This change adds a new untyped endpoint `{index}/_source/{id}` for both the
GET and the HEAD methods to get the source of a document or check for its
existance. It also adds deprecation warnings to RestGetSourceAction that emit
a warning when the old deprecated "type" parameter is still used. Also updating
documentation and tests where appropriate.
Relates to #35190
This commit updates our transport settings for 7.0. It generally takes a
few approaches. First, for normal transport settings, it usestransport.
instead of transport.tcp. Second, it uses transport.tcp, http.tcp,
or network.tcp for all settings that are proxies for OS level socket
settings. Third, it marks the network.tcp.connect_timeout setting for
removal. Network service level settings are only settings that apply to
both the http and transport modules. There is no connect timeout in
http. Fourth, it moves all the transport settings to a single class
TransportSettings similar to the HttpTransportSettings class.
This commit does not actually remove any settings. It just adds the new
renamed settings and adds todos for settings that will be deprecated.
`PageCacheRecycler` is the class that creates and holds pages of arrays
for various uses. `BigArrays` is just one user of these pages. This
commit moves the constants that define the page sizes for the recycler
to be on the recycler class.
Currently our handshake requests do not include a version. This is
unfortunate as we cannot rely on the stream version since it is not the
sending node's version. Instead it is the minimum compatibility version.
The handshake request is currently empty and we do nothing with it. This
should allow us to add data to the request without breaking backwards
compatibility.
This commit adds the version to the handshake request. Additionally, it
allows "future data" to be added to the request. This allows nodes to craft
a version compatible response. And will properly handle additional data in
future handshake requests. The proper handling of "future data" is useful
as this is the only request where we do not know the other node's version.
Finally, it renames the TcpTransportHandshaker to
TransportHandshaker.
This commit modifies BigArrays to take a circuit breaker name and
the circuit breaking service. The default instance of BigArrays that
is passed around everywhere always uses the request breaker. At the
network level, we want to be using the inflight request breaker. So this
change will allow that.
Additionally, as this change moves away from a single instance of
BigArrays, the class is modified to not be a Releasable anymore.
Releasing big arrays was always dispatching to the PageCacheRecycler,
so this change makes the PageCacheRecycler the class that needs to be
managed and torn-down.
Finally, this commit closes#31435 be making the serialization of
transport messages use the inflight request breaker. With this change,
we no longer push the global BigArrays instnace to the network level.
By default gateway.recover_after_master_nodes is set to
discovery.zen.minimum_master_nodes but in this Zen2 test this is set to an
unreasonably large value. This change updates it so the cluster can properly
form.
Today, we allow all nodes in an integration test to bootstrap. However this
seems to lead to test failures due to post-election instability. The change
avoids this instability by only bootstrapping a single node in the cluster.
This commit upgrades netty. This will close#35360. Netty started
throwing an IllegalArgumentException if a CompositeByteBuf is
created with < 2 components. Netty4Utils was updated to reflect this
change.
This is related to #34405 and a follow-up to #34753. It makes a number
of changes to our current keepalive pings.
The ping interval configuration is moved to the ConnectionProfile.
The server channel now responds to pings. This makes the keepalive
pings bidirectional.
On the client-side, the pings can now be optimized away. What this
means is that if the channel has received a message or sent a message
since the last pinging round, the ping is not sent for this round.
* [Zen2] Implement Tombstone REST APIs
* Adds REST API for withdrawing votes and clearing vote withdrawls
* Tests added to Netty4 module since we need a real Network impl. for Http endpoints
This commit removes the dedicated `setSoLinger` method. This simplifies
the `TcpChannel` interface. This method has very little effect as the
SO_LINGER is not set prior to the channels being closed in the abstract
transport test case. We still will set SO_LINGER on the
`MockNioTransport`. However we can do this manually.
This pull request makes the `RestGetSourceAction` return a `ResourceNotFoundException` with a proper JSON response when source or document itself is missing (see issue #33384).
Here is below a sample JSON output:
```
{
"error": {
"root_cause": [
{
"type": "resource_not_found_exception",
"reason": "Source not found [index1]/[_doc]/[1]"
}
],
"type": "resource_not_found_exception",
"reason": "Source not found [index1]/[_doc]/[1]"
},
"status": 404
}
```
This is related to #34483. It introduces a namespaced setting for
compression that allows users to configure compression on a per remote
cluster basis. The transport.tcp.compress remains as a fallback
setting. If transport.tcp.compress is set to true, then all requests
and responses are compressed. If it is set to false, only requests to
clusters based on the cluster.remote.cluster_name.transport.compress
setting are compressed. However, after this change regardless of any
local settings, responses will be compressed if the request that is
received was compressed.
This is related to #29023. Additionally at other points we have
discussed a preference for removing the need to unnecessarily block
threads for opening new node connections. This commit lays the groudwork
for this by opening connections asynchronously at the transport level.
We still block, however, this work will make it possible to eventually
remove all blocking on new connections out of the TransportService
and Transport.
Currently we create a new netty event loop group for client connections
and all server profiles. Each new group creates new threads for io
processing. This means 2 * num of processors new threads for each group.
A single group should be able to handle all io processing (for the
transports). This also brings the netty module inline with what we do
for nio.
Additionally, this PR renames the worker threads to be the same for
netty and nio.
With this commit we differentiate between permanent circuit breaking
exceptions (which require intervention from an operator and should not
be automatically retried) and transient ones (which may heal themselves
eventually and should be retried). Furthermore, the parent circuit
breaker will categorize a circuit breaking exception as either transient
or permanent based on the categorization of memory usage of its child
circuit breakers.
Closes#31986
Relates #34460
In order to remove Streamable from the codebase, Response objects need
to be read using the Writeable.Reader interface which this change
enables. This change enables the use of Writeable.Reader by adding the
`Action#getResponseReader` method. The default implementation simply
uses the existing `newResponse` method and the readFrom method. As
responses are migrated to the Writeable.Reader interface, Action
classes can be updated to throw an UnsupportedOperationException when
`newResponse` is called and override the `getResponseReader` method.
Relates #34389
This is related to #30876. The AbstractSimpleTransportTestCase initiates
many tcp connections. There are normally over 1,000 connections in
TIME_WAIT at the end of the test. This is because every test opens at
least two different transports that connect to each other with 13
channel connection profiles. This commit modifies the default
connection profile used by this test to 6. One connection for each
type, except for REG which gets 2 connections.
The contains syntax was added in #30874 but the skips were not properly
put in place.
