* Enhances exists queries to reduce need for `_field_names`
Before this change we wrote the name all the fields in a document to a `_field_names` field and then implemented exists queries as a term query on this field. The problem with this approach is that it bloats the index and also affects indexing performance.
This change adds a new method `existsQuery()` to `MappedFieldType` which is implemented by each sub-class. For most field types if doc values are available a `DocValuesFieldExistsQuery` is used, falling back to using `_field_names` if doc values are disabled. Note that only fields where no doc values are available are written to `_field_names`.
Closes#26770
* Addresses review comments
* Addresses more review comments
* implements existsQuery explicitly on every mapper
* Reinstates ability to perform term query on `_field_names`
* Added bwc depending on index created version
* Review Comments
* Skips tests that are not supported in 6.1.0
These values will need to be changed after backporting this PR to 6.x
When a search is executing locally over many shards, we can stack
overflow during query phase execution. This happens due to callbacks
that occur after a phase completes for a shard and we move to the same
phase on another shard. If all the shards for the query are local to the
local node then we will never go async and these callbacks will end up
as recursive calls. With sufficiently many shards, this will end up as a
stack overflow. This commit addresses this by truncating the stack by
forking to another thread on the executor for the phase.
Relates #27069
The headers passed to reindex were skipped except for the last one. This
commit fixes the copying of the headers, as well as adds a base test
case for rest client builders to access the headers within the built
rest client.
relates #22976
This commit removes the `ByteBufStreamInput` `readBytesReference` and
`readBytesRef` methods. These methods are zero-copy which means that
they retain a reference to the underlying netty buffer. The problem is
that our `TcpTransport` is not designed to handle zero-copy. The netty
implementation sets the read index past the current message once it has
been deserialized, handled, and mostly likely dispatched to another
thread. This means that netty is free to release this buffer. So it is
unsafe to retain a reference to it without calling `retain`. And we
cannot call `retain` because we are not currently designed to handle
reference counting past the transport level.
This should not currently impact us as we wrap the `ByteBufStreamInput`
in `NamedWriteableAwareStreamInput` in the `TcpTransport`. This stream
essentially delegates to the underling stream. However, in the case of
`readBytesReference` and `readBytesRef` it leaves thw implementations
to the standard `StreamInput` methods. These methods call the read byte
array method which delegates to `ByteBufStreamInput`. The read byte
array method on `ByteBufStreamInput` copies so it is safe. The only
impact of this commit should be removing methods that could be dangerous
if they were eventually called due to some refactoring.
Upgrade to Jackson 2.9.2 and also use a boolean `closed` flag to
indicate that a FastStringReader instance is closed, so that length
is still correctly reported after the reader is closed.
Today all these API calls have a sideeffect of making documents visible
to search requests. While this is sometimes desired it's an unnecessary sideeffect
and now that we have an internal (engine-private) index reader (#26972) we artificially
add a refresh call for bwc. This change removes this sideeffect in 7.0.
Right now we are attempting to set SO_LINGER to 0 on server channels
when we are stopping the tcp transport. This is not a supported socket
option and throws an exception. This also prevents the channels from
being closed.
This commit 1. doesn't set SO_LINGER for server channges, 2. checks
that it is a supported option in nio, and 3. changes the log message
to warn for server channel close exceptions.
While opening a connection to a node, a channel can subsequently
close. If this happens, a future callback whose purpose is to close all
other channels and disconnect from the node will fire. However, this
future will not be ready to close all the channels because the
connection will not be exposed to the future callback yet. Since this
callback is run once, we will never try to disconnect from this node
again and we will be left with a closed channel. This commit adds a
check that all channels are open before exposing the channel and throws
a general connection exception. In this case, the usual connection retry
logic will take over.
Relates #26932
We had a TODO about adding tests around cached boxing. In #24077
I tracked down the uncached boxing tests and saw the TODO. Cached
boxing testing is a fairly small extension to that work.
With this commit we simplify our network layer by only allowing to define a
fixed receive predictor size instead of a minimum and maximum value. This also
means that the following (previously undocumented) settings are removed:
* http.netty.receive_predictor_min
* http.netty.receive_predictor_max
Using an adaptive sizing policy in the receive predictor is a very low-level
optimization. The implications on allocation behavior are extremely hard to grasp
(see our previous work in #23185) and adaptive sizing does not provide a lot of
benefits (see benchmarks in #26165 for more details).
Today we return a `String[]` that requires copying values for every
access. Yet, we already store the setting as a list so we can also directly
return the unmodifiable list directly. This makes list / array access in settings
a much cheaper operation especially if lists are large.
Right now if you run `gradle regen` on Windows you'll get `CRLF` line
endings on all the ANTLR generated files because we run
```
ant.fixcrlf(srcdir: outputPath) {
patternset(includes: 'Painless*.java')
}
```
The docs for fixcrlf say that the default line endings that it
corrects to is based on the OS:
https://ant.apache.org/manual/Tasks/fixcrlf.html
This change locks it to `LF`.
* Add additional low-level logging handler
We have the trace handler which is useful for recording sent messages
but there are times where it would be useful to have more low-level
logging about the events occurring on a channel. This commit adds a
logging handler that can be enabled by setting a certain log level
(org.elasticsearch.transport.netty4.ESLoggingHandler) to trace that
provides trace logging on low-level channel events and includes some
information about the request/response read/write events on the channel
as well.
* Remove imports
* License header
* Remove redundant
* Add test
* More assertions
We should unwrap the cause looking for any suppressed errors or root
causes that are errors when checking if we should maybe die. This commit
causes that to be the case.
