When sending a response to a client, we attach a releasing listener to
the channel promise. If the client disappears before the response is
sent, the releasing listener was never notified. The reason the
listeners were never notified was due to a mistaken invocation of write
and flush on the channel which has two overrides: one that takes an
existing promise, and one that does not and instead creates a new
promise. When the client disappears, it is this latter promise that is
notified, which does not contain the releasing listener. This commit
addreses this issue by invoking the override that passes our channel
promise through.
Relates #23310
Previously we calculated Netty' receive predictor size for HTTP and transport
traffic based on available memory and worker nodes. This resulted in a receive
predictor size between 64kb and 512kb. In our benchmarks this leads to increased
GC pressure.
With this commit we set Netty's receive predictor size to 32kb. This value is in
a sweet spot between heap memory waste (-> GC pressure) and effect on request
metrics (achieved throughput and latency numbers).
Closes#23185
This commit enforces the requirement of Content-Type for the REST layer and removes the deprecated methods in transport
requests and their usages.
While doing this, it turns out that there are many places where *Entity classes are used from the apache http client
libraries and many of these usages did not specify the content type. The methods that do not specify a content type
explicitly have been added to forbidden apis to prevent more of these from entering our code base.
Relates #19388
Get HEAD requests incorrectly return a content-length header of 0. This
commit addresses this by removing the special handling for get HEAD
requests, and just relying on the general mechanism that exists for
handling HEAD requests in the REST layer.
Relates #23186
Get source HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for get
source HEAD requests, and just relying on the general mechanism that
exists for handling HEAD requests in the REST layer.
Relates #23151
When Netty decodes a bad HTTP request, it marks the decoder result on
the HTTP request as a failure, and reroutes the request to GET
/bad-request. This either leads to puzzling responses when a bad request
is sent to Elasticsearch (if an index named "bad-request" does not exist
then it produces an index not found exception and otherwise responds
with the index settings for the index named "bad-request"). This commit
addresses this by inspecting the decoder result on the HTTP request and
dispatching the request to a bad request handler preserving the initial
cause of the bad request and providing an error message to the client.
Relates #23153
This commit adds a new method to the TransportChannel that provides access to the version of the
remote node that the response is being sent on and that the request came from. This is helpful
for serialization of data attached as headers.
Template HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for
template HEAD requests, and just relying on the general mechanism that
exists for handling HEAD requests in the REST layer.
Relates #23130
Index HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for index
HEAD requests, and just relying on the general mechanism that exists for
handling HEAD requests in the REST layer.
Relates #23112
Alias HEAD requests incorrectly return a content-length header of
0. This commit addresses this by removing the special handling for alias
HEAD requests, and just relying on the general mechanism that exists for
handling HEAD requests in the REST layer.
Relates #23094
Netty 4.1.8 wraps connect and accept operations in doPrivileged blocks.
This means that we not need to give permissions to the entire transport
module. Additionally this commit deletes the privileged socket channel
and privileged server socket chanel.
#22194 gave us the ability to open low level temporary connections to remote node based on their address. With this use case out of the way, actual full blown connections should validate the node on the other side, making sure we speak to who we think we speak to. This helps in case where multiple nodes are started on the same host and a quick node restart causes them to swap addresses, which in turn can cause confusion down the road.
This is related to #22116. Core no longer needs `SocketPermission`
`connect`.
This permission is relegated to these modules/plugins:
- transport-netty4 module
- reindex module
- repository-url module
- discovery-azure-classic plugin
- discovery-ec2 plugin
- discovery-gce plugin
- repository-azure plugin
- repository-gcs plugin
- repository-hdfs plugin
- repository-s3 plugin
And for tests:
- mocksocket jar
- rest client
- httpcore-nio jar
- httpasyncclient jar
This commit upgrades the checkstyle configuration from version 5.9 to
version 7.5, the latest version as of today. The main enhancement
obtained via this upgrade is better detection of redundant modifiers.