The java runner has the feature so the tests will run as part of the
build, but language clients will be able to support it at their own
pace.
Currently a bad regex in CORS settings throws a PatternSyntaxException, which
then bubbles up through the bootstrap code, meaning users have to parse a
stack trace to work out where the problem is. We should instead catch this
exception and rethrow with a more useful error message.
This commit introduces an AbstractSimpleSecurityTransportTestCase for
security transports. This classes provides transport tests that are
specific for security transports. Additionally, it fixes the tests referenced in
#33285.
Historically we have had a ESLoggingHandler in the netty module that
logs low-level connection operations. This class just extends the netty
logging handler with some (broken) message deserialization. This commit
fixes this message serialization and moves the class to server.
This new logger logs inbound and outbound messages. Eventually, we
should move other event logging to this class (connect, close, flush).
That way we will have consistent logging regards of which transport is
loaded.
Resolves#27306 on master. Older branches will need a different fix.
This commit is related to #32517. It allows an "server_name"
attribute on a DiscoveryNode to be propagated to the server using
the TLS SNI extentsion. This functionality is only implemented for
the netty security transport.
- third party audit detects jar hell with JDK so we disable it
- jdk non portable in forbiddenapis detects classes being used from the
JDK ( for fips ) that are not portable, this is intended so we don't
scan for it on fips.
- different exclusion rules for third party audit on fips
Closes#33179
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. In a
long series of PRs I've changed all of the old style requests that I
could find with `grep`. In this PR I change all requests that I could
find by *removing* the deprecated methods. Since this is a non-trivial
change I do not include actually removing the deprecated requests. I'll
do that in a follow up. But this should be the last set of usage
removals before the actual deprecated method removal. Yay!
In our Netty layer we have had to take extra precautions against Netty
catching throwables which prevents them from reaching the uncaught
exception handler. This code has taken on additional uses in NIO layer
and now in the scheduler engine because there are other components in
stack traces that could catch throwables and suppress them from reaching
the uncaught exception handler. This commit is a simple cleanup of the
iterative evolution of this code to refactor all uses into a single
method in ExceptionsHelper.
This is related to #32517. This commit passes the DiscoveryNode to the
initiateChannel method for different Transport implementation. This
will allow additional attributes (besides just the socket address) to be
used when opening channels.
This is a followup to #31886. After that commit the
TransportConnectionListener had to be propogated to both the
Transport and the ConnectionManager. This commit moves that listener
to completely live in the ConnectionManager. The request and response
related methods are moved to a TransportMessageListener. That listener
continues to live in the Transport class.
This is related to #31835. It moves the default connection profile into
the ConnectionManager class. The will allow us to have different
connection managers with different profiles.
This is related to #31835. This commit adds a connection manager that
manages client connections to other nodes. This means that the
TcpTransport no longer maintains a map of nodes that it is connected
to.
* Upgrade to `4.1.28` since the problem reported in #32487 is a bug in Netty itself (see https://github.com/netty/netty/issues/7337)
* Fixed other leaks in test code that now showed up due to fixes improvements in leak reporting in the newer version
* Needed to extend permissions for netty common package because it now sets a classloader at runtime after changes in 63bae0956a
* Adjusted forbidden APIs check accordingly
* Closes#32487
There are two scenarios where a http request could terminate in the cors
handler. If that occurs, the requests need to be released. This commit
releases those requests.
* Test `handler` must release buffer the same way the replaced `org.elasticsearch.http.netty4.Netty4HttpRequestHandler#channelRead0` releases it
* Closes#32289
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes most of the calls not in X-Pack to their new versions.
This is related to #27260. It adds the SecurityNioHttpServerTransport
to the security plugin. It randomly uses the nio http transport in
security integration tests.
Today TransportService is tightly coupled with Transport since it
requires an instance of TransportService in order to receive responses
and send requests. This is mainly due to the Request and Response handlers
being maintained in TransportService but also because of the lack of a proper
callback interface.
This change moves request handler registry and response handler registration into
Transport and adds all necessary methods to `TransportConnectionListener` in order
to remove the `TransportService` dependency from `Transport`
Transport now accepts one or more `TransportConnectionListener` instances that are
executed sequentially in a blocking fashion.
* remove left-over comment
* make sure of the property for plugins
* skip installing modules if these exist in the distribution
* Log the distrbution being ran
* Don't allow running with integ-tests-zip passed externally
* top level x-pack/qa can't run with oss distro
* Add support for matching objects in lists
Makes it possible to have a key that points to a list and assert that a
certain object is present in the list. All keys have to be present and
values have to match. The objects in the source list may have additional
fields.
example:
```
match: { 'nodes.$master.plugins': { name: ingest-attachment } }
```
* Update plugin and module tests to work with other distributions
Some of the tests expected that the integration tests will always be ran
with the `integ-test-zip` distribution so that there will be no other
plugins loaded.
With this change, we check for the presence of the plugin without
assuming exclusivity.
* Allow modules to run on other distros as well
To match the behavior of tets.distributions
* Add and use a new `contains` assertion
Replaces the previus changes that caused `match` to do a partial match.
* Implement PR review comments
TransportRequestHandler currently contains 2 messageReceived methods,
one which takes a Task, and one that does not. The first just delegates
to the second. This commit changes all existing implementors of
TransportRequestHandler to implement the version which takes Task, thus
allowing the class to be a functional interface, and eliminating the
need to throw exceptions when a task needs to be ensured.
Historically in TcpTransport server channels were represented by the
same channel interface as socket channels. This was necessary as
TcpTransport was parameterized by the channel type. This commit
introduces TcpServerChannel and HttpServerChannel classes. Additionally,
it adds the implementations for the various transports. This allows
server channels to have unique functionality and not implement the
methods they do not support (such as send and getRemoteAddress).
Additionally, with the introduction of HttpServerChannel this commit
extracts some of the storing and closing channel work to the abstract
http server transport.
This is a general cleanup of channels and exception handling in http.
This commit introduces a CloseableChannel that is a superclass of
TcpChannel and HttpChannel. This allows us to unify the closing logic
between tcp and http transports. Additionally, the normal http channels
are extracted to the abstract server transport.
Finally, this commit (mostly) unifies the exception handling between nio
and netty4 http server transports.
This is related to #28898. This PR implements pooling of bytes arrays
when reading from the wire in the http server transport. In order to do
this, we must integrate with netty reference counting. That manner in
which this PR implements this is making Pages in InboundChannelBuffer
reference counted. When we accessing the underlying page to pass to
netty, we retain the page. When netty releases its bytebuf, it releases
the underlying pages we have passed to it.
