Today when a replicated write operation fails to execute on a replica,
the primary will reach out to the master to fail that replica (and mark
it stale). We then won't ack that request until the master removes the
failing replica; otherwise, we will lose the acked operation if the
failed replica is still in the in-sync set. However, if a node with the
primary is shutting down, we might ack such request even though we are
unable to send a shard-failure request to the master. This happens
because we ignore NodeClosedException which is triggered when the
ClusterService is being closed.
Closes#39467
Lucene added an optimization to leave the term dictionary on disk
for non-id like fields. This change happened very late in the release
processes such that it's better to have an escape hatch if certain
use-cases are hurt by this optimization. This setting might be
removed in the future if it turns out to be unnecessary.
When a node is joining the cluster we ensure that it can send requests to the
master _at that time_. If it joins the cluster and _then_ loses the ability to
send requests to the master then it should be removed from the cluster. Today
this is not the case: the master can still receive responses to its follower
checks, and receives acknowledgements to cluster state publications, so has no
reason to remove the node.
This commit changes the handling of follower checks so that they fail if they
come from a master that the other node was following but which it now believes
to have failed.
* Optimize Bulk Message Parsing and Message Length Parsing
* findNextMarker took almost 1ms per invocation during the PMC rally track
* Fixed to be about an order of magnitude faster by using Netty's bulk `ByteBuf` search
* It is unnecessary to instantiate an object (the input stream wrapper) and throw it away, just to read the `int` length from the message bytes
* Fixed by adding bulk `int` read to BytesReference
Backport support for replicating closed indices (#39499)
Before this change, closed indexes were simply not replicated. It was therefore
possible to close an index and then decommission a data node without knowing
that this data node contained shards of the closed index, potentially leading to
data loss. Shards of closed indices were not completely taken into account when
balancing the shards within the cluster, or automatically replicated through shard
copies, and they were not easily movable from node A to node B using APIs like
Cluster Reroute without being fully reopened and closed again.
This commit changes the logic executed when closing an index, so that its shards
are not just removed and forgotten but are instead reinitialized and reallocated on
data nodes using an engine implementation which does not allow searching or
indexing, which has a low memory overhead (compared with searchable/indexable
opened shards) and which allows shards to be recovered from peer or promoted
as primaries when needed.
This new closing logic is built on top of the new Close Index API introduced in
6.7.0 (#37359). Some pre-closing sanity checks are executed on the shards before
closing them, and closing an index on a 8.0 cluster will reinitialize the index shards
and therefore impact the cluster health.
Some APIs have been adapted to make them work with closed indices:
- Cluster Health API
- Cluster Reroute API
- Cluster Allocation Explain API
- Recovery API
- Cat Indices
- Cat Shards
- Cat Health
- Cat Recovery
This commit contains all the following changes (most recent first):
* c6c42a1 Adapt NoOpEngineTests after #39006
* 3f9993d Wait for shards to be active after closing indices (#38854)
* 5e7a428 Adapt the Cluster Health API to closed indices (#39364)
* 3e61939 Adapt CloseFollowerIndexIT for replicated closed indices (#38767)
* 71f5c34 Recover closed indices after a full cluster restart (#39249)
* 4db7fd9 Adapt the Recovery API for closed indices (#38421)
* 4fd1bb2 Adapt more tests suites to closed indices (#39186)
* 0519016 Add replica to primary promotion test for closed indices (#39110)
* b756f6c Test the Cluster Shard Allocation Explain API with closed indices (#38631)
* c484c66 Remove index routing table of closed indices in mixed versions clusters (#38955)
* 00f1828 Mute CloseFollowerIndexIT.testCloseAndReopenFollowerIndex()
* e845b0a Do not schedule Refresh/Translog/GlobalCheckpoint tasks for closed indices (#38329)
* cf9a015 Adapt testIndexCanChangeCustomDataPath for replicated closed indices (#38327)
* b9becdd Adapt testPendingTasks() for replicated closed indices (#38326)
* 02cc730 Allow shards of closed indices to be replicated as regular shards (#38024)
* e53a9be Fix compilation error in IndexShardIT after merge with master
* cae4155 Relax NoOpEngine constraints (#37413)
* 54d110b [RCI] Adapt NoOpEngine to latest FrozenEngine changes
* c63fd69 [RCI] Add NoOpEngine for closed indices (#33903)
Relates to #33888
This adds a `details` parameter to shard locking in `NodeEnvironment`. This is
intended to be used for diagnosing issues such as
```
1> [2019-02-11T14:34:19,262][INFO ][o.e.c.m.MetaDataDeleteIndexService] [node_s0] [.tasks/oSYOG0-9SHOx_pfAoiSExQ] deleting index
1> [2019-02-11T14:34:19,279][WARN ][o.e.i.IndicesService ] [node_s0] [.tasks/oSYOG0-9SHOx_pfAoiSExQ] failed to delete index
1> org.elasticsearch.env.ShardLockObtainFailedException: [.tasks][0]: obtaining shard lock timed out after 0ms
1> at org.elasticsearch.env.NodeEnvironment$InternalShardLock.acquire(NodeEnvironment.java:736) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.shardLock(NodeEnvironment.java:655) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.lockAllForIndex(NodeEnvironment.java:601) ~[main/:?]
