Everything that extended `AbstractAsyncBulkByScrollAction` also
extended `AbstractAsyncBulkIndexByScrollAction` so this removes
`AbstractAsyncBulkIndexByScrollAction`, merging it into
`AbstractAsyncBulkByScrollAction`.
Changes the error message when `action.auto_create_index` or
`index.mapper.dynamic` forbids automatic creation of an index
from `no such index` to one of:
* `no such index and [action.auto_create_index] is [false]`
* `no such index and [index.mapper.dynamic] is [false]`
* `no such index and [action.auto_create_index] contains [-<pattern>] which forbids automatic creation of the index`
* `no such index and [action.auto_create_index] ([all patterns]) doesn't match`
This should make it more clear *why* there is `no such index`.
Closes#22435
Today we do not preserve response headers if they are present on a transport protocol
response. While preserving these headers is not always desired, in the most cases we
should pass on these headers to have consistent results for depreciation headers etc.
yet, this hasn't been much of a problem since most of the deprecations are detected early
ie. on the coordinating node such that this bug wasn't uncovered until #22647
This commit allow to optionally preserve headers when a context is restored and also streamlines
the context restore since it leaked frequently into the callers thread context when the callers
context wasn't restored again.
Instead of forcing each task to register all nodes where its children are running, this commit runs cancellation on all nodes. The task cancellation operation doesn't run too frequently, so this optimization doesn't seem to be worth additional complexity of the interface.
Previously, certain settings that could take multiple comma delimited
values would pick up incorrect values for all entries but the first if
each comma separated value was followed by a whitespace character. For
example, the multi-value "A,B,C" would be correctly parsed as
["A", "B", "C"] but the multi-value "A, B, C" would be incorrectly parsed
as ["A", " B", " C"].
This commit allows a comma separated list to have whitespace characters
after each entry. The specific settings that were affected by this are:
cluster.routing.allocation.awareness.attributes
index.routing.allocation.require.*
index.routing.allocation.include.*
index.routing.allocation.exclude.*
cluster.routing.allocation.require.*
cluster.routing.allocation.include.*
cluster.routing.allocation.exclude.*
http.cors.allow-methods
http.cors.allow-headers
For the allocation filtering related settings, this commit also provides
validation of each specified entry if the filtering is done by _ip,
_host_ip, or _publish_ip, to ensure that each entry is a valid IP
address.
Closes#22297
This commit tries to simplify the way ElasticsearchException are rendered to xcontent. It adds some documentation and renames and merges some methods. Current behavior is preserved, the goal is to be more readable and centralize everything in the ElasticsearchException class.
Today we have quite some abstractions that are essentially providing a simple
dispatch method to the plugins defining a `HttpServerTransport`. This commit
removes `HttpServer` and `HttpServerAdaptor` and introduces a simple `Dispatcher` functional
interface that delegate to `RestController` by default.
Relates to #18482
The IndexingOperationListener interface did not provide any
information about the shard id when a document was indexed.
This commit adds the shard id as the first parameter to all methods
in the IndexingOperationListener.
This is related to #22116. netty channels require socket `connect` and
`accept` privileges. Netty does not currently wrap these operations
with `doPrivileged` blocks. These changes extend the netty channels
and wrap calls to the relevant super methods in doPrivileged blocks.
Adds a message about how the remote is unlikely to be Elasticsearch.
This isn't as good as including the whole message from the remote but
we can't do that because we are stream parsing it and we don't want
to mark the whole request.
Closes#22330
Moves fetching the local node id into `NodeClient` which is a
fairly useful place to put it so you can generate task ids from
`NodeClient#executeLocally`.
It is no longer needed. It used to contain a lot of strings
used by serialization but those have since been removed. Now
it is just another thing to pass around that we don't really
need.
Reindex-from-remote had a race when it tried to clear the scroll. It
first starts the request to clear the scroll and then submits a task
to the generic threadpool to shutdown the client. These two things
race and, in my experience, closing the scroll generally loses. That
means that most of the time reindex-from-remote isn't clearing the
scrolls that it uses. This isn't the end of the world because we
flush old scroll contexts after a while but this isn't great.
Noticed while experimenting with #22514.
Reindex-from-remote was accepting source filtering in the request
but ignoring it and setting `_source=true` on the search URI. This
fixes the filtering so it is piped through to the remote node and
adds tests for that.
Closes#22507
Removes `AggregatorParsers`, replacing all of its functionality with
`XContentParser#namedObject`.
This is the third bit of payoff from #22003, one less thing to pass
around the entire application.
If the remote doesn't return a content type then reindex
tried to guess the content-type. This didn't work most
of the time and produced a rather useless error message.
Given that Elasticsearch always returns the content-type
we are dropping content-type detection in favor of just
failing the request if the remote didn't return a content-type.
Closes#22329
1. Escape sequences we're working. For example `\\` is now correctly
interpreted as `\` instead of `\\`. Same with `\'` being `'` and
`\"` being `"`.
2. `'` delimited strings weren't allowed to contain `"`s but it looked
like they were intended to support it. Now they do.
3. Improves the error message when the script contains an invalid
escape sequence inside a string to include a list of the valid
escape sequences.
