* Painless generates a ton of duplicate strings and empty `Hashmap` instances wrapped as unmodifiable
* This change brings down the static footprint of Painless on an idle node by 20MB (after running the PMC benchmark against said node)
* Since we were looking into ways of optimizing for smaller node sizes I think this is a worthwhile optimization
This change adds the support for the RankFeatureQuery in the HLRC by
providing an extra dependency on mapper-extras-client. It also removes
the dependency on lang-painless in mapper-extras which is not needed
anymore since the move of the vector field into a dedicated module.
Closes#43634
This change removes the Reserved class used to track variables usages
within the ANTLR grammar. That task is now performed by an existing pass
"extractVariables" in the Painless AST. The Painless AST no longer has any
dependencies on the ANTLR AST for state outside of the tree being built.
This will simplify future refactoring and opens the possibility of alternate
grammars.
Currently we take the array of nio buffers from the netty channel
outbound buffer and copy their bytes to a direct buffer. In the process
we mutate the nio buffer positions. It seems like netty will continue to
reuse these buffers. This means than any data that is not flushed in a
call is lost. This commit fixes this by incrementing the positions after
the flush has completed. This is similar to the behavior that
SocketChannel would have provided and netty relied upon.
Fixes#45444.
Elasticsearch does not grant Netty reflection access to get Unsafe. The
only mechanism that currently exists to free direct buffers in a timely
manner is to use Unsafe. This leads to the occasional scenario, under
heavy network load, that direct byte buffers can slowly build up without
being freed.
This commit disables Netty direct buffer pooling and moves to a strategy
of using a single thread-local direct buffer for interfacing with sockets.
This will reduce the memory usage from networking. Elasticsearch
currently derives very little value from direct buffer usage (TLS,
compression, Lucene, Elasticsearch handling, etc all use heap bytes). So
this seems like the correct trade-off until that changes.
The client and remote hit sources had each their own retry mechanism,
which would do the same. Supporting resiliency we would have to expand
on the retry mechanisms and as a preparation for that, the retry
mechanism is now shared such that each sub class is only responsible for
sending requests and converting responses/failures to common format.
Part of #42612
This change adds a compiler pass to give each node the chance to store
settings necessary for analysis and writing. This removes the need to pass
this in a somewhat convoluted way through an additional class called
Reserved, and also removes the need to have the Walker set values for
settings on reserved. This is next step in decoupling the Painless grammar
from the Painless AST.
This commit adds a helper method to the ingest service allowing it to
inspect a pipeline by id and verify the existence of a processor in the
pipeline. This work exposed a potential bug in that some processors
contain inner processors that are passed in at instantiation. These
processors needed a common way to expose their inner processors, so the
WrappingProcessor was created in order to expose the inner processor.
This is the first step in decoupling the Painless AST from the grammar. The
Painless AST should be able to generate classes independently of how the
AST is generated from a grammar. (If I were to build a Painless AST by hand
in code this should be all that's necessary.) This change removes Lambda
name generation from the ANTLR grammar tree walker. It also removes
unnecessary node generation of new array function references from the
tree walker as well.
Uses JDK 11's per-socket configuration of TCP keepalive (supported on Linux and Mac), see
https://bugs.openjdk.java.net/browse/JDK-8194298, and exposes these as transport settings.
By default, these options are disabled for now (i.e. fall-back to OS behavior), but we would like
to explore whether we can enable them by default, in particular to force keepalive configurations
that are better tuned for running ES.
This adjusts the `buckets_path` parser so that pipeline aggs can
select specific buckets (via their bucket keys) instead of fetching
the entire set of buckets. This is useful for bucket_script in
particular, which might want specific buckets for calculations.
It's possible to workaround this with `filter` aggs, but the workaround
is hacky and probably less performant.
- Adjusts documentation
- Adds a barebones AggregatorTestCase for bucket_script
- Tweaks AggTestCase to use getMockScriptService() for reductions and
pipelines. Previously pipelines could just pass in a script service
for testing, but this didnt work for regular aggs. The new
getMockScriptService() method fixes that issue, but needs to be used
for pipelines too. This had a knock-on effect of touching MovFn,
AvgBucket and ScriptedMetric
Currently in the transport-nio work we connect and bind channels on the
a thread before the channel is registered with a selector. Additionally,
it is at this point that we set all the socket options. This commit
moves these operations onto the event-loop after the channel has been
registered with a selector. It attempts to set the socket options for a
non-server channel at registration time. If that fails, it will attempt
to set the options after the channel is connected. This should fix
#41071.