Relates #26884
This commit changes the log level on a write and flush failure to warn
as this is not necessarily an Elasticsearch problem but more likely
indicative of an infrastructure problem.
Today we represent each value of a list setting with it's own dedicated key
that ends with the index of the value in the list. Aside of the obvious
weirdness this has several issues especially if lists are massive since it
causes massive runtime penalties when validating settings. Like a list of 100k
words will literally cause a create index call to timeout and in-turn massive
slowdown on all subsequent validations runs.
With this change we use a simple string list to represent the list. This change
also forbids to add a settings that ends with a .0 which was internally used to
detect a list setting. Once this has been rolled out for an entire major
version all the internal .0 handling can be removed since all settings will be
converted.
Relates to #26723
Since `#getAsMap` exposes internal representation we are trying to remove it
step by step. This commit is cleaning up some xcontent writing as well as
usage in tests
This commit fixes a #26855. Right now we set SO_LINGER to 0 if we are
stopping the transport. This can throw a ChannelClosedException if the
raw channel is already closed. We have a number of scenarios where it is
possible this could be called with a channel that is already closed.
This commit fixes the issue be checking that the channel is not closed
before attempting to set the socket option.
This commit reorders a maybe die check and a logging statement for the
following reasons:
- we should die as quickly as possible if the cause is fatal
- we do not want the JVM to be so broken that when we try to log
another exception is thrown (maybe another out of memory exception)
and then the maybe die is never invoked
- maybe die will log the cause anyway if the cause is fatal so we only
need to log if the cause is not fatal
Numeric fields no longer support the index_options parameter. This changes the parameter
to be rejected in numeric field types after it was deprecated in 6.0.
Closes#21475
We were accidentally defaulting it to the scroll size.
Untwists some of the tricks that we play with parsing
so that the size is no longer scrambled.
Closes#26761
This change adds a fromXContent method to Settings that allows to read
the xcontent that is produced by toXContent. It also replaces the entire settings
loader infrastructure and removes the structured map representation. Future PRs will
also tackle the `getAsMap` that exposes the internal represenation of settings for
better encapsulation.
The `fielddata` field and the use of the `_name` field in the short syntax of the range
query have been deprecated in 5.0 and can be removed.
The same goes for the deprecated `score_mode` field in HasParentQueryBuilder,
the deprecated `like_text`, `ids` and `docs` parameter in the `more_like_this` query,
the deprecated query name in the short version of the `regexp` query, and several
deprecated alternative field names in other query builders.
The `type` field has been deprecated in 5.0 and can be removed. It has been
replaced by using the MatchPhraseQueryBuilder or the
MatchPhrasePrefixQueryBuilder. The `slop` field has also been deprecated and can
be removed, the phrase and phrase prefix query builders still provide this
parameter.
Adds several small whitelist data structures and a new Whitelist class to separate the idea of loading a whitelist from the actual Painless Definition class. This is the first step of many in allowing users to define custom whitelists per context. Also supports the idea of loading multiple whitelists from different sources for a single context.
Today we can't validate the array length in `InputStreamStreamInput` since
we can't rely on `InputStream.available` yet in some situations we know
the size of the stream and can apply additional validation.
Removing several occurrences of this typo in the docs and javadocs, seems to be
a common mistake. Corrections turn up once in a while in PRs, better to correct
some of this in one sweep.
* Fix percolator highlight sub fetch phase to not highlight query twice
The PercolatorHighlightSubFetchPhase does not override hitExecute and since it extends HighlightPhase the search hits
are highlighted twice (by the highlight phase and then by the percolator). This does not alter the results, the second highlighting
just overrides the first one but this slow down the request because it duplicates the work.
Today we have all non-plugin mappers in core. I'd like to start moving those
that neither map to json datatypes nor are very frequently used like `date` or
`ip` to a module.
This commit creates a new module called `mappers-extra` and moves the
`scaled_float` and `token_count` mappers to it. I'd like to eventually move
`range` fields there but it's more complicated due to their intimate
relationship with range queries.
Relates #10368
RangeQueryBuilder needs to perform too many `instanceof` checks in order to
check for `date` or `range` fields in order to know what it should do with the
shape relation, time zone and date format.
This commit adds those 3 parameters to the `rangeQuery` factory method so that
those instanceof checks are not necessary anymore.
The percolator will add a `_percolator_document_slot` field to all percolator
hits to indicate with what document it has matched. This number matches with
the order in which the documents have been specified in the percolate query.
Also improved the support for multiple percolate queries in a search request.
Security manager policy files contains grants for specific codebases,
where a codebase is a jar file. We use a system property containing the
name of the jar file to resolve the jar file location when parsing the
policy file. However, this means the version of the jars must be
modified when versions of dependencies change. This is particularly
messy for elasticsearch, where we now have a dependency on the rest
client, and need to support both a snapshot version for testing and non
snapshot for release.
This commit adds an alias for the elasticsearch rest client without a
version to be used in policy files. That allows the policy files to not care whether
the rest client is a snapshot or release.
* If in a range query upper is smaller than lower then ignore the range query
* If two empty range extractions are compared don't fail with NoSuchElementException
The `index.percolator.map_unmapped_fields_as_text` is a more better name, because unmapped fields are mapped to a text field with default settings
and string is no longer a field type (it is either keyword or text).
The current script service has a script compilation limit for a one
minute window. This is set to a small default value of 15. Instead of
increasing that default value, this commit introduces a new setting
that allows to configure a rate per time unit, so that the script service can deal with bursts better.
The new setting is named `script.max_compilations_rate`,
requires a nonnegative number and a positive time value.