1> at org.elasticsearch.env.NodeEnvironment.deleteIndexDirectorySafe(NodeEnvironment.java:554) ~[main/:?]
```
In the hope that we will be able to determine why the shard is still locked.
Relates to #30290 as well as some other CI failures
there are testing situations where newly created indices
are being wiped before they are fully initialized. This results
in an edge-case in the shard-locking strategy where an index
cannot be deleted.
This should fix that
Currently there are two security tests that specifically target the
netty security transport. This PR moves the client authentication tests
into `AbstractSimpleSecurityTransportTestCase` so that the nio transport
will also be tested.
Additionally the work to build transport configurations is moved out of
the netty transport and tested independently.
This commit is the final piece of the integration of CCR with retention
leases. Namely, we periodically renew retention leases and advance the
retaining sequence number while following.
With this change, we won't wait for the local checkpoint to advance to
the max_seq_no before starting phase2 of peer-recovery. We also remove
the sequence number range check in peer-recovery. We can safely do these
thanks to Yannick's finding.
The replication group to be used is currently sampled after indexing
into the primary (see `ReplicationOperation` class). This means that
when initiating tracking of a new replica, we have to consider the
following two cases:
- There are operations for which the replication group has not been
sampled yet. As we initiated the new replica as tracking, we know that
those operations will be replicated to the new replica and follow the
typical replication group semantics (e.g. marked as stale when
unavailable).
- There are operations for which the replication group has already been
sampled. These operations will not be sent to the new replica. However,
we know that those operations are already indexed into Lucene and the
translog on the primary, as the sampling is happening after that. This
means that by taking a snapshot of Lucene or the translog, we will be
getting those ops as well. What we cannot guarantee anymore is that all
ops up to `endingSeqNo` are available in the snapshot (i.e. also see
comment in `RecoverySourceHandler` saying `We need to wait for all
operations up to the current max to complete, otherwise we can not
guarantee that all operations in the required range will be available
for replaying from the translog of the source.`). This is not needed,
though, as we can no longer guarantee that max seq no == local
checkpoint.
Relates #39000Closes#38949
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
* The lambda invoked by the `lockedExecutor` eventually gets JITed (which runs a static initializer that we will suspend in with a very tiny chance).
* Fixed by creating the `Runnable` in the main test thread and using the same instance in all threads
* Closes#35686
Currently remote compression and ping schedule settings are dynamic.
However, we do not listen for changes. This commit adds listeners for
changes to those two settings. Additionally, when those settings change
we now close existing connections and open new ones with the settings
applied.
Fixes#37201.
* Simplify and Fix Synchronization in InternalTestCluster (#39168)
* Remove unnecessary `synchronized` statements
* Make `Predicate`s constants where possible
* Cleanup some stream usage
* Make unsafe public methods `synchronized`
* Closes#37965
* Closes#37275
* Closes#37345
There may be situations where indices have not yet been closed from a Lucene
perspective, causing the breaker to not immediately be at 0
Relates to #30290
This commit introduces the retention leases to ESIndexLevelReplicationTestCase,
then adds some tests verifying that the retention leases replication works
correctly in spite of the presence of the primary failover or out of order
delivery of retention leases sync requests.
Relates #37165
Rollup jobs should be stopped + deleted before the indices are removed.
It's possible for an active rollup job to issue a bulk request, the test
ends and the cleanup code deletes all indices. The in-flight bulk
request will then stall + error because the index no-longer exists...
but this process might take longer than the StopRollup timeout.
Which means the test fails, and often fails several other tests since
the job is still active (e.g. other tests cannot create the same-named
job, or fail to stop the job in their cleanup because it's still stalled).
