The change to upgrade cross-cluster search settings was backported to
6.5.0. Therefore, this assumption needs to be reduced to the latest
version where settings were not automatically upgraded.
This commit adds settings upgraders for the search.remote.* settings
that can be in the cluster state to automatically upgrade these settings
to cluster.remote.*. Because of the infrastructure that we have here,
these settings can be upgraded when recovering the cluster state, but
also when a user tries to make a dynamic update for these settings.
These logs are incredibly verbose, and it makes chasing normal failures
burdensome. This commit removes the debug logging, which can be
reenabled again if needed.
Clean up on top of the last fix: if we skip the entire test case then
the test run would fail because we skipped all the tests. This adds a
dummy test case to prevent that. It is a fairly nasty work around I plan
to work on something that makes this not required any more anyway.
If we're running on a platform where we can't install syscall filters
Elasticsearch logs a message before it reads the data directory to get
the node name. Because that log message doesn't have a node name this
test will fail. Since we mostly run the test on OSes where we *can*
install the syscall filters we can fairly safely skip the test on OSes
where we can't install the syscall filters.
Closes#33540
Today when checking settings dependencies, we do not check if fallback
settings are present. This means, for example, that if
cluster.remote.*.seeds falls back to search.remote.*.seeds, and
cluster.remote.*.skip_unavailable and search.remote.*.skip_unavailable
depend on cluster.remote.*.seeds, and we have set search.remote.*.seeds
and search.remote.*.skip_unavailable, then validation will fail because
it is expected that cluster.ermote.*.seeds is set here. This commit
addresses this by also checking fallback settings when validating
dependencies. To do this, we adjust the settings exist method to also
check for fallback settings, a case that it was not handling previously.
Change the logging infrastructure to handle when the node name isn't
available in `elasticsearch.yml`. In that case the node name is not
available until long after logging is configured. The biggest change is
that the node name logging no longer fixed at pattern build time.
Instead it is read from a `SetOnce` on every print. If it is unset it is
printed as `unknown` so we have something that fits in the pattern.
On normal startup we don't log anything until the node name is available
so we never see the `unknown`s.
When we rollover and index we write the conditions of the rollover that
the old index met into the old index. Loading this index metadata
requires a working `NamedXContentRegistry` that has been populated with
parsers from the rollover infrastructure. We had a few loads that didn't
use a working `NamedXContentRegistry` and so would fail if they ever
encountered an index that had been rolled over. Here are the locations
of the loads and how I fixed them:
* IndexFolderUpgrader - removed entirely. It existed to support opening
indices made in Elasticsearch 2.x. Since we only need this change as far
back as 6.4.1 which will supports reading from indices created as far
back as 5.0.0 we should be good here.
* TransportNodesListGatewayStartedShards - wired the
`NamedXContentRegistry` into place.
* TransportNodesListShardStoreMetaData - wired the
`NamedXContentRegistry` into place.
* OldIndexUtils - removed entirely. It existed to support the zip based
index backwards compatibility tests which we've since replaced with code
that actually runs old versions of Elasticsearch.
In addition to fixing the actual problem I added full cluster restart
integration tests for rollover which would have caught this problem and
I added an extra assertion to IndexMetaData's deserialization code which
will trip if we try to deserialize and index's metadata without a fully
formed `NamedXContentRegistry`. It won't catch if use the *wrong*
`NamedXContentRegistry` but it is better than nothing.
Closes#33316
With features like CCR building on the CCS infrastructure, the settings
prefix search.remote makes less sense as the namespace for these remote
cluster settings than does a more general namespace like
cluster.remote. This commit replaces these settings with cluster.remote
with a fallback to the deprecated settings search.remote.
In our Netty layer we have had to take extra precautions against Netty
catching throwables which prevents them from reaching the uncaught
exception handler. This code has taken on additional uses in NIO layer
and now in the scheduler engine because there are other components in
stack traces that could catch throwables and suppress them from reaching
the uncaught exception handler. This commit is a simple cleanup of the
iterative evolution of this code to refactor all uses into a single
method in ExceptionsHelper.
This reworks how we configure the `shadow` plugin in the build. The major
change is that we no longer bundle dependencies in the `compile` configuration,
instead we bundle dependencies in the new `bundle` configuration. This feels
more right because it is a little more "opt in" rather than "opt out" and the
name of the `bundle` configuration is a little more obvious.
As an neat side effect of this, the `runtimeElements` configuration used when
one project depends on another now contains exactly the dependencies needed
to run the project so you no longer need to reference projects that use the
shadow plugin like this:
```
testCompile project(path: ':client:rest-high-level', configuration: 'shadow')
```
You can instead use the much more normal:
```
testCompile "org.elasticsearch.client:elasticsearch-rest-high-level-client:${version}"
```
WildflyIT test fails in a FIPS JVM due to the amount of output in stderr. The excessive stderr output is due to https://bugs.openjdk.java.net/browse/JDK-8202893 and is not an indication of a failure that should be tracked.
This commit adjusts the limit to something more lenient that would allow the test to succeed.
Reverts #32543
Remove a few of the logger constructors that aren't widely used or
aren't used at all and deprecate a few more logger constructors in favor
of log4j2's `LogManager`.
On some Linux distributions tmpfiles.d cleans files and
directories under /tmp if they haven't been accessed for
10 days.
This can cause problems for ML as ML is currently the only
component that uses the temp directory more than a few
seconds after startup. If you didn't open an ML job for
10 days and then tried to open one then the temp directory
would have been deleted.
This commit prevents the problem occurring in the case of
Elasticsearch being managed by systemd, as systemd private
temp directories are not subject to periodic cleanup (by
default).
Additionally there are now some docs to warn people about
the risk and suggest a manual mitigation for .tar.gz users.
First, some background: we have 15 different methods to get a logger in
Elasticsearch but they can be broken down into three broad categories
based on what information is provided when building the logger.