Closes#22372
This integrates the mocksocket jar with elasticsearch tests. Mocksocket wraps actions requiring SocketPermissions in doPrivilege blocks. This will eventually allow SocketPermissions to be assigned to the mocksocket jar opposed to the entire elasticsearch codebase.
We previously named the thread using a frame from the stack trace, but
this was removed to simplify the code here. However, the comment
explaining this was left behind and this commit cleans that up.
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
As the translog evolves towards a full operations log as part of the
sequence numbers push, there is a need for the translog to be able to
represent operations for which a sequence number was assigned, but the
operation did not mutate the index. Examples of how this can arise are
operations that fail after the sequence number is assigned, and gaps in
this history that arise when an operation is assigned a sequence number
but the operation never completed (e.g., a node crash). It is important
that these operations appear in the history so that they can be
replicated and replayed during recovery as otherwise the history will be
incomplete and local checkpoints will not be able to advance. This
commit introduces a no-op to the translog to set the stage for these
efforts.
Relates #22291
Introduces `XContentParser#namedObject which works a little like
`StreamInput#readNamedWriteable`: on startup components register
parsers under names and a superclass. At runtime we look up the
parser and call it to parse the object.
Right now the parsers take a context object they use to help with
the parsing but I hope to be able to eliminate the need for this
context as most what it is used for at this point is to move
around parser registries which should be replaced by this method
eventually. I make no effort to do so in this PR because it is
big enough already. This is meant to the a start down a road that
allows us to remove classes like `QueryParseContext`,
`AggregatorParsers`, `IndicesQueriesRegistry`, and
`ParseFieldRegistry`.
The goal here is to reduce the amount of plumbing required to
allow parsing pluggable things. With this you don't have to pass
registries all over the place. Instead you must pass a super
registry to fewer places and use it to wrap the reader. This is
the same tradeoff that we use for NamedWriteable and it allows
much, much simpler binary serialization. We think we want that
same thing for xcontent serialization.
The only parsing actually converted to this method is parsing
`ScoreFunctions` inside of `FunctionScoreQuery`. I chose this
because it is relatively self contained.
It looks like the exception reason can differ in different default
locales, so the build would fail in any non-English locale. This
switches the catch to the name of the exception which shouldn't
vary.
We are currenlty checking that no deprecation warnings are emitted in our query tests. That can be moved to ESTestCase (disabled in ESIntegTestCase) as it allows us to easily catch where our tests use deprecated features and assert on the expected warnings.
We return deprecation warnings as response headers, besides logging them. Strict parsing mode stayed around, but was only used in query tests, though we also introduced checks for deprecation warnings there that don't need strict parsing anymore (see #20993).
We can then safely remove support for strict parsing mode. The final goal is to remove the ParseFieldMatcher class, but there are many many users of it. This commit prepares the field for the removal, by deprecating ParseFieldMatcher and making it effectively not needed. Strict parsing is removed from ParseFieldMatcher, and strict parsing is replaced in tests where needed with deprecation warnings checks.
Note that the setting to enable strict parsing was never ported to the new settings infra hance it cannot be set in production. It is really only used in our own tests.
Relates to #19552
This commit makes mapping updates atomic when multiple types in an index are updated. Mappings for an index are now applied in a single atomic operation, which also allows to optimize some of the cross-type updates and checks.
In #22094 we introduce a test-only setting to simulate transport
impls that don't support handshakes. This commit implements the same logic
without a setting.
The JSON processor has an optional field called "target_field".
If you don't specify target_field then target_field becomes what you specified as "field".
There isn't anyway to add the fields to the root of a document. By
setting `add_to_root`, now serialized fields will be inserted into the
top-level fields of the ingest document.
Closes#21898.
Today we initialize Netty in a static initializer. We trigger this
method via static initializers from Netty-related classes, but we can
trigger this method earlier than we do to ensure that Netty is
initialized how we want it to be.
Inline scripts defined in Ingest Pipelines are now compiled at creation time to preemptively catch errors on initialization of the pipeline.
Fixes#21842.
Low level handshake code doesn't handle situations gracefully if the connection
is concurrently closed or reset by peer. This commit adds the relevant code to
fail the handshake if the connection is closed.
Moves the last of the "easy" parser construction into
`RestRequest`, this time with a new method
`RestRequest#contentParser`. The rest of the production
code that builds `XContentParser` isn't "easy" because it is
exposed in the Transport Client API (a Builder) object.
The creation of the `ValuesSource` used to pass `DateTimeZone.UTC` as a time
zone all the time in case of empty fields in spite of the fact that all doc
value formats but the date one reject this parameter.
This commit centralizes the creation of the `ValuesSource` and adds unit tests
to it.
Closes#22009
With this commit we enable the Jackson feature 'STRICT_DUPLICATE_DETECTION'
by default. This ensures that JSON keys are always unique. While this has
a performance impact, benchmarking has indicated that the typical drop in
indexing throughput is around 1 - 2%.
As a last resort, we allow users to still disable strict duplicate checks
by setting `-Des.json.strict_duplicate_detection=false` which is
intentionally undocumented.
