This template was added for 7.0 for what I am guessing is a BWC issue related to deprecation
warnings. It unfortunately seems to cause failures because templates for these tests are not cleared
after the test (because these are upgrade tests).
Resolves#56363
* Remove usage of deprecated testCompile configuration
* Replace testCompile usage by testImplementation
* Make testImplementation non transitive by default (as we did for testCompile)
* Update CONTRIBUTING about using testImplementation for test dependencies
* Fail on testCompile configuration usage
We were previously configuring BWC testing tasks by matching on task
name prefix. This naive approach breaks down when you have versions like
1.0.1 and 1.0.10 since they both share a common prefix. This commit
makes the pattern matching more specific so we won't inadvertently
spin up the wrong cluster version.
Almost every outbound message is serialized to buffers of 16k pagesize.
We were serializing these messages off the IO loop (and retaining the concrete message
instance as well) and would then enqueue it on the IO loop to be dealt with as soon as the
channel is ready.
1. This would cause buffers to be held onto for longer than necessary, causing less reuse on average.
2. If a channel was slow for some reason, not only would concrete message instances queue up for it, but also 16k of buffers would be reserved for each message until it would be written+flushed physically.
With this change, the serialization happens on the event loop which effectively limits the number of buffers that `N` IO-threads will ever use so long as messages are small and channels writable.
Also, this change dereferences the reference to the concrete outbound message as soon as it has been serialized to save some more on GC.
This reduces the GC time for a default PMC run by about 50% in experiments (3 nodes, 2G heap each, loopback ... obvious caveat is that GC isn't that heavy in the first place with recent changes but still a measurable gain).
I also expect it to be helpful for master node stability by causing less of a spike if master is e.g. hit by a large number of requests that are processed batched (e.g. shard snapshot status updates) and responded to in a short time frame all at once.
Obviously, the downside to this change is that it introduces more latency on the IO loop for the serialization. But since we read all of these messages on the IO loop as well I don't see it as much of a qualitative change really and the more predictable buffer use seems much more valuable relatively.
In KeystoreWrapper class we determine if the error to decrypt a
given keystore is caused by a wrong password based on the exception
that the SunJCE implementation of AES is throwing
(AEADBadTagException). Other implementations from other Security
Providers might cause decryption to fail in a different way and cause
us to throw a generic error message.
We handle this in this test by matching both possible
exception messages.
Relates: #56889
This change adds validation when running the users tool so that
if Elasticsearch is expected to run in a JVM that is configured to
be in FIPS 140 mode and the password hashing algorithm is not
compliant, we would throw an error.
Users tool uses the configuration from the node and this validation
would also happen upon node startup but users might be added in the
file realm before the node is started and we would have the
opportunity to notify the user of this misconfiguration.
The changes in #55544 make this much less probable to happen in 8
since the default algorithm will be compliant but this change can
act as a fallback in anycase and makes for a better user experience.
This commit adds a new GeoShapeBoundsAggregator to the spatial plugin and registers it with the GeoShapeValuesSourceType. This enables geo_bounds aggregations on geo_shape fields
We believe there's no longer a need to be able to disable basic-license
features completely using the "xpack.*.enabled" settings. If users don't
want to use those features, they simply don't need to use them. Having
such features always available lets us build more complex features that
assume basic-license features are present.
This commit deprecates settings of the form "xpack.*.enabled" for
basic-license features, excluding "security", which is a special case.
It also removes deprecated settings from integration tests and unit
tests where they're not directly relevant; e.g. monitoring and ILM are
no longer disabled in many integration tests.
I've noticed that a lot of our tests are using deprecated static methods
from the Hamcrest matchers. While this is not a big deal in any
objective sense, it seems like a small good thing to reduce compilation
warnings and be ready for a new release of the matcher library if we
need to upgrade. I've also switched a few other methods in tests that
have drop-in replacements.
This is a first cut at giving NodeInfo the ability to carry a flexible
list of heterogeneous info responses. The trick is to be able to
serialize and deserialize an arbitrary list of blocks of information. It
is convenient to be able to deserialize into usable Java objects so that
we can aggregate nodes stats for the cluster stats endpoint.
In order to provide a little bit of clarity about which objects can and
can't be used as info blocks, I've introduced a new interface called
"ReportingService."
I have removed the hard-coded getters (e.g., getOs()) in favor of a
flexible method that can return heterogeneous kinds of info blocks
(e.g., getInfo(OsInfo.class)). Taking a class as an argument removes the
need to cast in the client code.