This whitelists randomUUID with the understanding that it's possible for
/dev/random to cause blocking on *nix systems. Users that need
randomUUID should switch their random generator source to /dev/urandom
if this is a concern for them.
Reloading of synonym_graph filter doesn't work currently because the search time
AnalysisMode doesn't get propagated to the TokenFilterFactory emitted by the
graph filters getChainAwareTokenFilterFactory() method. This change fixes that.
Closes#45127
* Stop Passing Around REST Request in Multiple Spots
* Motivated by #44564
* We are currently passing the REST request object around to a large number of places. This works fine since we simply copy the full request content before we handle the rest itself which is needlessly hard on GC and heap.
* This PR removes a number of spots where the request is passed around needlessly. There are many more spots to optimize in follow-ups to this, but this one would already enable bypassing the request copying for some error paths in a follow up.
* We should not create a new wrapper object if there's no bytes in the `ByteBuf`
* We should not create a new wrapped `ByteBuf` if it can't contain a message anyway because it doesn't even have enough bytes for a header left
This is a temporary fix during the Joda to Java datetime transition. This will
implicitly cast a JodaCompatibleZonedDateTime to a ZonedDateTime for
both def and static types. This is necessary to insulate users from needing
to know about JodaCompatibleZonedDateTime explicitly.
With this change, we will return primary_term and seq_no of the current
document if an update is detected as a noop. We already return the
version; hence we should also return seq_no and primary_term.
Relates #42497
While joda no longer exists in the apis for 7.x, the compatibility layer
still exists with helper methods mimicking the behavior of joda for
ZonedDateTime objects returned for date fields in scripts. This layer
was originally intended to be removed in 7.0, but is now likely to exist
for the lifetime of 7.x.
This commit adds missing methods from ChronoZonedDateTime to the compat
class. These methods were not part of joda, but are needed to act like a
real ZonedDateTime.
relates #44411
These fields can be final, since they are set at construction, and
changing them after that could lead to some confusing test cases. This
commit allows the compiler to enforce that we never modify these values
during tests.
This commit more closely aligns the assertion that we are running in a
package distribution with disabling the systemd integration if somehow
we running on not a package distribution. This is, previously we had an
assertion that we are in a package distribution (RPM or Debian package)
but would disable the systemd integration if we are not on
Linux. Instead, we should disable the systemd integration if we are not
running in a package distribution. Because of our assertion, we expect
this to never hold, but we need a fallback for when this assertion is
violated and assertions are not enabled.
Well, we have a test here that intentionally causes an OutOfMemoryError,
to ensure that Painless handles it (I still strongly disagree with doing
this). This causes two things to happen: an OutOfMemoryError to be
dumped to the console, and the heap to be dumped to disk. This makes it
look like we had an OutOfMemoryError while running tests, and the tests
did not fail properly. This commit changes the tests configuration so
that we suppress the heap dump, which also causes the OutOfMemoryError
to no longer be dumped to the console.
Today our systemd service defaults to a service type of simple. This
means that systemd assumes Elasticsearch is ready as soon as the
ExecStart (bin/elasticsearch) process is forked off. This means that the
service appears ready long before it actually is, so before it is ready
to receive requests. It also means that services that want to depend on
Elasticsearch being ready to start can not as there is not a reliable
mechanism to determine this. This commit changes the service type to
notify. This requires that Elasticsearch sends a notification message
via libsystemd sd_notify method. This commit does that by using JNA to
invoke this native method. Additionally, we use this integration to also
notify systemd when we are stopping.
* Mute failing test
tracked in #44552
* mute EvilSecurityTests
tracking in #44558
* Fix line endings in ESJsonLayoutTests
* Mute failing ForecastIT test on windows
Tracking in #44609
* mute BasicRenormalizationIT.testDefaultRenormalization
tracked in #44613
* fix mute testDefaultRenormalization
* Increase busyWait timeout windows is slow
* Mute failure unconfigured node name
* mute x-pack internal cluster test windows
tracking #44610
* Mute JvmErgonomicsTests on windows
Tracking #44669
* mute SharedClusterSnapshotRestoreIT testParallelRestoreOperationsFromSingleSnapshot
Tracking #44671
* Mute NodeTests on Windows
Tracking #44256
This commit deprecates all constructors of HandledTransportAction
that take in a Supplier instead of a Writeable.Reader for response
objects.
in addition to the deprecation, the following modules were updated to
leverage Writeable
- modules:ingest-common
- modules:lang-mustache
relates #34389.
this commit removes usage of the deprecated
constructor with a single argument and no Writeable.Reader.