This tends to knock over several tests before the bulk finally times
out and the job shuts down.
Instead, we need to simply stop jobs first. Inflight bulks will resolve
quickly, and we can carry on with deleting indices after the jobs are
confirmed inactive.
stop-job.asciidoc tended to trigger this issue because it executed
an async stop API and then exited, which setup the above situation. In
can and did happen with other tests though. As an extra precaution,
the doc test was modified to substitute in wait_for_completion
to help head off these issues too.
* Disable specific locales for tests in fips mode
The Bouncy Castle FIPS provider that we use for running our tests
in fips mode has an issue with locale sensitive handling of Dates as
described in https://github.com/bcgit/bc-java/issues/405
This causes certificate validation to fail if any given test that
includes some form of certificate validation happens to run in one
of the locales. This manifested earlier in #33081 which was
handled insufficiently in #33299
This change ensures that the problematic 3 locales
* th-TH
* ja-JP-u-ca-japanese-x-lvariant-JP
* th-TH-u-nu-thai-x-lvariant-TH
will not be used when running our tests in a FIPS 140 JVM. It also
reverts #33299
Today when processing an operation on a replica engine (or the
following engine), we first add it to Lucene, then add it to translog,
then finally marks its seq_no as completed. If a flush occurs after step1,
but before step-3, the max_seq_no in the commit's user_data will be
smaller than the seq_no of some documents in the Lucene commit.
This test failed on 7.1 when running full cluster restart tests against pre-7.0
clusters (e.g. 6.6 clusters). The fixes the expected type in the
templates after the cluster restart.
Backport of #38903
When tearing down from `ESSingleNodeTestCase` we perform a delete on "*"
indices, it some cases, however, those indices are not fully deleted. Rather
than have a failure occur later down the change (see:
https://github.com/elastic/elasticsearch/issues/30290#issuecomment-463589008 )
the failure should occurr immediately so it can be diagnosed more easily.
Instead of using `WarningsHandler.PERMISSIVE`, we only match warnings
that are due to types removal.
This PR also renames `allowTypeRemovalWarnings` to `allowTypesRemovalWarnings`.
Relates to #37920.
There were two documents (seq=2 and seq=103) missing on the follower in
one of the failures of `testFailOverOnFollower`. I spent several hours
on that failure but could not figure out the reason. I adjust log and
unmute this test so we can collect more information.
Relates #38633
Adds the ability to fetch chunks from different files in parallel, configurable using the new `ccr.indices.recovery.max_concurrent_file_chunks` setting, which defaults to 5 in this PR.
The implementation uses the parallel file writer functionality that is also used by peer recoveries.
When we are preparing to release a major version the rules around
"unreleased" versions and branches get a bit more complex.
This change implements the following rules:
- If the tip version on the previous major is a .0 (e.g. 6.7.0) then
the tip of the minor before that (e.g. 6.6.1) must be unreleased.
(This is because 6.7.0 would be "staged" in preparation for release,
but 6.6.1 would be open for bug fixes on the release 6.6.x line)
(in VersionCollection & VersionUtils)
- The "major.x" branch (if it exists) will always point to the latest
minor in that series. Anything that is not the latest minor, must
therefore be on a the "major.minor" branch
For example, if v7.1.0 exists then the "7.x" branch must be 7.1.0,
and 7.0.0 must be on the "7.0" branch
(in VersionCollection)
This commit adds the 7.1 version constant to the 7.x branch.
Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
In #38333 and #38350 we moved away from the `discovery.zen` settings namespace
since these settings have an effect even though Zen Discovery itself is being
phased out. This change aligns the documentation and the names of related
classes and methods with the newly-introduced naming conventions.
We have had various reports of problems caused by the maxRetryTimeout
setting in the low-level REST client. Such setting was initially added
in the attempts to not have requests go through retries if the request
already took longer than the provided timeout.
The implementation was problematic though as such timeout would also
expire in the first request attempt (see #31834), would leave the
request executing after expiration causing memory leaks (see #33342),
and would not take into account the http client internal queuing (see #25951).
Given all these issues, it seems that this custom timeout mechanism
gives little benefits while causing a lot of harm. We should rather rely
on connect and socket timeout exposed by the underlying http client
and accept that a request can overall take longer than the configured
timeout, which is the case even with a single retry anyways.
This commit removes the `maxRetryTimeout` setting and all of its usages.
Currently the snapshot/restore process manually sets the global
checkpoint to the max sequence number from the restored segements. This
does not work for Ccr as this will lead to documents that would be
recovered in the normal followering operation from being recovered.