Currently we maintain a compatibility map of http status codes in both
the netty4 and nio modules. These maps convert a RestStatus to a netty
HttpResponseStatus. However, as these fundamentally represent integers,
we can just use the netty valueOf method to convert a RestStatus to a
HttpResponseStatus.
This is related to #28898. With the addition of the http nio transport,
we now have two different modules that provide http transports.
Currently most of the http logic lives at the module level. However,
some of this logic can live in server. In particular, some of the
setting of headers, cors, and pipelining. This commit begins this moving
in that direction by introducing lower level abstraction (HttpChannel,
HttpRequest, and HttpResonse) that is implemented by the modules. The
higher level rest request and rest channel work can live entirely in
server.
Currently the http pipelining handlers seem to support chunked http
content. However, this does not make sense. There is a content
aggregator in the pipeline before the pipelining handler. This means the
pipelining handler should only see full http messages. Additionally, the
request handler immediately after the pipelining handler only supports
full messages.
This commit modifies both nio and netty4 pipelining handlers to assert
that an inbound message is a full http message. Additionally it removes
the tests for chunked content.
This commit upgrades us to Netty 4.1.25. This upgrade is more
challenging than past upgrades, all because of a new object cleaner
thread that they have added. This thread requires an additional security
permission (set context class loader, needed to avoid leaks in certain
scenarios). Additionally, there is not a clean way to shutdown this
thread which means that the thread can fail thread leak control during
tests. As such, we have to filter this thread from thread leak control.
This is related to #27260 and #28898. This commit adds the transport-nio
plugin as a random option when running the http smoke tests. As part of
this PR, I identified an issue where cors support was not properly
enabled causing these tests to fail when using transport-nio. This
commit also fixes that issue.
This is related to #28898. This commit adds cors support to the nio http
transport. Most of the work is copied directly from the netty module
implementation. Additionally, this commit adds tests for the nio http
channel.
This is related to #31017. That issue identified that these three http
methods were treated like GET requests. This commit adds them to
RestRequest. This means that these methods will be handled properly and
generate 405s.
This commit introduces the ability for a client to communicate to the
server features that it can support and for these features to be used in
influencing the decisions that the server makes when communicating with
the client. To this end we carry the features from the client to the
underlying stream as we carry the version of the client today. This
enables us to enhance the logic where we make protocol decisions on the
basis of the version on the stream to also make protocol decisions on
the basis of the features on the stream. With such functionality, the
client can communicate to the server if it is a transport client, or if
it has, for example, X-Pack installed. This enables us to support
rolling upgrades from the OSS distribution to the default distribution
without breaking client connectivity as we can now elect to serialize
customs in the cluster state depending on whether or not the client
reports to us using the feature capabilities that it can under these
customs. This means that we would avoid sending a client pieces of the
cluster state that it can not understand. However, we want to take care
and always send the full cluster state during node-to-node communication
as otherwise we would end up with different understanding of what is in
the cluster state across nodes depending on which features they reported
to have. This is why when deciding whether or not to write out a custom
we always send the custom if the client is not a transport client and
otherwise do not send the custom if the client is transport client that
does not report to have the feature required by the custom.
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Currently AbstractHttpServerTransport is in a netty4 module. This is the
incorrect location. This commit moves it out of netty4 module.
Additionally, it moves unit tests that test AbstractHttpServerTransport
logic to server.
Currently nio and netty modules use the CompletableFuture class for
managing listeners. This is unfortunate as that class accepts
Throwable. This commit adds a class CompletableContext that wraps
the CompletableFuture but does not accept Throwable. This allows the
modification of netty and nio logic to no longer handle Throwable.
This commit reintroduces 31251c9 and 63a5799. These commits introduced a
memory leak and were reverted. This commit brings those commits back
and fixes the memory leak by removing unnecessary retain method calls.
This reverts commit 31251c9 introduced in #30695.
We suspect this commit is causing the OOME's reported in #30811 and we will use this PR to test this assertion.
This is related to #29500 and #28898. This commit removes the abilitiy
to disable http pipelining. After this commit, any elasticsearch node
will support pipelined requests from a client. Additionally, it extracts
some of the http pipelining work to the server module. This extracted
work is used to implement pipelining for the nio plugin.
This commit is related to #28898. It adds an nio driven http server
transport. Currently it only supports basic http features. Cors,
pipeling, and read timeouts will need to be added in future PRs.
With this commit we determine the maximum number of buffers that Netty keeps
while accumulating one HTTP request based on the maximum content length (default
1500 bytes, overridable with the system property `es.net.mtu`). Previously, we
kept the default value of 1024 which is too small for bulk requests which leads
to unnecessary copies of byte buffers internally.
Relates #29448
This commit removes the http.enabled setting. While all real nodes (started with bin/elasticsearch) will always have an http binding, there are many tests that rely on the quickness of not actually needing to bind to 2 ports. For this case, the MockHttpTransport.TestPlugin provides a dummy http transport implementation which is used by default in ESIntegTestCase.
closes#12792
I am not sure why we have this leniency for HTTP max content length, it
has been there since the beginning
(5ac51ee93f) with no explanation of its
source. That said, our philosophy today is different than the philosophy
of the past where Elasticsearch would be quite lenient in its handling
of settings and today we aim for predictability for both users and
us. This commit removes leniency in the parsing of
http.max_content_length.
We use a latch when sending requests during tests so that we do not hang
forever waiting for replies on those requests. This commit increases the
timeout on that latch to 30 seconds because sometimes 10 seconds is just
not enough.
Today we have a few problems with how we handle bad requests:
- handling requests with bad encoding
- handling requests with invalid value for filter_path/pretty/human
- handling requests with a garbage Content-Type header
There are two problems:
- in every case, we give an empty response to the client
- in most cases, we leak the byte buffer backing the request!
These problems are caused by a broader problem: poor handling preparing
the request for handling, or the channel to write to when the response
is ready. This commit addresses these issues by taking a unified
approach to all of them that ensures that:
- we respond to the client with the exception that blew us up
- we do not leak the byte buffer backing the request
* Decouple XContentBuilder from BytesReference
This commit removes all mentions of `BytesReference` from `XContentBuilder`.
This is needed so that we can completely decouple the XContent code and move it
into its own dependency.
