- Replace immediate task creations by using task avoidance api
- One step closer to #56610
- Still many tasks are created during configuration phase. Tackled in separate steps
* Remove usage of deprecated testCompile configuration
* Replace testCompile usage by testImplementation
* Make testImplementation non transitive by default (as we did for testCompile)
* Update CONTRIBUTING about using testImplementation for test dependencies
* Fail on testCompile configuration usage
This is a follow up to a previous commit that renamed MetaData to
Metadata in all of the places. In that commit in master, we renamed
META_DATA to METADATA, but lost this on the backport. This commit
addresses that.
This is a simple naming change PR, to fix the fact that "metadata" is a
single English word, and for too long we have not followed general
naming conventions for it. We are also not consistent about it, for
example, METADATA instead of META_DATA if we were trying to be
consistent with MetaData (although METADATA is correct when considered
in the context of "metadata"). This was a simple find and replace across
the code base, only taking a few minutes to fix this naming issue
forever.
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
Due to a regression bug the metadata Active Directory realm
setting is ignored (it works correctly for the LDAP realm type).
This commit redresses it.
Closes#45848
This PR adds some restrictions around testfixtures to make sure the same service ( as defiend in docker-compose.yml ) is not shared between multiple projects.
Sharing would break running with --parallel.
Projects can still share fixtures as long as each has it;s own service within.
This is still useful to share some of the setup and configuration code of the fixture.
Project now also have to specify a service name when calling useCluster to refer to a specific service.
If this is not the case all services will be claimed and the fixture can't be shared.
For this reason fixtures have to explicitly specify if they are using themselves ( fixture and tests in the same project ).
This commit removes some very old test logging annotations that appeared
to be added to investigate test failures that are long since closed. If
these are needed, they can be added back on a case-by-case basis with a
comment associating them to a test failure.
In hamcrest 2.1 warnings for unchecked varargs were fixed by hamcrest using @SafeVarargs for those matchers where this warning occurred.
This PR is aimed to remove these annotations when Matchers.contains ,Matchers.containsInAnyOrder or Matchers.hasItems was used
backport #41528
This change removes the use of hardcoded port values for the
idp-fixture in favor of the mapped ephemeral ports. This should prevent
failures due to port conflicts in CI.
The change replaces the Vagrant box based fixture with a fixture
based on docker compose and 2 docker images, one for an openldap
server and one for a Shibboleth SAML Identity Provider.
The configuration of both openldap and shibboleth is identical to
the previous one, in order to minimize required changes in the
tests
* Testing conventions now checks for tests in main
This is the last outstanding feature of the old NamingConventionsTask,
so time to remove it.
* PR review
This change fixes the setup of the SSL configuration for the test
openldap realm. The configuration was missing the realm identifier so
the SSL settings being used were just the default JDK ones that do not
trust the certificate of the idp fixture.
See #37591
This commit removes the fallback for SSL settings. While this may be
seen as a non user friendly change, the intention behind this change
is to simplify the reasoning needed to understand what is actually
being used for a given SSL configuration. Each configuration now needs
to be explicitly specified as there is no global configuration or
fallback to some other configuration.
Closes#29797
Closes#35435
- make it easier to add additional testing tasks with the proper configuration and add some where they were missing.
- mute or fix failing tests
- add a check as part of testing conventions to find classes not included in any testing task.
This moves all Realm settings to an Affix definition.
However, because different realm types define different settings
(potentially conflicting settings) this requires that the realm type
become part of the setting key.
Thus, we now need to define realm settings as:
xpack.security.authc.realms:
file.file1:
order: 0
native.native1:
order: 1
- This is a breaking change to realm config
- This is also a breaking change to custom security realms (SecurityExtension)
This reworks how we configure the `shadow` plugin in the build. The major
change is that we no longer bundle dependencies in the `compile` configuration,
instead we bundle dependencies in the new `bundle` configuration. This feels
more right because it is a little more "opt in" rather than "opt out" and the
name of the `bundle` configuration is a little more obvious.