This commit fixes this issue by setting the initial global checkpoint to
the existing local checkpoint.
With this change we no longer support pluggable discovery implementations. No
known implementations of `DiscoveryPlugin` actually override this method, so in
practice this should have no effect on the wider world. However, we were using
this rather extensively in tests to provide the `test-zen` discovery type. We
no longer need a separate discovery type for tests as we no longer need to
customise its behaviour.
Relates #38410
Today we throw a fatal `RuntimeException` if an exception occurs in
`getMasterName()`, and this includes the case where there is currently no
master. However, sometimes we call this method inside an `assertBusy()` in
order to allow for a cluster that is in the process of stabilising and electing
a master. The trouble is that `assertBusy()` only retries on an
`AssertionError` and not on a general `RuntimeException`, so the lack of a
master is immediately fatal.
This commit fixes the issue by asserting there is a master, triggering a retry
if there is not.
Fixes#38331
Renames the following settings to remove the mention of `zen` in their names:
- `discovery.zen.hosts_provider` -> `discovery.seed_providers`
- `discovery.zen.ping.unicast.concurrent_connects` -> `discovery.seed_resolver.max_concurrent_resolvers`
- `discovery.zen.ping.unicast.hosts.resolve_timeout` -> `discovery.seed_resolver.timeout`
- `discovery.zen.ping.unicast.hosts` -> `discovery.seed_addresses`
X-Pack security supports built-in authentication service
`token-service` that allows access tokens to be used to
access Elasticsearch without using Basic authentication.
The tokens are generated by `token-service` based on
OAuth2 spec. The access token is a short-lived token
(defaults to 20m) and refresh token with a lifetime of 24 hours,
making them unsuitable for long-lived or recurring tasks where
the system might go offline thereby failing refresh of tokens.
This commit introduces a built-in authentication service
`api-key-service` that adds support for long-lived tokens aka API
keys to access Elasticsearch. The `api-key-service` is consulted
after `token-service` in the authentication chain. By default,
if TLS is enabled then `api-key-service` is also enabled.
The service can be disabled using the configuration setting.
The API keys:-
- by default do not have an expiration but expiration can be
configured where the API keys need to be expired after a
certain amount of time.
- when generated will keep authentication information of the user that
generated them.
- can be defined with a role describing the privileges for accessing
Elasticsearch and will be limited by the role of the user that
generated them
- can be invalidated via invalidation API
- information can be retrieved via a get API
- that have been expired or invalidated will be retained for 1 week
before being deleted. The expired API keys remover task handles this.
Following are the API key management APIs:-
1. Create API Key - `PUT/POST /_security/api_key`
2. Get API key(s) - `GET /_security/api_key`
3. Invalidate API Key(s) `DELETE /_security/api_key`
The API keys can be used to access Elasticsearch using `Authorization`
header, where the auth scheme is `ApiKey` and the credentials, is the
base64 encoding of API key Id and API key separated by a colon.
Example:-
```
curl -H "Authorization: ApiKey YXBpLWtleS1pZDphcGkta2V5" http://localhost:9200/_cluster/health
```
Closes#34383
Relax test warning message checking to pre-empt PR 38022 landing in 6.7 with new warning messages.
The relaxed test now just assumes any warning message starting with “[types removal]” is tolerated rather than the precise phrasing used in the 6.7 branch.
This commit introduces a background sync for retention leases. The idea
here is that we do a heavyweight sync when adding a new retention lease,
and then periodically we want to background sync any retention lease
renewals to the replicas. As long as the background sync interval is
significantly lower than the extended lifetime of a retention lease, it
is okay if from time to time a replica misses a sync (it will still have
an older version of the lease that is retaining more data as we assume
that renewals do not decrease the retaining sequence number). There are
two follow-ups that will come after this commit. The first is to address
the fact that we have not adapted the should periodically flush logic to
possibly flush the retention leases. We want to do something like flush
if we have not flushed in the last five minutes and there are renewed
retention leases since the last time that we flushed. An additional
follow-up will remove the syncing of retention leases when a retention
lease expires. Today this sync could be invoked in the background by a
merge operation. Rather, we will move the syncing of retention lease
expiration to be done under the background sync. The background sync
will use the heavyweight sync (write action) if a lease has expired, and
will use the lightweight background sync (replication action) otherwise.