While this change appears large, it is due to two main changes, moving
`.bytes()` and `.string()` out of XContentBuilder itself into static methods
`BytesReference.bytes` and `Strings.toString` respectively. The rest of the
change is code reacting to these changes (the majority of it in tests).
Relates to #28504
* Remove log4j dependency from elasticsearch-core
This removes the log4j dependency from our elasticsearch-core project. It was
originally necessary only for our jar classpath checking. It is now replaced by
a `Consumer<String>` so that the es-core dependency doesn't have external
dependencies.
The parts of #28191 which were moved in conjunction (like `ESLoggerFactory` and
`Loggers`) have been moved back where appropriate, since they are not required
in the core jar.
This is tangentially related to #28504
* Add javadocs for `output` parameter
* Change @code to @link
We have code used in the networking layer to search for errors buried in
other exceptions. This code will be useful in other locations so with
this commit we move it to our exceptions helpers.
Relates #28691
The is a follow up to #28567 changing the method used to capture stack traces, as requested
during the review. Instead of creating a throwable, we explicitly capture the stack trace of the
current thread. This should Make Jason Happy Again ™️ .
This commit updates netty to 4.1.16.Final. This is the latest version that we can have work without
extra permissions. This updated version of netty fixes issues seen with Java 9 and some data
not being sent, which results in timeouts.
The method `initiateChannel` on `TcpTransport` is explicit in that
channels can be connect asynchronously. All production implementations
do connect asynchronously. Only the blocking `MockTcpTransport`
connects in a synchronous manner. This avoids testing some of the
blocking code in `TcpTransport` that waits on connections to complete.
Additionally, it requires a more extensive method signature than
required for other transports.
This commit modifies the `MockTcpTransport` to make these connections
asynchronously on a different thread. Additionally, it simplifies that
`initiateChannel` method signature.
This is related to #27933. It introduces a jar named elasticsearch-core
in the lib directory. This commit moves the JarHell class from server to
elasticsearch-core. Additionally, PathUtils and some of Loggers are
moved as JarHell depends on them.
This is related to #27260. This commit moves the NioTransport from
:test:framework to a new nio-transport plugin. Additionally, supporting
tcp decoding classes are moved to this plugin. Generic byte reading and
writing contexts are moved to the nio library.
Additionally, this commit adds a basic MockNioTransport to
:test:framework that is a TcpTransport implementation for testing that
is driven by nio.
This commit attempts to continue unifying the logic between different
transport implementations. As transports call a `TcpTransport` callback
when a new channel is accepted, there is no need to internally track
channels accepted. Instead there is a set of accepted channels in
`TcpTransport`. This set is used for metrics and shutting down channels.
This is related to #27563. This commit modifies the
InboundChannelBuffer to support releasable byte pages. These byte
pages are provided by the PageCacheRecycler. The PageCacheRecycler
must be passed to the Transport with this change.
We currently do not have any server-side read timeouts implemented in
elasticsearch. This commit adds a read timeout setting that defaults to
30 seconds. If after 30 seconds a read has not occurred, the channel
will be closed. A timeout of value of 0 will disable the timeout.
This is related to #27422. Right now when we send a write to the netty
transport, we attach a listener to the future. When you submit a write
on the netty event loop and the event loop is shutdown, the onFailure
method is called. Unfortunately, netty then tries to notify the listener
which cannot be done without dispatching to the event loop. In this
case, the dispatch fails and netty logs and error and does not tell us.
This commit checks that netty is still not shutdown after sending a
message. If netty is shutdown, we complete the listener.
Currently we use ActionListener<TcpChannel> for connect, close, and send
message listeners in TcpTransport. However, all of the listeners have to
capture a reference to a channel in the case of the exception api being
called. This commit changes these listeners to be type <Void> as passing
the channel to onResponse is not necessary. Additionally, this change
makes it easier to integrate with low level transports (which use
different implementations of TcpChannel).
This commit is a follow up to the work completed in #27132. Essentially
it transitions two more methods (sendMessage and getLocalAddress) from
Transport to TcpChannel. With this change, there is no longer a need for
TcpTransport to be aware of the specific type of channel a transport
returns. So that class is no longer parameterized by channel type.
Right now our different transport implementations must duplicate
functionality in order to stay compliant with the requirements of
TcpTransport. They must all implement common logic to open channels,
close channels, keep track of channels for eventual shutdown, etc.
Additionally, there is a weird and complicated relationship between
Transport and TransportService. We eventually want to start merging
some of the functionality between these classes.
This commit starts moving towards a world where TransportService retains
all the application logic and channel state. Transport implementations
in this world will only be tasked with returning a channel when one is
requested, calling transport service when a channel is accepted from
a server, and starting / stopping itself.
Specifically this commit changes how channels are opened and closed. All
Transport implementations now return a channel type that must comply with
the new TcpChannel interface. This interface has the methods necessary
for TcpTransport to completely manage the lifecycle of a channel. This
includes setting the channel up, waiting for connection, adding close
listeners, and eventually closing.
This is a followup to #26521. This commit expands the alias added for
the elasticsearch client codebase to all codebases. The original full
jar name property is left intact. This only adds an alias without the
version, which should help ease the pain in updating any versions (ES
itself or dependencies).
If creating the REST request throws an exception (for example, because
of invalid headers), we leak the request due to failure to release the
buffer (which would otherwise happen after replying on the
channel). This commit addresses this leak by handling the failure case.
Relates #27222
This commit removes the `ByteBufStreamInput` `readBytesReference` and
`readBytesRef` methods. These methods are zero-copy which means that
they retain a reference to the underlying netty buffer. The problem is
that our `TcpTransport` is not designed to handle zero-copy. The netty
implementation sets the read index past the current message once it has
been deserialized, handled, and mostly likely dispatched to another
thread. This means that netty is free to release this buffer. So it is
unsafe to retain a reference to it without calling `retain`. And we
cannot call `retain` because we are not currently designed to handle
reference counting past the transport level.
This should not currently impact us as we wrap the `ByteBufStreamInput`
in `NamedWriteableAwareStreamInput` in the `TcpTransport`. This stream
essentially delegates to the underling stream. However, in the case of
`readBytesReference` and `readBytesRef` it leaves thw implementations
to the standard `StreamInput` methods. These methods call the read byte
array method which delegates to `ByteBufStreamInput`. The read byte
array method on `ByteBufStreamInput` copies so it is safe. The only
impact of this commit should be removing methods that could be dangerous
if they were eventually called due to some refactoring.