Closes#19614
Grok was originally ignoring potential matches to named-capture groups
larger than one. For example, If you had two patterns containing the
same named field, but only the second pattern matched, it would fail to
pick this up.
This PR fixes this by exploring all potential places where a
named-capture was used and chooses the first one that matched.
Fixes#22117.
Today we rely on the version that the API user passes in together with the DiscoveryNode. This commit introduces a low level handshake where nodes exchange their version to be used with the transport protocol that is executed every time a connection to a node is established. This, on the one hand allows to change the wire protocol based on the version we are talking to even without a full cluster restart. Today we would need to carry on a BWC layer across major versions but with a handshake we can rely on the fact that the latest version of the previous minor executes a handshake and uses the latest protocol version across all communication with the N+1 version nodes.
This change is yet fully backwards compatible, a followup PR will remove the BWC in 6.0 once this has been back-ported to the 5.x branch
This class is just a wrapper around `SearchContext`, so let's use
`SearchContext` directly. The change is mechanical, except the
`ValuesSourceConfig` class, where I moved the logic to get a `ValuesSource`
given a config.
Our query DSL supports empty queries (`{}`), which have a different meaning depending on the query that holds it, either ignored, match_all or match_none. We deprecated the support for empty queries in 5.0, where we log a deprecation warning wherever they are used.
The way we supported it once we moved query parsing to the coordinating node was having an Optional<QueryBuilder> return type in all of our parse methods (called fromXContent). See #17624. The central place for this was QueryParseContext#parseInnerQueryBuilder. We can now remove all the optional return types and simply throw an exception whenever an empty query is found.
Today we connect and publish the nodes connection before we execute a
handshake with the node we connect to. In the case of connecting to a node
that won't pass the handshake this connection is already `published` and other
code paths can use it. This commit detaches the connection and the publish of the
connection such that `TransportService` can do a handshake before actually connect
and publish the connection.
To get #22003 in cleanly we need to centralize as much `XContentParser` creation as possible into `RestRequest`. That'll mean we have to plumb the `NamedXContentRegistry` into fewer places.
This removes `RestAction.hasBody`, `RestAction.guessBodyContentType`, and `RestActions.getRestContent`, moving callers over to `RestRequest.hasContentOrSourceParam`, `RestRequest.contentOrSourceParam`, and `RestRequest.contentOrSourceParamParser` and `RestRequest.withContentOrSourceParamParserOrNull`. The idea is to use `withContentOrSourceParamParserOrNull` if you need to handle requests without any sort of body content and to use `contentOrSourceParamParser` otherwise.
I believe the vast majority of this PR to be purely mechanical but I know I've made the following behavioral change (I'll add more if I think of more):
* If you make a request to an endpoint that requires a request body and has cut over to the new APIs instead of getting `Failed to derive xcontent` you'll get `Body required`.
* Template parsing is now non-strict by default. This is important because we need to be able to deprecate things without requests failing.
If you try to close the rest client inside one of its callbacks then
it blocks itself. The thread pool switches the status to one that
requests a shutdown and then waits for the pool to shutdown. When
another thread attempts to honor the shutdown request it waits
for all the threads in the pool to finish what they are working on.
Thus thread a is waiting on thread b while thread b is waiting
on thread a. It isn't quite that simple, but it is close.
Relates to #22027
This is an attempt to start moving aggs parsing to `ObjectParser`. There is
still A LOT to do, but ObjectParser is way better than the way aggregations
parsing works today. For instance in most cases, we reject numbers that are
provided as strings, which we are supposed to accept since some client languages
(looking at you Perl) cannot make sure to use the appropriate types.
Relates to #22009
* Remove 2.0 prerelease version constants
This is a start to addressing #21887. This removes:
* pre 2.0 snapshot format support
* automatic units addition to cluster settings
* bwc check for delete by query in pre 2.0 indexes
This adds the `_primary_term` field internally to the mappings. This field is
populated with the current shard's primary term.
It is intended to be used for collision resolution when two document copies have
the same sequence id, therefore, doc_values for the field are stored but the
filed itself is not indexed.
This also fixes the `_seq_no` field so that doc_values are retrievable (they
were previously stored but irretrievable) and changes the `stats` implementation
to more efficiently use the points API to retrieve the min/max instead of
iterating on each doc_value value. Additionally, even though we intend to be
able to search on the field, it was previously not searchable. This commit makes
it searchable.
There is no user-visible `_primary_term` field. Instead, the fields are
updated by calling:
```java
index.parsedDoc().updateSeqID(seqNum, primaryTerm);
```
This includes example methods in `Versions` and `Engine` for retrieving the
sequence id values from the index (see `Engine.getSequenceID`) that are only
used in unit tests. These will be extended/replaced by actual implementations
once we make use of sequence numbers as a conflict resolution measure.
Relates to #10708
Supercedes #21480
P.S. As a side effect of this commit, `SlowCompositeReaderWrapper` cannot be
used for documents that contain `_seq_no` because it is a Point value and SCRW
cannot wrap documents with points, so the tests have been updated to loop
through the `LeafReaderContext`s now instead.
This adds a fromXContent method and unit test to the HighlightField class so we
can parse it as part of a serch response. This is part of the preparation for
parsing search responses on the client side.