Relates #22960
This change adds a strict mode for xcontent parsing on the rest layer. The strict mode will be off by default for 5.x and in a separate commit will be enabled by default for 6.0. The strict mode, which can be enabled by setting `http.content_type.required: true` in 5.x, will require that all incoming rest requests have a valid and supported content type header before the request is dispatched. In the non-strict mode, the Content-Type header will be inspected and if it is not present or not valid, we will continue with auto detection of content like we have done previously.
The content type header is parsed to the matching XContentType value with the only exception being for plain text requests. This value is then passed on with the content bytes so that we can reduce the number of places where we need to auto-detect the content type.
As part of this, many transport requests and builders were updated to provide methods that
accepted the XContentType along with the bytes and the methods that would rely on auto-detection have been deprecated.
In the non-strict mode, deprecation warnings are issued whenever a request with body doesn't provide the Content-Type header.
See #19388
This commit adds a SpecialPermission constant and uses that constant
opposed to introducing new instances everywhere.
Additionally, this commit introduces a single static method to check that
the current code has permission. This avoids all the duplicated access
blocks that exist currently.
This is related to #22116. Core no longer needs SocketPermission
accept. This permission is relegated to the transport-netty4 module
and (for tests) to the mocksocket jar.
Previously, certain settings that could take multiple comma delimited
values would pick up incorrect values for all entries but the first if
each comma separated value was followed by a whitespace character. For
example, the multi-value "A,B,C" would be correctly parsed as
["A", "B", "C"] but the multi-value "A, B, C" would be incorrectly parsed
as ["A", " B", " C"].
This commit allows a comma separated list to have whitespace characters
after each entry. The specific settings that were affected by this are:
cluster.routing.allocation.awareness.attributes
index.routing.allocation.require.*
index.routing.allocation.include.*
index.routing.allocation.exclude.*
cluster.routing.allocation.require.*
cluster.routing.allocation.include.*
cluster.routing.allocation.exclude.*
http.cors.allow-methods
http.cors.allow-headers
For the allocation filtering related settings, this commit also provides
validation of each specified entry if the filtering is done by _ip,
_host_ip, or _publish_ip, to ensure that each entry is a valid IP
address.
Closes#22297
Today we have quite some abstractions that are essentially providing a simple
dispatch method to the plugins defining a `HttpServerTransport`. This commit
removes `HttpServer` and `HttpServerAdaptor` and introduces a simple `Dispatcher` functional
interface that delegate to `RestController` by default.
Relates to #18482
This is related to #22116. netty channels require socket `connect` and
`accept` privileges. Netty does not currently wrap these operations
with `doPrivileged` blocks. These changes extend the netty channels
and wrap calls to the relevant super methods in doPrivileged blocks.
This integrates the mocksocket jar with elasticsearch tests. Mocksocket wraps actions requiring SocketPermissions in doPrivilege blocks. This will eventually allow SocketPermissions to be assigned to the mocksocket jar opposed to the entire elasticsearch codebase.
We previously named the thread using a frame from the stack trace, but
this was removed to simplify the code here. However, the comment
explaining this was left behind and this commit cleans that up.
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
Introduces `XContentParser#namedObject which works a little like
`StreamInput#readNamedWriteable`: on startup components register
parsers under names and a superclass. At runtime we look up the
parser and call it to parse the object.
Right now the parsers take a context object they use to help with
the parsing but I hope to be able to eliminate the need for this
context as most what it is used for at this point is to move
around parser registries which should be replaced by this method
eventually. I make no effort to do so in this PR because it is
big enough already. This is meant to the a start down a road that
allows us to remove classes like `QueryParseContext`,
`AggregatorParsers`, `IndicesQueriesRegistry`, and
`ParseFieldRegistry`.
The goal here is to reduce the amount of plumbing required to
allow parsing pluggable things. With this you don't have to pass
registries all over the place. Instead you must pass a super
registry to fewer places and use it to wrap the reader. This is
the same tradeoff that we use for NamedWriteable and it allows
much, much simpler binary serialization. We think we want that
same thing for xcontent serialization.