Today the following settings in the `discovery.zen` namespace are still used:
- `discovery.zen.no_master_block`
- `discovery.zen.hosts_provider`
- `discovery.zen.ping.unicast.concurrent_connects`
- `discovery.zen.ping.unicast.hosts.resolve_timeout`
- `discovery.zen.ping.unicast.hosts`
This commit deprecates all other settings in this namespace so that they can be
removed in the next major version.
Today we have DiscoveryDisruptionIT tests for checking that discovery can still
work once the cluster has formed, even if the cluster is misconfigured and only
has a single master-eligible node in its unicast hosts list. In fact with Zen2
we can go one better: we do not need any nodes in the unicast hosts list,
because nodes also use the contents of the last-committed cluster state for
discovery. Additionally, the DiscoveryDisruptionIT tests were failing due to
the overenthusiastic fault-detection timeouts.
This commit replaces these tests with deterministic `CoordinatorTests` that
verify the same behaviour. It also removes some duplication by extracting a
test method called `testFollowerCheckerAfterMasterReelection()`
Closes#37687
Because concurrent sync requests from a primary to its replicas could be
in flight, it can be the case that an older retention leases collection
arrives and is processed on the replica after a newer retention leases
collection has arrived and been processed. Without a defense, in this
case the replica would overwrite the newer retention leases with the
older retention leases. This commit addresses this issue by introducing
a versioning scheme to retention leases. This versioning scheme is used
to resolve out-of-order processing on the replica. We persist this
version into Lucene and restore it on recovery. The encoding of
retention leases is starting to get a little ugly. We can consider
addressing this in a follow-up.
This PR removes the temporary change we made to the yml test harness in #37285
to automatically set `include_type_name` to `true` in index creation requests
if it's not already specified. This is possible now that the vast majority of
index creation requests were updated to be typeless in #37611. A few additional
tests also needed updating here.
Additionally, this PR updates the test harness to set `include_type_name` to
`false` in index creation requests when communicating with 6.x nodes. This
mirrors the logic added in #37611 to allow for typeless document write requests
in test set-up code. With this update in place, we can remove many references
to `include_type_name: false` from the yml tests.
Currently, there are a few tests that use autoMinMasterNodes=false and
hence override addExtraClusterBootstrapSettings, mostly this is 10-30
lines of codes that are copy-pasted from class to class.
This PR introduces `InternalTestCluster.setBootstrapMasterNodeIndex`
which is suitable for all classes and copy-paste could be removed.
Removing code is always a good thing!
* Fixes two broken spots:
1. Master failover while deleting a snapshot that has no shards will get stuck if the new master finds the 0-shard snapshot in `INIT` when deleting
2. Aborted shards that were never seen in `INIT` state by the `SnapshotsShardService` will not be notified as failed, leading to the snapshot staying in `ABORTED` state and never getting deleted with one or more shards stuck in `ABORTED` state
* Tried to make fixes as short as possible so we can backport to `6.x` with the least amount of risk
* Significantly extended test infrastructure to reproduce the above two issues
* Two new test runs:
1. Reproducing the effects of node disconnects/restarts in isolation
2. Reproducing the effects of disconnects/restarts in parallel with shard relocations and deletes
* Relates #32265
* Closes#32348
Implements `geotile_grid` aggregation
This patch refactors previous implementation https://github.com/elastic/elasticsearch/pull/30240
This code uses the same base classes as `geohash_grid` agg, but uses a different hashing
algorithm to allow zoom consistency. Each grid bucket is aligned to Web Mercator tiles.
When extending ESIntegTestCase are run on the same jvm, the static field in
NodeAndClusterIdConverter will throw an AlreadySet exceptions.
overriding the configuration method from Node.configureNodeAndClusterIdStateListener in the MockNode will prevent the listener registration from happening
relates #32850
Scheduler.schedule(...) would previously assume that caller handles
exception by calling get() on the returned ScheduledFuture.
schedule() now returns a ScheduledCancellable that no longer gives
access to the exception. Instead, any exception thrown out of a
scheduled Runnable is logged as a warning.
This is a continuation of #28667, #36137 and also fixes#37708.
This commit pushes the primary term into the replication tracker. This
is a precursor to using the primary term to resolving ordering problems
for retention leases. Namely, it can be that out-of-order retention
lease sync requests arrive on a replica. To resolve this, we need a
tuple of (primary term, version). For this to be, the primary term needs
to be accessible in the replication tracker. As the primary term is part
of the replication group anyway, this change conceptually makes sense.
