Firstly, backport the use of tini as the Docker entrypoint. This was supposed
to have been done following #50277, but was missed. It isn't a direct backport
as this branch will continue using root as the initial Docker user.
Secondly, backport #55491 to use the official checksums when downloading tini.
Backport of #55115.
Replace calls to deprecate(String,Object...) with deprecateAndMaybeLog(...),
with an appropriate key, so that all messages can potentially be deduplicated.
In bash, checking for whether an env variable exists uses the -z test,
against a stringified env var, so that the test is actually whether the
env var is empty, but not necessarily undefined. We use this to test
whether JAVA_HOME is set, to determine whether the bundled jdk should be
used. In windows, this test is an actual "undefined" check. This commit
brings the behavior on two systems in sync, opting to allow for an empty
JAVA_HOME in windows to indicate the bundled jdk should be used.
closes#55134
* Add ValuesSource Registry and associated logic (#54281)
* Remove ValuesSourceType argument to ValuesSourceAggregationBuilder (#48638)
* ValuesSourceRegistry Prototype (#48758)
* Remove generics from ValuesSource related classes (#49606)
* fix percentile aggregation tests (#50712)
* Basic thread safety for ValuesSourceRegistry (#50340)
* Remove target value type from ValuesSourceAggregationBuilder (#49943)
* Cleanup default values source type (#50992)
* CoreValuesSourceType no longer implements Writable (#51276)
* Remove genereics & hard coded ValuesSource references from Matrix Stats (#51131)
* Put values source types on fields (#51503)
* Remove VST Any (#51539)
* Rewire terms agg to use new VS registry (#51182)
Also adds some basic AggTestCases for untested code
paths (and boilerplate for future tests once the IT are
converted over)
* Wire Cardinality aggregation to work with the ValuesSourceRegistry (#51337)
* Wire Percentiles aggregator into new VS framework (#51639)
This required a bit of a refactor to percentiles itself. Before,
the Builder would switch on the chosen algo to generate an
algo-specific factory. This doesn't work (or at least, would be
difficult) in the new VS framework.
This refactor consolidates both factories together and introduces
a PercentilesConfig object to act as a standardized way to pass
algo-specific parameters through the factory. This object
is then used when deciding which kind of aggregator to create
Note: CoreValuesSourceType.HISTOGRAM still lives in core, and will
be moved in a subsequent PR.
* Remove generics and target value type from MultiVSAB (#51647)
* fix checkstyle after merge (#52008)
* Plumb ValuesSourceRegistry through to QuerySearchContext (#51710)
* Convert RareTerms to new VS registry (#52166)
* Wire up Value Count (#52225)
* Wire up Max & Min aggregations (#52219)
* ValuesSource refactoring: Wire up Sum aggregation (#52571)
* ValuesSource refactoring: Wire up SigTerms aggregation (#52590)
* Soft immutability for VSConfig (#52729)
* Unmute testSupportedFieldTypes, fix Percentiles/Ranks/Terms tests (#52734)
Also fixes Percentiles which was incorrectly specified to only accept
numeric, but in fact also accepts Boolean and Date (because those are
numeric on master - thanks `testSupportedFieldTypes` for catching it!)
* VS refactoring: Wire up stats aggregation (#52891)
* ValuesSource refactoring: Wire up string_stats aggregation (#52875)
* VS refactoring: Wire up median (MAD) aggregation (#52945)
* fix valuesourcetype issue with constant_keyword field (#53041)x-pack/plugin/rollup/src/main/java/org/elasticsearch/xpack/rollup/job/RollupIndexer.java
this commit implements `getValuesSourceType` for
the ConstantKeyword field type.
master was merged into feature/extensible-values-source
introducing a new field type that was not implementing
`getValuesSourceType`.
* ValuesSource refactoring: Wire up Avg aggregation (#52752)
* Wire PercentileRanks aggregator into new VS framework (#51693)
* Add a VSConfig resolver for aggregations not using the registry (#53038)
* Vs refactor wire up ranges and date ranges (#52918)
* Wire up geo_bounds aggregation to ValuesSourceRegistry (#53034)
This commit updates the geo_bounds aggregation to depend
on registering itself in the ValuesSourceRegistry
relates #42949.
* VS refactoring: convert Boxplot to new registry (#53132)
* Wire-up geotile_grid and geohash_grid to ValuesSourceRegistry (#53037)
This commit updates the geo*_grid aggregations to depend
on registering itself in the ValuesSourceRegistry
relates to the values-source refactoring meta issue #42949.