The purpose of this is to reduce the boilerplate necessary for
properly implementing a new action, as well as reducing the
chances of using the incorrect super constructor while classes
are being migrated to Writeable
relates #34389.
Today we have an annotation for controlling logging levels in
tests. This annotation serves two purposes, one is to control the
logging level used in tests, when such control is needed to impact and
assert the behavior of loggers in tests. The other use is when a test is
failing and additional logging is needed. This commit separates these
two concerns into separate annotations.
The primary motivation for this is that we have a history of leaving
behind the annotation for the purpose of investigating test failures
long after the test failure is resolved. The accumulation of these stale
logging annotations has led to excessive disk consumption. Having
recently cleaned this up, we would like to avoid falling into this state
again. To do this, we are adding a link to the test failure under
investigation to the annotation when used for the purpose of
investigating test failures. We will add tooling to inspect these
annotations, in the same way that we have tooling on awaits fix
annotations. This will enable us to report on the use of these
annotations, and report when stale uses of the annotation exist.
Due to https://issues.apache.org/jira/browse/LUCENE-8916, when you
try to use a synonym filter with the index_phrases option on a text field,
you can end up with null values in a Phrase query, leading to weird
exceptions further down the querying chain. As a workaround, this commit
disables the index_phrases optimization for queries that produce token
graphs.
Fixes#43976
* We only use this method in one place in production code and can replace that with a read -> remove it to simplify the interface
* Keep it as an implementation detail in the Azure repository
This commit moves the config that stores Cors options into the server
package. Currently both nio and netty modules must have a copy of this
config. Moving it into server allows one copy and the tests to be in a
common location.
The contract for MappedFieldType#fielddataBuilder is to throw an
IllegalArgumentException if fielddata is not supported. The rank feature mappers
were instead throwing an UnsupportedOperationException, which caused
MappedFieldType#isAggregatable to fail.
This commit moves the Supplier variant of HandledTransportAction to have
a different ordering than the Writeable.Reader variant. The Supplier
version is used for the legacy Streamable, and currently having the
location of the Writeable.Reader vs Supplier in the same place forces
using casts of Writeable.Reader to select the correct super constructor.
This change in ordering allows easier migration to Writeable.Reader.
relates #34389
Simplifies AbstractSimpleTransportTestCase to use JVM-local ports and also adds an assertion so
that cases like #44134 can be more easily debugged. The likely reason for that one is that a test,
which was repeated again and again while always spawning a fresh Gradle worker (due to Gradle
daemon) kept increasing Gradle worker IDs, causing an overflow at some point.
The base classes for transport requests and responses currently
implement Streamable and Writeable. The writeTo method on these base
classes is implemented with an empty implementation. Not only does this
complicate subclasses to think they need to call super.writeTo, but it
also can lead to not implementing writeTo when it should have been
implemented, or extendiong one of these classes when not necessary,
since there is nothing to actually implement.
This commit removes the empty writeTo from these base classes, and fixes
subclasses to not call super and in some cases implement an empty
writeTo themselves.
relates #34389
AggregatorFactory was generic over itself, but it doesn't appear we
use this functionality anywhere (e.g. to allow the super class
to declare arguments/return types generically for subclasses to
override). Most places use a wildcard constraint, and even when a
concrete type is specified it wasn't used.
But since AggFactories are widely used, this led to
the generic touching many pieces of code and making type signatures
fairly complex
Refactor ScrollableHitSource to pump data out and have a simplified
interface (callers should no longer call startNextScroll, instead they
simply mark that they are done with the previous result, triggering a
new batch of data). This eases making reindex resilient, since we will
sometimes need to rerun search during retries.
Relates #43187 and #42612
This commit changes the way we manage refreshes in the index engines.
Instead of relying on a SearcherManager, this change uses a ReaderManager that
creates ElasticsearchDirectoryReader when needed. Searchers are now created on-demand
(when acquireSearcher is called) from the current ElasticsearchDirectoryReader.
It also slightly changes the Engine.Searcher to extend IndexSearcher in order
to simplify the usage in the consumer.
This brings TokenizerFactory into line with CharFilterFactory and TokenFilterFactory,
and removes the need to pass around tokenizer names when building custom analyzers.
As this means that TokenizerFactory is no longer a functional interface, the commit also
adds a factory method to TokenizerFactory to make construction simpler.