Right now we are attempting to set SO_LINGER to 0 on server channels
when we are stopping the tcp transport. This is not a supported socket
option and throws an exception. This also prevents the channels from
being closed.
This commit 1. doesn't set SO_LINGER for server channges, 2. checks
that it is a supported option in nio, and 3. changes the log message
to warn for server channel close exceptions.
While opening a connection to a node, a channel can subsequently
close. If this happens, a future callback whose purpose is to close all
other channels and disconnect from the node will fire. However, this
future will not be ready to close all the channels because the
connection will not be exposed to the future callback yet. Since this
callback is run once, we will never try to disconnect from this node
again and we will be left with a closed channel. This commit adds a
check that all channels are open before exposing the channel and throws
a general connection exception. In this case, the usual connection retry
logic will take over.
Relates #26932
With this commit we simplify our network layer by only allowing to define a
fixed receive predictor size instead of a minimum and maximum value. This also
means that the following (previously undocumented) settings are removed:
* http.netty.receive_predictor_min
* http.netty.receive_predictor_max
Using an adaptive sizing policy in the receive predictor is a very low-level
optimization. The implications on allocation behavior are extremely hard to grasp
(see our previous work in #23185) and adaptive sizing does not provide a lot of
benefits (see benchmarks in #26165 for more details).
* Add additional low-level logging handler
We have the trace handler which is useful for recording sent messages
but there are times where it would be useful to have more low-level
logging about the events occurring on a channel. This commit adds a
logging handler that can be enabled by setting a certain log level
(org.elasticsearch.transport.netty4.ESLoggingHandler) to trace that
provides trace logging on low-level channel events and includes some
information about the request/response read/write events on the channel
as well.
* Remove imports
* License header
* Remove redundant
* Add test
* More assertions
We should unwrap the cause looking for any suppressed errors or root
causes that are errors when checking if we should maybe die. This commit
causes that to be the case.
Relates #26884
This commit changes the log level on a write and flush failure to warn
as this is not necessarily an Elasticsearch problem but more likely
indicative of an infrastructure problem.
This commit fixes a #26855. Right now we set SO_LINGER to 0 if we are
stopping the transport. This can throw a ChannelClosedException if the
raw channel is already closed. We have a number of scenarios where it is
possible this could be called with a channel that is already closed.
This commit fixes the issue be checking that the channel is not closed
before attempting to set the socket option.
This commit reorders a maybe die check and a logging statement for the
following reasons:
- we should die as quickly as possible if the cause is fatal
- we do not want the JVM to be so broken that when we try to log
another exception is thrown (maybe another out of memory exception)
and then the maybe die is never invoked
- maybe die will log the cause anyway if the cause is fatal so we only
need to log if the cause is not fatal
At current, we do not feel there is enough of a reason to shade the low
level rest client. It caused problems with commons logging and IDE's
during the brief time it was used. We did not know exactly how many
users will need this, and decided that leaving shading out until we
gather more information is best. Users can still shade the jar
themselves. For information and feeback, see issue #26366.
Closes#26328
This reverts commit 3a20922046.
This reverts commit 2c271f0f22.
This reverts commit 9d10dbea39.
This reverts commit e816ef89a2.
There is a group of five settings relating to raw tcp configurations
(no_delay, buffer sizes, etc) that we have for the http transport. These
currently live in the netty module. As they are unrelated to netty
specifically, this commit moves these settings to the
`HttpTransportSettings` class in core.
Right now it is possible for the `HttpPipeliningHandler` to queue
pipelined responses. On channel close, we do not clear and release these
responses. This commit releases the responses and completes the promise.
With this commit we remove the following three previously unused
(and undocumented) Netty 4 related settings:
* transport.netty.max_cumulation_buffer_capacity,
* transport.netty.max_composite_buffer_components and
* http.netty.max_cumulation_buffer_capacity
from Elasticsearch.
This commit fixes an issue with the Netty 4 multi-port test that a
transport client can connect. The problem here is that in case the
bottom of the random port range was already bound to (for example, by
another JVM) then then transport client could not connect to the data
node. This is because the transport client was in fact using the bottom
of the port range only. Instead, we simply try all the ports that the
data node might be bound to.
Closes#24441
This commit removes all external dependencies from the rest client jar
and shades them in an 'org.elasticsearch.client' package within the jar
using shadowJar gradle plugin. All projects that depended on the
existing jar have been converted to using the 'org.elasticsearch.client'
package prefixes to interact with the rest client.
Closes#25208
There is a bug when a call to `BytesReferenceStreamInput` skip is made
on a `BytesReference` that has an initial offset. The offset for the
current slice is added to the current index and then subtracted from the
length. This introduces the possibility of a negative number of bytes to
skip. This happens inside a loop, which leads to an infinte loop.
This commit correctly subtracts the current slice index from the
slice.length. Additionally, the `BytesArrayTests` are modified to test
instances that include an offset.
Currently when we close a channel in Netty4Utils.closeChannels we
block until the closing is complete. This introduces the possibility
that a network selector thread will block while waiting until a
separate network selector thread closes a channel.
For instance: T1 closes channel 1 (which is assigned to a T1 selector).
Channel 1's close listener executes the closing of the node. That
means that T1 now tries to close channel 2. However, channel 2 is
assigned to a selector that is running on T2. T1 now must wait until T2
closes that channel at some point in the future.
This commit addresses this by adding a boolean to closeChannels
indicating if we should block on close. We only set this boolean to true
if we are closing down the server channels at shutdown. This call is
never made from a network thread. When we call the closeChannels method
with that boolean set to false, we do not block on close.
Transport profiles unfortunately have never been validated. Yet, it's very
easy to make a mistake when configuring profiles which will most likely stay
undetected since we don't validate the settings but allow almost everything
based on the wildcard in `transport.profiles.*`. This change removes the
settings subset based parsing of profiles but rather uses concrete affix settings
for the profiles which makes it easier to fall back to higher level settings since
the fallback settings are present when the profile setting is parsed. Previously, it was
unclear in the code which setting is used ie. if the profiles settings (with removed
prefixes) or the global node setting. There is no distinction anymore since we don't pull
prefix based settings.
This commit makes the use of the global network settings explicit instead
of implicit within NetworkService. It cleans up several places where we fall
back to the global settings while we should have used tcp or http ones.
In addition this change also removes unnecessary settings classes
These settings have not be working for a full major version since they
are not registered. Given that they are simply duplicates we can just remove
them.
Today TcpTransport is the de-facto base-class for transport implementations.
