When `FilterStreamInput` wraps a Netty `ByteBuf` based stream it
did not forward the bulk primitive reads to the delegate.
These are optimized on the delegate but if they're not forwarded
then the delegate will be called e.g. 4 times to read an `int`.
This happens for essentially all network reads prior to this
change because they all run from a `NamedWritableAwareStreamInput`.
This also required optimising `BufferedChecksumStreamInput` individually to use bulk reads from the buffer because it implicitly assumed that the filter stream input wouldn't override any of the bulk operations.
The `top_metrics` agg is kind of like `top_hits` but it only works on
doc values so it *should* be faster.
At this point it is fairly limited in that it only supports a single,
numeric sort and a single, numeric metric. And it only fetches the "very
topest" document worth of metric. We plan to support returning a
configurable number of top metrics, requesting more than one metric and
more than one sort. And, eventually, non-numeric sorts and metrics. The
trick is doing those things fairly efficiently.
Co-Authored by: Zachary Tong <zach@elastic.co>
Fixes the the no-query optimization for `min` and `max` aggregations
for `date_nanos` fields by delegating decoding dates "through" their
`resolution` member.
Closes#52220
This commit makes the names of fetch subphases more consistent:
* Now the names end in just 'Phase', whereas before some ended in
'FetchSubPhase'. This matches the query subphases like AggregationPhase.
* Some names include 'fetch' like FetchScorePhase to avoid ambiguity about what
they do.
This adds a builder and parsed results for the `string_stats`
aggregation directly to the high level rest client. Without this the
HLRC can't access the `string_stats` API without the elastic licensed
`analytics` module.
While I'm in there this adds a few of our usual unit tests and
modernizes the parsing.
When `date_histogram` attempts to optimize itself it for a particular
time zone it checks to see if the entire shard is within the same
"transition". Most time zone transition once every size months or
thereabouts so the optimization can usually kicks in.
*But* it crashes when you attempt feed it a time zone who's last DST
transition was before epoch. The reason for this is a little twisted:
before this patch it'd find the next and previous transitions in
milliseconds since epoch. Then it'd cast them to `Long`s and pass them
into the `DateFieldType` to check if the shard's contents were within
the range. The trouble is they are then converted to `String`s which are
*then* parsed back to `Instant`s which are then convertd to `long`s. And
the parser doesn't like most negative numbers. And everything before
epoch is negative.
This change removes the
`long` -> `Long` -> `String` -> `Instant` -> `long` chain in favor of
passing the `long` -> `Instant` -> `long` which avoids the fairly complex
parsing code and handles a bunch of interesting edge cases around
epoch. And other edge cases around `date_nanos`.
Closes#50265
We need to reduce the translog sync interval for indices with translog
async setting so that we can have the safe commit in the assertBusy
interval. This is needed since #51905, where we use the local checkpoint
of the safe commit to calculate the number of uncommitted operations of
a translog stats.
Closes#52251
Relates #51905
This commit removes the need for DeprecatedRoute and ReplacedRoute to
have an instance of a DeprecationLogger. Instead the RestController now
has a DeprecationLogger that will be used for all deprecated and
replaced route messages.
Relates #51950
Backport of #52278
Add a new cluster setting `search.allow_expensive_queries` which by
default is `true`. If set to `false`, certain queries that have
usually slow performance cannot be executed and an error message
is returned.
- Queries that need to do linear scans to identify matches:
- Script queries
- Queries that have a high up-front cost:
- Fuzzy queries
- Regexp queries
- Prefix queries (without index_prefixes enabled
- Wildcard queries
- Range queries on text and keyword fields
- Joining queries
- HasParent queries
- HasChild queries
- ParentId queries
- Nested queries
- Queries on deprecated 6.x geo shapes (using PrefixTree implementation)
- Queries that may have a high per-document cost:
- Script score queries
- Percolate queries
Closes: #29050
(cherry picked from commit a8b39ed842c7770bd9275958c9f747502fd9a3ea)
The buffer in LoggingOutputStream skips flushing when only a newline
appears. However, if a windows newline appeared, the buffer length was
not reset. This commit resets the length so the \r does not appear in
the next logging message.
closes#51838
MockRandomMergePolicy randomly determines if a segment should use a
compound format. This can cause a force merge performing two merges: (1)
merging to a single segment, (2) rewriting the new segment using the
compound format. If the second merge completes after we have flushed,
then it can flip the flag shouldPeriodicallyFlushAfterBigMerge to true.