The default is `75/5m`, which is equivalent to the existing 15 per minute.
* Moves deferring code into its own subclass
This change moves the code that deals with deferring collection to a subclass of BucketAggregator called DeferringBucketAggregator. This means that the code in AggregatorBase is simplified and also means that the code for deferring colleciton is in one place and easier to maintain.
* Makes SIngleBucketAggregator an interface
This is so aggregators that extend BucketsAggregator directly and those that extend DeferringBucketAggregator can be a single bucket aggregator
* review comments
* More review comments
* Remove the _all metadata field
This change removes the `_all` metadata field. This field is deprecated in 6
and cannot be activated for indices created in 6 so it can be safely removed in
the next major version (e.g. 7).
At current, we do not feel there is enough of a reason to shade the low
level rest client. It caused problems with commons logging and IDE's
during the brief time it was used. We did not know exactly how many
users will need this, and decided that leaving shading out until we
gather more information is best. Users can still shade the jar
themselves. For information and feeback, see issue #26366.
Closes#26328
This reverts commit 3a20922046.
This reverts commit 2c271f0f22.
This reverts commit 9d10dbea39.
This reverts commit e816ef89a2.
There is a group of five settings relating to raw tcp configurations
(no_delay, buffer sizes, etc) that we have for the http transport. These
currently live in the netty module. As they are unrelated to netty
specifically, this commit moves these settings to the
`HttpTransportSettings` class in core.
When slices is set as auto, there's an additional network call
needed for the reindex tasks to know how to rethrottle. Sometimes
the rethrottle action happens before the reindex task is fully
initialized, so in the test we wait for the task to be ready.
This commit also adds some safeguards to ensure that
cancel and rethrottle operations are handled correctly
Closes#26192
Links to inner classes were using `$` in urls instead of `.`, causing
them to 404.
Also fixes the doc generation code to generate docs into the correct
directory. We moved the docs but never updated the generation code.
Right now it is possible for the `HttpPipeliningHandler` to queue
pipelined responses. On channel close, we do not clear and release these
responses. This commit releases the responses and completes the promise.
Due to the weird way of structuring the serialization code in AcknowledgedRequest, many request types forgot to properly serialize the request timeout, for example "index deletion", "index rollover", "index shrink", "putting pipeline", and other requests. This means that if those requests were not directly sent to the master node, the acknowledgement timeout information would be lost (and the default used instead).
Some requests also don't properly expose the timeout mechanism in the REST layer, such as put / delete stored script. This commit fixes all that.
This test was too lenient with its randomization of targetFieldName and
resulting in a conflict with the original existing fields. This commit
fixes that.
Closes#26177.
The following token filters were moved: arabic_stem, brazilian_stem, czech_stem, dutch_stem, french_stem, german_stem and russian_stem.
Relates to #23658
In reindex APIs, when using the `slices` parameter to choose the number of slices, adds the option to specify `slices` as "auto" which will choose a reasonable number of slices. It uses the number of shards in the source index, up to a ceiling. If there is more than one source index, it uses the smallest number of shards among them.
This gives users an easy way to use slicing in these APIs without having to make decisions about how to configure it, as it provides a good-enough configuration for them out of the box. This may become the default behavior for these APIs in the future.
The percolator field mapper doesn't need to extract all terms and ranges from a bool query with must or filter clauses.
In order to help to default extraction behavior, boost fields can be configured, so that fields that are known for not being
selective enough can be ignored in favor for other fields or clauses with specific fields can forcefully take precedence over other clauses.
This can help selecting clauses for fields that don't match with a lot of percolator queries over other clauses and thus improving performance of the percolate query.
For example a status like field is something that should configured as an ignore field.
Queries on this field tend to match with more documents and so if clauses for this fields
get selected as best clause then that isn't very helpful for the candidate query that the
percolate query generates to filter out percolator queries that are likely not going to match.
With this commit we remove the following three previously unused
(and undocumented) Netty 4 related settings:
* transport.netty.max_cumulation_buffer_capacity,
* transport.netty.max_composite_buffer_components and
* http.netty.max_cumulation_buffer_capacity
from Elasticsearch.
We introduced a hack in #25885 to respect the cluster alias if available on the `_index` field. This is important if aggregations or other field data related operations are executed. Yet, we added a small hack that duplicated an implementation detail from the `_index` field data builder to make this work. This change adds a necessary but simple API change that allows us to remove the hack and only have a single implementation.
The goal of this similarity is to help users who would like to keep the
functionality of the `tf-idf` similarity that we want to remove, or to allow
for specific usec-cases (disabling idf, disabling tf, disabling length norm,
etc.) to not have to build a custom plugin and familiarize with the low-level
Lucene API.
Raw requests are supported only by the java yaml test runner and were introduced to test docs snippets. Some yaml tests ended up using them (see #23497) which causes failures for other language clients. This commit migrates those yaml tests to Java tests that send requests through the Java low-level REST client, and also moves the ability to send raw requests to a special client that's only available when testing docs snippets.
Closes#25694
* Adds mutate function to various tests
Relates to #25929
* fix test
* implements mutate function for all single bucket aggs
* review comments
* convert getMutateFunction to mutateIInstance
This commit adds the nio transport as an option in place of the mock tcp
transport for tests. Each test will only use one transport type. The
transport type is decided by a random boolean generated inside of the
`ESTestCase` class.
This commit updates the version for master to 7.0.0-alpha1. It also adds
the 6.1 version constant, and fixes many tests, as well as marking some
as awaits fix.