Just a class like:
```
private static final Logger logger = ESLoggerFactory.getLogger(ActionModule.class);
```
or:
```
protected final Logger logger = Loggers.getLogger(getClass());
```
The class and settings:
```
this.logger = Loggers.getLogger(getClass(), settings);
```
Or more information like:
```
Loggers.getLogger("index.store.deletes", settings, shardId)
```
The goal of the "class and settings" variant is to attach the node name
to the logger. Because we don't always have the settings available, we
often use the "just a class" variant and get loggers without node names
attached. There isn't any real consistency here. Some loggers get the
node name because it is convenient and some do not.
This change makes the node name available to all loggers all the time.
Almost. There are some caveats are testing that I'll get to. But in
*production* code the node name is node available to all loggers. This
means we can stop using the "class and settings" variants to fetch
loggers which was the real goal here, but a pleasant side effect is that
the ndoe name is now consitent on every log line and optional by editing
the logging pattern. This is all powered by setting the node name
statically on a logging formatter very early in initialization.
Now to tests: tests can't set the node name statically because
subclasses of `ESIntegTestCase` run many nodes in the same jvm, even in
the same class loader. Also, lots of tests don't run with a real node so
they don't *have* a node name at all. To support multiple nodes in the
same JVM tests suss out the node name from the thread name which works
surprisingly well and easy to test in a nice way. For those threads
that are not part of an `ESIntegTestCase` node we stick whatever useful
information we can get form the thread name in the place of the node
name. This allows us to keep the logger format consistent.
This recreates a test that was added to the bats packaging tests
in #31343 but didn't make it over to the java project during when the
linux package tests were ported in #31943
When packages are installed but can not locate the java executable, they
should fail with a descriptive message
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `qa/full-cluster-restart` project to use the new
versions.
It also fixes a small bug in the test for explain on the `_all` field
that was causing it to not properly invoke `_explain`.
* Remove BouncyCastle dependency from runtime
This commit introduces a new gradle project that contains
the classes that have a dependency on BouncyCastle. For
the default distribution, It builds a jar from those and
in puts it in a subdirectory of lib
(/tools/security-cli) along with the BouncyCastle jars.
This directory is then passed in the
ES_ADDITIONAL_CLASSPATH_DIRECTORIES of the CLI tools
that use these classes.
BouncyCastle is removed as a runtime dependency (remains
as a compileOnly one) from x-pack core and x-pack security.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `qa/rolling-upgrade` project to use the new
versions.
Add packaging tests for the linux package distributions to the java test
project and remove them from bats. Most of the tests that lived in
30_deb_package.bats and 40_rpm_package.bats are applicable to both
package types and are combined into a single type of test case. Others
are separated out into separate cases to make their intent more clear
For #26741
Use the randomized runner from the test framework and add some basic
logging to make the packaging tests behave more similarly to how we use
junit in the rest of the project
We have been encountering name mismatches between API defined in our
REST spec and method names that have been added to the high-level REST
client. We should check this automatically to prevent furher mismatches,
and correct all the current ones.
This commit adds a test for this and corrects the issues found by it.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes most of the calls not in X-Pack to their new versions.
The `:x-pack:protocol` project is an implementation detail shared by the
xpack projects and the high level rest client and really doesn't deserve
its own maven coordinants and published javadoc. This change bundles
`:x-pack:protocol` into the high level rest client.
Relates to #29827
Recreates the rest of the bats packaging tests for the tar distribution
in the java packaging test project, with support for both tar and zip
packaging, both oss and default flavors, and on Linux and Windows. Most
tests are followed fairly closely, some have either been dropped if
unnecessary or folded into others if convenient.
So the issue here is that we want to avoid setting vm.max_map_count if
it is already equal to the desired value (the bootstrap check requires
262144). The reason we want to avoid this is because in some use-cases
using sysctl to set this will fail. In this case, we want to enable
users to set this value externally and then allow that to cause using
sysctl to set the value to be skipped so that cases where using sysctl
will fail to no longer fail.
Merges the `query-builder-bwc` qa project into the
`full-cluster-restart` qa project, saving a cluster starts on every
build and *many* cluster starts on `./gradlew bwcTests`.
This creates a YAML test "features" that indices if the cluster being
tested has xpack installed (`xpack`) or if it does *not* have xpack
installed (`no_xpack`). It uses those features to centralize skipping
a few tests that fail if xpack is installed.
The plan is to use this in a followup to skip docs tests that require
xpack when xpack is not installed. We *plan* to use the declaration
of required license level on the docs page to generate the required
`skip`.
Closes#30933.
The package installation relies on java being in the path. If java is
not in the path, the tests fail at post-install time. This commit adds a
pre-install check to validate that java exists, and if it fails, the
package is never installed, and thus keeps a system clean, rather than
aborting at post-install and leaving behind a mess.
Closes#29665
Although the master branch does not affect by #31482, it's helpful to
have BWC tests that verify the peer recovery with a synced-flush index.
This commit adds the bwc tests from #31506 to the master branch.
Relates #31482
Relates #31506
TransportRequestHandler currently contains 2 messageReceived methods,
one which takes a Task, and one that does not. The first just delegates
to the second. This commit changes all existing implementors of
TransportRequestHandler to implement the version which takes Task, thus
allowing the class to be a functional interface, and eliminating the
need to throw exceptions when a task needs to be ensured.
This change moves tests in `smoke-test-rank-eval-with-mustache` into the main
ranking evaluation module by declaring that the integration testing cluster
requires the `lang-mustache` plugin. This avoids having to maintain the qa
project for only one basic test suite.
This commit modifies the Sys V init startup scripts to only modify
vm.max_map_count if needed. In this case, needed means that the current
value is less than our default value of 262144 maps.
If you run `./gradlew -p qa bwcTest -Dtests.distribution=zip` then we
need to resolve older versions of the default distribution. Since those
aren't available in maven central, we need add the elastic maven repo to
the project.
This commit upgrades us to Netty 4.1.25. This upgrade is more
challenging than past upgrades, all because of a new object cleaner
thread that they have added. This thread requires an additional security
permission (set context class loader, needed to avoid leaks in certain
scenarios). Additionally, there is not a clean way to shutdown this
thread which means that the thread can fail thread leak control during
tests. As such, we have to filter this thread from thread leak control.
Use all running nodes as unicast seeds in the rolling restart tests to
avoid a race between pinging and the tests. Without this if the tests
are too fast then when a new node comes up and pings its single
configured seed node that node *might* not have a ping from the other
running node.