* Wire-up geo_centroid agg to ValuesSourceRegistry (#53040)
This commit updates the geo_centroid aggregation to depend
on registering itself in the ValuesSourceRegistry.
relates to the values-source refactoring meta issue #42949.
* Fix type tests for Missing aggregation (#53501)
* ValuesSource Refactor: move histo VSType into XPack module (#53298)
- Introduces a new API (`getBareAggregatorRegistrar()`) which allows plugins to register aggregations against existing agg definitions defined in Core.
- This moves the histogram VSType over to XPack where it belongs. `getHistogramValues()` still remains as a Core concept
- Moves the histo-specific bits over to xpack (e.g. the actual aggregator logic). This requires extra boilerplate since we need to create a new "Analytics" Percentile/Rank aggregators to deal with the histo field. Doubly-so since percentiles/ranks are extra boiler-plate'y... should be much lighter for other aggs
* Wire up DateHistogram to the ValuesSourceRegistry (#53484)
* Vs refactor parser cleanup (#53198)
Co-authored-by: Zachary Tong <polyfractal@elastic.co>
Co-authored-by: Zachary Tong <zach@elastic.co>
Co-authored-by: Christos Soulios <1561376+csoulios@users.noreply.github.com>
Co-authored-by: Tal Levy <JubBoy333@gmail.com>
* First batch of easy fixes
* Remove List.of from ValuesSourceRegistry
Note that we intend to have a follow up PR dealing with the mutability
of the registry, so I didn't even try to address that here.
* More compiler fixes
* More compiler fixes
* More compiler fixes
* Precommit is happy and so am I
* Add new Core VSTs to tests
* Disabled supported type test on SigTerms until we can backport it's fix
* fix checkstyle
* Fix test failure from semantic merge issue
* Fix some metaData->metadata replacements that got lost
* Fix list of supported types for MinAggregator
* Fix list of supported types for Avg
* remove unused import
Co-authored-by: Zachary Tong <polyfractal@elastic.co>
Co-authored-by: Zachary Tong <zach@elastic.co>
Co-authored-by: Christos Soulios <1561376+csoulios@users.noreply.github.com>
Co-authored-by: Tal Levy <JubBoy333@gmail.com>
Today we pass the `RepositoriesService` to the searchable snapshots plugin
during the initialization of the `RepositoryModule`, forcing the plugin to be a
`RepositoryPlugin` even though it does not implement any repositories.
After discussion we decided it best for now to pass this in via
`Plugin#createComponents` instead, pending some future work in which plugins
can depend on services more dynamically.
I've noticed that a lot of our tests are using deprecated static methods
from the Hamcrest matchers. While this is not a big deal in any
objective sense, it seems like a small good thing to reduce compilation
warnings and be ready for a new release of the matcher library if we
need to upgrade. I've also switched a few other methods in tests that
have drop-in replacements.
Currently forbidden apis accounts for 800+ tasks in the build. These
tasks are aggressively created by the plugin. In forbidden apis 3.0, we
will get task avoidance
(https://github.com/policeman-tools/forbidden-apis/pull/162), but we
need to ourselves use the same task avoidance mechanisms to not trigger
these task creations. This commit does that for our foribdden apis
usages, in preparation for upgrading to 3.0 when it is released.
Backport of #55073.
We added tasks to build an ARM distribution and Docker image, but didn't
provide any way to run packaging tests against them. Add extra loops on
the possible Architecture values, and skip tasks that can't be run on
the current Architecture.
Apply the :distribution:archives naming convention to some of the Docker
sub-projects, so that we have a more consistent naming scheme.
Also, we've seen some examples of Docker packaging tests failing sporadically
when they try to clean up the temp directory, citing a not-empty
directory. Ensure that any running container is removed before cleaning
up the temp dir, in an effort to avoid this problem.
This change converts the module and plugin parameters
for testClusters to be lazy. Meaning that the values
are not resolved until they are actually used. This
removes the requirement to use project.afterEvaluate to
be able to resolve the bundle artifact.
Note - this does not completely remove the need for afterEvaluate
since it is still needed for the custom resource extension.
This commit includes a number of changes to reduce overall build
configuration time. These optimizations include:
- Removing the usage of the 'nebula.info-scm' plugin. This plugin
leverages jgit to load read various pieces of VCS information. This
is mostly overkill and we have our own minimal implementation for
determining the current commit id.
- Removing unnecessary build dependencies such as perforce and jgit
now that we don't need them. This reduces our classpath considerably.
- Expanding the usage lazy task creation, particularly in our
distribution projects. The archives and packages projects create
lots of tasks with very complex configuration. Avoiding the creation
of these tasks at configuration time gives us a nice boost.