This change converts the module and plugin parameters
for testClusters to be lazy. Meaning that the values
are not resolved until they are actually used. This
removes the requirement to use project.afterEvaluate to
be able to resolve the bundle artifact.
Note - this does not completely remove the need for afterEvaluate
since it is still needed for the custom resource extension.
The secure_settings_password was never taken into consideration in
the ReloadSecureSettings API. This commit fixes that and adds
necessary REST layer testing. Doing so, it also:
- Allows TestClusters to have a password protected keystore
so that it can be set for tests.
- Adds a parameter to the run task so that elastisearch can
be run with a password protected keystore from source.
This commit includes a number of changes to reduce overall build
configuration time. These optimizations include:
- Removing the usage of the 'nebula.info-scm' plugin. This plugin
leverages jgit to load read various pieces of VCS information. This
is mostly overkill and we have our own minimal implementation for
determining the current commit id.
- Removing unnecessary build dependencies such as perforce and jgit
now that we don't need them. This reduces our classpath considerably.
- Expanding the usage lazy task creation, particularly in our
distribution projects. The archives and packages projects create
lots of tasks with very complex configuration. Avoiding the creation
of these tasks at configuration time gives us a nice boost.
Guava was removed from Elasticsearch many years ago, but remnants of it
remain due to transitive dependencies. When a dependency pulls guava
into the compile classpath, devs can inadvertently begin using methods
from guava without realizing it. This commit moves guava to a runtime
dependency in the modules that it is needed.
Note that one special case is the html sanitizer in watcher. The third
party dep uses guava in the PolicyFactory class signature. However, only
calling a method on the PolicyFactory actually causes the class to be
loaded, a reference alone does not trigger compilation to look at the
class implementation. There we utilize a MethodHandle for invoking the
relevant method at runtime, where guava will continue to exist.
Backport of #54576.
This commit is part of issue #40366 to remove disabled Xlint warnings
from gradle files. Remove the Xlint exclusions from the following files:
- x-pack/plugin/rollup/build.gradle
- x-pack/plugin/monitoring/build.gradle
- x-pack/qa/rolling-upgrade-basic/build.gradle
Add type parameters to parameterized types. Add wildcard-type parameters
or bounded wildcard-type parameters. Suppress `unchecked` and `rawtypes`
warnings at method level.
* Refactor nodes stats request builders to match requests (#54363)
* Remove hard-coded setters from NodesInfoRequestBuilder
* Remove hard-coded setters from NodesStatsRequest
* Use static imports to reduce clutter
* Remove uses of old info APIs
This is a follow up to a previous commit that renamed MetaData to
Metadata in all of the places. In that commit in master, we renamed
META_DATA to METADATA, but lost this on the backport. This commit
addresses that.
This is a simple naming change PR, to fix the fact that "metadata" is a
single English word, and for too long we have not followed general
naming conventions for it. We are also not consistent about it, for
example, METADATA instead of META_DATA if we were trying to be
consistent with MetaData (although METADATA is correct when considered
in the context of "metadata"). This was a simple find and replace across
the code base, only taking a few minutes to fix this naming issue
forever.
Fixing the naming of the HLRC values to match the ToXContent field names (i.e. the field names returned from an API call).
Also fixes the names in the _cat API as well.
closes#53946
This commit adjusts testWatcherRestart to vary the template version number it
checks for based on the ES version being upgraded from, because the v11 template
is only installed on clusters with all nodes >=7.7.0.
Today the `XPackRestTestHelper` makes some REST calls without the `error_trace`
parameter, so that if they fail due to an exception we do not see very much
detail. This commit adds the `error_trace` parameter to help identify why these
REST calls fail.
This commit ensures that the hidden index settings are only applied to the
Transform index templates when the cluster can support those settings.
Also unmutes the tests which were failing due to the previous behavior.
add 2 additional stats: processing time and processing total which capture the
time spent for processing results and how often it ran. The 2 new stats
correspond to the existing indexing and search stats. Together with indexing
and search this now allows the user to see the full picture, all 3 stages.
This commit removes the configuration time vs execution time distinction
with regards to certain BuildParms properties. Because of the cost of
determining Java versions for configuration JDK locations we deferred
this until execution time. This had two main downsides. First, we had
to implement all this build logic in tasks, which required a bunch of
additional plumbing and complexity. Second, because some information
wasn't known during configuration time, we had to nest any build logic
that depended on this in awkward callbacks.