This is related to #27260 and #28898. This commit adds the transport-nio
plugin as a random option when running the http smoke tests. As part of
this PR, I identified an issue where cors support was not properly
enabled causing these tests to fail when using transport-nio. This
commit also fixes that issue.
With #30490 we have introduced a new way to provide request options
whenever sending a request using the high-level REST client. Before you
could provide headers as the last argument varargs of each API method,
now you can provide `RequestOptions` that in the future will allow to
provide more options which can be specified per request.
This commit deprecates all of the client methods that accept a `Header`
varargs argument in favour of new methods that accept `RequestOptions`
instead. For some API we don't even go through deprecation given that
they were not released since they were added, hence in that case we can
just move them to the new method.
This is much more realistic and can find more issues. This causes the
"mixed cluster" tests to be run twice so I had to fix the tests to work
in that case. In most cases I did as little as possible to get them
working but in a few cases I went a little beyond that to make them
easier for me to debug while getting them to work. My test changes:
1. Remove the "basic indexing" tests and replace them with a copy of the
tests used in the OSS. We have no way of sharing code between these two
projects so for now I copy.
2. Skip the a few tests in the "one third" upgraded scenario:
* creating a scroll to be reused when the cluster is fully upgraded
* creating some ml data to be used when the cluster is fully ugpraded
3. Drop many "assert yellow and that the cluster has two nodes"
assertions. These assertions duplicate those made by the wait condition
and they fail now that we have three nodes.
4. Switch many "assert green and that the cluster has two nodes" to 3
nodes. These assertions are unique from the wait condition and, while
I imagine they aren't required in all cases, now is not the time to
find that out. Thus, I made them work.
5. Rework the index audit trail test so it is more obvious that it is
the same test expecting different numbers based on the shape of the
cluster. The conditions for which number are expected are fairly
complex because the index audit trail is shut down until the template
for it is upgraded and the template is upgraded when a master node is
elected that has the new version of the software.
6. Add some more information to debug the index audit trail test because
it helped me figure out what was going on.
I also dropped the `waitCondition` from the `rolling-upgrade-basic`
tests because it wasn't needed.
Closes#25336
In case an error is returned when calling search_shards on a remote
cluster, which will lead to throwing an exception in the coordinating
node, we should make sure that the status code returned by the
coordinating node is the same as the one returned by the remote
cluster. Up until now a 500 - Internal Server Error was always
returned. This commit changes this behaviour so that for instance if an
index is not found, which causes an 404, a 404 is also returned by the
coordinating node to the client.
Closes#27461
This modifies the high level rest client to allow calling code to
customize per request options for the bulk API. You do the actual
customization by passing a `RequestOptions` object to the API call
which is set on the `Request` that is generated by the high level
client. It also makes the `RequestOptions` a thing in the low level
rest client. For now that just means you use it to customize the
headers and the `httpAsyncResponseConsumerFactory` and we'll add
node selectors and per request timeouts in a follow up.
I only implemented this on the bulk API because it is the first one
in the list alphabetically and I wanted to keep the change small
enough to review. I'll convert the remaining APIs in a followup.
Currently failures to compile a script usually lead to a ScriptException, which
inherits the 500 INTERNAL_SERVER_ERROR from ElasticsearchException if it does
not contain another root cause. Instead, this should be a 400 Bad Request error.
This PR changes this more generally for script compilation errors by changing
ScriptException to return 400 (bad request) as status code.
Closes#12315
When subprocesses are started with ProcessBuilder, they're forked by the
java process directly rather than from a shell, which can be surprising
for our use case here in the packaging tests which is similar to
scripting.
This commit changes the tests to run their subprocess commands in a
shell, using the bash -c <script> syntax for commands on linux and using
the powershell.exe -Command <script> syntax for commands on windows.
This syntax on windows is essentially what the tests were already doing.
Ports the first couple tests for archive distributions from the old bats
project to the new java project that includes windows platforms,
consolidating them into one test method that tests that the
distributions can be extracted and their contents verified. Includes the
zip distributions which were not tested in the bats project.
A rolling upgrade from oss Elasticsearch to the default distribution of
Elasticsearch is significantly different than a full cluster restart to
install a plugin and is again different from starting a new cluster with
xpack installed. So this adds some basic tests to make sure that the
rolling upgrade that enables xpack works at all.
This also removes some unused imports from the tests that I modified in
PR #30728. I didn't mean to leave them.
Adding headers rather than setting them all at once seems more
user-friendly and we already do it in a similar way for parameters
(see Request#addParameter).
Switches the rolling upgrade tests from upgrading two nodes to upgrading
three nodes which is much more realistic and much better able to find
unexpected bugs. It upgrades the nodes one at a time and runs tests
between each upgrade. As such this now has four test runs:
1. Old
2. One third upgraded
3. Two thirds upgraded
4. Upgraded
It sets system properties so the tests can figure out which stage they
are in. It reuses the same yml tests for the "one third" and "two
thirds" cases because they are *almost* the same case.
This rewrites the yml-based indexing tests to be Java based because the
yml-based tests can't handle different expected values for the counts.
And the indexing tests need that when they are run twice.
Meta plugins existed only for a short time, in order to enable breaking
up x-pack into multiple plugins. However, now that x-pack is no longer
installed as a plugin, the need for them has disappeared. This commit
removes the meta plugins infrastructure.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the the old requests. This
changes many calls in the `qa` projects to use the new version.
This configures all `qa` projects to use the distribution contained in
the `tests.distribution` system property if it is set. The goal is to
create a simple way to run tests against the default distribution which
has x-pack basic features enabled while not forcing these tests on all
contributors. You run these tests by doing something like:
```
./gradlew -p qa -Dtests.distribution=zip check
```
or
```
./gradlew -p qa -Dtests.distribution=zip bwcTest
```
x-pack basic *shouldn't* get in the way of any of these tests but
nothing is ever perfect so this we have to disable a few when running
with the zip distribution.