`_update_by_query` supports specifying the `pipeline` to process the
documents as a url parameter but `_reindex` doesn't. It doesn't because
everything about the `_reindex` request that has to do with writing
the documents is grouped under the `dest` object in the request body.
This changes the response parameter from
`request [_reindex] contains unrecognized parameter: [pipeline]` to
`_reindex doesn't support [pipeline] as a query parmaeter. Specify it in the [dest] object instead.`
Action filters currently have the ability to filter both the request and
response. But the response side was not actually used. This change
removes support for filtering responses with action filters.
Changes the default socket and connection timeouts for the rest
client from 10 seconds to the more generous 30 seconds.
Defaults reindex-from-remote to those timeouts and make the
timeouts configurable like so:
```
POST _reindex
{
"source": {
"remote": {
"host": "http://otherhost:9200",
"socket_timeout": "1m",
"connect_timeout": "10s"
},
"index": "source",
"query": {
"match": {
"test": "data"
}
}
},
"dest": {
"index": "dest"
}
}
```
Closes#21707
I added an assertion to Netty4/Netty3Transport in 5.x that is not in
master yet. This commit port the assert to ensure we consumed all connection
in `connectToChannels`
We don't use the test infra nor do we run the tests. They might all be
entirely out of date. We also have a different BWC test infra in-place.
This change removes all of the legacy infra.
Timeouts are global today across all connections this commit allows to specify
a connection timeout per node such that depending on the context connections can
be established with different timeouts.
Relates to #19719
We currently treat every node equally when we establish connections to a node.
Yet, if we are not master eligible or can't hold any data there is no point in creating
a dedicated connection for sending the cluster state or running remote recoveries respectively.
The usage of STATE and RECOVERY connections on non-master and/or non-data nodes will result in an IllegalStateException.
For the record, I also had to remove the geo-hash cell and geo-distance range
queries to make the code compile. These queries already throw an exception in
all cases with 5.x indices, so that does not hurt any more.
I also had to rename all 2.x bwc indices from `index-${version}` to
`unsupported-${version}` to make `OldIndexBackwardCompatibilityIT`
happy.
SearchTemplateRequest to implement CompositeIndicesRequest
Given that SearchTemplateRequest effectively delegates to search when a search is being executed, it should implement the CompositeIndicesRequest interface. The subrequests method should return a single search request. When a search is not going to be executed, because we are in simulate mode, there are no inner requests, and there are no corresponding indices to that request either.
Closes#21747
Set lucene version to 6.4.0-snapshot-ec38570 and update all the sha1s/license
Fix invalid combo after upgrade in query_string query. split_on_whitespace=false is disallowed if auto_generate_phrase_queries=true
Adapt the expectations of some tests to the new format of the Lucene explain output
Lucene 6.2 added index and query support for numeric ranges. This commit adds a new RangeFieldMapper for indexing numeric (int, long, float, double) and date ranges and creating appropriate range and term queries. The design is similar to NumericFieldMapper in that it uses a RangeType enumerator for implementing the logic specific to each type. The following range types are supported by this field mapper: int_range, float_range, long_range, double_range, date_range.
Lucene does not provide a DocValue field specific to RangeField types so the RangeFieldMapper implements a CustomRangeDocValuesField for handling doc value support.
When executing a Range query over a Range field, the RangeQueryBuilder has been enhanced to accept a new relation parameter for defining the type of query as one of: WITHIN, CONTAINS, INTERSECTS. This provides support for finding all ranges that are related to a specific range in a desired way. As with other spatial queries, DISJOINT can be achieved as a MUST_NOT of an INTERSECTS query.
The Transport#connectToNodeLight concepts is confusing and not very flexible.
neither really testable on a unittest level. This commit cleans up the code used
to connect to nodes and simplifies transport implementations to share more code.
This also allows to connect to nodes with custom profiles if needed, for instance
future improvements can be added to connect to/from nodes that are non-data nodes without
dedicated bulks and recovery connections.
When Netty listens on a socket, it specifies the established connection
backlog for the socket. On Linux, Netty tries to read the system-wide
configuration for this from /proc/sys/net/core/somaxconn and falls back
to a default value when it can not read this value. This commit grants
Netty permission to read this file so that it can honor the system-wide
configuration for the connection backlog for sockets that it is
listening on. This also removes an obnoxious stack trace that appears
when Netty logging is set to debug logging.
Relates #21840
In the past we ran yaml tests against an internal cluster, which would get restarted after each test failure, hence the client objects needed to eventually be refreshed before each test. That is why we had the initClient method to re-initialize the YamlTestClient in the execution context. We ended up though re-initializing the client unconditionally, which is not needed.
Also, ESRestTestCase recreates the RestClient against the external cluster before each test, which is not needed given that nothing changes in the external cluster.
This commit removes the initClient method from the yaml tests execution context. The YamlTestClient can be eagerly created before the first yaml test runs and then re-used in subsequent tests. Also api calls to check for nodes versions etc. are moved out of YamlTestClient to ESClientYamlSuiteTestCase. Also the RestClient is now initialized in ESRestTestCase before the first test runs, and kept around afterwards as a static member.