We now defer to the JavaInstallationRegistry recently added in Gradle.
This utility uses a much more efficient method for probing Java
installations vs our jrunscript implementation. This, combined with some
optimizations to avoid probing the current JVM as well as deferring
some evaluation via Providers when probing installations for BWC builds
we can maintain effectively the same configuration time performance
while removing a bunch of complexity and runtime cost (snapshotting
inputs for the GenerateGlobalBuildInfoTask was very expensive). The end
result should be a much more responsive build execution in almost all
scenarios.
(cherry picked from commit ecdbd37f2e0f0447ed574b306adb64c19adc3ce1)
* Fix feature flag setting for ComponentTemplate APIs (#53758)
The feature flag was set for *most* of the builds, but there are a couple where it was missing.
Resolves#53708
* Add skip for older versions of ES
This commit updates the template used for watch history indices with
the hidden index setting so that new indices will be created as hidden.
Relates #50251
Backport of #52962
Datafeed bwc tests have been muted for some time in the 7.x. This is because of date_histogram interval deprecation warnings.
This commit fixes the tests as must as possible while still handling deprecation warnings.
When we test backwards compatibility we often end up in a situation
where we *sometimes* get a warning, and sometimes don't. Like, we won't
get the warning if we're testing against an older version, but we will
in a newer one. Or we won't get the warning if the request randomly
lands on a node with an old version of the code. But we wouldn't if it
randomed into a node with newer code.
This adds `allowed_warnings` to our yaml test runner for those cases:
warnings declared this way are "allowed" but not "required".
Blocks #52959
Co-authored-by: Benjamin Trent <ben.w.trent@gmail.com>
This adds a new configurable field called `indices_options`. This allows users to create or update the indices_options used when a datafeed reads from an index.
This is necessary for the following use cases:
- Reading from frozen indices
- Allowing certain indices in multiple index patterns to not exist yet
These index options are available on datafeed creation and update. Users may specify them as URL parameters or within the configuration object.
closes https://github.com/elastic/elasticsearch/issues/48056
This PR moves the majority of the Watcher REST tests under
the Watcher x-pack plugin.
Specifically, moves the Watcher tests from:
x-pack/plugin/test
x-pack/qa/smoke-test-watcher
x-pack/qa/smoke-test-watcher-with-security
x-pack/qa/smoke-test-monitoring-with-watcher
to:
x-pack/plugin/watcher/qa/rest (/test and /qa/smoke-test-watcher)
x-pack/plugin/watcher/qa/with-security
x-pack/plugin/watcher/qa/with-monitoring
Additionally, this disables Watcher from the main
x-pack test cluster and consolidates the stop/start logic
for the tests listed.
No changes to the tests (beyond moving them) are included.
3rd party tests and doc tests (which also touch Watcher)
are not included in the changes here.
* Smarter copying of the rest specs and tests (#52114)
This PR addresses the unnecessary copying of the rest specs and allows
for better semantics for which specs and tests are copied. By default
the rest specs will get copied if the project applies
`elasticsearch.standalone-rest-test` or `esplugin` and the project
has rest tests or you configure the custom extension `restResources`.
This PR also removes the need for dozens of places where the x-pack
specs were copied by supporting copying of the x-pack rest specs too.
The plugin/task introduced here can also copy the rest tests to the
local project through a similar configuration.
The new plugin/task allows a user to minimize the surface area of
which rest specs are copied. Per project can be configured to include
only a subset of the specs (or tests). Configuring a project to only
copy the specs when actually needed should help with build cache hit
rates since we can better define what is actually in use.
However, project level optimizations for build cache hit rates are
not included with this PR.
Also, with this PR you can no longer use the includePackaged flag on
integTest task.
The following items are included in this PR:
* new plugin: `elasticsearch.rest-resources`
* new tasks: CopyRestApiTask and CopyRestTestsTask - performs the copy
* new extension 'restResources'
```
restResources {
restApi {
includeCore 'foo' , 'bar' //will include the core specs that start with foo and bar
includeXpack 'baz' //will include x-pack specs that start with baz
}
restTests {
includeCore 'foo', 'bar' //will include the core tests that start with foo and bar
includeXpack 'baz' //will include the x-pack tests that start with baz
}
}
```
Backport of #52542.