This commit changes the default out-of-the-box configuration for the
number of shards from five to one. We think this will help address a
common problem of oversharding. For users with time-based indices that
need a different default, this can be managed with index templates. For
users with non-time-based indices that find they need to re-shard with
the split API in place they no longer need to resort only to
reindexing.
Since this has the impact of changing the default number of shards used
in REST tests, we want to ensure that we still have coverage for issues
that could arise from multiple shards. As such, we randomize (rarely)
the default number of shards in REST tests to two. This is managed via a
global index template. However, some tests check the templates that are
in the cluster state during the test. Since this template is randomly
there, we need a way for tests to skip adding the template used to set
the number of shards to two. For this we add the default_shards feature
skip. To avoid having to write our docs in a complicated way because
sometimes they might be behind one shard, and sometimes they might be
behind two shards we apply the default_shards feature skip to all docs
tests. That is, these tests will always run with the default number of
shards (one).
Currently the ranking evaluation API accepts the full query syntax for
the queries specified in the evaluation set and executes them via multi
search. This potentially runs costly aggregations and suggestions too.
This change adds checks that forbid using aggregations, suggesters,
highlighters and the explain and profile options in the queries that are
run as part of the ranking evaluation since they are irrelevent in the
context of this API.
This folds the `:qa:smoke-test-reindex-with-all-modules` project into
`:modules:reindex` by declaring the reindex's integration testing
cluster requires the `parent-join` and `lang-painless` plugins and then
moving all of the integration tests that depended on parent-join and
painless into reindex.
It saves us one cluster start up during the build at the cost of a
little of the reindex module's "purity". Since the reindex module *does*
have unit tests that test scripting without painless I'm fairly ok with
that.
Today when processing a request for a URL path for which we can not find
a handler we send back a plain-text response. Yet, we have the accept
header in our hand and can respect the accepted media type of the
request. This commit addresses this.
This commit adds setting the homedir for the elasticsearch user to the
adduser command in the packaging preinstall script. While the
elasticsearch user is a system user, it is sometimes conventient to have
an existing homedir (even if it is not writeable). For example, running
cron as the elasticsearch user will try to change dir to the homedir.
closes#14453
This commit removes the http.enabled setting. While all real nodes (started with bin/elasticsearch) will always have an http binding, there are many tests that rely on the quickness of not actually needing to bind to 2 ports. For this case, the MockHttpTransport.TestPlugin provides a dummy http transport implementation which is used by default in ESIntegTestCase.
closes#12792
Systemd overrides should happen through /etc/systemd/system, not
directly editing the service file. This commit removes marking the
service file as configuration for rpm and deb packages.
Many tests are added with a version check so that they do not run against a
version that doesn't have the feature yet. Master is 7.0, so all tests that
do not run against 6.0+ can be removed and the version check can be removed
on all tests that always run on 6.0+.
[test] add java packaging test project
Adds a project for building and running packaging tests written in java
for portability. The vagrant tasks use jars on the packagingTest
configuration, which are built in the same project. No tests are added
yet.
Corresponding changes are not made to :x-pack:qa:vagrant because the
java packaging tests will all be consolidated into one project.
For #26741
This folds the `:qa:reindex-from-old` project into the `:modules:reindex`
project. This should speed up the build marginally by removing a single
clsuter start up at the cost of having to wait for old versions of
Elasticsearch to start up when checking reindex's integration tests.
Those don't take that long so this feels worth it.
This commit moves the repository-s3 fixture test added in #29296 in a
new `repository-s3/qa/amazon-s3` project. This new project allows the
REST integration tests to be executed using the real S3 service when
all the required environment variables are provided. When no env var
is provided, then the tests are executed using the fixture added
in #29296.
The REST tests located at the `repository-s3`plugin project now only
verify that the plugin is correctly loaded.
The REST tests have been adapted to allow a bucket name and a base
path to be specified as env vars. This way it is possible to run the tests
with different base paths (could be anything, like a CI job name or a
branch name) without multiplicating buckets.
Related to #29349
Add the oss tar distribution to the packaging test plugin. Test the oss
tar distribution in the core packaging tests, and the non-oss tar
distribution in the x-pack packaging tests.
The packaging tests for Debian based distro is loooking
for docs in /usr/share/elasticsearch, but it should be
/usr/share/elasticsearch-oss for the oss package.
This commit makes x-pack a module and adds it to the default
distrubtion. It also creates distributions for zip, tar, deb and rpm
which contain only oss code.
This commit moves the checks on JAVAX_HOME (where X is the java version
number) existing to the end of gradle's configuration phase, and based
on whether the tasks needing the java home are configured to execute.
relates #29519
The test was using a parameter on GET /_cluster/health that older nodes
do not understand. Yet, we do no even need to make this call here, we
can use ensure green for the index.
This test is failing because of an addition of a call to GET
/_cluster/health with the parameter wait_for_no_initializing_shards set
to true. As older versions of Elasticsearch do not understand this
parameter, this request fails and the test fails. This commit marks this
test as awaiting a fix.
Some build tasks require older JDKs. For example, the BWC build tasks
for older versions of Elasticsearch require older JDKs. It is onerous to
require these be configured when merely compiling Elasticsearch, the
requirement that they be strictly set to appropriate values should only
be enforced if these tasks are going to be executed. To address this, we
lazy configure these tasks.
Today we have JAVA_HOME for the compiler Java home and RUNTIME_JAVA_HOME
for the test Java home. However, when we compile BWC nodes and run them,
neither of these Java homes might be the version that was suitable for
that BWC node (e.g., 5.6 requires JDK 8 to compile and to run). This
commit adds support for the environment variables JAVA\d+_HOME and uses
the appropriate Java home based on the version of the node being
started. We even do this for reindex-from-old which requires JDK 7 for
these very old nodes. Note that these environment variables are not
required if not running BWC tests, and they are strictly required if
running BWC tests.
Some features have been deprecated since `6.0` like the `_parent` field or the
ability to have multiple types per index. This allows to remove quite some
code, which in-turn will hopefully make it easier to proceed with the removal
of types.
I found the following bugs:
- The 6.0 logic for conjunctions didn't work when there were only `match_all`
queries in MUST/FILTER clauses as they didn't propagate the `matchAllDocs`
flag.