The only parsing actually converted to this method is parsing
`ScoreFunctions` inside of `FunctionScoreQuery`. I chose this
because it is relatively self contained.
In #22094 we introduce a test-only setting to simulate transport
impls that don't support handshakes. This commit implements the same logic
without a setting.
Today we initialize Netty in a static initializer. We trigger this
method via static initializers from Netty-related classes, but we can
trigger this method earlier than we do to ensure that Netty is
initialized how we want it to be.
Low level handshake code doesn't handle situations gracefully if the connection
is concurrently closed or reset by peer. This commit adds the relevant code to
fail the handshake if the connection is closed.
Today we rely on the version that the API user passes in together with the DiscoveryNode. This commit introduces a low level handshake where nodes exchange their version to be used with the transport protocol that is executed every time a connection to a node is established. This, on the one hand allows to change the wire protocol based on the version we are talking to even without a full cluster restart. Today we would need to carry on a BWC layer across major versions but with a handshake we can rely on the fact that the latest version of the previous minor executes a handshake and uses the latest protocol version across all communication with the N+1 version nodes.
This change is yet fully backwards compatible, a followup PR will remove the BWC in 6.0 once this has been back-ported to the 5.x branch
Today we connect and publish the nodes connection before we execute a
handshake with the node we connect to. In the case of connecting to a node
that won't pass the handshake this connection is already `published` and other
code paths can use it. This commit detaches the connection and the publish of the
connection such that `TransportService` can do a handshake before actually connect
and publish the connection.
I added an assertion to Netty4/Netty3Transport in 5.x that is not in
master yet. This commit port the assert to ensure we consumed all connection
in `connectToChannels`
We don't use the test infra nor do we run the tests. They might all be
entirely out of date. We also have a different BWC test infra in-place.
This change removes all of the legacy infra.
Timeouts are global today across all connections this commit allows to specify
a connection timeout per node such that depending on the context connections can
be established with different timeouts.
Relates to #19719
We currently treat every node equally when we establish connections to a node.
Yet, if we are not master eligible or can't hold any data there is no point in creating
a dedicated connection for sending the cluster state or running remote recoveries respectively.
The usage of STATE and RECOVERY connections on non-master and/or non-data nodes will result in an IllegalStateException.
For the record, I also had to remove the geo-hash cell and geo-distance range
queries to make the code compile. These queries already throw an exception in
all cases with 5.x indices, so that does not hurt any more.
I also had to rename all 2.x bwc indices from `index-${version}` to
`unsupported-${version}` to make `OldIndexBackwardCompatibilityIT`
happy.
The Transport#connectToNodeLight concepts is confusing and not very flexible.
neither really testable on a unittest level. This commit cleans up the code used
to connect to nodes and simplifies transport implementations to share more code.
This also allows to connect to nodes with custom profiles if needed, for instance
future improvements can be added to connect to/from nodes that are non-data nodes without
dedicated bulks and recovery connections.
When Netty listens on a socket, it specifies the established connection
backlog for the socket. On Linux, Netty tries to read the system-wide
configuration for this from /proc/sys/net/core/somaxconn and falls back
to a default value when it can not read this value. This commit grants
Netty permission to read this file so that it can honor the system-wide
configuration for the connection backlog for sockets that it is
listening on. This also removes an obnoxious stack trace that appears
when Netty logging is set to debug logging.
Relates #21840
In the past we ran yaml tests against an internal cluster, which would get restarted after each test failure, hence the client objects needed to eventually be refreshed before each test. That is why we had the initClient method to re-initialize the YamlTestClient in the execution context. We ended up though re-initializing the client unconditionally, which is not needed.
Also, ESRestTestCase recreates the RestClient against the external cluster before each test, which is not needed given that nothing changes in the external cluster.
This commit removes the initClient method from the yaml tests execution context. The YamlTestClient can be eagerly created before the first yaml test runs and then re-used in subsequent tests. Also api calls to check for nodes versions etc. are moved out of YamlTestClient to ESClientYamlSuiteTestCase. Also the RestClient is now initialized in ESRestTestCase before the first test runs, and kept around afterwards as a static member.