This commit is part of issue #40366 to remove disabled Xlint warnings
from gradle files. In particular, it removes the Xlint exclusions from
the following files:
- benchmarks/build.gradle
- client/client-benchmark-noop-api-plugin/build.gradle
- x-pack/qa/rolling-upgrade/build.gradle
- x-pack/qa/third-party/active-directory/build.gradle
- modules/transport-netty4/build.gradle
For the first three files no code adjustments were needed. For
x-pack/qa/third-party/active-directory move the suppression at the code
level. For transport-netty4 replace the variable arguments with
ArrayLists and remove any redundant casts.
ML mappings and index templates have so far been created
programmatically. While this had its merits due to static typing,
there is consensus it would be clear to maintain those in json files.
In addition, we are going to adding ILM policies to these indices
and the component for a plugin to register ILM policies is
`IndexTemplateRegistry`. It expects the templates to be in resource
json files.
For the above reasons this commit refactors ML mappings and index
templates into json resource files that are registered via
`MlIndexTemplateRegistry`.
Backport of #51765
Ironically PreventFailingBuildIT.testSoThatTestsDoNotFail is causing failures
as documented in #52197. The no longer serves a purpose and can now be removed.
Backport: #52139
In the rolling upgrade tests, watcher is manually executed,
in rare scenarios this happens before watcher is started,
resulting in the manual execution to fail.
Relates to #33185
set watcher logger to debug level.
These tests haven't run in such a long time,
we first need to get a better picture how/if
these tests fail today.
Backport of #51478
See #33185
Prior to the change the watcher index listener didn't implement the
`postIndex(ShardId, Engine.Index, Engine.IndexResult)` method. This
caused document level exceptions like VersionConflictEngineException
to be ignored. This commit fixes this.
The watcher indexing listener did implement the `postIndex(ShardId, Engine.Index, Exception)`
method, but that only handles engine level exceptions.
This change also unmutes the SmokeTestWatcherTestSuiteIT#testMonitorClusterHealth test again.
Relates to #32299
Previously this test failed waiting for yellow:
https://gradle-enterprise.elastic.co/s/fv55holsa36tg/console-log#L2676
Oddly cluster health returned red status, but there were no unassigned, relocating or initializing shards.
Placed the waiting for green in a try-catch block, so that when this fails again then cluster state gets printed.
Relates to #48381
This change adds a new `kibana_admin` role, and deprecates
the old `kibana_user` and`kibana_dashboard_only_user`roles.
The deprecation is implemented via a new reserved metadata
attribute, which can be consumed from the API and also triggers
deprecation logging when used (by a user authenticating to
Elasticsearch).
Some docs have been updated to avoid references to these
deprecated roles.
Backport of: #46456
Co-authored-by: Larry Gregory <lgregorydev@gmail.com>
Previously custom realms were limited in what services and components
they had easy access to. It was possible to work around this because a
security extension is packaged within a Plugin, so there were ways to
store this components in static/SetOnce variables and access them from
the realm, but those techniques were fragile, undocumented and
difficult to discover.
This change includes key services as an argument to most of the methods
on SecurityExtension so that custom realm / role provider authors can
have easy access to them.
Backport of: #50534
Some changes had to be made in order to make the test pass due to the removal or types.
Added some more assertions. The failure description in this comment [0] indicates that the rest handler couldn't be found. The test passes now.
I plan to merge this into master and see how CI reacts, if it handles this change well then I will also unmute this test in 7 dot x branch.
Also check watch count after stopping watcher in test teardown and
disabled slm in smoke test watcher qa test.
Relates to #41172
0: https://github.com/elastic/elasticsearch/issues/41172#issuecomment-496993976
* Update remote cluster stats to support simple mode (#49961)
Remote cluster stats API currently only returns useful information if
the strategy in use is the SNIFF mode. This PR modifies the API to
provide relevant information if the user is in the SIMPLE mode. This
information is the configured addresses, max socket connections, and
open socket connections.
* Send hostname in SNI header in simple remote mode (#50247)
Currently an intermediate proxy must route conncctions to the
appropriate remote cluster when using simple mode. This commit offers
a additional mechanism for the proxy to route the connections by
including the hostname in the TLS SNI header.
* Rename the remote connection mode simple to proxy (#50291)
This commit renames the simple connection mode to the proxy connection
mode for remote cluster connections. In order to do this, the mode specific
settings which we namespaced by their mode (ex: sniff.seed and
proxy.addresses) have been reverted.