With #37566 we have introduced the ability to merge multiple search responses into one. That makes it possible to expose a new way of executing cross-cluster search requests, that makes CCS much faster whenever there is network latency between the CCS coordinating node and the remote clusters. The coordinating node can now send a single search request to each remote cluster, which gets reduced by each one of them. from + size results are requested to each cluster, and the reduce phase in each cluster is non final (meaning that buckets are not pruned and pipeline aggs are not executed). The CCS coordinating node performs an additional, final reduction, which produces one search response out of the multiple responses received from the different clusters.
This new execution path will be activated by default for any CCS request unless a scroll is provided or inner hits are requested as part of field collapsing. The search API accepts now a new parameter called ccs_minimize_roundtrips that allows to opt-out of the default behaviour.
Relates to #32125
Today we pass `discovery.zen.minimum_master_nodes` to nodes started up in
tests, but for 7.x nodes this setting is not required as it has no effect.
This commit removes this setting so that nodes are started with more realistic
configurations, and deprecates it.
This drops the option for tests to disable strict deprecation mode in
the low level rest client in favor of configuring expected warnings on
any calls that should expect warnings. This behavior is
paranoid-by-default which is generally the right way to handle
deprecations and tests in general.
This PR attempts to remove all typed calls from our YAML REST tests. The PR adds include_type_name: false to create index requests that use a mapping and also to put mapping requests. It also removes _type from index requests where they haven't already been removed. The PR ignores tests named *_with_types.yml since this are specifically testing typed API behaviour.
The change also includes changing the test harness to add the type _doc to index, update, get and bulk requests that do not specify the document type when the test is running against a mixed 7.x/6.x cluster.
This is related to #35975. It adds a action timeout setting that allows
timeouts to be applied to the individual transport actions that are
used during a ccr recovery.
In order to support JSON log format, a custom pattern layout was used and its configuration is enclosed in ESJsonLayout. Users are free to use their own patterns, but if smooth Beats integration is needed, they should use ESJsonLayout. EvilLoggerTests are left intact to make sure user's custom log patterns work fine.
To populate additional fields node.id and cluster.uuid which are not available at start time,
a cluster state update will have to be received and the values passed to log4j pattern converter.
A ClusterStateObserver.Listener is used to receive only one ClusteStateUpdate. Once update is received the nodeId and clusterUUid are set in a static field in a NodeAndClusterIdConverter.
Following fields are expected in JSON log lines: type, tiemstamp, level, component, cluster.name, node.name, node.id, cluster.uuid, message, stacktrace
see ESJsonLayout.java for more details and field descriptions
Docker log4j2 configuration is now almost the same as the one use for ES binary.
The only difference is that docker is using console appenders, whereas ES is using file appenders.
relates: #32850
This commit introduces retention lease syncing from the primary to its
replicas when a new retention lease is added. A follow-up commit will
add a background sync of the retention leases as well so that renewed
retention leases are synced to replicas.
* Remove empty statements
There are a couple of instances of undocumented empty statements all across the
code base. While they are mostly harmless, they make the code hard to read and
are potentially error-prone. Removing most of these instances and marking blocks
that look empty by intention as such.
* Change test, slightly more verbose but less confusing
This commit changes the default for the `track_total_hits` option of the search request
to `10,000`. This means that by default search requests will accurately track the total hit count
up to `10,000` documents, requests that match more than this value will set the `"total.relation"`
to `"gte"` (e.g. greater than or equals) and the `"total.value"` to `10,000` in the search response.
Scroll queries are not impacted, they will continue to count the total hits accurately.
The default is set back to `true` (accurate hit count) if `rest_total_hits_as_int` is set in the search request.
I choose `10,000` as the default because that's also the number we use to limit pagination. This means that users will be able to know how far they can jump (up to 10,000) even if the total number of hits is not accurate.
Closes#33028
From #29453 and #37285, the include_type_name parameter was already present and defaulted to false. This PR makes the following updates:
* Add deprecation warnings to RestCreateIndexAction, plus tests in RestCreateIndexActionTests.
* Add a typeless 'create index' method to the Java HLRC, and deprecate the old typed version. To do this cleanly, I created new CreateIndexRequest and CreateIndexResponse objects that differ from the existing server ones.
elasticsearch-node tool helps to restore cluster if half or more of
master eligible nodes are lost. Of course, all bets are off, regarding
data consistency.
There are two parts of the tool: unsafe-bootstrap to be used when there
is still at least one master-eligible node alive and detach-cluster,
when there are no master-eligible nodes left.