Basically each subclass of EsRestTestCase will have its own RestClient instance, but the client will be shared across the different tests within the same class. The yaml test suite is just a special suite, composed of 600+ tests that are loaded from files, which will share the same client instance.
This change should speed tests up as well, as we don't recreate the RestClient before each single test, and we don't call _cat/nodes either before each single test.
This commit simplifies the handling of fatal errors on the network
layer. The simplification here is to remove the use of a
StringWriter/PrintWriter pair to format the stack trace, removing the
need for the method to declare that it throws a checked IOException.
When a fatal error is thrown on the network layer, such an error never
makes its way to the uncaught exception handler. This prevents the node
from being torn down if an out of memory error or other fatal error is
thrown while handling HTTP or transport traffic. This commit adds logic
to ensure that such errors bubble their way up to the uncaught exception
handler, even though Netty tries really hard to swallow everything.
Relates #21720
Today we read a vint from the stream to allocate the size of an array up-front
before we start reading the values. This can be dangerous if for instance we read
from a corrupted stream or if some manipulated bytes are send for instance from
an attacker or a fuzzer. In most of the cases we can apply some best effort and
validate the array size to be _sane_ by ensuring we can at read at least N bytes
where N is the expected size of the array.
We kept `netty_3` as a fallback in the 5.x series but now that master
is 6.0 we don't need this or in other words all issues coming up with
netty 4 will be blockers for 6.0.
At one point in the past when moving out the rest tests from core to
their own subproject, we had multiple test classes which evenly split up
the tests to run. However, we simplified this and went back to a single
test runner to have better reproduceability in tests. This change
removes the remnants of that multiplexing support.
Previously Elasticsearch would only use the package name for logging
levels, truncating the package prefix and the class name. This meant
that logger names for Netty were just prefixed by netty3 and netty. We
changed this for Elasticsearch so that it's the fully-qualified class
name now, but never corrected this for Netty. This commit fixes the
logger names for the Netty modules so that their levels are controlled
by the fully-qualified class name.
Relates #21223
This commit fixes responses to HEAD requests so that the value of the
Content-Length is correct per the HTTP spec. Namely, the value of this
header should be equal to the Content-Length if the request were not a
HEAD request.
This commit also fixes a memory leak on HEAD requests to the main action
that arose from the bytes on a builder not being released due to them
being dropped on the floor to ensure that the response to the main
action did not have a body.
Relates #21123
This commit upgrades the transport-netty4 module dependency from Netty
version 4.1.5 to version 4.1.6. This is a bug fix release of Netty.
Relates #21051
This commit fixes an issue with the handling of the value "keep-alive"
on the Connection header in the Netty 4 HTTP implementation while
handling an HTTP 1.0 request. The issue was using the wrong equals
method to compare an AsciiString instance and a String instance (they
could never be equal). This commit fixes this to use the correct equals
method to compare for content equality.
This commit fixes an issue with the handling of the value "close" on the
Connection header in the Netty 4 HTTP implementation. The issue was
using the wrong equals method to compare an AsciiString instance and a
String instance (they could never be equal). This commit fixes this to
use the correct equals method to compare for content equality.
Relates #20956
Today Elasticsearch limits the number of processors used in computing
thread counts to 32. This was from a time when Elasticsearch created
more threads than it does now and users would run into out of memory
errors. It appears the real cause of these out of memory errors was not
well understood (it's often due to ulimit settings) and so users were
left hitting these out of memory errors on boxes with high core
counts. Today Elasticsearch creates less threads (but still a lot) and
we have a bootstrap check in place to ensure that the relevant ulimit is
not too low.
There are some caveats still to having too many concurrent indexing
threads as it can lead to too many little segments, and it's not a
magical go faster knob if indexing is already bottlenecked by disk, but
this limitation is artificial and surprising to users and so it should
be removed.