Closes#25893Closes#25870
This commit fixes an issue with the Netty 4 multi-port test that a
transport client can connect. The problem here is that in case the
bottom of the random port range was already bound to (for example, by
another JVM) then then transport client could not connect to the data
node. This is because the transport client was in fact using the bottom
of the port range only. Instead, we simply try all the ports that the
data node might be bound to.
Closes#24441
The following token filters were moved: delimited_payload_filter, keep, keep_types, classic, apostrophe, decimal_digit, fingerprint, min_hash and scandinavian_folding.
Relates to #23658
The Writeble representation is less heavy to parse and that will benefit percolate performance and throughput.
The query builder's binary format has now the same bwc guarentees as the xcontent format.
Added a qa test that verifies that percolator queries written in older versions are still readable by the current version.
This change merges the functionality of the FiltersFunctionScoreQuery in the FunctionScoreQuery.
It also ensures that an exception is thrown when the computed score is equals to Float.NaN or Float.NEGATIVE_INFINITY.
These scores are invalid for TopDocsCollectors that relies on score comparison.
Fixes#15709Fixes#23628
Extracts ranges from range queries on byte, short, integer, long, half_float, scaled_float, float, double, date and ip fields.
byte, short, integer and date ranges are normalized to Lucene's LongRange.
half_float and float are normalized to Lucene's DoubleRange.
When extracting range queries, the QueryAnalyzer computes the width of the range. This width is used to determine
what range should be preferred in a conjunction query. The QueryAnalyzer prefers the smaller ranges, because these
ranges tend to match with less documents.
Closes#21040
Today we expose `IndexFieldDataService` outside of IndexService to do maintenance
or lookup field data in different ways. Yet, we have a streamlined way to access IndexFieldData
via `QueryShardContext` that should encapsulate all access to it. This also ensures that we control all other functionality like cache clearing etc.
This change also removes the `recycler` option from `ClearIndicesCacheRequest` this option is a no-op and should have been removed long ago.
Today when we aggregate on the `_index` field the cross cluster search
alias is not taken into account. Neither is it respected when we search
on the field. This change adds support for cluster alias when the cluster
alias is present on the `_index` field.
Closes#25606
This commit removes all external dependencies from the rest client jar
and shades them in an 'org.elasticsearch.client' package within the jar
using shadowJar gradle plugin. All projects that depended on the
existing jar have been converted to using the 'org.elasticsearch.client'
package prefixes to interact with the rest client.
Closes#25208
This change disables the graph analysis on default `shingle` filter.
The pre-configured shingle filter produces shingles of different size.
Graph analysis on such token stream is useless and dangerous as it may create too many paths.
Fixes#25555
This change rewrites search requests on the coordinating node before
we send requests to the individual shards. This will reduce the rewrite load
and object creation for each rewrite on the executing nodes and will fetch
resources only once instead of N times once per shard for queries like `terms`
query with index lookups. (among percolator and geo-shape)
Relates to #25791
Also has updates to ScriptMetaData for allowing the old namespace format to be loaded all the way back through 5.0; however, it will throw an exception if two scripts share the same id but different languages.
The `QueryRewriteContext` used to provide a client object that can
be used to fetch geo-shapes, terms or documents for percolation. Unfortunately
all client calls used to be blocking calls which can have significant impact on the
rewrite phase since it occupies an entire search thread until the resource is
received. In the case that the index the resource is fetched from isn't on the local
node this can have significant impact on query throughput.
Note: this doesn't fix MLT since it fetches stuff in doQuery which is a different beast. Yet, it is a huge step in the right direction
This commit calls the `useSystemProperties` method on the HttpAsyncClientBuilder so that the jvm
system properties are used. The primary reason for doing this is to ensure the builder uses the
system default SSLContext rather than the default instance created by the http client library.
Closes#23231
Today we have duplicated code that is quite complicated to iterate
over rewriteable (`QueryBuilders` mainly) This change introduces a
`Rewriteable` interface that allow to share code to do the rewriting as
well as encapsulation and composition of queries.
We currently use fielddata on the `_id` field which is trappy, especially as we
do it implicitly. This changes the `random_score` function to use doc ids when
no seed is provided and to suggest a field when a seed is provided.
For now the change only emits a deprecation warning when no field is supplied
but this should be replaced by a strict check on 7.0.
Closes#25240
The following token filters were moved: arabic_normalization, german_normalization, hindi_normalization, indic_normalization, persian_normalization, scandinavian_normalization, serbian_normalization, sorani_normalization, cjk_width and cjk_width
Relates to #23658
This change refactors the query_string query to analyze the query text around logical operators of the query string the same way than a match_query/multi_match_query.
It also adds a type parameter that can be used to change the way multi fields query are built the same way than a multi_match query does.
Now that these queries share the same behavior regarding text analysis, some parameters are obsolete and have been deprecated:
split_on_whitespace: This setting is now ignored with a deprecation notice
if it is used explicitely. With this PR The query_string always splits on logical operator.
It simplifies the understanding of the other parameters that can have different meanings
depending on the value of split_on_whitespace.
auto_generate_phrase_queries: This setting is now ignored with a deprecation notice
if it is used explicitely. This setting only makes sense when the parser splits on whitespace.
use_dismax: This setting is now ignored with a deprecation notice
if it is used explicitely. The tie_breaker parameter is sufficient to handle best_fields/most_fields.
Fixes#25574
It was brought up that our current client artifacts have generic names like 'rest' that may cause conflicts with other artifacts.
This commit renames:
- rest -> elasticsearch-rest-client
- sniffer -> elasticsearch-rest-client-sniffer
- rest-high-level -> elasticsearch-rest-high-level-client
A couple of small changes are also preparing the high level client for its first release.