- Some queries still had the same issue as `BooleanQuery` used to have with
duplicate terms (see #28353), eg. `MultiPhraseQuery`.
Closes#29376
Today we have a silent batch mode in the install plugin command when
standard input is closed or there is no tty. It appears that
historically this was useful when running tests where we want to accept
plugin permissions without having to acknowledge them. Now that we have
an explicit batch mode flag, this use-case is removed. The motivation
for removing this now is that there is another place where silent batch
mode arises and that is when a user attempts to install a plugin inside
a Docker container without keeping standard input open and attaching a
tty. In this case, the install plugin command will treat the situation
as a silent batch mode and therefore the user will never have the chance
to acknowledge the additional permissions required by a plugin. This
commit removes this silent batch mode in favor of using the --batch flag
when running tests and requiring the user to take explicit action to
acknowledge the additional permissions (either by leaving standard input
open and attaching a tty, or by passing the --batch flags themselves).
Note that with this change the user will now see a null pointer
exception when they try to install a plugin in a Docker container
without keeping standard input open and attaching a tty. This will be
addressed in an immediate follow-up, but because the implications of
that change are larger, they should be handled separately from this one.
The vagrant test plugin adds tasks for the groovy packaging tests,
which run after the bats packaging test tasks.Rename the 'bats'
configuration to 'packaging' and remove the option to inherit
archives from this configuration.
I did a little digging. It looks like IOException is thrown when the other
side closes its connection while we're waiting on our buffer to fill up. We
totally expect that in this test. It feels to me like we should throw a
`ConnectionClosedException` but upstream does not agree:
https://issues.apache.org/jira/browse/HTTPASYNC-134
While we *could* catch the exception and transform it ourselves that
seems like a bigger change than is merited at this point.
Closes#29136
Currently we store the indices specified in the request URL together with all
the other ranking evaluation specification in RankEvalSpec. This is not ideal
since e.g. the indices are not rendered to xContent and so cannot be parsed
back. Instead we should keep them in RankEvalRequest.
This commit (which will be reverted soon) adds logging on the output of
starting Wildfly. This is needed to debug an issue with Wildfly not
starting in CI.
* Decouple XContentBuilder from BytesReference
This commit removes all mentions of `BytesReference` from `XContentBuilder`.
This is needed so that we can completely decouple the XContent code and move it
into its own dependency.
While this change appears large, it is due to two main changes, moving
`.bytes()` and `.string()` out of XContentBuilder itself into static methods
`BytesReference.bytes` and `Strings.toString` respectively. The rest of the
change is code reacting to these changes (the majority of it in tests).
Relates to #28504
I have long wanted an actual test that dying with dignity works. It is
tricky because if dying with dignity works, it means the test JVM dies
which is usually an abnormal condition. And anyway, how does one force a
fatal error to be thrown. I was motivated to investigate this again by
the fact that I missed a backport to one branch leading to an issue
where Elasticsearch would not successfully die with dignity. And now we
have a solution: we install a plugin that throws an out of memory error
when it receives a request. We hack the standalone test infrastructure
to prevent this from failing the test. To do this, we bypass the
security manager and remove the PID file for the node; this tricks the
test infrastructure into thinking that it does not need to stop the
node. We also bypass seccomp so that we can fork jps to make sure that
Elasticsearch really died. And to be extra paranoid, we parse the logs
of the dead Elasticsearch process to make sure it died with
dignity. Never forget.
This commit removes the ability to specify that a plugin requires the
keystore and instead creates the keystore on package installation or
when Elasticsearch is started for the first time. The reason that we opt
to create the keystore on package installation is to ensure that the
keystore has the correct permissions (the package installation scripts
run as root as opposed to Elasticsearch running as the elasticsearch
user) and to enable removing the keystore on package removal if the
keystore is not modified.
This commit makes the controller spawner also look under modules. It
also fixes a bug in module security policy loading where the module is a
meta plugin.
Applying the rest test gradle plugin already uses the zip distribution
by default, so specifying it explicitly is not necessary. These are
leftovers from before zip was the default for rest tests.
Add support version and version_type in ingest pipelines
Add support for setting document version and version type in set
processor of an ingest pipeline.
Nodes are reusing task ids after restart. So in some rare circumstances
the same task id might be assigned to the reindexing task stored by the
old cluster and the new task that is trying to retrieve the task
results. As a result, the get task request can timeout waiting on
itself. Since we already waited for the task to finish before restarting
the cluster, waiting for the task here doesn't make any sense to start
with.
Fixes#28732
* Remove log4j dependency from elasticsearch-core
This removes the log4j dependency from our elasticsearch-core project. It was
originally necessary only for our jar classpath checking. It is now replaced by
a `Consumer<String>` so that the es-core dependency doesn't have external
dependencies.
The parts of #28191 which were moved in conjunction (like `ESLoggerFactory` and
`Loggers`) have been moved back where appropriate, since they are not required
in the core jar.
This is tangentially related to #28504
* Add javadocs for `output` parameter
* Change @code to @link
Previously a user could set a custom config path to a relative directory
using ES_PATH_CONF. In a previous change related to enabling GC logging
by default, we forced the working directory for Elasticsearch to be
ES_HOME. This had the impact of causing all relative paths to be
relative to ES_HOME, against the intent of the user. This commit
addresses this by making ES_PATH_CONF absolute before we switch the
working directory to ES_HOME.
Relates #28700
When we submit a task to a thread pool for asynchronous execution, we
are returned a future. Since we submitted to go asynchronous, these
futures are not inspected for failure (we would have to block a thread
to do that). While we have on failure handlers for exceptions that are
thrown during execution, we do not handle throwables that are not
exceptions and these end up silently lost. This commit adds a check
after the runnable returns that inspects the status of the future. If an
unhandled throwable occurred during execution, this throwable is
propogated out where it will land in the uncaught exception handler.
Relates #28667
* Move more XContent.createParser calls to non-deprecated version
This moves more of the callers to pass in the DeprecationHandler.