This is a prerequisite of #42189:
* Add directory delete method to blob container specific to each implementation:
* Some notes on the implementations:
* AWS + GCS: We can simply exploit the fact that both AWS and GCS return blobs lexicographically ordered which allows us to simply delete in the same order that we receive the blobs from the listing request. For AWS this simply required listing without the delimiter setting (so we get a deep listing) and for GCS the same behavior is achieved by not using the directory mode on the listing invocation. The nice thing about this is, that even for very large numbers of blobs the memory requirements are now capped nicely since we go page by page when deleting.
* For Azure I extended the parallelization to the listing calls as well and made it work recursively. I verified that this works with thread count `1` since we only block once in the initial thread and then fan out to a "graph" of child listeners that never block.
* HDFS and FS are trivial since we have directory delete methods available for them
* Enhances third party tests to ensure the new functionality works (I manually ran them for all cloud providers)
* Add Ability to List Child Containers to BlobContainer (#42653)
* Add Ability to List Child Containers to BlobContainer
* This is a prerequisite of #42189
This commit allows bulk upserts to correctly read the default pipeline
for the concrete index that belongs to an alias.
Bulk upserts are modeled differently from normal index requests such that
the index request is a request inside of the update request. The update
request (outer) contains the index or alias name is not part of the (inner)
index request. This commit adds a secondary check against the update request
(outer) if the index request (inner) does not find an alias.
Action is a class that encapsulates meta information about an action
that allows it to be called remotely, specifically the action name and
response type. With recent refactoring, the action class can now be
constructed as a static constant, instead of needing to create a
subclass. This makes the old pattern of creating a singleton INSTANCE
both misnamed and lacking a common placement.
This commit renames Action to ActionType, thus allowing the old INSTANCE
naming pattern to be TYPE on the transport action itself. ActionType
also conveys that this class is also not the action itself, although
this change does not rename any concrete classes as those will be
removed organically as they are converted to TYPE constants.
relates #34389
The Action base class currently works for both Streamable and Writeable
response types. This commit intorduces StreamableResponseAction, for
which only the legacy Action implementions which provide newResponse()
will extend. This eliminates the need for overriding newResponse() with
an UnsupportedOperationException.
relates #34389
Currently changing resources (like dictionaries, synonym files etc...) of search
time analyzers is only possible by closing an index, changing the underlying
resource (e.g. synonym files) and then re-opening the index for the change to
take effect.
This PR adds a new API endpoint that allows triggering reloading of certain
analysis resources (currently token filters) that will then pick up changes in
underlying file resources. To achieve this we introduce a new type of custom
analyzer (ReloadableCustomAnalyzer) that uses a ReuseStrategy that allows
swapping out analysis components. Custom analyzers that contain filters that are
markes as "updateable" will automatically choose this implementation. This PR
also adds this capability to `synonym` token filters for use in search time
analyzers.
Relates to #29051
When we added support for TokenFilterFactories to specialise how they were used when parsing
synonym files, PreConfiguredTokenFilters were set up to either apply themselves, or be ignored.
This behaviour is a leftover from an earlier iteration, and also has an incorrect default.
This commit makes preconfigured token filters usable in synonym file parsing by default, and brings
those filters that should not be used into line with index-specific filter factories; in indexes created
before version 7 we emit a deprecation warning, and we throw an error in indexes created after.
Fixes#38793
Currently `AbstractQueryTestCase#testToQuery` checks the search context cachable
flag. This is a bit fragile due to the high randomization of query builders
performed by this general test. Also we might only rarely check the
"interesting" cases because they rarely get generated when fully randomizing the
query builder.
This change moved the general checks out ot #testToQuery and instead adds
dedicated cache tests for those query builders that exhibit something other than
the default behaviour.
Closes#43200
#26625 deprecated delimited_payload_filter and added tests to check
that warnings would be emitted when both a normal and pre-configured
filter were used. Unfortunately, due to a bug in the Analyze API, the pre-
configured filter check was never actually triggered, and it turns out that
the deprecation warning was not in fact being emitted in this case.
#43568 fixed the Analyze API bug, which then surfaced this on backport.
This commit ensures that the preconfigured filter also emits the warnings
and triggers an error if a new index tries to use a preconfigured
delimited_payload_filter
When a named token filter or char filter is passed as part of an Analyze API
request with no index, we currently try and build the relevant filter using no
index settings. However, this can miss cases where there is a pre-configured
filter defined in the analysis registry. One example here is the elision filter, which
has a pre-configured version built with the french elision set; when used as part
of normal analysis, this preconfigured set is used, but when used as part of the
Analyze API we end up with NPEs because it tries to instantiate the filter with
no index settings.