Closes#52205
Modifies SLM's and ILM's history indices to be hidden indices for added
protection against accidental querying and deletion, and improves
IndexTemplateRegistry to handle upgrading index templates.
Also modifies the REST test cleanup to delete hidden indices.
This removes a bunch of `instanceof`s in favor of two new methods on
`InernalAggregation`. The default implementations of these methods just
throw exceptions explaining that you can't sort on this aggregation.
They are overridden by all of the classes that used to have `instanceof`
checks against them.
I doubt this is really any faster in practice. The real benefit here is
that it is a little more obvious *that* you can sort by the results of
an aggregation and it should be *much* more obvious where to look at
*how* aggregations sort themselves.
There are still a bunch more `instanceof`s in left in `AggregationPath`
but those will wait for a followup change.
disallow to specify percentile out of range [0,100]. This also fixes a problem in transform by failing
validation if an invalid percentile configuration is used.
Changes the misleading error message when attempting to open
a job while the "cluster.persistent_tasks.allocation.enable"
setting is set to "none" to a clearer message that names the
setting.
Closes#51956
Today we use `cluster.join.timeout` to prevent nodes from waiting indefinitely
if joining a faulty master that is too slow to respond, and
`cluster.publish.timeout` to allow a faulty master to detect that it is unable
to publish its cluster state updates in a timely fashion. If these timeouts
occur then the node restarts the discovery process in an attempt to find a
healthier master.
In the special case of `discovery.type: single-node` there is no point in
looking for another healthier master since the single node in the cluster is
all we've got. This commit suppresses these timeouts and instead lets the node
wait for joins and publications to succeed no matter how long this might take.
Previously, the dot-index rules (namely, that indices with dot-prefixed
names should be either hidden indices or system indices) was done
before* template application, and so only checked for the `index.hidden`
setting in the request, ignoring if that setting was set via a template.
This commit moves that check to a different method, which is applied
after templates have been resolved and applied to the index settings.
This commit fixes another edge case in handling windows newlines in our
capture of stdout/stderr to log4j. The case is that the \r appears at
the beginning of the buffer when flushing, which would unintentionally
be emitted as an empty string. This commit skips the flush if only a \r
was found.
closes#51838
Currently, the logic for looking up `flattened` field types lives in the
top-level `FieldTypeLookup`. This PR moves it into a dedicated class
`DynamicKeyFieldTypeLookup`.
Segment(s) info blobs are already stored with their full content
in the "hash" field in the shard snapshot metadata as long as they are
smaller than 1MB. We can make use of this fact and never upload them
physically to the repo.
This saves a non-trivial number of uploads and downloads when restoring
and might also lower the latency of searchable snapshots since they can save
phyiscally loading this information as well.
- Enable SunJGSS provider for Kerberos tests
- Handle the fact that in the decrypt method in KeyStoreWrapper might
not throw immediately when the GCM cipher is from BouncyCastle FIPS
and we end up with a DataInputStream that has reached it's end.
- Disable tests, jarHell, testingConventions for ingest attachment
plugin. We don't support this plugin (and document this) in FIPS
mode.
- Don't attempt to install ingest-attachment in smoke-test-plugins
This commit changes how RestHandlers are registered with the
RestController so that a RestHandler no longer needs to register itself
with the RestController. Instead the RestHandler interface has new
methods which when called provide information about the routes
(method and path combinations) that are handled by the handler
including any deprecated and/or replaced combinations.
This change also makes the publication of RestHandlers safe since they
no longer publish a reference to themselves within their constructors.
Closes#51622
Co-authored-by: Jason Tedor <jason@tedor.me>
Backport of #51950
We might leak a searcher if the target shard is removed (i.e., its index
is deleted) or relocated while we are creating a SearchContext from a
SearchRewriteContext.
Relates #51708Closes#52021
I labelled this non-issue for an unreleased bug introduced in #51708.
We can just put the `IndexId` instead of just the index name into the recovery soruce and
save one load of `RepositoryData` on each shard restore that way.
We need to either exclude null responses from the scroll search response
or always create a search context for every target shards, although that
scroll query can be written to match_no_docs. Otherwise, we won't find
search_context for subsequent scroll requests.