The need for all the callbacks we have in TransportServiceAdaptor are not necessary
anymore since we can simply have the logic inside the base class itself. This change
moves the stats metrics directly into TcpTransport removing the need for low level
bytes send / received callbacks.
We use assertBusy in many places where the underlying code throw exceptions. Currently we need to wrap those exceptions in a RuntimeException which is ugly.
Today if a channel gets closed due to a disconnect we notify the response
handler that the connection is closed and the node is disconnected. Unfortunately
this is not a complete solution since it only works for published connections.
Connections that are unpublished ie. for discovery can indefinitely hang since we
never invoke their handers when we get a failure while a user is waiting for
the response. This change adds connection tracking to TcpTransport that ensures
we are notifying the corresponding connection if there is a failure on a channel.
Get mappings HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for get
mappings HEAD requests, and just relying on the general mechanism that
exists for handling HEAD requests in the REST layer.
Relates #23192
Today when an exception is thrown handling a HEAD request, the body is
swallowed before the channel has a chance to see it. Yet, the channel is
where we compute the content length that would be returned as a header
in the response. This is a violation of the HTTP specification. This
commit addresses the issue. To address this issue, we remove the special
handling in bytes rest response for HEAD requests when an exception is
thrown. Instead, we let the upstream channel handle the special case, as
we already do today for the non-exceptional case.
Relates #25172
Previously the HEAD and GET aliases endpoints were misaigned in
behavior. The HEAD verb would 404 if any aliases are missing while the
GET verb would not if any aliases existed. When HEAD was aligned with
GET, this broke the previous usage of HEAD to serve as an existence
check for aliases. It is the behavior of GET that is problematic here
though, if any alias is missing the request should 404. This commit
addresses this by modifying the behavior of GET to behave in this
way. This fixes the behavior for HEAD to also 404 when aliases are
missing.
Relates #25043
Shared settings were added intially to allow the few common settings
names across aws plugins. However, in 6.0 these settings have been
removed. The last use was in netty, but since 6.0 also has the netty 3
modules removed, there is no longer a need for the shared property. This
commit removes the shared setting property.
This commit renames all rest test files to use the .yml extension
instead of .yaml. This way the extension used within all of
elasticsearch for yaml is consistent.
Netty removed a logging guarded we added to prevent a scary logging
message. We added a hack to work around this. They've added the guard
back, so we can remove the hack now.
Today we prune transport handlers in TransportService when a node is disconnected.
This can cause connections to starve in the TransportService if the connection is
opened as a short living connection ie. without sharing the connection to a node
via registering in the transport itself. This change now moves to pruning based
on the connections cache key to ensure we notify handlers as soon as the connection
is closed for all connections not just for registered connections.
Relates to #24632
Relates to #24575
Relates to #24557
In pre-release versions of Elasticsearch 5.0.0, users were subject to
log messages of the form "your platform does not.*reliably.*potential
system instability". This is because we disable Netty from being unsafe,
and Netty throws up this scary info-level message when unsafe is
unavailable, even if it was unavailable because the user requested that
it be unavailabe. Users were rightly confused, and concerned. So, we
contributed a guard to Netty to prevent this log message from showing up
when unsafe was explicitly disabled. This guard shipped with all
versions of Netty that shipped starting with Elasticsearch
5.0.0. Unfortunately, this guard was lost in an unrelated refactoring
and now with the 4.1.10.Final upgrade, users will again see this
message. This commit is a hack around this until we can get a fix
upstream again.
Relates #24469
Netty uses the number of processors for sizing various resources (e.g.,
thread pools, buffer pools, etc.). However, it uses the runtime number
of available processors which might not match the configured number of
processors as set in Elasticsearch to limit the number of threads (for
example, in Docker containers). A new feature was added to Netty that
enables configuring the number of processors Netty should see for sizing
this various resources. This commit takes advantage of this feature to
set this number of available processors to be equal to the configured
number of processors set in Elasticsearch.
Relates #24420
It looks like auto-complete gave us a nasty surprise here with
Logger#equals being invoked instead of Logger#error swallowing the
absolute worst-possible level of a log message. This commit fixes the
invocation.
This change simplifies how the rest test runner finds test files and
removes all leniency. Previously multiple prefixes and suffixes would
be tried, and tests could exist inside or outside of the classpath,
although outside of the classpath never quite worked. Now only classpath
tests are supported, and only one resource prefix is supported,
`/rest-api-spec/tests`.
closes#20240
This commit makes closing a ReleasableBytesStreamOutput release the underlying BigArray so
that we can use try-with-resources with these streams and avoid leaking memory by not returning
the BigArray. As part of this change, the ReleasableBytesStreamOutput adds protection to only
release the BigArray once.
In order to make some of the changes cleaner, the ReleasableBytesStream interface has been
removed. The BytesStream interface is changed to a abstract class so that we can use it as a
useable return type for a new method, Streams#flushOnCloseStream. This new method wraps a
given stream and overrides the close method so that the stream is simply flushed and not closed.
This behavior is used in the TcpTransport when compression is used with a
ReleasableBytesStreamOutput as we need to close the compressed stream to ensure all of the data
is written from this stream. Closing the compressed stream will try to close the underlying stream
but we only want to flush so that all of the written bytes are available.
Additionally, an error message method added in the BytesRestResponse did not use a builder
provided by the channel and instead created its own JSON builder. This changes that method to use
the channel builder and in turn the bytes stream output that is managed by the channel.
Note, this commit differs from 6bfecdf921 in that it updates
ReleasableBytesStreamOutput to handle the case of the BigArray decreasing in size, which changes
the reference to the BigArray. When the reference is changed, the releasable needs to be updated
otherwise there could be a leak of bytes and corruption of data in unrelated streams.
This reverts commit afd45c1432, which reverted #23572.
This commit makes closing a ReleasableBytesStreamOutput release the underlying BigArray so
that we can use try-with-resources with these streams and avoid leaking memory by not returning
the BigArray. As part of this change, the ReleasableBytesStreamOutput adds protection to only release the BigArray once.
In order to make some of the changes cleaner, the ReleasableBytesStream interface has been
removed. The BytesStream interface is changed to a abstract class so that we can use it as a
useable return type for a new method, Streams#flushOnCloseStream. This new method wraps a
given stream and overrides the close method so that the stream is simply flushed and not closed.