`scripted_metric` did not work with cross cluster search because it
assumed that you'd never perform a partial reduction, serialize the
results, and then perform a final reduction. That
serialized-after-partial-reduction step was broken.
This is also required to support #54758.
This is a simple naming change PR, to fix the fact that "metadata" is a
single English word, and for too long we have not followed general
naming conventions for it. We are also not consistent about it, for
example, METADATA instead of META_DATA if we were trying to be
consistent with MetaData (although METADATA is correct when considered
in the context of "metadata"). This was a simple find and replace across
the code base, only taking a few minutes to fix this naming issue
forever.
This drop the "top level" pipeline aggregators from the aggregation
result tree which should save a little memory and a few serialization
bytes. Perhaps more imporantly, this provides a mechanism by which we
can remove *all* pipelines from the aggregation result tree. This will
save quite a bit of space when pipelines are deep in the tree.
Sadly, doing this isn't simple because of backwards compatibility. Nodes
before 7.7.0 *need* those pipelines. We provide them by setting passing
a `Supplier<PipelineTree>` into the root of the aggregation tree that we
only call if we need to serialize to a version before 7.7.0.
This solution works for cross cluster search because we always reduce
the aggregations in each remote cluster and then forward them back to
the coordinating node. Its quite possible that the coordinating node
needs the pipeline (say it is version 7.1.0) and the gateway node in the
remote cluster doesn't (version 7.7.0). In that case the data nodes
won't send the pipeline aggregations back to the gateway node.
Critically, the gateway node *will* send the pipeline aggregations back
to the coordinating node. This is all managed with that
`Supplier<PipelineTree>`, but *how* it is managed is a bit tricky.
Currently the remote info api has added a number of possible fields
(proxy, num_socket_connections, etc) that are available in proxy mode.
These fields are not aligned with what the settings are named. This
commit modifies this API to align with the settings.
This commit changes the pre_filter_shard_size default from 128 to unspecified.
This allows to apply heuristics based on the request and the target indices when deciding
whether the can match phase should run or not. When unspecified, this pr runs the can match phase
automatically if one of these conditions is met:
* The request targets more than 128 shards.
* The request contains read-only indices.
* The primary sort of the query targets an indexed field.
Users can opt-out from this behavior by setting the `pre_filter_shard_size` to a static value.
Closes#39835
Backport of #53126.
Convert the Wildfly tests to run using Docker Compose. This drastically
simplifies the build setup, and will hopefully make the tests more
resilient.
It's simple to deprecate a field used in an ObjectParser just by adding deprecation
markers to the relevant ParseField objects. The warnings themselves don't currently
have any context - they simply say that a deprecated field has been used, but not
where in the input xcontent it appears. This commit adds the parent object parser
name and XContentLocation to these deprecation messages.
Note that the context is automatically stripped from warning messages when they
are asserted on by integration tests and REST tests, because randomization of
xcontent type during these tests means that the XContentLocation is not constant
* Fix feature flag setting for ComponentTemplate APIs (#53758)
The feature flag was set for *most* of the builds, but there are a couple where it was missing.
Resolves#53708
* Add skip for older versions of ES
If an index was created in version 6 and contain a date field with a joda-style pattern it should still be allowed to search and insert document into it.
Those created in 6 but date pattern starts with 8, should be considered as java style.
* Record Force Merges in live commit data
Prerequisite of #52182. Record force merges in the live commit data
so two shard states with the same sequence number that differ only in whether
or not they have been force merged can be distinguished when creating snapshots.
* Handle special chars in JAVA_HOME in elasticsearch-service.bat (#52676)
* Test case for windows service where JAVA_HOME path contains spaces (#53028)
Co-authored-by: Muhammad Shaheer Akram <41253927+shaheerakr@users.noreply.github.com>
Add `:qa:os` and `:benchmarks` to the list of automatically formatted
projects, and apply some manual fix-ups to polish it up.
In particular, I noticed that `Files.write(...)` when passed a list will
automaticaly apply a UTF-8 encoding and write a newline after each line,
making it easier to use than FileUtils.append. It's even available from
1.8.
Also, in the Allocators class, a number of methods declared thrown exceptions that IntelliJ reported were never thrown, and as far as I could see this is true, so I removed the exceptions.
Currently 3 remote cluster settings (ping interval, skip unavailable,
and compression) have a dependency on the seeds setting being
comfigured. With proxy mode, it is now possible that these settings the
seeds setting has not been configured. This commit removes this
dependency and adds new validation for these settings.