Closes#20248
Today if we search across a large amount of shards we hit every shard. Yet, it's quite
common to search across an index pattern for time based indices but filtering will exclude
all results outside a certain time range ie. `now-3d`. While the search can potentially hit
hundreds of shards the majority of the shards might yield 0 results since there is not document
that is within this date range. Kibana for instance does this regularly but used `_field_stats`
to optimize the indexes they need to query. Now with the deprecation of `_field_stats` and it's upcoming removal a single dashboard in kibana can potentially turn into searches hitting hundreds or thousands of shards and that can easily cause search rejections even though the most of the requests are very likely super cheap and only need a query rewriting to early terminate with 0 results.
This change adds a pre-filter phase for searches that can, if the number of shards are higher than a the `pre_filter_shard_size` threshold (defaults to 128 shards), fan out to the shards
and check if the query can potentially match any documents at all. While false positives are possible, a negative response means that no matches are possible. These requests are not subject to rejection and can greatly reduce the number of shards a request needs to hit. The approach here is preferable to the kibana approach with field stats since it correctly handles aliases and uses the correct threadpools to execute these requests. Further it's completely transparent to the user and improves scalability of elasticsearch in general on large clusters.
Requests that execute a stored script will no longer be allowed to specify the lang of the script. This information is stored in the cluster state making only an id necessary to execute against. Putting a stored script will still require a lang.
There is a bug when a call to `BytesReferenceStreamInput` skip is made
on a `BytesReference` that has an initial offset. The offset for the
current slice is added to the current index and then subtracted from the
length. This introduces the possibility of a negative number of bytes to
skip. This happens inside a loop, which leads to an infinte loop.
This commit correctly subtracts the current slice index from the
slice.length. Additionally, the `BytesArrayTests` are modified to test
instances that include an offset.
Currently when we close a channel in Netty4Utils.closeChannels we
block until the closing is complete. This introduces the possibility
that a network selector thread will block while waiting until a
separate network selector thread closes a channel.
For instance: T1 closes channel 1 (which is assigned to a T1 selector).
Channel 1's close listener executes the closing of the node. That
means that T1 now tries to close channel 2. However, channel 2 is
assigned to a selector that is running on T2. T1 now must wait until T2
closes that channel at some point in the future.
This commit addresses this by adding a boolean to closeChannels
indicating if we should block on close. We only set this boolean to true
if we are closing down the server channels at shutdown. This call is
never made from a network thread. When we call the closeChannels method
with that boolean set to false, we do not block on close.
This commit does two things:
- bumps the version from 6.0.0-alpha3 to 6.0.0-beta1
- renames the 6.0.0-alpha3 version constant to 6.0.0-beta1
Relates #25621
Indexing ids in binary form should help with indexing speed since we would
have to compare fewer bytes upon sorting, should help with memory usage of
the live version map since keys will be shorter, and might help with disk
usage depending on how efficient the terms dictionary is at compressing
terms.
Since we can only expect base64 ids in the auto-generated case, this PR tries
to use an encoding that makes the binary id equal to the base64-decoded id in
the majority of cases (253 out of 256). It also specializes numeric ids, since
this seems to be common when content that is stored in Elasticsearch comes
from another database that uses eg. auto-increment ids.
Another option could be to require base64 ids all the time. It would make things
simpler but I'm not sure users would welcome this requirement.
This PR should bring some benefits, but I expect it to be mostly useful when
coupled with something like #24615.
Closes#18154
Transport profiles unfortunately have never been validated. Yet, it's very
easy to make a mistake when configuring profiles which will most likely stay
undetected since we don't validate the settings but allow almost everything
based on the wildcard in `transport.profiles.*`. This change removes the
settings subset based parsing of profiles but rather uses concrete affix settings
for the profiles which makes it easier to fall back to higher level settings since
the fallback settings are present when the profile setting is parsed. Previously, it was
unclear in the code which setting is used ie. if the profiles settings (with removed
prefixes) or the global node setting. There is no distinction anymore since we don't pull
prefix based settings.
* Adds check for negative search request size
This change adds a check to `SearchSourceBuilder` to throw and exception if the size set on it is set to a negative value.
Closes#22530
* fix error in reindex
* update re-index tests
* Addresses review comment
* Fixed tests
* Added random negative size test
* Fixes test
QueryParseContext is currently only used as a wrapper for an XContentParser, so
this change removes it entirely and changes the appropriate APIs that use it so
far to only accept a parser instead.
This commit makes the use of the global network settings explicit instead
of implicit within NetworkService. It cleans up several places where we fall
back to the global settings while we should have used tcp or http ones.
In addition this change also removes unnecessary settings classes
These settings have not be working for a full major version since they
are not registered. Given that they are simply duplicates we can just remove
them.
Currently QueryParseContext is only a thin wrapper around an XContentParser that
adds little functionality of its own. I provides helpers for long deprecated
field names which can be removed and two helper methods that can be made static
and moved to other classes. This is a first step in helping to remove
QueryParseContext entirely.
This removes the remaining usage of `mapping.single_type` from the parent join
module and moves it's bwc test to the mixed cluster tests
Relates to #24961
Relates to #20257
The following token filters were moved: stemmer, stemmer_override, kstem, dictionary_decompounder, hyphenation_decompounder, reverse, elision and truncate.
Relates to #23658
* Remove the setting from the yml tests and replace with tests using
`join` field. We can't use the setting in yml tests without lots of
backflips but we have `ReindexParentChildTests` for the coverage.
There weren't tests for `join` field with reindex before this. Adding
these tests discovered #25363.