Relates to #28504
* Use parser's deprecation handler where available
[TEST] packaging: function to collect debug info
Sometimes when packaging tests fail in CI the test logs aren't enough to
tell what went wrong. This routine helps collect more info about the
state of the es installation at failure time
Generalizing BWC building so that there is less code to modify for a release. This ensures we do not
need to think about what major or minor version is in the gradle code. It follows the general rules of the
elastic release structure. For more information on the rules, see the VersionCollection's javadoc.
This also removes the additional bwc snapshots that will never be released, such as 6.0.2, which were
being built and tested against every time we ran bwc tests.
Additionally, it creates 4 new projects that correspond to the different types of snapshots that may exist
for a given version. Its possible to now run those individual tasks to work out bwc logic whereas
previously it was impossible and the entire suite of bwc tests had to be run to work out any logic
changes in the build tools' bwc project. Please note that if the project does not make sense for the
version that is current, that an error will be thrown from that individual project if an attempt is made to
run it.
This should allow for automating the version bumps as well, since it removes all the hardcoded version
logic from the configs.
Currently meta plugins will ask for confirmation of security policy
exceptions for each bundled plugin. This commit collects the necessary
permissions of each bundled plugin, and asks for confirmation of all of
them at the same time.
This pull request replaces the jvm-example plugin (from the jvm/site plugins era) by two new plugins: a custom-settings that shows how to register and use custom settings (including secured settings) in a plugin, and rest-handler plugin that shows how to register a rest handler.
The two plugins now reside in the plugins/examples project. They can serve as sample plugins for users, a special attention has been put on documentation. The packaging tests have been adapted to use the custom-settings plugin.
Our rest client throws exceptions in funny ways that might cause
`suppressed` exceptions to be eaten. This works around that in the
reindex-from-old tests so we don't stomp on a real failure. It is fairly
diryt so we should work on fixing the high level rest client.
Relates to #25453
The current install_plugin() does not play well with meta plugins because
it always checks for the plugin's descriptor file.
This commit changes the install_plugin() so that it only runs the install plugin
command and lets the caller verify that the required files are correctly installed.
It also adds a install_meta_plugin() function to install meta plugins.
Currenty the rest response of the ranking evaluation API wraps all inside an
enclosing `rank_eval` object. This is redundant since it is clear from the API
call and it doesn't provide any other useful information. This change removes
this.
This commit lessens the burden on configuring settings.gradle when new
projects are added. In particular, this makes it trivial to move a
plugin to a module (or vice versa).
This commit modifies the build to require JDK 9 for
compilation. Henceforth, we will compile with a JDK 9 compiler targeting
JDK 8 as the class file format. Optionally, RUNTIME_JAVA_HOME can be set
as the runtime JDK used for running tests. To enable this change, we
separate the meaning of the compiler Java home versus the runtime Java
home. If the runtime Java home is not set (via RUNTIME_JAVA_HOME) then
we fallback to using JAVA_HOME as the runtime Java home. This enables:
- developers only have to set one Java home (JAVA_HOME)
- developers can set an optional Java home (RUNTIME_JAVA_HOME) to test
on the minimum supported runtime
- we can test compiling with JDK 9 running on JDK 8 and compiling with
JDK 9 running on JDK 9 in CI
Currently if the Lucene version is `X.Y.Z-snapshot-{gitrev}`, then we will
expect the docs to have `X.Y.Z-snapshot` as a Lucene version. I would like
to change it to `X.Y.Z` so that this doesn't need changing when we move from a
snapshot to a final release.
This is related to #27933. It introduces a jar named elasticsearch-core
in the lib directory. This commit moves the JarHell class from server to
elasticsearch-core. Additionally, PathUtils and some of Loggers are
moved as JarHell depends on them.
The configuration of the upgraded cluster task was missing a dependency
on the stopping of the second old node in the cluster. In some cases
(e.g., --parallel) Gradle would then try to run the configuration of a
node in the upgraded cluster before it had even configured the old nodes
in the cluster.
Relates #28036
This commit adds the ability to package multiple plugins in a single zip.
The zip file for a meta plugin must contains the following structure:
|____elasticsearch/
| |____ <plugin1> <-- The plugin files for plugin1 (the content of the elastisearch directory)
| |____ <plugin2> <-- The plugin files for plugin2
| |____ meta-plugin-descriptor.properties <-- example contents below
The meta plugin properties descriptor is mandatory and must contain the following properties:
description: simple summary of the meta plugin.
name: the meta plugin name
The installation process installs each plugin in a sub-folder inside the meta plugin directory.
The example above would create the following structure in the plugins directory:
|_____ plugins
| |____ <name_of_the_meta_plugin>
| | |____ meta-plugin-descriptor.properties
| | |____ <plugin1>
| | |____ <plugin2>
If the sub plugins contain a config or a bin directory, they are copied in a sub folder inside the meta plugin config/bin directory.
|_____ config
| |____ <name_of_the_meta_plugin>
| | |____ <plugin1>
| | |____ <plugin2>
|_____ bin
| |____ <name_of_the_meta_plugin>
| | |____ <plugin1>
| | |____ <plugin2>
The sub-plugins are loaded at startup like normal plugins with the same restrictions; they have a separate class loader and a sub-plugin
cannot have the same name than another plugin (or a sub-plugin inside another meta plugin).
It is also not possible to remove a sub-plugin inside a meta plugin, only full removal of the meta plugin is allowed.
Closes#27316
We have a packaging test that tries to install all plugins, and then
asserts that all expected plugins are installed. The expected plugins
are dervied from the list of plugins in the plugins sub-project. The
plugin transport-nio was recently added here, but explicit commands to
install and remove this plugin were never added. This commit addresses
this.
The full-cluster-restart tests are run with two nodes. This can lead to situations where the shrink tests fail because
the replicas are not allocated yet and the shrink operation needs the source shards to be available on the same node.
This is related to #27260. This commit moves the NioTransport from
:test:framework to a new nio-transport plugin. Additionally, supporting
tcp decoding classes are moved to this plugin. Generic byte reading and
writing contexts are moved to the nio library.
Additionally, this commit adds a basic MockNioTransport to
:test:framework that is a TcpTransport implementation for testing that
is driven by nio.
Lucene does not allow adding Lucene 6 files to a Lucene 7 index. This commit ensures that we carry over the Lucene version to the newly created Lucene index.