* Smarter copying of the rest specs and tests (#52114)
This PR addresses the unnecessary copying of the rest specs and allows
for better semantics for which specs and tests are copied. By default
the rest specs will get copied if the project applies
`elasticsearch.standalone-rest-test` or `esplugin` and the project
has rest tests or you configure the custom extension `restResources`.
This PR also removes the need for dozens of places where the x-pack
specs were copied by supporting copying of the x-pack rest specs too.
The plugin/task introduced here can also copy the rest tests to the
local project through a similar configuration.
The new plugin/task allows a user to minimize the surface area of
which rest specs are copied. Per project can be configured to include
only a subset of the specs (or tests). Configuring a project to only
copy the specs when actually needed should help with build cache hit
rates since we can better define what is actually in use.
However, project level optimizations for build cache hit rates are
not included with this PR.
Also, with this PR you can no longer use the includePackaged flag on
integTest task.
The following items are included in this PR:
* new plugin: `elasticsearch.rest-resources`
* new tasks: CopyRestApiTask and CopyRestTestsTask - performs the copy
* new extension 'restResources'
```
restResources {
restApi {
includeCore 'foo' , 'bar' //will include the core specs that start with foo and bar
includeXpack 'baz' //will include x-pack specs that start with baz
}
restTests {
includeCore 'foo', 'bar' //will include the core tests that start with foo and bar
includeXpack 'baz' //will include the x-pack tests that start with baz
}
}
```
Backport of #52525.
Closes#52503. Implement a list of `_FILE` env vars that will be used to
populate env vars with file content, instead of processing all `_FILE`
vars in the environment.
This commit modifies the codebase so that our production code uses a
single instance of the IndexNameExpressionResolver class. This change
is being made in preparation for allowing name expression resolution
to be augmented by a plugin.
In order to remove some instances of IndexNameExpressionResolver, the
single instance is added as a parameter of Plugin#createComponents and
PersistentTaskPlugin#getPersistentTasksExecutor.
Backport of #52596
* Refactor Inflexible Snapshot Repository BwC (#52365)
Transport the version to use for a snapshot instead of whether to use shard generations in the snapshots in progress entry. This allows making upcoming repository metadata changes in a flexible manner in an analogous way to how we handle serialization BwC elsewhere.
Also, exposing the version at the repository API level will make it easier to do BwC relevant changes in derived repositories like source only or encrypted.
The oss and default bats tests were removed, but these references to
them remained, causing gradle failures when trying to run packaging
tests. While the upgrade and plugins bats tests should still be tested,
that is being handled in #51565. This commit removes the outdated
references.
closes#51974
* Filter empty lines from docker ls response
In order to cut down on test time, our docker/vagrant tests build the
docker image outside of the vagrant VM. When we get around to launching
the Vagrant VM, we mount that already-built docker image to a known
location. At that point, we need to load the docker image. But we only
want to load it once. As we're running tests, we use "docker ls" to
check whether the local image is loaded for use. Empty output from the
particular ls invocation means no image is loaded.
There was a bug in how we checked this. In Java, splitting an empty
string will yield an array containing one empty string. So when we're
counting the output from the docker ls command, we need to filter out
empty lines in order to proceed to loading the image for docker tests.
This commit removes the need for DeprecatedRoute and ReplacedRoute to
have an instance of a DeprecationLogger. Instead the RestController now
has a DeprecationLogger that will be used for all deprecated and
replaced route messages.
Relates #51950
Backport of #52278
This commit converts the sysv init tests from bats tests into the java
packaging tests. Since it is the last oss specific test, the bats oss
test task is also removed.
relates #46005
- Enable SunJGSS provider for Kerberos tests
- Handle the fact that in the decrypt method in KeyStoreWrapper might
not throw immediately when the GCM cipher is from BouncyCastle FIPS
and we end up with a DataInputStream that has reached it's end.
- Disable tests, jarHell, testingConventions for ingest attachment
plugin. We don't support this plugin (and document this) in FIPS
mode.
- Don't attempt to install ingest-attachment in smoke-test-plugins
This commit changes how RestHandlers are registered with the
RestController so that a RestHandler no longer needs to register itself
with the RestController. Instead the RestHandler interface has new
methods which when called provide information about the routes
(method and path combinations) that are handled by the handler
including any deprecated and/or replaced combinations.
This change also makes the publication of RestHandlers safe since they
no longer publish a reference to themselves within their constructors.