Basically each subclass of EsRestTestCase will have its own RestClient instance, but the client will be shared across the different tests within the same class. The yaml test suite is just a special suite, composed of 600+ tests that are loaded from files, which will share the same client instance.
This change should speed tests up as well, as we don't recreate the RestClient before each single test, and we don't call _cat/nodes either before each single test.
This commit simplifies the handling of fatal errors on the network
layer. The simplification here is to remove the use of a
StringWriter/PrintWriter pair to format the stack trace, removing the
need for the method to declare that it throws a checked IOException.
If a bug occurs in painless compilation (not from a user, but from the
painless infrastructure), a VerifyError may be thrown when compiling the
broken generated class. This commit wraps VerifyErrors in
ScriptException so that useful information is returned to the user,
which can be passed on to the ES team for analysis.
This bug would cause a VerifyError when scripts using the === operator
were comparing a def type against a primitive type since the primitive
type wasn't being appropriately boxed.
Today when handling unreleased versions for backwards compatilibity
support, we scatted version constants across the code base and add some
asserts to support removing these constants when the version in question
is actually released. This commit improves this situation, enabling us
to just add a single unreleased version constant that can be renamed
when the version is actually released. This should make maintenance of
these versions simpler.
Relates #21760
NOTE: The result of `?.` and `?:` can't be assigned to primitives. So
`int[] someArray = null; int l = someArray?.length` and
`int s = params.size ?: 100` don't work. Do
`def someArray = null; def l = someArray?.length` and
`def s = params.size ?: 100` instead.
Relates to #21748
* Scripting: Remove groovy scripting language
Groovy was deprecated in 5.0. This change removes it, along with the
legacy default language infrastructure in scripting.
You can use `Debug.explain(someObject)` in painless to throw an
`Error` that can't be caught by painless code and contains an
object's class. This is useful because painless's sandbox doesn't
allow you to call `someObject.getClass()`.
Closes#20263
When a fatal error is thrown on the network layer, such an error never
makes its way to the uncaught exception handler. This prevents the node
from being torn down if an out of memory error or other fatal error is
thrown while handling HTTP or transport traffic. This commit adds logic
to ensure that such errors bubble their way up to the uncaught exception
handler, even though Netty tries really hard to swallow everything.
Relates #21720
This should make debugging painless' analysis and code generation a
little easier.
The `toString` implementations mirror the AST somewhat, and look like
`(SSource (SReturn (ENumeric 1)))`.
Today we read a vint from the stream to allocate the size of an array up-front
before we start reading the values. This can be dangerous if for instance we read
from a corrupted stream or if some manipulated bytes are send for instance from
an attacker or a fuzzer. In most of the cases we can apply some best effort and
validate the array size to be _sane_ by ensuring we can at read at least N bytes
where N is the expected size of the array.
When Groovy detects a bug in its runtime because an internal assertion
was violated, it throws an GroovyBugError. This descends from
AssertionError and if it goes uncaught will land in the uncaught
exception handler and will not deliver any useful information to the
user. This commit wraps GroovyBugErrors in ScriptExceptions so that
useful information is returned to the user.
Implements a null coalescing operator in painless that looks like `?:`. This form was chosen to emulate Groovy's `?:` operator. It is different in that it only coalesces null values, instead of Groovy's `?:` operator which coalesces all falsy values. I believe that makes it the same as Kotlin's `?:` operator. In other languages this operator looks like `??` (C#) and `COALESCE` (SQL) and `:-` (bash).
This operator is lazy, meaning the right hand side is only evaluated at all if the left hand side is null.
This commit exposes the executor service interface from thread
pool. This will enable some high-level concurrency primitives that will
make some code cleaner and simpler.
Relates #21608
We kept `netty_3` as a fallback in the 5.x series but now that master
is 6.0 we don't need this or in other words all issues coming up with
netty 4 will be blockers for 6.0.
* master: (22 commits)
Add proper toString() method to UpdateTask (#21582)
Fix `InternalEngine#isThrottled` to not always return `false`. (#21592)
add `ignore_missing` option to SplitProcessor (#20982)
fix trace_match behavior for when there is only one grok pattern (#21413)
Remove dead code from GetResponse.java
Fixes date range query using epoch with timezone (#21542)
Do not cache term queries. (#21566)
Updated dynamic mapper section
Docs: Clarify date_histogram bucket sizes for DST time zones
Handle release of 5.0.1
Fix skip reason for stats API parameters test
Reduce skip version for stats API parameter tests
Strict level parsing for indices stats
Remove cluster update task when task times out (#21578)
[DOCS] Mention "all-fields" mode doesn't search across nested documents
InternalTestCluster: when restarting a node we should validate the cluster is formed via the node we just restarted
Fixed bad asciidoc in boolean mapping docs
Fixed bad asciidoc ID in node stats
Be strict when parsing values searching for booleans (#21555)
Fix time zone rounding edge case for DST overlaps
...
There is an issue in the Grok Processor, where trace_match: true does not inject the _ingest._grok_match_index into the ingest-document when there is just one pattern provided. This is due to an optimization in the regex construction. This commit adds a check for when this is the case, and injects a static index value of "0", since there is only one pattern matched (at the first index into the patterns).