This commit also increases the lower bound of the max processes ulimit,
to prepare for a world where Elasticsearch instances might be running
with more the previous cap of 32 processors. With the current settings,
Elasticsearch wants to create roughly 576 + 25 * p / 2 threads, where p
is the number of processors. Add in roughly 7 * p / 8 threads for the GC
threads and a fudge factor, and 4096 should cover us pretty well up to
256 cores.
Relates #20874
Both netty3 and netty4 http implementation printed the default
toString representation of PortRange if ports couldn't be bound.
This commit adds a better default toString method to PortRange and
uses the string representation for the error message in the http
implementations.
Today we throw an assertion error if we release an AbstractArray more than once.
Yet, it's recommended to implement close methods such that they can be invoked
more than once. Guaranteed single release calls are hard to implement and some
situations might not be tested causing for instance `CircuitBreaker` to operate on
corrupted memory stats.
UpdateHelper, MetaDataIndexUpgradeService, and some recovery
stuff.
Move ClusterSettings to nullable ctor parameter of TransportService
so it isn't forgotten.
This change proposes the removal of all non-tcp transport implementations. The
mock transport can be used by default to run tests instead of local transport that has
roughly the same performance compared to TCP or at least not noticeably slower.
This is a master only change, deprecation notice in 5.x will be committed as a
separate change.
This commit removes `ByteSizeValue`'s methods that are duplicated (ex: `mbFrac()` and `getMbFrac()`) in order to only keep the `getN` form.
It also renames `mb()` -> `getMb()`, `kb()` -> `getKB()` in order to be more coherent with the `ByteSizeUnit` method names.
This change removes all guice interaction from Transport, HttpServerTransport,
HttpServer and TransportService. All these classes as well as their subclasses
or extended version configured via plugins are now created by using plain old
bloody java constructors. YAY!
TransportService is such a central part of the core server, replacing
it's implementation is risky and can cause serious issues. This change removes the ability to
plug in TransportService but allows registering a TransportInterceptor that enables
plugins to intercept requests on both the sender and the receiver ends. This is a commonly used
and overwritten functionality but encapsulates the custom code in a contained manner.
This commit modifies the call sites that allocate a parameterized
message to use a supplier so that allocations are avoided unless the log
level is fine enough to emit the corresponding log message.
This commit upgrades the Netty dependencies from version 4.1.4 to
version 4.1.5. This upgrade brings several bug fixes including the
removal of a obnoxious and scary-looking log message when unsafe is
explicitly disabled.
Relates #20222
Netty3/4 TcpTransport implementations are creating thread factories with a "http_server" thread prefix whereas it should start with "transport_server" and let the "http_server" prefix for the HttpServerTransport implementations.
The network types in use on a cluster can be useful information to have,
so this commit adds aggregate metrics for the network types in use in a
cluster to the cluster stats.
Relates #20144
The Netty 4 HTTP server pipeline tests contains two different test
cases. The general idea behind these tests is to submit some requests to
a Netty 4 HTTP server, one test with pipelining enabled and another test
with pipelining disabled. These requests are submitted to two endpoints,
one with a path like /{id} and another with a path like /slow with a
query string parameter sleep. This parameter tells the request handler
how long to sleep for before replying. The idea is that in the case of
the pipelining enabled tests, the requests should come back exactly in
the order submitted, even with some of the requests hitting the slow
endpoint with random sleep durations; this is the guarantee that
pipelining provides. And in the case of the pipelining disabled tests,
requests were randombly submitted to /{id} and /slow with sleep
parameters starting at 600ms and increasing by 100ms for each slow
request constructed. We would expect the requests to come back with the
all the responses to the /{id} requests first because these requests
will execute instantaneously, and then the responses to the /slow
requests. Further, it was expected that the slow requests would come
back ordered by the length of the sleep, the thinking being that 100ms
should be enough of a difference between each request that we would
avoid any race conditions. Sadly, this is not the case, the threads do
sometimes hit race conditions.