Closes#51622
Co-authored-by: Jason Tedor <jason@tedor.me>
Backport of #51950
This commit introduces the ability to override JVM options by adding
custom JVM options files to a jvm.options.d directory. This simplifies
administration of Elasticsearch by not requiring administrators to keep
the root jvm.options file in sync with changes that we make to the root
jvm.options file. Instead, they are not expected to modify this file but
instead supply their own in jvm.options.d. In Docker installations, this
means they can bind mount this directory in. In future versions of
Elasticsearch, we can consider removing the root jvm.options file
(instead, providing all options there as system JVM options).
In the packaging tests, we added convenience methods for asserting file
existence and file non-existence. This commit replaces the remaining
uses of assertFalse/assertTrue in favor of these dedicated matchers.
Java 8 can not infer types as well as Java 11 does. This means a
backport of some code that relied on Java 11's superior abilities to
infer types caused Java 8's head to explode trying to infer the same
type in 7.x. This commit addresses this by giving Java 8 the types that
it needs.
The packaging tests like to assert that files exist or do not exist. We
do this with assertFalse and assertTrue which leads to useless assertion
messages, especially when asserting a file does not exist, but it does
and it is a directory. This commit helps with this situation by adding
dedicated matchers.
Adds more tests for the new "proxy" remote cluster connection mode, using a Docker-based
setup, as well as testing SNI-based routing using HAProxy.
- Checks that the new proxy mode can work in situations where the publish host of the nodes in
the remote cluster are not routable.
- Checks that the new proxy mode can work with clusters where nodes are hidden behind
HAProxy.
- Checks that the new proxy mode can work with clusters where nodes are hidden behind
HAProxy, using SNI to identify the nodes/cluster behind HAProxy.
Relates #49067
While we use `== false` as a more visible form of boolean negation
(instead of `!`), the true case is implied and the true value does not
need to explicitly checked. This commit converts cases that have slipped
into the code checking for `== true`.
testRecovery relies on the fact that shards are not flushed on inactive.
Our CI recently was too slow. It took more than 20 minutes to complete
the full cluster restart suite. This slowness caused some shards of
testRecovery were flushed on inactive.
This commit increases the inactive time to 1h to reduce this noise.
Closes#51640
* Reload secure settings with password (#43197)
If a password is not set, we assume an empty string to be
compatible with previous behavior.
Only allow the reload to be broadcast to other nodes if TLS is
enabled for the transport layer.
* Add passphrase support to elasticsearch-keystore (#38498)
This change adds support for keystore passphrases to all subcommands
of the elasticsearch-keystore cli tool and adds a subcommand for
changing the passphrase of an existing keystore.
The work to read the passphrase in Elasticsearch when
loading, which will be addressed in a different PR.
Subcommands of elasticsearch-keystore can handle (open and create)
passphrase protected keystores
When reading a keystore, a user is only prompted for a passphrase
only if the keystore is passphrase protected.
When creating a keystore, a user is allowed (default behavior) to create one with an
empty passphrase
Passphrase can be set to be empty when changing/setting it for an
existing keystore
Relates to: #32691
Supersedes: #37472
* Restore behavior for force parameter (#44847)
Turns out that the behavior of `-f` for the add and add-file sub
commands where it would also forcibly create the keystore if it
didn't exist, was by design - although undocumented.
This change restores that behavior auto-creating a keystore that
is not password protected if the force flag is used. The force
OptionSpec is moved to the BaseKeyStoreCommand as we will presumably
want to maintain the same behavior in any other command that takes
a force option.
* Handle pwd protected keystores in all CLI tools (#45289)
This change ensures that `elasticsearch-setup-passwords` and
`elasticsearch-saml-metadata` can handle a password protected
elasticsearch.keystore.
For setup passwords the user would be prompted to add the
elasticsearch keystore password upon running the tool. There is no
option to pass the password as a parameter as we assume the user is
present in order to enter the desired passwords for the built-in
users.
For saml-metadata, we prompt for the keystore password at all times
even though we'd only need to read something from the keystore when
there is a signing or encryption configuration.
* Modify docs for setup passwords and saml metadata cli (#45797)
Adds a sentence in the documentation of `elasticsearch-setup-passwords`
and `elasticsearch-saml-metadata` to describe that users would be
prompted for the keystore's password when running these CLI tools,
when the keystore is password protected.
Co-Authored-By: Lisa Cawley <lcawley@elastic.co>
* Elasticsearch keystore passphrase for startup scripts (#44775)
This commit allows a user to provide a keystore password on Elasticsearch
startup, but only prompts when the keystore exists and is encrypted.