This commit changes the Analyze API to check for pre-configured filters in the case
that the request has no index defined, and is using a name rather than a custom
definition for a filter.
It also changes the pre-configured `word_delimiter_graph` filter and `edge_ngram`
tokenizer to make their settings consistent with the defaults used when creating
them with no settings
Closes#43002Closes#43621Closes#43582
We should throw an exception at construction time if a list of
articles is not provided, otherwise we can get random NPEs during
indexing.
Relates to #43002
Given a nested structure composed of Lists and Maps, getByPath will return the value
keyed by path. getByPath is a method on Lists and Maps.
The path is string Map keys and integer List indices separated by dot. An optional third
argument returns a default value if the path lookup fails due to a missing value.
Eg.
['key0': ['a', 'b'], 'key1': ['c', 'd']].getByPath('key1') = ['c', 'd']
['key0': ['a', 'b'], 'key1': ['c', 'd']].getByPath('key1.0') = 'c'
['key0': ['a', 'b'], 'key1': ['c', 'd']].getByPath('key2', 'x') = 'x'
[['key0': 'value0'], ['key1': 'value1']].getByPath('1.key1') = 'value1'
Throws IllegalArgumentException if an item cannot be found and a default is not given.
Throws NumberFormatException if a path element operating on a List is not an integer.
Fixes#42769
This commit modifies the RemoteInfo to clarify that a search query
must always be serialized as JSON. Additionally, it adds an assertion
to ensure that this is the case. This fixes#43406.
Additionally, this PR implements AbstractXContentTestCase for the
reindex request. This is related to #43456.
This change adds the ability to attach annotative information for
classes, methods, fields, static methods, class bindings, and
instance bindings during Painless whitelisting.
Annotations are specified as @annotation or optionally as
@annotation[parameter="argument",...].
Annotations open up the ability to specify whitelist objects as
having a short name (no_import -> @no_import) or deprecated.
Long and Double ValuesSource set the current document on the script
before executing, but Bytes was missing this method call. That meant
it was possible to generate an OutOfBoundsException when using
a "value" script (field + script) on keyword or other bytes
fields.
This adds in the method call, and a few yaml tests to verify correct
behavior.
Currently the fromXContent logic for reindex requests is implemented in
the rest action. This is inconsistent with other requests where the
logic is implemented in the request. Additionally, it requires access to
the rest action in order to parse the request. This commit moves the
logic and tests into the ReindexRequest.
This removes the previous Painless API Doc Generator prior to contexts
existing. It has been replaced with the new doc generator that uses the
documentation rest API.
This commit removes some very old test logging annotations that appeared
to be added to investigate test failures that are long since closed. If
these are needed, they can be added back on a case-by-case basis with a
comment associating them to a test failure.
This PR is a backport a of #43214 from v8.0.0
A number of the aggregation base classes have an abstract doEquals() and doHashCode() (e.g. InternalAggregation.java, AbstractPipelineAggregationBuilder.java).
Theoretically this is so the sub-classes can add to the equals/hashCode and don't need to worry about calling super.equals(). In practice, it's mostly just confusing/inconsistent. And if there are more than two levels, we end up with situations like InternalMappedSignificantTerms which has to call super.doEquals() which defeats the point of having these overridable methods.
This PR removes the do versions and just use equals/hashCode ensuring the super when necessary.
Backport of: https://github.com/elastic/elasticsearch/pull/43222
This commit replaces usages of Streamable with Writeable for the
SingleShardRequest / TransportSingleShardAction classes and subclasses of
these classes.
Note that where possible response fields were made final and default
constructors were removed.
Relates to #34389
* introduce state to the REST API specification
* change state over to stability
* CCR is no GA updated to stable
* SQL is now GA so marked as stable
* Introduce `internal` as state for API's, marks stable in terms of lifetime but unstable in terms of guarantees on its output format since it exposes internal representations
* make setting a wrong stability value, or not setting it at all an error that causes the YAML test suite to fail
* update spec files to be explicit about their stability state
* Document the fact that stability needs to be defined
Otherwise the YAML test runner will fail (with a nice exception message)
* address check style violations
* update rest spec unit tests to include stability
* found one more test spec file not declaring stability, made sure stability appears after documentation everywhere
* cluster.state is stable, mark response in some way to denote its a key value format that can be changed during minors
* mark data frame API's as beta
* remove internal and private as states for an API
* removed the wrong enum values in the Stability Enum in the previous commit
(cherry picked from commit 61c34bbd92f8f7e5f22fa411c6b682b0ebd8a99d)
A search request that partially fails with failures without an index
(index: null) in the failure would cause a parse error in reindex from
remote. This would hide the original exception, making it hard to debug
the root cause. This commit fixes this so that we can tolerate null
index entries in a search failure.