This commit implements the latter option as it's less error-prone.
Relates #51708
This change ensures that the rewrite of the shard request is executed in the network thread or in the refresh listener when waiting for an active shard. This allows queries that rewrite to match_no_docs to bypass the search thread pool entirely even if the can_match phase was skipped (pre_filter_shard_size > number of shards). Coordinating nodes don't have the ability to create empty responses so this change also ensures that at least one shard creates a full empty response while the other can return null ones. This is needed since creating true empty responses on shards require to create concrete aggregators which would be too costly to build on a network thread. We should move this functionality to aggregation builders in a follow up but that would be a much bigger change.
This change is also important for #49601 since we want to add the ability to use the result of other shards to rewrite the request of subsequent ones. For instance if the first M shards have their top N computed, the top worst document in the global queue can be pass to subsequent shards that can then rewrite to match_no_docs if they can guarantee that they don't have any document better than the provided one.
QueryBuilders that throw exceptions on shards when building the Lucene query
returns the full serialization of the query builder in the exception message.
For large queries that fails to execute due to the max boolean clause, this means
that we keep a reference of these big messages for every shard that participate
in the request. In order to limit the memory needed to hold these query shard
exceptions in the coordinating node, this change removes the query builder
serialization from the shard exception. The query is known by the user so
there should be no need to repeat it on every shard exception. We could also
omit the entire stack trace for known bad request exception but it would deserve
a separate issue/pr.
Closes#51843Closes#48910
When the `rare_terms` aggregation contained another aggregation it'd
break them. Most of the time. This happened because the process that it
uses to remove buckets that turn out not to be rare was incorrectly
merging results from multiple leaves. This'd cause array index out of
bounds issues. We didn't catch it in the test because the issue doesn't
happen on the very first bucket. And the tests generated data in such a
way that the first bucket always contained the rare terms. Randomizing
the order of the generated data fixed the test so it caught the issue.
Closes#51020
Currently, the same class `FieldCapabilities` is used both to represent the
capabilities for one index, and also the merged capabilities across indices. To
help clarify the logic, this PR proposes to create a separate class
`IndexFieldCapabilities` for the capabilities in one index. The refactor will
also help when adding `source_path` information in #49264, since the merged
source path field will have a different structure from the field for a single index.
Individual changes:
* Add a new class IndexFieldCapabilities.
* Remove extra constructor from FieldCapabilities.
* Combine the add and merge methods in FieldCapabilities.Builder.
Currently, a mappings update request, where dynamic_mappings is an object
instead of an array, results in a http response with a 500 code. This PR checks
for this condition and throws a MapperParsingException like we do for other
malformed mapping cases.
Closes#51486
ActionListener.completeWith would catch exceptions from
listener.onResponse and deliver them to lister.onFailure, essentially
double notifying the listener. Instead we now assert that listeners do
not throw when using ActionListener.completeWith.
Relates #50886
when a timezone is not provided Ingest logic should consider a time to be in a timezone provided as a parameter.
When a timezone is provided Ingest should recalculate a time to the timezone provided as a parameter
closes#51108
backport(#51215)
With the new mechanism for storing cluster state in lucene, we store
index metadata in multiple data paths too. This causes cluster state
publish to timeout too frequently with a 1s timeout, so increasing it to
5s. Also increasing follower check timeout to 5s since it also sometimes
has fsync in its timeout path and leader check for symmetry.
Closes#51329
While we use `== false` as a more visible form of boolean negation
(instead of `!`), the true case is implied and the true value does not
need to explicitly checked. This commit converts cases that have slipped
into the code checking for `== true`.
LoggingOutputStream reads a stream and breaks on newlines. This commit
fixes the behavior to account for windows newlines also containing `\r`.
closes#51532
Armin Braun
Nik Everett
Julie Tibshirani
Nhat Nguyen
Jay Modi
Marios Trivyzas
Ryan Ernst
Gordon Brown
Hendrik Muhs
David Roberts
Zachary Tong
Igor Motov
David Turner
David Kyle
Ignacio Vera
Alan Woodward
Ioannis Kakavas
Mark Vieira
Tanguy Leroux
Jim Ferenczi
Adrien Grand
Yannick Welsch
Maria Ralli
feifeiiiiiiiiii
Henning Andersen
Przemyslaw Gomulka
Noor