The entrypoint in Java code is standard input. When the Bootstrap class is
checking for secure keystore settings, it checks whether or not the keystore
is encrypted. If so, we read one line from standard input and use this as the
password. For simplicity's sake, we allow a maximum passphrase length of 128
characters. (This is an arbitrary limit and could be increased or eliminated.
It is also enforced in the keystore tools, so that a user can't create a
password that's too long to enter at startup.)
In order to provide a password on standard input, we have to account for four
different ways of starting Elasticsearch: the bash startup script, the Windows
batch startup script, systemd startup, and docker startup. We use wrapper
scripts to reduce systemd and docker to the bash case: in both cases, a
wrapper script can read a passphrase from the filesystem and pass it to the
bash script.
In order to simplify testing the need for a passphrase, I have added a
has-passwd command to the keystore tool. This command can run silently, and
exit with status 0 when the keystore has a password. It exits with status 1 if
the keystore doesn't exist or exists and is unencrypted.
A good deal of the code-change in this commit has to do with refactoring
packaging tests to cleanly use the same tests for both the "archive" and the
"package" cases. This required not only moving tests around, but also adding
some convenience methods for an abstraction layer over distribution-specific
commands.
* Adjust docs for password protected keystore (#45054)
This commit adds relevant parts in the elasticsearch-keystore
sub-commands reference docs and in the reload secure settings API
doc.
* Fix failing Keystore Passphrase test for feature branch (#50154)
One problem with the passphrase-from-file tests, as written, is that
they would leave a SystemD environment variable set when they failed,
and this setting would cause elasticsearch startup to fail for other
tests as well. By using a try-finally, I hope that these tests will fail
more gracefully.
It appears that our Fedora and Ubuntu environments may be configured to
store journald information under /var rather than under /run, so that it
will persist between boots. Our destructive tests that read from the
journal need to account for this in order to avoid trying to limit the
output we check in tests.
* Run keystore management tests on docker distros (#50610)
* Add Docker handling to PackagingTestCase
Keystore tests need to be able to run in the Docker case. We can do this
by using a DockerShell instead of a plain Shell when Docker is running.
* Improve ES startup check for docker
Previously we were checking truncated output for the packaged JDK as
an indication that Elasticsearch had started. With new preliminary
password checks, we might get a false positive from ES keystore
commands, so we have to check specifically that the Elasticsearch
class from the Bootstrap package is what's running.
* Test password-protected keystore with Docker (#50803)
This commit adds two tests for the case where we mount a
password-protected keystore into a Docker container and provide a
password via a Docker environment variable.
We also fix a logging bug where we were logging the identifier for an
array of strings rather than the contents of that array.
* Add documentation for keystore startup prompting (#50821)
When a keystore is password-protected, Elasticsearch will prompt at
startup. This commit adds documentation for this prompt for the archive,
systemd, and Docker cases.
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
* Warn when unable to upgrade keystore on debian (#51011)
For Red Hat RPM upgrades, we warn if we can't upgrade the keystore. This
commit brings the same logic to the code for Debian packages. See the
posttrans file for gets executed for RPMs.
* Restore handling of string input
Adds tests that were mistakenly removed. One of these tests proved
we were not handling the the stdin (-x) option correctly when no
input was added. This commit restores the original approach of
reading stdin one char at a time until there is no more (-1, \r, \n)
instead of using readline() that might return null
* Apply spotless reformatting
* Use '--since' flag to get recent journal messages
When we get Elasticsearch logs from journald, we want to fetch only log
messages from the last run. There are two reasons for this. First, if
there are many logs, we might get a string that's too large for our
utility methods. Second, when we're looking for a specific message or
error, we almost certainly want to look only at messages from the last
execution.
Previously, we've been trying to do this by clearing out the physical
files under the journald process. But there seems to be some contention
over these directories: if journald writes a log file in between when
our deletion command deletes the file and when it deletes the log
directory, the deletion will fail.
It seems to me that we might be able to use journald's "--since" flag to
retrieve only log messages from the last run, and that this might be
less likely to fail due to race conditions in file deletion.
Unfortunately, it looks as if the "--since" flag has a granularity of
one-second. I've added a two-second sleep to make sure that there's a
sufficient gap between the test that will read from journald and the
test before it.
* Use new journald wrapper pattern
* Update version added in secure settings request
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
Co-authored-by: Ioannis Kakavas <ikakavas@protonmail.com>
When we get Elasticsearch logs from journald, we want to fetch only log
messages from the last run. There are two reasons for this. First, if
there are many logs, we might get a string that's too large for our
utility methods. Second, when we're looking for a specific message or
error, we almost certainly want to look only at messages from the last
execution.