This commit implements the first part.
Docs for the tool will be added separately as a part of #37812.
This change split out all the specific GeoHash
classes for the geohash_grid aggregation into
abstract GeoGrid classes that can be re-used for
specific hashing types, like `geohash`
* Testing conventions now checks for tests in main
This is the last outstanding feature of the old NamingConventionsTask,
so time to remove it.
* PR review
The assertion `assertOpsOnPrimary` does not store seq_no and primary
term of successful deletes to the `lastOpSeqNo` and `lastOpTerm`. This
leads to failures of the subsequence CAS deletes or indexes with seq_no
and term. Moreover, this assertion trips a translog assertion because it
bumps the primary term of some operations but not the primary term of
the engine.
Relates #36467Closes#37684
Exceptions thrown by the cluster applier service's settings and cluster appliers are bubbled up, and
block the state from being applied instead of silently being ignored. In combination with the cluster
state publishing lag detector, this will throw a node out of the cluster that can't properly apply
cluster state updates.
This commit moves the aggregation and mapping code from joda time to
java time. This includes field mappers, root object mappers, aggregations with date
histograms, query builders and a lot of changes within tests.
The cut-over to java time is a requirement so that we can support nanoseconds
properly in a future field mapper.
Relates #27330
Users may require the sequence number and primary terms to perform optimistic concurrency control operations. Currently, you can get the sequence number via the `docvalues_fields` API but the primary term is not accessible because it is maintained by the `SeqNoFieldMapper` and the infrastructure can't find it.
This commit adds a dedicated sub fetch phase to return both numbers that is connected to a new `seq_no_primary_term` parameter.
* Fail start of non-data node if node has data
Check that nodes started with node.data=false cannot start if they have
shard data to avoid (old) indexes being resurrected into the cluster in red status.
Issue #27073
This commit introduces a NetworkMessage class. This class has two
subclasses - InboundMessage and OutboundMessage. These messages can
be serialized and deserialized independent of the transport. This allows
more granular testing. Additionally, the serialization mechanism is now
a simple Supplier. This builds the framework to eventually move the
serialization of transport messages to the network thread. This is the
one serialization component that is not currently performed on the
network thread (transport deserialization and http serialization and
deserialization are all on the network thread).
Currently we create dedicated network threads for both the http and
transport implementations. Since these these threads should never
perform blocking operations, these threads could be shared. This commit
modifies the nio-transport to have 0 http workers be default. If the
default configs are used, this will cause the http transport to be run
on the transport worker threads. The http worker setting will still exist
in case the user would like to configure dedicated workers. Additionally,
this commmit deletes dedicated acceptor threads. We have never had these
for the netty transport and they can be added back if a need is
determined in the future.
From #29453 and #37285, the `include_type_name` parameter was already present and defaulted to false. This PR makes the following updates:
- Add deprecation warnings to `RestPutMappingAction`, plus tests in `RestPutMappingActionTests`.
- Add a typeless 'put mappings' method to the Java HLRC, and deprecate the old typed version. To do this cleanly, I opted to create a new `PutMappingRequest` object that differs from the existing server one.
Some tests (e.g. testRestoreIndexWithShardsMissingInLocalGateway) were split-braining since
being switched to Zen2 because the bootstrap setting was left around when nodes got restarted
with data folders wiped.
The test in question here was starting one node (which autobootstrapped to that single node), then
another node. The first node was then shut down (after excluding it from the voting configuration),
its data folder wiped, and restarted. After restart, the node had an empty data folder yet
initial_master_nodes set to itself (i.e. same name). This made the node sometimes form a cluster of
its own, and not rejoin the existing cluster with the other node.
This commit removes some leniency from REST handling where we move to
reject all requests that have a body where the body is not used during
the course of handling the request. For example,
DELETE /index
{
"query" : {
"term" : {
"field" : "value"
}
}
}
is now rejected.
The AbstracLifecycleComponent used to extend AbstractComponent, so it had to pass settings to the constractor of its supper class.
It no longer extends the AbstractComponent so there is no need for this constructor
There is also no need for AbstracLifecycleComponent subclasses to have Settings in their constructors if they were only passing it over to super constructor.
This is part 1. which will be backported to 6.x with a migration guide/deprecation log.
part 2 will have this constructor removed in 7
relates #35560
relates #34488
This commit fixes the IndexShardTestCase.recoverReplica(IndexShard, IndexShard, boolean)
method where the startReplica parameter was not correctly propagated and the value
true always used instead.