To make this clearer, more documentation was added to the grok-processor docs.
Fixes#21371.
* master:
Hack around cluster service and logging race
Do not prematurely shutdown Log4j
Support decimal constants with trailing [dD] in painless (#21412)
In painless suggest a long constant if int won't do (#21415)
Account for different paths for sysctl utilities
[TEST] testRebalancePossible() may not have an assigned node id
Tests: Disable merge in SearchCancellationTests
Tests: clean search scroll at the end of SearchCancellationIT
This adds support to painless for decimal constants with trailing `d` or
`D` to make it compatible with Java. It already supported integer
constants with a trailing `d` or `D` but this adds tests for it.
Closes#21116
In painless we prefer explicit types over implicit ones whereas
groovy is the other way around. Take this groovy code:
```
> 86400000.class
java.lang.Integer
> 864000000000.class
java.lang.Long
```
Painless accepts `86400000` just fine because that is a valid `int`
in the jvm. It rejects `864000000000` as an invlid `int` constant
because, in painless as in java, `long` constants always end in `L`
or `l`.
To ease the transition from groovy to painless, this changes the
compilation error returned from these invalid constants from:
```
Invalid int constant [864000000000].
```
to
```
Invalid int constant [864000000000]. If you want a long constant then change it to [864000000000L].
```
Inspired by #21313
* master: (516 commits)
Avoid angering Log4j in TransportNodesActionTests
Add trace logging when aquiring and releasing operation locks for replication requests
Fix handler name on message not fully read
Remove accidental import.
Improve log message in TransportNodesAction
Clean up of Script.
Update Joda Time to version 2.9.5 (#21468)
Remove unused ClusterService dependency from SearchPhaseController (#21421)
Remove max_local_storage_nodes from elasticsearch.yml (#21467)
Wait for all reindex subtasks before rethrottling
Correcting a typo-Maan to Man-in README.textile (#21466)
Fix InternalSearchHit#hasSource to return the proper boolean value (#21441)
Replace all index date-math examples with the URI encoded form
Fix typos (#21456)
Adapt ES_JVM_OPTIONS packaging test to ubuntu-1204
Add null check in InternalSearchHit#sourceRef to prevent NPE (#21431)
Add VirtualBox version check (#21370)
Export ES_JVM_OPTIONS for SysV init
Skip reindex rethrottle tests with workers
Make forbidden APIs be quieter about classpath warnings (#21443)
...
In the test for reindex and friend's rethrottling feature we were waiting
only for a single reindex sub task to start before rethrottling. This
mostly worked because starting tasks is fast. But it didn't *always work
and CI found that for us. This fixes the test to wait for all subtasks
to start before rethrottling.
I reproduced this locally semi-consistently with some fairly creative
`Thread.sleep` calls and this test fix fixes the issue even with the
sleeps so I'm fairly sure this will work consistently.
Closes#21446
The method used to be called `isSourceEmpty`, and was renamed to `hasSource`, but the return value never changed. Updated tests and users accordingly.
Closes#21419
Null safe dereferences make handling null or missing values shorter.
Compare without:
```
if (ctx._source.missing != null && ctx._source.missing.foo != null) {
ctx._source.foo_length = ctx.source.missing.foo.length()
}
```
To with:
```
Integer length = ctx._source.missing?.foo?.length();
if (length != null) {
ctx._source.foo_length = length
}
```
Combining this with the as of yet unimplemented elvis operator allows
for very concise defaults for nulls:
```
ctx._source.foo_length = ctx._source.missing?.foo?.length() ?: 0;
```
Since you have to start somewhere, we started with null safe dereferenes.
Anyway, this is a feature borrowed from groovy. Groovy allows writing to
null values like:
```
def v = null
v?.field = 'cat'
```
And the writes are simply ignored. Painless doesn't support this at this
point because it'd be complex to implement and maybe not all that useful.
There is no runtime cost for this feature if it is not used. When it is
used we implement it fairly efficiently, adding a jump rather than a
temporary variable.
This should also work fairly well with doc values.
If you try to reindex with multiple slices against a node that
doesn't support it we throw an `IllegalArgumentException` so
`assertVersionSerializable` is ok with it and so if this happens
in REST it comes back as a 400 error.
* Rest client: don't reuse that same HttpAsyncResponseConsumer across multiple retries
Turns out that AbstractAsyncResponseConsumer from apache async http client is stateful and cannot be reused across multiple requests. The failover mechanism was mistakenly reusing that same instance, which can be provided by users, across retries in case nodes are down or return 5xx errors. The downside is that we have to change the signature of two public methods, as HttpAsyncResponseConsumer cannot be provided directly anymore, rather its factory needs to be provided which is going to be used to create one instance of the consumer per request attempt.
Up until now we tested our RestClient against multiple nodes only in a mock environment, where we don't really send http requests. In that scenario we can verify that retries etc. work properly but the interaction with the http client library in a real scenario is different and can catch other problems. With this commit we also add an integration test that sends requests to multiple hosts, and some of them may also get stopped meanwhile. The specific test for pathPrefix was also removed as pathPrefix is now randomly applied by default, hence implicitly tested. Moved also a small test method that checked the validity of the path argument to the unit test RestClientSingleHostTests.
