing thread counted down the expected number of operations, then
be put to sleep by a gentle lullaby from the OS, and then the other
thread could count down to zero. Since the failing thread did not get to
set the failure marker, the succeeding thread would respond that the
clear scroll succeeded and that makes that thread a liar. This commit
addresses by first setting the failure marker before we potentially
expose its value to another thread.
Given the weirdness of the response returned by the get alias API, we went for a client specific response, which allows us to hold the error message, exception and status returned as part of the response together with aliases. See #30536 .
Relates to #27205
This adds a thread interrupter that allows us to encapsulate calls to org.joni.Matcher#search()
This method can hang forever if the regex expression is too complex.
The thread interrupter in the background checks every 3 seconds whether there are threads
execution the org.joni.Matcher#search() method for longer than 5 seconds and
if so interrupts these threads.
Joni has checks that that for every 30k iterations it checks if the current thread is interrupted and
if so returns org.joni.Matcher#INTERRUPTED
Closes#28731
This filesystem needs to be suppressed during these tests because it
adds random files to the directory upon directory creation. That means
that the size of these directories is off from what we expect them to
be. Rather than loosening the assertion which could hide bugs on real
directories, this commit suppresses this file system in this test suite.
This removes the abstract `getTranslog` method in `Engine`, instead leaving it
to the abstract implementations of the other methods that use the translog. This
allows future Engines not to have a Translog, as instead they must implement the
methods that use the translog pieces to return necessary values.
This test was failing from time to time due to a ConcurrentModificationException, which
was triggered due to the primary-replica resync running concurrently with shards being
removed.
Closes#30767
With `max_concurrent_shard_requests` we used to throttle / limit
the number of concurrent shard requests a high level search request
can execute per node. This had several problems since it limited the
number on a global level based on the number of nodes. This change
now throttles the number of concurrent requests per node while still
allowing concurrency across multiple nodes.
Closes#31192
Previously this was called for the combine script only. This change checks for self references for
init, map, and reduce scripts as well, and adds unit test coverage for the init, map, and combine cases.
* Fully encapsulate LocalCheckpointTracker inside of the engine
This makes the Engine interface not expose the `LocalCheckpointTracker`, instead
exposing the pieces needed (like retrieving the local checkpoint) as individual
methods.
* Remove DocumentFieldMappers#simpleMatchToFullName, as it is duplicative of MapperService#simpleMatchToIndexNames.
* Rename MapperService#simpleMatchToIndexNames -> simpleMatchToFullName for consistency.
* Simplify EsIntegTestCase#assertConcreteMappingsOnAll to accept concrete fields instead of wildcard patterns.
The following analyzers were moved from server module to analysis-common module:
`snowball`, `arabic`, `armenian`, `basque`, `bengali`, `brazilian`, `bulgarian`,
`catalan`, `chinese`, `cjk`, `czech`, `danish`, `dutch`, `english`, `finnish`,
`french`, `galician` and `german`.
Relates to #23658
We moved to 1 shard by default which caused some issues in how many
concurrent shard requests we allow by default. For instance searching
a 5 shard index on a single node will now be executed serially per shard
while we want these cases to have a good concurrency out of the box. This
change moves to `numNodes * 5` which corresponds to the default we used to
have in the previous version.
Relates to #30783Closes#30994
* Initial commit of rest high level exposure of cancel task
* fix javadocs
* address some code review comments
* update branch to use tasks namespace instead of cluster
* High-level client: list tasks failure to not lose nodeId
This commit reworks testing for `ListTasksResponse` so that random
fields insertion can be tested and xcontent equivalence can be checked
too. Proper exclusions need to be configured, and failures need to be
tested separately. This helped finding a little problem, whenever there
is a node failure returned, the nodeId was lost as it was never printed
out as part of the exception toXContent.
* added comment
* merge from master
* re-work CancelTasksResponseTests to separate XContent failure cases from non-failure cases
* remove duplication of logic in parser creation
* code review changes
* refactor TasksClient to support RequestOptions
* add tests for parent task id
* address final PR review comments, mostly formatting and such
This is related to #27260 and #28898. This commit adds the transport-nio
plugin as a random option when running the http smoke tests. As part of
this PR, I identified an issue where cors support was not properly
enabled causing these tests to fail when using transport-nio. This
commit also fixes that issue.
Adds support for `ignore_unmapped` parameter in geo distance sorting,
which is functionally equivalent to specifying an `unmapped_type` in
the field sort.
Closes#28152
Several AcknowledgedResponse implementations only parse the boolean acknowledged
flag and then create an instance of their class using that flag. This can be
simplified by adding this basic parser to the superclass, provide a common
helper method and call the appropriate ctor in the fromXContent methods.
This change moves an integration test that relies on setting
the value of a static variable (boolean max clause count) to
an unit test where we are sure that the same jvm is used to access
the static variable.
By default span_multi query will limit term expansions = boolean max clause.
This will limit high heap usage in case of high cardinality term
expansions. This applies only if top_terms_N is not used in inner multi
query.
This is related to #28898. This commit adds the acceptor thread name to
the method checking if this thread is a transport thread. Additionally,
it modifies the nio http transport to use the same worker name as the
netty4 http server transport.
This is related to #27260. This commit combines the AcceptingSelector
and SocketSelector classes into a single NioSelector. This change
allows the same selector to handle both server and socket channels. This
is valuable as we do not necessarily want a dedicated thread running for
accepting channels.
With this change, this commit removes the configuration for dedicated
accepting selectors for the normal transport class. The accepting
workload for new node connections is likely low, meaning that there is
no need to dedicate a thread to this process.
Currently the engine is initialized with a hardcoded 256MB of RAM. Elasticsearch
may never use more than that for a given shard, `IndexingMemoryController` only
has the power to flush segments to disk earlier in case multiple shards are
actively indexing and use too much memory.
While this amount of memory is enough for an index with few fields and larger
RAM buffers are not expected to improve indexing speed, this might actually be
little for an index that has many fields.
Kudos to @bleskes for finding it out when looking into a user who was reporting
a **much** slower indexing speed when upgrading from 2.x to 5.6 with an index
that has about 20,000 fields.
We currently have a specific REST action to retrieve all indices and types mappings, which used internally the get index API. This doesn't seem to be required anymore though as the existing RestGetMappingAction could as well take the requests with no indices and types specified.
This commit removes the RestGetAllMappingsAction in favour of using RestGetMappingAction also for requests that don't specify indices nor types.
The Index Audit trail allows the override of the template index
settings with settings specified on the conf file.
A bug will manifest when such conf file settings are specified
for templates that need to be upgraded. The bug is an endless
upgrade loop because the upgrade, although successful, is
not reckoned as such by the upgrade service.
Adrien Grand
Luca Cavanna
Igor Motov
Dimitris Athanasiou
Jason Tedor
Boaz Leskes
David Turner
Ryan Ernst
Tanguy Leroux
Martijn van Groningen
Van0SS
olcbean
Nhat Nguyen
Lee Hinman
Yannick Welsch
Simon Willnauer
rationull
Julie Tibshirani
Vladimir Dolzhenko
Paul Sanwald
Tim Brooks
Christoph Büscher
Jim Ferenczi
Nirmal Chidambaram
Jim Ferenczi
Albert Zaharovits