* Remove the setting from `ReindexParentChildTests` and replace with
`index.version.created=V_5_6_0`. This test can be entirely removed
when legacy parent/child support is dropped from core.
* Port the yml tests that set _parent into integ tests so they
can set the index created version. These tests can be removed
when we drop support for _parent in core.
* Port a delete-by-query test for filtering based on type to an
`ESIntegTestCase` so it can use `index.version.created=5.6.0` to
setup documents of multiple types. This whole feature can be dropped
when we no longer support multiple types per index.
Relates to #24961
This change cleans up remaining tests to not use index.mapping.single_type=false
but instead where applicable use a single type or markt the index as created
with a pre 6.x version.
Yet, there is still on leftover in the client tests that needs special attention.
See `org.elasticsearch.client.SearchIT`
Relates to #24961
Tests were randomly assigning `targetField` to an existing field that was an array,
causing path resolution issues. This PR fixes those tests
Closes#25346 & #25348
Custom whitelists in Painless will need to allow classes to be augmented beyond the currently hard-coded Augmentation class tied to Painless directly. This change allows any class to specify an augmentation on a Painless struct using an appropriate static method. Changes to loading the whitelist have also been created to allow for this specification of a different class for augmentation.
Most notable changes:
- better update concurrency: LUCENE-7868
- TopDocs.totalHits is now a long: LUCENE-7872
- QueryBuilder does not remove the boolean query around multi-term synonyms:
LUCENE-7878
- removal of Fields: LUCENE-7500
For the `TopDocs.totalHits` change, this PR relies on the fact that the encoding
of vInts and vLongs are compatible: you can write and read with any of them as
long as the value can be represented by a positive int.
The `document_type` parameter is no longer required to be specified,
because by default from 6.0 only a single type is allowed. (`index.mapping.single_type` defaults to `true`)
* [Analysis] Parse synonyms with the same analysis chain
Synonym Token Filter / Synonym Graph Filter tokenize synonyms with whatever tokenizer and token filters appear before it in the chain.
Close#7199
I'm still trying to hunt down rare failures in the cancelation tests
for reindex and friends. Here is the latest:
https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+5.x+multijob-unix-compatibility/os=ubuntu/876/console
It doesn't show much, other than that one of the tasks didn't kill
itself when asked to cancel.
So I'm going a bit crazy with debug logging so that the next time this
comes up I can trace exactly what happened.
Additionally, this tweaks the logic around how rethrottles were
performed around cancel. Previously we set the `requestsPerSecond`
to `0` when we cancelled the task. That was the "old way" to set them
to inifity which was the intent. This switches that from `0` to
`Float.MAX_VALUE` which is the "new way" to set the `requestsPerSecond`
to infinity. I don't know that this is much better, but it feels better.
This change adds tests for the aggregation parsing that try to simulate that we
can parse existing aggregations in a forward compatible way in the future,
ignoring potential newly added fields or substructures to the xContent response.
Today TcpTransport is the de-facto base-class for transport implementations.
The need for all the callbacks we have in TransportServiceAdaptor are not necessary
anymore since we can simply have the logic inside the base class itself. This change
moves the stats metrics directly into TcpTransport removing the need for low level
bytes send / received callbacks.
Moves the keyword tokenizer to the analysis-common module. The keyword tokenizer is special because it is used by CustomNormalizerProvider so I pulled it out into its own PR. To get the move to work I've reworked the lookup from static to one using the AnalysisRegistry. This seems safe enough.
Part of #23658.
* Add a section named "relation" in the ParentJoinFieldMapper
This commit puts the parent/child definition in an inner section named "relation".
Mapping for the parent-join will look like this:
```
"join_field": {
"type": "join"
"relations":
"parent": "child"
}
}
```
to specify a `targetField`. This results in some interesting behavior that was missed in the review.
This processor sorts in-place, so there is a side-effect in both the original field and the target field.
Another bug was that the targetField was not being set if the list being sorted was fewer than two elements.
The new behavior works like this: If targetField and fieldName are not the same, we copy the list.
We use assertBusy in many places where the underlying code throw exceptions. Currently we need to wrap those exceptions in a RuntimeException which is ugly.
This commit adds a NamedXContentProvider interface that can
be implemented by plugins or modules using Java's SPI feature
in order to provide additional NamedXContent parsers to external
applications like the Java High Level Rest Client.
This snapshot has faster range queries on range fields (LUCENE-7828), more
accurate norms (LUCENE-7730) and the ability to use fake term frequencies
(LUCENE-7854).
This commit renames the needsScores method so as to make it
automatically generatable, based on the name of the `_score` variable
which is available in search scripts. It also adds documentation to
ScriptContext to explain the naming and signature of such methods.
Expose the experimental simplepattern and
simplepatternsplit tokenizers in the common
analysis plugin. They provide tokenization based
on regular expressions, using Lucene's
deterministic regex implementation that is usually
faster than Java's and has protections against
creating too-deep stacks during matching.
Both have a not-very-useful default pattern of the
empty string because all tokenizer factories must
be able to be instantiated at index creation time.
They should always be configured by the user
in practice.
Today if a channel gets closed due to a disconnect we notify the response
handler that the connection is closed and the node is disconnected. Unfortunately
this is not a complete solution since it only works for published connections.
Connections that are unpublished ie. for discovery can indefinitely hang since we
never invoke their handers when we get a failure while a user is waiting for
the response. This change adds connection tracking to TcpTransport that ensures
we are notifying the corresponding connection if there is a failure on a channel.
Get mappings HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for get
mappings HEAD requests, and just relying on the general mechanism that
exists for handling HEAD requests in the REST layer.