Also increase default buffer limit to 100MB and make it required in default consumer
The default buffer limit used to be 10MB but that proved not to be high enough for scroll requests (see reindex from remote). With this commit we increase the limit to 100MB and make it a bit more visibile in the consumer factory.
At one point in the past when moving out the rest tests from core to
their own subproject, we had multiple test classes which evenly split up
the tests to run. However, we simplified this and went back to a single
test runner to have better reproduceability in tests. This change
removes the remnants of that multiplexing support.
Adds support for `?slices=N` to reindex which automatically
parallelizes the process using parallel scrolls on `_uid`. Performance
testing sees a 3x performance improvement for simple docs
on decent hardware, maybe 30% performance improvement
for more complex docs. Still compelling, especially because
clusters should be able to get closer to the 3x than the 30%
number.
Closes#20624
This adds checks for expected warning headers to the query builder test
infrastructure. Tests that are adding deprecation warnings to the response
headers need to check those, otherwise the abstract base class for the test
class will complain at teardown.
The `IndexService#newQueryShardContext()` method creates a QueryShardContext on
shard `0`, with a `null` reader and that uses `System.currentTimeMillis()` to
resolve `now`. This may hide bugs, since the shard id is sometimes used for
query parsing (it is used to salt random score generation in `function_score`),
passing a `null` reader disables query rewriting and for some use-cases, it is
simply not ok to rely on the current timestamp (eg. percolation). So this pull
request removes this method and instead requires that all call sites provide
these parameters explicitly.
It was 10mb and that was causing trouble when folks reindex-from-remoted
with large documents.
We also improve the error reporting so it tells folks to use a smaller
batch size if they hit a buffer size exception. Finally, adds some docs
to reindex-from-remote mentioning the buffer and giving an example of
lowering the size.
Closes#21185
Previously Elasticsearch would only use the package name for logging
levels, truncating the package prefix and the class name. This meant
that logger names for Netty were just prefixed by netty3 and netty. We
changed this for Elasticsearch so that it's the fully-qualified class
name now, but never corrected this for Netty. This commit fixes the
logger names for the Netty modules so that their levels are controlled
by the fully-qualified class name.
Relates #21223
Refactored ScriptType to clean up some of the variable and method names. Added more documentation. Deprecated the 'in' ParseField in favor of 'stored' to match the indexed scripts being replaced by stored scripts.
Java 9's exception message when lists have an out of bounds index
is much better than java 8 but the painless code asserted on the
java 8 message. Now it'll accept either.
I'm tempted to weaken the assertion but I like asserting that the
message is readable.
Adds support for indexing into lists and arrays with negative
indexes meaning "counting from the back". So for if
`x = ["cat", "dog", "chicken"]` then `x[-1] == "chicken"`.
This adds an extra branch to every array and list access but
some performance testing makes it look like the branch predictor
successfully predicts the branch every time so there isn't a
in execution time for this feature when the index is positive.
When the index is negative performance testing showed the runtime
is the same as writing `x[x.length - 1]`, again, presumably thanks
to the branch predictor.
Those performance metrics were calculated for lists and arrays but
`def`s get roughly the same treatment though instead of inlining
the test they need to make a invoke dynamic so we don't screw up
maps.
Closes#20870
Lucene 6.3 is expected to be released in the next weeks so it'd be good to give
it some integration testing. I had to upgrade randomized-testing too so that
both Lucene and Elasticsearch are on the same version.
This commit fixes responses to HEAD requests so that the value of the
Content-Length is correct per the HTTP spec. Namely, the value of this
header should be equal to the Content-Length if the request were not a
HEAD request.
This commit also fixes a memory leak on HEAD requests to the main action
that arose from the bytes on a builder not being released due to them
being dropped on the floor to ensure that the response to the main
action did not have a body.
Relates #21123
Versions before 2.0 needed to be told to return interesting fields
like `_parent`, `_routing`, `_ttl`, and `_timestamp`. And they come
back inside a `fields` block which we need to parse.
Closes#21044
This commit upgrades the transport-netty4 module dependency from Netty
version 4.1.5 to version 4.1.6. This is a bug fix release of Netty.
Relates #21051
This allows you to whitelist `localhost:*` or `127.0.10.*:9200`.
It explicitly checks for patterns like `*` in the whitelist and
refuses to start if the whitelist would match everything. Beyond
that the user is on their own designing a secure whitelist.
When running `gradle run`, a developer usually intends to get a running
instance as if they had run elasticsearch from the command line. This is
different than the isolated environment we use for integration testing
plugins. This change switches the run task to use the zip distribution,
so that all modules included in the normal distribution are included.
* Scripting: Add support for booleans in scripts
Since 2.0, booleans have been represented as numeric fields (longs).
However, in scripts, this is odd, since you expect doing a comparison
against a boolean to work. While languages like groovy will auto convert
between booleans and longs, painless does not.