As an neat side effect of this, the `runtimeElements` configuration used when
one project depends on another now contains exactly the dependencies needed
to run the project so you no longer need to reference projects that use the
shadow plugin like this:
```
testCompile project(path: ':client:rest-high-level', configuration: 'shadow')
```
You can instead use the much more normal:
```
testCompile "org.elasticsearch.client:elasticsearch-rest-high-level-client:${version}"
```
This bundles the x-pack:protocol project into the x-pack:plugin:core
project because we'd like folks to consider it an implementation detail
of our build rather than a separate artifact to be managed and depended
on. It is now bundled into both x-pack:plugin:core and
client:rest-high-level. To make this work I had to fix a few things.
Firstly, I had to make PluginBuildPlugin work with the shadow plugin.
In that case we have to bundle only the `shadow` dependencies and the
shadow jar.
Secondly, every reference to x-pack:plugin:core has to use the `shadow`
configuration. Without that the reference is missing all of the
un-shadowed dependencies. I tried to make it so that applying the shadow
plugin automatically redefines the `default` configuration to mirror the
`shadow` configuration which would allow us to use bare project references
to the x-pack:plugin:core project but I couldn't make it work. It'd *look*
like it works but then fail for transitive dependencies anyway. I think
it is still a good thing to do but I don't have the willpower to do it
now.
Finally, I had to fix an issue where Eclipse and IntelliJ didn't properly
reference shadowed transitive dependencies. Neither IDE supports shadowing
natively so they have to reference the shadowed projects. We fix this by
detecting `shadow` dependencies when in "Intellij mode" or "Eclipse mode"
and adding `runtime` dependencies to the same target. This convinces
IntelliJ and Eclipse to play nice.
Ensure our tests can run in a FIPS JVM
JKS keystores cannot be used in a FIPS JVM as attempting to use one
in order to init a KeyManagerFactory or a TrustManagerFactory is not
allowed.( JKS keystore algorithms for private key encryption are not
FIPS 140 approved)
This commit replaces JKS keystores in our tests with the
corresponding PEM encoded key and certificates both for key and trust
configurations.
Whenever it's not possible to refactor the test, i.e. when we are
testing that we can load a JKS keystore, etc. we attempt to
mute the test when we are running in FIPS 140 JVM. Testing for the
JVM is naive and is based on the name of the security provider as
we would control the testing infrastrtucture and so this would be
reliable enough.
Other cases of tests being muted are the ones that involve custom
TrustStoreManagers or KeyStoreManagers, null TLS Ciphers and the
SAMLAuthneticator class as we cannot sign XML documents in the
way we were doing. SAMLAuthenticator tests in a FIPS JVM can be
reenabled with precomputed and signed SAML messages at a later stage.
IT will be covered in a subsequent PR
Historically we have loaded SSL objects (such as SSLContext,
SSLIOSessionStrategy) by passing in the SSL settings, constructing a
new SSL configuration from those settings and then looking for a
cached object that matches those settings.
The primary issue with this approach is that it requires a fully
configured Settings object to be available any time the SSL context
needs to be loaded. If the Settings include SecureSettings (such as
passwords for keys or keystores) then this is not true, and the cached
SSL object cannot be loaded at runtime.
This commit introduces an alternative approach of naming every cached
ssl configuration, so that it is possible to load the SSL context for
a named configuration (such as "xpack.http.ssl"). This means that the
calling code does not need to have ongoing access to the secure
settings that were used to load the configuration.
This change also allows monitoring exporters to use SSL passwords
from secure settings, however an exporter that uses a secure SSL setting
(e.g. truststore.secure_password) may not have its SSL settings updated
dynamically (this is prevented by a settings validator).
Exporters without secure settings can continue to be defined and updated
dynamically.
This commit moves the generated-resources directory to be within
the build directory for the openldap-tests and saml-idp-tests
projects. Both projects create a generated-resources directory that
should have been in the build directory but were instead at the same
level as the build directory.
We had a number of awaitsFix links that weren't updated after the xpack
merge.
Where possible I changed the links to the new locations, but in some
circumstances the original ticket was closed (suggesting the awaitsfix
should be removed) or was otherwise unclear the status.
Rene Groeschke
Jason Tedor
Rory Hunter
Albert Zaharovits
Alpar Torok
James Rodewig
Mark Vieira
Przemyslaw Gomulka
Jay Modi
Ioannis Kakavas
jaymode
Tim Vernum
Armin Braun
Nik Everett
Tim Vernum
Zachary Tong
Ryan Ernst