Closes#28061
This commit adds the infrastructure to plugin building and loading to
allow one plugin to extend another. That is, one plugin may extend
another by the "parent" plugin allowing itself to be extended through
java SPI. When all plugins extending a plugin are finished loading, the
"parent" plugin has a callback (through the ExtensiblePlugin interface)
allowing it to reload SPI.
This commit also adds an example plugin which uses as-yet implemented
extensibility (adding to the painless whitelist).
Previously we disabled these tests on JDK 9 and JDK 10 because Wildfly
10 did not support JDK 9 and JDK 10. With the release of Wildfly 11
supporting JDK 9 and JDK 10 and now that we depend on Wildfly 11 in
these tests, we can enable these tests on JDK 9 and JDK 10.
Relates #28042
This commit fixes a flubbed assertion in the Wildfly build file; the
intention was to assert that we have only set the value of the
management port once except the assertion that the management port was
equal to zero when finding a matching log line was left off.
The Wildfly tests previously needed hardcoded ports which would
sometimes already be in use leading to Wildfly test failures because the
server could not bind during startup. We had to wait until some upstream
changes (wildfly/wildfly#9943) and (wildfly/wildfly-core#2390) were
released before we could use ephemeral ports in these tests. These
changes are released now so this commit changes the Wildfly tests to use
ephemeral ports when starting Wildfly.
Relates #28040
* Adds task dependenciesInfo to BuildPlugin to generate a CSV file with dependencies information (name,version,url,license)
* Adds `ConcatFilesTask.groovy` to concatenates multiple files into one
* Adds task `:distribution:generateDependenciesReport` to concatenate `dependencies.csv` files into a single file (`es-dependencies.csv` by default)
# Examples:
$ gradle dependenciesInfo :distribution:generateDependenciesReport
## Use `csv` system property to customize the output file path
$ gradle dependenciesInfo :distribution:generateDependenciesReport -Dcsv=/tmp/elasticsearch-dependencies.csv
## When branch is not master, use `build.branch` system property to generate correct licenses URLs
$ gradle dependenciesInfo :distribution:generateDependenciesReport -Dbuild.branch=6.x -Dcsv=/tmp/elasticsearch-dependencies.csv
We disable these tests because the JVM flags we use will not start with
JDK 10. Since we do not support running these old versions on newer JDKs
anyway, this commit disables testing of these when running on JDK 10.
This commit moves GlobalCheckpointTracker from the engine to IndexShard, where it better fits logically: Tracking the global checkpoint based on the local checkpoints of all shards in the replication group is not a property of the engine, but rather a property fulfilled by the current primary shard. The LocalCheckpointTracker on the other hand is driven by the contents of the local translog. By moving GlobalCheckpointTracker to IndexShard, it makes little sense to keep the SequenceNumbersService class around - it would only wrap the LocalCheckpointTracker. This commit therefore removes the class and replaces occurrences of SequenceNumbersService in the engine directly by LocalCheckpointTracker.
This reverts commit e04e5ab037 as we no longer need the increased
logging for the mixed cluster tests. This will reduce the size of logs for some build failures.
If you assert that a pattern of files exists but it matches more then
one file the "assert this file exists" code failed with a misleading
error message. This tests if the patter resolved to multiple files and
prints a better error message if it did.
For too long we have been groping around in the dark when faced with GC
issues because we rarely have GC logs at our disposal. This commit
enables GC logging by default out of the box.
Relates #27610
Any CLI commands that depend on core Elasticsearch might touch classes
(directly or indirectly) that depends on logging. If they do this and
logging is not configured, Log4j will dump status error messages to the
console. As such, we need to ensure that any such CLI command configures
logging (with a trivial configuration that dumps log messages to the
console). Previously we did this in the base CLI command but with the
refactoring of this class out of core Elasticsearch, we no longer
configure logging there (since we did not want this class to depend on
settings and logging). However, this meant for some CLI commands (like
the plugin CLI) we were no longer configuring logging. This commit adds
base classes between the low-level command and multi-command classes
that ensure that logging is configured. Any CLI command that depends on
core Elasticsearch should use this infrastructure to ensure logging is
configured. There is one exception to this: Elasticsearch itself because
it takes reponsibility into its own hands for configuring logging from
Elasticsearch settings and log4j2.properties. We preserve this special
status.
Relates #27523
Today we require users to prepare their indices for split operations.
Yet, we can do this automatically when an index is created which would
make the split feature a much more appealing option since it doesn't have
any 3rd party prerequisites anymore.
This change automatically sets the number of routinng shards such that
an index is guaranteed to be able to split once into twice as many shards.
The number of routing shards is scaled towards the default shard limit per index
such that indices with a smaller amount of shards can be split more often than
larger ones. For instance an index with 1 or 2 shards can be split 10x
(until it approaches 1024 shards) while an index created with 128 shards can only
be split 3x by a factor of 2. Please note this is just a default value and users
can still prepare their indices with `index.number_of_routing_shards` for custom
splitting.
NOTE: this change has an impact on the document distribution since we are changing
the hash space. Documents are still uniformly distributed across all shards but since
we are artificually changing the number of buckets in the consistent hashign space
document might be hashed into different shards compared to previous versions.
This is a 7.0 only change.
Today Cross Cluster Search requires at least one node in each remote cluster to be up once the cross cluster search is run. Otherwise the whole search request fails despite some of the data (either local and/or remote) is available. This happens when performing the _search/shards calls to find out which remote shards the query has to be executed on. This scenario is different from shard failures that may happen later on when the query is actually executed, in case e.g. remote shards are missing, which is not going to fail the whole request but rather yield partial results, and the _shards section in the response will indicate that.
This commit introduces a boolean setting per cluster called search.remote.$cluster_alias.skip_if_disconnected, set to false by default, which allows to skip certain clusters if they are down when trying to reach them through a cross cluster search requests. By default all clusters are mandatory.
Scroll requests support such setting too when they are first initiated (first search request with scroll parameter), but subsequent scroll rounds (_search/scroll endpoint) will fail if some of the remote clusters went down meanwhile.