This commit reformats some classes in the index universe with the
purpose of breaking some long method definitions and invocations into a
line per parameter. This has the advantage that for an upcoming change
to these definitions and invocations, the diff for that change will be a
single line per definition or invocation. That makes these sorts of
changes easier to read.
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
If the checking node no longer holds the shard copy, the assertion
assertSameDocIdsOnShards might fail. This is too harsh since the
assertion is to ensure the consistency between active copies.
Today file-chunks are sent sequentially one by one in peer-recovery. This is a
correct choice since the implementation is straightforward and recovery is
network bound in most of the time. However, if the connection is encrypted, we
might not be able to saturate the network pipe because encrypting/decrypting
are cpu bound rather than network-bound.
With this commit, a source node can send multiple (default to 2) file-chunks
without waiting for the acknowledgments from the target.
Below are the benchmark results for PMC and NYC_taxis.
- PMC (20.2 GB)
| Transport | Baseline | chunks=1 | chunks=2 | chunks=3 | chunks=4 |
| ----------| ---------| -------- | -------- | -------- | -------- |
| Plain | 184s | 137s | 106s | 105s | 106s |
| TLS | 346s | 294s | 176s | 153s | 117s |
| Compress | 1556s | 1407s | 1193s | 1183s | 1211s |
- NYC_Taxis (38.6GB)
| Transport | Baseline | chunks=1 | chunks=2 | chunks=3 | chunks=4 |
| ----------| ---------| ---------| ---------| ---------| -------- |
| Plain | 321s | 249s | 191s | * | * |
| TLS | 618s | 539s | 323s | 290s | 213s |
| Compress | 2622s | 2421s | 2018s | 2029s | n/a |
Relates #33844
This is related to #35975. It implements a file based restore in the
CcrRepository. The restore transfers files from the leader cluster
to the follower cluster. It does not implement any advanced resiliency
features at the moment. Any request failure will end the restore.
Today a peer-recovery may run into a deadlock if the value of
node_concurrent_recoveries is too high. This happens because the
peer-recovery is executed in a blocking fashion. This commit attempts
to make the recovery source partially non-blocking. I will make three
follow-ups to make it fully non-blocking: (1) send translog operations,
(2) primary relocation, (3) send commit files.
Relates #36195
* Fix PrimaryAllocationIT Race Condition
* Forcing a stale primary allocation on a green index was tripping the assertion that was removed
* Added a test that this case still errors out correctly
* Made the ability to wipe stopped datanode's data public on the internal test cluster and used it to ensure correct behaviour on the fixed test
* Previously it simply passed because the test finished before the index went green and would NPE when the index was green at the time of the shard store status request, that would then come up empty
* Closes#37345
This commit moves DisruptableMockTransport to use a more accurate representation of connection
management, which allows to use the full connection manager and does not require mocking out
any behavior. With this, we can implement restarting nodes in CoordinatorTests.
This commit makes the use of empty retention lease suppliers to always
be an empty list as opposed to in some cases an empty set. This commit
is solely for consistency reasons, there is no functional change here.
Adds join validation to Zen2, which prevents a node from joining a cluster when the node does not
have the right ES version or does not satisfy any other of the join validation constraints.
* Tests: Add ElasticsearchAssertions.awaitLatch method
Some tests are using assertTrue(latch.await(...)) in their code. This
leads to an assertion error without any error message. This adds a
method which has a nicer error message and can be used in tests.
* fix forbidden apis
* fix spaces
* TESTS: Real Coordinator in SnapshotServiceTests
* Introduce real coordinator in SnapshotServiceTests to be able to test network disruptions realistically
* Make adjustments to cluster applier service so that we can pass a mocked single threaded executor for tests
Nhat Nguyen
Simon Willnauer
David Turner
Armin Braun
Yannick Welsch
Adrien Grand
Tanguy Leroux
Lee Hinman
Tal Levy
Tim Brooks
Jason Tedor
Marios Trivyzas
Ioannis Kakavas
David Roberts
Christoph Büscher
Julie Tibshirani
Tim Vernum
Luca Cavanna
Yogesh Gaikwad
Mayya Sharipova
markharwood
Andrey Ershov
Yuri Astrakhan
Przemyslaw Gomulka
Henning Andersen
Alexander Reelsen
Nik Everett
Colin Goodheart-Smithe
Jim Ferenczi
Alpar Torok
Boaz Leskes
Marios Trivyzas
Daniel Mitterdorfer