This request:
```
POST /_search
{
"aggs": {
"a": {
"adjacency_matrix": {
"filters": {
"1": {
"terms": { "t": { "index": "lookup", "id": "1", "path": "t" } }
}
}
}
}
}
}
```
Would fail with a 500 error and a message like:
```
{
"error": {
"root_cause": [
{
"type": "illegal_state_exception",
"reason":"async actions are left after rewrite"
}
]
}
}
```
This fixes that by moving the query rewrite phase from a synchronous
call on the data nodes into the standard aggregation rewrite phase which
can properly handle the asynchronous actions.
Adds an explicit check to `variable_width_histogram` to stop it from
trying to collect from many buckets because it can't. I tried to make it
do so but that is more than an afternoon's project, sadly. So for now we
just disallow it.
Relates to #42035
We're tracking this aggregation's experimental-progress in #58573. We'd
like a little time to be able to make backwards incompatible changes to
the aggregation because we're not 100% sure about the request and
response format yet.
Implements a new histogram aggregation called `variable_width_histogram` which
dynamically determines bucket intervals based on document groupings. These
groups are determined by running a one-pass clustering algorithm on each shard
and then reducing each shard's clusters using an agglomerative
clustering algorithm.
This PR addresses #9572.
The shard-level clustering is done in one pass to minimize memory overhead. The
algorithm was lightly inspired by
[this paper](https://ieeexplore.ieee.org/abstract/document/1198387). It fetches
a small number of documents to sample the data and determine initial clusters.
Subsequent documents are then placed into one of these clusters, or a new one
if they are an outlier. This algorithm is described in more details in the
aggregation's docs.
At reduce time, a
[hierarchical agglomerative clustering](https://en.wikipedia.org/wiki/Hierarchical_clustering)
algorithm inspired by [this paper](https://arxiv.org/abs/1802.00304)
continually merges the closest buckets from all shards (based on their
centroids) until the target number of buckets is reached.
The final values produced by this aggregation are approximate. Each bucket's
min value is used as its key in the histogram. Furthermore, buckets are merged
based on their centroids and not their bounds. So it is possible that adjacent
buckets will overlap after reduction. Because each bucket's key is its min,
this overlap is not shown in the final histogram. However, when such overlap
occurs, we set the key of the bucket with the larger centroid to the midpoint
between its minimum and the smaller bucket’s maximum:
`min[large] = (min[large] + max[small]) / 2`. This heuristic is expected to
increases the accuracy of the clustering.
Nodes are unable to share centroids during the shard-level clustering phase. In
the future, resolving https://github.com/elastic/elasticsearch/issues/50863
would let us solve this issue.
It doesn’t make sense for this aggregation to support the `min_doc_count`
parameter, since clusters are determined dynamically. The `order` parameter is
not supported here to keep this large PR from becoming too complex.
Co-authored-by: James Dorfman <jamesdorfman@users.noreply.github.com>
* Make it more clear that you can use `month` or `1M`.
* Explain rounding rules
* Consistently use "time zone" instead of "timezone". It looks like both
are right but I see "time zone" much more. And the parameter in
elasticsearch is `time_zone` so we may as well line up.
Closes#56760
Co-authored-by: James Rodewig <james.rodewig@elastic.co>
Removes an example from the "Document counts are approximate" section of the
terms agg documentation.
As #52377 details, the example was no longer accurate in 7.x or 6.8. Document
counts were more precise than the example presented.
We've opened issue #56025 to discuss re-adding an example later.
Co-authored-by: James Rodewig <james.rodewig@elastic.co>
Co-authored-by: AB Prashanth <panuradh@buffalo.edu>
This adds a validation to VSParserHelper to ensure that a field or
script or both are specified by the user. This is technically
required today already, but throws an exception much deeper
in the agg framework and has a very unintuitive error for the user
(as well as eating more resources instead of failing early)
* Adds support for geo-bounds filtering in geogrid aggregations (#50002)
It is fairly common to filter the geo point candidates in
geohash_grid and geotile_grid aggregations according to some
viewable bounding box. This change introduces the option of
specifying this filter directly in the tiling aggregation.
This is even more relevant to `geo_shape` where the bounds will restrict
the shape to be within the bounds
this optional `bounds` parameter is parsed in an equivalent fashion to
the bounds specified in the geo_bounding_box query.
Adds support for the `offset` parameter to the `date_histogram` source
of composite aggs. The `offset` parameter is supported by the normal
`date_histogram` aggregation and is useful for folks that need to
measure things from, say, 6am one day to 6am the next day.