The search API response contains now a new _clusters section, similar to the _shards section, that gets returned whenever one or more clusters were disconnected and got skipped:
"_clusters" : {
"total" : 3,
"successful" : 2,
"skipped" : 1
}
Such section won't be part of the response if no clusters have been skipped.
The per cluster skip_unavailable setting value has also been added to the output of the remote/info API.
Projects the depend on the CLI currently depend on core. This should not
always be the case. The EnvironmentAwareCommand will remain in :core,
but the rest of the CLI components have been moved into their own
subproject of :core, :core:cli.
Currently, we are using a plain TransportRequestHandler to post snapshot
status messages to the master. However, it doesn't have a robust retry
mechanism as TransportMasterNodeAction. This change migrates from
TransportRequestHandler to TransportMasterNodeAction for the new
versions and keeps the current implementation for the old versions.
Closes#27151
When the vagrant box is very very slow, the elasticsearch service can
take more than 60 sec to start. This commit changes the timeout to 120.
closes#27372
* REST: Rename ingest.processor.grok to ingest.processor_grok
* REST: Rename remote.info to cluster.remote_info
* REST: Fixed bad YAML comments
* REST: Force dummy scripts to be strings, not numbers
* REST: Fix bad YAML in search/110_field_collapsing.yml
* REST: Adjust percentile tests to work with Perl number handling
extract all clauses from a conjunction query.
When clauses from a conjunction are extracted the number of clauses is
also stored in an internal doc values field (minimum_should_match field).
This field is used by the CoveringQuery and allows the percolator to
reduce the number of false positives when selecting candidate matches and
in certain cases be absolutely sure that a conjunction candidate match
will match and then skip MemoryIndex validation. This can greatly improve
performance.
Before this change only a single clause was extracted from a conjunction
query. The percolator tried to extract the clauses that was rarest in order
(based on term length) to attempt less candidate queries to be selected
in the first place. However this still method there is still a very high
chance that candidate query matches are false positives.
This change also removes the influencing query extraction added via #26081
as this is no longer needed because now all conjunction clauses are extracted.
https://www.elastic.co/guide/en/elasticsearch/reference/6.x/percolator.html#_influencing_query_extractionCloses#26307
If an out of memory error is thrown while merging, today we quietly
rewrap it into a merge exception and the out of memory error is
lost. Instead, we need to rethrow out of memory errors, and in fact any
fatal error here, and let those go uncaught so that the node is torn
down. This commit causes this to be the case.
Relates #27265
The warnings headers have a fairly limited set of valid characters
(cf. quoted-text in RFC 7230). While we have assertions that we adhere
to this set of valid characters ensuring that our warning messages do
not violate the specificaion, we were neglecting the possibility that
arbitrary user input would trickle into these warning headers. Thus,
missing here was tests for these situations and encoding of characters
that appear outside the set of valid characters. This commit addresses
this by encoding any characters in a deprecation message that are not
from the set of valid characters.
Relates #27269
Only tests should use the single argument Environment constructor. To
enforce this the single arg Environment constructor has been replaced with
a test framework factory method.
Production code (beyond initial Bootstrap) should always use the same
Environment object that Node.getEnvironment() returns. This Environment
is also available via dependency injection.
Prior to this change if the `bwcTest` task is run then it would create
task for each version, but each task in reality would use wireCompatVersions - 1
ES version. So we were not actually testing against 5.6.x versions in the
6.x and 6.0 branches.
This commit adjusts the assertions for the sequence number BWC tests to
account for the fact that sometimes these tests are run in
mixed-clusters with 5.6 nodes (that do not understand sequence numbers),
and sometimes these tests are run in mixed-cluster with 6.0+ nodes (that
all understood sequence numbers).
Relates #27251
Windows handles trying to read a file that does not exist because a
component of the path is not a directory differently than other OS
handle this situation. This commit adjusts these assertions for Windows.
Finder creates these files if you browse a directory there. These files
are really annoying, but it's an incredible pain for users that these
files are created unbeknownst to them, and then they get in the way of
Elasticsearch starting. This commit adds leniency on macOS only to skip
these files.
Relates #27108
Today all these API calls have a sideeffect of making documents visible
to search requests. While this is sometimes desired it's an unnecessary sideeffect
and now that we have an internal (engine-private) index reader (#26972) we artificially
add a refresh call for bwc. This change removes this sideeffect in 7.0.
The rolling-upgrade test was only writing the "minimum_master_nodes" setting to the configuration file of the old nodes, but not the upgraded ones.
Also changes the value of "minimum_master_nodes" from "number_of_nodes" to "(number_of_nodes / 2) + 1".
Today we return a `String[]` that requires copying values for every
access. Yet, we already store the setting as a list so we can also directly
return the unmodifiable list directly. This makes list / array access in settings
a much cheaper operation especially if lists are large.
The shard preference _primary, _replica and its variants were useful
for the asynchronous replication. However, with the current impl, they
are no longer useful and should be removed.
Closes#26335
The single shard optimization that we have in our search api changes the type of response returned by the query transport action name based on the shard search request. if the request goes to one shard, we will do query and fetch at the same time, hence the response will be different. The proxying layer used in cross cluster search was not aware of this distinction, which causes serialization issues every time a cross cluster search request goes to a single shard and goes through a gateway node which has to forward the shard request to a data node. The coordinating node would then expect a QueryFetchSearchResult while the gateway would return a QuerySearchResult.
Closes#26833
Nhat Nguyen
Jason Tedor
Nik Everett
Jim Ferenczi
Alpar Torok
Armin Braun
Ioannis Kakavas
David Roberts
David Turner
Andy Bristol
David Kyle
Luca Cavanna
Ben Abrams
Michael Basnight
Ryan Ernst
Christoph Büscher
Tanguy Leroux
Tim Brooks
Adrien Grand
Boaz Leskes
Lee Hinman
Jack Conradson
Yu
Igor Motov
Lee Hinman
Simon Willnauer
Yannick Welsch
Maxime Gréau
Alexander Reelsen
Martijn van Groningen
jaymode
Christoph Büscher
Christoph Büscher
javanna
Christoph Büscher
Clinton Gormley
Anton Pozhidaev
kel
Nhat