This changes the doc values accessor for boolean fields in scripts to
return Boolean objects instead of Long objects.
closes#20949
* Make Booleans final and remove wrapping of `this` for getValues()
This commit fixes an issue with the handling of the value "keep-alive"
on the Connection header in the Netty 4 HTTP implementation while
handling an HTTP 1.0 request. The issue was using the wrong equals
method to compare an AsciiString instance and a String instance (they
could never be equal). This commit fixes this to use the correct equals
method to compare for content equality.
This commit fixes an issue with the handling of the value "close" on the
Connection header in the Netty 4 HTTP implementation. The issue was
using the wrong equals method to compare an AsciiString instance and a
String instance (they could never be equal). This commit fixes this to
use the correct equals method to compare for content equality.
Relates #20956
Today Elasticsearch limits the number of processors used in computing
thread counts to 32. This was from a time when Elasticsearch created
more threads than it does now and users would run into out of memory
errors. It appears the real cause of these out of memory errors was not
well understood (it's often due to ulimit settings) and so users were
left hitting these out of memory errors on boxes with high core
counts. Today Elasticsearch creates less threads (but still a lot) and
we have a bootstrap check in place to ensure that the relevant ulimit is
not too low.
There are some caveats still to having too many concurrent indexing
threads as it can lead to too many little segments, and it's not a
magical go faster knob if indexing is already bottlenecked by disk, but
this limitation is artificial and surprising to users and so it should
be removed.
This commit also increases the lower bound of the max processes ulimit,
to prepare for a world where Elasticsearch instances might be running
with more the previous cap of 32 processors. With the current settings,
Elasticsearch wants to create roughly 576 + 25 * p / 2 threads, where p
is the number of processors. Add in roughly 7 * p / 8 threads for the GC
threads and a fudge factor, and 4096 should cover us pretty well up to
256 cores.
Relates #20874
Both netty3 and netty4 http implementation printed the default
toString representation of PortRange if ports couldn't be bound.
This commit adds a better default toString method to PortRange and
uses the string representation for the error message in the http
implementations.
Some objects like maps, iterables or arrays of objects can self-reference themselves. This is mostly due to a bug in code but the XContentBuilder should be able to detect such situations and throws an IllegalArgumentException instead of building objects over and over until a stackoverflow occurs.
closes#20540closes#19475
Update scripts might want to update the documents `_timestamp` but need a notion of `now()`.
Painless doesn't support any notion of now() since it would make scripts non-pure functions. Yet,
in the update case this is a valid value and we can pass it with the context together to allow the
script to record the timestamp the document was updated.
Relates to #17895
* Replace org.elasticsearch.common.lucene.search.MatchNoDocsQuery with its Lucene version (org.apache.lucene.search.MatchNoDocsQuery)
This change removes the ES version of the match no docs query and replaces it with the Lucene version.
relates #18030
* Add missing change
Today we throw an assertion error if we release an AbstractArray more than once.
Yet, it's recommended to implement close methods such that they can be invoked
more than once. Guaranteed single release calls are hard to implement and some
situations might not be tested causing for instance `CircuitBreaker` to operate on
corrupted memory stats.
UpdateHelper, MetaDataIndexUpgradeService, and some recovery
stuff.
Move ClusterSettings to nullable ctor parameter of TransportService
so it isn't forgotten.
This change proposes the removal of all non-tcp transport implementations. The
mock transport can be used by default to run tests instead of local transport that has
roughly the same performance compared to TCP or at least not noticeably slower.
This is a master only change, deprecation notice in 5.x will be committed as a
separate change.
Today SearchContext expose the current context as a thread local which makes any kind of sane interface design very very hard. This PR removes the thread local entirely and instead passes the relevant context anywhere needed. This simplifies state management dramatically and will allow for a much leaner SearchContext interface down the road.
Today when parsing a request, Elasticsearch silently ignores incorrect
(including parameters with typos) or unused parameters. This is bad as
it leads to requests having unintended behavior (e.g., if a user hits
the _analyze API and misspell the "tokenizer" then Elasticsearch will
just use the standard analyzer, completely against intentions).
This commit removes lenient URL parameter parsing. The strategy is
simple: when a request is handled and a parameter is touched, we mark it
as such. Before the request is actually executed, we check to ensure
that all parameters have been consumed. If there are remaining
parameters yet to be consumed, we fail the request with a list of the
unconsumed parameters. An exception has to be made for parameters that
format the response (as opposed to controlling the request); for this
case, handlers are able to provide a list of parameters that should be
excluded from tripping the unconsumed parameters check because those
parameters will be used in formatting the response.
Additionally, some inconsistencies between the parameters in the code
and in the docs are corrected.
Relates #20722
Nik Everett
Simon Willnauer
Igor Motov
Ali Beyad
Tanguy Leroux
Tim Brooks
javanna
Alexander Reelsen
Zachary Tong
Jason Tedor
Luca Cavanna
Jack Conradson
Martijn van Groningen
Adrien Grand
Daniel Mitterdorfer
Tal Levy
Grzegorz Gajos
Yannick Welsch
Simon Willnauer
Daniel Mitterdorfer
Ryan Ernst
Lee Hinman
Christoph Büscher
Jack Conradson
Boaz Leskes
Jim Ferenczi
Nicholas Knize
Fanfan
Areek Zillur
Colin Goodheart-Smithe