This is implemented by creating a new `Rounding` that knows how to
handle offsets and delegates to other rounding implementations. That
implementation doesn't fully implement the `Rounding` contract, namely
`nextRoundingValue`. That method isn't used by composite aggs so I can't
be sure that any implementation that I add will be correct. I propose to
leave it throwing `UnsupportedOperationException` until I need it.
Closes#48757
* Docs: Refine note about `after_key`
I was curious about composite aggregations, specifically I wanted to
know how to write a composite aggregation that had all of its buckets
filtered out so you *had* to use the `after_key`. Then I saw that we've
declared composite aggregations not to work with pipelines in #44180. So
I'm not sure you *can* do that any more. Which makes the note about
`after_key` inaccurate. This rejiggers that section of the docs a little
so it is more obvious that you send the `after_key` back to us. And so
it is more obvious that you should *only* use the `after_key` that we
give you rather than try to work it out for yourself.
* Apply suggestions from code review
Co-Authored-By: James Rodewig <james.rodewig@elastic.co>
Co-authored-by: James Rodewig <james.rodewig@elastic.co>
Co-authored-by: Daniel Huang <danielhuang@tencent.com>
This is a spinoff of #48130 that generalizes the proposal to allow early termination with the composite aggregation when leading sources match a prefix or the entire index sort specification.
In such case the composite aggregation can use the index sort natural order to early terminate the collection when it reaches a composite key that is greater than the bottom of the queue.
The optimization is also applicable when a query other than match_all is provided. However the optimization is deactivated for sources that match the index sort in the following cases:
* Multi-valued source, in such case early termination is not possible.
* missing_bucket is set to true
* Minor improvement to the nested aggregation docs
* The attributes name and resellers.name were rather confusing,
especially since the first one was dynamically mapped and not shown
in the documentation (you had to read the test to see it). This
change introduces a unique name for the nested attribute and adds
the example document to the documentation.
* Change the index name from "index" to something more speaking.
* Update docs/reference/aggregations/bucket/nested-aggregation.asciidoc
Co-Authored-By: James Rodewig <james.rodewig@elastic.co>
* Update docs/reference/aggregations/bucket/nested-aggregation.asciidoc
Co-Authored-By: James Rodewig <james.rodewig@elastic.co>
* Update docs/reference/aggregations/bucket/nested-aggregation.asciidoc
Co-Authored-By: James Rodewig <james.rodewig@elastic.co>
Following performance optimisations to the adjacency_matrix aggregation we no longer require this setting. Marked as deprecated and due for removal in 8.0
Related #46324
This adds a `rare_terms` aggregation. It is an aggregation designed
to identify the long-tail of keywords, e.g. terms that are "rare" or
have low doc counts.
This aggregation is designed to be more memory efficient than the
alternative, which is setting a terms aggregation to size: LONG_MAX
(or worse, ordering a terms agg by count ascending, which has
unbounded error).
This aggregation works by maintaining a map of terms that have
been seen. A counter associated with each value is incremented
when we see the term again. If the counter surpasses a predefined
threshold, the term is removed from the map and inserted into a cuckoo
filter. If a future term is found in the cuckoo filter we assume it
was previously removed from the map and is "common".
The map keys are the "rare" terms after collection is done.
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
Adds some validation to prevent duplicate source names from being
used in the composite agg.
Also refactored to use a ConstructingObjectParser and removed the
private ctor and setter for sources, making it mandatory.
This section should be at the same sub-level as other sections in the
auto date-histogram docs, otherwise it is rendered on to another page
and is confusing for users to understand what it's in reference to.
This helps avoid memory issues when computing deep sub-aggregations. Because it
should be rare to use sub-aggregations with significant terms, we opted to always
choose breadth first as opposed to exposing a `collect_mode` option.
Closes#28652.
Implements `geotile_grid` aggregation
This patch refactors previous implementation https://github.com/elastic/elasticsearch/pull/30240
This code uses the same base classes as `geohash_grid` agg, but uses a different hashing
algorithm to allow zoom consistency. Each grid bucket is aligned to Web Mercator tiles.
This changes adds the support to handle `nested` fields in the `composite`
aggregation. A `nested` aggregation can be used as parent of a `composite`
aggregation in order to target `nested` fields in the `sources`.
Closes#28611
Nik Everett
Tal Levy
Benjamin Trent
Gabriel Petrovay
James Rodewig
Zachary Tong
Anton Dollmaier
Jim Ferenczi
Lisa Cawley
Mark Tozzi
Javier Ruiz
markharwood
LHearen
Flavio Pompermaier
Sandeep Kanabar
Zachary Tong
Paul Sanwald
Jason Tedor
Antonio Matarrese
Ian
Samuel Cifuentes García
Hannes Van De Vreken
Alexander Reelsen
Yuri Astrakhan
Christoph Büscher