Relates #23192
Today when an exception is thrown handling a HEAD request, the body is
swallowed before the channel has a chance to see it. Yet, the channel is
where we compute the content length that would be returned as a header
in the response. This is a violation of the HTTP specification. This
commit addresses the issue. To address this issue, we remove the special
handling in bytes rest response for HEAD requests when an exception is
thrown. Instead, we let the upstream channel handle the special case, as
we already do today for the non-exceptional case.
Relates #25172
This commit adds back "id" as the key within a script to specify a
stored script (which with file scripts now gone is no longer ambiguous).
It also adds "source" as a replacement for "code". This is in an attempt
to normalize how scripts are specified across both put stored scripts and script usages, including search template requests. This also deprecates the old inline/stored keys.
This change removes the `postings` highlighter. This highlighter has been removed from Lucene master (7.x) because it behaves
exactly like the `unified` highlighter when index_options is set to `offsets`:
https://issues.apache.org/jira/browse/LUCENE-7815
It also makes the `unified` highlighter the default choice for highlighting a field (if `type` is not provided).
The strategy used internally by this highlighter remain the same as before, it checks `term_vectors` first, then `postings` and ultimately it re-analyzes the text.
Ultimately it rewrites the docs so that the options that the `unified` highlighter cannot handle are clearly marked as such.
There are few features that the `unified` highlighter is not able to handle which is why the other highlighters (`plain` and `fvh`) are still available.
I'll open separate issues for these features and we'll deprecate the `fvh` and `plain` highlighters when full support for these features have been added to the `unified`.
This PR enables Ingest plugins to leverage processor-scoped REST
endpoints. First of which being the Grok endpoint that retrieves
Grok Patterns for users to retrieve all the built-in patterns.
Example usage: Kibana Grok Autocomplete!
This commit modifies query_string, simple_query_string and multi_match queries to always use a DisjunctionMaxQuery when a disjunction over multiple fields is built. The tiebreaker is set to 1 in order to behave like the boolean query in terms of scoring.
The removal of the coord factor in Lucene 7 made this change mandatory to correctly handle minimum_should_match.
Closes#23966
The `scorerSupplier` API allows to give a hint to queries in order to let them
know that they will be consumed in a random-access fashion. We should use this
for aggregations, function_score and matched queries.
Previously the HEAD and GET aliases endpoints were misaigned in
behavior. The HEAD verb would 404 if any aliases are missing while the
GET verb would not if any aliases existed. When HEAD was aligned with
GET, this broke the previous usage of HEAD to serve as an existence
check for aliases. It is the behavior of GET that is problematic here
though, if any alias is missing the request should 404. This commit
addresses this by modifying the behavior of GET to behave in this
way. This fixes the behavior for HEAD to also 404 when aliases are
missing.
Relates #25043
This change moves the parent_id query to the parent-join module and handles the case when only the parent-join field can be declared on an index (index with single type on).
If single type is off it uses the legacy parent join field mapper and switch to the new one otherwise (default in 6).
Relates #20257
Unknown patterns used to silently be ignored. This was a problem because users did not know they were providing an invalid pattern name, and maybe thought the rest of their regexes were invalid.
Fixes#22831.
REST handlers that require a body will throw an an ElasticsearchParseException "request body required".
REST handlers that require a body OR source param will throw an ElasticsearchParseException "request body or source param required".
Replaced asserts in BulkRequest parsing code with a more descriptive IllegalArgumentException if the line contains an empty object.
Updated bulk REST test to verify an empty action line is rejected properly.
Updated BulkRequestTests with randomized testing for an empty action line.
Used try-with-resouces for XContentParser in AbstractBulkByQueryRestHandler.
This commit creates TemplateScript and associated classes so that
templates no longer need a special ScriptService.compileTemplate method.
The execute() method is equivalent to the old run() method.
relates #20426
* All public methods starting with get will be added as local variables
to the execute method.
* The execute method on a ScriptContext must be both public and
abstract. This method will be implemented by the Painless compiler.
* A static list of parameter names for the execute method must be
provided since the names will be eliminated at runtime.
* The uses$ methods will still be implemented as before.
* A single constructor may be provided by the ScriptContext. This
constructor will be overridden by the Painless compiler to include the
exact same arguments. This allows instances of a Painless script to
potentially contain state. If a constructor is not provided it is
assumed the default constructor with no arguments will be used.
This removes the `accumulateExceptions()` method (and its usage) from `TransportNodesAction` and `TransportTasksAction`, forcing both transport actions to always accumulate exceptions.
Without this change, some transport actions, like `TransportNodesStatsAction` would respond in very unexpected ways by returning no response due to some failure, but instead of returning an
error the response would simply be empty: no response and no error.
This results in a very trappy response structure where users can check for an error, then attempt to blindly use the response when no error is returned.
* Adds nodes usage API to monitor usages of actions
The nodes usage API has 2 main endpoints
/_nodes/usage and /_nodes/{nodeIds}/usage return the usage statistics
for all nodes and the specified node(s) respectively.
At the moment only one type of usage statistics is available, the REST
actions usage. This records the number of times each REST action class is
called and when the nodes usage api is called will return a map of rest
action class name to long representing the number of times each of the action
classes has been called.
Still to do:
* [x] Create usage service to store usage statistics
* [x] Record usage in REST layer
* [x] Add Transport Actions
* [x] Add REST Actions
* [x] Tests
* [x] Documentation
* Rafactors UsageService so counts are done by the handlers
* Fixing up docs tests
* Adds a name to all rest actions
* Addresses review comments
This change ensures that there is a single parent-join field defined per mapping.