Previously, we've been trying to do this by clearing out the physical
files under the journald process. But there seems to be some contention
over these directories: if journald writes a log file in between when
our deletion command deletes the file and when it deletes the log
directory, the deletion will fail.
Instead, we can use the cursor capablity of journald to retrieve journal
entries that occur only after a certain cursor. This avoids any effort
to interfere with the underlying file operations of journald.
Backport of #50927.
Closes#49653. When using _FILE environment variables to supply values
to Elasticsearch, following symlinks when checking that file permissions
are secure.
If some internal `.watcher` or so index gets created during these tests
then the shard counts on snapshot restores and creates won't match up with expectations.
Fixed by only creating the snapshot for the test index
Closes#50819
* Fix MultiVersionRepository BwC Tests
The HLRC doesn't like what its getting back from some older 6.x versions for the restore status
so I moved that request to the low level client.
Closes#50819
The chown utility for packaging tests works on windows when the given
path is a directory, but would fail if the path was a single file. This
commit fixes it to handle both cases.
relates #50825
This commit moves the packaging tests for elasticsearch-certgen
to java from bats. Although certgen is deprecated, the tests are
moved rather than just deleted, and the tests themselves should be
easily adaptable to certutil. One note is that the test is simplified to
use a single node, rather than the two node test from bats, which was
problematic given how the newer distro tests only operate with a single
distribution.
relates #46005
This commit adds retries for windows cleanup after tests, which may fail
due to file locks not being immediately released after a windows process
exits.
closes#50825
Follow up to #50692 that starts writing a `min_version` field to
the `RepositoryData` so that pre-7.6 ES versions can not read it
(and potentially corrupt it if they attempt to modify the repo contents)
after the repository moved to the new metadata format.
* Fix Snapshot Repository Corruption in Downgrade Scenarios (#50692)
This PR introduces test infrastructure for downgrading a cluster while interacting with a given repository.
It fixes the fact that repository metadata in the new format could be written while there's still older snapshots in the repository that require the old-format metadata to be restorable.
Today, the replica allocator uses peer recovery retention leases to
select the best-matched copies when allocating replicas of indices with
soft-deletes. We can employ this mechanism for indices without
soft-deletes because the retaining sequence number of a PRRL is the
persisted global checkpoint (plus one) of that copy. If the primary and
replica have the same retaining sequence number, then we should be able
to perform a noop recovery. The reason is that we must be retaining
translog up to the local checkpoint of the safe commit, which is at most
the global checkpoint of either copy). The only limitation is that we
might not cancel ongoing file-based recoveries with PRRLs for noop
recoveries. We can't make the translog retention policy comply with
PRRLs. We also have this problem with soft-deletes if a PRRL is about to
expire.
Relates #45136
Relates #46959
We need to make sure that the global checkpoints and peer recovery
retention leases were advanced to the max_seq_no and synced; otherwise,
we can risk expiring some peer recovery retention leases because of the
file-based recovery threshold.
Relates #49448
Fixes the muted test "testAutoExpandIndicesDuringRollingUpgrade". We can't wait in the test for
the index to be green, as we have put a filter exclusion into place that prevents all shards from
being allocated after a node rejoins. Instead we check whether the correct auto-expansion has
taken place.
Closes#50426
Follow-up to #48974 that ensures that replicas are only auto-expanded according to allocation
filtering rules once all nodes are upgraded to a version that supports this. Helps with
orchestrating cluster upgrades.
Follow-up to #48974 that ensures that replicas are only auto-expanded according to allocation
filtering rules once all nodes are upgraded to a version that supports this. Helps with
orchestrating cluster upgrades.
* Update remote cluster stats to support simple mode (#49961)
Remote cluster stats API currently only returns useful information if
the strategy in use is the SNIFF mode. This PR modifies the API to
provide relevant information if the user is in the SIMPLE mode. This
information is the configured addresses, max socket connections, and
open socket connections.
* Send hostname in SNI header in simple remote mode (#50247)
Currently an intermediate proxy must route conncctions to the
appropriate remote cluster when using simple mode. This commit offers
a additional mechanism for the proxy to route the connections by
including the hostname in the TLS SNI header.
* Rename the remote connection mode simple to proxy (#50291)
This commit renames the simple connection mode to the proxy connection
mode for remote cluster connections. In order to do this, the mode specific
settings which we namespaced by their mode (ex: sniff.seed and
proxy.addresses) have been reverted.
* Modify proxy mode to support a single address (#50391)
Currently, the remote proxy connection mode uses a list setting for the
proxy address. This commit modifies this so that the setting is
proxy_address and only supports a single remote proxy address.