* Modify proxy mode to support a single address (#50391)
Currently, the remote proxy connection mode uses a list setting for the
proxy address. This commit modifies this so that the setting is
proxy_address and only supports a single remote proxy address.
In the yaml cluster upgrade tests, we start a scroll in a mixed-version cluster,
then attempt to continue the scroll after the upgrade is complete. This test
occasionally fails because the scroll can expire before the cluster is done
upgrading.
The current scroll keep-alive time 5m. This PR bumps it to 10m, which gives a
good buffer since in failing tests the time was only exceeded by ~30 seconds.
Addresses #46529.
The testclusters shutdown code was killing child processes
of the ES JVM before the ES JVM. This causes any running
ML jobs to be recorded as failed, as the ES JVM notices that
they have disconnected from it without being told to stop,
as they would if they crashed. In many test suites this
doesn't matter because the test cluster will never be
restarted, but in the case of upgrade tests it makes it
impossible to test what happens when an ML job is running
at the time of the upgrade.
This change reverses the order of killing the ES process
tree such that the parent processes are killed before their
children. A list of children is stored before killing the
parent so that they can subsequently be killed (if they
don't exit by themselves as a side effect of the parent
dying).
Backport of #50175
This commit back ports three commits related to enabling the simple
connection strategy.
Allow simple connection strategy to be configured (#49066)
Currently the simple connection strategy only exists in the code. It
cannot be configured. This commit moves in the direction of allowing it
to be configured. It introduces settings for the addresses and socket
count. Additionally it introduces new settings for the sniff strategy
so that the more generic number of connections and seed node settings
can be deprecated.
The simple settings are not yet registered as the registration is
dependent on follow-up work to validate the settings.
Ensure at least 1 seed configured in remote test (#49389)
This fixes#49384. Currently when we select a random subset of seed
nodes from a list, it is possible for 0 seeds to be selected. This test
depends on at least 1 seed being selected.
Add the simple strategy to cluster settings (#49414)
This is related to #49067. This commit adds the simple connection
strategy settings and strategy mode setting to the cluster settings
registry. With these changes, the simple connection mode can be used.
Additionally, it adds validation to ensure that settings cannot be
misconfigured.
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
The timeout was increased to 60s to allow this test more time to reach a
yellow state. However, the test will still on occasion fail even with the
60s timeout.
Related: #48381
Related: #48434
Related: #47950
Related: #40178
This commit introduces a consistent, and type-safe manner for handling
global build parameters through out our build logic. Primarily this
replaces the existing usages of extra properties with static accessors.
It also introduces and explicit API for initialization and mutation of
any such parameters, as well as better error handling for uninitialized
or eager access of parameter values.
Closes#42042
Previous behavior while copying HTTP headers to the ThreadContext,
would allow multiple HTTP headers with the same name, handling only
the first occurrence and disregarding the rest of the values. This
can be confusing when dealing with multiple Headers as it is not
obvious which value is read and which ones are silently dropped.
According to RFC-7230, a client must not send multiple header fields
with the same field name in a HTTP message, unless the entire field
value for this header is defined as a comma separated list or this
specific header is a well-known exception.
This commits changes the behavior in order to be more compliant to
the aforementioned RFC by requiring the classes that implement
ActionPlugin to declare if a header can be multi-valued or not when
registering this header to be copied over to the ThreadContext in
ActionPlugin#getRestHeaders.
If the header is allowed to be multivalued, then all such headers
are read from the HTTP request and their values get concatenated in
a comma-separated string.
If the header is not allowed to be multivalued, and the HTTP
request contains multiple such Headers with different values, the
request is rejected with a 400 status.
Lee Hinman
Rene Groeschke
Mark Vieira
Ioannis Kakavas
Armin Braun
David Roberts
David Turner
Rene Groeschke
Hendrik Muhs
Julie Tibshirani
Larry Gregory
Tal Levy
William Brafford
Tanguy Leroux
Igor Motov
Jake Landis
Ryan Ernst
Maria Ralli
Jason Tedor
Benjamin Trent
Gordon Brown
Nik Everett
Dimitris Athanasiou
Jay Modi
Przemysław Witek
Martijn van Groningen
Marios Trivyzas
David Kyle
Nhat Nguyen
Albert Zaharovits
Yannick Welsch
Tim Vernum
Tim Brooks
Rory Hunter