The verification is done through the addition of a special field mapper (MetaJoinFieldMapper) with a unique name (_parent_join) that is registered to the mapping service
when the first parent-join field is defined. If a new parent-join is added, this field mapper will clash with the new one and the update will fail.
This change also simplifies the parent join fetch sub phase by retrieving the parent-join field without iterating on all fields in the mapping.
This commit adds an optional `context` url parameter to the put stored
script request. When a context is specified, the script is compiled
against that context before storing, as a validation the script will
work when used in that context.
* Introduce ParentJoinFieldMapper, a field mapper that creates parent/child relation within documents of the same index
This change adds a new field mapper named ParentJoinFieldMapper. This mapper is a replacement for the ParentFieldMapper but instead of using the types in the mapping
it uses an internal field to materialize parent/child relation within a single index.
This change also adds a fetch sub phase that automatically retrieves the join name (parent or child name) and the parent id for child documents in the response hit fields.
The compatibility with `has_parent`, `has_child` queries and `children` agg will be added in a follow up.
Relates #20257
ScriptContexts currently understand a FactoryType that can produce
instances of the script InstanceType. However, for search scripts, this
does not work as we have the concept of LeafSearchScript that is created
per lucene segment. This commit effectively renames the existing
SearchScript class into SearchScript.LeafFactory, which is a new,
optional, class that can be defined within a ScriptContext.
LeafSearchScript is effectively renamed back into SearchScript. This
change allows the model of stateless factory -> stateful factory ->
script instance to continue, but in a generic way that any script
context may take advantage of.
relates #20426
DateProcessor's DateFormat UNIX format parser resulted in
a floating point rounding error when parsing certain stringed
epoch times. Now Double.parseDouble is used, preserving the
intented input.
This commit adds a `doc_count` field to the response body of Matrix
Stats aggregation. It exposes the number of documents involved in
the computation of statistics, a value that can already be retrieved using
the method MatrixStats.getDocCount() in the Java API.
Removes the need for the `_UNRELEASED` suffix on versions by detecting if a version should be unreleased or not based on the versions around it. This should make it simpler to automate the task of adding a new version label.
This commit renames the concept of the "compiled type" to a "factory
type", along with all implementations of this class to be named Factory.
This brings it inline with the classes purpose.
This commit adds collection of all contexts to the parameters of
getScriptEngine. This will allow script engines like painless to
precache extra information about the contexts.
This is a simple refactoring to move the context definitions into the
type that they use. While we have multiple context names for the same
class at the moment, this will eventually become one ScriptContext per
instance type, so the pattern of a static member on the interface called
CONTEXT can be used. This commit also moves the consolidated list of
contexts provided by core ES into ScriptModule.
This commit changes the compile method of ScriptEngine to be generic in
the same way it is on ScriptService. This moves the shim of handling the
two existing context classes into each script engine, so that each
engine can be worked on independently to convert to real handling of
contexts.
This commit modifies the compile method of ScriptService to be context
aware. The ScriptContext is now a generic class which contains both the
instance type and compiled type for a script. Instance type may be
stateful (for example, pre loading field information for the index a
script will execute on, like in expressions), while the compiled type is
stateless and used to construct instance type instances. This change is
only a first step to cutover ScriptService to the new paradigm. It only
converts callers to the script service, and has a small shim to wrap
compilation from the script engines to support the current two fixed
instance types, SearchScript and ExecutableScript.
Since groovy was removed, we no longer have any ScriptEngines with
resources to release. We may want to keep the option open for a script
engine to close resources, but this would not be common. This commit
adds a default implementation to ScriptEngine for `close()` to reduce
the boiler plate that must be added for a ScriptEngine implementation.
This will be useful for the high level client to add support for the matrix stats aggregation, as we will ship with this jar by default like we do for parent-join-client which is aligned with distributing core with the modules already included.
Relates to #24796
This commit moves the handling of nested and parent/child inner hits to specialized classes that can be defined outside of ES core.
InnerHitBuilderContext is now used by the parent query (nested or hasChild, ...) to build the sub context from the InnerHitBuilder definition.
BWC is also ensured so that nodes in previous versions can still send/receive inner hits to/from this version.
Relates #20257
As we work towards contexts implying the return type of compilation, we
first need ScriptContext to not be an enum. This commit removes the
Standard enum and Plugin subclass of ScriptContext.
ScriptEngine implementations have an overridable method to indicate they
are safe to use as inline scripts. Since groovy was removed fro 6.0,
there are no longer any implementations which used the default false
value. Furthermore, the value was not actually read anywhere. This
commit removes the method. The ScriptEngineRegistry was also no longer
necessary as it only was used to build a map from language to engine.
Allows plugins to register pre-configured tokenizers. Much
of the decisions are the same as those in #24223, #24572,
and #24223. This only migrates the lowercase tokenizer but
I figure that is a good start because it proves out the features.
Colin Goodheart-Smithe
Jack Conradson
Christoph Büscher
Jason Tedor
Ryan Ernst
Tim Brooks
Martijn van Groningen
Tanguy Leroux
Simon Willnauer
Anton Pozhidaev
kel
Nik Everett
Daniel Mitterdorfer
Yannick Welsch
Md. Abdulla-Al-Sun
Armin Braun
Jiri Tyr
Michael Basnight
Jim Ferenczi
Adrien Grand
Alexander Reelsen
Tal Levy
Andy Bristol
Stuart Neivandt
Sergey Galkin
desmorto
olcbean
Luca Cavanna
Jay Modi
Jun Ohtani
Boaz Leskes
Alexander Kazakov
Guillaume Le Floch
Alex Benusovich
Chris Earle
javanna
Nicholas Knize