This behavior is used in the TcpTransport when compression is used with a
ReleasableBytesStreamOutput as we need to close the compressed stream to ensure all of the data
is written from this stream. Closing the compressed stream will try to close the underlying stream
but we only want to flush so that all of the written bytes are available.
Additionally, an error message method added in the BytesRestResponse did not use a builder
provided by the channel and instead created its own JSON builder. This changes that method to use the channel builder and in turn the bytes stream output that is managed by the channel.
This commit changes the listener passed to sendMessage from a Runnable
to a ActionListener.
This change also removes IOException from the sendMessage signature.
That signature is misleading as it allows implementers to assume an
exception will be thrown in case of failure. That does not happen due
to Netty's async nature.
This commit upgrades the Netty dependencies from version 4.1.8 to
version 4.1.9. This commit picks up a few bug fixes that impacted us:
- Netty was incorrectly ignoring interfaces with self-assigned MAC
addresses (e.g., instances running in Docker containers or on EC2)
- incorrect handling of the Expect: 100-continue header
Relates #23540
With this commit we change the default receive predictor size for Netty
from 32kB to 64kB as our testing has shown that this leads to less
allocations on smaller heaps like the default out of the box
configuration and this value also works reasonably well for larger
heaps.
Closes#23185
Previously, the RestController would stash the context prior to copying headers. However, there could be deprecation
log messages logged and in turn warning headers being added to the context prior to the stashing of the context. These
headers in the context would then be removed from the request and also leaked back into the calling thread's context.
This change moves the stashing of the context to the HttpTransport so that the network threads' context isn't
accidentally populated with warning headers and to ensure the headers added early on in the RestController are not
excluded from the response.
The dependencyLicenses check has the ability to map multiple jar files
to the same license file. However, netty was not taking advantage of
this, and had duplicate copies of its license/notice files for each jar.
This commit reduces the copies to one and uses the mapping feature.
This commit sets the intial size of the pipeline handler queue small to
prevent waste if pipelined requests are never sent. Since the queue will
grow quickly if pipeline requests are indeed set, this should not be
problematic.
Relates #23335
When pipelined responses are sent to the pipeline handler for writing,
they are not necessarily written immediately. They must be held in a
priority queue until all responses preceding the given response are
written. This means that when write is invoked on the handler, the
promise that is attached to the write invocation will not necessarily be
the promise associated with the responses that are written while the
queue is drained. To address this, the promise associated with a
pipelined response must be held with the response and then used when the
channel context is actually written to. This was introduced when
ensuring that the releasing promise is always chained through on write
calls lest the releasing promise never be invoked. This leads to many
failing test cases, so no new test cases are needed here.
Relates #23317
When sending a response to a client, we attach a releasing listener to
the channel promise. If the client disappears before the response is
sent, the releasing listener was never notified. The reason the
listeners were never notified was due to a mistaken invocation of write
and flush on the channel which has two overrides: one that takes an
existing promise, and one that does not and instead creates a new
promise. When the client disappears, it is this latter promise that is
notified, which does not contain the releasing listener. This commit
addreses this issue by invoking the override that passes our channel
promise through.
Relates #23310
Previously we calculated Netty' receive predictor size for HTTP and transport
traffic based on available memory and worker nodes. This resulted in a receive
predictor size between 64kb and 512kb. In our benchmarks this leads to increased
GC pressure.
With this commit we set Netty's receive predictor size to 32kb. This value is in
a sweet spot between heap memory waste (-> GC pressure) and effect on request
metrics (achieved throughput and latency numbers).
Closes#23185
This commit enforces the requirement of Content-Type for the REST layer and removes the deprecated methods in transport
requests and their usages.
While doing this, it turns out that there are many places where *Entity classes are used from the apache http client
libraries and many of these usages did not specify the content type. The methods that do not specify a content type
explicitly have been added to forbidden apis to prevent more of these from entering our code base.
Relates #19388
Get HEAD requests incorrectly return a content-length header of 0. This
commit addresses this by removing the special handling for get HEAD
requests, and just relying on the general mechanism that exists for
handling HEAD requests in the REST layer.
Relates #23186
Get source HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for get
source HEAD requests, and just relying on the general mechanism that
exists for handling HEAD requests in the REST layer.
Relates #23151
When Netty decodes a bad HTTP request, it marks the decoder result on
the HTTP request as a failure, and reroutes the request to GET
/bad-request. This either leads to puzzling responses when a bad request
is sent to Elasticsearch (if an index named "bad-request" does not exist
then it produces an index not found exception and otherwise responds
with the index settings for the index named "bad-request"). This commit
addresses this by inspecting the decoder result on the HTTP request and
dispatching the request to a bad request handler preserving the initial
cause of the bad request and providing an error message to the client.
Relates #23153
This commit adds a new method to the TransportChannel that provides access to the version of the
remote node that the response is being sent on and that the request came from. This is helpful
for serialization of data attached as headers.
Template HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for
template HEAD requests, and just relying on the general mechanism that
exists for handling HEAD requests in the REST layer.
Relates #23130
Index HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for index
HEAD requests, and just relying on the general mechanism that exists for
handling HEAD requests in the REST layer.
Relates #23112
Alias HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for alias
HEAD requests, and just relying on the general mechanism that exists for
handling HEAD requests in the REST layer.
Relates #23094
Netty 4.1.8 wraps connect and accept operations in doPrivileged blocks.
This means that we not need to give permissions to the entire transport
module. Additionally this commit deletes the privileged socket channel
and privileged server socket chanel.
#22194 gave us the ability to open low level temporary connections to remote node based on their address. With this use case out of the way, actual full blown connections should validate the node on the other side, making sure we speak to who we think we speak to. This helps in case where multiple nodes are started on the same host and a quick node restart causes them to swap addresses, which in turn can cause confusion down the road.
This is related to #22116. Core no longer needs `SocketPermission`
`connect`.
This permission is relegated to these modules/plugins:
- transport-netty4 module
- reindex module
- repository-url module
- discovery-azure-classic plugin
- discovery-ec2 plugin
- discovery-gce plugin
- repository-azure plugin
- repository-gcs plugin
- repository-hdfs plugin
- repository-s3 plugin
And for tests:
- mocksocket jar
- rest client
- httpcore-nio jar
- httpasyncclient jar
This commit upgrades the checkstyle configuration from version 5.9 to
version 7.5, the latest version as of today. The main enhancement
obtained via this upgrade is better detection of redundant modifiers.