We renamed README.textile to README.asciidoc but a bunch of tests and
the package build itself still pointed at the old name. This switches
them the new name.
Backport of #49612.
The current Docker entrypoint script picks up environment variables and
translates them into -E command line arguments. However, since any tool
executes via `docker exec` doesn't run the entrypoint, it results in
a poorer user experience.
Therefore, refactor the env var handling so that the -E options are
generated in `elasticsearch-env`. These have to be appended to any
existing command arguments, since some CLI tools have subcommands and
-E arguments must come after the subcommand.
Also extract the support for `_FILE` env vars into a separate script, so
that it can be called from more than once place (the behaviour is
idempotent).
Finally, add noop -E handling to CronEvalTool for parity, and support
`-E` in MultiCommand before subcommands.
Since 7.4, we switch from translog to Lucene as the source of history
for peer recoveries. However, we reduce the likelihood of
operation-based recoveries when performing a full cluster restart from
pre-7.4 because existing copies do not have PPRL.
To remedy this issue, we fallback using translog in peer recoveries if
the recovering replica does not have a peer recovery retention lease,
and the replication group hasn't fully migrated to PRRL.
Relates #45136
Running tools requires a shell. This should be the shell setup by the
base packaging tests, but currently tests must pass in their own shell.
This commit begins to make running tools easier by eliminating the shell
argument, instead keeping the shell as part of the Installation (which
can eventually be passed through from the test itself on installation).
The variable names for each tool are also simplified.
This refactor bridges some gaps between a long-running feature branch (#49268) and the master branch.
First of all, this PR gives our PackagingTestCase class some methods to start and stop Elasticsearch that will switch on packaging type and delegate to the appropriate utility class for deb/RPM packages, archive installations, and Docker. These methods should be very useful as we continue group tests by function rather than by package or platform type.
Second, the password-protected keystore tests have a particular need to read the output of Elasticsearch startup commands. In order to make this easer to do, some commands now return Shell.Result objects so that tests can check over output to the shell. To that end, there's also an assertElasticsearchFailure method that will handle checking for startup failures for the various distribution types.
There is an update to the Powershell startup script for archives that asynchronously redirects the output of the Powershell process to files that we can read for errors.
Finally, we use the ES_STARTUP_SLEEP_TIME environment variable to make sure that our startup commands wait long enough before exiting for errors to make it to the standard output and error streams.
When testing wildfly with Elasticsearch, we currently dump the wildfly
log if the test fails. However, when starting wildfly we may fail to
find the port number wildfly started on, and fail with no output. This
change dumps the wildflog log when failing to find the http or
management ports.
relates #49374
Backport of #49079. Reimplement a number of the tests from
elastic/elasticsearch-docker.
There is also one Docker image fix here, which is that two of the provided
config files had different file permissions to the rest. I've fixed this
with another RUN chmod while building the image, and adjusted the
corresponding packaging test.
This change adds a dynamic cluster setting named `indices.id_field_data.enabled`.
When set to `false` any attempt to load the fielddata for the `_id` field will fail
with an exception. The default value in this change is set to `false` in order to prevent
fielddata usage on this field for future versions but it will be set to `true` when backporting
to 7x. When the setting is set to true (manually or by default in 7x) the loading will also issue
a deprecation warning since we want to disallow fielddata entirely when https://github.com/elastic/elasticsearch/issues/26472
is implemented.
Closes#43599
This commit moves the packaging tests for elasticsearch-setup-passwords
to java from bats. The change also enables future tests to enable
security in Elasticsearch and automatically have waitForElasticsearch
work correctly, at least to the same extent it worked in bats, by
waiting on the ES port instead of health check.
relates #46005
Fix reference about the uid:gid that Elasticsearch runs as inside
the Docker container and add a packaging test to ensure that bind
mounting a data dir with a random uid and gid:0 works as
expected.
Backport of #49529Closes#47929
This commit fixes#49587. Due to a settings change, the broken test was
asserting on the incorrect setting. This commit fixes that issue and
adds additional assertions to ensure that all settings are working
properly.
Hendrik Muhs
Igor Motov
Rory Hunter
Ryan Ernst
Mark Tozzi
David Turner
William Brafford
Jake Landis
Mark Vieira
Nik Everett
Jason Tedor
Tim Brooks
Jim Ferenczi
Lee Hinman
Alan Woodward
Przemyslaw Gomulka
Armin Braun
William Brafford
Nhat Nguyen
David Roberts
Jay Modi
Ryan Ernst
Ioannis Kakavas
Yannick Welsch
Christoph Büscher
Dimitrios Liappis