This commit modifies the HTTP server pipelining tests to address this
race condition. The modification is that the query string parameter on
the /slow endpoint is removed in favor of just submitting requests to
the path /slow/{id}, where id just used a marker to distinguish each
request. The server chooses a random sleep of at least 500ms for each
request on the slow path. The assertion here then is that the /{id}
responses arrive first, then then /slow responses. We can not make an
assertion on the order of the responses, but we can assert that we did
see every expected response.
Relates #19845
Due to a misordering of the HTTP handlers, the Netty 4 HTTP server
mishandles Expect: 100-continue headers from clients. This commit fixes
this issue by ordering the handlers correctly.
Relates #19904
Today when we load the Netty plugins, we indirectly cause several Netty
classes to initialize. This is because we attempt to load some classes
by name, and loading these classes is done in a way that triggers a long
chain of class initializers within Netty. We should not do this, this
can lead to log messages before the logger is loader, and it leads to
initialization in cases when the classes would never be needed (for
example, Netty 3 class initialization is never needed if Netty 4 is
used, and vice versa). This commit avoids this early initialization of
these classes by removing the need for the early loading.
Relates #19819
* master:
Fix REST test documentation
[Test] move methods from bwc test to test package for use in plugins (#19738)
package-info.java should be in src/main only.
Split regular histograms from date histograms. #19551
Tighten up concurrent store metadata listing and engine writes (#19684)
Plugins: Make NamedWriteableRegistry immutable and add extenion point for named writeables
Add documentation for the 'elasticsearch-translog' tool
[TEST] Increase time waiting for all shards to move off/on to a node
Fixes the active shard count check in the case of (#19760)
Fixes cat tasks operation in detailed mode
ignore some docker craziness in scccomp environment checks
Currently any code that wants to added NamedWriteables to the
NamedWriteableRegistry can do so via guice injection of the registry,
and registering at construction time. However, this makes the registry
complex: it has both get and register methods synchronized, and there is
likely contention on the read side from multiple threads. The
registration has mostly already been contained to guice modules at node
construction time.
This change makes the registry immutable, taking all of the
NamedWriteable readers at construction time. It also allows plugins to
added arbitrary named writables that it may use in its own transport
actions.
In an effort to reduce the number of tiny packages we have in the
code base this moves all the files that were in subdirectories of
`org.elasticsearch.rest.action.admin.cluster` into
`org.elasticsearch.rest.action.admin.cluster`.
Also fixes line length in these packages.
This makes it obvious that these tests are for running the client yaml
suites. Now that there are other ways of running tests using the REST
client against a running cluster we can't go on calling the shared
client yaml tests "REST tests". They are rest tests, but they aren't
**the** rest tests.
Recently, we experience timeouts on our Windows build slaves for
Netty4RestIT. Until we have figured out what's going on, we
increase this test suite's timeout temporarily to ensure this
timeout does not mask other problems.
This adds a header that looks like `Location: /test/test/1` to the
response for the index/create/update API. The requirement for the header
comes from https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.htmlhttps://tools.ietf.org/html/rfc7231#section-7.1.2 claims that relative
URIs are OK. So we use an absolute path which should resolve to the
appropriate location.
Closes#19079
This makes large changes to our rest test infrastructure, allowing us
to write junit tests that test a running cluster via the rest client.
It does this by splitting ESRestTestCase into two classes:
* ESRestTestCase is the superclass of all tests that use the rest client
to interact with a running cluster.
* ESClientYamlSuiteTestCase is the superclass of all tests that use the
rest client to run the yaml tests. These tests are shared across all
official clients, thus the `ClientYamlSuite` part of the name.
Jason Tedor
Daniel Mitterdorfer
Jay Modi
Ryan Ernst
Tim Brooks
Boaz Leskes
Christoph Büscher
Ali Beyad
Simon Willnauer
Nik Everett
Simon Willnauer
Adrien Grand
Luca Cavanna
Tanguy Leroux
jaymode
Alexander Reelsen
David Pilato
Daniel Mitterdorfer