Relates #22960
This change adds a strict mode for xcontent parsing on the rest layer. The strict mode will be off by default for 5.x and in a separate commit will be enabled by default for 6.0. The strict mode, which can be enabled by setting `http.content_type.required: true` in 5.x, will require that all incoming rest requests have a valid and supported content type header before the request is dispatched. In the non-strict mode, the Content-Type header will be inspected and if it is not present or not valid, we will continue with auto detection of content like we have done previously.
The content type header is parsed to the matching XContentType value with the only exception being for plain text requests. This value is then passed on with the content bytes so that we can reduce the number of places where we need to auto-detect the content type.
As part of this, many transport requests and builders were updated to provide methods that
accepted the XContentType along with the bytes and the methods that would rely on auto-detection have been deprecated.
In the non-strict mode, deprecation warnings are issued whenever a request with body doesn't provide the Content-Type header.
See #19388
This commit adds a SpecialPermission constant and uses that constant
opposed to introducing new instances everywhere.
Additionally, this commit introduces a single static method to check that
the current code has permission. This avoids all the duplicated access
blocks that exist currently.
This is related to #22116. Core no longer needs SocketPermission
accept. This permission is relegated to the transport-netty4 module
and (for tests) to the mocksocket jar.
Previously, certain settings that could take multiple comma delimited
values would pick up incorrect values for all entries but the first if
each comma separated value was followed by a whitespace character. For
example, the multi-value "A,B,C" would be correctly parsed as
["A", "B", "C"] but the multi-value "A, B, C" would be incorrectly parsed
as ["A", " B", " C"].
This commit allows a comma separated list to have whitespace characters
after each entry. The specific settings that were affected by this are:
cluster.routing.allocation.awareness.attributes
index.routing.allocation.require.*
index.routing.allocation.include.*
index.routing.allocation.exclude.*
cluster.routing.allocation.require.*
cluster.routing.allocation.include.*
cluster.routing.allocation.exclude.*
http.cors.allow-methods
http.cors.allow-headers
For the allocation filtering related settings, this commit also provides
validation of each specified entry if the filtering is done by _ip,
_host_ip, or _publish_ip, to ensure that each entry is a valid IP
address.
Closes#22297
Today we have quite some abstractions that are essentially providing a simple
dispatch method to the plugins defining a `HttpServerTransport`. This commit
removes `HttpServer` and `HttpServerAdaptor` and introduces a simple `Dispatcher` functional
interface that delegate to `RestController` by default.
Relates to #18482
This is related to #22116. netty channels require socket `connect` and
`accept` privileges. Netty does not currently wrap these operations
with `doPrivileged` blocks. These changes extend the netty channels
and wrap calls to the relevant super methods in doPrivileged blocks.
This integrates the mocksocket jar with elasticsearch tests. Mocksocket wraps actions requiring SocketPermissions in doPrivilege blocks. This will eventually allow SocketPermissions to be assigned to the mocksocket jar opposed to the entire elasticsearch codebase.
We previously named the thread using a frame from the stack trace, but
this was removed to simplify the code here. However, the comment
explaining this was left behind and this commit cleans that up.
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
Introduces `XContentParser#namedObject which works a little like
`StreamInput#readNamedWriteable`: on startup components register
parsers under names and a superclass. At runtime we look up the
parser and call it to parse the object.
Right now the parsers take a context object they use to help with
the parsing but I hope to be able to eliminate the need for this
context as most what it is used for at this point is to move
around parser registries which should be replaced by this method
eventually. I make no effort to do so in this PR because it is
big enough already. This is meant to the a start down a road that
allows us to remove classes like `QueryParseContext`,
`AggregatorParsers`, `IndicesQueriesRegistry`, and
`ParseFieldRegistry`.
The goal here is to reduce the amount of plumbing required to
allow parsing pluggable things. With this you don't have to pass
registries all over the place. Instead you must pass a super
registry to fewer places and use it to wrap the reader. This is
the same tradeoff that we use for NamedWriteable and it allows
much, much simpler binary serialization. We think we want that
same thing for xcontent serialization.
The only parsing actually converted to this method is parsing
`ScoreFunctions` inside of `FunctionScoreQuery`. I chose this
because it is relatively self contained.
In #22094 we introduce a test-only setting to simulate transport
impls that don't support handshakes. This commit implements the same logic
without a setting.
Today we initialize Netty in a static initializer. We trigger this
method via static initializers from Netty-related classes, but we can
trigger this method earlier than we do to ensure that Netty is
initialized how we want it to be.
Low level handshake code doesn't handle situations gracefully if the connection
is concurrently closed or reset by peer. This commit adds the relevant code to
fail the handshake if the connection is closed.
Today we rely on the version that the API user passes in together with the DiscoveryNode. This commit introduces a low level handshake where nodes exchange their version to be used with the transport protocol that is executed every time a connection to a node is established. This, on the one hand allows to change the wire protocol based on the version we are talking to even without a full cluster restart. Today we would need to carry on a BWC layer across major versions but with a handshake we can rely on the fact that the latest version of the previous minor executes a handshake and uses the latest protocol version across all communication with the N+1 version nodes.
This change is yet fully backwards compatible, a followup PR will remove the BWC in 6.0 once this has been back-ported to the 5.x branch
Today we connect and publish the nodes connection before we execute a
handshake with the node we connect to. In the case of connecting to a node
that won't pass the handshake this connection is already `published` and other
code paths can use it. This commit detaches the connection and the publish of the
connection such that `TransportService` can do a handshake before actually connect
and publish the connection.
I added an assertion to Netty4/Netty3Transport in 5.x that is not in
master yet. This commit port the assert to ensure we consumed all connection
in `connectToChannels`
We don't use the test infra nor do we run the tests. They might all be
entirely out of date. We also have a different BWC test infra in-place.
This change removes all of the legacy infra.
Timeouts are global today across all connections this commit allows to specify
a connection timeout per node such that depending on the context connections can
be established with different timeouts.
Relates to #19719
Alpar Torok
Christoph Büscher
Tim Brooks
David Turner
Yannick Welsch
Armin Braun
Christophe Bismuth
Gordon Brown
Daniel Mitterdorfer
Pratik Sanglikar
Nik Everett
Jay Modi
Alan Woodward
Or Bin
Jason Tedor
Simon Willnauer
Igor Motov
Ryan Ernst
Tanguy Leroux
Martijn van Groningen
Colin Goodheart-Smithe
Lee Hinman
Boaz Leskes
Michael Basnight
javanna
sabi0
Christoph Büscher
Ali Beyad
Simon Willnauer