This commit fixes a race in the test for the new response format with
search templates. The test indexes a document and then executes a
search with the expectation of 0 results. In some instances, the index
will refresh prior to the search execution and 1 hit will be found
causing the test fail.
Closes#42664
The painless context api is internal and currently meant only for use in
generating docs. This commit moves the spec file for the api so that it
is only used by the test for this api, and not externally by any clients
building from the public rest spec.
If the source field name is a prefix of the target field name, the
source field still exists after rename processor has run. Adjusted test
case to handle that case.
Previously, a reindex request had two different size specifications in the body:
* Outer level, determining the maximum documents to process
* Inside the source element, determining the scroll/batch size.
The outer level size has now been renamed to max_docs to
avoid confusion and clarify its semantics, with backwards compatibility and
deprecation warnings for using size.
Similarly, the size parameter has been renamed to max_docs for
update/delete-by-query to keep the 3 interfaces consistent.
Finally, all 3 endpoints now support max_docs in both body and URL.
Relates #24344
This is related to #31908. In order to use the external version in a
reindex from remote request, the search request must be configured to
request the version (as it is not returned by default). This commit
modifies the search request to request the version. Additionally, it
modifies our current reindex from remote tests to randomly use the
external version_type.
We had this as a dependency for legacy dependencies that still needed
the Log4j 1.2 API. This appears to no longer be necessary, so this
commit removes this artifact as a dependency.
To remove this dependency, we had to fix a few places where we were
accidentally relying on Log4j 1.2 instead of Log4j 2 (easy to do, since
both APIs were on the compile-time classpath).
Finally, we can remove our custom Netty logger factory. This was needed
when we were on Log4j 1.2 and handled logging in our own unique
way. When we migrated to Log4j 2 we could have dropped this
dependency. However, even then Netty would still pick up Log4j 1.2 since
it was on the classpath, thus the advantage to removing this as a
dependency now.
Since the max_score optimization landed in Elasticsearch 7,
the CommonTermsQuery is redundant and slower. Moreover the
cutoff_frequency parameter for MatchQuery and MultiMatchQuery
is redundant.
Relates to #27096
(cherry picked from commit 04b74497314eeec076753a33b3b6cc11549646e8)
* Don't force the logger in the Netty4Plugin class already, at this point log4j might not be fully initialized.
* The call was redundant anyway since we do the same thing in the Netty4Transport and Netty4HttpServerTransport classes already and there we do it properly after setting up log4j by initilizing the loggers
* Relates #42532
_score was removed from use in aggregations using expressions
unintentionally when script contexts were added. This allows _score to once
again be used.
In the reindex from old tests we require Java 8. Today when configuring
the reindex from old tests, we eagerly evalulate Java 8 home, which
means that we require JAVA8_HOME to be set even if the reindex from old
test tasks are not in the task graph. This is an onerous requirement if,
for example, all that you want to do is build a distribution. This
commit addresses this by making evaluation of Java 8 home lazy, so that
it is only done and required if the reindex from old test tasks would be
executed.
* Remove Delete Method from BlobStore (#41619)
* The delete method on the blob store was used almost nowhere and just duplicates the delete method on the blob containers
* The fact that it provided for some recursive delete logic (that did not behave the same way on all implementations) was not used and not properly tested either
Armin Braun
Jim Ferenczi
Jack Conradson
Tim Brooks
Henning Andersen
Michael Basnight
Jason Tedor
Yannick Welsch
Zachary Tong
Christoph Büscher
Ignacio Vera
Nhat Nguyen
Ryan Ernst
Alpar Torok
Tal Levy
Julie Tibshirani
Alan Woodward
Nick Knize
Jake Landis
Alan Woodward
Stuart Tettemer
Christos Soulios
Martijn van Groningen
Mayya Sharipova
Martijn Laarman
Jay Modi
Ryan Ernst
Benjamin Trent
Mark Vieira
David Turner
Marios Trivyzas
Gürkan Kaymak